What kind of lathe are you converting out of curiosity? I just bought a CNC lathe to retrofit and I plan to use mesa cards again. Good luck with your build. Peace
Pete On Wed, Oct 29, 2014 at 12:33 PM, <p...@wpnet.us> wrote: > I've messed with this a bit and don't have it working yet. Attached is my > current hal file hacked together from PNCConf generated bits, bits from > docs and manual bits (don't laugh, I'll clean it up once I get everything > working). The steps are all set to 0.1 just to ensure that even if the > selection isn't selecting the one I think I'd at least get visible motion. > Below is the summary of the hardware configuration. > > The pendant MPG is a basic 100ppr 5V MPG. I've validated it's output with > my 'scope (haven't got the hang of halscope yet). It is wired with A and B > outputs connected to the MESA 7i76 GPIO #16 and #17. > > The pendant has two 4 pos rotary switches as follows: > > Axis select > 1 - Off - n.c. > 2 - X - MESA 7i76 GPIO #20 > 3 - Z - MESA 7i76 GPIO #21 > 4 - Aux - MESA 7i76 GPIO #22 > > Step select > > 1 - 0.1 - MESA 7i76 GPIO #24 > 2 - 0.01 - MESA 7i76 GPIO #25 > 3 - 0.001 - MESA 7i76 GPIO #26 > 4 - 0.0001 - MESA 7i76 GPIO #27 > > Using halcmd show I've validated the switch inputs are working properly. > > Any idea what may be wrong? > > ------Original Mail------ > From: <p...@wpnet.us> > To: <emc-users@lists.sourceforge.net> > Sent: Mon, 27 Oct 2014 16:16:15 -0500 > Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76 > > ------Original Mail------ > From: "Peter C. Wallace" <p...@mesanet.com> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: Mon, 27 Oct 2014 14:03:16 -0700 PDT > Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76 > > ... > > > There's a brief mention on page 18 in the mode options > > That is indeed brief. Well, I've got a direction now and a bunch of docs > to read through and try to mesh. Hopefully I'll have it working this > evening :) > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Pete Matos A and N Precision and Fabrication Maryville, Tennessee 865-236-8996 ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
