Does anybody know where I can get a really good newsreader for KDE. You know
one with lotsa features and is really easy to use. I'm looking for one that
lis like WinVN (Win95), it's still my favorite.
Adam
It did for me. I used the same modem, with the same settings, under win95
and winNT a while back. I may have had to tell it the settings but how
hard is that?
DvB
On Sun, 13 Feb 2000, Brent Timmer wrote:
> Yeah, but then windows won't find it(if you have windows, that is)
> - Original Me
Sorry,
My Windows just crashed! So,
Hello everybody,
Any suggestions for how to configure Netscape to surf
the net? I have a succesfull connection to Internet
through kppp but Netscape always returns a connection
error message " Netscape is unable to locate
server:.." "Please check server name
I'm using Mandrake 7.0 and have all of the Mesa packages installed,
including Mesa-devel, but I have trouble compiling programs that use
Mesa. The compilations fail with a messages including something like
this:
../../src/fnt/fnt.h:11: GL/gl.h: No such file or directory
../../src/fnt/fnt.h:12: G
Hi Guys:
I have just installed linux-mandrake 6.1. I selected the right printer
during the installation procedure, but whenever I try to print, I get the
following error.
lpr: connect: Connection refused
jobs queued, but cannot start daemon
Thanks,
Vishal.
__
Im not too sure. I tried two others Ive seen listed but they didnt work for
me. I could have entered them wrong, but someone else will correct me on
this.
-dpi 100 -gamma 1.6
regards
Gina
- Original Message -
From: "Adam Stark" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday,
I had that same problem. I had first installed mandrake 6.1 which had just
the swap and native partition. No /boot or /home. so I dumped all of that
and went back to having just the one full partition on my harddrive with
windows then went thru the mandrake 7 install.
(most people seem to reco
Hello everybody,
Any suggestions for how to configure Netscape to surf
the net? I have a succesfull connection to Internet
through kppp but Netscape always returns a connection
error message "server not found..check address..".
BTW I found very good suggestions on how to set the
modem here. I wo
Oops,
I'm too tired to be doing this I guess.. :)
change the /sbin/ifup $DEVICE stuff in step 2 with /sbin/dhcpcd
sorry.
Francis
On Sat, 12 Feb 2000, Francis J.Bruening wrote:
> I just set up my @home service (Oregon) on a new install of MD7.0.
>
> I wanted to use the DHCP server as opposed
I have a rather generic gamepad that connects to my soundcard... what
would I have to do to get this gamepad to work?
(Also, I still can't print in color with my HP DeskJet 672C, any help with
that would very appreciated.)
-Tom
I just set up my @home service (Oregon) on a new install of MD7.0.
I wanted to use the DHCP server as opposed to setting my networking info
statically. @Home is a bit odd, in that their DHCP server requires an
identifier from the client request in order to get a response.
1) backup /sbin/ifup (
Yeah, but then windows won't find it(if you have windows, that is)
- Original Message -
From: "David van Balen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 13, 2000 12:38 AM
Subject: Re: [newbie] "sorry,modem is busy"
> On Sat, 12 Feb 2000, George Houdek-Viskovska
I've installed and ran Mandrake 6.1 just fine before, so I decided to
upgrade to 7.0 and that's where trouble started:
First, when I designated the root directory in the partition setup of
the installation, I got this message:
The partition you've selected to add as root (/) is p
I was wondering...if anyone had an old 28.8 or 33.6 external modem
they could GIVE me...as I'm short of funds.
Also, I need to know...HOW do I find/startup a program...after
first dragging and dropping a RPM file into Kpackage to install it???
--
[EMAIL PROTECTED]
ICQ# 7110071
HomePage:
http://
I ran a port scanner to find out if the telnet port
was open and it is, but i am unable to gain access via telnet to my linux
machine. It pings fine.. i tried changing the port it was using but still it
give me this message connection failed could not open a connection on "my ip"
Any Ideas w
Hi guys:
I am running Linux-mandrake 6.1. I installed a php rms
(mod_php3-3.0.13-6mdk.i586.rpm) into my root directory (root/) and then I
tried installing the rpm using the rpm -ivh "rpm name" format.
The error I got is;
error:
libt1.so.0 is needed by mod_php3-3.0.13-6mdk
midgard-php conflicts
On Sat, 12 Feb 2000, you wrote:
> Go to:
> /usr/X11R6/lib/X11/xdm
>
> and edit "Xservers" file by changing the line entry:
>
> : 0 local /usr/X11R6/bin/X
>
> to
>
> : 0 local /usr/X11R6/bin/X -bpp 16
Thanks, that worked. What other switches are there for that entry in the
Xservers file?
Ada
First time this has happened to me... I would like to compile a new kernel
with the atapi scsi emulation thingie turned on.. So I su to root then cd into
/usr/src/linux then make xconfig... Then I get make:***No rule to make a
target `xconfig' . Stop. Ok so then i try make menuconf no good eith
On Sat, 12 Feb 2000, George Houdek-Viskovska wrote:
> Hi everyone !!
> I have problem with Kppp and minicom .
> I click on Connection and LINUX show me window with : "Sorry,modem is busy" but my
>modem is not busy ???Line, modem is OK but for Kppp and minicom is modem busy .
> Please help me .
Hmmm... now sure how to do it from the console but, if you're desperate,
you can try booting in level 5 (type linux 5 at the lilo boot) and choose
it from there.
DvB
On Sat, 12 Feb 2000, Benjamin Sher wrote:
>
> Using Mandrake 6.1
>
>
> I am typing to you from Pine in the Console.
>
> I
How to activate this
You need to create a rescue disk as well, and put it in the floppy drive
when it asks you to insert the rescue disk.
You can create the disk using rawrite from the dosutils dir on your cd and
the rescue image is in the images dir.
regards
Gina
- Original Message -
From: "RICHARD FRIEDMAN
My problem is with the LILO bootloader.
After I install LinuxMandrake 7 (recommended, customized, and even expert)
the boot stalls and displays only half the word of LILO - "LI"
After displaying LI - it stalls!!!
i tried going back into the installer and perform an upgrade and the
installation gi
I have got the NumLock auto starting when I boot up. I even see the script
call it up and the Num Lock light goes on on my keybd, but when it gets to
the Xwindows login screen where I enter user id and go into kde the light
goes off. Is there somewhere else Im supposed it initialise the NumLock?
Um,
You probably dont want to hear this but its all I can suggest what I'd do.
Perhaps reinstall fresh - selecting format new linux partitions as you go
(when it asks during the install).
Select just the basic packages for a first install, just to get it up and
running. Then go back and install
Go to:
/usr/X11R6/lib/X11/xdm
and edit "Xservers" file by changing the line entry:
: 0 local /usr/X11R6/bin/X
to
: 0 local /usr/X11R6/bin/X -bpp 16
regards
Gina
- Original Message -
From: "Adam Stark" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, 13 February 2000 11:46: a
I ran mkbootdisk and successfully created a boot disk (apparently).
When I try to boot with it (to test it), it starts booting and then asks me
to enter "rescue" if that's what I want. So, to test it out, I entered
"rescue" (no quotes of course) and it proceeds to boot. However, it soon
stops te
Thanks for the info on this. Im very familiar with Photoshop having done
desktop publishing involving alot of image editing and web development, and
couldnt ever see me using anything else. But Im curious now and can't wait
to try GIMP out.
One question I have is which html editor do I use now?
Hi Warren,
Thanks for the tip. But Ive had to use alsa latest v1.52 as it has the
support for my i8xo chipset. this is where Im at with it. Man, after
playing with this all day Im going to go have a beer and jump in the pool!
(its summer here):
I have managed to finally get somewhere. This
you can edit /etc/services and change the default port
On Sat, 12 Feb 2000, Chris wrote:
> Is it possible that cox@home has the port 23 blocked for incoming? If so is there a
>way to change the default telnet port linux uses?
>
Is it possible that cox@home has the port 23
blocked for incoming? If so is there a way to change the default telnet port
linux uses?
I am running on [EMAIL PROTECTED] linux-mandrake 7.0 I
finally reinstalled several times to get everything going right... I have
internet access kde works..but i can not make a telnet connection back to my
machine from other computers Anyideas would be great.
Chris
On Saturday, 2000-Feb-12, you wrote:
* I'm just starting to use linux, and this was my first
install(mandrake 7.0). I have very
* new hardware, and it has been slow going getting it all to work.
*
>For one, how do I get my sound card(diamond monster
mx300 p
Hi everyone !!
I have problem with Kppp and minicom .
I click on Connection and LINUX show me window with
: "Sorry,modem is busy" but my modem is not busy ???Line, modem is OK but for
Kppp and minicom is modem busy .
Please help me .
George
David Schur wrote:
> I am running a 2 hd computer 1st is all windows ( c ), 2nd is 1/2 linux 1/2
> vfat partition. ( broken into two more drives a primary and a logical - d/e )
>
> Ok i Did the stupid mistake and installed it to hda1 instead of hda yea
> stupid me, now i don't know how to r
Kit,
Download from http://bluefish.linuxbox.com
Happy writing (it's for those of us who preferr 'raw' HTML)
Andy
like you can get to text mode with "linux 3" @ lilo prompt
you can get to X login with "linux 5" & choose your windowmanager. have you
tried "mouseconfig" or whatever its called yet? Type "setup" @ command
prompt. BTW, you might be able to choose desk With "setup" too - can't
recall.
-WBD
-
Has anyone been able to get a USB Scanner to work? And how?
Seve
mandrake 7.0I download Xsane and type
tar -zxf xsane-..tar.gz and extract fine
./configure
make
in this line say "make ***no target. stop."
what i have to do?
Fernando Camacho Olmo
asdffds
mandrake 7.0
I download Xsane and type
tar -zxf xsane-..tar.gz and extract fine
./configure
make
in this line say "make ***no target. stop."
what i have to do?
Fernando Camacho Olmos
> Could anyone tell me if Gimp is an equal to Paint Shop Pro or Photo Shop
> for Windows.
I have used GIMP just for fun and I love it! Friends of mine who use it to
create graphics and edit pictures for web design all say that GIMP is
actually better than Photoshop and Paint Shop Pro. If you
David Schur wrote:
>
> I am running a 2 hd computer 1st is all windows ( c ), 2nd is 1/2 linux 1/2
> vfat partition. ( broken into two more drives a primary and a logical - d/e )
>
> Ok i Did the stupid mistake and installed it to hda1 instead of hda yea
> stupid me, now i don't know how to
Lance Borden wrote:
>
> I'm at a dead end here...sure hope y'all have some insight!
> I'm trying to recompile my kernel for my zip100 parallel port drive. When I get
> to the 'make bzImage' step, I get the following error message every time:
>
> gcc -06 -fomit-frame-pointer -fno-exceptions -fno-
type "lilo -u /dev/hda1"
This will remove lilo and restore your boot sector to what is was
previously(as far as I know because I've tried it after having this
problem). I forget exactly where it backs it up and the file name, but it
does and this works great.
Brent Timmer
EE, CS
Thanks very much, this has been very helpful.
Brent
>Also look at http://www.linuxberg.com for additional software.
>As far as how to install software... (Assuming you know as much as I did
when I first started - Zero)
>When you download files with the extension of RPM, you can click the RPM
Benjamin Sher wrote:
>
> Using Mandrake 6.1
>
> I am typing to you from Pine in the Console.
>
> I have been having endless problems with my mouse.
>
> I thought I would try testing it in Gnome. Well, it's even worse in Gnome.
> In KDE, my mouse lasts about 5 to 10 minutes. In Gnome, it dies a
sdos wrote:
>
> Hello, I have recently installed Mandrake 7, and love it, only problem I
> have is I have 2 network cards, one in a linksys ehter16 isa, and the other
> is a 3com 506b isa (which I believe some one has posted about already) I
> can't get either one to work, it sees the 3com for su
Mike wrote:
> H, that is a humungeous amount to read and understand :-(
> Let us assume for a minute that I am a total idiot.
> Its easy really, my wife does it all the time :-(
>
> How would one such as me go about adding my 2nd EIDE CD type device and then
> setting it up as a
Benjamin Sher wrote:
>
> Dear friends
>
> (Using Mandrake 6.1)
>
> My mouse freezes in Netscape and elsewhere in X windows (KDE) and in the
> Console. It was working fine for months and now is constantly breaking
> down (every few minutes -- I hope I can get this message out before it
> breaks
> Brent Timmer wrote:
>
> What is knome and what is kde? I installed mandrake 7.0, and when I
> log on, I see both applications. A lot of them look a lot alike.
> Also, when I change the setup of the screen saver for gnone to one
> thing, and for kde to another(in the same session), neither on
Hi - Now that I have my mandrake boxen pretty well working the way I
want them to and have learned barely enough to stay out of trouble, I'm
trying to get out of the bad and dangerous habit of logging in as root.
Most of the time this is no problem - if I need to run, for example,
klilo or kpacka
Could anyone tell me if Gimp is an equal to Paint Shop Pro or Photo Shop
for Windows.
I design wed sites and use PSP and PS for all of my graphics, however
as I become more impressed with my MD6-1 installation I wish to move away
from Windows and stick with Linux (especially since I have downloade
Hey...what do the -r , -s, -n things mean? i
know there are morecould someone explain them to
me?
I have a scsi CD rom and had some problems when I added my IDE burner.
Here's what I found:
You may want to consider X-CD Roast for your CD burning. You can get
information on it at:
http://www.fh-muenchen.de/rz/xcdroast
It came with my Mandrake 6.1 distribution.
X-CD-Roast uses a command line
First of all...read the HOWTO on NIC's and there is also one on Cable
Modemsonce your NIC is correctly setup, all I had to do was choose the
INSTALL NIC in initial startup after INSATLLING, put in the IP (IP, DNS,
Gateway) info, including the account NAME, and presto...it worked...mine for
wha
I currently use A.T.&T. as my ISP. How do I setup their service under
Linux-mandrake 7?
How do I change the color depth for KDE/Xwindows? I seem to be stuck with
8-bit, but I would like to change it to 16-bit.
Thanks
I tried installing OSS (the paid version) won't
install and it's telling me that my Kernel is 2.2.14-1mdk. Is Mandrake
7.0-2 using a different kernel from what it's claiming?
Seve
First of all, did you ever get your mouse fixed by going into "setup"?
Seve
-Original Message-
From: Benjamin Sher <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Saturday, February 12, 2000 12:14 PM
Subject: [newbie] Urgent -
i fixed that by rinstallign windows.
peace,
ali
David Schur wrote:
>
> I am running a 2 hd computer 1st is all windows ( c ), 2nd is 1/2 linux 1/2
> vfat partition. ( broken into two more drives a primary and a logical - d/e )
>
> Ok i Did the stupid mistake and installed it to hda1 instead of
Ok, here we go...
fire up DrakConf
Click -> Network Configuration
Go to -> Basic Host Information
-> for Hostname Tab| Hostname: put in the Host name from TCP/IP Properties | DNS
Configuration Tab from your winbox
Go to -> the Adapter 1 Tab (linbox)
"Primary name + Domain" should be the same as
- Original Message -
From: "Gina" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, February 13, 2000 2:06 AM
Subject: Re: [newbie] compiling problem
> When I installed Mandrake I used the "recommended" option. Which also
> doesnt give you any options on what packages you want
Dave/Tonyhere's the URL for Ranish Partition Manager:
http://www.users.intercom.com/~ranish/part/
Alan
Tony wrote:
>
> try program called Ranishes Partition Manager, I had a problem with a
> partition fdisk did not recognise and this program removed it OK, you have
> to study the manual/h
TyI guess you meant this one.
x:5:respawn:/etc/X11/prefdm -nodaemon"
Alan
Ty C.Mixon" wrote:
>
> I've been playing with inittab, and now I get an error that doesn't
> seem to affect anything, but it's annoying:
>
> x Id respawning too fast. Waiting 5 minutes.
>
> And as you might imagi
try program called Ranishes Partition Manager, I had a problem with a
partition fdisk did not recognise and this program removed it OK, you have
to study the manual/help as its not as obvious as it might be.
- Original Message -
From: "David Schur" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED
Hello,
I'm masquerading some friends of me to get them on the internet over my
modem. I use ipchains command to make the chains. Everything works ok
except for the:
ipchains -L -v command wich returns about 20 times smaller values for
their transfers than in reality. If I have an overall bytes in
Thanks for replying Seve, yes they did give a static IP. I have recorded
all my internet settings to include, static IP address, DNS Server Search
Order, Domain Suffix Search Order, Domain, Host, Gateway, Subnet Mask, what
my computer name and workgroup is supposed to be. I can set this up by
me
"ChOPpY C. Chipper" wrote:
>
> it doesn't say "modem is busy or whatever".
> instead now, it just stops when it says "initiliazing modem"
> don't know how to continue, modem dosen't click like when it onrmally starts
> dialing! I have enabled xon/xoff, which fiex my original problem!
>
> Th
Ron Burns wrote:
I am
> trying to install an RPM that says it has a dependancy
> on libjpeg.so.6. Is this not a file that is required by alot of KDE
> apps? Please help.. so far this is the second app that requires this
> library and it remains elusive.
>
Ron, I had to go hunting for that
Did @Home give you a static IP address?
Seve
-Original Message-
From: J Winkle <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Saturday, February 12, 2000 11:42 AM
Subject: RE: [newbie] Cable Modem Setup
>Sorry,
>Mandrake 7.0
>Network Adapter = Intel EtherExpress Pr
I've been playing with inittab, and now I get an error that doesn't
seem to affect anything, but it's annoying:
x Id respawning too fast. Waiting 5 minutes.
And as you might imagine it pops up in a terminal every 5 minutes.
It's coming from the fact that the x:5:respawn: line is
wrong now. I
Does anyone know of one?
I've had a go at slrn for news but it feels a bit too archaic for me!
I am running a 2 hd computer 1st is all windows ( c ), 2nd is 1/2 linux 1/2
vfat partition. ( broken into two more drives a primary and a logical - d/e )
Ok i Did the stupid mistake and installed it to hda1 instead of hda yea
stupid me, now i don't know how to remove it!
Any Ideas ? I tried
Ron Burns wrote:
>
> Hi everyone I have Linux Mandrake 7.0 succesfully installed on my
> machine!!! What a treat in comparison to the usual boring Windows. I am
> trying to install an RPM that says it has a dependancy
> on libjpeg.so.6. Is this not a file that is required by alot of KDE
Also look at http://www.linuxberg.com for additional software.
As far as how to install software... (Assuming you know as much as I did when I first
started - Zero)
When you download files with the extension of RPM, you can click the RPM files and the
install process is similar to that of wind
>Don't feel bad Larry. I went to a Linux users group, and
Microsoft was>spamming an advertisement for Windows 2000 there
!
From
ZDTV
Bugfest! Win2000 has 63,000
'defects'
Urging developers to clean up their code, a Microsoft exec says:
'How many of you
>Hey Brian I just went to a Kplug meeting and there was a speaker there
>for Corel What he told us was that Corel uses Debian for the OS and
>a modified KDE for the desktop. I have heard it is real easy to install
>taking all the brain work away.
Sometimes I rather have a little involveme
I'm at a dead end here...sure hope y'all have some insight!
I'm trying to recompile my kernel for my zip100 parallel port drive. When I get
to the 'make bzImage' step, I get the following error message every time:
gcc -06 -fomit-frame-pointer -fno-exceptions -fno-rtti -pipe -s -mpentium
-mcpu=pen
yes during instal.
On Fri, 11 Feb 2000 23:03:51 -0500 root <[EMAIL PROTECTED]> writes:
> Well two things, when are you getting this error? During the install?
>
> And on the other note, i am running 7.0.2 air! on a 133 mhz intel
> pent w/
> 48mb ram and i gotta say it runs so very smothly ( as
Using Mandrake 6.1
I am typing to you from Pine in the Console.
I have been having endless problems with my mouse.
I thought I would try testing it in Gnome. Well, it's even worse in Gnome.
In KDE, my mouse lasts about 5 to 10 minutes. In Gnome, it dies almost
instantly. And now, when I try
Hello, I have recently installed Mandrake 7, and love it, only problem I
have is I have 2 network cards, one in a linksys ehter16 isa, and the other
is a 3com 506b isa (which I believe some one has posted about already) I
can't get either one to work, it sees the 3com for sure, but I don't believe
"Brent Timmer" <[EMAIL PROTECTED]> wrote:
> -
> Attachment:
> MIME Type: multipart/alternative
> -
> I'm just starting to use linux, and this was my first install(mandrake 7.0).
I have very n
Sorry,
Mandrake 7.0
Network Adapter = Intel EtherExpress Pro 10+/ PCI
Jim
What Mandrake are you using?
Seve
~~~
>Hi All,
> I am using a cable modem (Comcast @Home in NJ) to connect to the
>internet and can not, for the life of me, figure out how to configure
Dear friends
(Using Mandrake 6.1)
My mouse freezes in Netscape and elsewhere in X windows (KDE) and in the
Console. It was working fine for months and now is constantly breaking
down (every few minutes -- I hope I can get this message out before it
breaks down again).
Here are the messages I go
What Mandrake are you using?
Seve
-Original Message-
From: J Winkle <[EMAIL PROTECTED]>
To: Newbie <[EMAIL PROTECTED]>
Date: Saturday, February 12, 2000 11:21 AM
Subject: [newbie] Cable Modem Setup
>Hi All,
> I am using a cable modem (Comcast @Home in NJ) to connect to the
>intern
On Sat, 12 Feb 2000, you wrote:
>
> Good afternoon ..:)
>
> To make your burner work as a burner your have some extra work ahead of you. A good
>point to start is the following URL:
>http://metalab.unc.edu/pub/Linux/docs/HOWTO/CD-Writing-HOWTO
>
> Ingo
H, that is a humungeous am
Hi All,
I am using a cable modem (Comcast @Home in NJ) to connect to the
internet and can not, for the life of me, figure out how to configure it
(correctly) to actually get on the internet. I have found most(?) places
that would configure it. But am not sure of the translation between Win9
Good afternoon ..:)
To make your burner work as a burner your have some extra work ahead of you. A good
point to start is the following URL:
http://metalab.unc.edu/pub/Linux/docs/HOWTO/CD-Writing-HOWTO
Ingo
-Original Message-
From: Mike [SMTP:[EMAIL PROTECTED]]
Sent: Saturday, Fe
Yea, me 2, I have a DVD and Burner, it recognizes the burner under /mnt but
does not let me load it! the DVD drives works thougH!
help on this would be gladly apreciated!
-Julien
- Original Message -
From: Mike <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, February 12, 20
Chris,
After looging in type startx at the prompt. The screen will go grey for a
few seconds and then the KDE will load.
Andy
On Thu, 10 Feb 2000, you wrote:
> kdedesktop from the console
>
> -Original Message-
> From: Chris [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, 10 Febr
On Sat, 12 Feb 2000, you wrote:
>
> I am quite new to the Linux platform, but so far i love it. There is one small
>problem i have two cd drives one dvd and one burner.
The system always recognizes and mounts properly the standard drive. The
secondary cd burner it never recognizes and i'am a
I just wanted to mention to those who said that there performance
was slow that gnome is much faster. I use gnome when I feel the need
for speed :) Netscape will open almost twice as fast under Gnome as
it will under KDE. I have tested this several times. Also a friend
of mine will only use Gnom
yeah, I can host it for you on either a T1 or 386kb dsl, apache or iis4
- Original Message -
From: "Vic" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 11, 2000 4:12 AM
Subject: [newbie] Re-router
> Hi any one know of any decent re-router services for a guy on cablem
To all those who asked before Open the file etc/inetd.conf.
Then comment out the services you dont want by adding
a "# " before the service line with out quotes. This will remove the
service you wish removed
--
QOTD:
I'm not a nerd -- I'm "socially challenged".
I also can not get kde going and when i login i tried typing kde and nothing
works. should i re-install and only select one window manager for install?
or is this a gnome and kde problem. If it is why?
-Original Message-
From: Audrey Beck [mailto:[EMAIL PROTECTED]]
Sent: Saturday, Februar
Hi everyone I have Linux Mandrake 7.0 succesfully installed on my
machine!!! What a treat in comparison to the usual boring Windows. I am
trying to install an RPM that says it has a dependancy
on libjpeg.so.6. Is this not a file that is required by alot of KDE
apps? Please help.. so far
I am quite new to the Linux platform, but so far i
love it. There is one small problem i have two cd drives one dvd and one
burner. The system always recognizes and mounts properly the standard
drive. The secondary cd burner it never recognizes and i'am a little bit
lost and how to fix th
CyberI'm sorry you're not getting any response to your
problem. I'm sure it's not because people are ingoring you for
some reason, but instead because, like me, they haven't
experienced a problem like yours and therefore haven't anything
helpful to contribute. Perhaps if you expanded your de
BrianYou're very welcome. MacMillan vs. Mandrake!? Boy,
that depends on a lot of different factors. If monitarily
supporting the Mandrake folks who put a lot of time, money and
effort into the Mandrake distribution is important to you then
the obvious answer would be to buy the mandrake pow
1 - 100 of 116 matches
Mail list logo
