ttl, mss etc + http over netrom, ax.25
Does anyone have any suggested window size mss for http smtp via netrom/ax.25? For that matter, how about good default timeout values for sendmail, etc AND is there a way to increase timeouts for Netscape and Arena? Lynx seems to behave well. tnx - jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
RE: Popagation analysis + Linux?
I don't think I did any y2k checking on this box and uptime showed 38 days etcsomething got hosed after 12/31 and simply restarting the KDE panel and KMail corrected the date error Quite strange as my bash prompt is PS1="[\t][\u@\h:\w]$" and the clock is staring me in the face every time I'm at CLI. No other programs gave me grief except KMail and even two other systems running KDE and KMail never burped. jk On Fri, 28 Jan 2000, Hast, Chuck wrote: I just noticed the same, since I sort by D/T of arrival I did not get those messages at the bottom of the stack, but I went in and looked and all of his messages are dated last year B-b ----- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
RE: Popagation analysis + Linux?
But you don't need it for ham work. Contact V-Soft or RadioSoft...I believe they both support the USGS 30m TED. On Thu, 27 Jan 2000, Hast, Chuck wrote: Ahh but some of us do need to work at those higher resolutions, particularly with UHF and VHF... - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Baycom + QST MX614 modem
A few of you asked for copies of the January 2000 issue of QST's MX614 packet modem article. I have scanned and zipped it to "http://www.rio.com/~kg7fu/qst0100.zip" (Since this is copywritten material, it will only stay on this site for a few days. This is a service to a few EU hams, as QST is not distributed to newsstands in most countries anymore, not an intentional breech of copyright laws. May I suggest some of you DL and PA hams pool your resources and get a subscription to QST yourselves? (no offense intended!)) Beware! These are full-sized scans, so the zip file is nearly 4.5MB. I'm not going to re-post my modifications and suggestions, except for the most obvious; use ferrite beads, probably 43 material, on all the data, audio and control lines at the PCB or this thing will sing like a suckling pig just before a Luau! The original post may be found at "http://www.hes.iki.fi/archive/linux-hams/21/0005.html" Also at "http://www.rio.com/~kg7fu/ad2.zip" is a few pics of the inside of a Yaesu (Welz) AD-2 2m - 70cm "duplexer" (the CORRECT term is diplexer) with a hand-drawn schematic and parts list. Be sure to check the pages at "http://www.rio.com/~kg7fu/home.html" occaisionally for new and interesting ham radio topics and information and other stuph. Enjoy! - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Popagation analysis + Linux?
That's weird kg7fu@p133p:~ date Thu Jan 27 21:18:29 GMT 2000 Restarted the KDE panel and things look a bit better. BTW I sort by received date...eliminates problems by dyslexic boneheads like me! jk Tim Dawson wrote about Re: Popagation analysis + Linux?: FYI, your clock is a year behind. This message came in dated Jan 27, 1999, and hence sorted as last of 700 in my mailbox, despite being new. You may want to consider correcting this . . . FWIW, Tim But you don't need it for ham work. Contact V-Soft or RadioSoft...I believe they both support the USGS 30m TED. On Thu, 27 Jan 2000, Hast, Chuck wrote: Ahh but some of us do need to work at those higher resolutions, particularly with UHF and VHF... - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - -- Tim Dawson ([EMAIL PROTECTED])Owner/Engineer TPC ServicesBellnet: (972)-221-7385 Lewisville, Texas 75067 FAXnet: (972)-221-0393 "The world is complex. Sendmail.cf reflects this" -- ----- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Popagation analysis + Linux?
Unless things have changed significantly, the computing power required to do *accurate*, MS, Tropo EME predictions is well beyond that of the average ham and his/her PC. Interesting idea though, one could guage LOS terrestrial QSO possibilities by keeping tabs on grids referenced say to an mheard.dat file. jk On Wed, 26 Jan 2000, John R. Moseby wrote: I don't know if this helps, but I have thought that would be interesting to add topographic and propagation capabilities to an APRS tool like Xastir. This would give somewhat automatic data input to the tool from the remote stations themselves and the possibility of realtime analysis of mobiles. Of course this could work equally well for both HF and other bands. Now if APRS stations just reported operating frequencies you could hunt down that friend you were looking for or find someone in that grid square / county / country you needed, and actually have an idea if propagation is favorable for a contact! Unfortunately, I'm not a proficient programmer either. John W9OHT - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Popagation analysis + Linux?
Like I said before, 1ft/pix is way overdone for ham stuff. Unless you're into 3D-Ray Tracing at frequencies above say 10GHz outdoors or low-power SS around 2-10GHz indoors you'd be wasting your time with resolutions with that much detail. I like the grass idea. I think I saw a point-source model using sphere's around 1mm in diameter. jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Gregory Maxwell [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, January 26, 2000 7:36 PM Subject: Re: Popagation analysis + Linux? On Wed, 26 Jan 2000, Mike Werner wrote: You're talking about downloadable topographic information? If so: http://edc.usgs.gov/doc/edchome/ndcdb/ndcdb.html The USGS has available a file type called DEM (Digital Elevation Model) that can be used to generate topo maps. Dad uses 'em all the time - but he uses Windoze. I do remember seeing some Linux stuff that could use DEM's - kept meaning to grab one and give it a whirl. There's a few other file types available on that site as well - but I don't know what they are. I can try and pick Dad's brain about 'em next chance I get, if this seems to be the type of thing you're looking for. You might also want to check in with your local municipalities. I work for Martin County, Florida and I believe (not sure, I'm a network guy not a GIS guy) our GIS datasets include 1ft/pixel raster topo for the entire county. We also have other useful data for our county, like FCC data for tower locations and assoiated info. Such localized data would be good for high speed, short distance stuff providing it's of sufficent accuracy. It would be intresting to see someone code a module for Grass for doing propragation studies. Such computation used to be impossible without supercomputers, but I imageine that with systems today, it wouldn't be outside of the reach of a highend desktop. (I say this, as I'm sitting at an Athlon 550 training a vector-quantization codebook on a 450MB dataset for the vorbis audio coder :) )..
Popagation analysis + Linux?
Has anyone any tools for site, coverage and path analysis for Linux? If not, I'd like to get together with some of you seasoned programmers. I have some excellent ideas and resources for propagation models, etc. - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
HOWTO ax.25 + firewall [Was Re: Subject: sendmail + masq/ipfw solutions for multi-user system?]
Thanks for all the great replies on sendmail and DNS! I have some direction now, but still am confused about how to configure my lan vs. my ampernet. First, my lan is already working well, using 2.0.36 + ipfwadm + masq and 192.168.x.x addresses. We use a dial-on-demand ppp connection, bit it is usually up 24 hours a day. I could leave it this way or change to 2.2.x like my other Linux boxes on the lan. So, do I re-address all the workstations to 44.26.x.x and continue to run as normal? Do I use ip alising and give the ax.25 boxes secondary or prinmary 192.168 addresses? Do I use ipip and create dummy devices? Do I add a 2n nic to the firewall and route 44.26.x.x differently than 192.168.x.x? Second, I'd like sendmail or whatever MTA I end up with being able to handle connections to the internet as well as smtp via radio without too much effort. My guess is the key would be to decide first which scheme to use above. Thanks, - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Subject: sendmail + masq/ipfw solutions for multi-user system?
On Tue, 18 Jan 2000, [EMAIL PROTECTED] wrote: If sendmail is too tough, try 'exim' or 'postfix'. They're both quite powerful, and easier than sendmail to configure. Perhaps I wasn't clear Does there exist a "how-to", examples or explicit instructions on how to use sendmail for radio amprnet, radio pbbs, local delivery and internet delivery ALL on the same box? The AX25-HOWTO was never going to cover that material. It is adequately covered in other HOWTO documents. Try the Networking and IP-Chains HOWTO's From what I see, the networking and ip chains howto's are meant for seasoned sysadmins and/or hardcore programmers. There just ain't much in the way of "english language" material for the non-programmer/non-nethead. Again, does there exist any docs on how to ip forward/gateway radio amprnet services with kernel 2.2.x? The domain.txt file, I think (it's been a good number of years since I ran NOS) is just the equivalent of the /etc/hosts file. It is. However, I can't seem to find any resources to utilize such information. The closest I've seen is the DNS-HOWTO, again does not provide any assistance for ham radio folks who don't have Ph.D's in net-speak or c++-speak. Can anyone tell me how to configure BIND so amprnet lookups work while not breaking real internet DNS? I personally think you'd be better off fixing the actual problem though (the DNS problem or whatever it actually is) than naiively working around it with manual name-address mappings. Ok, I'll bite. How do I fix it? One problem is my isp's DNS has an entry: Server: ns1.rio.com Address: 206.96.130.10 Non-authoritative answer: 0.1.26.44.in-addr.arpa name = crv.lan.ampr.org Authoritative answers can be found from: 44.IN-ADDR.ARPA nameserver = hamradio.ucsd.edu etc. But a traceroute from rio.com reveals no route to host, thusly: traceroute to 44.26.1.0 (44.26.1.0), 30 hops max, 40 byte packets 1 gatekeeper (206.96.130.254) 1 ms 1 ms 1 ms snip 10 sdsc-gw.san-bb1.cerf.net (134.24.12.26) 406 ms 380 ms 439 ms 11 192.12.207.5 (192.12.207.5) 406 ms 471 ms 439 ms 12 muir-rs-backbone.ucsd.edu (132.239.254.11) 469 ms 386 ms 386 ms 13 ampr.org (44.0.0.1) 381 ms * 465 ms 14 * * * Correct me if I'm wrong, but aren't address groups such as 192.168 and 44.0 considered "private" nets and technically aren't supposed to be routed via internet? Even if they were, the ampr.org docs clearly state that 44.26.1.0 is for "testing" and is not to be assigned. AND, why does the rest of the world know to route 44.26.1.0 to ucsd.edu/ampr.org, yet ampr.org doesn't have it? My local net just happens to be 44.26.1see what the problem is now? Like I've been saying, I'm neither a programmer nor a seasoned net professional. As such, I need a bit more "1-2-3..." guidance than some of you. I'm sure by the posts I see here that there are many more "Linux Newbies", new hams, hams new to packet and just plain old dumb hams like myself that would be more inclined to get heavily into ax.25 networking, instead of turned off, if it weren't for the lack of simplistic docs and negative responses from a few vocal, but harsh, hams-in-the-know. I have a myriad of great ideas, application deviations and enthusiasm for amateur packet. I also have a great deal of real-world RF experiences to share and relate to after being a broadcast engineer, microwave maintenance technician and been doing packet radio almost since it's inception. I would happily toss Linux ax.25 stuff for DOS or Windows if those platforms offerings would suit my needs. I have the greatest respect and admiration for all the programmers and individuals who have made Linux what it is. I'm continually bafflled by the responses some programmers and "experts" give to reasonable questions from folks who don't quite have the same level of understanding, experience or education as they. - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
sendmail .ampr.org mail
sendmail tries to connect to outside mailers via their port 113, systems such as W0RLI's snos don't like that. Plus, addresses like [EMAIL PROTECTED] are dumped by sendmail. Is there a better way or a definitive configuration for mail gatewaying? Tia - jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Packet Terminal RFC [was Re: Packet Terminal Program]
Ideally, a "dumb-user" application will have those desireable operating features plus the following: a) ability to do tnc command mode e.g. not just KISS mode. b) easy to install, no wierd lib dependancies or complicated scripting. c) built with X awarness in mind, if we want an X front-end too. d) "hot keys" for user specified commands external scripting. e) support or awarness for compression, both during connects and post e.g. ZTelnet and 7-Plus. jk ------------- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Matthias Hensler [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, December 14, 1999 3:40 PM Subject: Re: Packet Terminal Program TNT uses textmode and so it can be used over telnet. Additionally an console application exists, which can be used to connect and maintain TNT. TNT should have all features you request, and a new stable version will appear soon. On the other side you also can run X-programs like LinKT, by setting DISPLAY enviroment variable in your telnet session.
Re: ax25 help
Brian, You need to read the (somewhat outdated) AX.25-HOWTO and the docs for your NOS. I am running several nodes with CLX packet cluster, http, smtp, irc, ftp, telnet etc. Each PC and each installation is unique, so help is difficult without detailed info on your troubles. For first steps, I suggest reading the FAQ's and HOWTO's until you can recite them in your sleep, then un-tar and install your packages. One of the more common problems is correct file/directory permissions. E-mail me off the list if you like, but I'm no expert and no programmer! gl de James KG7FU - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Brian [EMAIL PROTECTED] To: linux-hams [EMAIL PROTECTED] Sent: Tuesday, December 14, 1999 7:00 PM Subject: ax25 help Are there any stateside hams who have had success running the ax25 stuff in Linux? It seems all the development and examples are European or VK/ZL. Which is good for them. There is not much packet activity here in Houston, and even less NOS operation. I'm convinced it can be done (HI) I just need a bit of help installing the files in the right places and fine tuning them for my installation. Please, those who want to rant about RTFM, just address that to /dev/null. I have a 386SX with Redhat 5.2 and the AX25 stuff compiled in the kernel. Some of the files go into /etc, and I guess some go into /etc/ax25. Somehow, the whole thing is started by a script somewhere. I want to run on a single tnc on VHF and would like to run the JNOS type operation, that is available in the kernel. I'm not looking to link into ethernet and other ports (yet). Any elmer would be appreciated. Reply to me to keep the traffic on this reflector to a reasonable level. TNX Brian N5BA [EMAIL PROTECTED]
Re: off topic...contact for Chuck Harrington
So, give me a packet terminal for Linux that's ax.25 and tnc commands aware. I'm not a programmer, but I'll gladly provdide you with a features list if you are! cul - jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Richard Adams [EMAIL PROTECTED] Use Linux its free and whats more you can maintain it yourself. ;-)
off topic...contact for Chuck Harrington
Does anyone know how to get ahold of the latest version of PacketPet for Windows or where to find Chuck Harrington Software, Inc. on the web? tia - jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Killing the console screen saver ?
You can probably leave the powersave out. Unless you have a laptop or kernel level support for power management (which is very poor for non-battery power). jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Steve Mc Donough [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, November 22, 1999 5:24 PM Subject: Re: Killing the console screen saver ? Hi James, I run RH6.0 with Jnos and was wondering myself how to get rid of the screen blanking and found the string on the Red Hat site to disable it. setterm -powersave off -blank 0 It worked on this end. By the way my Jnos has been up now for 83 days without a reboot and that reboot was due to a power failure. I run a 486dx2 with 32 megs with RH6. Hope this helps. 73 Steve At 07:55 PM 11/21/99 -0800, you wrote: tried 'setterm -blank 0' ?? jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: aa6qn [EMAIL PROTECTED] To: Linux-Hams [EMAIL PROTECTED]; NOS-BBS [EMAIL PROTECTED] Sent: Sunday, November 21, 1999 2:11 PM Subject: Killing the console screen saver ? Need to ask the Linux Guru's on how to kill the Linux console screen black out. Or, at least change the timing on it. I have a feeling that it may be part of my lockup problems. Was looking in the /etc/sysconfig but did not see anything regarding the console settings. For Richard, I am running RH6.0 with the linux kernel 2.2.13 on a Pentium 133 with 64meg ram. I tried several kernels and they all lock up after a bit. Hmmm, wonder if it is Jnos ? At one time I had it up for days without a problem. I am also posting this to the nos-bbs folks, in case they have some ideas as well. One thing of note is that while I am working on the console , or when someone is using the Squid cache, it seems not to lockup very often. Thank you to all those who responded to my kissattach query. 73, John
Re: QRZ! + node
Tnx TomiI know the essentials...unfortunately the linux app supplied with the CDROM has some old libc dependancies and acts "funny" suid root. AA7BQ just sent me this link with newer QRZ! apps for linuxhttp://qrz.com/files/qrzutils/qrzapps.html Downloaded it, but haven't checked it out yet. Regards, ----- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Tomi Manninen OH2BNS [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, October 29, 1999 2:12 AM Subject: Re: QRZ! + node On Thu, 28 Oct 1999, James S. Kaplan KG7FU wrote: Actually, I was looking to usse the cdrom and perhaps the unix/linux files supplied on it. If there is a command line tool to query a callsign then interfacing that to LinuxNode should be simple. Just use the extcmd facility, probably you want to use the "pipe" flag there. See the node.conf manual page. -- --- Tomi Manninen / [EMAIL PROTECTED] / OH2BNS @ OH2RBI.FIN.EU ---
Re: QRZ! + node
Thatks Jorge, Actually, I was looking to usse the cdrom and perhaps the unix/linux files supplied on it. Thanks again. - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Jorge Matias [EMAIL PROTECTED] To: James S. Kaplan KG7FU [EMAIL PROTECTED] Sent: Thursday, October 28, 1999 9:51 AM Subject: Re: QRZ! + node On Wed, 27 Oct 1999, James S. Kaplan KG7FU wrote: Has anyone succsessfully integrated some form of QRZ! CDROM callbook lookup with the "node" front-end application? I did. Here's the configuration: In the file /etc/ax25/node.conf add this line in Alias Section: Alias CAllbook 'telnet %{2:blues.hes.iki.fi} 1235 %1' You call the command with a callsign. That's it! You can write an help textfile for that command too. Regards, Jorge Matias (CT2HBZ)
QRZ! + node
Has anyone succsessfully integrated some form of QRZ! CDROM callbook lookup with the "node" front-end application? de kg7fu ----- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: Routing problem [was: ARP problem]
I'm also having trouble with ax25rtd. The maintainer has a patch for ax25utils, but I'm using rpm's from SuSE 6.2Anyone have binaries or a tarball they would share for 2.2.9 libc6? Similarly, rspfd-0.08 doesn't compile with libc6, depends on /usr/include/sys/socketio.h from an old libc. Anyone have solutions for this one? nrparms seems to be broken in the SuSE distribution also. nrparms -routes works as advertised. However, nrparms -nodes will not take input in any form, even from files saved with nodesave. - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: Robert Schelander [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Sunday, October 17, 1999 11:43 AM Subject: Re: Routing problem [was: ARP problem] Very good idea. Thank you. After looking at the docs of ax25rtd, I knew that this is exactly what I need. Here I think ax25rtd might help. I understand it is supposed to do just that hack automatically. I'm not sure however as I haven't used it. My "only" problem now is, that ax25rtd doesn't run. :( oe8rsq:/etc/ax25 # startproc /usr/sbin/ax25rtd bind Control socket: No such file or directory By the way, I've found in the manpage of axparms, that axparms -route add port callsign [digis] [-ipmode V|D] is able to set VC/Datagram from each route individually. ax25rtd goes a step further and is able to set it automatically to the mode the calling station uses. (unfortunately after the kernel sends the answer - not good if the other station uses this autoset too) Thanks Robert
port managemenet vs services?
I'm trying to get a bit further in my configuration than before. Basically, I need some advice on how to set up ports and nodes, etc. I have 3 9612 tnc's on ttyS0, ttyS1 and ttyS2, attached with mkiss and kissattach. They map out to: axttyhardware t1p1ttyq0tnc1 port1 t1p2ttyq1tnc1 port2 t2p1ttyq2tnc2 port1 t2p2ttyq3tnc2 port2 t3p3ttyq5tnc3 port2 I have no radio for tnc3 port1. The question is how to map netrom nodes and hardware ports. The tables below should give you an idea of what I'm up to: KG7FU radio ports (hardware) speed channel tnc+port descriptionin.axports 1200 145.06 t1p1 (1200 Baud) User Port t1p1 9600 223.700 t1p2 (9600 Baud) User Port and LAN (DXTMB) t1p2 1200 223.46 t2p1 (1200 Baud) CLX Link W7AT t2p1 9600 430.05 t2p2 (9600 Baud) LAN (SALEM) t2p2 (none 1200 none t3p1 (not active)) 9600 434.700 t3p2 (9600 Baud) User Port and LAN (CLXTST) t3p2 KG7FU virtual ports ssid hardware association program in /etc/ax25/ax25d.conf -1 t1p1 KG7FU-1:LBS /usr/sbin/node node -2 t1p1 KG7FU-2:EUGCLX /usr/local/clx/bin/net_usr net_usr -x %u -3 t1p1 KG7FU-4:ECHAT /usr/sbin/convers convers %u -4 t1p1 KG7FU-4:PMS /usr/sbin/pms pms -o %u kg7fu -5 t1p1 KG7FU-5:#AXSP /usr/sbin/axspawn axspawn %u -1? t1p2 KG7FU-1:LBS /usr/sbin/node node -6 t2p1 KG7FU-5:#CLX /usr/sbin/node node -1? t2p2 KG7FU-1:LBS /usr/bin/node node -1? t3p2 KG7FU-1:LBS /usr/sbin/node node In other words, I have a need for users connnecting to radio ports t1p1, t1p2 and t3p2 to all see kg7fu-1:LBS. This is to maintain compatibility with existing hardware nodes. I also want to provide additional services on t1p1 without having to resort to wampes or some other frontend. How would you accomplish this? tia - de KG7FU - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: SuSe Linux v6.2 question
Don't use SaX for configuring. Use XF86Setup and select a card based on the chipset manufacturer, NOT the card manufacturer. For the Diamond Stealth it's probably a S3 or S3V chipset. - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, October 07, 1999 2:36 PM Subject: Re: SuSe Linux v6.2 question My sincerest thanks to all that responded to my plea for help. I now have WuFTPD running satisfactorily, so I am on the home stretch. I still can't get the X-server operating correctly. I am running a "Diamond Stealth 3D-2000 Multimedia" (PCI) video board and no matter what I do, X-windows fails to work. I'm thinking of maybe pulling that board out and substituting a Matrox G400 or similar board. Hopefully I can gain some success on that last crucial stage of my SuSE install. I'd be grateful to hear your experiences with the X-server, specifically suggestions on how to overcome video board anomolies... Thanks in advance! 73, Gary, W7NTF
Re: SuSe Linux v6.2 question
Check /etc/inetd.conf Try commenting out the default ftp service and uncommenting either the wu.ftpd or proftpd lines. One or the other only! Kernel ax.25 stuff and clx work fb now... jk - James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? - - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, October 05, 1999 3:48 PM Subject: SuSe Linux v6.2 question Howdy, I recently installed SuSe Linux, v6.2, kernel 2.2.10, in hopes that I can get that iteration of our beloved operating system working with the AX25-utils, Net-tools, etc, so as to allow me to run native code while doing away with TNOS v2.30, which is no longer supported. I got the SuSe Linux package installed with minimum strain, and am impressed that things that were extremely difficult to get properly configured in RH and other versions of Linux are now accomplished with a few keyclicks in YaST. Specifically I am talking about PPP for use in setting up a full time internet to amateur packet radio gateway in the Tacoma metropolitan area, something which has been a dream of mine for a number of years... Well, I found that once everything was installed that FTP appeared not to be enabled and/or configured... Referring to the SuSe Linux v6.2 manul, there is supposed to be a menu in YaST to set FTP to active, set permissions, set paths, etc However I have not been able to reach the menu in question. Can someone help me on this? How do I configure and enable FTP? I am stuck until I can turn everything on. Thanks for your consideration. 73, Gary, W7NTF
netrom and 2.2.x kernels
I know it's been posted before... Could someone please refresh me with archived messages and/or a rundown on "how-to" netrom nodes with 2.2.x kernels? Running SuSE 6.2 beta 2 (Kai?) Thanks, ----- James S. Kaplan KG7FU Eugene Oregon USA [EMAIL PROTECTED] http://www.rio.com/~kg7fu ICQ # 1227639 Have YOU tried Linux today? -
Re: WOW
Don't feel bad...no one knows how to get two soundblasters going with 2.2.x kernels either! KG7FU - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, August 04, 1999 7:03 AM Subject: WOW Gee! Cant beleive it! Not one answer to my request for help with my Routing problem. hmmm
2 Soundcards with 2.2.x
With 2.0.36 adding a few lines to autoconf.h with a second soundblaster's settings gets it compiled and functional. How do you accomplish it with 2.2.x? James Kaplan KG7FU Eugene, Oregon
Re: ARRL Handbook on CD
ghostview, xpdf, acrobat reader and several other X apps do a fine job with .pdf's. Interesting note, .pdf is merely .ps with LZW compression. jk