Re: [weewx-user] Davis Vantage Pro2 and WU - best settings

I have soil_leaf module (ID=2), temp proble is the only one attached to the module and it is in slot 1. The console is configured to get data from ID=2 and module is set to the leaf_soil. That is all on the physical side. When I press temp button on the console I see temp with no1. Goig ba

Re: [weewx-user] Davis Vantage Pro2 and WU - best settings

have you checked the soil temperature probe is in the correct slot? It appears to be being read as a leaf temperature probe and not a soil temperature probe. On Monday, 31 October 2016 08:31:06 UTC+2, Jacek Skowroński wrote: > > Yes i have only sensor for temperature > I have No humidity sensor

[weewx-user] Re: $station.uptime should not reset to Zero when weewx is only doing a reload

Hi, I wouldn't go so far as to say this is expected behaviour (well it is expected in as much as the code is doing what it ought to), but if you think a little about wee_reports I think the result is logical. wee_reports is a standalone utility that runs a weewx report cycle as per the [StdRep

Re: [weewx-user] Davis Vantage Pro2 and WU - best settings

Yes i have only sensor for temperature I have No humidity sensor now Can we somohow force wu to see this data? Nowhere i told i have other sensors W dniu poniedziałek, 31 października 2016 Thomas Keffer napisał(a): > Hello, Jacek, > > You said you have soil temperature and humidity sensors, but

[weewx-user] Re: Interceptor using bridge new Accurate firmware

i use tcpdump with the script On Sunday, October 30, 2016 at 11:25:29 PM UTC-5, Brad Tucker wrote: > > Im on GitHub now looking at the code for 1.46, Thanks for the perl script > as well. I will def give this a shot in the morning. > -B > > On Sunday, October 30, 2016 at 9:23:19 PM UTC-7, Radar w

[weewx-user] Re: Interceptor using bridge new Accurate firmware

Im on GitHub now looking at the code for 1.46, Thanks for the perl script as well. I will def give this a shot in the morning. -B On Sunday, October 30, 2016 at 9:23:19 PM UTC-7, Radar wrote: > > sorry it is tcpflow 1.4.6 > > On Sunday, October 30, 2016 at 11:18:18 PM UTC-5, Radar wrote: >> >> he

[weewx-user] Re: sdr.py

Fantastic. Thanks! Brad On Sunday, October 30, 2016 at 8:56:04 AM UTC-7, Brad Tucker wrote: > > Trying to install weewx. I have installed rtlsdr rtl433 along with weewx. > > I have tested rtf-433 by issuing rtl-433 -G and get lots of data passed > back. > > Once I try and use the actual sdr.py dr

[weewx-user] Re: Interceptor using bridge new Accurate firmware

sorry it is tcpflow 1.4.6 On Sunday, October 30, 2016 at 11:18:18 PM UTC-5, Radar wrote: > > here is the one i used to play with interceptor driver > > On Sunday, October 30, 2016 at 11:09:01 PM UTC-5, Brad Tucker wrote: >> >> Ha! Of course the most important part ;) I have 1.44 but I'll dig for t

[weewx-user] Re: Interceptor using bridge new Accurate firmware

here is the one i used to play with interceptor driver On Sunday, October 30, 2016 at 11:09:01 PM UTC-5, Brad Tucker wrote: > > Ha! Of course the most important part ;) I have 1.44 but I'll dig for the > source and see what I can find. > > Thanks for the help! > Brad > > -- You received this me

[weewx-user] Re: sdr.py

On Sunday, October 30, 2016 at 11:56:04 AM UTC-4, Brad Tucker wrote: > > Once I try and use the actual sdr.py driver directly using the command: > sudo PYTHONPATH=bin python bin/user/sdr.py > > I get this: > Traceback (most recent call last): > File "bin/user/sdr.py", line 699, in > [--path=

[weewx-user] Re: Interceptor using bridge new Accurate firmware

Ha! Of course the most important part ;) I have 1.44 but I'll dig for the source and see what I can find. Thanks for the help! Brad -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it,

[weewx-user] Re: Interceptor using bridge new Accurate firmware

it puts it on one line i had to download version 1.4.4 its not yet in fedora rpm so had to compile from source i'm looking for the script i used when i was playing with interceptor driver can't remember it's name or where i left it :) On Sunday, October 30, 2016 at 10:59:23 PM UTC-5, Brad Tucker

[weewx-user] Re: Adding/Removing Values to MQTT extension

On Sunday, October 30, 2016 at 8:41:57 PM UTC-4, jmltech wrote: > > I'm using Matthew Wall's nice MQTT extension for weewx. Where can I > specify which weewx variables to add to the MQTT stream, and remove some > others that are not needed for my purpose? I thought it would be a skin, > but di

[weewx-user] Re: Interceptor using bridge new Accurate firmware

If only it was that easy. I'm not a coder and I haven't touched perl in a good 20years... on your tcpflow you have -0 in the syntax. My version on the pi doesn't understand -0. What should the -0 do? Thanks, B -- You received this message because you are subscribed to the Google Groups "weewx

[weewx-user] Re: Interceptor Driver Acurite Bridge

Any luck with this? I'm having a similar issue. I too am having the nc issue. Thanks, Brad -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@

[weewx-user] Re: Interceptor using bridge new Accurate firmware

the perl script is not part of weewx i made it long time ago i don't have it for download (it's real messy) it does a little more than just feed weewx it prints to the console too you should be able to write one to suit you don't know about nc On Sunday, October 30, 2016 at 10:31:53 PM UTC-5, Bra

[weewx-user] Re: $station.uptime should not reset to Zero when weewx is only doing a reload

I've seen this again since I posted, but this time I paid more attention. It only happens if you use wee_reports to get a fast update. 'systemctl reload weewx' doesn't alter the time displayed but wee_reports generates an uptime of 0. After the next normal iteration of weewx update generation t

[weewx-user] Re: Interceptor using bridge new Accurate firmware

Thanks for the reply Radar. Is your perlscript available for download or is it currently part of the weewx pacakage and I'm missing it? I'll give tcpflow a shot as well. Any idea why nc only stays alive for a short period? Thanks! Brad -- You received this message because you are subscribed t

[weewx-user] Re: Interceptor using bridge new Accurate firmware

i use a perl script to put the obs on one line then feed it to weewx if you have tcpflow 1.4.4 you can try tcpflow -C -p -0 -i eth0 On Sunday, October 30, 2016 at 10:01:59 PM UTC-5, Brad Tucker wrote: > > I have setup a bridge running raspberry pi. It is connected as follows: > > Acurite Bridge

[weewx-user] Steel Series gauges - cant alter chart popup size

I am using the SteelSeries gauges in weewx 3.4.0 (I know, I need to upgrade weewx and i will shortly) In weewx/skins/ss/skin.conf I changed the image height and width and restarted weewx but don't see any chart popup size changes. Altering the colors of x and y axis labels works ok but the image

[weewx-user] Interceptor using bridge new Accurate firmware

I have setup a bridge running raspberry pi. It is connected as follows: Acurite Bridge -> RaspberyPi WeeWX Bridge -> Internet Connection It is passing packets through the bridge. The bridge has been updating myaccurite & weather underground for hours and all is well with it. I am having problem

Re: [weewx-user] Noob question... where to find the actual data (temp) within weewx?

Jim, Did you check the Customizing Guide ? It has an abundance of information about how to access the data. As Andrew suggests, the easiest is to specify that the report generator create another (tiny) file, with just a single tag $current.outTemp. On every r

Re: [weewx-user] Re: Davis Vantage Pro2 and WU - best settings

Hello, Jacek, You said you have soil temperature and humidity sensors, but it appears that you actually have soil and *leaf temperature* sensors. That is, you have values for soilTemp1 and leafTemp1, but nothing for soilMoist1. Or, perhaps the sensors are plugged into the wrong probe slot? You sh

[weewx-user] Adding/Removing Values to MQTT extension

I'm using Matthew Wall's nice MQTT extension for weewx. Where can I specify which weewx variables to add to the MQTT stream, and remove some others that are not needed for my purpose? I thought it would be a skin, but didn't find anything. Thanks Joe -- You received this message because you

[weewx-user] Re: Noob question... where to find the actual data (temp) within weewx?

1) If you have another program wanting the temperature you can read it from the archive table in the database or 2) Create a template called temp.txt.tmpl containing $current.outTemp - and have cheetah create a file called temp.txt every archive interval which you can then read into your other

[weewx-user] Re: Noob question... where to find the actual data (temp) within weewx?

Ok... Maybe if I ask the question in a more clear form... Can someone explain how I can pass the current outdoor temp to a variable so I can us it in another program? On Saturday, October 29, 2016 at 4:50:59 PM UTC-4, Jim W. wrote: > > I have very little Linux (or other programming) experienc

[weewx-user] Re: Attempting to use a Pete Bros. Ultimeter2100 on a RPi3 with a serial to usb converter

I'll second that, great support from users and developers! This is the third weewx station I have cobbled together - one with a wireless Oregon Scientific, one with one-wire, and now this one with Pete Bros. - Plus two more carefully monitoring my basement as I test and experiment. The Rpi pr

Re: [weewx-user] How to use humidex, apparent temperature, evapotranspiration, cloud base and maximum solar radiation?

Thank you very very much All seems ok now. H.frelat -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, vi

[weewx-user] Re: Davis Vantage Pro2 and WU - best settings

some logs REC:2016-10-30 17:30:00 CET (1477845000) altimeter: 30.2914897657, appTemp: 42.5550178172, barometer: 30.332, cloudbase: 2354.14897393, consBatteryVoltage: 1.68, dateTime: 1477845000, dewpoint: 38.9625445147, ET: 0.0, extraHumid1: None, extraHumid2: None, extraTemp1: None, extraTe

[weewx-user] sdr.py

Trying to install weewx. I have installed rtlsdr rtl433 along with weewx. I have tested rtf-433 by issuing rtl-433 -G and get lots of data passed back. Once I try and use the actual sdr.py driver directly using the command: sudo PYTHONPATH=bin python bin/user/sdr.py I get this: Traceback (most

Re: [weewx-user] Re: Davis Vantage Pro2 and WU - best settings

so how there are davis stations with those data visible? Maybe they are using some different meteo soft like weatherdisplay or cumulus? Or maybe they are using some tricks in the setup on the davis and weewx. Any hints for me? Regards Jacek On Sunday, October 30, 2016 at 2:54:27 PM UTC+1, Tom Kef

[weewx-user] Re: Davis Vantage Pro2 and WU - best settings

I'm transferring both modes, I had stopped weewx and run weewd so from its output I know taht there is soiltemp1 and has value 46. other has none. I did for fe minutes and output was similiar. Is it debug? Or it's something different? On Sunday, October 30, 2016 at 10:21:19 AM UTC+1, Andrew Milne

Re: [weewx-user] Re: Davis Vantage Pro2 and WU - best settings

It would not surprise me that the WU is not archiving soil temperature and moisture. They are not very common and I doubt they would want to dedicate columns in their database schema to them. I have an extra temperature sensor ('extraTemp1'), which the WU reports as "soil moisture." I don't know w

[weewx-user] Re: Please can I have my bug back?

On Sunday, October 30, 2016 at 4:47:57 AM UTC-4, Macha wrote: > > In fact, the original "lockouts" weren't coincident with weewx's reporting > and seemed pretty random (and infrequent). I still suspect that the whole > issue had something to do with the fact that this "original" machine stores >

Re: [weewx-user] Convert 60 seconds to 5 minute database

I don't think you can achieve this in a single select statement, but it would be a very simple program. It is easy enough to get the first 5 records, or the records within 5 minutes of the first, from a single select - the hard part is to keep iterating through the database without having a 'c

[weewx-user] Re: Davis Vantage Pro2 and WU - best settings

Tom expressed doubts as to whether WU displayed soil temps on rapid fire - and you appear to be using rapid fire. Have you tried uploading normal archive records instead of rapid firing?? Did you run with debug set, as Tom suggested, and confirm that the REC and LOOP contain the soil temperatu

Re: [weewx-user] Convert 60 seconds to 5 minute database

Someone can help me to do the correct select statement from database to mediate 5 entries to one and preserve max and min loop values? Many thanks -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving

[weewx-user] Re: Please can I have my bug back?

No I didn't. In fact I didn't play around with nice levels etc. The "original" RPi is a Pi 2 (more by accident than intention, but it should have enough "welly") - it now runs just weewx and a single camera and its CPU utilisation is very low. In fact, the original "lockouts" weren't coinciden

[weewx-user] Re: Davis Vantage Pro2 and WU - best settings

I had changed the probe slot for 1, and now I have soilTemp1: 46.0, but on the WU page something is strange. I get C close to the soil temp, but there is no value. https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56#history On Saturday, October 29, 2016 at 9:49:27 PM UT

[weewx-user] Re: Please can I have my bug back?

when you had cams and weewx on one machine did you have turbo mode enabled? It would have needed it I expect. weewx will have failed because the camera were hogging resources - you could have tried raising the priority. weewx will trundle along at very low cpu usage UNTIL it generates reports

[weewx-user] Re: Please can I have my bug back?

OK, status report on my "lockout" with weewx and my FOUSB station. I moved 2 webcams from the RPi running weewx onto a different machine (another RPi, I have quite a few). Result? No weewx lockouts for nearly 10 days. I'm not sure if this passes the "5 sigma" test, but it's certainly a record u