cisco 1601's [7:52780]
Hi Friends, My CCNA is over, and Iam preparing for CCNP now. Iam interested buy 2 1601 router's with transceivers, console cables, back to back cables I cannot afford anything grand than this right now. (my dream is a couple of 3600's). Iam located in India. Thanks in advance. Arun Menon Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52780t=52780 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDP pointers [7:52812]
Hi, passed all four for CCNP, in past 4 weeks, I must thank this groups, and some of the discussios, and helpful information... with a weeks rest, like to go in for CCDP, I already have the exam certification guide , from Cisco Press, does any body have pointers in Cisco web site...for the study material...(Searching on dialup) I would also like to get some feedback, on the CCIP trach, specially on the Multicast, which are the good books to buy ??? Thanks [GroupStudy.com removed an attachment of type image/gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52812t=52812 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISIS study Material. [7:52628]
Hi, I am preparing for the BSCI exam, but could nopt get any good material on the ISIS does anybody have any pointer in the CISCO site, which can provide a comprehensive material ... Thanks [GroupStudy.com removed an attachment of type image/gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52628t=52628 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Books for the CCNP Routing Exam [7:52094]
Hi, I need some recommenendation on good Study material for the rouoting Exam, CCNP , have cleared rest of the three using Cisco-Press Certification books for the routing i have a older book Cisco-press. with the change of the exams, i was not sure..if the same books would be helpful..It is for version 2.0 2001 edition Arun [GroupStudy.com removed an attachment of type image/gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=52094t=52094 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Remote Access [7:51306]
Hi, I would be taking Remote access shortly, as per cisco web-site the exam number has changed, has there been any changes in the contents, or is exam being focused on specifc areas,, like what was done to Switching exam it had more questions on multicast... and offcourse newer switching platforms were referred !!! AD [GroupStudy.com removed an attachment of type image/gif] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=51306t=51306 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: DRAM and FLASH question [7:35600]
Check this http://www.anthonypanda.com for memory and cables. --- Ozzie Sutcliffe wrote: talk to Brad oz [EMAIL PROTECTED] = Arun Upadhyay CCIE (written passed ) MCSE,CCNA, CNA __ Do You Yahoo!? Yahoo! Sports - Coverage of the 2002 Olympic Games http://sports.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35997t=35600 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCBOOTCAMP lab question [7:19175]
Thanks Brad. --- Brad Ellis wrote: Arun, Hi! The older labs still do include some topics not covered on the current CCIE exam. Therefore, you could just NOT do the configs for those topics when you do the earlier practice labs. It should be pretty easy to skip the topics not covered by the CCIE exam now. If you purchase them and need assistance getting around those topics, I'd be more than happy to help. The new labs (labs 15+) do take into account the changes that were implemented in the CCIE tested technologies. The newer labs also cover VoIP, ATM, and IPSEC. Since ccbootcamp.com is constantly adding labs to the subscription (currently at 20 labs), the new labs will always reflect any announced changes in the CCIE program (as well as the virtual racks). In my personal opinion, they are the best labs on the market (I thought they were so good, I now own part of the company!!). Without using them, I dont think I would have gotten my CCIE #! thanks, -Brad Ellis CCIE#5796 Network Learning Inc [EMAIL PROTECTED] used Cisco: www.optsys.net Arun Upadhyay wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Group I have subscribe ccbootcamp practice labs for for my CCIE lab preparation. But their labs still has VINES, DECNET, APPLETALK, ATM LANE...Which are not part of CCIE lab any more. Can somebody suggest me who did or doing these labs that how should I attemp those particular labs which has these topics for configuration. Thanks. Arun __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ [EMAIL PROTECTED] ===== Arun Upadhyay CCIE (written passed ) MCSE,CCNA, CNA __ Terrorist Attacks on U.S. - How can you help? Donate cash, emergency relief information http://dailynews.yahoo.com/fc/US/Emergency_Information/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=20183t=19175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCBOOTCAMP lab question [7:19175]
Hi Group I have subscribe ccbootcamp practice labs for for my CCIE lab preparation. But their labs still has VINES, DECNET, APPLETALK, ATM LANE...Which are not part of CCIE lab any more. Can somebody suggest me who did or doing these labs that how should I attemp those particular labs which has these topics for configuration. Thanks. Arun __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=19175t=19175 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame relay switch question [7:18318]
Hi Group I want to configure frame relay switch. Here is the thing I want to do: I have three routers ( say R1, R2 and R3 )and two serial cross over cable that has dte and dce interfaces. I want to configure router R3 as frame relay switch . The DTE interfaces of cables I want to connect to Router R3 and DCE interfaces to Router R1 and R2. R1---R3-R2 ( dce) (DTE) (DTE) (DCE) Can somebody please tell me , HOW can I configure this ? Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email alerts NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=18318t=18318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Frame relay switch question [7:18318]
Hi Phil That link does not have any examples like this. All these examples assuming dce interface. I know switch configuration if it has dce interface. But I don't how to do it if it has dte interface like the one had written. Can you please write the configuration for Switch , let's say R1 is using DLCI 103 and R2 is using 203. Thanks. Arun --- Circusnuts wrote: Arun- your just a handful of commands away. Have you researched this ??? The field of commands you are looking for is Frame-Relay Switching, which makes your router into a layer 2 device. http://www.cisco.com/warp/public/125/12.html Let us know if you get stuck... All the best !!! Phil - Original Message - From: Arun Upadhyay To: Sent: Monday, September 03, 2001 11:43 AM Subject: Frame relay switch question [7:18318] Hi Group I want to configure frame relay switch. Here is the thing I want to do: I have three routers ( say R1, R2 and R3 )and two serial cross over cable that has dte and dce interfaces. I want to configure router R3 as frame relay switch . The DTE interfaces of cables I want to connect to Router R3 and DCE interfaces to Router R1 and R2. R1---R3-R2 ( dce) (DTE) (DTE) (DCE) Can somebody please tell me , HOW can I configure this ? Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email alerts NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com [EMAIL PROTECTED] = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email alerts NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=18321t=18318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CHALLENGE PROBLEM (was Re: For FR Grus.... [7:16635]) [7:16719]
If the clients are on different layer 3 network, then that should be configured as point to point network. If they are on same network then they can use point to multipoint. I think in the given senerio, it should be configured as point to point network. Arun --- Brian wrote: No one has gotten this problem yet. Remeber, making it so the clients are on differnt layer 3 networks works, but when they are on the same it doesn't. What mechanics are involved in how the packet will be treated different if on the same network vs. different networks. I'll still leave the answer open, someone will get this. Brian On Tue, 21 Aug 2001, Wayne Wenthin wrote: To me this looks very similar to bridging with DSL. Since you cannot receive the ARP the router must proxy this. At 09:52 AM 8/21/2001, McCallum, Robert wrote: you can correct me here if I am wrong but split horizon is only used in distance vector protocols NO??? The problem here without giving the answer is that a router is expected to pass a packet out of an interface which is on its own subnet !! Doesn't compute! What is the routing protocol being used to route ip?? This is where the answer will lye -Original Message- From: Donald B Johnson jr [mailto:[EMAIL PROTECTED]] Sent: 21 August 2001 17:06 To: [EMAIL PROTECTED] Subject: Re: CHALLENGE PROBLEM (was Re: For FR Grus [7:16635]) [7:16681] I don't think bridge will work on this network because of split horizon. - Original Message - From: Brian To: Sent: Tuesday, August 21, 2001 7:51 AM Subject: CHALLENGE PROBLEM (was Re: For FR Grus [7:16635]) [7:16659] On Tue, 21 Aug 2001, Cisco Lover wrote: Hi Guys.. Come with some New Queston.. hmm, ok, so your looking for some challenging questions? Ok, I will post one, its got FR in it. First I'll post the problem, followed by the config: THE PROBLEM === Users on DLCI's 200, 224, 201, 225 cannot communicate to eachother. They can talk just fine to the rest of the network, but no packets can pass between them. Later discovery reveals that so long as they are on different layer 3 network addressing, communcation can occur, but if they are on the same network, such as 192.168.3.0, then they cannot communicate What is the problem? I will reply to let everyone know who got the correct answer. Below is the configuration: ! version 11.3 ! interface Ethernet2/0 ip address 192.168.1.242 255.255.255.0 ! interface Serial4/0 no ip address encapsulation frame-relay IETF keepalive 15 frame-relay map bridge 200 broadcast IETF frame-relay map bridge 224 broadcast IETF frame-relay map bridge 201 broadcast IETF frame-relay map bridge 225 broadcast IETF frame-relay lmi-type ansi bridge-group 1 ! interface BVI1 ip address 192.168.3.242 255.255.255.0 secondary ip address 192.168.2.242 255.255.255.0 ! router igrp 1 network 192.1.0.0 network 192.2.0.0 network 193.3.0.0 ! ip classless ! bridge irb bridge 1 protocol ieee bridge 1 route ip ! For eg, our FR switch is setup for Full mesh,But out network is setup as Hub Spoke FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- I'm buying / selling used CISCO gear!! email me for a quote Brian Feeny, CCIE #8036 Scarlett Parria [EMAIL PROTECTED] [EMAIL PROTECTED] 318-213-4709 318-213-4701 Netjam, LLC http://www.netjam.net 333 Texas St.VISA/MC/AMEX/COD Suite 1401 30 day warranty Shreveport, LA 71101 Cisco Channel Partner toll free: 866-2NETJAM phone:318-212-0245 fax:318-212-0246 I'm buying / selling used CISCO gear!! email me for a quote Brian Feeny, CCIE #8036 Scarlett Parria [EMAIL PROTECTED] [EMAIL PROTECTED] 318-213-4709 318-213-4701 Netjam, LLC http://www.netjam.net 333 Texas St. VISA/MC/AMEX/COD Suite 1401 30 day warranty Shreveport, LA 71101Cisco Channel Partner toll free: 866-2NETJAM phone: 318-212-0245 fax: 318-212-0246 [EMAIL PROTECTED] = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16719t=16719 -- FAQ, list archives, and subscription info
help--needed hyperterminal [7:16490]
hi i earlier posted message where i said my 2900XL switch rebooted while trying to use hyperterminal ,i got many replies saying this is a known bug in Version 12.0(5)XP.but i tried locating this thing on cisco site but i am unable to do so.Any URL's and anything in this regard will be great help. Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16490t=16490 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: catalyst 2900 XL got reset [7:15835]
hi do uu have a url where they point ot this problem as i need to make sure that this is the case before saying it to heads Arun Sharma Mike Mandulak wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Yep, that's the version that has the Hyperterm bug. - Original Message - From: Arun To: Sent: Tuesday, August 14, 2001 1:01 AM Subject: Re: catalyst 2900 XL got reset [7:15835] the version i am running is Version 12.0(5)XP cisco skin wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... This is a known bug. I do believe though that the latest IOS fixes it. What are you running? a wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi i was trying to access the 2900XL series switch through hyperterminal and strange thing happened ,it got reset by it on.did this happened with somebody else also ,just curious to know.what could be the reason Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16155t=15835 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: catalyst 2900 XL got reset [7:15835]
the version i am running is Version 12.0(5)XP cisco skin wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... This is a known bug. I do believe though that the latest IOS fixes it. What are you running? a wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi i was trying to access the 2900XL series switch through hyperterminal and strange thing happened ,it got reset by it on.did this happened with somebody else also ,just curious to know.what could be the reason Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15972t=15835 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to keep the clock always correct in a router? [7:13470]
hi It can be done in many ways ..you can configure the ntp server from which it can get the clock.you can use the comand ntp server X.X.X.X where X is your ip addres for the NTP server.And also you can use server for providing clock to other equipments on the network u can downlaod the ntp server to ur network and get that synchronized from other ntp servers around the world and then use this as reference for ur equipments.you can get some from www.download.com and look for ntp servers in search query. regards Arun Sharma Derric Gu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Everytime when I reload the router, its clock will be changed to year 1993. And the time of the router is important for vpn, how can I keep the clock of the router always correct? Derric Gu Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13471t=13470 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Routing problem. PLS help -- Urgent [7:13474]
Hi 20.1.1.0/30 10.4.1.0/30 20.1.1.0/24 check above the subnet mask .do see anything there. regards Dave W. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi there, I have the following config: R1750(L) --- R7206 -- R1750(R) R1750(L): Serial 0: 20.1.1.1/30 R7206: Serial 0: 20.1.1.2/30 Serial 1: some IP Tunnel 1: 10.4.1.2/30 over the serial link 1 R1750(R): Tunnel 1: 10.4.1.2/30 over the serial link 0 Serial 0: some IP At the left-hand side R1750, the routing table is: 0.0.0.0 20.1.1.2 At the R7206, the routing table is: 20.1.1.0/30 known via connected 10.4.1.0/30 known via connected At the right-hand side R1750, the routing table is: 20.1.1.0/24 known via static, directly connected, via Tunnel 0 My problem is that at the righ-hand side R1750, I am not able to ping 20.1.1.1 and vice verse. Can someone pls suggest me if there is any fault that causes the problem. Your help is really appreciated. Regards, David _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13476t=13474 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Plugging into console port rebooted switch ... [7:13478]
Hi Is it rebooted the switch when u started the KeaTerm term software or it just rebooted the switch when u plugged in the console cable.If it rebooted when u started the KeaTerm term try using the windows hyperterminal and see if the problem occurs again .I think it should not Regards evans jason wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... recently i plugged a laptop using KeaTerm term em software into the console port of a 2924 switch and it immediately rebooted the switch. i repeated the operation a 2nd time making sure i didn't have a reload command in the waiting and it happened again. has this every happened to anyone? if so, any ideas on how to not let it happen again - this switch is a production switch w/ all the NT servers. thanks, jason Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13479t=13478 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Expertises [7:13545]
Check this http://www.cisco.com/warp/public/625/ccie/ccie_program/ccie_present.html Arun --- Leonardo Borda wrote: Does anyone know how many CCIE exist around the world? Does cisco publish that information? Leonardo Borda [EMAIL PROTECTED] = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13555t=13545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cabling info needed [7:13317]
hi Please check the folowing link http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel7/hrdwrnst/tchw cabl.htm regards Farhan Ahmed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... cisco.com/go/tools -Original Message- From: Omer Ehsan Dar [mailto:[EMAIL PROTECTED]] Sent: Monday, July 23, 2001 10:53 AM To: [EMAIL PROTECTED] Subject: Cabling info needed [7:13317] Hi all, Where can I find good cabling info related to LAN networking and the cisco switches in particular. Thanks Omer Ehsan dar Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13320t=13317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cabling info needed [7:13317]
check this also http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3900/c3930ug/cables.h tm regards Arun wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi Please check the folowing link http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel7/hrdwrnst/tchw cabl.htm regards Farhan Ahmed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... cisco.com/go/tools -Original Message- From: Omer Ehsan Dar [mailto:[EMAIL PROTECTED]] Sent: Monday, July 23, 2001 10:53 AM To: [EMAIL PROTECTED] Subject: Cabling info needed [7:13317] Hi all, Where can I find good cabling info related to LAN networking and the cisco switches in particular. Thanks Omer Ehsan dar Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13321t=13317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
X25 Router problem [7:13340]
Hi I have x25 router configured at my office .It has two serial ports coming from lets say source. the ports being as ser1/1 and ser2/1 and from this router 2 ports each are connected to two machines working in redundancy.It like this Source ports: ser1/1,ser2/1--X25 Address 010102 for ser1/1 Machine1:ser1/3,ser2/3-X25 addresses 010104,010105 Machine2:ser2/0,ser2/2-X25 addresses 010104,010105 Out of these two machines only one will be active at a time .I have the routes configured here as follows.The problem is these machines work fine and switch from machine 1 to 2 is ok but if we reset the source then we loose connectivity between the ser2/3 if machine 1 is active .Is the route settings wrong .as configured below.Pls help onthis 1 dest 010101 Serial1/0 2 dest 010102 Serial1/1 3 dest 010103 Serial1/2 4 dest 010104 Serial1/3 5 dest 010301 xot 3.254.254.125 6 dest 010302 xot 3.254.254.125 7 dest 010303 xot 3.254.254.125 8 dest 1012*Serial1/1 9 dest 1032*Serial1/0 10 dest 010104 Serial2/0 11 dest 010105 Serial2/3 12 dest 010105 Serial2/2 Regards Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13340t=13340 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: sh system command ? [7:13330]
Hi which IOS ver ur using because in older ones u can use show system and it will show something like this PS1-Status PS2-Status Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout -- -- -- -- -- -- -- --- ok ok ok offok 20,13:51:1820 min PS1-Type PS2-Type Modem Baud Traffic Peak Peak-Time -- -- --- - --- - disable 9600 0% 4% Fri Jul 6 2001, 16:38:45 System Name System Location System Contact Switch A Regards Farhan Ahmed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... current traffic rate -Original Message- From: Phil Barker [mailto:[EMAIL PROTECTED]] Sent: Monday, July 23, 2001 1:28 PM To: [EMAIL PROTECTED] Subject: sh system command ? [7:13330] Hi, The 'show system' command on a Cat 5500 contains a current traffic level and a peak level. How long are these values valid for. e.g is the current traffic value over a five minute period ? Is the peak value from when the Supy is booted up ? PS : checked cisco.com but cannot find an answer. Regards, Phil. Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13341t=13330 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 1601, dial-in server... [7:13285]
hi try this link http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:PPP; s=Implementation_and_Configuration Regards Justin wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hey all :) Im trying to configure my 1601, to recieve calls via async serial port, and initiate a ppp connection, like an access server.. i can make it dial out and connect to my isp. etc, but i cant seem to get it to do the opossite. i've looked on cisco.com and im starting to think its not possible on these type of routers ? anyone done this ?? thanks :) Justin Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13343t=13285 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISL or 802.1Q? [7:13325]
Hi ISL is cisco stuff ..if ur network is all cisco you can use ISL in that but if it involves other switches or in near future u see this thing use Dot.1Q.This is for the equipment ..and for the performance thing which one is better i thing somebody more experienced can help u on this . regards Arun Sharma Sammi wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'm not clear on which standard I should use for VLAN setup. I will be using a 2948G-L3 as a core switch. Connected to the core will be a number of 2948xl as access switches. The majority of these access ports will connect directly to end stations, though some will connect to other 2948s (via fiber and via wireless) which then will connect to end stations. Does this last fact mean I must use ISL so as to implement trunking? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13342t=13325 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fatkids vs. CCBOOTCAMP [7:13413]
Hi I heard ccbootcamp labs are best for CCIE lab preparation. My Question is where this www.fatkid.com labs stands when you compare with ccbootcamp labs. Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13413t=13413 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fatkid lab versus CCbootcamp labs [7:13451]
Hi I heard CCBootcamp labs are best for CCIE lab preparation. Can anybody tell, where this www.fatkid.com labs stands in comparison to CCbootcamp labs. Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13451t=13451 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN Basics help needed--beginner [7:12406]
Hi i am new to this VPN world i need to know some basics about it .how do i start lets say i have mainoffice i want to connect it ot my clients ...take may be 2 from different lcoations . Location1 mainoffice --| Location 2 now i know that both location 1 and 2 have their own connectivity to the internet and also mainoffice if we have to go for cheap solution. If i have a internet connection from main office say 3600 series router and may be other location it coould be same .(do we require this) Thats it ..all i know about VPN My question are for the locations 1 and 2 ,what will be we using to connect to mainoffice ..VPN clients i think are these clients to be from cisco for it to work with it can anybody tell in brief about how it all works then i think i should go about other things. I have read cicso have products for VPN ...what they basically do ...security i think is main thing ..or they do somethig else besides that. if ihave a Pix won't it solve the purpose if i let only certain ip's (which ip's i don't know) to have access. i am really confused i tried reading about it but i cann't find the basic things ..any help will be appreciated. Regardss arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12406t=12406 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: catalyst 5000 rebooted [7:12101]
hi i have IOS 4.4(1) running on my catalyst switches here so the command show Uptime is 11 days, 8 hours, 31 minutes thats it nothing else i could have checked this dear. any other suggestions regardss Arun sharma Peter Slow wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... werd. (right on) -humboldt -Original Message- From: GNOME [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 12, 2001 10:53 AM To: [EMAIL PROTECTED] Subject: Re: catalyst 5000 rebooted [7:12101] Hi How about doing a show version to see the reason of last reboot Arun wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hi we have catalyst 5000 in our organization and last week oneof our catalyst 5000 rebooted bu its own ...can anyboby tell me what could be the probabale cause or where one shoulb be looking for it ... how do i start looking for it .Please help this reboot has caused the services to be stopped for 15 minutes and it is really big issue for us why it happened ...i think i am totally stuck ..can anybody give a a start . Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12357t=12101 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
upgrade IOS from 4.4(1) to 5.5(9) for catalyst 5000 [7:12089]
Hi can anbody please help me with this i will be upgrading my catalyst 5000 IOS what are the things that needed to be taken care before doing this .i have supervisior card 2 runnnign on it and they are runnign in redudant mode ..i have 2 catalyst 5000what can be like probaable problems .i think i saw somehting like this on cisco but right now i am unable to find this . any help will be appreciated . Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12089t=12089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
catalyst 5000 rebooted [7:12101]
hi we have catalyst 5000 in our organization and last week oneof our catalyst 5000 rebooted bu its own ...can anyboby tell me what could be the probabale cause or where one shoulb be looking for it ... how do i start looking for it .Please help this reboot has caused the services to be stopped for 15 minutes and it is really big issue for us why it happened ...i think i am totally stuck ..can anybody give a a start . Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12101t=12101 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
call user data(4): 0XC0000000(unknown) [7:6975]
Hi i have x25 router i am using it to configure x25 route between the 2 seril interfaces but when i do the debug x25 events on the router as i am not able to communicate between the 2 serial ports i get something like this ...pls help from(6): 010301 to (6) 010303 Facilities:(0) call user data (4):0XC000(unknown) what does this mean i kow something is wrong but where ...pls tell thanx Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6975t=6975 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Exact debug- call user data(4): 0XC0000000(unknown) [7:6975]
Hi the exact debug is Serial0/0 :x25 I P1 Call Request 9150 8 lci 16 From(6): 010301 to (6) 010303 Facilities:(0) call user data (4):0XC000(unknown) Serial0/2:x25 O P3 call request (15) 8 lci 1 From(6): 010301 to (6) 010303 Facilities:(0) call user data (4):0XC000(unknown) Serial0/2 :X25 I P3 clear request (5) 8 lci 1 cause 0 debug 245 Serial0/0 :X25 I P7 clear request (5) 8 lci 16 cause 0 debug 245 Serial0/2 :X25 I P3 clear confirmation(3) 8 lci 1 Serial0/0:X25 I P7 clear confirmation(3) 8 lci 16 Thanx Regards Arun Sharma Arun wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi i have x25 router i am using it to configure x25 route between the 2 seril interfaces but when i do the debug x25 events on the router as i am not able to communicate between the 2 serial ports i get something like this ...pls help from(6): 010301 to (6) 010303 Facilities:(0) call user data (4):0XC000(unknown) what does this mean i kow something is wrong but where ...pls tell thanx Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6978t=6975 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
show trunk command doesn't work on my switch [7:6858]
Hi i am trying to set up trunking between 2900-xl and 7000 series router all other commands for the trunking work but show trunk is not there why..i configured it like this can anybody help I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch for trunk . i configure it using commands as below for the switch i do.. conf t int vlan 1 ip adress 192.168.3.215 255.255.255.0 ip default-gateway 192.168.3.210 conf ter int fast eth0/16 switchport mode trunk switchport trunk encapsulation isl(right ) swicthport trunk allowed vlan all conf ter int fast0/15 switchport access vlan 2 spannig portfast exit also i did like vlan database vtp server vlan 2 now for the router conf t int fast0/0 no shutdown exit int fast0/0.1 encap isl 1 ip add 192.168 .3.210 255.255.255.0 exit int fast0/0.2 encap isl 2 ip add 192.168 .4.210 255.255.255.0 exit the show ver shows 11.2(8)..rest of the commmands work .. am i forgetting anything ..do i need to use something like set trunk mode on or negotiate for it to work ... ..also after this if i do show cdp neigh the router see the switch but if i do it on switch it doesn't see the router ..please help . where i am doing wrong ..Please help Thanx in advance Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6858t=6858 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CAT 6509 urg help required [7:6384]
hi You can try taking out the modules and putting them back i have seen that this do the job most of the timedo this and see if it works ... Regards Arun Sharma Infotech wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear Group I am having one 6509 switch with 2 sup module cards (one in redudent mode). All of a sudden from past couple of days i am observing that my SUP 1 modules status LED is not glowing. Same time my sup2 modules management LED is glowing RED. But still my switch is working fine. When I give SH MOD command it shows status as ok for all the cards including SUP MODULE 1. For sup mod 2 the status shows as standby. I am also having MSFC-2 and PFC cards in the same SUP modules. My both sup modules are exactly identical. Does that mean that either of mine sup module is faulty. Any mod can fail at any time ???. How can I verify that my modules are working fine. Does anybody faced problem like this. many thanks in advance regds Get free email and a permanent address at http://www.netaddress.com/?N=1 FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6392t=6384 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Serial1/3.1 is deleted, line protocol is down [7:6090]
Hi let me explain what i mean to ask i try to configured a serial interface(sub interface) on ser1/3 i could n't achieve what i was trying to do (i was trying to configure a backup interface) so i removed the sub interface using command no int ser1/3.1 but now even after removing the interface i see the following thing when i use show int .. i think it should not be there ...right or i am wrong so why it still show this Serial1/3.1 is deleted, line protocol is down Hardware is M4T MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25 Serial2/0 is down, line protocol is down Hardware is M4T Description: BGW 1.1 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25, loopback not set X.25 DCE, address , state R/Inactive, modulo 8, timer 0 Regards Arun Sharma ElephantChild wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... On Mon, 28 May 2001, Arun wrote: Hi i am getting this message when i run show int command on 3600 series router with x25 on it i tried configuring it but i removed whats wrong can u pls help If you didn't do so already, read what the cisco docs say on show interface, then tell us what specific part you still don't understand, and what you think it could mean. Also tell us what other steps you took to answer your question, and how and why you think they failed. Or, if your question isn't what does a deleted/down status mean?, you'll have to tell us what it is. Regards Arun Sharma Serial1/3.1 is deleted, line protocol is down Hardware is M4T MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25 Serial2/0 is down, line protocol is down Hardware is M4T Description: BGW 1.1 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25, loopback not set X.25 DCE, address , state R/Inactive, modulo 8, timer 0 Defaults: idle VC timeout 0 cisco encapsulation input/output window sizes 2/2, packet sizes 128/128 Timers: T10 60 -- Someone approached me and asked me to teach a javascript course. I was about to decline, saying that my complete ignorance of the subject made me unsuitable, then I thought again, that maybe it doesn't, as driving people away from it is a desirable outcome. --Me FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6097t=6090 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Serial1/3.1 is deleted, line protocol is down [7:6090]
Hi Thanks for the information ..i will try this when i find time cause the router is on live network i cann't do tthat they will kill me ..can u pls tell about I have 3600 router coonfigured as x25 i have 2 slots each having 4 serial interfaces in it ... i have to configure this with 2 serial ports on slot one for x25 encapsulation and on slot 2 i have to configure 2 serial ports which need to act as redundant in case there is problem with slot 1 ports .. i have ver 11.3 runing on it i added the entries like ... x25 route 010104 int ser 1/2 x25 route 010104 int ser 1/3 x25 route 010103 int ser 2/2 x25 route 010103 int ser 2/3 First thing will this do the job the machines on the other end has 2 serial port for each machine one is active and one is standy .machine switch over to standy if it sees error i link so i need to route the packets to this standby machine with interface ser 2/2 and ser 2/3 . Now i read somewhere like x25 retry command and backup interface command ... how can i use them can anybody send me the configuration and also will this work on ver 11.3 i tried it on ver11.3 but i think it doesn';t support it Pls suggest something . Regards Arun Sharma Bishara, Anan wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... If u delete any subinterface u need to reboot the router to remove it. It will stay in that case until u reboot the router. Regards, Anan -Original Message- From: Arun [mailto:[EMAIL PROTECTED]] Sent: Mon, May 28, 2001 10:41 AM To: [EMAIL PROTECTED] Subject: Re: Serial1/3.1 is deleted, line protocol is down [7:6090] Hi let me explain what i mean to ask i try to configured a serial interface(sub interface) on ser1/3 i could n't achieve what i was trying to do (i was trying to configure a backup interface) so i removed the sub interface using command no int ser1/3.1 but now even after removing the interface i see the following thing when i use show int .. i think it should not be there ...right or i am wrong so why it still show this Serial1/3.1 is deleted, line protocol is down Hardware is M4T MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25 Serial2/0 is down, line protocol is down Hardware is M4T Description: BGW 1.1 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25, loopback not set X.25 DCE, address , state R/Inactive, modulo 8, timer 0 Regards Arun Sharma ElephantChild wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... On Mon, 28 May 2001, Arun wrote: Hi i am getting this message when i run show int command on 3600 series router with x25 on it i tried configuring it but i removed whats wrong can u pls help If you didn't do so already, read what the cisco docs say on show interface, then tell us what specific part you still don't understand, and what you think it could mean. Also tell us what other steps you took to answer your question, and how and why you think they failed. Or, if your question isn't what does a deleted/down status mean?, you'll have to tell us what it is. Regards Arun Sharma Serial1/3.1 is deleted, line protocol is down Hardware is M4T MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25 Serial2/0 is down, line protocol is down Hardware is M4T Description: BGW 1.1 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25, loopback not set X.25 DCE, address , state R/Inactive, modulo 8, timer 0 Defaults: idle VC timeout 0 cisco encapsulation input/output window sizes 2/2, packet sizes 128/128 Timers: T10 60 -- Someone approached me and asked me to teach a javascript course. I was about to decline, saying that my complete ignorance of the subject made me unsuitable, then I thought again, that maybe it doesn't, as driving people away from it is a desirable outcome. --Me FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6101t=6090 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
help --------------Backup interface [7:6106]
hi i am creating backup interfaces for two of my serial interfaces i wanted to know do i need to add routes for the backup interfaces as well ...or it will be same as entered earlier for the primary interfaces .Pls help on this .. i am using cisco 3600 with x25 . i want to know whether this will work or not .. routes added are x25 route 010104 int ser1/3 backup interface is set like this int ser 1/3 backup int ser2/3 backup delay 20 20 and same for the other interface i can't test this config as the router is on live n/w i cann't bring it down unless i know this isgonna work--so pls help Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6106t=6106 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Configuring backup interface .......urgent [7:6087]
Hi I have 3600 router coonfigured as x25 i have 2 slots each having 4 serial interfaces in it ... i have to configure this with 2 serial ports on slot one for x25 encapsulation and on slot 2 i have to configure 2 serial ports which need to act as redundant in case there is problem with slot 1 ports .. i have ver 11.3 runing on it i added the entries like ... x25 route 010104 int ser 1/2 x25 route 010104 int ser 1/3 x25 route 010103 int ser 2/2 x25 route 010103 int ser 2/3 First thing will this do the job the machines on the other end has 2 serial port for each machine one is active and one is standy .machine switch over to standy if it sees error i link so i need to route the packets to this standby machine with interface ser 2/2 and ser 2/3 . Now i read somewhere like x25 retry command and backup interface command ... how can i use them can anybody send me the configuration and also will this work on ver 11.3 i tried it on ver11.3 but i think it doesn';t support it Pls suggest something . Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6087t=6087 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Serial1/3.1 is deleted, line protocol is down [7:6090]
Hi i am getting this message when i run show int command on 3600 series router with x25 on it i tried configuring it but i removed whats wrong can u pls help Regards Arun Sharma Serial1/3.1 is deleted, line protocol is down Hardware is M4T MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25 Serial2/0 is down, line protocol is down Hardware is M4T Description: BGW 1.1 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation X25, loopback not set X.25 DCE, address , state R/Inactive, modulo 8, timer 0 Defaults: idle VC timeout 0 cisco encapsulation input/output window sizes 2/2, packet sizes 128/128 Timers: T10 60 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6090t=6090 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: help --------------Pls ................OIR Error [7:6021]
i don't find these commands on the my router i am using ver 11.3 both are not here or may be i don't know how to run them Arun Sharma Rahul Kachalia wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Well not sure about the stat but since its an event not an specific error I would try following : - Though there is an OIR event configure same port put it online, verify X25 works. Even if it works make sure you dont have any errors on link. - Try changing cable/PA/bay on same box. - If you another router running same image then use same cable/pa to make sure if you get same error. If that works then change logging level, also make sure you dont have any records by typing following commands if its there then add more information to mail. - show exception - show align thanks, rahul. - Original Message - From: Arun To: Sent: Saturday, May 26, 2001 10:06 PM Subject: Re: help --Pls OIR Error [7:6021] Hi Here the detail for u i have ver 11.8 runnign on it Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-JS-M), Version 11.3(8), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 02-Feb-99 14:13 by dschwart Image text-base: 0x60008918, data-base: 0x608E8000 ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE (f c1) System image file is flash:c3640-js-mz.113-8, booted via flash cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of memory. Processor board ID 13831748 R4700 processor, Implementation 33, Revision 1.0 Bridging software. Regards Arun Sharma Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Beat the hell out of me. In the past I have posted about problems with earlier 12.x codes, where if I plugged serial cables into a serial interface while the router was powered on, IP would not work, although IPX would. I've had people tell me I was an idiot, and this couldn't happen. But Pamela Forsythe told me she recognized the phenomenon. I've moved my routers onto various versions of 12.1 code, and have not seen the problem. Actually, I don't think I ever saw the problem with later versions of 12.0 code either. Still curious what IOS version you are running. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arun Sent: Saturday, May 26, 2001 8:02 AM To: [EMAIL PROTECTED] Subject: Re: help --Pls OIR Error [7:6021] hi yes i tried reloading the router with the cables attached and it worked .. thanks for the help but what could be the reason for that if i know it will be a help . Arun Sharma Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have you tried reloading the router with the cable attached? Or blowing away the X.35 config, reloading with the cable attached, then putting in the X.25 What version of IOS are you running? I have documented a couple of problems revolving around serial port cables with 12.0.4 or so. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arun Sent: Saturday, May 26, 2001 3:58 AM To: [EMAIL PROTECTED] Subject: help --Pls OIR Error [7:6021] Hi I have router configured as X25 router .I have 2 slots in it with each having 4 serial ports on them.The problem is that when i connect the cisco provided cable just the cable to the administratively shutdown serial port it gives me error : %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88 ( i have checked OIR it stands online insertion and removal but i could not find this particular error) and this also hangs the router i have checked the cable i can not do many thngs on the router as it is in live n/w ..Please help ..the router works well after i remove cable and restart the router . Any help will be appreciated Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and
help --------------Pls ................OIR Error [7:6021]
Hi I have router configured as X25 router .I have 2 slots in it with each having 4 serial ports on them.The problem is that when i connect the cisco provided cable just the cable to the administratively shutdown serial port it gives me error : %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88 ( i have checked OIR it stands online insertion and removal but i could not find this particular error) and this also hangs the router i have checked the cable i can not do many thngs on the router as it is in live n/w ..Please help ..the router works well after i remove cable and restart the router . Any help will be appreciated Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6021t=6021 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: help --------------Pls ................OIR Error [7:6021]
hi yes i tried reloading the router with the cables attached and it worked .. thanks for the help but what could be the reason for that if i know it will be a help . Arun Sharma Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have you tried reloading the router with the cable attached? Or blowing away the X.35 config, reloading with the cable attached, then putting in the X.25 What version of IOS are you running? I have documented a couple of problems revolving around serial port cables with 12.0.4 or so. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arun Sent: Saturday, May 26, 2001 3:58 AM To: [EMAIL PROTECTED] Subject: help --Pls OIR Error [7:6021] Hi I have router configured as X25 router .I have 2 slots in it with each having 4 serial ports on them.The problem is that when i connect the cisco provided cable just the cable to the administratively shutdown serial port it gives me error : %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88 ( i have checked OIR it stands online insertion and removal but i could not find this particular error) and this also hangs the router i have checked the cable i can not do many thngs on the router as it is in live n/w ..Please help ..the router works well after i remove cable and restart the router . Any help will be appreciated Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6031t=6021 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: help --------------Pls ................OIR Error [7:6021]
Hi Here the detail for u i have ver 11.8 runnign on it Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-JS-M), Version 11.3(8), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 02-Feb-99 14:13 by dschwart Image text-base: 0x60008918, data-base: 0x608E8000 ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE (f c1) System image file is flash:c3640-js-mz.113-8, booted via flash cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of memory. Processor board ID 13831748 R4700 processor, Implementation 33, Revision 1.0 Bridging software. Regards Arun Sharma Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Beat the hell out of me. In the past I have posted about problems with earlier 12.x codes, where if I plugged serial cables into a serial interface while the router was powered on, IP would not work, although IPX would. I've had people tell me I was an idiot, and this couldn't happen. But Pamela Forsythe told me she recognized the phenomenon. I've moved my routers onto various versions of 12.1 code, and have not seen the problem. Actually, I don't think I ever saw the problem with later versions of 12.0 code either. Still curious what IOS version you are running. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arun Sent: Saturday, May 26, 2001 8:02 AM To: [EMAIL PROTECTED] Subject: Re: help --Pls OIR Error [7:6021] hi yes i tried reloading the router with the cables attached and it worked .. thanks for the help but what could be the reason for that if i know it will be a help . Arun Sharma Chuck Larrieu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have you tried reloading the router with the cable attached? Or blowing away the X.35 config, reloading with the cable attached, then putting in the X.25 What version of IOS are you running? I have documented a couple of problems revolving around serial port cables with 12.0.4 or so. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Arun Sent: Saturday, May 26, 2001 3:58 AM To: [EMAIL PROTECTED] Subject: help --Pls OIR Error [7:6021] Hi I have router configured as X25 router .I have 2 slots in it with each having 4 serial ports on them.The problem is that when i connect the cisco provided cable just the cable to the administratively shutdown serial port it gives me error : %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88 ( i have checked OIR it stands online insertion and removal but i could not find this particular error) and this also hangs the router i have checked the cable i can not do many thngs on the router as it is in live n/w ..Please help ..the router works well after i remove cable and restart the router . Any help will be appreciated Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6053t=6021 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pass CCNA with 953, I have a lot of study stuff!! [7:6035]
hi i am preparing for ccna can u pls email me the stuff for that ...i know i won't be able to do the exchange ..but that will be a help to me thanks in advance Regarsd Arun Sharma killer wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a lot of studying material here for CCNA (over 2000 MCs and other notes) and MCSE W2K Core! If you have other studying material such as CCNP/CCIE/ MCSE W2K electives , pls email to me! I can exchange my material with you! FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6054t=6035 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Regarding dte and dce for x25 router--urgent [7:6055]
Hi i have a network like this ... device-dte--x25 int 1/2 dce.clockrate 64000 device-dcex25 int 2/3 dte i just wanted to know if two interfaces on router need to communicate will they need to act as same both dte or dce or it doesn't matter at all.Router will just route the packets Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6055t=6055 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Regarding negotiations [7:5380]
Yes i tried different cables ..at it seems i have seen this problem on 3com 3300 series switch..also with different location different cable and different n/w cards Regards Andras Bellak wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have you tried any other network cables - sounds like a distance issue, but could also easily be a bad cable. andras -Original Message- From: Arun [mailto:[EMAIL PROTECTED]] Sent: Monday, May 21, 2001 10:12 PM To: [EMAIL PROTECTED] Subject: Regarding negotiations [7:5380] Hi I have catalyst 5000 series switch the problem is when i connect a laptop or pc to it with a small length cable say 10-20 feet ..i can talk to it with my settings of duplex as auto-select and speed as auto-select both the settings are of network card i am using ( i am using xircom pc card and 3com pc card for the laptops ) but when the length is increased say 50-70 feet i cann't talk to it anymore and it shows blinking lights on the switch side which i think it means negotiations problemso i set my laptop or pc to duplex full and speed to 10mbps then i am only able to talk to it .no other mode is working ..both this settings are on the workstations side . Can anyone explain what the problem is or what is wrong somewhere . Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5407t=5380 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Regarding negotiations [7:5380]
Hi The switch ports negotiate to half duplex and 10mbps ..linkno they are different pc's and with different n/w cards Regards Andras Bellak wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Do the same computers have the same issues regardless of which port you use on the switch? What do the switch ports negotiate to when autonegotiation is enabled on the pc? andras -Original Message- From: Arun [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 22, 2001 2:50 AM To: [EMAIL PROTECTED] Subject: Re: Regarding negotiations [7:5380] Yes i tried different cables ..at it seems i have seen this problem on 3com 3300 series switch..also with different location different cable and different n/w cards Regards Andras Bellak wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Have you tried any other network cables - sounds like a distance issue, but could also easily be a bad cable. andras -Original Message----- From: Arun [mailto:[EMAIL PROTECTED]] Sent: Monday, May 21, 2001 10:12 PM To: [EMAIL PROTECTED] Subject: Regarding negotiations [7:5380] Hi I have catalyst 5000 series switch the problem is when i connect a laptop or pc to it with a small length cable say 10-20 feet ..i can talk to it with my settings of duplex as auto-select and speed as auto-select both the settings are of network card i am using ( i am using xircom pc card and 3com pc card for the laptops ) but when the length is increased say 50-70 feet i cann't talk to it anymore and it shows blinking lights on the switch side which i think it means negotiations problemso i set my laptop or pc to duplex full and speed to 10mbps then i am only able to talk to it .no other mode is working ..both this settings are on the workstations side . Can anyone explain what the problem is or what is wrong somewhere . Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5514t=5380 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help its very very urgent ..isl trunking [7:5272]
Hi I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch for trunk . i configure it using commands as below for the switch i do.. conf t int vlan 1 ip adress 192.168.3.215 255.255.255.0 ip default-gateway 192.168.3.210 conf ter int fast eth0/16 switchport mode trunk switchport trunk encapsulation isl(right ) swicthport trunk allowed vlan all conf ter int fast0/15 switchport access vlan 2 spannig portfast exit also i did like vlan database vtp server vlan 2 now for the router conf t int fast0/0 no shutdown exit int fast0/0.1 encap isl 1 ip add 192.168 .3.210 255.255.255.0 exit int fast0/0.2 encap isl 2 ip add 192.168 .4.210 255.255.255.0 exit now the problem is i am not able to ping from router to interface 192.168.3.210 ..am i doing something wrong ..also after this if i do show cdp neigh the router see the switch but if i do it on switch it doesn't see the router ..please help . where i am doing wrong ..Please help Thanx in advance Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5272t=5272 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISL using 11.2????? [7:5273]
Yes i think u need to upgrade to 11.8 Jeff wrote in message 9aricg$6i0$[EMAIL PROTECTED]">news:9aricg$6i0$[EMAIL PROTECTED]... I am using a 4500 with a Fast Ethernet interface and would like to be able to route between VLANs that are setup on my 2900. I don't have the option to use encapsulation ISL using Ver 11.2 on the 4500. Do I have to upgrade to 11.3 or something higher to be able to use ISL? Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5273t=5273 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help its very very urgent ..isl trunking [7:5272]
Hi I have checked the trunking mode on the port it shows it as encaps isl and i found this with show int fast0/16 switchport command Regards Vincent Chong wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... What do you find in show vtp comand set ? Check your trunking mode in the catalyst. HTH Vincent Chong Arun Hi I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch for trunk . i configure it using commands as below for the switch i do.. conf t int vlan 1 ip adress 192.168.3.215 255.255.255.0 ip default-gateway 192.168.3.210 conf ter int fast eth0/16 switchport mode trunk switchport trunk encapsulation isl(right ) swicthport trunk allowed vlan all conf ter int fast0/15 switchport access vlan 2 spannig portfast exit also i did like vlan database vtp server vlan 2 now for the router conf t int fast0/0 no shutdown exit int fast0/0.1 encap isl 1 ip add 192.168 .3.210 255.255.255.0 exit int fast0/0.2 encap isl 2 ip add 192.168 .4.210 255.255.255.0 exit now the problem is i am not able to ping from router to interface 192.168.3.210 ..am i doing something wrong ..also after this if i do show cdp neigh the router see the switch but if i do it on switch it doesn't see the router ..please help . where i am doing wrong ..Please help Thanx in advance Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5291t=5272 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help its very very urgent ..isl trunking [7:5272]
Hi How dowe check that ..and how is it set Arun Vincent Chong wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... First, trunk mode is desirable, non-neigotate, auto, none, something like that. Second, isl is an encapsulation method, it is not a trunk mode. I am pretty sure you have layer 2 problem, cdp command is layer 2 troubleshooting tool. HTH Vincent Chong Arun Hi I have checked the trunking mode on the port it shows it as encaps isl and i found this with show int fast0/16 switchport command Regards Vincent Chong wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... What do you find in show vtp comand set ? Check your trunking mode in the catalyst. HTH Vincent Chong Arun Hi I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch for trunk . i configure it using commands as below for the switch i do.. conf t int vlan 1 ip adress 192.168.3.215 255.255.255.0 ip default-gateway 192.168.3.210 conf ter int fast eth0/16 switchport mode trunk switchport trunk encapsulation isl(right ) swicthport trunk allowed vlan all conf ter int fast0/15 switchport access vlan 2 spannig portfast exit also i did like vlan database vtp server vlan 2 now for the router conf t int fast0/0 no shutdown exit int fast0/0.1 encap isl 1 ip add 192.168 .3.210 255.255.255.0 exit int fast0/0.2 encap isl 2 ip add 192.168 .4.210 255.255.255.0 exit now the problem is i am not able to ping from router to interface 192.168.3.210 ..am i doing something wrong ..also after this if i do show cdp neigh the router see the switch but if i do it on switch it doesn't see the router ..please help . where i am doing wrong ..Please help Thanx in advance Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5379t=5272 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Regarding negotiations [7:5380]
Hi I have catalyst 5000 series switch the problem is when i connect a laptop or pc to it with a small length cable say 10-20 feet ..i can talk to it with my settings of duplex as auto-select and speed as auto-select both the settings are of network card i am using ( i am using xircom pc card and 3com pc card for the laptops ) but when the length is increased say 50-70 feet i cann't talk to it anymore and it shows blinking lights on the switch side which i think it means negotiations problemso i set my laptop or pc to duplex full and speed to 10mbps then i am only able to talk to it .no other mode is working ..both this settings are on the workstations side . Can anyone explain what the problem is or what is wrong somewhere . Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5380t=5380 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX question... [7:5248]
Hi Can we do the above thing by opening conduits from the ip's that the dial-up users will be using for giving them the access. just curious Regards Arun Sharma Darren Crawford wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... He said telnet into the Internet router and ping through the PIX. Not telnet into it. Rizzo - If you have total control of you Internet router, you may need to NAT there also towards the PIX in order to get your desired affect. I was recently at a client that used the private 10.0.0.0 network internally and the private 172.19.0.0 for their DMZ connections to partner companies. Some of their partners would not accept the 172.19.0.0 scheme and supplied the company with some registered address space. To make the connection we NAT'd on the partner end (router owned by my client) and on the home end of the connection in the PIX. This provide FTP and TN3270 connectivity to my client's site from the partner company's network. I know it's not exactly your scenario but it worked. HTH D. At 08:14 PM 05/21/2001 -0400, syson wrote: hi Rizzo! You can not even telnet into your PIx from the outside interface, nor you can telnet into it without VPN or SSH. Making the PIX work the way you want (in contrary to the usual way of NATing high security to Low security) won't work; It's how PIXs are made can not be modified to suite every needs. You might be looking at other routers to get your idea to work . but not PIX. Any ideas, suggestions, corrects comments; I would like to hear from you guys! Syson Suy If Life is a Game, These are the Rules: Experience is a hard teacher. She give the test first and the lessons afterwards. - Original Message - From: Richie, Nathan To: Sent: Monday, May 21, 2001 5:05 PM Subject: RE: PIX question... [7:5248] I beg to differ. I do not believe this can be done. When the PIX translates (either dynamically or statically), it takes a private IP address (inside interface) and translates it to a Public IP address (outside). Then the outside interface will process ALL packets for that Public IP address and direct them to the internal source (private IP address). So if you have a static NAT, say for like this static (inside, outside) 99.99.99.99 10.1.1.1 netmask 255.255.255.255 and on the router you have assigned the 99.99.99.99 to the dialup user, then you have 2 devices on the LAN that are assigned the 99.99.99.99 address (the router and the PIX) You translate an IP address from a more secure network to the less secure network, in this case from the inside network to the outside network. So you would have to reverse the security settings, effectively opening up your LAN to the world. You could do a couple of other solutions: 1) VPN between router PIX 2) Terminate clients inside the PIX 3) Create an IP pool on the router and allow full access with an access-list (for this range of IP addresses) on the outside interface of the PIX. This is my understanding of how the PIX and NAT translations work, but I have not tested this to disprove it, so if I am in error and some has tested this and I am wrong, please let me know. Hope this helps. Nathan -Original Message- From: Darren Crawford [mailto:[EMAIL PROTECTED]] Sent: Monday, May 21, 2001 4:01 PM To: [EMAIL PROTECTED] Subject: RE: PIX question... [7:5248] OK kids. Allowing packets from a lower security level interface to a higher security level interface requires a conduit or access list. So yes, it can be done. I wouldn't forget about security though. ;^) D. At 01:50 PM 05/21/2001 -0400, Rizzo Damian wrote: Actually it seems as if you understand exactly what I'm asking. Your idea is very similar to mine. However it didn't work unfortunately. Let me ask this another way, if you don't mind...You have an internet router which is directly connected to the external (un-trusted) interface of your PIX firewall. Basically I want to be able to access my internal LAN with private IP addresses from the Internet router with Public IP addresses. So I should be able to telnet onto my internet router and ping my privately held LAN. Forget about Security, I just want to know if it can be done. The static mapping doesn't seem to work. Probably because it require a one-to-one mapping no? Thanks for any help in advance! -Rizzo -Original Message- From: Craig Columbus [mailto:[EMAIL PROTECTED]] Sent: Monday, May 21, 2001 1:12 PM To: [EMAIL PROTECTED] Subject: RE: PIX question... [7:5248] I'm not clear on what you're asking. Are you asking if the PIX can take a public IP and make it appear as a private IP on the internal network? The answer is yes, although you certainly want to be careful with this and I c
Re: Help its very very urgent ..isl trunking [7:5272]
Hi one more thing what should be the release we should be using for using this .. the current release we are using is .Rel.11.2(8)SA5 Arun wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi I am facing problem in setting the isl trunk between 29900xL series switch and 7100 series router .The configuration is like i am using fast ethernet port 0/16 of switch for trunk . i configure it using commands as below for the switch i do.. conf t int vlan 1 ip adress 192.168.3.215 255.255.255.0 ip default-gateway 192.168.3.210 conf ter int fast eth0/16 switchport mode trunk switchport trunk encapsulation isl(right ) swicthport trunk allowed vlan all conf ter int fast0/15 switchport access vlan 2 spannig portfast exit also i did like vlan database vtp server vlan 2 now for the router conf t int fast0/0 no shutdown exit int fast0/0.1 encap isl 1 ip add 192.168 .3.210 255.255.255.0 exit int fast0/0.2 encap isl 2 ip add 192.168 .4.210 255.255.255.0 exit now the problem is i am not able to ping from router to interface 192.168.3.210 ..am i doing something wrong ..also after this if i do show cdp neigh the router see the switch but if i do it on switch it doesn't see the router ..please help . where i am doing wrong ..Please help Thanx in advance Regards Arun Sharma FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5386t=5272 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2511 Reverse Telnet Problems - Long [7:2041]
Try this On terminal Server 2511, do not use no exec command. It will fix this problem.. Arun --- perryb wrote: Hello, I'm still having 2511 terminal server reverse telnet problems. This may be a little long, but I want to provide all the details. Before I ramble on, is there any way to verify that the 2511 line interface hardware is not broken ? I've swapped out my octal cable and I've changed the ios version. So here goes... Here are the 2511 pertinent command lines: interface Loopback0 ip address 1.1.1.10 255.255.255.255 line 1 16 no exec transport input all ! Here are the router (2501) lines that I'm trying to successfully rev telnet to (console port): interface Loopback0 ip address 1.1.1.1 255.255.255.255 line con 0 ! Here is the sho line of the 2511 before attempting the rev telnet: Tty Typ Tx/RxA Modem Roty AccO AccI Uses Noise Overruns Int 0 CTY -- --- 2 0 0/0 - 1 TTY 9600/9600 -- --- 12 1 0/0 - !! Here is the sho line 1 of the 2511 before attempting rev telnet: Line 1, Location: , Type: Length: 24 lines, Width: 80 columns Baud rate (TX/RX) is 9600/9600, no parity, 2 stopbits, 8 databits Status: Ready Capabilities: none Modem state: Ready Modem hardware state: noCTS noDSR DTR RTS Special Chars: Escape Hold Stop Start Disconnect Activation ^^xnone - - none Timeouts: Idle EXECIdle Session Modem Answer Session Dispatch 00:10:00never none not set Idle Session Disconnect Warning never Login-sequence User Response 00:00:30 Autoselect Initial Wait not set Modem type is unknown. Session limit is not set. Time since activation: never Editing is enabled. History is enabled, history size is 10. DNS resolution in show commands is enabled Full user help is disabled Allowed transports are pad v120 telnet rlogin. Preferred is telnet. No output characters are padded No special data dispatching characters Here is the sho line of the 2501 before rev telnet: Tty Typ Tx/RxA Modem Roty AccO AccI Uses Noise Overruns Int 0 CTY -- --- 0 0 0/0 - 1 AUX 9600/9600 -- --- 0 0 0/0 - ! This is my rev telnet execution with debug out put from the console of the 2511 TermServ#tel 1.1.1.10 2001 /debug Trying 1.1.1.10, 2001 ... Open [TN: received WILL ECHO (1)] [TN: sent DO ECHO (1)] [TN: received WILL SUPPRESS-GA (3)] [TN: sent DO SUPPRESS-GA (3)] [TN: received DO TTY-TYPE (24)] [TN: sent WILL TTY-TYPE (24)] [TN: received DO WINDOW-SIZE (31)] [TN: sent WILL WINDOW-SIZE (31)] [TN: Sent SB NAWS 100 36] [TN: recv SB 24 1 ] [TN: Sent SB 24 0 vt100] ! At this point, the terminal freezes and no characters echo to the terminal - basically, it's frozen. I then do a ctrl+shift+6+x to break out and have a look at things...this is what I see: Output of sho line 1 on 2511: Tty Typ Tx/RxA Modem Roty AccO AccI Uses Noise Overruns Int *1 TTY 9600/9600 -- --- 13 1 0 - Line 1, Location: , Type: vt100 Length: 36 lines, Width: 100 columns Baud rate (TX/RX) is 9600/9600, no parity, 2 stopbits, 8 databits Status: Ready, Connected, Active Capabilities: none Modem state: Ready Modem hardware state: CTS* DSR* DTR RTS Special Chars: Escape Hold Stop Start Disconnect Activation ^^xnone - - none Timeouts: Idle EXECIdle Session Modem Answer Session Dispatch 00:10:00never none not set Idle Session Disconnect Warning never Login-sequence User Response 00:00:30 Autoselect Initial Wait not set Modem type is unknown. Session limit is not set. Time since activation: 00:02:30 Output of sho user on 2511: Line User Host(s) Idle Location * 0 con 01.1.1.10 00:00:02 1 tty 1
Re: flashing 3620 Please help!
Hi it seems that there is some access right problem on the tftp server if ur using the unix use chmod command to change its right to rwx and it should workif ur in NT see the rights of the file Hope it will work Arun ""Justin Lofton"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I'm trying to flash a 3620 but when I use the copy tftp flash command it tells me that destination filesystem is read-only. What the hell am I doing wrong? Justin Lofton Account Executive/CCNA Tredent Data Systems [EMAIL PROTECTED] (818) 222-3770 http://www.tredent.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: characters echoed when I connect to Cisco 7206
Hi the characters echoed might be due to the debug tools ..if ur seeing it running across ur screen again and agian then it has something to do with small servers tcp or udp .. i think this will solve ur problem...but i am not sure [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, I get the characters echoed when I connect to Cisco 7206 and don't get it on others. Is this configurable or dose it lay on my Reflection program. Tarry -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.de _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Whew! Can you smell that VLan?
Hi You can use the set span command to mirror the traffic of the desired ports to a particular port Arun ""The.rock"" [EMAIL PROTECTED] wrote in message 99c060$vl9$[EMAIL PROTECTED]">news:99c060$vl9$[EMAIL PROTECTED]... I believe that the 3500 Catalyst series will even let you monitor ports on other switches if you want. Check into it, but I think you can. ""NetEng"" [EMAIL PROTECTED] wrote in message 99bbkk$p8a$[EMAIL PROTECTED]">news:99bbkk$p8a$[EMAIL PROTECTED]... We have had a pissing match lately and here's the details. One person states that a VLan can not be sniffed because it is on a different subnet. The other person says it can becuase it's physically on the same switch. I think you can to a point. Here's what I mean; let's say we have a 3524 with two Vlans, VLAN1 (we'll call it InfoSys), and VLAN2 (called HR). If I have a sniffer running on InfoSys, I should be able to sniff traffic on my subnet as well as traffic from HR to InfoSys (ie HR employee accessing mail server on InfoSys), right? The only difference is that the source MAC address would change. I should not be able to sniff traffic local to HR (ie an employee accessing accounting software) right? What's the rub? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Urgent Help needed
Hi All I have 3600 series router with 16 line modem installed i am facing problem with one of my line modem ..all modems are configured with group command ..and the configuration is fine i have double checked it from theconfiguration point of view..i suspect some hardware problem in one of my line..i reverse telnetted the line and checked ..using the AT command it shows no carrier...the telephone cable connected is double checked ..can u tell me how can i verify it is the problem before contacting the cisco.Your help will be highly appreciated Regards Arun Sharma _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco 2510 problem
I upgraded IOS to 12.0(7), to upgrade IOS, I took out flash memory from 2510 and put this on my working 2501 router and I was able to upgrade and then I put it back into 2510. But still it's hangs when it checks token ring port. I will send you output of sho ver. Thanks. Arun --- Circusnuts [EMAIL PROTECTED] wrote: By now you have probably figured this out. I cannot imagine a newer image (than 11.2 IP) fitting on 4 Megs of FLASH. My guess is if we could see your Sho Vers, you also have the old version 10.0 boot ROM's. In this instance- if you had the correct FLASH RAM, your router again would lock-up moving to 12.0 (incompatible ROM's). Just assuming ;-) Please let us know if were getting warmer Phil - Original Message - From: "Arun Upadhyay" [EMAIL PROTECTED] To: "Frank Mendoza" [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Wednesday, March 21, 2001 3:38 AM Subject: RE: Cisco 2510 problem It has 8 MB flash and currently it's utilizing only 4MB. --- Frank Mendoza [EMAIL PROTECTED] wrote: Arun, Check that the image's size you are trying to upgrade to will fit into bootflash: Frank. Date: Tue, 20 Mar 2001 20:18:39 -0800 (PST) From: Arun Upadhyay [EMAIL PROTECTED] Subject: Cisco 2510 problem To: [EMAIL PROTECTED] Reply-To: Arun Upadhyay [EMAIL PROTECTED] Hi Friends I have cisco 2510 router that hangs during bootup process when it tries to intialize token ring port. If I bypass the NVRAM, then it works fine. It has IOS 11.2. I tried to upgrade the IOS using serial ports but it failed. It there any way, I can upgrade IOS. Thanks for any help. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Are you a web investor? Free email at http://www.webinvestor.com.au EquityCafe: for web investors. Click here: http://www.equitycafe.com.au = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Facing problem with line configuration on Terminal server
Hi All I have 3600 series router with 16 line modem installed i am facing problem with one of my line modem ..all modems are configured with group command ..and the configuration is fine i have double checked it from theconfiguration point of view..i suspect some hardware problem in one of my line..i reverse telnetted the line and checked ..using the AT command it shows no carrier...the telephone cable connected is double checked ..can u tell me how can i verify it is the problem before contacting the cisco.Your help will be highly appreciated Regards Arun Sharma _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 2510 problem
Hi Friends I have cisco 2510 router that hangs during bootup process when it tries to intialize token ring port. If I bypass the NVRAM, then it works fine. It has IOS 11.2. I tried to upgrade the IOS using serial ports but it failed. It there any way, I can upgrade IOS. Thanks for any help. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco 2510 problem
It has 8 MB flash and currently it's utilizing only 4MB. --- Frank Mendoza [EMAIL PROTECTED] wrote: Arun, Check that the image's size you are trying to upgrade to will fit into bootflash: Frank. Date: Tue, 20 Mar 2001 20:18:39 -0800 (PST) From: Arun Upadhyay [EMAIL PROTECTED] Subject: Cisco 2510 problem To: [EMAIL PROTECTED] Reply-To: Arun Upadhyay [EMAIL PROTECTED] Hi Friends I have cisco 2510 router that hangs during bootup process when it tries to intialize token ring port. If I bypass the NVRAM, then it works fine. It has IOS 11.2. I tried to upgrade the IOS using serial ports but it failed. It there any way, I can upgrade IOS. Thanks for any help. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Are you a web investor? Free email at http://www.webinvestor.com.au EquityCafe: for web investors. Click here: http://www.equitycafe.com.au = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Good Books
Hi Friends Can anyone suggest me good books for my CCIE LAB on 1. Voice over IP and 2. Bidging and DLSw+ Thanks. Arun Upadhyay = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Good Books
_ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Question
Can anybody please help in solving this problem? A router is connected to a T1 line which has the maximum speed of 1.544mbps. The router begins to forward 64bkps packet at 5000 packets per second, there are 500 buffers available. Approximately how long before the link is complelety saturated, the buffers are full and the router begins to discard. Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE question about buffers being used up on router
Hi Priscilla I found the solution. Here it is: 1.544Mbps = 192KB/sec Router begins to forward at the rate of 64KB/sec means it is tranfering at the rate of 3 packets/sec i.e it will take 1/3 sec. or 333 ms to transfer one packet. Now it's getting packets at the rate of 5000 packets/sec i.e one packet in every 1/5000 sec. or 1000/5000 = .2 ms so it will get 500 packets in 500x.2=100 ms So by the time router will forward first packet in 333ms, it's buffer will be full. Thanks for your help. --- Priscilla Oppenheimer [EMAIL PROTECTED] wrote: Oops. I was multiplying 512 bits times 5000 bits per second. I guess I lost a digit. Sorry. Now it's a much more interesting problem! Priscilla At 06:22 PM 10/10/00, Brian wrote: On Tue, 10 Oct 2000, Priscilla Oppenheimer wrote: At 12:01 PM 10/10/00, Arun Upadhyay wrote: Can anybody please help in solving this problem? A router is connected to a T1 line which has the maximum speed of 1.544mbps. The router begins to forward 64bkps packet at 5000 packets per second, Do you mean 64-byte packets? If you convert that to bits it's 512 bits. 5000 packets of that size per second is 560,000 bits per second, which is a lot less than 1.544 Mbps so not much buffereing will be needed at all. You could have just one buffer and no packets should ever get dropped. Priscilla, How did you come up with 560,000 bits per second? Can you break that down for me, I know I must be doing something wrong: 64bytes * 8 = 512 bits 512 bits * 5000 packets = 256 bits brian there are 500 buffers available. How big are the buffers? Can we assume they are 64 bytes also? Approximately how long before the link is complelety saturated, the buffers are full and the router begins to discard. If you are trying to get help with questions like this that appear on the CCIE written test and practice exams, you will want to give us an example of where the WAN link is oversubscribed. For example, if the offered load to the WAN link is 110% more than the WAN link could handle, 500 buffers would get used up in about 5000 packet times. (I think? Comments anyone?) In reality, packets don't arrive at a constant rate, so much more difficult math and queuing theory is required, and that goes beyond the research and thinking I'm willing to do right now. ;-) Priscilla Thanks. Arun = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) Priscilla Oppenheimer http://www.priscilla.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = Arun Upadhyay SE Engineering MCSE CCNA CNA __ Do You Yahoo!? Get Yahoo! Mail - Free email you can access from anywhere! http://mail.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Set up question
Hi Friends I have a question, if someone can help me I will highly appreciate. My office ( HQ ) is having Frame relay connection. Now they want to connect one more branch office with this office using Frame relay .But they want all the branch office people to access internet using the existing Frame relay connection at the HQ office. Now my doubt is , do I need to call only phone company for getting Frame relay line and DLCI no. or I have to also involve ISP . Do I need valid IP from ISP or I can use any private IP address. Thanks in advance for any help. Arun = Arun Upadhyay SE Engineering Merrill Lynch __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
