I took a look at the files you sent me off-list and I suspect the issue
is that you have two [HALUI] sections, one in the ini file and one in
layout2.inc. If you combine the two sections it will probably work.
Could anyone else here confirm that having two sections with the same
name is problematic?
Les
On 12/07/2021 18:43, John Dammeyer wrote:
I uncommented them but they don't show up in the hal config. Only the first 16
from 00 to 15 from the pendant.m Just went out to the shop and checked that
again.
Looking at the expanded ini the #INCLUDE layout2.inc is at the front of the ini
file. It's there so that the hard coded pendant MDI_COMMAND numbers assigned
numbers match.
Then under the [halui] I have the two additional MD_COMMAND lines. Those don't
show up in the hal config. And that's where I got stuck.
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users