RE: Passed MCNS today [7:45970]
Well, i read the Cisco press book MCNS and did some hands on with IPSEC VPN and Cisco secure VPN Client. I did not have had a PIX with me so i only did hands on with routers. Plus i did boson test #1. Thats it... Shoaib --- Brian Zeitz wrote: Hello, Can you let me know everything you used to study? Thank you. Brian -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Thursday, June 06, 2002 8:19 PM To: [EMAIL PROTECTED] Subject: Passed MCNS today [7:45970] Hi guys, I just passed MCNS today with 906 marks. Thanks for everybody who helped or tried to help me. chao Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=46123t=45970 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed MCNS today [7:45970]
Hi guys, I just passed MCNS today with 906 marks. Thanks for everybody who helped or tried to help me. chao Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45970t=45970 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CSPFA Advice [7:45985]
Hi guys Can anybody tell me that which book to use to prepare for CSPFA exam of CSS?? I have done with MCNS and for CSPFA, i saw this book in cisco press storeL Cisco Secure PIX Firewalls by David Chapman / Cisco Press / So kindly advice me whether its the right book to go for CSPFA? Any sort of help will be highly appreciated. Thanks Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45985t=45985 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Secure VPN version??? [7:45774]
Hi guys, Can anybody tell me that which version of Cisco Secure VPN client (version 1.0/1.1 OR 3.0/3.51) comes in MCNS exam. I have read the MCNS Cisco press book but i could not find enough material. Later, I was just seeing the Course Outline and found the objectives: Confguring the Cisco secure VPN Client --- 1. Install the Cisco secure VPN client 2. Configure the Cisco secure VPN client 3. Operate the Cisco secure VPN client in a VPN Session 4. Request and import CA Certificates Any sort of help will be highly appreciated. Can anybody tell me which topic to focus on and how much deep we should go in it?? Thanks Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45774t=45774 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: MCNS and boson [7:45499]
thanks for the info, but what is 'Kaeo' which u mentioned? Shoaib --- [EMAIL PROTECTED] wrote: You really don't need the Boson for the MCNS. Just get the book and get Kaeo and read them until you can't read any more and then just pass the test. Oh yeah, get a PIX and configure it! Oh about a VPN concentrator 3060? Radius and TACACS+ interest you? Oh I'm having a bad day today B. :-( Sad Theo Shoaib Waqar Sent by: [EMAIL PROTECTED] 05/31/2002 01:50 PM Please respond to Shoaib Waqar To: [EMAIL PROTECTED] cc: Subject:MCNS and boson [7:45499] Can anybody tell me which boson exam is the best out of 3 test exams available regarding MCNS??? I am gonna purchase any one of the 3 and i m confused, can anybody help? Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45534t=45499 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
boson and MCNS [7:45466]
Hi Guys I am gonna purchase boson tests for MCNS exam, so can anybody tell me out of 3 boson tests, which one is the best? Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45466t=45466 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MCNS and boson [7:45499]
Can anybody tell me which boson exam is the best out of 3 test exams available regarding MCNS??? I am gonna purchase any one of the 3 and i m confused, can anybody help? Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45499t=45499 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MCNS help needed [7:45355]
Hi Fellas, Can anybody provide me some good links, study material besides Cisco press book for MCNS preparation? I have finished the book, now just preparing to go to Testing center. Plus if anyone has got Boson old version 4.23?? Any sort of help will be highly appreciated. Thanks and regards Shoaib __ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45355t=45355 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help needed [7:44360]
In my opinion, these are the default commands entered. While configuring CET, same sort of issue is there and i concluded that these are the default commands. If anyone has got any idea about that? Shoaib --- jc theard wrote: Hi all, I'm configuring a Cisco 2621 for VPN connection. Im typing in the configuration and I dont get any error message but when I want to see my running config, some part of the config are not there here is a part of the IPSEC config I want to have: crypto map vpnmap 50 ipsec-manual set peer 63.104.50.75 set session-key inbound esp 1022521 authenticator 300089000edf100034000edf set session-key outbound esp 235098 authenticator 980001000edf340001000edf set transform-set vpntransform match address 100 Here is what I see after show running-config: crypto map vpnmap 50 ipsec-manual set peer 63.104.50.75 set transform-set vpntransform match address 100 everythg related to session-key is not shown !!?? Does anybody know why it's hidden or deleted?? Thanx a lot jctheard [EMAIL PROTECTED] __ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=44377t=44360 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
MCNS exam material [7:43505]
Hi Guys, I am planning to give my MCNS exam, I have got the Cisco Press MCNS book from Michael Wenstrom. Does anybody know some more material which will be helpful in clearing this exam? Any sort of help will be highly appreciated. Thanks Shoaib __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43505t=43505 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
COLT [7:43435]
Hi guys, Can anybody tell me the URL of Cisco Online Testing which cisco offers at their website? I had this one but i missed it unfortunately. Thanks Shoaib __ Do You Yahoo!? Yahoo! Health - your guide to health and wellness http://health.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43435t=43435 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Written books [7:18477]
Dear All, can anybody tell me the recommended books for the preparation of CCIE written exam. Any idea and thoughts will be appreciated. Shoaib __ Do You Yahoo!? Get email alerts NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=18477t=18477 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
EM port to PBX, busy tone [7:9949]
I have a problem scenario as: I am having a Cisco 3662 router, having 2 port EM VIC. I have configured the EM port with the required parameters from PBX, like type 5, signal immediate and operation 2 wire. I also have created a pots dial peer for this EM port which is connected to the PBX. The PBX make is Alcatel and the code configured on PBX to seize the EM on router is hash symbol and 76. But when i dial this, i get the busy tone, i should get the tone from router. So can anyone help me?? Shoaib __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9949t=9949 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FXS to EM [7:9332]
Can anybody tell me that is it possible to communicate between FXS and EM ports? I have a phone connected to FXS port of a Cisco 2600 router at one of the remote sites. I have the central site having Cisco 3600 with a PBX on its EM port. I want the users calling from FXS port of this remote site to connect their calls to this central site over the WAN to any extenion on the PBX thru EM. Moreover, is it possible that on a virtual trunk circuit, users on a PBX can be denied access to some specifc extensions(phone numbers)and permitted for some specific nos. on the another PBX?? any help will be certainly appreciated, i am waiting. Shoaib Waqar __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9332t=9332 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VIP4-80 help [7:9397]
Hi, as far as i remember, once i had the same problem, VIP was not recognised, and the problem was solved by upgrading the bootstrap software. hope it will solve the problem Shoaib --- Donohue, Steve wrote: Hey Gang, I am wondering if anyone out there has had any problem with the VIP4-80s for 7500 router. I currently am unable to get the VIP recognized by the router. When I look at the diagbus for that slot I receive the following information. Slot 5: Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 0 Internal Instruction Error, Microcode Status 0x0 Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded Board is disabled Pending I/O Status: None EEPROM format version 1 VIP4-80 RM7000 controller, HW rev 2.01, board revision A0 Serial number: 18547357 Part number: 73-3143-03 Test history: 0x00RMA number: 00-00-00 Flags: cisco 7000 board; 7500 compatible EEPROM contents (hex): 0x20: 01 22 02 01 01 1B 02 9D 49 0C 47 03 00 00 00 00 0x30: 50 05 35 00 00 00 00 00 00 00 00 00 00 00 00 00 Slot database information: Flags: 0x201Insertion time: 0x8AE0 (00:18:14 ago) VIP Controller Memory Size: Unknown How do I get this VIP to be analyized, enabled, memory recognized, and the Microcode status to 0X4? Any help would be greatly appreciated. Thanks. Steve [EMAIL PROTECTED] __ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9419t=9397 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Can I have a 2600 T-1 WIC bound to a Dialer interface? [7:5562]
Did u try dialer dtr??? Waqar --- NRF wrote: Consider this. I have 2 2610's, each with a WIC-1DSU T-1 card in them. I have these T-1's connected back to back. I have tried putting IP addreses, using encap ppp, and everything works cool, exactly the way I would expect it to work. So I know the cards and the cable and all that are working fine. Now, I want to try to have the T-1 interfaces invoked via Dialer interfaces. Why? Because eventually I want to get 2 more of these T-1 cards, and install one in each (so each router has 2 of them) and then run ppp multilink where I bond the 2 T-1's together to form a 3 Mb pipe. But I just cannot do it. Specifically, I have tried various ways to get the Dialer interface to bond to the T-1's (Serial 0/0). It never works. For example, I create rotary groups. It doesn't work. Then I try dialer pools. It also doesn't work. Everything I have tried doesn't work. For example, if I try to use dialer pools, then the router demands a dialer string. So I give it a dialer string. The Dialer interface then apparently tries to dial this string, which of couse fails because in a back2back T-1, there is nothing to dial. So if I try a rotary group, somehow the dialer interface never properly seizes the T-1. Instead I get an error like this, whatever the heck it means: r1#ping 192.168.20.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.20.2, timeout is 2 seconds: . Success rate is 0 percent (0/5) r1# 01:25:59: Se0/0 DDR: rotor dialout [priority] 01:26:01: Se0/0 DDR: rotor dialout [priority] 01:26:03: Se0/0 DDR: rotor dialout [priority] 01:26:05: Se0/0 DDR: rotor dialout [priority] 01:26:07: Se0/0 DDR: rotor dialout [priority] OK, now I have seen several CCO examples (for example the examples on PPP multilink) where they put a serial interface (not an ISDN or an async int, but an actual serial interface) under a Dialer interface. But what can I say, it has never worked for me, not once. The only thing that can I can think of is that all those CCO examples use 2500's, whereas I got 2600's here. But it shouldn't matter (or should it?). So, has anybody (especially somebody with a 2600 with a T-1 WIC)ever successfully put a serial interface under a Dialer interface and gotten them to bond correctly ? If so, could you shoot me a config? Thanx FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5562t=5562 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Books for Cisco Security Specialist [7:4668]
Can anyone plz tell me how many books we need for fulfilling the course of Cisco Security Specialist, which contain four exams. There is no book of PIX Firewall available. I m waiting for your suggestions. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4668t=4668 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
3640 down with OIR [7:3781]
I just got my router down, it was 3640, which had been working properly for last 3 months. It gave the following error message and then hung up: %ORINT: OIR Event has occured oir_ctrl 5000 oir_stat 8F8A I know that OIR is Online Insertion and Removal but the strange thing is that nobody inserted or removed any sort of hardware, and to utter astonishment, this msg came and surprised me. I also searched this error on TAC but there r only 4 of these error types OIR and i could not find this one. So any idea about this??? P.S. 3640 has 12.1.8 IP/IPX/AT/DEC plus IOS and 16MB flash, 64 MB DRAM Shoaib __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3781t=3781 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Works 2000 [7:3492]
I think the best source of information regarding CiscoWorks 2000 is Cisco documentation, it gave me a lot of knowledge when i was nill in it. I think u should try finding it on Cisco site. I just have forgotten the link, sorry!! Shoaib CCNP,MCSE --- Tim McCabe wrote: Can anybody recommend a good book for Cisco Works 2000? FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3551t=3492 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
3640 down with OIR [7:3554]
I just got my router down, it was 3640, which had been working properly for last 3 months. It gave the following error message and then hung up: %ORINT: OIR Event has occured oir_ctrl 5000 oir_stat 8F8A I know that OIR is Online Insertion and Removal but the strange thing is that nobody inserted or removed any sort of hardware, and to utter astonishment, this msg came and surprised me. I also searched this eroor on TAC but there r only 4 of these error types OIR and i could not find this one. So any idea about this??? P.S. 3640 has 12.1.8 IP/IPX/AT/DEC plus IOS and 16MB flash, 64 MB DRAM Shoaib __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3554t=3554 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
X21 connectivity with MUX, serial up but , line down [7:3027]
One of my friends adviced me regarding my issue of X21 DTE cable connectivity with MUX, to short pins 3 and 5, and pins 10 and 12 in order to force the CTS up, it worked and serial controller is up on both sides, but the issue is that line protocol is not coming up. The configuration at each router is very simple on their serial interfaces with IP address and encapsulation ppp. I have also confirmed that the two muxes are communicationg well with each other over 64K microwave link. Can anyone plz help out?? Shoaib __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=3027t=3027 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN BRI up but does not ping [7:2712]
Yes, i have tried this also. IT does not work again. The thing is that it connects, and the line protocol becomes UP also, i m using access-list with dialer-group and i have also used floating static routes at both end, now it should work. but it does not work. Shoaib --- El Pingu wrote: ok...i have been through this one. my suggestion. make sure you have an access list associated with dialer-group 1 and on the remote site. put a static route on both sides one on remote to get out and one on central to get you to remote and advertise to your network with a hevier weight than the IGP route if you want to test connectivity make the static more preferable make sure you have a interesting traffic access list or it will not dial. Shoaib Waqar wrote: I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2864t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN BRI up but does not ping [7:2712]
I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2712t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN BRI up but does not ping [7:2712]
Hi Dave, I am using EIGRP as routing protocol, but this will come into account when i have to reach the remote LAN, rite now EIGRP is initiating DDR, i m testing for dial backup, offcourse when the communication will begin, my task would be just to add two commands on the primary link. The issue is that 'show int bri 2/0 1' also shows the bri B channel as UP but the two peers dont ping each other, i think there is no need of a routing protocol rite now at this stage. For pinging to your neighbor of same subnet which is directly connected, u dont need a routing protocol. Now wat to do ??? Shoaib --- [EMAIL PROTECTED] wrote: Hi Shoaib What type of routing protocol are you using ? Have you put the static routes in on both sides ? Can you ping from DIaler to Dialer interface ? Dave Shoaib Waqar To: [EMAIL PROTECTED] yahoo.com Subject: ISDN BRI up but does not ping [7:2712] Sent by: nobody@groups tudy.com 01/05/01 09:15 Please respond to Shoaib Waqar I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS
Re: ISDN BRI up but does not ping [7:2712]
Dear Chong, rite now this is only the testing for DDR, when the sides will start communicationg, offcourse i will be using floating static route for this, the main issue is the ping of neighbor interface , not the LAN address. I think everyone has misunderstood this scenario. Shoaib --- Vincent Chong wrote: 1)It is very obivous, definitely routing problem. since show isdn status is active and up, ppp layer is successful. 2)Define static route to the destintaiton network. Link state protocol is not recommended. For example, Eigrp will trigger your ISDN always up due to protocol characteristic. It will constant exchanger hello packet,. It is not recommended. HTH Vincent Chong Shoaib Waqar wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2728t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN BRI up but does not ping [7:2712]
I have tried dialer profiles, legacy DDR with dialer mao statement and with floating static route too, but still same result, could not ping the neighbor. Offcourse there is a dialer-list statement to initiate call: dialer-list 1 protocol ip permit Shoaib --- Albert Lu wrote: I personally think that using dialer profiles are better than hard coding the interface. It is also true that there is no dialer-list command to dial for interesting traffic, and you don't have a route to use the bri interface so it wouldn't know when to dial. Wouldn't you need a dialer map command for interfaces, rather than specify dialer string? Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shoaib Waqar Sent: Tuesday, 1 May 2001 6:15 To: [EMAIL PROTECTED] Subject: ISDN BRI up but does not ping [7:2712] I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2729t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN BRI up but does not ping [7:2712]
Dear Singh, it is already there. Shoaib --- Vivek Singh wrote: Shoaib, y don't u add static routes...? -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 01, 2001 5:25 PM To: [EMAIL PROTECTED] Subject: Re: ISDN BRI up but does not ping [7:2712] Hi Dave, I am using EIGRP as routing protocol, but this will come into account when i have to reach the remote LAN, rite now EIGRP is initiating DDR, i m testing for dial backup, offcourse when the communication will begin, my task would be just to add two commands on the primary link. The issue is that 'show int bri 2/0 1' also shows the bri B channel as UP but the two peers dont ping each other, i think there is no need of a routing protocol rite now at this stage. For pinging to your neighbor of same subnet which is directly connected, u dont need a routing protocol. Now wat to do ??? Shoaib --- [EMAIL PROTECTED] wrote: Hi Shoaib What type of routing protocol are you using ? Have you put the static routes in on both sides ? Can you ping from DIaler to Dialer interface ? Dave Shoaib Waqar To: [EMAIL PROTECTED] yahoo.com Subject: ISDN BRI up but does not ping [7:2712] Sent by: nobody@groups tudy.com 01/05/01 09:15 Please respond to Shoaib Waqar I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity
RE: ISDN BRI up but does not ping [7:2712]
Yes i also have used an access-list to prevent eigrp to initiate call, and it dials on a ping event, as shown by the 'deb dialer events' shoaib --- Albert Lu wrote: Try using debug dialer events to see if the dialing actually takes place when you ping. If the dialer doesn't come up, then it could be a dialer problem. If it does come up, and dialing fails, then it could be an isdn problem. Albert -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 1 May 2001 9:54 To: Albert lu Cc: [EMAIL PROTECTED] Subject: RE: ISDN BRI up but does not ping [7:2712] I have tried dialer profiles, legacy DDR with dialer mao statement and with floating static route too, but still same result, could not ping the neighbor. Offcourse there is a dialer-list statement to initiate call: dialer-list 1 protocol ip permit Shoaib --- Albert Lu wrote: I personally think that using dialer profiles are better than hard coding the interface. It is also true that there is no dialer-list command to dial for interesting traffic, and you don't have a route to use the bri interface so it wouldn't know when to dial. Wouldn't you need a dialer map command for interfaces, rather than specify dialer string? Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shoaib Waqar Sent: Tuesday, 1 May 2001 6:15 To: [EMAIL PROTECTED] Subject: ISDN BRI up but does not ping [7:2712] I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. Shoaib CCNP,MCSE __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2733t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN BRI up but does not ping [7:2712]
I have traced the route as well, the data is not passing across the ISDN link. I also have used extended ping, but it does not ping. Shoaib --- Albert Lu wrote: Do you know whether data is going across the link at all? Try a trace to the other side, and see what route the packet takes. Albert -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 1 May 2001 10:15 To: Albert lu Cc: [EMAIL PROTECTED] Subject: RE: ISDN BRI up but does not ping [7:2712] Yes i also have used an access-list to prevent eigrp to initiate call, and it dials on a ping event, as shown by the 'deb dialer events' shoaib --- Albert Lu wrote: Try using debug dialer events to see if the dialing actually takes place when you ping. If the dialer doesn't come up, then it could be a dialer problem. If it does come up, and dialing fails, then it could be an isdn problem. Albert -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 1 May 2001 9:54 To: Albert lu Cc: [EMAIL PROTECTED] Subject: RE: ISDN BRI up but does not ping [7:2712] I have tried dialer profiles, legacy DDR with dialer mao statement and with floating static route too, but still same result, could not ping the neighbor. Offcourse there is a dialer-list statement to initiate call: dialer-list 1 protocol ip permit Shoaib --- Albert Lu wrote: I personally think that using dialer profiles are better than hard coding the interface. It is also true that there is no dialer-list command to dial for interesting traffic, and you don't have a route to use the bri interface so it wouldn't know when to dial. Wouldn't you need a dialer map command for interfaces, rather than specify dialer string? Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shoaib Waqar Sent: Tuesday, 1 May 2001 6:15 To: [EMAIL PROTECTED] Subject: ISDN BRI up but does not ping [7:2712] I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. === message truncated === __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2791t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN BRI up but does not ping [7:2712]
I have traced the route as well, the data is not passing across the ISDN link. I also have used extended ping, but it does not ping. Shoaib --- Albert Lu wrote: Do you know whether data is going across the link at all? Try a trace to the other side, and see what route the packet takes. Albert -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 1 May 2001 10:15 To: Albert lu Cc: [EMAIL PROTECTED] Subject: RE: ISDN BRI up but does not ping [7:2712] Yes i also have used an access-list to prevent eigrp to initiate call, and it dials on a ping event, as shown by the 'deb dialer events' shoaib --- Albert Lu wrote: Try using debug dialer events to see if the dialing actually takes place when you ping. If the dialer doesn't come up, then it could be a dialer problem. If it does come up, and dialing fails, then it could be an isdn problem. Albert -Original Message- From: Shoaib Waqar [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 1 May 2001 9:54 To: Albert lu Cc: [EMAIL PROTECTED] Subject: RE: ISDN BRI up but does not ping [7:2712] I have tried dialer profiles, legacy DDR with dialer mao statement and with floating static route too, but still same result, could not ping the neighbor. Offcourse there is a dialer-list statement to initiate call: dialer-list 1 protocol ip permit Shoaib --- Albert Lu wrote: I personally think that using dialer profiles are better than hard coding the interface. It is also true that there is no dialer-list command to dial for interesting traffic, and you don't have a route to use the bri interface so it wouldn't know when to dial. Wouldn't you need a dialer map command for interfaces, rather than specify dialer string? Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Shoaib Waqar Sent: Tuesday, 1 May 2001 6:15 To: [EMAIL PROTECTED] Subject: ISDN BRI up but does not ping [7:2712] I am getting trouble in ISDN bri link. I have a Central site Router 3640 with 12.1.8 IP/IPX plus IOS. the route has 4 port BRI module. The remote site is having 2503, all u know that it has 1 port BRI. remote site is running 11.2.1 version of IOS. The call is placed using simple DDR commands as: Cisco 3640 Router = Int bri 2/0 ip add 130.1.1.1 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 dialer string dialer-group 1 Remote site (2503): === Int bri 0 ip add 130.1.1.2 255.255.255.0 encap ppp dialer idle-timeout 300 dialer fast-idle 300 In this scenario, a/c to customer need, the central site is placing call.When the call has placed, and we see the debug output, it shows all the debug of ppp negotiations and ISDN events as correct, with the install route at the end. When i run 'show isdn status' it shows me all layers up with one active layer 3 call also. Also 'show isdn active' gives me successful call to remote site. So nothing seems to be wrong with config. THE problem is that after connectivity when i try to ping from central site the remote site ip address, it times out. I took the 'show ip route', and it gives me only connected routes but dont show me the remote LAN network address of each site which it should give as i m running EIGRP at both sites. The primary link is working correctly as i have an SCPC 128K link between the two sites as well and showing correct routes. The switch type in pakistan normally we use is basic-net3 (SIEMENS switch). Can anyone plzz help me, where is the issue?? i have tried everything, dialer profiles and all. but nothing seems to be working, i cant ping the other side thru BRI. === message truncated === __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2790t=2712 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: X21 interconnectivity issue with MUX [7:2398]
Well, certainly i m aware of the fact that both DCD and CTS are originated by DCE, but the thing is that how to get CTS if its not provided by MUX, can anyone tell that how to make it on MUX, anyone have clue?? Plus the MUXes link is Microwave link of 64K and a/c to the MUX expert, the MUXes are communicating well. Shoaib --- Gareth Hinton wrote: Long time since I've messed with the Mux's, but thought I'd have a go as replies seem to be a little scarce. At the very worst you can console yourself with the fact that you're not the only one who hasn't got a clue. Not sure whether you were aware that both CTS and DCD are both originated by the DCE, and depending on the flow control set up, are reliant on the distand end MUX. Do you have a good circuit to the distant mux? Or, do you have a X21 breakout box so you can force DCD and CTS to see if this brings the circuit up. Failing that you could connect DTR to DCD and CTS at the router to see if that brings it up. So in answer to your question, CTS being low, probably isn't the reason for DCD being low. It is more likely that there is a problem with the MUX config or the link which is causing both to be low. Regrds, Gareth Shoaib Waqar wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear All, I am currently experiencing a issue regarding connectivity of Cisco Router 2511 with Multiplexer (MUX) which is acting as a DCE device. The MUX is providing clock, as it is shown at router's console by entering 'show controller ser 0' but the DCD never comes up. I have checked the pin configuration by surfing on Cisco cable specification doc of X21 DTE cable(DB15 connector) and found that the cable is not getting CTS from MUX, so am i rite in guessing that this might be the main cause of DCD not coming up?? can anyone plz help ?? i will highly appreciate it Shoaib Waqar CCNP,MCSE,CIPT __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2464t=2398 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
X21 interconnectivity issue with MUX [7:2398]
Dear All, I am currently experiencing a issue regarding connectivity of Cisco Router 2511 with Multiplexer (MUX) which is acting as a DCE device. The MUX is providing clock, as it is shown at router's console by entering 'show controller ser 0' but the DCD never comes up. I have checked the pin configuration by surfing on Cisco cable specification doc of X21 DTE cable(DB15 connector) and found that the cable is not getting CTS from MUX, so am i rite in guessing that this might be the main cause of DCD not coming up?? can anyone plz help ?? i will highly appreciate it Shoaib Waqar CCNP,MCSE,CIPT __ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2398t=2398 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Confusion
Anyone of u can tell me that i read on the official web site of cisco regarding CCNP cert, than it can also be achieved by a mixture of CCNP 1.0 and 2.0 tracks, that is if one got ACRC and CLSC of 1.0 track and Remote Access and Support 2.0 of CCNP 2.0 then u will be certifie as CCNP 1.0, so plz tell me about it, is it really what i am understanding??? Regards, Shoaib Waqar Get free email and a permanent address at http://www.netaddress.com/?N=1 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing 2.0-BSCN
Dear All, Can anyone tell me the detailed outline course of the CCNP 2.0 forth coming track regarding routing 2.0? Also when the new track is going to be tested at Sylvan Prometric centers? is it 30th June, 2000? I am waiting for the reply Regards, Shoaib Waqar Thanks and regards, Shoaib Waqar Network Engineer Bachelors of Engineering in Computer Systems(B.E.CS), MCP+I,MCSE,CCNA Sysnet Pakistan Pvt. Ltd. Get free email and a permanent address at http://www.netaddress.com/?N=1 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ACRC-BSCN-TEST
Dear All, Can anyone tell me that when the testing of Routing 2.0 regarding CCNP track 4.0 will be started? is it 30th June 2000? Shoaib Thanks and regards, Shoaib Waqar Network Engineer Bachelors of Engineering in Computer Systems(B.E.CS), MCP+I,MCSE,CCNA Sysnet Pakistan Pvt. Ltd. Get free email and a permanent address at http://www.netaddress.com/?N=1 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ACRC completed, CLSC????
Hello dear fellows, This is my first mail to this nice mailing list. I am on CCNP 1.0 track, and i will try to complete it before 31st july, 2000. This list really helped me to pass my ACRC 11.3 exam today with 863 marks, the passing score was 790. If anyone has any sort of help in giving the exam , he may contact me through my email. Offcourse without a nice text book like Laura Chappel's ACRC 11.3 and official ACRC cisco text book, i might not have completed this certification. Well, my next target is CLSC, can anyone help me out on this, some tips?? any study guides?? as it has no text book at all?. Any comments will be appreciated on this. Thanks Shoaib Waqar Network Engineer B.E.Computer Systems, MCP+I,MCSE,CCNA Karachi, Pakistan Get free email and a permanent address at http://www.netaddress.com/?N=1 ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
