Bibiano González, Alejandro wrote:
I want a recomendation for a good graphical (gnome) firewall that configure my iptables.
Thanks,
***
Alejandro Bibiano González
-Departamento Informática-
INDUSTRIAS LAUBAT, S.A.
Tlf +34 93 728 36 03
Fax +34 93 728 36 14
[
Rodolfo J. Paiz wrote:
At 03:11 10/5/2003, you wrote:
Anyway I'll try to make minimum with custom setup from RH8 and with
ignoring dependiences. Will see how it works.
Ignoring dependencies is not usually a good idea. A product "depends" on
another for a reason usually...
OK, I have managed
Richard Crawford wrote:
I'm running Samba 2.3x on a RH 8 box and sharing out my wife's and my
home directories so that we can access them from our Windows computers.
I use the "Map Network Drive" tool under Windows to connect my share on
the Linux box to my Windows computer as Drive Z:, so I can
Hi!
I have a cable modem connection to inet on my RH8 which is router for my
LAN. Lately I have some difficulties with the stability of my connection
so I am asking: Is it possible to log the connection of the cable modem
to the inet? I would like to log how long was modem online an how long
w
Michael Fratoni wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 05 October 2003 03:25 am, Sasa Stupar wrote:
> Did you even look at the RULE page that someone suggested to you?
> That
is exactly what RULE does: allow you to install a Red Hat Linux
system into older hardwa
Does wu-ftp support FlashFXP option and how to configure it ?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
> Did you even look at the RULE page that someone suggested to you? That
is exactly what RULE does: allow you to install a Red Hat Linux system
into older hardware, or any hardware with less memory (down to 6MB RAM
in some cases), and install a much smaller set of packages than Anaconda
usually
Martin Mewes wrote:
Howdy,
Am Sam, den 04.10.2003 schrieb Sasa Stupar um 19:05:
I have noticed lately that I have some files with name core.x where
is a different number at each file. They are all 2 megs and they
are all in the / directory. Running RH8.
Any idea?
Seems to me, that
L. K. Pierce wrote:
On Fri, 2003-10-03 at 11:17, R Sánchez wrote:
Wasn't there some type of distro proyect that was precisely a RedHat
adaptation for minimal systems?
Yes, it's called RULE. http://www.rule-project.org
Yes, that's nice but I would like that guys from Redhat make a minimal
insta
Hi!
I have noticed lately that I have some files with name core.x where
is a different number at each file. They are all 2 megs and they
are all in the / directory. Running RH8.
Any idea?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mail
Hi!
I am thinking of making a fresh install of RH8 with minimal option (476
megs). Then I myself to compile and install PHP, Apache2, Squid, Samba,
Wu-ftp.
The question is if I will be able to compile all this with the software
which is allready installed with this minimal instalation or I will
James D. Parra wrote:
Hello,
How do I set the directory/file permissions to 'read only' for website
viewers?
I am getting a, "You don't have permission to access / on this server,"
error when I try to view this page.
Thank you,
James
where is your root directory? this should be readable by use
Michael Gargiullo wrote:
Hey all,
I'm looking for an ISP class email package. I need to host about 130
domains with several thousand users. I'd love to find one where we can
designate one user per domain to handle user creation via a web
interface.
Anyone have any ideas? Right now w
Salvador Santander wrote:
Hello, list. I have just finished a redhat installation and i can't do ftp
in my own linux machine. Any idea for solve this problem or any document of
wu-ftpd configuration? Thanks.
Is your ftp service running?
To configure wu-ftp I suggest to use Webmin ( http://www.web
[EMAIL PROTECTED] wrote:
Hi,
I need to setup IP routing and a Firewall very quickly on LINUX.
Unfortunately I've never done this before on LINUX. Does anybody have any
really simple instructions or can they offer any advice.
My internal network (corporate LAN) is on the 10.1.30.x to 10.1.32.x ra
Hi!
I would like to run a SOCKS server on my RH8 machine. Is there some
software in the distribution or do I need another one-please suggest one?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Looks like you have only clients installed on your system. So go and
download wu-ftpd and install it. To configure it use Webmin (
http://www.webmin.com ).
Be carefull with configuration. If you have questions about it you know
where we are.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
You still haven't told which ftp program. Is it WU-ftp or Proftpd or
something else?
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Justin Rush wrote:
Where are the rpm sources installed to, for example when I install the
httpd rpm source?
/usr/src/redhat/...
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi!
What is the command line to delete all files under certain directory?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi!
I am running on RH8. I have problem to start apache with a startup
script "/etc/init.d/httpd start". I get back an error :
-
Starting httpd: execvp: No such file or directory
-
But I can start it directly with "/usr/sbin/httpd -k start" without any
problem.
Any idea?
Sasa
Hi!
I have created a self sign digital certificate which I want to use for
signing my email messages. The problem is that when another person
receive my email it shows that this certificate is not trusted. How do I
make it to be trusted?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EM
Harish pravi:
Hi All,
I was jist going thru the Redhat Howtos for a building a caching name
server on my LAN which has 50 nodes connected to the Internet thru a
Linux Box, in the howtos they have mentioned about making a file
/var/named/root.hints and which has the lists of all the root
server
Ed Wilts pravi:
On Tue, Sep 23, 2003 at 10:09:51AM +0200, Sasa Stupar wrote:
Ed Wilts pravi:
Following up my post, it appears like the sendmail rpm update got me.
The easy fix:
# service MailScanner status
You'll see that it's not running properly
# service MailSc
Noah pravi:
redhat 8.0 machine
DOH! any clues on this?
# /usr/sbin/up2date -u
There was an SSL error: [('SSL routines', 'SSL3_GET_SERVER_CERTIFICATE', 'certif
icate verify failed')]
here is my configuration:
# up2date --configure
0. debug No
1. isatty Yes
2. depslis
Ed Wilts pravi:
On Mon, Sep 22, 2003 at 02:55:52PM -0500, Ed Wilts wrote:
On Mon, Sep 22, 2003 at 02:07:12PM -0500, Benjamin J. Weiss wrote:
I'm still trying to find the time to figured out why neither f-prot nor
MailScanner is catching these. They've caught other stuff but not this
one.
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:31:41 CEST
Til: [EMAIL PROTECTED]
Emne: Re: Sv: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:17:50 CEST
Til: [EMA
Jason Staudenmayer pravi:
I'm not picking them off either. Qmail+qmail-scanner-1.20rc3+clamav
They just get blocked due to the extension and not because they're virii??
When I scan the quarantine dir nothing comes up with either clamscan or
pavcl.
-Original Message-
From: Gerry Doris [mail
Benjamin J. Weiss pravi:
I have updater running every hour...you are lucky, you still didn't
receive these strange messages which are not detected by any av program.
What are the subject lines? I'm curious if we're talking about the same
email
Ben
we are talking about mail th
Benjamin J. Weiss pravi:
Are you guys updating your f-prot virus signatures? My f-prot is
catching
all of this stuff. My dates are:
[EMAIL PROTECTED] log]# f-prot -verno
F-PROT ANTIVIRUS
Program version: 4.2.1
Engine version: 3.13.4
VIRUS SIGNATURE FILES
SIGN.DEF created 18 Septem
Benjamin J. Weiss pravi:
I have been adding rules to sendmail all day yesterday and today
blocking the spam...
I'm still trying to find the time to figured out why neither f-prot nor
MailScanner is catching these. They've caught other stuff but not this
one. The attachement has a .exe e
Ed Wilts pravi:
On Mon, Sep 22, 2003 at 09:25:53AM -0700, Simran Hansrai wrote:
I have been adding rules to sendmail all day yesterday and today
blocking the spam...
I'm still trying to find the time to figured out why neither f-prot nor
MailScanner is catching these. They've caught othe
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:17:50 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 11:04:00 CEST
Til: [EMAIL PRO
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 11:04:00 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Edward Dekkers <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 09:39:43 CEST
Til: [EMA
[EMAIL PROTECTED] pravi:
Fra: Edward Dekkers <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 09:39:43 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] wrote:
Hi
I have a little problem with the NIC (I think) which consists of it stops responding from time to
Jianping Zhu pravi:
On Wed, Sep 17, 2003 at 10:26:05AM -0500, MKlinke wrote:
On Wednesday 17 September 2003 14:04, Jianping Zhu wrote:
On Mon, Sep 15, 2003 at 04:45:34PM -0700, Rhugga wrote:
Jianping Zhu wrote:
I have a windows xp which has 120GB HDD. I have a redhat7.1
mac
[EMAIL PROTECTED] pravi:
Hi all,
My hda crash today.
During the night it started do echo error in messages and now crash. Does
anybody know an utility to check hard disk and ignore bad blocks?
hda: MAXTOR 6L020J1, ATA DISK drive
Sep 16 04:02:06 pc08spt kernel: hda: dma_intr: status=0x51 { Driv
Chris V pravi:
Hi Stephen,
As I am new in Linux... could you be more specific where I should look
for this? Which files controls what which service runs and which does
not? And what about the http requests that are also denied?
rgrds
Chris
At 03:56 PM 16/09/2003, you wrote:
On Tue, 2003-09-16
Jack Bowling pravi:
** Reply to message from Sasa Stupar <[EMAIL PROTECTED]> on Tue, 16 Sep
2003 07:44:24 +0200
Ed Wilts pravi:
On Mon, Sep 15, 2003 at 08:03:03PM +0200, Sasa Stupar wrote:
I have a question regarding the configuration of wu-ftp: I have it
working for gue
Ed Wilts pravi:
On Mon, Sep 15, 2003 at 08:03:03PM +0200, Sasa Stupar wrote:
I have a question regarding the configuration of wu-ftp: I have it
working for guest and anonymous (I don't want to enable real unix). How
do I set up default permissions for upload (eg. 755) for guest? Now i
Hi!
I have a question regarding the configuration of wu-ftp: I have it
working for guest and anonymous (I don't want to enable real unix). How
do I set up default permissions for upload (eg. 755) for guest? Now it
is set to 022.
Thanks in advance.
Sasa
--
redhat-list mailing list
unsubscribe
D'Arque Bishop pravi:
Hey there,
On Mon, Sep 15, 2003 at 09:24:04AM -0500, Nurullah Akkaya wrote:
i am planning on buying a new mother board but how can i find out if
it is going to cause me any problems or not?
board i am planning to buy is
Asus A7N266-VM AA (AMD Assured Version) NVIDIA nFORC
Hi!
I have a strange problem. When I request at my terminal under gnome
desktop "$ man ftpaccess" the terminal crashes. This happens only for
this demand. I can wiev all others manuals axcept this one.
By the way error looks like this:
--
Application "gnome-terminal" process (x)
David Hart pravi:
Any suggestions for RH9 - Apache? Small user group. Security is
important as well as threaded discussions.
There are just so many open source solutions to discussion webs.
Thanks!
If you mean a FORUM then look at the http://www.invisionboard.com
--
redhat-list mailing list
u
Ed Wilts pravi:
On Thu, Sep 11, 2003 at 02:40:55PM +0200, Sasa Stupar wrote:
Ed Wilts pravi:
On Thu, Sep 11, 2003 at 07:49:54AM +0200, Sasa Stupar wrote:
I have problem with configuration of wu-ftp. I am using webmin for that
purpose. The problem is that when I connect as unix
Ed Wilts pravi:
On Thu, Sep 11, 2003 at 07:49:54AM +0200, Sasa Stupar wrote:
I have problem with configuration of wu-ftp. I am using webmin for that
purpose. The problem is that when I connect as unix user I get displayed
my home dir but I am able to go out of my home dir which is not good
Romeo pravi:
Sorry i'm quite new to the list.
I'd like to know if is sure that is not a configuration error the
message I get when I try to do an up2date:
There was an SSL error: [('SSL routines',
'SSL3_GET_SERVER_CERTIFICATE', 'certificate verify failed')]
I red it was a redhat problem, but I
Hi!
I have problem with configuration of wu-ftp. I am using webmin for that
purpose. The problem is that when I connect as unix user I get displayed
my home dir but I am able to go out of my home dir which is not good.
For the anonymous ftp everything is ok - anonymous users can't leave the
ho
Hi!
I am going to install RH8 and I have one question:
Is it possible to define during the setup somehow to use ext3 filesystem
with data writeback mode because by default this is set to ordered mode?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/m
Sean Estabrooks pravi:
On Sat, 06 Sep 2003 22:30:57 +0200
Sasa Stupar <[EMAIL PROTECTED]> wrote:
Remember you can always check for yourself; what does
"man tune2fs" tell you is correct? Is your filesystem actually
ext3 ? Are you using the correct partition in place of the
/
Bret Hughes pravi:
On Sat, 2003-09-06 at 14:44, Sean Estabrooks wrote:
On Sat, 6 Sep 2003 12:34:35 -0700 (PDT)
Anthony Liu <[EMAIL PROTECTED]> wrote:
You know, if we keep pushing the backspace key from
the command line when there is nothing for your to
erase, you will hear the annoying bee
Sean Estabrooks pravi:
On Sat, 06 Sep 2003 12:37:34 +0200
Sasa Stupar <[EMAIL PROTECTED]> wrote:
tune2fs -o journal_data_writeback /dev/hda2
Again i think the modular kernel will get in the way of
using this but you can play around with it.
I have tried with the command you gave
Sean Estabrooks pravi:
On Thu, 04 Sep 2003 19:35:42 +0200
Sasa Stupar <[EMAIL PROTECTED]> wrote:
Hi!
I have been trying all day to change ext3 mode from ORDERED to WRITEBACK
and so far no success. Let me say what I have been trying:
-adding a parameter to /etc/fstab data=writeback n
Sean Estabrooks pravi:
On Thu, 04 Sep 2003 11:41:13 +0200
Sasa Stupar <[EMAIL PROTECTED]> wrote:
Hi,
I have currently installed RH8 with ext3 fs. I have read that the
default settings for that fs is data=ordered. I would like to change it
to data=writeback. How do I do that?
Hi!
I have been trying all day to change ext3 mode from ORDERED to WRITEBACK
and so far no success. Let me say what I have been trying:
-adding a parameter to /etc/fstab data=writeback next to the defaults
for the root and /boot partition eg.
LABEL=// ext3defaults,da
ly
useless.
-Original Message-
From: [EMAIL PROTECTED] [mailto:redhat-list-
[EMAIL PROTECTED] On Behalf Of Sasa Stupar
Sent: Thursday, September 04, 2003 6:25 AM
To: [EMAIL PROTECTED]
Subject: Re: Two OS - boot?
Cowles, Steve pravi:
Sasa Stupar wrote:
The thing is that I still want to be able to b
Cowles, Steve pravi:
Sasa Stupar wrote:
The thing is that I still want to be able to boot any of the systems
independently. This means I want to leave intact the MBR of each disk.
I use a slightly different approach to dual booting. Maybe it will work for
you.
I have linux installed on one hard
Bjørn-Sverrre Nøttum pravi:
Hallo!
I have just installed RadHat 9 server and I am trying to register the
system with rhn network. When I write rhn_register in text- mode I get
the following error message:
"There was an SSL error: [('SSL routines' , SSL3_GET_SERVER_CERTIFICATE'
, 'certificat ve
Otto Haliburton pravi:
Use GRUB. Read the grub manual on how to install. The general rule is
install after winxp is installed. You can get the manual at gnu.org.
-Original Message-
From: [EMAIL PROTECTED] [mailto:redhat-list-
[EMAIL PROTECTED] On Behalf Of ÍõÖÙ¿¡
Sent: Thursday, Septemb
Hi,
I have currently installed RH8 with ext3 fs. I have read that the
default settings for that fs is data=ordered. I would like to change it
to data=writeback. How do I do that?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redha
Hi folks,
I have two OS, winxp and RH8, both on separated drives and also both
with their own MBR installed. What I want to do is to create a boot
script to ask me what OS do I want to boot. Now I am using by default in
bios to search for floppy boot(linux) and if there is nothing then boot
fr
Alfredo Cole wrote:
El Miércoles, 3 de Septiembre de 2003 07:37, Sasa Stupar escribió:
HI!
How do I access to the IOMEGA ZIP drive which is connected to the
parallel port on RH8?
Sasa
I think it's:
modeprobe imm
mount /dev/sda4 /mnt
Regards.
It doesn't work. It tells me command no
I am on RH8:
I want to access to my second HDD but there is windowsxp installed. How
do I mount it?
How do I make a floppy bootdisk ?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
HI!
How do I access to the IOMEGA ZIP drive which is connected to the
parallel port on RH8?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Hi!
I have RH8 installed and have setup as a router for my LAN. Now I would
like to specify how much bandwidht can each of users use. Is this
possible and how can I do that?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-lis
Try Firestarter at http://firestarter.sourceforge.net
Very easy to setup in GUI.
funtom wrote:
Hi,
I work with http://www.fwbuilder.org/ and iptables.
fwbuilder is running on a internal node to build the rules and i do the
upload for a new police over ssh to the firewall.
regards,
thomas
- Ori
fred smith pravi:
On Mon, Sep 01, 2003 at 09:29:35AM -0500, Robert C. Paulsen Jr. wrote:
On Mon, Sep 01, 2003 at 04:11:02PM +0200, Sasa Stupar wrote:
Hi!
I have setup a server (RH8) with Samba for printer share. With windows
machines I can access printer and print without any problem
Hi!
I have setup a server (RH8) with Samba for printer share. With windows
machines I can access printer and print without any problem.
But from the linux clients (all are RH8) I can't print nothing. I have
set up a printer thru gnome and choose UNIX printer (not local).
Did I make some configur
Hi!
I have made a new install of RH8 and make udpate for up2date succesfully
but when I try to register after the first window I get an error "method
not allowed while retrieving privacy statements".
What is wrong?
Sasa
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://w
[EMAIL PROTECTED] pravi:
It's not the definitive app for dummies but it's close :-).
http://www.mondorescue.org/
Atentamente,
Pedro
S
[EMAIL PROTECTED] pravi:
Hi,
The easiest way to copy all the hard disk.
If you have another hard disk with the same geometry ... install it mount
the new hard disk as /dev/hdb (or hdc or hdd) and do:
dd if=/dev/hda of=/dev/hdb
if=input file, of=output file
it will copy all the filesystems and d
Mike McMullen pravi:
Hi all,
I went through the archives for yesterday and saw the mention of
relays.osirusoft.com rejecting tons of sites. I use relays.osirusoft.com
in my sendmail.mc file:
FEATURE(`dnsbl', `relays.osirusoft.com')dnl
After watching the logs early this morning I can see that i
Hi!
I have for a while installed redhat 8.0. Now I am experiencing some
problems with my hard disk so what I want to do is to copy entire hard
disk to a new one. I don't want to reinstall the system from scratch.
How can I do that ? It is an EIDE HDD.
Sasa
--
redhat-list mailing list
unsubscr
73 matches
Mail list logo
