I can easily try that to see what happens. Give me a few minutes. John
> -----Original Message----- > From: Les Newell [mailto:les.new...@fastmail.co.uk] > Sent: July-12-21 2:29 PM > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] 'automatically' go halfway between 2 points > > I took a look at the files you sent me off-list and I suspect the issue > is that you have two [HALUI] sections, one in the ini file and one in > layout2.inc. If you combine the two sections it will probably work. > > Could anyone else here confirm that having two sections with the same > name is problematic? > > Les > > > > On 12/07/2021 18:43, John Dammeyer wrote: > > I uncommented them but they don't show up in the hal config. Only the > > first 16 from 00 to 15 from the pendant.m Just went out > to the shop and checked that again. > > > > Looking at the expanded ini the #INCLUDE layout2.inc is at the front of the > > ini file. It's there so that the hard coded pendant > MDI_COMMAND numbers assigned numbers match. > > > > Then under the [halui] I have the two additional MD_COMMAND lines. Those > > don't show up in the hal config. And that's where I > got stuck. > > > > John > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
