I have set up an two wisp-dists ... one as AP and one As Client ( managed mode ).
I double checked all the routes and subnets
the AP shows active association of the client.
The client shows association to the AP
I run tcpdump -i netcs0 and can see the AP is hearing the client but the client is
HI people,
I have a Dachstein router with EchoWall and SSH on it.
I try connecting to a FTP server and get this message:
error message: 501 you are on a LAN and the IP-NAT is not translating your
IP address correctly
I didn't have this problem before with this server, so i assume they changed
John van Oppen wrote about AW: [leaf-user] Cisco Aironet PCI cards and wisp-dist:
I am using build 2290. I did not see anything on the URL below except a link to
the main leaf site. Where would I obtain a development version?
Sorry, I didn't type the link fully -
Support Requests item #606429, was opened at 2002-09-08 20:16
You can respond by visiting:
https://sourceforge.net/tracker/?func=detailatid=213751aid=606429group_id=13751
Category: Release/Branch: Bering
Group: None
Status: Open
Priority: 5
Submitted By: Tom Harr Jakobsen (harjakob)
Assigned
Hi people,
I talked with the admin of the ftp site.
and he told me that port 864 is needed for IP NAT.
Can I just open port 864?
I have DachStein Echowall, how do I open this port 864.
Any links maybe that tell me (in easy language:) what IP-NAT exactly is..
Thanks..
Met vriendelijke
Looks like your PCMCIA controller needs special settings to make it work.
Check if there are any interrupts for wireless card in
/proc/interrupts. /etc/init.d/pcmcia already knows about some weird
PCMCIA controllers, so try adding yours - search for the line which
mentions Teletronics boards.
I have a Dachstein LRP with this routing table:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface
10.50.50.0 68.2.2.1255.255.255.0 UG0
0
0 ipsec0
192.168.38.00.0.0.0 255.255.255.0 U 0
Hello all,
I have problems establishing a pptp connection between Bering RC3 poptop
server and a Win2k client. I'm using the patched pppd 2.4.1 (pppd-pptp) as
described in Bering installation guide
(ppp-2.4.1-openssl-0.9.6-mppe-patch.gz;ppp-2.4.1-MSCHAPv2-fix.patch.gz). Trying to
bring up the
This is a new one to me. I hope someone else will turn out to be familiar
with it and post a simple solution, but I wouldn't count on it. (I waited
awhile before replying, in this hope.)
I am reasonably sure that IP-NAT is just a slightly more exact synonym for
NAT. At least every reference I
Hi,
I am upgrading to the latest version of the bewan adsl pci card drivers
(http://www.bewan.com/bewan/drivers/bapst-0.3.4.tar.gz)
I have setup up the debian/slink virtual uml and compiled the driver, but when I try
and load the module I get
# insmod unicorn_atm
Using
On Saturday 21 September 2002 12:28, Ray Olszewski wrote:
This is a new one to me. I hope someone else will turn out to be
familiar with it and post a simple solution, but I wouldn't count on
it. (I waited awhile before replying, in this hope.)
I'll have to agree with Ray one this one. There
How To set Date Time - 3 questions
I ) Is there a DateTime HowTo for leaf?
II ) I've forgotten how to set the date, time timezone under leaf
(bering)
for the system, user, and the cpu's clock. Where are examples of
the
correct usage for the commands documented?
I have determined it is specifically build (2324) that is giving me the problem.
with build 2312 the AP mode worked. with build 2324 it did not ( I could not get any
cards including a lucent silver card to connect to the AP )
I created an .img and burned to flash with the latest build 2341
[EMAIL PROTECTED] wrote about Re: [leaf-user] wisp-dist ... Client cannot hear
AP:
I have determined it is specifically build (2324) that is giving me the problem.
with build 2312 the AP mode worked. with build 2324 it did not ( I could not get
any
cards including a lucent silver card
[EMAIL PROTECTED] wrote about [leaf-user] wisp-dist -- How do I do an upgrade
using the upgrade option?:
wisp-dist -- How do I do an upgrade using the upgrade option?
I can't seem to locate any documentation on this.
http://leaf.sourceforge.net/mod.php?mod=userpagemenu=90801page_id=28
is ntpdate available in a .lrp
for leaf dachstein/bering?
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
leaf-user
On Sat, 21 Sep 2002 18:53:42 -0400 lbilyeu wrote:
How To set Date Time - 3 questions
I ) Is there a DateTime HowTo for leaf?
Not sure if it has made it into formal documentation yet, but
Jeff Newmiller was kind enough to write this document about
setting the timezone:
On Sat, 21 Sep 2002 19:39:37 -0400 lbilyeu wrote:
is ntpdate available in a .lrp
for leaf dachstein/bering?
ntpclient from
http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/leaf/devel/helices/
should fit the bill and works under Dachstein and Bering. It
includes an init.d startup script for
Support Requests item #606429, was opened at 2002-09-08 13:16
You can respond by visiting:
https://sourceforge.net/tracker/?func=detailatid=213751aid=606429group_id=13751
Category: Release/Branch: Bering
Group: None
Status: Closed
Priority: 5
Submitted By: Tom Harr Jakobsen (harjakob)
Assigned
Dave,
On Sat, 21 Sep 2002 21:21:32 +0100 Dave wrote:
Hi,
I am upgrading to the latest version of the bewan adsl pci card drivers
(http://www.bewan.com/bewan/drivers/bapst-0.3.4.tar.gz)
I have setup up the debian/slink virtual uml and compiled the driver,
but when I try and load the
On 2002.09.21_20:44:29_+, Brad Fritz wrote:
Since these are kernel modules, I don't think you need to use slink to
compile them. Only Dachstein and Bering userspace code needs to be
compiled against glibc-2.0.7. Hopefully someone more knowledgeable
will correct me if I have mis-spoken.
21 matches
Mail list logo