Re: [AFMUG] M series NanoBeam/PowerBeam and U-NII-1

I just spent an hour looking for a table like that on the ubnt forums. Came back and there it is! Thanks! On Thu, Dec 17, 2015 at 11:02 AM, Eric Kuhnke wrote: > Max Tx power is only 18 or 19 at 64QAM 5/6 on a "M" series 802.11n 2x2 > ubnt radio anyhow... So it's not a terribly disaster for PTP

Re: [AFMUG] MDU deployments. Can you make any money on them?

So you use a diplexer and run broadband over the same coax as dish/cable tv? On Wed, Dec 16, 2015 at 11:47 PM, George Skorup wrote: > Custom EoC modems tuned/filtered to something like 5-40MHz. Can't use MoCA > (>950MHz) when we're mixed with L-band on the same network (we're also a > DISH Netwo

Re: [AFMUG] Netflix updating content with better encoding

: > Oversubscribed? Define that. His public IP is on a /12 subnet. I don't > understand how they can do that. I think they typically put up to 500 > subscribers on a hub. > > bp > > > > On 12/16/2015 8:46 AM, Jeremy wrote: > > Is he in an oversubscribed area? Netflix will

Re: [AFMUG] Netflix updating content with better encoding

Is he in an oversubscribed area? Netflix will send you higher resolutions based on your speed. On Wed, Dec 16, 2015 at 9:44 AM, Bill Prince wrote: > Was talking to a friend who lives in town (and is on Comcast). He was > noticing that "some" of the content he was downloading from Netflix was >

Re: [AFMUG] M series NanoBeam/PowerBeam and U-NII-1

Requesting a key is simple. I requested a key and a few hundred stickers months ago. The frequencies are there on 5.6.3, with an unlock key. Once you unlock them then they also lower the output power to the new FCC rules, so you may want to selectively unlock in the areas where you need the addi

Re: [AFMUG] AF5x and GIGEAPC-HV compatibility

Using GIGE-POE-APC for them here and they run at GigE On Tue, Dec 15, 2015 at 4:56 PM, Mathew Howard wrote: > No, but we do have a few running on GIGE-POE-APC. We also have an AF5 and > an AF24 running on GIGEAPC-HV with no issues. > > On Tue, Dec 15, 2015 at 5:53 PM, Josh Luthman > wrote: > >>

Re: [AFMUG] Calculating depreciation

I let my accounts figure it out as well. Some items (core network equipment, switches, routers, etc.) are depreciated over 5 years, and some over 3 years. If I had to deal with all of this I'd likely throw in the towel. A good accountant is worth their weight in gold. On Sat, Dec 12, 2015 at 12

Re: [AFMUG] Feeling Christmas spirit

This guy wins Christmas. On Fri, Dec 11, 2015 at 1:03 PM, Sean Heskett wrote: > bwahahahahaha nice! > > On Fri, Dec 11, 2015 at 9:34 AM, Jaime Solorza > wrote: > >> Have a great weekend guys >> > >

Re: [AFMUG] TV

> <mailto:ch...@wbmfg.com <mailto:ch...@wbmfg.com>>> wrote: >> >> >> >> Me... >> >> >> >> Offlist if you want to get into the nitty gritty. >> >> >> >> *From:*Rory Cona

Re: [AFMUG] TV

M >>> >>> *To:*af@afmug.com <mailto:af@afmug.com> >>> >>> *Subject:*Re: [AFMUG] TV >>> >>> Interesting. Who do I need to talk to about this? >>> >>> Rory >>> >>> *From:*Af [mailto:af-boun.

Re: [AFMUG] TV

When I talked to them they had East coast or West coast locals. So the times would not be the same as your local channels, but you could still get ABC, NBC, and CBS. On Thu, Dec 10, 2015 at 9:38 AM, Chuck McCown wrote: > If your wireless can support Netflix, it will support RealchoiceTV. > Yes,

Re: [AFMUG] Need new billing solution asap!!!

t's to be a little in depth and probably a loaded >>>>>> question...but I know when we moved to Powercode the old team that wasn't >>>>>> very good had it done in one afternoon. This was from Quickbooks. >>>>>> >>>>>>

Re: [AFMUG] OT - which religion should I join (was which gun toby)...

;> i have a Glock23 .40cal works great but it's not quite a "conceal >>> carry" >>> >> size. I have it (unloaded and trigger locked) in my survival pack >>> that >>> >> stays in my airplane incase of an emergency landing in the back

Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why

Not since 1968 On Mon, Dec 7, 2015 at 9:17 AM, Chuck McCown wrote: > Can you legally own hand grenades? > > *From:* Mathew Howard > *Sent:* Monday, December 07, 2015 9:15 AM > *To:* af > *Subject:* Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy > and why > > you do if you want to

Re: [AFMUG] WAY OT: Concealed Carry handguns - which to buy and why

A lot of people are carrying a gun that has no safety. The safety is released by squeezing the trigger, essentially. I have kids, and although I plan to keep my gun far away from them, I cannot on a clear conscience carry a gun with no safety. I have been considering a revolver. My bro has a CC

Re: [AFMUG] Recommended platform for voip service platform?

I have really liked Netsapiens. I don't have experience with anything else though. I mostly chose it over ipiphony for the ability to host it in-house. On Mon, Dec 7, 2015 at 6:35 AM, Craig Schmaderer wrote: > When you say intgrate do you mean auto import of billing data or can you > provision

Re: [AFMUG] Need new billing solution asap!!!

He also said that he could add functionality to your existing platform (Powercode in my case), using html code, say in the 'Notes' section of each account and such. On Sat, Dec 5, 2015 at 8:04 AM, Jeremy wrote: > Yeah, it was pretty basic when I saw it at AF. He talked about it l

Re: [AFMUG] Need new billing solution asap!!!

15 4:25:07 PM >>> *Subject: *Re: [AFMUG] Need new billing solution asap!!! >>> >>> Anyone know how to login to his demo? >>> >>> Regards, >>> Chuck >>> >>> On Fri, Dec 4, 2015 at 11:28 AM, Simon Westlake < >>> simon@s

Re: [AFMUG] Need new billing solution asap!!!

Isn't Spencer Lambert's web front-end free? Last time I saw him at Animal Farm he was touting it and said he would help with setup and customization at a flat rate of $100/hr. He is located in Utah, also. If you want something cheap or free that may be an option. It would probably be worth cont

Re: [AFMUG] AF2 question

It would allow back-to-back frequency reuse. On Thu, Dec 3, 2015 at 8:28 PM, Jaime Solorza wrote: > What does the GPS do for a 2.4GHz point to point ? I have not played with > OS so I have no idea. Thanks in advance. >

Re: [AFMUG] Cybermonday

Double speed permanently or for how long? On Tue, Dec 1, 2015 at 11:31 AM, Gino Villarini wrote: > double speed on the basic plan (7/1 to 14/2) $59.95 plus free install > > On Tue, Dec 1, 2015 at 11:24 AM, Josh Reynolds > wrote: > >> What was the promo? >> On Dec 1, 2015 8:11 AM, "Gino Villarin

Re: [AFMUG] Cybermonday

Next year! On Tue, Dec 1, 2015 at 9:06 AM, Rory Conaway wrote: > Good idea. > > > > > > *Rory Conaway **• Triad Wireless •** CEO* > > *4226 S. 37th Street • Phoenix • AZ 85040* > > *602-426-0542 <602-426-0542>* > > *r...@triadwireless.net * > > *www.triadwireless.net

Re: [AFMUG] Work boots

I have been wearing Danner boots for the last year, and loved them. Looking to get a new pair for XMAS (are you listening Santa??) On Sun, Nov 29, 2015 at 2:19 PM, Paul Stewart wrote: > No, I always stuck with Caterpillar for years… last pair I bought (last > year) took about a week though to wo

Re: [AFMUG] Florida WISPS

> *From:* Af [mailto:af-boun...@afmug.com ] *On > Behalf Of *Adam Moffett > *Sent:* Sunday, November 29, 2015 8:57 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Florida WISPS > > > > Like Brian Webster explained earlier: If they service a road touching > that censu

Re: [AFMUG] Florida WISPS

Comcast claims the same thing for the entire state of Utah...including on mountaintop peaks. On Sat, Nov 28, 2015 at 4:48 PM, Tyler Treat wrote: > Yeah I'm not sure how CWLP claims gigabit in the entirety of Chatham. > > ___ > Mangled by my iPhone. > _

Re: [AFMUG] Florida WISPS

http://floridabroadband.com/ ...not sure if Paul covers Naples or not. On Wed, Nov 25, 2015 at 4:04 PM, Steve wrote: > > Any Florida WISPS out there? Around the Naples area? Just curious > because we have been looking for a startup area but it looks pretty covered > by Cable/DSL. But so much

Re: [AFMUG] Powercode dead?? No answer

5373 > > On Tue, Nov 24, 2015 at 2:30 PM, Jeremy wrote: > >> Jackie to the rescue! Disaster averted. We are no longer accepting >> comments from the peanut gallery. Move along. Nothing to see here. >> On Nov 24, 2015 12:27 PM, "Josh Luthman" &

Re: [AFMUG] Powercode dead?? No answer

h Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Nov 24, 2015 at 2:01 PM, Jeremy wrote: > >> I wasn't jumping to (b). I was getting attention in order to get the >> issue resolvedand it worked.

Re: [AFMUG] Powercode dead?? No answer

2-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Tue, Nov 24, 2015 at 1:38 PM, Tushar Patel wrote: >>> >>>> Josh so are you on support staff of power code? >>>> >>>>

Re: [AFMUG] Powercode dead?? No answer

343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Nov 24, 2015 at 1:38 PM, Tushar Patel wrote: >> >>> Josh so are you on support staff of power code? >>> >>> Tushar >>> >>> >>> On Nov 24, 2015,

Re: [AFMUG] Powercode dead?? No answer

> Troy, OH 45373 >>> >>> On Tue, Nov 24, 2015 at 1:38 PM, Tushar Patel wrote: >>> >>>> Josh so are you on support staff of power code? >>>> >>>> Tushar >>>> >>>> >>>> On Nov 24, 2015, at 12:34 PM, Josh

[AFMUG] Powercode dead?? No answer

Anyone tried to call Powercode lately? Both sales and support immediately fail "call transfer failed - no answer" - of course I have an outage an need assistance. No option to transfer to after hours support...nothing. Just call transfer failed.

Re: [AFMUG] Looking for a Ticketing System

SugarCRM? I have no ideas about their pricing model. On Tue, Nov 24, 2015 at 8:55 AM, Josh Luthman wrote: > I think Dennis meant http://www.librenms.org/ > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Nov 24, 2015 at 10

Re: [AFMUG] do you guys install CPE's in the winter time?

We work in all weather. From -18 degrees to 4' of snowhere in Utah. We work rain or shine. However, it is up to the installer to determine if each install is safe or not, and he can reschedule if he isn't comfortable. Usually we work off of a ladder or we get on at the peak and 'scoot' along

Re: [AFMUG] is the nanobeam m5 400 and PBE-M5-500ac mounting hardware the same?

Yes, the 500s are the same, the 620s are the super heavy duty mounts. On Wed, Nov 18, 2015 at 3:10 PM, Mathew Howard wrote: > As far as I can remember, it is the same. > > On Wed, Nov 18, 2015 at 4:03 PM, Tim Reichhart < > timreichh...@hometowncable.net> wrote: > >> Guys >> I just wanted to know

Re: [AFMUG] Installer Issue With Helpers

On Tue, Nov 17, 2015 at 2:11 PM, Mathew Howard wrote: > If they're the type to follow you around, that's very likely to > backfire :P > > On Tue, Nov 17, 2015 at 2:35 PM, Jeremy wrote: > >> Start debating creationism with them. >> >> On Tue, Nov 17

Re: [AFMUG] Installer Issue With Helpers

Start debating creationism with them. On Tue, Nov 17, 2015 at 1:14 PM, Mathew Howard wrote: > Some of them will just follow you around no matter what you do... not a > lot you can do other than just deal with it. > > On Tue, Nov 17, 2015 at 2:10 PM, Sean Heskett wrote: > >> hand the customer pa

Re: [AFMUG] [WISPA] S'il vous plaît priez pour nos amis français

I'd definitely argue that. You *think* they are mostly sane until you come to Utah and attempt to order a 'double' Jack and Coke. On Mon, Nov 16, 2015 at 12:10 PM, Chuck McCown wrote: > Well, our evangelical, agnostic and atheistic friends would probably want > to argue the “mostly sane” part..

Re: [AFMUG] Ultra flexible CAT5 patch cable source?

Stranded, not solid. Right? On Mon, Nov 16, 2015 at 2:11 AM, Carl Peterson wrote: > > What you want is pur jacket cat5 or cat6. You can buy spools of it as > well for ~$4 per ft > > On Nov 16, 2015, at 3:40 AM, TJ Trout wrote: > > how about the flat ones? they pretty much fit what your asking

Re: [AFMUG] link problems

anobeam M2 install and swap them out because of service issues. On Sun, Nov 15, 2015 at 8:16 AM, Josh Luthman wrote: > Opposite here... > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Nov 15, 2015 10:16 AM,

Re: [AFMUG] link problems

I have not been impressed with the Nanobeam M2. I see way better performance to a M2 Nanostation and reflector. The TX rate always suffers (like the link you just put in). This is in contrast to a M5 400 where I see better performance than a M5 Nanostation and reflector. On Sun, Nov 15, 2015 at

Re: [AFMUG] Steer customers to ACH (vs CC)?

t; Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Wed, Nov 11, 2015 at 11:41 AM, Jeremy wrote: > >> I originally loved ACH, for the cost savings. Now I have realized that >> it is the only way that a customer can d

Re: [AFMUG] Steer customers to ACH (vs CC)?

I originally loved ACH, for the cost savings. Now I have realized that it is the only way that a customer can defraud us with our current billing method. They login and run an ACH on a delinquent account, get it turned back on automagically, and then it bounces, we add a fee, they repeat the proc

Re: [AFMUG] Franchise Agreements with the city

on the bill, blame the city, then raise holy hell with the city about other > companies operating there without a franchise. I have ran into this > multiple times. > > *From:* Jeremy > *Sent:* Tuesday, November 10, 2015 11:08 AM > *To:* af@afmug.com > *Subject:* [AFMUG] Franchis

[AFMUG] Franchise Agreements with the city

I found a law on the books that says any company selling telecommunication services within the city must have a franchise license with the city. None of my competitors have ever done this. I thought it must just be on the books from a time when all telecom was ran in the ROW, and therefore it wou

[AFMUG] UBNT stock

Up 15% today! It seems like investors found the EPS increase favorable. 2nd quarter earnings were up, and forward-looking statements are positive. Maybe it will keep climbing back to $55?? Someday

Re: [AFMUG] OT Craigslist

Molly and Lucy? Who sells Ecstasy and LSD on Craigslist??? That's some crazy stuff right there. On Wed, Nov 4, 2015 at 7:43 PM, Ken Hohhof wrote: > My advice to Chuck would be to separate the two things. Look for a house > cleaner, and look for a boarder. > > At least around here, lots of mom

Re: [AFMUG] AF2X, AF3X, AF5X SNMP

Works perfectly http://dl.ubnt.com/firmwares/airfiber5X/v3.0.2.1/UBNT-MIB.txt On Wed, Nov 4, 2015 at 11:44 AM, Eric Kuhnke wrote: > ubnt guys, what's the state of SNMP on these? If any serious progress has > been made in the last 3-4 months, can you paste a numeric snmpwalk of an > operational

Re: [AFMUG] Checking Comcast Availability on a Per Address Basis?

In my state Comcast claims they have 1Gbps speeds everywhere...even in the mountains. I complained to the local broadband development office when they wanted my map, and they said "it's difficult to make a detailed map of their exact network". I said "No doubt! I just made one!" I would argue t

Re: [AFMUG] OT: Testing APC units - probably a dumb question

Yes, they require batteries to even power on. Also, many of the larger APCs are 48v instead of 24v. Make sure to check the data sheet. On Mon, Nov 2, 2015 at 1:31 PM, Chuck McCown wrote: > Wonder what would happen if you put a big cap in place of the batt. > > *From:* Sterling Jacobson > *Sen

Re: [AFMUG] All units on a tower lost GPS sync

I've seen GPS antennas die before, seen water in a type-N conenctor, and have seen the sync source die (daughter board on a CMM3, or whatever on CMM4. There are a few points of failure that could cause that. On Mon, Nov 2, 2015 at 7:21 AM, Josh Luthman wrote: > What radios? What's giving them

Re: [AFMUG] OT: Best laptop for battery and price

I use a Lenovo X230 convertible. I love it, but not for $1,200. We use Nexus 7 or Samsung Galaxy Tab 4 tablets for installs. On Sat, Oct 31, 2015 at 2:45 PM, Josh Luthman wrote: > Buy them used. They're so much cheaper and a fantastic value. > > > Josh Luthman > Office: 937-552-2340 > Direct:

Re: [AFMUG] Weirdest network issue

This is going to be a setting in the ProCurves I would say. The AF should essentially be acting as a transparent bridge. On Fri, Oct 30, 2015 at 12:22 PM, Scott Vander Dussen wrote: > We replaced 3x Dragonwaves in LACP with a single AF 24HD, also updated > switches on both sides with newer HP P

Re: [AFMUG] Airfiber 24 HD

Hz than the > equivalent amount of rain. Even wet snow is relatively "dry" when it's in > the air until it hits surfaces and starts congealing. > > > > On Thu, Oct 29, 2015 at 6:33 PM, Jeremy wrote: > > Seriously though, how does that perform in wet, heavy sno

Re: [AFMUG] When you want 4.8 kbps at -115 signal or thereabouts

This technology seems like it would be perfect for SCADA stuff wouldn't it? We provide service to our local irrigation company and they have terrible connections, but only need a few kbps every few minutes so it still works great. They are just sensors that monitor water flow through canal system

Re: [AFMUG] 430APC-HV

Do you think that Cambium was like, "These techy types are so enthusiastic about proprietary formats like Apple and everything, we should follow suit and ignore all of the IEEE standards!??" Or was it "Maybe we can MAKE them buy our CMM!" Either way, I call it a POE failure. Glad that I never de

Re: [AFMUG] Airfiber 24 HD

Seriously though, how does that perform in wet, heavy snow at 3.5 miles? I can't imagine it would be good. I am in Utah too. Am I wrong for engineering all of my 24GHz links at less than one mile? On Thu, Oct 29, 2015 at 5:12 PM, Work wrote: > Dont know if @UBNT-Chuck wants to chime in here b

Re: [AFMUG] Towers near airports

planned one will be, >>> only looking for a 50ft mini pop to hit a few houses behind a hill. >>> >>> >>> >>> I'll check out the site. >>> >>> Thanks guys. >>> >>> >>> >>> >>> >>&g

Re: [AFMUG] Towers near airports

. On Wed, Oct 28, 2015 at 6:30 PM, Jeremy wrote: > Put it in to the towair website and see if it passes or fails. > > On Wed, Oct 28, 2015 at 6:22 PM, Glen Waldrop > wrote: > >> What is the legality of towers near airports? >> >> How high, how far does it need to be from the airport, etc? >> >> > >

Re: [AFMUG] Towers near airports

Put it in to the towair website and see if it passes or fails. On Wed, Oct 28, 2015 at 6:22 PM, Glen Waldrop wrote: > What is the legality of towers near airports? > > How high, how far does it need to be from the airport, etc? > >

Re: [AFMUG] New Speedtest.net server for us

Works for me, but my test was 43ms 2.5Mbps down x 20Mbps up. I get 6ms & 50x70 to UEN in SLC on this same WiFi. I'll have to try testing to you on a wired connection next time I have a chance. On Tue, Oct 27, 2015 at 8:31 PM, Sterling Jacobson wrote: > Ok, I think we got it fixed. > > http://a

Re: [AFMUG] Tile satellite mount

No option to skip it and go for a fascia mount? On Mon, Oct 26, 2015 at 10:21 AM, Rory Conaway wrote: > I’m looking for a roof mount that attaches to concrete tiles by clamping > against it. Any help would be appreciated. > > > > *Rory Conaway **• Triad Wireless •** CEO* > > *4226 S. 37th Stree

Re: [AFMUG] B11 copper v fiber

gt; <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > -- > *From: *"Jeremy" > *To: *af@afmug.com > *Sent: *Saturday, October 24, 2015 12:17:1

Re: [AFMUG] B11 copper v fiber

t; Unfortunately not everyone has gone to fiber yet so PoE is still needed > for some transitionally. > > Jaime > > On Oct 24, 2015, at 9:19 AM, Jeremy wrote: > > I do not see the direct DC connector on any of the marketing photos. Do > these still need to be powered via POE

Re: [AFMUG] B11 copper v fiber

I do not see the direct DC connector on any of the marketing photos. Do these still need to be powered via POE? On Wed, Oct 21, 2015 at 4:40 PM, Jaime Fink wrote: > Thanks Mike. > > Yes the aggregates Mike quoted are roughly correct as well, but…it’s a bit > different when you’re using our Auto

Re: [AFMUG] ISPs "reminded" to not use government money for alcohol and vacations

What do you think those 'massages' were?? On Thu, Oct 22, 2015 at 5:59 PM, Josh Luthman wrote: > Who says it isn't? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Oct 22, 2015 7:57 PM, "That One Guy /sarcasm" < > thatoneguyst...@

Re: [AFMUG] Serving customers next door to tower

;>> >>> Daniel White >>> >>> afmu...@gmail.com >>> >>> Cell: +1 (303) 746-3590 >>> >>> Skype: danieldwhite >>> Social: LinkedIn <http://www.linkedin.com/in/danielwhite84>: Twitter >>> <https://twitter.com/Danie

Re: [AFMUG] Serving customers next door to tower

On the ones that I cannot get good signal I use a bare loco on both sides, one pointed up and one pointed down, on a 5MHz channel. It will usually still get them 15Mbps, without sacrificing too much spectrum at the tower. On Thu, Oct 22, 2015 at 10:10 AM, Ken Hohhof wrote: > Do you have a cabin

Re: [AFMUG] Serving customers next door to tower

I usually throw up a bare loco and turn it all the way down to 4 or -4 or whatever. I don't know what you'd do for a EPMP (bare?) On Thu, Oct 22, 2015 at 10:06 AM, Josh Luthman wrote: > Same property, big concrete in the way. Fiber would be way cost > prohibitive (for their bandwidth needs).

Re: [AFMUG] anyone know where to get the 25" j-mounts UMXL that streakwave carries?

g > seems fine after a couple of years, but it has a dusty feel. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Oct 22, 2015 at 11:19 AM, Jeremy wrote: > >> Maybe they have impro

Re: [AFMUG] anyone know where to get the 25" j-mounts UMXL that streakwave carries?

-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Thu, Oct 22, 2015 at 11:15 AM, Jeremy wrote: > >> I have been happy with the long masts from Perfect10.tv, but I can >> absolutely tell you don't ever buy masts from Skywalker

Re: [AFMUG] Can Rocket AC5 talk to M5?

Well you have to upgrade your M gear to the latest beta...which has those rules as default doesn't it? I was wondering the same thing. On Thu, Oct 22, 2015 at 8:52 AM, Mathew Howard wrote: > I've only looked at airOS 6 a little, but the output power shouldn't > change on M gear unless you activ

Re: [AFMUG] anyone know where to get the 25" j-mounts UMXL that streakwave carries?

I have been happy with the long masts from Perfect10.tv, but I can absolutely tell you don't ever buy masts from Skywalker!!! On Wed, Oct 21, 2015 at 11:53 PM, Rory Conaway wrote: > They are out of stock and no ETA. Trying to find something equivalent > without going to the DS-3000. Those are

Re: [AFMUG] Installer Wages

We are a small shop, one installer, $17 per hour (40-hour week - gets time and a half almost every week). We buy all his tools, fuel, and supply a truck. No Insurance benefits at this time. Paid holidays - vacation probably after year one. On Wed, Oct 21, 2015 at 8:34 AM, Darin Steffl wrote: >

Re: [AFMUG] adjustable DIN for rack

How about this? http://www.ebay.com/itm/Cisco-2955-Series-19-Catalyst-Rack-Mount-Kit-/311459329821?hash=item48846c371d:g:WtUAAOSwFnFWEueU On Tue, Oct 20, 2015 at 6:23 PM, Roland Houin wrote: > we use a 2 u wall rack bracket (about 20.00). > mount backwards on rack, works well & cheap. > > roland

Re: [AFMUG] Take down notices/Copyright infringement notices..

I forward every one. I have found that these people usually freak out and never do it againwhich frees up more bandwidth. I actually love catching these guys and forwarding the letters. Their usage drops dramatically after they get one. On Wed, Oct 14, 2015 at 9:05 PM, Steve Discher wrote:

Re: [AFMUG] Interesting antenna from UBNT

They had one at WISPAPALOOZA. It is like 4 1/2' tall by 1' wide. A beast of a sector. 2015-10-15 11:53 GMT-06:00 Peter Kranz : > https://www.ubnt.com/downloads/datasheets/RocketAC/Rocket_ac_Prism_DS.pdf > > > > > *Peter Kranz*www.UnwiredLtd.com > Desk: 510-868-1614

Re: [AFMUG] Best way to mount 2 1/2 emt pipe

We always called those 'hit pins'. I like them, but it sucks that you can never get them out without drilling them out. I prefer to set expanding anchors and then bolt to them. That way you can always remove the nut if needed. On Mon, Oct 12, 2015 at 10:47 AM, Lewis Bergman wrote: > I am real

Re: [AFMUG] OT Guns etc

No, I drive jacked up gas guzzling pickup trucks. On Sun, Oct 11, 2015 at 7:14 PM, CBB - Jay Fuller wrote: > > i don't know...do you use uber? > > - Original Message - > *From:* Jeremy > *To:* af@afmug.com > *Sent:* Sunday, October 11, 2015 7:41 PM > *Subj

Re: [AFMUG] OT Guns etc

Wait...I am a far left liberal in red state Utah, but I completely agree with the Republicans and Constitutionalists when it comes to guns and gun rights. So am I still a Libtard or just a Utard?? On Sun, Oct 11, 2015 at 6:12 PM, CBB - Jay Fuller wrote: > > Positive Points: > > * requiring cove

Re: [AFMUG] OT Campus Shootings

I agree, we should be able to own an Abrams M1 Tank! No better way to keep a power hungry government in check, than to arm it's citizens with tanks. I stand fully behind the 2nd amendment and my right to own the same weapons as my government. On Sat, Oct 10, 2015 at 8:49 AM, David Milholen wrote

Re: [AFMUG] Netflix bandwidth

To watch 'free' Hulu on TV you have to use PlayOn from a home server to transcode it. Hulu Plus is the only one that allows TV viewing, and has higher resolutions, more episodes (like a full season), and the pay version actually has less TV shows (as the licensing doesn't allow certain shows on a

Re: [AFMUG] New to VoIP

th me still taking all the calls it definitely seems like a headache that I don't want. On Thu, Oct 8, 2015 at 2:08 PM, Jay Weekley wrote: > It's more stuff to troubleshoot definitely. Jeremy, are your VOIP > customers residential or commercial? > > Jeremy wrote: > >

Re: [AFMUG] New to VoIP

We make a small amount of money, with fairly decent margins, but hardly enough to be worth the additional tax burden and ridiculous amounts of regulatory red tape. I wonder why??? continuously. On Thu, Oct 8, 2015 at 1:04 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > The only a

Re: [AFMUG] FAA levies $1.9 M civil penalty

I think you are on to something there Chuck! Interactive drone shooting. It would definitely be a hit here in Utah... On Wed, Oct 7, 2015 at 5:56 PM, Ken Hohhof wrote: > I see the hawk-vs-drone and kangaroo-vs-drone videos on Youtube, and think > you just need a trained hawk. Or kangaroo. I d

Re: [AFMUG] Bandwidth Overages

300GB per month, .50 cents per GB thereafter On Wed, Oct 7, 2015 at 6:03 PM, Matt wrote: > For those doing bandwidth quotas what and how are you charging for > overages? >

Re: [AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade

I would not expect -86 and -89 to stay connected, on any firmware. On Wed, Oct 7, 2015 at 2:01 PM, Justin Marshall wrote: > Sorry, > > > > That should have read: > > This AP originally had 6 SM’s connected at *5690* > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Justin Marshall

Re: [AFMUG] Shielded keystone jacks

Does anyone here have any experience with the punchdown / quick termination tools for keystone jacks? Like this: http://www.primuscable.com/store/p/9736-Punch-Down-Tool-Rapid-Termination-Tool-for-MIG-180-Keystone-Jacks.aspx On Tue, Oct 6, 2015 at 12:59 PM, Jeremy wrote: > Yes, we do

Re: [AFMUG] Shielded keystone jacks

we go with this method, and it works, looks clean, and saves equipment. On Tue, Oct 6, 2015 at 12:18 PM, Daniel White wrote: > Jeremy, > > > > I’m lost. Why do you use shielded keystone jacks on every install? > > > > Use a surge suppressor on the outside of

Re: [AFMUG] Shielded keystone jacks

Ok, it looks like the Hyperline are available for about $3.80 ea. if you buy 1K. The other ones are .10 - $1 each from Taiwan, but it is hard for me to trust my credit card to most of the cheesy looking websites that I cannot translate. On Tue, Oct 6, 2015 at 9:55 AM, Jeremy wrote: > Nope,

Re: [AFMUG] Shielded keystone jacks

;> *Subject:* Re: [AFMUG] Shielded keystone jacks >> >> If it's outside what I do is RJ45-ECS (they changed to shielded a while >> back, same part number) and that goes to a WB SS. >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 9

Re: [AFMUG] Shielded keystone jacks

>> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Oct 6, 2015 at 11:04 AM, Jeremy wrote: >> >>> I prefer Union Special Tech keystone jacks,

[AFMUG] Shielded keystone jacks

I prefer Union Special Tech keystone jacks, but holy crap they are hard to find in the US! For their shielded jacks, they have a little lock ring that locks the cable down tight (strain relief), and provides an awesome ground. That strain relief looks like this http://www.netkey.ru/content/img/wm

Re: [AFMUG] National Broadband Map

g system export to the FCC, that is. > > > > > - > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > -- > *From: *"Jeremy" > *To: *af@afmug.com > *Sent: *Friday, October 2, 2015 5:08:44 PM > *S

Re: [AFMUG] National Broadband Map

st > > www.wirelessmapping.com > > www.Broadband-Mapping.com > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jeremy > *Sent:* Friday, October 02, 2015 10:14 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] National Broadband Map > >

Re: [AFMUG] New hold music for the customer facing asterisk IVR

Blanket licensing for radio stations: http://entertainment.howstuffworks.com/music-licensing3.htm On Fri, Oct 2, 2015 at 10:25 AM, Adam Moffett wrote: > Case in point, which might even be back on the original topic, Is Rick > Astley damaged by "Rick Roll" videos? > He was out of the public eye f

Re: [AFMUG] New hold music for the customer facing asterisk IVR

Actually, radio stations do pay for non-exclusive rights to broadcast the songs that they play. They have their own licensing model similar to many other types of broadcasts. On Fri, Oct 2, 2015 at 10:15 AM, Adam Moffett wrote: > How am I harmed if someone is creating and selling stinger antenn

Re: [AFMUG] National Broadband Map

Our state (Utah) has allocated funds and is continuing the Utah Broadband Mapping Initiative (brodband.utah.gov/map/). They called me recently for a map update. I mentioned that it is all on the 477 map now and she said they were continuing to update the local map independently of the 477 map. O

Re: [AFMUG] DC power for AF5x

I am using power on all four pair with them, and it is working great. I haven't tried without. On Tue, Sep 29, 2015 at 12:55 PM, Mathew Howard wrote: > Standard two pair works fine on AF5x, supposedly they need all four if > it's a long cable run, but I've run them on as much as 100' of cable w

Re: [AFMUG] DC power for AF5x

at at gigbit? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Sep 29, 2015 at 2:46 PM, Jeremy wrote: > >> I use GIGE-APC-POE to power them currently. I have a couple Netonix, but >

<    1   2   3   4   5   6   7   8   9   10   >