input reconnect delay time”
However in setting this feature to 6 minutes the inverter reconnects after a
few seconds like normal.
Any suggestions as to fix or programming tips?
Thanks
Jay
Peltz power.
___
List sponsored by Redwood Alliance
List
Putting a battery that generates massive amounts of hydrogen into a boat seems
like a really bad idea to me.
Jay
Peltz Power
> On Jul 10, 2018, at 2:34 PM, Hilton Dier wrote:
>
> Thanks for all the responses. The people on this list are gold standard. I’ll
> look into
Hi Jerry,
Can the new EMU work with the older units?
Jay
Peltz power.
> On Jul 6, 2018, at 11:59 PM, Jerry Shafer wrote:
>
> Wrenches, Ron
> Thats a good thing with enphase, mix and don't need to match, you will need
> inverters that connect in line or just seperate the
.
I’m asking if anyone has another avenue, or advice on how to proceed?
OB charges a lot for the upgrading since Alpha took over, which makes it not
worth doing.
Thanks
Jay
Peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches
Hi david,
As someone who has a pellet stove, I wouldn’t buy another.
I’d go with a kerosene heater, direct vent.
Cheaper to operate, bulk fuel, cleaner, no mx, and probably uses less
electrical energy and more efficient I think. ( no glow bar to start the burn
cycle).
Jay
Peltz Power
>
has some current info, recommendations, best price etc.
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches
Hi Bruce
You might check with Sunwize, or AMERESCO
Jay
> On Jun 7, 2018, at 4:02 PM, Bruce Erickson wrote:
>
> Hi All,
> I have a super particular customer who needs a small top-of-pole rack, but
> will not accept anything but aluminum or stainless (or bronze or titanium
manual)
Also I know that the Magnum allows you to charge with just 120v and I think the
XW is the same, OB
you have to have 240v.
Cheers
jay
> On May 30, 2018, at 7:52 AM, Dave Angelini Offgrid Solar
> wrote:
>
> The 8kw radian still has to have balance! You can't expect i
HI All,
Any of you installing the Pika equipment? Thoughts and is there retail pricing
that can be shared?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
Lead melts at 621.
Plastics melt depending on the type between 212f and 491f ( for the most common
ones)
http://education.seattlepi.com/hot-water-melt-plastic-3626.html
But melting and being able to be deformed is very different.
jay
peltz power
> On May 10, 2018, at 2:48 PM, Ch
going to be dinged up, and scratched, they can’t be used for any
system that’ll qualify for tax credits/rebates.
I’d say $.05 per watt, and maybe they should be paid to take them off the roof.
jay
peltz power
> On May 4, 2018, at 10:07 AM, Kristopher Schmid wrote:
>
> Greetings
good not to use.
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Arc
Hi Darryl
It has to do with the zero point crossing.
With pure sine wave, it crosses almost vertical angle so no time spent there.
Mod square wave usually has a flat crossing, totally screws certain things up.
Jay
Peltz power.
> On Apr 24, 2018, at 8:39 AM, Darryl Thayer wrote:
>
Hi all.
This unit will be in a warm climate so no problems there.
Are you all saying the build in AC/shore power charger is extremely
inefficient?
Jay
> On Apr 9, 2018, at 1:46 PM, Michael Morningstar
> wrote:
>
> Yes, the Cummins technician that commissions our genera
can get it to work with 2 wire AGS.
Onan also has one as well.
Are there any other make/models that people would recommend or would caution me
against?
Thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches
installed with solar in mind, lots of fasteners.
Hes very competent and pays attention to details.
Any positive/negative recommendations.
thanks in advance,
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re
Does anyone know the K/O sizes, spacing on the MNBCB?
I can’t find any spec sheet on it and midnite hasn’t gotten back to me.
I’m trying to figure out if any of the KO’s match the Classic charge controller
KO spacing.
Thanks
Jay
Peltz power
HI All,
If anyone has one or knows where to get a Sharp ND-167U1F?
Please let me know off list
thanks
jay
Peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & sett
Hi Jerry,
Curious what amp rating the fuses are and what the ISC rating of the modules
are.
Thx
Jay
Peltz power.
> On Mar 17, 2018, at 8:26 PM, Jerry Shafer wrote:
>
> Wrenches
> I have a question that I do not have an answer for that I can prove, here it
> is, I have 25
kind of product I just don’t have any ideas
of power consumption.
thanks
jay
peltz Power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches
OK all,
I have a question about their tile roofs.
Anyone know if they are set up for module level shut down?
Or anybody have any anything about them?
And I heard that they are advertising for installers, ie they are starting a
new not Solar city install company?
Comments?
thx
jay
HI All,
I’ve got a client asking me about Lorentz pumps.
I know they have sort of come and gone from the USA.
Is anyone using them, have any pros/cons vs Grundfos and where to get them?
thanks
jay
peltz power
___
List sponsored by Redwood
fits the
fill pretty well.
Are there any others or does anyone have anything to say about these models
from Onan?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
This product has been out now and maybe its doing a similar thing as this not
available product B3?
http://connectder.com/products/
jay
peltz power
> On Feb 22, 2018, at 3:54 PM, Dana wrote:
>
> Per my Master AC electrician, you do not have to arrange for a meter pull
> with
fraction of a percent.
If the frequency shift is doing nothing more than turning the GT inverter off (
no stepped regulation) then why do that vs relay? It still makes for a 5 minute
delay on restart, correct?
Thx
Jay
> On Feb 15, 2018, at 7:48 AM, Mac Lewis wrote:
>
> Hi Wrenche
Hi mike,
Install a tristar between the wind machine and the batteries like normal.
Just set the absorb volts way high. That way it will never get to absorb and
hence not regulate.
I use this technique with hydro often, but with MPPT.
Jay
Peltz power.
> On Feb 15, 2018, at 6:58 AM, M
If its an old pump, you don’t say then all sorts of bad things are possible as
parts wear out, all that.
And it could also be your inverter which is probably getting pretty old as
well. I’m starting to see the old SW’s fail and have all sorts of weird
problems.
my 2 cents.
jay
> On Fe
HI All,
Does anyone have any experience with the Outback FM -100 CC?
thoughts, pros cons etc?
Its new but I’m sure there are some of you out there that have been using it.
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address
So why not use one of the garage doors that has a built in backup battery and
just charge the built in battery directly?
Its got all the internals already done?
Install a CC and PV module and you are all done?
Jay
peltz power
> On Feb 1, 2018, at 12:18 PM, Jerry Shafer wrote:
>
their money guy.
Thanks again all,
jay
> On Jan 23, 2018, at 2:24 PM, penobscotso...@midmaine.com wrote:
>
> Hi Jay,
> My advice is walk away unless they want to meet your terms. You will
> save yourself a tremendous amount of trouble/waiting/lost sleep/lost
> mon
off grid, no permits, in Mexico, remote site and pretty big:
16kw inverter, 9kw PV, etc.
Thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
HI Mac,
Sunpower used to have a white paper that showed positive ground was only needed
above a certain voltage. Like 200v+ from memory.
I don’t know if these particular modules would fall into that category.
jay
peltz power
> On Jan 20, 2018, at 9:59 AM, Jerry Shafer wrote:
>
>
HI Darryl,
What size battery are you looking for? In a battery enclosure etc?
jay
peltz power
> On Jan 19, 2018, at 10:25 PM, Darryl Thayer wrote:
>
> I am about to order AGMs for two backup power systems, help, they will be in
> float all the time (except for emergencies. I h
start.
So yea maybe a bit overkill but its a long long ways to go for a site visit.
And again,
50 amps max ( 30 really) and would be good to have built in mechanical bypass.
Nema 1
thanks,
jay
> On Jan 19, 2018, at 7:36 AM, Dave Angelini Offgrid Solar
> wrote:
>
> I think so
HI All,
I”m curious how you are all dealing with the arc fault requirement for CC’s?
thx
jay
peltz power
> On Jan 18, 2018, at 2:58 PM, Dave Angelini Offgrid Solar
> wrote:
>
> Yep same here the ubiquitous CH361 and a midnite SPD and a Delta. I very
> rarely need more th
Can you tell us:
Battery make,model and size?
Jay
Peltz power.
> On Jan 15, 2018, at 12:32 PM, Daniel Young wrote:
>
> Hello Wrenches,
>
> I have a client that is running into an issue with his off grid system. The
> system is 3yrs old and they are starting to notice
mexico.
There is the Iota of course, but was just looking for options.
thx in advance,
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
Hi Ray
Here are a ton of newer clips that carry 2-many wires, in different
configurations, straight, 90 degree etc
Most in SS some now in synthetic.
And yea it’s kind of a pain with that type racking.
Talk to Bryan at PV cables, he stocks lots of them.
707-923-3000
Jay
Peltz power
>
ng the way we power the world
Jay
peltz power
> On Jan 6, 2018, at 8:26 AM, Drake
> wrote:
>
> Will these work on Sunny Island systems?
>
> Thanks,
>
> Drake
>
> At 04:04 PM 1/4/2018, you wrote:
>
>>
>> JayOur office has done research on
While we are talking about batteries,
Does anyone have any experience with the Blueplanet lithium for off grid?
Do they communicate with the inverter system is a big question?
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address
Does anybody have any experience or info about these batteries?
Thx in advance
Jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches
some evidence to
change their mind. I get that, I’d want evidence too.
Cheers,
jay
> On Dec 23, 2017, at 3:18 PM, Dan Fink wrote:
>
> Just look at the latest UL test results on tarps, and firefighter foam. A
> tarp blowing off in some wind could expose workers to a
Hi All, happy holidays.
I’m looking for any studies or data about the dangers of “covering modules” and
assuming they are safe to work on.
I have a group that I think is going to need some harder data than me telling
them it’s not safe.
Thanks
Jay
I’ve used Iota or Powermax over the years for this exact situation with great
reliability.
Maybe today there are less expensive options?
Jay
Peltz power.
> On Dec 19, 2017, at 6:15 AM, Roy Butler wrote:
>
> FYI.It appears that Solar Converters may be out of business.
>
Hi all
I can’t seem to find much information at all on the interstate web site.
I’m trying to find out charging information and maybe cycle curves for someone
with interstate L-16 HCL.
Any ideas?
Thx
Jay
___
List sponsored by Redwood Alliance
A mate 3 will work with any OB model.
I’ve got one on my 14 year old vfx
jay
> On Dec 17, 2017, at 11:44 AM, Sindelar Solar wrote:
>
> Ron,
>
> I agree with Jerry here, and will add a bit more. I'll venture that neither
> generator is being seriously hurt, but neit
HI Jerry,
If you were installing a UPS system, would you need permit?
I’m asking, I don’t know.
Jay
> On Dec 13, 2017, at 2:02 PM, Jerry Caldwell wrote:
>
> Dear Wrenches,
> Has anyone installed storage battery systems with no PV or other generation
> source? I see n
some combo.
jay
> On Dec 6, 2017, at 4:18 AM, Mac Lewis wrote:
>
> Hello wrenches,
>
> I've got a mysterious breaker tripping that I need some ideas on how to fix.
>
> Original system:
> Array 6 x 235W Kyocera modules
> 1 x Outback FM60 charge controller
&
all the help
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
So I”m curious about the location of your breakers. Can you elaborate about
that?
Thanks
jay
peltz power
> On Dec 2, 2017, at 1:51 PM, Gary Willett wrote:
>
> JERRY:
>
> I always specify separate breakers per string (175A or 250A, depending on
> string ampacity) mount
HI All,
I’m wondering if anyone has a good source for battery buss bar stock.
Either pre made ones or stock I can use to make myself.
It would be for larger Rolls GEL 2v in this case but other battery sizes/types
as well.
thanks
jay
peltz power
Does anyone know how they actually operate?
I”m thinking they are using a variable AC voltage output from the micros to
operate at MPP matching the resistance of the heating element?
IE more PV watts, higher AC voltage, more load. Lower PV watts, lower AC
voltage, less load?
Thanks,
jay
Has anyone used the Franklin pump Fhoton solarpak, Fhoton HR Solarpak, or the
sub drive solarpak?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address
main inverter breakers.
thanks
jay
Peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches
Hi All,
I’m having trouble finding adjustable slide style back legs for a client who
wants to adjust his low profile array.
I can’t find them from Iron Ridge, Unirack, DPW,
Where/who can I get them from?
thanks
jay
peltz power
___
List sponsored
To follow along with the lithium questions,
I’m wondering what thoughts/information people have on prismatic vs cylindrical
lithium family batteries?
My questions are quality,cycle life, pros/cons,recycling?
Thanks
jay
___
List sponsored by
I would imagine that if the breaker and enclosure had the correct AIC ratings
it should work.
But its PG&E, enough said.
jay
peltz power
> On Oct 3, 2017, at 10:21 AM, Jerry Caldwell wrote:
>
> Dear Wrenches with experience in PG&E territory:
> I'm installing a sy
Hi All,
I’m looking for a lithium battery for a street light lead replacement.
Size is approximately 30 - 40 amp hrs, 12v and BMS included is preferred.
Any recommendations out there?
thanks
jay
peltz power
___
List sponsored by Redwood
Can you be more specific about the fndc interface issues.
What wasn't working and the fix is new M3s firmware yet to be released?
Thx
Jay
> On Sep 20, 2017, at 4:10 AM,
> wrote:
>
> Seems earlier versions of the 3s had a glitch that didn't play nice with
> F
I”m looking for a video of how to use the SCP that I can forward to a client.
thx
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://list
design for dust.
The fan doesn't blow across the power electrics, but behind it over the
transformer and FET heat sink.
Jay
Peltz power.
> On Sep 1, 2017, at 11:41 AM, William Miller wrote:
>
> Friends:
>
> I am designing an off-grid system that will be in a pr
Hi Dan
You can use the shunt MV reading via say fluke 87 to double check the amps that
your clamp on is reading.
Jay
> On Aug 28, 2017, at 2:47 PM, Dave Angelini Offgrid Solar
> wrote:
>
> Looks like you need a 2nd meter to test the sushi... --Dave
>
>
> Dave Fox
Does anyone know anything about Elithion BMS systems?
Or had experience with them?
Would be used for control on tesla salvage batteries, to control upper/lower
voltage safety relays.
thanks in advance,
jay
peltz power
___
List sponsored by
Hi Ray
I believe it's been replaced by the scala 2
And seems like a much better pump too.
Jay
> On Aug 11, 2017, at 1:17 PM, Ray wrote:
>
> We've used the Grundfos MQ series for years for exactly that purpose.
>
> Chief Technical Officer, RemoteSolar.com
> BS Mec
example)
The BMS turns off the loads, but what turns off the BMS and how do you turn it
back on when it happens?
Thx
Jay
Peltz power
> On Aug 9, 2017, at 6:21 PM, Dave Angelini Offgrid Solar
> wrote:
>
> FYI, the LG Chem RESU10 consumes about 40 watts or less with the XW+ main
&
wever one of the questions no one seems to
have an answer for is energy consumption for the BMS, any BMS.
On a different note, how does the LG or PW deal with dark start? If it shuts
down due to low voltage, how do you get it started again?
Jay
> On Aug 4, 2017, at 4:26 PM, Dave
what updates, reviews can you give us on those power walls?
jay
> On Aug 4, 2017, at 12:51 PM, Marco Mangelsdorf wrote:
>
> Tesla has been shipping the AC PWs to its dealers and we have been installing
> them.
>
> marco
>
> On Friday, August 4, 2017, <mailto:
very easy set up compared to all the other ones I’ve seen.
No fans/computers so can be installed in a non clean environment.
I would use them again.
jay
peltz power
> On Aug 4, 2017, at 12:04 PM, Tom Lane wrote:
>
> Does anyone know about or have experience with SimpliPhi Piw
during morning
battery fill up before sell mode and the client has a backed up loads panel
connected to it?
jay
peltz power
> On Jul 17, 2017, at 8:19 AM, Drake
> wrote:
>
> Hi Dan and Dave,
>
> The system did not crash.
>
> I think it must be a combination of the
HI All,
DPW used to have pole depth/concrete base size “ recommendations” but I can
longer find them.
Does anyone have any advice on this?
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re
same
day or next day drop ship from OB.
Hope this helps.
jay
peltz power
> On Jun 28, 2017, at 5:19 PM, frenergy wrote:
>
> Jay,
>
>I just had an FM80 fail in a FP1, less than a year old. Called
> 6:30 AM and waited 20-30 minutes for help. I had checked
HI Tump,
Yep that part has been true for a while.
I find most distributers don’t have them.
But I have gotten them from “thesolarbiz.com”
Also they sell brand new ones with full warranty vs refurbished ones with 90
day warranty.
jay
peltz power
> On Jun 28, 2017, at 9:01 AM, Tump wr
tuesday ( yesterday) and
still nothing as to tracking/email etc.
Anyone else having these kinds of issues.
I do have to say that usually they are normal and timely.
But not this time.
jay
peltz power
___
List sponsored by Redwood Alliance
List
HI Dana,
Can you tell us about this 10 year working life. Is there a website having
such info or??
thanks
jay
peltz power
> On Jun 27, 2017, at 12:52 PM, Dana wrote:
>
> I use & recommend an Energy Star Refers & do the math: A 512 Kwhr per year
> REF / 365 = 1402 Kwh
make sense to remove/reroof in that area. And the roof can
handle the weight without removing the tiles.
thanks in advance,
Jay
Peltz Power.
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver
Hi dave
How about a buck transformer
Jay
Peltz power.
> On Jun 22, 2017, at 5:38 AM, Dave Tedeyan wrote:
>
> Hi All,
>
> Is anyone out there familiar with PV Powered inverters?
> If so, is it possible to adjust the voltage setpoints? The
> installation manual I
You can fit a 2 wire start with aftermarket kits for Honda generators.
Jay
Peltz power.
> On Jun 16, 2017, at 7:36 AM, Kevin Pegg wrote:
>
> You could use a 2 -> 3 wire converter such as the Atkinson GSCM module that
> will take the 2 wire output from the SI and conve
Solar World Sun Clips are what I would use.
Jay
Peltz power.
> On May 24, 2017, at 6:28 AM, AE Solar wrote:
>
> With Solarworld/SnapNRack we run wires in the rail and use clips on the long
> edge of the frame when needed. SnapNRack has a clip that fits in the upper
> rail
What connectors are they, and are you using same brand when you connect to
comber/junction box?
I have seen issues with non same connectors.
jay
peltz power
> On May 8, 2017, at 7:44 AM, Howard Arey wrote:
>
> Sunpreme GxB-360.. Datasheet attached.
>
> 95% of the issues
ight try if an inverter engineer might talk with the utility engineer.
And I’ve actually got one on my house. Its one of the first installs in
northern California, and not only is the a lockable disco, its locked ON.
jay
peltz power
> On May 2, 2017, at 9:50 AM, Mac Lewis wrote:
>
&g
HI Dave
Every one I’ve ever seen is replaceable.
The sealed units come with a short 1/2” temp sensor, and the vented units come
with a temp sensor mounted to the transformer.
But its the same attachment, small 2 pin polarized connector.
jay
peltz power
> On Apr 30, 2017, at 1:45 PM, D
Hi Dave,
Did you replace the temp sensor?
Jay
Peltz power.
> On Apr 30, 2017, at 6:30 AM, Dave Palumbo wrote:
>
> Wrenches,
>
> We recently swapped in a new internal fan on a OB FX 2524T after the original
> fan stopped working on the 6 yr old inverter.
>
> Now
Grundfos SCALA2
its the new version of the MQ pump.
jay
peltz power
> On Apr 27, 2017, at 7:39 AM, Dave Angelini Offgrid Solar
> wrote:
>
> What has been the reliability issue with Grundfos? I have not had any
> problems with them other than the above ground electroni
just haven’t been able to figure out how this aspect of the design.
Wondering if anyone out there has any info?
thanks in advance,
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change
the 3rd.
Utility was fine with the other two which were added one at a time. ( 1 per
year, this being year 3)
Jay
Peltz power
> On Mar 24, 2017, at 5:09 PM, Glenn Burt wrote:
>
> HI Jay,
>
> Are they saying that adding the 3rd inverter will cause a greater than 3%
> im
Hi Glenn
I had it correct in the subject, but got it wrong below, here is the correct
number
2014NEC, 705-100 (a)
> On Mar 21, 2017, at 8:09 PM, Glenn Burt wrote:
>
> Hi Jay,
> I must not understand.
> I don't see a 705.11 in the 2014 NEC.
> From: jay
> Sent:
, using SMA 3kw for phases 1 and 2)
Now they are being stopped on adding the 3rd.
Anyone ever run into this before?
Any answers?
thanks
jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email
nothing
from Tesla directly, but some from other folks by google search.
Does anyone on the list here know anything solid?
For example.
what inverter is being used?
how do they stack?
battery chemistry?
actual size ( depending on which info it changes)
are they actually shipping?
Thanks
jay
are some issues with battery life
The 375/376 FC look solid
The Seaward clamp meter
And there are a few others.
All thoughts are welcome,
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Hi Lou,
I”ve had a few customers doing this exact operation with no issues.
It has been very consistent.
jay
peltz power
> On Feb 12, 2017, at 8:12 PM, Lou Russo wrote:
>
> Aloha Wrenches,
>
> I have steered clear of the Mate 3 for as long as possible, I have burned
>
. Max watts around 300.
Yours might be different however.
jay
peltz power
> On Feb 9, 2017, at 10:29 AM, solar1onl...@charter.net wrote:
>
> Lou,
> You are getting great advice from the list. Yesterday's sinewave inverter is
> not today's sinewave inverter. The
reports etc on
this.
I should have been more specific and clear on my original email.
jay
> On Feb 5, 2017, at 3:23 AM, Dana wrote:
>
> It is at the polar opposite end of the scale from Organic. I have worn quite
> a bit in fire training and the smell alone is a strong indicat
HI All,
I am wondering if anyone has any information or knows of studies etc that
discuss any toxic nature of FR cotton clothing.?
Thanks in advance,
jay
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
, so I just want to make sure I’ve got the right tips.
thanks
jay
peltz power
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cg
Hi John,
If you are looking for something similar to the 9325 but better then.
Check out Sunpumps.
Much better pump because of the superior case, cheaper, more reliable and
easier to repair
Also Sunpumps make some really nice LCB controls.
jay
peltz power
> On Jan 15, 2017, at 2:04
Its not just the weight but the size, i.e. so small!
jay
peltz power
> On Jan 12, 2017, at 5:01 PM, Dana wrote:
>
> Bottom side bolt up. But they were 1995 Solarex remember the weight of those
> frames!
>
> -
fixes you guys come
up with or if the OEM’s change things or if the rack folks offer some added
parts to address this issue.
Jay
Peltz Power
> On Jan 11, 2017, at 10:26 AM, Ray Walters wrote:
>
> Bill;
>
> Great point, I have had the exact same trouble not being able
I can't find the link to Jeff randles new rack company?
Can someone help me out
Thx
Jay
Peltz power.
Sent from my iPhone
> On Jan 10, 2017, at 8:31 PM, Ray Walters wrote:
>
> Hi William;
>
> Your link had a glitch, I think this should be it?
> http://www.mill
y the time its told to shut down its not
running all that hard, which shouldn’t be a problem.
But again, I’ll defer to the genny experts here.
Happy new year
jay
> On Dec 30, 2016, at 1:13 AM, Hugh Piggott wrote:
>
> hi Lou,
>
> I don’t wish to contradict this version of eve
Hi Lou,
I might suggest a relay that switches with the signal for ags start/stop.
It'll disconnect the AC from the genset with a lot shorter delay.
Jay
Peltz power.
Sent from my iPhone
> On Dec 29, 2016, at 11:27 AM, Lou Russo wrote:
>
> Wrenches,
>
> I recently i
701 - 800 of 1699 matches
Mail list logo