hi,
I've set in gnucash config fonts for the ledger but there seems to be no way,
to set the
font for the reports ? grepping into /usr/share/gnucash and /home dir found
nothing
about 'Helvetica'...
any idea wher this can be ?!
** WARNING **: file gnome-font-face.c: line 574: Face Helvetica: C
#gnucash
Gtk-WARNING **: Unable to locate loadable module in module_path:
"libthinice.so",
Gtk-WARNING **: Unable to locate loadable module in module_path: "libpixmap.so",
Gtk-WARNING **: Unable to locate loadable module in module_path: "libpixmap.so",
Gtk-WARNING **: Unable to locate loadable
where to put something so that it start after X/Gnome is started...
I just upgraded to xorg-x11 maan that is coool :")..
http://gentoo-wiki.com/TIP_Xorg_X11_and_Transparency/
tia
--
gentoo-user@gentoo.org mailing list
the problem is that even restart didnt help
growisofs
---
/dev/ide/host0/bus1/target0/lun0/cd: pre-formatting blank DVD+RW...
:-( unable to FORMAT UNIT (Fh/FFh/FFh): Operation not permitted
# ll /dev/ide/host0/bus1/target0/lun0/cd
brw-rw-rw-1 blah cdrw 22, 0 Jan
Hi,
i have problems writing the dvd writer... i remember to have similar problems
when I brought CDRW.. with all mungling with devfs also remember that the
problem happen to be /etc/security/console.perms
Now I'm tring to make the similar correction i.e. :
=/dev/scd* /dev/sg* /dev/pcd* /dev/pg*
hi,
how do u do automounting in 2.6.10 in 2.6.5 supermount was working,
now on boot I get message that kernel does not have support for supermount.
I enabled two things in FS abount automounting..checking..
yeah ... Kernel automounter support version 4..
what I have to do to enable it ?!
>From
hi,
a tool for quck backup/restore of gentoo installation ?
Or better is to use standard tools dar/tar/cp !!?
bye for now...
--
gentoo-user@gentoo.org mailing list
i have ~20 entires... and have to type alot until i get to the correct spot...
probably I should move these entires in the front..so that i can add specific
masks only for them
|[EMAIL PROTECTED] wrote:
|> hi,
|>
|> in /etc/conf.d/net I have in alias_eth0 :
|> around ~20 aliases
|>
|> alias_et
hmm.. that something new.. where i can see description
of this new syntax ?!!
|[EMAIL PROTECTED] ha scritto:
|
|>hi,
|>
|>in /etc/conf.d/net I have in alias_eth0 :
|>around ~20 aliases
|>
|>alias_eth0="x.x.x.x .. y.y.72.0 y.y.73.0 y.y.74.0 x.x.x.x"
|>
|>it creates these interfaces with n
emerge iproute2 -pv
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild NS ] sys-kernel/linux-headers-2.4.21-r1 -build 27,864 kB
[ebuild UD] sys-apps/iproute2-2.6.9.20041019-r1 [20010824-r4] -atm -minimal
268 kB
I'm with 2.6.10 kernel
--
gent
hi,
I have sysKonnect 1gb card integrated on the mobo after working several hours I
start to get
slowdowns.. no errors in ifconfig, no reconfiguration of 1g... nothing seems
wrong,
but the ping to this machine becomes from 8 ms to 200ms..
I can feel the lag, download speed can become more than ~
Does this sound like a HDD going to die ?
Buffer I/O error on device sdb1, logical block 29305196
Buffer I/O error on device sdb1, logical block 29305196
Buffer I/O error on device sdb1, logical block 29305196
Buffer I/O error on device sdb1, logical block 29305196
Buffer I/O error on device sdb1,
solved..
USE=-ipv6 emerge mod_perl
resolved the problem
|any idea why I cant compile mod_perl
|
|
|
|gcc -fPIC -O3 -march=i686 -funroll-loops -pipe
-I/usr/lib/perl5/5.8.6/i686-linux/CORE -fno-strict-aliasing -pipe
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DMOD_PERL_VERSION=\"1.27\"
-DMOD_P
I see that my /var/tmp/portage is about 500 MB, can I erase its contents or
there
is something that is important there ?
tia
--
gentoo-user@gentoo.org mailing list
any idea why I cant compile mod_perl
gcc -fPIC -O3 -march=i686 -funroll-loops -pipe
-I/usr/lib/perl5/5.8.6/i686-linux/CORE -fno-strict-aliasing -pipe
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DMOD_PERL_VERSION=\"1.27\"
-DMOD_PERL_STRING_VERSION=\"mod_perl/1.27\" -I/usr/include/apache -DMOD_
hi,
can apache 1.3 and 2.0 coexist on the same machine ?
if yes is it nececeary something else to be done, configured ?
what about mod_perl1 & mod_perl2 ?
what about apreq1 & apreq2 ?
tia
--
gentoo-user@gentoo.org mailing list
I see that libapreq2 is hardmasked, does anyone have tried it ?!
Can I broke something else if i emerge it ?
tia
--
gentoo-user@gentoo.org mailing list
On Wed, 19 Jan 2005 17:09:40 +0100
"Damiano Bianchi" <[EMAIL PROTECTED]> wrote:
|
|Hi,
|
|Have you set the duplex on both cisco switch and pc
|(instead of autosense)?
|How many interfaces on your system?
]- one interface.
How to set duplex on my linux box ?
|--
|Damiano
|
|
|On Wed, 19 Jan 2005
Any idea how can I select [TCP retransimision] packets with tcpdump (pcap) ?
I mean exapmple of exression that will match them ..
I can use "tethereal | grep Retr" but I want to use it in context of the iftop
-f ' filter...'
tia
--
gentoo-user@gentoo.org mailing list
In an .ebuild I'm tring to execute localdef for generating
cd ${D}/usr/share/i18n/locales
/usr/bin/localedef -f ../charmaps/CP1251 -i bg_BG bg_BG
But i get access denied :
ACCESS DENIED open_wr: /usr/lib/locale/locale-archive
cannot open locale archive "/usr/lib/locale/locale-archi
u mean over my existing distribution... i.e. owerwrite !?
isnt there danger to break something ?!
|On Thu, 2004-02-26 at 01:21, raptor wrote:
|> hi,
|>
|> I want to reinstall my gentoo, the problem is that i want to reistall it as I work
on my current gentoo w/o
|> re
hi,
I want to reinstall my gentoo, the problem is that i want to reistall it as I work on
my current gentoo w/o
repartitioning...
Can I install gentoo on a directory under root...i.e.
chroot /mynewgentoo /bin/bash
then install as usual...what I should set in GRUB..
What about of the possibil
On Fri, 13 Feb 2004 20:06:04 +
Daniel Drake <[EMAIL PROTECTED]> wrote:
|Hi,
|
|raptor wrote:
|> ~emerge alsa-driver
|>
|>
|> driver-1.0.2c
|> checking cross compile...
|> checking for directory with kernel source... /usr/src/linux
|> checking for kernel
~emerge alsa-driver
driver-1.0.2c
checking cross compile...
checking for directory with kernel source... /usr/src/linux
checking for kernel version... 2.4.20-gentoo-r7
checking for GCC version... Kernel compiler: colortail: invalid option -- ? Try
'colortail --help' for more information. Used
did u tried this :
emerge -p info
try it
--
[EMAIL PROTECTED] mailing list
yes :
#ls /var/lib/postgresql/data/
base global pg_clog pg_hba.conf pg_ident.conf PG_VERSION pg_xlog postgresql.conf
|raptor wrote:
|
|>as shown after emerging and config I started postgresql :
|>
|> /etc/init.d/postgresql start
|> * Starting postgres...
|> * Please see
as shown after emerging and config I started postgresql :
/etc/init.d/postgresql start
* Starting postgres...
* Please see log file: /var/lib/postgresql/data/postgresql.log
it doesnt start and there is no such log generated ?! even after i done updatedb,
locate cant find such file..
what c
I've just recompiled w/o APIC support now will wait to see if it will crash again...
The previous crashes happened on pure-ftpd (not sure, it just mention this process
name
it is most probably kernel problem. I just recompilted the pure-ftpd for any case.)
The kernel is 2.4.22-r5. chipset - Inte
so on...
|raptor wrote:
|
|>|> Is there a way to test crontab... what i mean is to run a script in the same way
the crond did it, so I can check if there is some
|>|> problems, permissions wrong etc...
|>|> Otherwie I have to wait until crond trigger the action and still have t
hmmm :"), it is my first 1GB machine ... have another one.. today, hove to recompile
there too...
thanx
--
[EMAIL PROTECTED] mailing list
why kernel is saying that it will use only 896 MB RAM, when I have 1GB ?!?! (see below)
one more question the machine crashes from time to time !???! only thing different
from other machines i had is
that I have Gsecurity at medium ?
Is there a place where info is saved after crash so that i can l
|> Is there a way to test crontab... what i mean is to run a script in the same way
the crond did it, so I can check if there is some
|> problems, permissions wrong etc...
|> Otherwie I have to wait until crond trigger the action and still have to guess
what is really happening by the external
hi,
Is there a way to test crontab... what i mean is to run a script in the same way the
crond did it, so I can check if there is some
problems, permissions wrong etc...
Otherwie I have to wait until crond trigger the action and still have to guess what
is really happening by the external scrip
1.ssh to remote box...
2. decide partition layout (better install on new parttion, but think it will be
possible to do
this on any directory on currently running distro, just the boot process should be
little differnet.
Does anyone tried this !?)
3. follow the normal instrunction for installatio
is there a easy way to grep rotated logs... when they are gziped...
I mean a quick way.. i.e. ready console tool..
thanx
--
[EMAIL PROTECTED] mailing list
from the time i done sa-learn ham&spam
I get all the spam into my inbox, one on every ~50 goes to spam folder..
i have deleted ~/.spamassasin dir... and done sa-learn again..
but nope
|emerge Mail-SpamAssassin
|
|Read
|
|http://support.ximian.com/cgi-bin/ximian.cfg/php/enduser/std_adp.php?p
emerge automake
Calculating dependencies ...done!
>>> emerge (1 of 1) sys-devel/automake-1.7.7 to /
!!! YOU HAVE A BROKEN PYTHON/GLIBC.
!!! You are most likely on a pentium4 box and have specified -march=pentium4
!!! or -fpmath=sse2. GCC was generating invalid sse2 instructions in versions
!!! pri
i'm already having these messages on several boxes
how to ged rid of them... deleting /var/db/...devfs doesnt help..
>>> Regenerating /etc/ld.so.cache...
* Caching service dependencies... [ ok ]
>>> Auto-cleaning packages ...
!!! Invalid db entry: /var/db/pkg/*sys-fs/devfsd
!!!
hmm. i had to update the portage...
now is ok..
--
[EMAIL PROTECTED] mailing list
e sync-ed befor 30 min
this is installation of a new system from stage3 !!
|have you deleted the file in question by accident? It looks as if
|though it was expecting a file and it wasn't there...
|
|On Thu, 29 Jan 2004 14:19:41 +0200
|raptor <[EMAIL PROTECTED]> wrote:
|
|> #
# emerge -f system
Calculating system dependencies ...done!
>>> emerge (1 of 50) sys-apps/gawk-3.1.3-r1 to /
>>> emerge (2 of 50) sys-apps/util-linux-2.11z-r8 to /
>>> emerge (3 of 50) sys-apps/baselayout-1.8.6.10-r1 to /
>>> emerge (4 of 50) sys-devel/gnuconfig-20030708 to /
>>> emerge (5 of 50)
thanx that worked ... Now if there is a way to send these terminals automaticly on
DESKTOP2/WORKPLACE2 :")
(GNOME)
|gnome-terminal --command="cmd-1" --tab-with-profile=default --command="cmd-2"
|
|works for me...
|
|Matt Wilson wrote:
|
|> On Mon, 2004-
gnome-terminal -e 'ssh machine1' && gnome-terminal --tab -e 'ssh machine1'
this doesnt work either !!:"(
|hi,
|
|How can I start gnome-terminal with several commands which open in several tabs...
|curently I can do :
|
|gnome-terminal -e 'ssh machine'
|
|but this open just one window... I want to
hi,
How can I start gnome-terminal with several commands which open in several tabs...
curently I can do :
gnome-terminal -e 'ssh machine'
but this open just one window... I want to be able to say something like this :
gnome-terminal -e 'ssh machine' -e 'ssh machine2' -e 'ssh machine3'
and onl
ly.. (the only thing i done before week was upgrade to gnome2.4)
|raptor wrote:
|
|> why eject works only under root..
|
|it's absolutely OK !!!
|let's have a look to file permissions !
--
[EMAIL PROTECTED] mailing list
hi,
why eject works only under root..
If I run it under other account I get this :
#eject -v
eject: using default device `cdrom'
eject: device name is `cdrom'
eject: expanded name is `/dev/cdrom'
eject: `/dev/cdrom' is a link to `/dev/scsi/host0/bus0/target0/lun0/cd'
eject: `/dev/scsi/host0/bus0/
oopsi forgot, why I want this.. if I have to run /etc under subversion control I have
to first
import it into repository, then move /etc, and then checkout... u know what mess
happens if
permission changes ?
Is there some way to preserve the dir but just add svn/cvs metadata(i.e. dir)..
So I don
Does subversion preserve the file permissions 'cause cvs doesn't and it will need
alot of additional work
to use it really transparently.. tia
|>
|I'v been reading about subversion, it seems like it could be a good starting point,
for what you describe.
|*
|http://subversion.tigris.org/
|
subversion stops on sys-libs/db-4.1.25_p1-r3 ...
HOW to solve this !? tia
#emerge subversion
...
checking for javac... no
checking for gcj... gcj -C
checking if gcj -C works... yes
checking for jar... no
configure: error: no acceptable jar program found in $PATH
!!! ERROR: sys-libs/db-4.1.25_p1-
hi,
is there a project for a cvs like system... what I think is something like, having
simulaneously different
states/profiles of my system..
say I boot in my system version A, install packge X,Y,Z.. when I log in my ver B I don
have them..
but on the other hand they start of a common system an
is there a tool similar to hdparm for scsi-over-ide..( extender card..)
so that i can see and set DMA or such things..
'cause I get sloopy performance when copyng from one disk to another..
the machine freezes
tia.
--
[EMAIL PROTECTED] mailing list
hi how to exclude all x and gtk stuff when compiling mplayer, tried this :
but x-stuff are still there.. i need mplayer for just running :
mplayer -identity -frame 0 movie.avi
nothing else... so that I can parse the result ..
It runs on server so i DONT want even to try to start the movie..
outp
Gentoo on PDA Zaurus
http://linuxtoday.com/infrastructure/2004012100126OSEMSW
--
[EMAIL PROTECTED] mailing list
Why I get these errors !!?
# emerge -p gentoolkit
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild R ] app-portage/gentoolkit-0.1.38
# emerge -p esearch
These are the packages that I would merge, in order:
Calculating dependencies ...done!
oopsi 2GHz :"))
|2Mhz
--
[EMAIL PROTECTED] mailing list
|raptor:
|
|If you want a (stupid) workaround for the moment so you can play while
|we debug, try the output of
| grep "cpu family" /proc/cpuinfo
|and paste the number in place of $CPU_VERSION, the test should pass.
|
|Anyway, can you send the output ?
|
|my less than two
when I start the cstrike server I get this into into the logs :
/opt/halflife/hlds_run: line 212: test: -lt: unary operator expected
/opt/halflife/hlds_run: line 220: test: -ge: unary operator expected
Using default binary.
here is line 212 :
CPU_VERSION="`grep "cpu family" /proc
hi,
say I run command like this :
screen -d command
I want to intercept the output and pass it to script written by me..
which will process the output...
In the same time I want to continue to be able to do
screen -r
does someone made something like this...any advice...
tia
--
[EMAIL PROTEC
no I dont need browser but to start in such way another program..
|If all you want is a browser in kiosk mode than I do believe
|MozillaFirebird has an extension to do this.
|Not sure about all the boot stuff or for other programs..
|Mick.
|
|
|--
|[EMAIL PROTECTED] mailing list
|
|
--
[EMAIL PRO
hi,
Could someone point me to a place where I can read how to make my Linux work in kiosk
mode..
what I mean, I want one program to take over the screen and nothing else be available
to the user
(i dont need it to be secure just impposible to be closed with the normal keys..etc.)
Also I want to
thanx, will check these...
The motherboard is not that good.. and yes in the past I had set =pentium4 but in fact
my Celeron has to be =pentium3..
But I rebuild the whole system.. so this has to be non-issue.. 'cause it worked long
time w/o problems..
These compiling problems began probably month
What "F" mean when doing "emerge -p"
# emerge -v -p halflife-server
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild N F ] games-server/halflife-server-3.1.1.0 -dedicated
--
[EMAIL PROTECTED] mailing list
yep that is interesting when I do "New pannel" nothing happens
(no sub menu there as I have on other machine with 2.2)
|On Mon, 2004-01-12 at 23:49, raptor wrote:
|> Everything is ok.. only that I cannot create panels !!
|
|You should be able to right click on a panel and s
hi,
I have strange problems... when emerging stuff sometimes they succeed,
somtimes not, sometimes I get segfaults as below :
#emerge glib
.
> /usr/lib/glib-2.0/include/glibconfig.h
>>> /usr/lib/libglib-2.0.so.0.200.3
>>> /usr/lib/libgmodule-2.0.la
>>> /usr/lib/libgthread-2.0.so.0.200.3
>>> /u
i just upgraded to gnome 2.4.
Everything is ok.. only that I cannot create panels !! and my second-panel that
disappeared..
any idea how to resotore it and be able to make new panels ..
tia
--
[EMAIL PROTECTED] mailing list
Is there a graphic installer for gtk1.4 themes i want to make my old apps look
better
(Galeon f.e.)
In fact I was testing Mozilla to switch from Galeon... 'cause Galeon continues to be
very buggy both gtk1.4 and gtk2.0 version...
The only reason I'm not still switching is that I dont have au
it seems that bash completion does not work if there is some text before emerge ..
like this :
ACCEPT_KEYWORDS='~x86' emerge -p ne
also when it works it appends one space after the text...!!
--
[EMAIL PROTECTED] mailing list
hi,
Is there a way to run enable some user to run remotely via ssh some commands, but
forbid him shell access at all..
I mean I want to eneble him only :
ssh [EMAIL PROTECTED] cmd1
ssh [EMAIL PROTECTED] cmd2
ssh [EMAIL PROTECTED] cmd3
i may enable sudo, but sudo is active after I give the us
go to virtuals file and remove pfiefer-kelnel from the kernel line...
i had similar problem with ck-sources and alsa...
i mean this file :
/var/cache/edb/virtuals
|hi list,
|
|can anyone please tell me why alsa-driver depends on pfeifer-sources?
|
|emerge -p alsa-driver
|
|These are the packages t
i'm having similar when running Galeon it is a child process..
stoping and strting galeon clean it up, but later it shows again :")
|Gentoo boxes is a process listed in 'top' as
|
|netstat
|
|I presume I can just kill it? (What is a 'defunct' process anyway?)
|
|Any idea what might cause th
hi,
i'm tring to make iperf ebuild
http://dast.nlanr.net/Projects/Iperf/iperfdocs_1.7.0.html
but i'm getting errors... below is the .ebuild and the error i'm getting.
---ebuild---
DESCRIPTION="measure maximum TCP bandwidth, delay jitter, datagram los
My alsamixer has the following :
master, master m, pcm, surround, center, LFE, Line, CD, Micm Mic boost, ,mic select,
video, phone, IEC958, IEC958 playback, pc speaker, aux, monu out, capture, mix,
Mix mono, external
Every place where I can set the bars I move them to the top.. i.e 100%.
I've lo
no there is no such thing :"(
> You might check your mixer app (try alsamixer or alsamixergui) and see if
> there are settings there to control it.
>
> > I have sound card - realtek ALC655 (working well with intel8x0 drivers).
> > The problem is that it I dont know how to activate Mic-in and L
he he... that was cool, try this one :
emerge -f -p --nodeps alsa-driver
> emerge --nodeps alsa-driver
>
> On Sun, 2003-12-14 at 01:04, raptor wrote:
> > why I get this, when I already deinstalled ck-surces and i'm now with gentoo
> > default kernel...
&
why I get this, when I already deinstalled ck-surces and i'm now with gentoo default
kernel...
#ll /usr/src/linux
lrwxrwxrwx1 root root 31 09-20 18:25 /usr/src/linux ->
/usr/src/linux-2.4.20-gentoo-r7
emerge -p alsa
hi
I have sound card - realtek ALC655 (working well with intel8x0 drivers).
The problem is that it I dont know how to activate Mic-in and Line-In to work as
outputs !?
Under windows there is app that senses if u connect speakers to them and activates them
as outputs...
So I can't play 5+1 AC3 s
Here is the output of atsar.ebuild
=merge==
...
hmod 755
/var/tmp/portage/atsar-1.6-r1/work/atsar_linux-1.6/image/usr/local/bin/atsahttp
cp atsar_linux.init
/var/tmp/portage/atsar-1.6-r1/work/atsar_linux-1.6/image/etc/rc.d/in
hi,
I'm tring to make atsar.ebuild but as u see below there is alot of direct dir/file
accesses,
do u have some solution so that I can correct it in one well swoop.
Is there a standard gentoo way to modify Makefiles on the fly ?!
==Makefile excerpt=
instal
Could someone check this too, I have tried to dload it from two different mirrors , no
success...
And a recipie to solve it ofcource (tried to regenerate digests manualy :( )
ACCEPT_KEYWORDS='~x86' emerge acidrip
Calculating dependencies ...done!
>>> emerge (1 of 9) dev-util/glade-2.0.1 to /
anyone to have an idea how can I print with QMS-815MR printer ?!
I made some tests/tries with Knoppix w/o success even with more
generic printers w/o success. !?
tring to print directly to lp0 doesn't do it either !!
QMS is now owned by minolta, no answer from them too..
tia
--
[EMAIL PROTECTED
I'm still with python 2.2
emerge -p python
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild U ] dev-lang/python-2.2.3-r5 [2.2.2]
On Fri, 05 Dec 2003 09:35:54 +
David Gethings <[EMAIL PROTECTED]> wrote:
|On Fri, 2003-12-05 at 09
Very strange even that I'm root see below the snippet , can someone explain me this..
So I
mv /usr/share/doc /usr/share/doc2
then moved all readable files back to doc..
but all these undeletable directories stays in doc2, any idea
how can I delete them and how in first place such thing can happen.
this simple script works :
import os
os.mkdir('/usr/share/doc/gnome-terminal-2.4.1')
the question is why I get error in portage.py but not in this script ?!
--
[EMAIL PROTECTED] mailing list
someone to know a tool for converting
.bin/.cue to .iso images ?!
w/o using CD's just generating one file from the other ...
tia
--
[EMAIL PROTECTED] mailing list
i can't emerge anything... do u have idea how to solve this, any
clue whatever :
below are some examples !!
---> emerge portage
>>> Auto-cleaning packages ...
!!! Invalid db entry: /var/db/pkg/*sys-fs/devfsd!!! Invalid db entry:
/var/db/pkg/*sys-fs/devfsd!!! Invalid db entry: /var/db/pkg/
less there is pkg_info sub..Ex.
INFO="u have to do this and that to configure the packge"
.
sub pkg_info() {
#if i specify this sub() then default behaviour of
#just displaying the INFO variable is overrided
}
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
&
Hi is there a way to pass options or so to the .ebuild, like this :
emerge pkg -option
and then access this -option in some way into the .ebuild script ?!
tia
--
[EMAIL PROTECTED] mailing list
thanx,
i solved the problem..
I had to set ./configure --install-dir ${D}usr
> tring to make an .ebuild for tcng but in the "make install" stage I'm getting errors
> i.e. tcng install script tries to write
> outside the sandbox..
> This is the problematic part of the Makefile :
> ---
tring to make an .ebuild for tcng but in the "make install" stage I'm getting errors
i.e. tcng install script tries to write
outside the sandbox..
This is the problematic part of the Makefile :
-
install-tcc:tcc check-install-dir scripts/localize.sh
hi,
Someone to know a colored ChangeLog viewer ? which packge?
tia
--
[EMAIL PROTECTED] mailing list
> What's wrong with crontab ?
nothing wrong ! it is slow if u just want to add something fast and the syntax is a
little cumbrestone...
And u have to be root to do it, and i dont want to run command every day but just
once..etc.. :")
--
[EMAIL PROTECTED] mailing list
someone to know console command so that I can run "wget" processes at specified time
... I need something easy..f.e.
runat -t 02:00 wget -c ..
i mean not putting stuff in crontab
--
[EMAIL PROTECTED] mailing list
U can look also at Sylpheed-claws (or sylpheed ofcource) if u dont bother that it is
GTK app, but not Qt.
It is lightweight and very functional and fast
Especialy if u are subscribed to many lists... top sylpheed features are :
- Ctrl+T i.e. Thread view
- and the fast filter (ala evolution)
Why I still get this, when I have recompiled python with -mno-sse2 !!!
==
# emerge halflife-adminmod
Calculating dependencies ...done!
>>> emerge (1 of 2) games-server/halflife-adminmod-2.50.56a to /
!!! YOU HAVE A BROKEN PYTHON/GLIBC.
!!! You are most likely on a pentium4 box and
is there some way to easy find and update security updates i.e. something in the lines
of this would be good :
emerge -p security-updates
this will list packges to be updated.. then if I want I can update
the packges i want to update..
probably this can be achieved with DEPEND="..."
tia
--
how to set the clock ...
I set the correct time into the BIOS, also with hwclock and delete /etc/adjtime ...
but my Gnome clock still shows 18:00 o'clock but it is 15:30 o'clock...
Even if i correct the time after restart the same happens... !!!
where is the problem ?
tia
--
[EMAIL PROTECTED] m
hi,
Is there a way to enable the metalog to log syslogs messages from remote machine ?!
tia..
--
[EMAIL PROTECTED] mailing list
hello,
I have Gigabyte GA-8IPE1000 (Intel 865PE Chipset) motherboard, the problem is that
i can't use DMA on HDD's..
I tried to compile support for Intel PXII but at the moment i set DMA=on i start to
get errors..
(hdparm -d1 /dev/hda)
Could someone point is there support for this chipset, I'm
thanx I see the crontab entry and also in the docs was mentioned
to update every 30 min... is this really nececary/required or I can set it
every 3 days, which is ok for me ...
00,30 * * * * root/opt/gentoo-rsync/rsync-gentoo-portage.sh
Also can I set the SYNC variable into make.conf to
machine ?!
or "emerge sync" do other stuff too..!?
tia
raptor
--
[EMAIL PROTECTED] mailing list
1 - 100 of 171 matches
Mail list logo