Bug#364637: additional info
Bug is still present as of the daily image from 5/3/06 (closed bug 365844) --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365730: corrupt nvram caused problem, not related to 'via-pmu: Server Mode'
Problem appears to be nvram corruption. Reset nvram from Open Firmware reset-nvram set-defaults reset-all (same procedure commonly used to 'repair' failing firewire and usb ports). Subsequent attempt to boot 5/3/06 daily image made it to the 'Trying to im_free...' hang from bug Bug#365844. --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365730: corrupt nvram caused problem, not related to 'via-pmu: Server Mode'
I tried the usb again, and the crash came back but this time reset-nvram won't clear it. For now, I am going to assume there is just something flaky about this box, since the other xserves behave themselves. But I don't want to risk using the usb ports on the other xserves since that appears to be the trigger. Thanks, Toni. On Thu, 4 May 2006, Frans Pop wrote: merge 365730 364637 thanks On Thursday 04 May 2006 13:52, Toni L. Harbaugh-Blackford [Contr] wrote: Subsequent attempt to boot 5/3/06 daily image made it to the 'Trying to im_free...' hang from bug Bug#365844. That should be #364637 (as #365844 was closed because it was a duplicate). As it now seems the two reports have the same cause, I'm merging them. --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365844: installation report
Package: installation-reports Boot method: external firewire cd Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 5/3/06) Date: 5/03/06 06:45 Machine: Xserve G5 cluster node (headless), external firewire, serial console only Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06) Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: Installer hangs at 'Trying to im_free nonexistent area (d800820d7000)'. Possibly due to conflict between serial drivers. pmac_zilog needs to manage the console on this model, but it is blocked by the 8250/16550 driver. Console log: Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06 Copyright 1994-2004 Apple Computer, Inc. All Rights Reserved. Welcome to Open Firmware, the system time and date is: 10:41:12 05/03/2006 To continue booting, type mac-boot and press return. To shut down, type shut-down and press return. ok 0 dev fw ls ff9f19f8: /[EMAIL PROTECTED] ff9f1bf0: /[EMAIL PROTECTED] ff9f1e38: /[EMAIL PROTECTED] ok 0 devalias cd /ht/[EMAIL PROTECTED]/firewire/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] ok 0 dir cd:,\ sbp2:Open -login? speed= 2 2 - Debian/PowerPC_etch Size/GMT File/Dir bytes date time TYPE CRTRName 1/ 1/ 4 0: 0: 0 .disk 1/ 1/ 4 0: 0: 0 dists 1/ 1/ 4 0: 0: 0 doc 1/ 1/ 4 0: 0: 0 etc 1/ 1/ 4 0: 0: 0*install 52082 5/ 3/ 6 3: 4:56 md5sum.txt 1/ 1/ 4 0: 0: 0 pics 1/ 1/ 4 0: 0: 0 pool 1/ 1/ 4 0: 0: 0 ppc 10293 5/ 3/ 6 3: 4:23 README.html 72856 4/28/ 6 20:52:21 README.mirrors.html 39983 4/28/ 6 20:52:21 README.mirrors.txt 5327 5/ 3/ 6 3: 4:23 README.txt 1/ 1/ 4 0: 0: 0 tools ok 0 boot cd:,\install\yaboot sbp2:Open -login? speed= 2 2 load-size=248ec adler32=881546ed Loading ELF sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 Config file read, 1138 bytes sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 \ sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 Welcome to Debian GNU/Linux etch! This is a Debian installation CDROM, built on 20060503. The default option is 'install'. For maximum control, you can use the 'expert' option. If the system fails to boot at all (the typical symptom is a white screen which doesn't go away), use 'install video=ofonly' or 'expert video=ofonly'. The plain options are for the powerpc family of processors (from 601 to G4). The *64 options are for 64bit powerpc processors, which include the IBM Power3, Power4, Power5, ... boxes, as well as the Apple G5 boxes. Press the tab key for a list of options, or type 'help' for help. If in doubt, just choose 'install', and if that doesn't work, try 'install video=ofonly'. Welcome to yaboot version 1.3.13 Enter help to get some basic usage information sbp2:Open -login? speed= 2 2 boot: * installexpert install64 expert64 boot: expert64 video=ofonly console=ttyS0,57600 debug dobladecenter Please wait, loading kernel... sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2Elf64 kernel loaded... Loading ramdisk... sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open
Bug#365859: installation report - same image and method, different xserve (identical model), different result
Package: installation-reports Boot method: external firewire cd Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 5/3/06) Date: 5/03/06 07:45 Machine: Xserve G5 cluster node (headless), external firewire, serial console only (different box from Bug#365844, but identical) Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06) Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: Boot crashes right after 'core99_setup_cpu 0 done' message. Note that this installation attempt was identical to that in Bug#365844. A different Xserve box was used, although an identical model to the box in Bug#365844 (both are members of the same Xserve cluster). The only difference between the two machines is that the USB ports in this one have been used, whereas the USB ports in the box from Bug#365844 have never been touched. NO USB devices were plugged in at the time of the attempt. The only external device was the firewire cd. Note also that this box and all it's ports work fine under Mac OS X See Bug#365730, which may be a duplicate. Console log: Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06 Copyright 1994-2004 Apple Computer, Inc. All Rights Reserved. Welcome to Open Firmware, the system time and date is: 11:01:37 05/03/2006 To continue booting, type mac-boot and press return. To shut down, type shut-down and press return. ok 0 dev fw ls ff9f1a68: /[EMAIL PROTECTED] ff9f1c60: /[EMAIL PROTECTED] ff9f1ea8: /[EMAIL PROTECTED] ok 0 devalias cd /ht/[EMAIL PROTECTED]/firewire/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] ok 0 dir cd:,\install sbp2:Open -login? speed= 2 2 - Size/GMT File/Dir bytes date time TYPE CRTRName 781 5/ 3/ 6 3: 4:23 boot.msg 1855 5/ 3/ 6 3: 4:23 tbxi UNIX ofboot.b 2319 5/ 3/ 6 3: 4:23 pegasos 1/ 1/ 4 0: 0: 0 powerpc 1/ 1/ 4 0: 0: 0 powerpc64 149740 3/ 2/ 6 16:11: 8 boot UNIX yaboot 1138 5/ 3/ 6 3: 4:23 conf UNIX yaboot.conf ok 0 boot cd:,\install\yaboot sbp2:Open -login? speed= 2 2 load-size=248ec adler32=881546ed Loading ELF sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 Config file read, 1138 bytes sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 \ sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 Welcome to Debian GNU/Linux etch! This is a Debian installation CDROM, built on 20060503. The default option is 'install'. For maximum control, you can use the 'expert' option. If the system fails to boot at all (the typical symptom is a white screen which doesn't go away), use 'install video=ofonly' or 'expert video=ofonly'. The plain options are for the powerpc family of processors (from 601 to G4). The *64 options are for 64bit powerpc processors, which include the IBM Power3, Power4, Power5, ... boxes, as well as the Apple G5 boxes. Press the tab key for a list of options, or type 'help' for help. If in doubt, just choose 'install', and if that doesn't work, try 'install video=ofonly'. Welcome to yaboot version 1.3.13 Enter help to get some basic usage information sbp2:Open -login? speed= 2 2 boot: * installexpert install64 expert64 boot: expert64 video=ofonly console=ttyS0,57600 debug dobladecenter Please wait, loading kernel... sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2Elf64 kernel loaded... Loading ramdisk... sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 sbp2:Open -login? speed= 2 2 ramdisk loaded at 01a0, size: 3565 Kbytes OF stdout device is: /[EMAIL PROTECTED],f200/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc --
Bug#365859: found difference between boot logs of the two xserves
I found a difference between the boot logs of this xserve and the one in Bug#365844. For some reason, linux views this xserve as having 'via-pmu: Server Mode is disabled' # diff netinst20060503.log.node03 netinst20060503.log.node01 22,23d21 speed= 2 2 \ sbp2:Open -login? 25a24,25 speed= 2 2 \ sbp2:Open -login? 144c144 -via-pmu: Server Mode is disabled --- via-pmu: Server Mode is enabled 147c147 nvram: gen0=116, gen1=115 --- nvram: gen0=198, gen1=197 194c194 -via-pmu: Server Mode is disabled --- via-pmu: Server Mode is enabled 197c197 nvram: gen0=116, gen1=115 --- nvram: gen0=198, gen1=197 247,281c247,276 -Unable to handle kernel paging request for data at address 0xc0007c4d7480 Faulting instruction address: 0xc002cc80 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA POWERMAC Modules linked in: . . . why would attaching a USB device turn change the behavior of the pmu? --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365703: ntpdate: time is not set for no apparent reason
are the (government) official time servers here in Germany. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages ntpdate depends on: ii libc6 2.3.6-7GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. ntpdate recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365730: installation report (try 2)
Package: installation-reports Boot method: usb flash drive (two different models attempted) Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (from 4/1/06) Date: 5/02/06 07:20 Machine: Xserve G5 cluster node (headless), usb flash drive Processor: Dual PowerPC970 (Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06) Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: Installer crashes with an oops, 'Unable to handle kernel paging request'. Crash at same place in boot with two different usb sticks, but different tasks and locations listed in the stack trace, which is strange. Console log with Kingston DataTraveler: Apple RackMac3,1 5.1.7f0 BootROM built on 05/06/04 at 15:57:06 Copyright 1994-2004 Apple Computer, Inc. All Rights Reserved. Welcome to Open Firmware, the system time and date is: 10:59:53 05/02/2006 To continue booting, type mac-boot and press return. To shut down, type shut-down and press return. 0 dev /ht/[EMAIL PROTECTED] ls ff9b1b98: /[EMAIL PROTECTED] ff9f1a70: /[EMAIL PROTECTED] ff9b9bd0: /[EMAIL PROTECTED],1 ff9c1c08: /[EMAIL PROTECTED],2 ok 0 devalias cd /ht/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] ok 0 dir cd:,\ - Debian/PowerPC_etch Size/GMT File/Dir bytes date time TYPE CRTRName 1/ 1/ 4 0: 0: 0 .disk 1/ 1/ 4 0: 0: 0 dists 1/ 1/ 4 0: 0: 0 doc 1/ 1/ 4 0: 0: 0 etc 1/ 1/ 4 0: 0: 0*install 51259 4/21/ 6 2:21:19 md5sum.txt 1/ 1/ 4 0: 0: 0 pics 1/ 1/ 4 0: 0: 0 pool 1/ 1/ 4 0: 0: 0 ppc 10293 4/21/ 6 2:20:46 README.html 72722 1/13/ 6 21:52:32 README.mirrors.html 39849 1/13/ 6 21:52:32 README.mirrors.txt 5327 4/21/ 6 2:20:46 README.txt 1/ 1/ 4 0: 0: 0 tools ok 0 dir cd:,\install \ SOF timeout Size/GMT File/Dir bytes date time TYPE CRTRName 781 4/21/ 6 2:20:47 boot.msg 1855 4/21/ 6 2:20:47 tbxi UNIX ofboot.b 2319 4/21/ 6 2:20:47 pegasos 1/ 1/ 4 0: 0: 0 powerpc 1/ 1/ 4 0: 0: 0 powerpc64 149740 3/ 2/ 6 16:11: 8 boot UNIX yaboot 1138 4/21/ 6 2:20:47 conf UNIX yaboot.conf ok 0 boot cd:,\install\yaboot load-size=248ec adler32=881546ed Loading ELF Config file read, 1138 bytes Welcome to Debian GNU/Linux etch! This is a Debian installation CDROM, built on 20060421. The default option is 'install'. For maximum control, you can use the 'expert' option. If the system fails to boot at all (the typical symptom is a white screen which doesn't go away), use 'install video=ofonly' or 'expert video=ofonly'. The plain options are for the powerpc family of processors (from 601 to G4). The *64 options are for 64bit powerpc processors, which include the IBM Power3, Power4, Power5, ... boxes, as well as the Apple G5 boxes. Press the tab key for a list of options, or type 'help' for help. If in doubt, just choose 'install', and if that doesn't work, try 'install video=ofonly'. Welcome to yaboot version 1.3.13 Enter help to get some basic usage information WARNING: Bootstrap partition type is wrong: Apple_HFS type should be: Apple_Bootstrap boot: * installexpert install64 expert64 boot: expert64 debug Please wait, loading kernel... Elf64 kernel loaded... Loading ramdisk... ramdisk loaded at 01a0, size: 3522 Kbytes OF stdout device is: /[EMAIL PROTECTED],f200/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] command line: ro ramdisk_size=10240 DEBCONF_PRIORITY=low devfs=mount,dall init=/linuxrc -- debug memory layout at init: memory_limit : (16 MB aligned) alloc_bottom : 01d71000 alloc_top: 2000
Bug#365735: rsync: performance problem
Package: rsync Version: 2.6.8-2 Severity: normal Hello, I am experiencing a performance problem rsync'ing from one machine to another in my LAN. The LAN is 100MBit/s Ethernet, idle, and the two machines are also mostly idle, with rsync + ssh together using less than 15% CPU on the slower machine, and some 3% on average on the faster (receiving) machine. The drives are U160 or U320 in the sender machine, and SATA in the other. Therefore, I expect the network to be saturated by the transfer. But in reality, I get a varying transfer rate between some 200KB/s and 7MB/s, with some 500KB/s on average (over hours, I'm trying to transfer some 50 gigs). When I transfer large, already compressed, files or ISOs, transfer is abysmally slow, and when I transfer lots of small files, performance soars. I have RSYNC_RSH=ssh on both ends, and transfer using rsync -av (note: not -u, not -z) in order to minimize CPU usage. But the drive lights also don't indicate much activity. What gives? And why is transfer over a WAN consistently fast enough to saturate my WAN link(s), ie, faster than in my LAN (but using different data)? Best, --Toni++ PS: Not tagging minor because of the impact this problem has for me. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages rsync depends on: ii libc6 2.3.6-7GNU C Library: Shared libraries ii libpopt0 1.7-5 lib for parsing cmdline parameters rsync recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365730: installation report (try 2)
On Tue, 2 May 2006, Frans Pop wrote: reassign 365730 linux-2.6 retitle 365730 [powerpc] [d-i] Oops when booting from usb flash drive thanks On Tuesday 02 May 2006 14:07, Toni L. Harbaugh-Blackford [Contr] wrote: Comments/Problems: Installer crashes with an oops, 'Unable to handle kernel paging request'. Crash at same place in boot with two different usb sticks, but different tasks and locations listed in the stack trace, which is strange. Reassigning to the kernel team as they know more about oopses than us simple installer folk. The installation report contains loads of detailed info. This may be user error though as I would expect booting from usb stick to require a hd-media image (like for i386), though I'm not sure of that. I would do this but the hd-media for ppc is only the 32bit one. Does it matter? I have booted other cd images from the usb stick on ppc. It seems to work as long as the 'cd' driver gets mapped ok. Toni: You may also want to try with a new daily build of the installer which uses a 2.6.16 kernel. Note that the powerpc cd builds have been broken for a while, but we expect to get (finally) new ones in tonight's run, so check the date before you download. Will they have the zilog serial issue fixed? Thanks, Toni --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365010: Xserver G5 usb keyboard not loaded ...
On Thu, 27 Apr 2006, Andreas Barth wrote: * Sven Luther ([EMAIL PROTECTED]) [060427 13:23]: On Thu, Apr 27, 2006 at 12:53:12PM +0200, Frans Pop wrote: On Thursday 27 April 2006 12:14, Sven Luther wrote: 1) daily build business card and netinst isos are failing to build since april 1, which means they don't include the broadcom tg3 module at all, and are thus not really usable for installs at this time. Reason is that prep and chrp d-i cdrom images are failing in daily d-i builds. This results in debian-cd not being able to find a file needed for mkisofs. I understand from comments on IRC that this is due to a kernel issue? Oh fun, i don't have any commit access to the d-i repo anymore, so i can't even fix this issue myself. This clearly shows the pettiness of the d-i team, i am disgusted. ... Dear fellow powerpc folk, this clearly means that the debian support for powerpc is dead or almost so, and i strongly recomend you to go find another distribution to run which cares a bit more about the powerpc architecture. I'd rather prefer if you don't overexegerate. I'm not sure he's exagerating. There has been a grave silence about the daily images not building, for anyone who doesn't access IRC anyway. I would have expected to see some mention of it on the list so people who don't stay on IRC (and people who are only interested in the ppc architecture) would know what was going on. Thanks, Toni --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364632: category correction
I did not fill in the checklist correctly. The first five entries should have been: Initial boot worked:[O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [O] since the initial boot worked. Also, all the modules loaded *except* sbp2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364632: (no subject)
Package: installation-reports Boot method: cd Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (downloaded today [4/24/06], but date of image is still 4/1/06) Date: 4/24/06 11:30 Machine: Xserve G5 cluster node (headless), external firewire cdrom Processor: PowerPC970 Memory: 2GB Partitions: none yet; testing installer bootability Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: The kernel used for the debian installer does not have the sbp2 module built correctly. From a shell attempting to load the sbp2 module generates the following error: ~ # modprobe sbp2 FATAL: Error inserting sbp2 (/lib/modules/2.6.15-1-powerpc64/kernel/drivers/ieee1394/sbp2.ko): Unknown symbol in module, or unknown parameter (see dmesg) ~ # dmesg | tail sbp2: Unknown symbol bus_to_virt Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. sbp2: Unknown symbol bus_to_virt sbp2: Unknown symbol bus_to_virt sbp2: Unknown symbol bus_to_virt Floppy drive(s): fd0 is 2.88M Floppy drive(s): fd0 is 2.88M sbp2: Unknown symbol bus_to_virt Is there a newer debian-installer kernel available which has this bug fixed? (I think it is fixed in 2.6.15-8). Also, why is the date of the daily image old? Thanks, Toni -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364637: (no subject)
PROTECTED] channel 0 bus multibus PMU i2c /[EMAIL PROTECTED],f200/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/pmu-i2c channel 1 bus multibus channel 2 bus multibus Processor timebase sync using Pulsar i2c clock requesting IPIs ... IPIs requested... smp_core99_kick_cpu smp_core99_kick_cpu done Processor 1 found. Brought up 2 CPUs core99_setup_cpu 0 done migration_cost=685 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4652k freed NET: Registered protocol family 16 Linux ppc64 #2 SMP Mon Apr 10 18:55:49 CEST 2006 PCI: Probing PCI hardware mapping IO f000 - d840, size: 80 mapping IO f400 - d800, size: 40 PCI: Probing PCI hardware done nvram_init: Could not find nvram partition for nvram buffered error logging. audit: initializing netlink socket (disabled) audit(1145894141.991:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered HVSI: registered 0 devices Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pmac_zilog: 0.6 (Benjamin Herrenschmidt [EMAIL PROTECTED]) pmac_zilog: Error registering serial device, disabling pmac_zilog. pmac_zilog: Did another serial driver already claim the minors? Trying to im_free nonexistent area (d800820d7000) Thanks, Toni -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363595: bazaar: adding precious files to source fails
Package: bazaar Version: 1.4.2-2 Severity: normal Hello, I have a number of files which are implicitly tagged as precious, but - in one directory - wanted to add them to source (baz add *). After that, the tree is no longer lint-clean: $ baz lint These explicit ids have no corresponding file: Startseite/.arch-ids/Frame_7.xcf.id Startseite/.arch-ids/Frame_7a.xcf.id Startseite/.arch-ids/Frame_8.xcf.id Startseite/.arch-ids/Frame_9.xcf.id Startseite/.arch-ids/Frame_9a.xcf.id Doing an inventory $ baz inventory|grep xcf P Frame_7.xcf P Frame_7a.xcf P Frame_8.xcf P Frame_9.xcf P Frame_9a.xcf shows that the files are there. I'd expect to have the manual 'add' override the default value of 'P' and convert it to 'S' (I think tla does it that way). Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages bazaar depends on: ii diff 2.8.1-11 File comparison utilities ii gawk 1:3.1.5-2 GNU awk, a pattern scanning and pr ii libc6 2.3.6-3 GNU C Library: Shared libraries an ii libgpgme11 1.1.0-1 GPGME - GnuPG Made Easy ii libneon24 0.24.7.dfsg-3 An HTTP and WebDAV client library ii libssl0.9.80.9.8a-7 SSL shared libraries ii patch 2.5.9-4 Apply a diff file to an original bazaar recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#362215: xcdroast: would like a handle to resize the two right windows in 'write tracks'
Package: xcdroast Version: 0.98+0alpha15-3.1 Severity: wishlist Hello, in xcdroast - Create CD - Write Tracks, there are two windows to the right of the left vertical menu, one titled 'Tracks to write', and one titled 'Image-Information'. I'd like to have a handle on the vertical bar that separates these two windows to resize them. You can see similar things in jpilot and xpdf, though for different toolkits. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages xcdroast depends on: ii cdda2wav 4:2.01+01a03-5 Creates WAV files from audio CDs ii cdrecord 4:2.01+01a03-5 command line CD writing tool ii debconf [debconf-2.0] 1.4.71 Debian configuration management sy ii libatk1.0-0 1.10.3-1 The ATK accessibility toolkit ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libcairo2 1.0.2-3The Cairo 2D vector graphics libra ii libfontconfig12.3.2-2generic font configuration library ii libglib2.0-0 2.10.1-2 The GLib library of C routines ii libgtk2.0-0 2.8.13-1 The GTK+ graphical user interface ii libpango1.0-0 1.12.0-2 Layout and rendering of internatio ii libpcre3 6.4-1.1Perl 5 Compatible Regular Expressi ii libx11-6 6.9.0.dfsg.1-4 X Window System protocol client li ii libxcursor1 1.1.3-1X cursor management library ii libxext6 6.9.0.dfsg.1-4 X Window System miscellaneous exte ii libxi66.9.0.dfsg.1-4 X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-4 X Window System multi-head display ii libxrandr26.9.0.dfsg.1-4 X Window System Resize, Rotate and ii libxrender1 1:0.9.0.2-1X Rendering Extension client libra ii makedev 2.3.1-80 creates device files in /dev ii mkisofs 4:2.01+01a03-5 Creates ISO-9660 CD-ROM filesystem xcdroast recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307186: the request is valid
Hello lamont, On Sat, 08.04.2006 at 15:16:28 -0600, LaMont Jones [EMAIL PROTECTED] wrote: On Sat, Apr 08, 2006 at 09:30:30PM +0200, Toni Mueller wrote: I have a very similar requirement like Hadmut (until I can throw Postfix out), and request that you please fix the problem. More specifically, section 11.6 of Debian policy says: ... all MTA packages must have Provides, Conflicts and Replaces: mail-transport-agent control file fields. thanks for the explanation, but the bigger problem is that the Postfix package is built in a way that effectively prevents installing another MTA using --force alongside Postfix because sendmail is not a symlink as it is in many other MTAs, but a binary, and the effects of displacing that are unpredictable (to me). If it were, eg. sendmail.postfix alongside a symlink from sendmail to sendmail.postfix and Postfix internal programs would use the name 'sendmail.postfix', I probably wouldn't have a problem. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361669: openssh-server: glibc detected - double free or corruption (prebanner crash)
Package: openssh-server Version: 1:4.2p1-7 Severity: grave Justification: renders package unusable When I start the SSH service, it boots fine and doesn't say anything strange. However, when I connect to it, the child process serving the connection crashes pre-banner (just after the connection is established, before the SSH server says anything). If I run it in debug mode, it says: debug2: fd 3 setting O_NONBLOCK debug3: privsep user:group 101:65534 debug1: permanently_set_uid: 101/65534 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug3: mm_request_send entering: type 37 debug3: mm_request_receive_expect entering: type 38 debug3: mm_request_receive entering debug2: Network child is on pid 4163 debug3: preauth child monitor started debug3: mm_request_receive entering debug3: monitor_read: checking request 37 *** glibc detected *** double free or corruption (!prev): 0x0809c058 *** /etc/init.d/ssh: line 37: 4162 Aborted start-stop-daemon --star t --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS And here's another debug mode run: debug3: privsep user:group 101:65534 debug1: permanently_set_uid: 101/65534 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug3: mm_request_send entering: type 37 debug3: mm_request_receive_expect entering: type 38 debug3: mm_request_receive entering debug2: Network child is on pid 1557 debug3: preauth child monitor started debug3: mm_request_receive entering debug3: monitor_read: checking request 37 *** glibc detected *** double free or corruption (!prev): 0x0809c060 *** /etc/init.d/ssh: line 37: 1556 Aborted start-stop-daemon --star t --quiet --pidfile /var/run/sshd.pid --exec /usr/sbin/sshd -- $SSHD_OPTS debug1: do_cleanup debug1: PAM: cleanup debug3: PAM: sshpam_thread_cleanup entering -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages openssh-server depends on: ii adduser 3.85 Add and remove users and groups ii debconf [debc 1.4.72 Debian configuration management sy ii dpkg 1.13.17package maintenance system for Deb ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libcomerr21.38+1.39-WIP-2005.12.31-1 common error description library ii libkrb53 1.4.3-6MIT Kerberos runtime libraries ii libpam-module 0.79-3.1 Pluggable Authentication Modules f ii libpam-runtim 0.79-3.1 Runtime support for the PAM librar ii libpam0g 0.79-3.1 Pluggable Authentication Modules l ii libselinux1 1.30-1 SELinux shared libraries ii libssl0.9.8 0.9.8a-7 SSL shared libraries ii libwrap0 7.6.dbs-9 Wietse Venema's TCP wrappers libra ii openssh-clien 1:4.2p1-7 Secure shell client, an rlogin/rsh ii zlib1g1:1.2.3-11 compression library - runtime openssh-server recommends no packages. -- debconf information: ssh/insecure_rshd: * ssh/insecure_telnetd: ssh/new_config: true * ssh/use_old_init_script: true ssh/encrypted_host_key_but_no_keygen: ssh/disable_cr_auth: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361669: openssh-server: glibc detected - double free or corruption (prebanner crash)
Please make sure that you do not have an empty file /etc/krb5.keytab, as in #349526. That was it, my bad, excuse me very much for filing a new bug report. Best regards, Toni
Bug#307186: the request is valid
Hello, I have a very similar requirement like Hadmut (until I can throw Postfix out), and request that you please fix the problem. Thank you! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#192425: schema still missing
Hello, can we please see this bug closed sometime? As it currently is, users of this package who would like to use that schema, too, are required to fetch it from somewhere else (eg. from the source package). Please... Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361024: problem affects many other programs
Hello, dia displays a fatal error on startup, too. I suspect that a lot of programs is affected, and I'm not sure if my most recent series of gq crashes (usually rock solid for me) could be attributed to this problem, too. Since unrelated software is affected, I suggest upgrading to important. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#360437: apache2-mpm-prefork: add -F from 1.3 to 2.0
Package: apache2-mpm-prefork Version: 2.0.54-5 Severity: wishlist Hello, Apache 1.3 had an option -F to run under process supervisors (eg. runit), but Apache 2.0 doesn't seem to have it anymore. It would be nice if you could add this feature to Apache 2.0. I don't understand why it was stripped in the first place... Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#360109: lftp: backgrounding a foreground job doesn't work
Package: lftp Version: 3.4.2-1 Severity: normal Hello, trying to put a foreground job into the background does not work: lftp [EMAIL PROTECTED]:/ get archive.tgz [0] get archive.tgz `archive.tgz' at 60816 (0%) 42.2K/s eta:45h [Receiving data] lftp [EMAIL PROTECTED]:/ bg Unknown command `bg'. lftp [EMAIL PROTECTED]:/ fg fg 0 Interrupt lftp [EMAIL PROTECTED]:/ The man page is a bit inconsistent about this: While it doesn't list a 'bg' command, it talks about using the 'bg' or 'fg' command later on. In any case, I'd like to see this functionality added if not already in (and broken). Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages lftp depends on: ii libc6 2.3.6-4GNU C Library: Shared libraries an ii libexpat1 1.95.8-3 XML parsing C library - runtime li ii libgcc1 1:4.0.3-1 GCC support library ii libgcrypt11 1.2.2-1LGPL Crypto library - runtime libr ii libgnutls12 1.2.9-2the GNU TLS library - runtime libr ii libgpg-error0 1.1-4 library for common error values an ii libncurses5 5.5-1 Shared libraries for terminal hand ii libreadline5 5.1-4 GNU readline and history libraries ii libtasn1-20.2.17-1 Manage ASN.1 structures (runtime) ii netbase 4.25 Basic TCP/IP networking system ii zlib1g1:1.2.3-11 compression library - runtime lftp recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359921: apt-proxy stalls on cache-misses (twisted 2.2 problem?)
Package: apt-proxy
Version: 1.9.33
Severity: important
Hello,
w/o using force, I have arrived at apt-proxy plus twisted 2.2 which is
incompatible with apt-proxy. I think it shows. This happens when
apt-proxy receives a request for a non-existant file:
2006/03/29 16:45 CEST [Channel,21,192.168.1.22] [FetcherCachedFile] Serving
from cache: /mnt/deb/debian/pool/ma
in/t/tcpdump/tcpdump_3.8.3-5sarge1_i386.deb size:238642
2006/03/29 16:45 CEST [Channel,21,192.168.1.22] Traceback (most recent call
last):
File /usr/lib/python2.3/site-packages/twisted/python/log.py, line
53, in callWithLogger
return callWithContext({system: lp}, func, *args, **kw)
File /usr/lib/python2.3/site-packages/twisted/python/log.py, line
38, in callWithContext
return context.call({ILogContext: newCtx}, func, *args, **kw)
File /usr/lib/python2.3/site-packages/twisted/python/context.py,
line 59, in callWithContext
return self.currentContext().callWithContext(ctx, func, *args, **kw)
File /usr/lib/python2.3/site-packages/twisted/python/context.py,
line 37, in callWithContext
return func(*args,**kw)
--- exception caught here ---
File
/usr/lib/python2.3/site-packages/twisted/internet/selectreactor.py, line 139,
in _doReadOrWrite
why = getattr(selectable, method)()
File /usr/lib/python2.3/site-packages/twisted/internet/tcp.py, line
349, in doRead
return self.protocol.dataReceived(data)
File /usr/lib/python2.3/site-packages/twisted/protocols/basic.py,
line 232, in dataReceived
why = self.lineReceived(line)
File /usr/lib/python2.3/site-packages/twisted/web/http.py, line
961, in lineReceived
self.allContentReceived()
File /usr/share/python-support/apt-proxy/apt_proxy/apt_proxy.py,
line 1661, in allContentReceived
http.HTTPChannel.allContentReceived(self)
File /usr/lib/python2.3/site-packages/twisted/web/http.py, line
1002, in allContentReceived
req.requestReceived(command, path, version)
File /usr/lib/python2.3/site-packages/twisted/web/http.py, line
557, in requestReceived
self.process()
File /usr/share/python-support/apt-proxy/apt_proxy/apt_proxy.py,
line 1400, in process
self.fetch()
File /usr/share/python-support/apt-proxy/apt_proxy/apt_proxy.py,
line 1471, in fetch
running[self.uri].insert_request(self)
File /usr/share/python-support/apt-proxy/apt_proxy/apt_proxy.py,
line 1163, in insert_request
self.start_transfer(request)
File /usr/share/python-support/apt-proxy/apt_proxy/apt_proxy.py,
line 1184, in start_transfer
file = open(self.local_file,'rb')
-- Systeptions.IOError: [Errno 2] No such file or directory:
'/mnt/deb/debian/pool/main/t/tcpdump/tcpdump_3.8.3-5sarge1_i386.deb'
2006/03/29 16:45 CEST [Channel,21,192.168.1.22] [Fetcher] Last request removed
2006/03/29 16:45 CEST [Channel,21,192.168.1.22] [debug] Client connection closed
Noteworthy is that it takes considerable time, apparently almost a
minute, between where apt-proxy spits out the first parts of that
backtrace and the last parts of it, after which it looks like it resumes
operation, but doesn't really answer. Subsequent requests look like this
from the client side:
After unpacking 44.1MB of additional disk space will be used.
Do you want to continue? [Y/n]
Err http://192.168.1.5 stable/main less 382-1
Connection failed
Failed to fetch
http://192.168.1.5:/debian/pool/main/l/less/less_382-1_i386.deb
Connection failed
E: Unable to fetch some archives, maybe run apt-get update or try with
--fix-missing?
Which, in effect, means that I have to restart the daemon.
Best,
--Toni++
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27-2-686-smp
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages apt-proxy depends on:
ii adduser 3.85 Add and remove users and groups
ii bzip2 1.0.3-2high-quality block-sorting file co
ii debconf [debconf-2.0] 1.4.72 Debian configuration management sy
ii logrotate 3.7.1-2Log rotation utility
ii python2.3.5-5An interactive high-level object-o
ii python-bsddb3 3.3.0-6Python interface to libdb3
ii python-support0.1.1 automated rebuilding support for p
ii python-twisted2.2.0-1Event-based framework for internet
ii python-twisted-web0.5.0-4An HTTP protocol implementation to
ii python2.3 2.3.5-9.1 An interactive high-level object-o
apt-proxy recommends no packages.
-- debconf information:
* apt-proxy/upgrading-v2:
* apt-proxy
Bug#358747: python-mysqldb: dependency problem results in attempt to remove this package
Package: python-mysqldb Version: 1.2.1c3-5 Severity: normal Hello, just trying to upgrade python-mysqldb, but it doesn't work (anymore): The following packages have unmet dependencies: python-mysqldb: Depends: python2.3-mysqldb (= 1.2.1c3-6) but 1.2.1c3-6+b1 is to be installed Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages python-mysqldb depends on: ii python2.3.5-3An interactive high-level object-o ii python2.3-mysqldb 1.2.1c3-5 A Python interface to MySQL python-mysqldb recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358747: python-mysqldb: dependency problem results in attempt to remove this package
Hello Jonas, On Fri, 24.03.2006 at 13:05:57 +0100, Jonas Meurer [EMAIL PROTECTED] wrote: you can remove python-mysqldb (it is a transitional and documentation only package), and then upgrade python2.3-mysqldb. I did this already (even before reporting), but the side-effect of this is that I no longer enjoy eg. automatic release changes like going from python2.3-mysqldb to python2.4-mysqldb, should Python2.4 become the default Python version in Debian in the (hopefully) near future... this bug will be automaticly fixed with the next source upload of python-mysqldb, I thought as much, but nevertheless didn't want to let it slip. Just in case. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358579: webmin-dhcpd: doesn't work with dhcp3-server in Sarge
Package: webmin-dhcpd Version: 1.180-3 Severity: normal Hello, this is a follow-up on #204306 which the BTS wouldn't reopen. The package wants /usr/sbin/dhcpd and other file names which are no longer valid with the dhcp3-server package. This requires a number of edits in the configuration file - a patch is attached. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) --- /tmp/etc/webmin/dhcpd/config2005-01-24 23:15:57.0 +0100 +++ etc/webmin/dhcpd/config 2006-03-23 11:35:29.0 +0100 @@ -1,14 +1,17 @@ -dhcpd_conf=/etc/dhcpd.conf +dhcpd_conf=/etc/dhcp3/dhcpd.conf pid_file=/var/run/dhcpd.pid -dhcpd_path=/usr/sbin/dhcpd -lease_file=/var/lib/dhcp/dhcpd.leases +dhcpd_path=/usr/sbin/dhcpd3 +lease_file=/var/lib/dhcp3/dhcpd.leases lease_sort=0 dhcpd_nocols=5 lease_tz=0 -start_cmd=/etc/init.d/dhcp start -restart_cmd=/etc/init.d/dhcp restart +start_cmd=/etc/init.d/dhcp3-server start +restart_cmd=/etc/init.d/dhcp3-server restart show_ip=0 show_mac=0 group_name=0 display_max=100 desc_name=0 +dhcpd_version=3.0.1 +dhcpd_size=604248 +dhcpd_mtime=1109837457
Bug#354941: [Pkg-zope-developers] Bug#354941: zope3-sandbox: package is uninstallable
Hello Fabio, On Fri, 03.03.2006 at 09:27:04 +0100, Fabio Tranchitella [EMAIL PROTECTED] wrote: Il giorno gio, 02/03/2006 alle 10.15 +0100, Toni Mueller ha scritto: From debconf information (at the end of your report): zope3-sandbox/remove-instance-without-data: abort It seems that you replyed to the remove-instance-without-data question with abort, so this behaviour is normal. You have an old zope3 instance without data, and zope3-sandbox asked if it's ok to remove it or no. yes, that's it (now that you say it). Thank you! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354986: installation report: powerpc64 can't find external firewire CD, can't load sbp2 module
On Fri, 3 Mar 2006, Sven Luther wrote: On Fri, Mar 03, 2006 at 02:49:48AM +0100, Frans Pop wrote: On Thursday 02 March 2006 15:43, Toni L. Harbaugh-Blackford [Contr] wrote: Comments/Problems: ~ # modprobe sbp2 Using /lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/ieee1394.ko Using /lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/sbp2.ko insmod: cannot insert `/lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/sbp2.ko': Unknown symbol in module (-1): No such file or directory modprobe: failed to load module sbp2 The daily built images have been broken since last week due to preparation for the new Beta2 release. The links for the daily netinst and businesscard images [1] are now OK again and use 2.6.15. Full CD images may still be broken. Please try again using the current images. Indeed, altough there was an issue with ppc64 2.6.14 and the firewire modules, not sure if it has been fixed in 2.6.15 or not. Friendly, Sven Luther Maybe I tried too soon, but the netinst image dated 3/3/06 01:29 is still broken. The installer kernel is 2.6.12 ~ # uname -a Linux (none) 2.6.12-1-powerpc64 #1 SMP Tue Sep 27 15:20:16 UTC 2005 ppc64 unknown This time I remembered to check dmesg to see what symbol sbp2 lacked: ~ # dmesg | tail usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Linux Kernel Card Services options: [pci] [cardbus] ieee1394: Initialized config rom entry `ip1394' sbp2: Unknown symbol bus_to_virt so apparently 'bus_to_virt' is the trouble maker. --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354941: zope3-sandbox: package is uninstallable
Package: zope3-sandbox Version: 3.2.0-4 Severity: normal Hello, trying to install this package gives: Setting up zope3-sandbox (3.2.0-4) ... dpkg: error processing zope3-sandbox (--configure): subprocess post-installation script returned error exit status 10 and that's it. I didn't yet dissect the postinst to find out what the problem really is, sorry. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages zope3-sandbox depends on: ii debconf [debconf-2.0] 1.4.66 Debian configuration management sy ii zope-common 0.5.20 common settings and scripts for zo ii zope3 3.1.0-3Open Source Web Application Server Versions of packages zope3-sandbox recommends: ii zope3-doc 3.1.0-3Documentation for Zope3 -- debconf information: zope3-sandbox/remove-instance-without-data: abort zope3-sandbox/internal: * zope3-sandbox/admin-user: admin * zope3-sandbox/instance-http-port: 8031 * zope3-sandbox/keep-data-on-purge: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354986: installation report: powerpc64 can't find external firewire CD, can't load sbp2 module
Package: installation-reports Boot method: boot from external Firewire CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (3/1/06 2:24) Date: 3/2/06 8:30 Machine: Xserve G5 Cluster node (headless, no internal CD) Processor: dual PPC970 Memory: 2GB Partitions: N/A Output of lspci and lspci -n: N/A Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: Looks like installation will succeed IF the sbp2 module can be make to work. Unfortunately, the spb2 module cannot be loaded due to an error. The start of installation went fine. I set the input-device and output-device to scca, devalias'd 'cd' to the external firewire drive and did 0 boot cd:,\install\yaboot At the boot prompt, I specified the install64 option: boot: install64 video=ofonly console=ttyS0,57600 Installation started, got all the way up to the point of finding the cd, but then could not find the cd. I went into a shell and tried to load the sbp2 module by hand but got the following error: ~ # modprobe sbp2 Using /lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/ieee1394.ko Using /lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/sbp2.ko insmod: cannot insert `/lib/modules/2.6.12-1-powerpc64/kernel/drivers/ieee1394/sbp2.ko': Unknown symbol in module (-1): No such file or directory modprobe: failed to load module sbp2 --- Toni Harbaugh-Blackford [EMAIL PROTECTED] System Administrator Advanced Biomedical Computing Center (ABCC) National Cancer Institute Contractor - SAIC/Frederick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354850: mysql-server: upgrade 4.1-5.0 may break installation
Package: mysql-server Version: 5.0.18-8 Severity: normal Hello, when upgrading from 4.1 to 5.0, I get a message cannot upgrade if ISAM tables are present. Ok... why not convert them? But hey, the old server which could have done it is already removed at the time I get this message, and the installation process just bails out... bummer! I suggest that the upgrade script _first_ determines if there are any ISAM tables left over, then offers to automatically convert them to MyISAM (or just do it, don't know), and then removes the old server and installs the new one, not the other way round. Currently, I have: $ dpkg -l mysql-server Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name VersionDescription +++-==-==- iU mysql-server 5.0.18-8 mysql database server (current version) Thank you! Best, --Toni++ PS: No need to fix it just for me... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages mysql-server depends on: pn mysql-server-5.0 none (no description available) mysql-server recommends no packages. -- debconf information: * mysql-server/skip_networking: false mysql-server/really_downgrade_from_41: false mysql-server/want_chroot: false * mysql-server/start_on_boot: true mysql-server/postrm_remove_databases: false * mysql-server/mysql_install_db_notes: mysql-server/nis_warning: mysql-server/mysql_update_hints1: * mysql-server/postrm_remove_database: false mysql-server/fix_privileges_warning: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354238: Package: installation-reports
Package: installation-reports Boot method: CD Image version: http://people.debian.org/~fjp/d-i/gtk-miniiso/daily/i386/mini.iso 20-Feb-2006 Date: 24-Feb-2006 15:00 Machine: VMWare 5.5.1 build-19175 Processor: AMD Athlon Thunderbird 1200 MHz Memory: 192 MB Partitions: # df -Tl Dateisystem Typ1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/sda2 ext3 3842408 1573776 2073444 44% / tmpfstmpfs 96072 0 96072 0% /dev/shm tmpfstmpfs 9607268 96004 1% /dev /dev/hdc iso9660 31904 31904 0 100% /media/cdrom0 # fdisk -l /dev/sda Disk /dev/sda: 4509 MB, 4509715456 bytes 255 heads, 63 sectors/track, 548 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 62 497983+ 82 Linux swap / Solaris /dev/sda2 * 63 548 3903795 83 Linux Output of lspci and lspci -n: # lspci :00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01) :00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01) :00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08) :00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) :00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB :00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08) :00:0f.0 VGA compatible controller: VMware Inc [VMware SVGA II] PCI Display Adapter :00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 01) :00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) :00:12.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02) # lspci -n :00:00.0 0600: 8086:7190 (rev 01) :00:01.0 0604: 8086:7191 (rev 01) :00:07.0 0601: 8086:7110 (rev 08) :00:07.1 0101: 8086:7111 (rev 01) :00:07.2 0c03: 8086:7112 :00:07.3 0680: 8086:7113 (rev 08) :00:0f.0 0300: 15ad:0405 :00:10.0 0100: 1000:0030 (rev 01) :00:11.0 0200: 1022:2000 (rev 10) :00:12.0 0401: 1274:1371 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [O] Comments/Problems: Installer worked fine without any problems. Maybe you should consider changing the UI of the partitioning module. It's still the same interface like in sarge text mode. E.g. setting the boot flag to enabled on any partition by clicking on the button Next is a bit strange (in contrast to installers of other distributions). -- Telefonieren Sie schon oder sparen Sie noch? NEU: GMX Phone_Flat http://www.gmx.net/de/go/telefonie -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#333953: problem still exists in bash 3.1
Hello, today I stumbled upon this behaviour, too. I have: $ dpkg -l bash ... ii bash 3.1-1 The GNU Bourne Again SHell and $ shopt|grep case nocaseglob off nocasematch off but still get this stupid behaviour unless I set LC_COLLATE=C (as you suggest). I'd be less discontent with this LUSER feature if there'd be at least the semi-usual mixed-case matching (ie, ignore case if all pattern elements are lower case, but obey it otherwise), but setting these two options shown above should really be sufficient to prevent automatic case folding. As a side note, automatic case folding does _NOT_ improve usability because everything else in Unix and assorted flavours is case-sensitive, thus this change only blurs the distinction to Unix novices which will confuse them down the road when they end up with files like abc.txt and Abc.txt and no way to recognize the difference, much less differentiate them. Thank you! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#251885: ITP: cgal -- C++ library for computational geometry
On Tue, Feb 07, 2006 at 08:04:40PM +0100, Joachim Reichel wrote:
How does upstream release version 3.1 of CGAL, actually fixes these
issues?
The license of some files was changed such that all files in the Kernel
and Support Library are licensed under LGPL, the files in the Basic
Library are licensed under QPL. In particlar, all *.C files that end up
in libCGAL.so are licensed under LGPL.
ok. I got a different impression at first about the libCGAL.so.
After doing QPL-cleanup:
$ rm `grep -lr LICENSE.QPL .`
Build do fails. There seems to be some debug headers that the core
uses.
Fortunately it is rather easy to fix (either fixing the license of the
debug headers or the use of the debug header with an attached patch).
--
Toni Timonen toni dot timonen at iki dot fi
NP Solutions Ltd
Helsinki University of Technology
Department of Engineering Physics and Mathematicsdiff -rub CGAL-3.1-orig/include/CGAL/Nef_2/Polynomial.h
CGAL-3.1/include/CGAL/Nef_2/Polynomial.h
--- CGAL-3.1-orig/include/CGAL/Nef_2/Polynomial.h 2006-02-07
00:21:27.0 +0200
+++ CGAL-3.1/include/CGAL/Nef_2/Polynomial.h2006-02-07 23:29:44.0
+0200
@@ -35,7 +35,6 @@
#include cstddef
#undef _DEBUG
#define _DEBUG 3
-#include CGAL/Nef_2/debug.h
#include vector
diff -rub CGAL-3.1-orig/src/Polynomial.C CGAL-3.1/src/Polynomial.C
--- CGAL-3.1-orig/src/Polynomial.C 2006-02-07 00:21:26.0 +0200
+++ CGAL-3.1/src/Polynomial.C 2006-02-07 07:27:24.0 +0200
@@ -24,6 +24,9 @@
#include CGAL/Nef_2/Polynomial.h
+#define CGAL_NEF_TRACEN(foo)
+#define CGAL_NEF_TRACEV(foo)
+
namespace CGAL{
signature.asc
Description: Digital signature
Bug#251885: ITP: cgal -- C++ library for computational geometry
Hi, How does upstream release version 3.1 of CGAL, actually fixes these issues? I don't see any changes in the license since lgpl/qpl dual licensing. -- Toni Timonen NP-Ratkaisut Oy Teknillinen Korkeakoulu/Teknillinen Fysiikka 040-5111863,GPG 0x7984A4FD, [EMAIL PROTECTED] ICQ #45732842 irc://irc.npr.fi/#perunamaa signature.asc Description: Digital signature
Bug#347294: jpilot: buttons are partially hidden in some screens
Package: jpilot Version: 0.99.8-0.99.9-pre1-1 Severity: normal Hello, the attached image shows that there are two buttons in the lower right corner of the screen which are overlapped by the data entry pane on the right side of the window. This overlap happens in phonebook, todo list, and memo pad at least, but not in datebook. While I didn't find specific needs to have these buttons, seeing them there is sort of annoying. Thank you! Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages jpilot depends on: ii debconf [debconf-2.0]1.4.66 Debian configuration management sy ii libatk1.0-0 1.10.3-1The ATK accessibility toolkit ii libc62.3.5-9 GNU C Library: Shared libraries an ii libcairo21.0.2-3 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-1.1 generic font configuration library ii libglib2.0-0 2.8.4-2 The GLib library of C routines ii libgtk2.0-0 2.8.9-2 The GTK+ graphical user interface ii libpango1.0-01.10.1-2Layout and rendering of internatio ii libpisock8 0.11.8-17 Library for communicating with a P ii libx11-6 6.8.2.dfsg.1-11 X Window System protocol client li ii libxcursor1 1.1.3-1 X cursor management library ii libxext6 6.8.2.dfsg.1-11 X Window System miscellaneous exte ii libxi6 6.8.2.dfsg.1-11 X Window System Input extension li ii libxinerama1 6.8.2.dfsg.1-11 X Window System multi-head display ii libxrandr2 6.8.2.dfsg.1-11 X Window System Resize, Rotate and ii libxrender1 1:0.9.0-2 X Rendering Extension client libra Versions of packages jpilot recommends: pn jpilot-pluginsnone (no description available) -- debconf information excluded jpilot-geometry-example.png Description: PNG image
Bug#346195: sql-ledger: new upstream version available
Package: sql-ledger Severity: wishlist Hello, several new upstream versions are available, the latest now being 2.6.4 as of this writing, which have a significant number of improvements over 2.4.7. It would be nice to get back in sync, somewhat... Thank you! Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345923: xcdroast: burning CD sometimes reported as ok, but verifying always fails
Package: xcdroast Version: 0.98+0alpha15-3 Severity: normal *** Please type your report below this line *** Hello, recently I'm running into a problem writing a (ready-made) ISO to CD. The logs show that there's odd behaviour of the drive together with a note to report this. My setup includes hda (IDE drive, ATA-100) and hdc (the writer, also ATA-100), each on a different bus, as well as two real SCSI drives (10k). When I try to write an image from the IDE drive, I get buffer underruns which should not happen on this drive (see attached log cd1.log), and when I write an image from a SCSI drive, xcdroast says that writing was ok (see attached log cd2.log), but trying to verify the CD after writing always fails at some 97%. I'm a bit at a loss as to why that happens and realize that these might be problems with the cdrecord package instead of xcdroast itself. But since I'm no CD expert, I'll start here. Thank you! Best, --Toni++ Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= 1,0,0 gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo speed=16 -dao -eject -pad -data /mnt/home/toni/mnt/cdimgs/KNOPPIX_V4.0.2CD-2005-09-23-DE.iso ... scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). SCSI buffer size: 64512 cdrecord: Asked for SCSI I/O buffer size 64512 bytes, could only get 20480. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support. Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to [EMAIL PROTECTED]. The original author should not be bothered with problems of this version. TOC Type: 1 = CD-ROM Using libscg version 'ubuntu-0.8ubuntu1'. Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'PLEXTOR ' Identifikation : 'DVDR PX-712A ' Revision : '1.03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC GIGAREC FORCESPEED SPEEDREAD SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 4802784 = 4690 KB Drive DMA Speed: 1872 kB/s 10x CD 1x DVD FIFO size : 4194304 = 4096 KB pregap1: -1 cdrecord: DMA speed too slow (OK for 8x). Cannot write at speed 16x. Track 01: data 694 MB padsize: 30 KB Total size: 797 MB (79:01.02) = 355577 sectors Lout start: 797 MB (79:03/02) = 355577 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type:Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Single session is OFF. Hide CDR is OFF. Speed-Read is OFF. GigaRec is off. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 4272 Forcespeed is OFF. Power-Rec is ON. Power-Rec write speed: 48x (recommended) Starting to write CD/DVD at speed 16 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 05 53 E8 00 00 0A 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 05 54 7E 0A 00 00 00 00 0C 09 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 349310 (valid) cmd finished after 86.272s timeout 200s cdrecord: The current problem looks like a buffer underrun. cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. cdrecord: Please report. cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. cdrecord: Input/output error. flush cache: scsi sendcmd: no error write track data: error after 715079680 bytes CDB: 35 00 00 00 00 00 00 00 00 00 Writing time: 527.909s status: 0x2 (CHECK CONDITION) Average write speed 9.2x. Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 Min drive buffer fill was 0% Sense Key: 0x5 Illegal Request, Segment 0 Total of 41 possible drive
Bug#344211: sqcwa: init script prevents removal
Package: sqcwa Version: 0.3-2 Severity: normal Hello, the init.d-script exits with code 1 if sqcwa wasn't running at the time and the pidfile doesn't exist. I suggest adding --oknodo to the invocation of start-stop-daemon under the 'stop' command. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages sqcwa depends on: ii libc6 2.3.5-8.1 GNU C Library: Shared libraries an pi squid 2.5.10-2 Internet Object Cache (WWW proxy c pi squidclient 2.5.10-2 Command line URL extractor that ta sqcwa recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#324557: ITA
retitle 324557 ITA - will make a stab at it owner 324557 [EMAIL PROTECTED] thanks pgpZFhdCSTLzk.pgp Description: PGP signature
Bug#336696: not solved for 2.4.27-2
Hello, I experience a very similar problem when trying to use tsearch2 (part of the postgres-contrib-7.4 package) under unstable with roundup. Trying to initialise a tracker yields: *** glibc detected *** free(): invalid next size (fast): 0x08182ad0 *** Aborted I run sid on kernel 2.4.27-2-686-smp and now have libc6 version 2.3.5-8.1. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#340229: tetex-bin: does not configure
Hello Frank, On Tue, 22.11.2005 at 09:30:49 +0100, Frank Küster [EMAIL PROTECTED] wrote: This should be /usr/share/texmf/tex/lambda/base/lambda.tex it turned out that some local path settings in texmf.cnf broke the upgrade. Eventually I resorted to de-install tetex-bin using --force, removing the config file by hand, and re-installing tetex-bin. I didn't have time to thoroughly test it, but cursory checks didn't reveal any errors. Thanks! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#340719: tgif: pstoepsi broken
Package: tgif Version: 1:4.1.44-4 Severity: normal Tags: patch Hello, the program pstoepsi is broken in several ways: - When using the option -2x, checking for the source file is done in an incorrect way. The attached patch fixes this. - The program assumes that it can use a program pbmtoepsi has an option -scale, which the version included with Debian has not. Thus, scaling breaks. - In the branch at line 98, there is a redundant setting of STYLE, which the patch also fixes, but it doesn't fix the case that later on, the overwritten value of STYLE is tested against. If this is simply a piece of dead code, or if this hides another problem, I didn't investigate. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages tgif depends on: ii debconf [debconf-2.0] 1.4.58 Debian configuration management sy ii gettext 0.14.5-2 GNU Internationalization utilities ii libc6 2.3.5-6GNU C Library: Shared libraries an ii libice6 6.8.2.dfsg.1-4 Inter-Client Exchange library ii libsm66.8.2.dfsg.1-4 X Window System Session Management ii libx11-6 6.8.2.dfsg.1-4 X Window System protocol client li ii libxext6 6.8.2.dfsg.1-4 X Window System miscellaneous exte ii libxmu6 6.8.2.dfsg.1-4 X Window System miscellaneous util ii libxt66.8.2.dfsg.1-4 X Toolkit Intrinsics ii xlibs 6.8.2.dfsg.1-4 X Window System client libraries m tgif recommends no packages. -- debconf information excluded --- /usr/bin/pstoepsi 2005-10-10 19:58:01.0 +0200 +++ /tmp/pstoepsi 2005-11-25 12:31:27.0 +0100 @@ -77,7 +77,7 @@ esac done -BASE=`basename $1 .ps` +BASE=`basename $1`.ps if [ $# -ne 2 -o ! -f $1 -o $1 = $BASE ] ; then echo $USAGE 12 @@ -96,7 +96,6 @@ fi if [ gs = $INTERP ] ; then -STYLE=none STYLE=ppm if [ != $ALADDIN ] ; then if [ 3 = $GSVERSION -o 4 = $GSVERSION ] ; then
Bug#306095: me too
Hello, I'd also like to see a bandwidth limit in apt-proxy, for very similar reasons. Having an extra Squid with bandwidth limit isn't an option right now, and also looks a bit oversized. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#340229: tetex-bin: does not configure
Package: tetex-bin
Version: 3.0-10.1
Severity: important
Hello,
I can't install tetex-bin. Bug titled important instead of grave because
I have locally modified config. From the log file:
fmtutil-sys: running `aleph -ini -jobname=lamed -progname=lamed
*lambda.ini' ...
This is Aleph, Version 3.141592-1.15-2.1-0.0-rc4 (Web2C 7.5.4)
(INIALEPH)
Copyright (c) 2002--2004 the Aleph task force
entering extended mode
(/usr/share/texmf/tex/latex/config/lambda.ini
(/usr/share/texmf/tex/generic/skak/lambda.tex
! Undefined control sequence.
l.19 \documentstyle
[ltugboat,Lambda]{article}
! Undefined control sequence.
l.27 \title
{Lists in \TeX's Mouth}
! Undefined control sequence.
l.27 \title{Lists in \TeX
's Mouth}
! Undefined control sequence.
l.29 \author
{Alan Jeffrey}
! Undefined control sequence.
l.31 \address
{Programming Research Group\\
! Undefined control sequence.
l.31 \address{Programming Research Group\\
! Undefined control sequence.
l.32 Oxford University\\
! Undefined control sequence.
l.33 11 Keble Road\\
! Undefined control sequence.
l.36 \netaddress
[EMAIL PROTECTED]
! Undefined control sequence.
l.38 \makeatletter
)
Runaway definition?
setmcodes#1#2#3{{\count 0=#1 \count 1=#3 \loop \global \mathcode \count
\ETC.
! File ended while scanning definition of [EMAIL PROTECTED]
inserted text
}
l.3 \input lambda.tex
! Missing { inserted.
inserted text }
l.3 \input lambda.tex
)
*
! Emergency stop.
* *lambda.ini
Kind Regards,
--Toni++
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27-2-686-smp
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages tetex-bin depends on:
ii debconf [debconf-2.0]1.4.59 Debian configuration management sy
ii debianutils 2.15.1 Miscellaneous utilities specific t
ii dpkg 1.13.11.0.1 package maintenance system for Deb
ii ed 0.2-20 The classic unix line editor
ii libc62.3.5-8 GNU C Library: Shared libraries an
ii libgcc1 1:4.0.2-4 GCC support library
ii libice6 6.8.2.dfsg.1-10 Inter-Client Exchange library
ii libkpathsea4 3.0-10.1path search library for teTeX (run
ii libpaper11.1.14-3Library for handling paper charact
ii libpng12-0 1.2.8rel-5 PNG library - runtime
ii libsm6 6.8.2.dfsg.1-10 X Window System Session Management
ii libstdc++6 4.0.2-4 The GNU Standard C++ Library v3
ii libt1-5 5.1.0-2 Type 1 font rasterizer library - r
ii libx11-6 6.8.2.dfsg.1-10 X Window System protocol client li
ii libxaw8 6.8.2.dfsg.1-10 X Athena widget set library
ii libxext6 6.8.2.dfsg.1-10 X Window System miscellaneous exte
ii libxmu6 6.8.2.dfsg.1-10 X Window System miscellaneous util
ii libxp6 6.8.2.dfsg.1-10 X Window System printing extension
ii libxpm4 6.8.2.dfsg.1-10 X pixmap library
ii libxt6 6.8.2.dfsg.1-10 X Toolkit Intrinsics
ii mime-support 3.35-1 MIME files 'mime.types' 'mailcap
ii perl 5.8.7-8 Larry Wall's Practical Extraction
ii sed 4.1.4-4 The GNU sed stream editor
ii tetex-base 3.0-10 Basic library files of teTeX
ii ucf 2.003 Update Configuration File: preserv
ii xlibs6.8.2.dfsg.1-10 X Window System client libraries m
ii zlib1g 1:1.2.3-8 compression library - runtime
Versions of packages tetex-bin recommends:
ii dialog1.0-20051107-1 Displays user-friendly dialog boxe
ii libxml-parser-perl2.34-4 Perl module for parsing XML files
ii perl-tk 1:800.025-2Perl module providing the Tk graph
ii psutils 1.17-21A collection of PostScript documen
ii whiptail 0.51.6-31 Displays user-friendly dialog boxe
-- debconf information:
tetex-bin/cnf_name:
tetex-bin/updmap-failed:
* tetex-bin/upd_map: true
* tetex-bin/fmtutil: true
tetex-bin/fmtutil-failed:
* tetex-bin/hyphen: bahasa, basque, catalan, croatian, czech,
german[=austrian-alte_Rechtschreibung], danish, dutch, finnish,
french[=patois], greek, icelandic, italian, latin, magyar, norsk[old],
norsk[nohyphb.tex
Bug#338883: thttpd: new version out
Package: thttpd Version: 2.23beta1-1 Severity: wishlist Hello, ACME Laboratories has a new version of thttpd out which improves many things over the 2.23 version in Debian. It would be nice to see an upgrade. Thank you! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#335676: postgresql: locale problems (guc.c)
Package: postgresql Version: 7.4.7-6sarge1 Severity: grave Justification: renders package unusable I've tried switching locales, ISO-8859-1/-15/UTF-8 in both en_US and fi_FI. Suddenly, postgresql won't start anymore. Logs say: FATAL: XX000: failed to initialize lc_messages to LOCATION: InitializeGUCOptions, guc.c:1867 I've used dpkg-reconfigure locales to reinstall/regenerate locales. I've also used dpkg-reconfigure postgresql to try basic C locale, fi_FI, etc. Nothing works. Can't get postgresql to start. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.8-2-386 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages postgresql depends on: ii adduser 3.63Add and remove users and groups ii debconf [debconf 1.4.30.13 Debian configuration management sy ii debianutils 2.8.4 Miscellaneous utilities specific t ii dpkg 1.10.28 Package maintenance system for Deb ii libc62.3.2.ds1-22GNU C Library: Shared libraries an ii libcomerr2 1.37-2sarge1common error description library ii libkrb53 1.3.6-2sarge2 MIT Kerberos runtime libraries ii libpam0g 0.76-22 Pluggable Authentication Modules l ii libperl5.8 5.8.4-8 Shared Perl library ii libpq3 7.4.7-6sarge1 PostgreSQL C client library ii libreadline4 4.3-11 GNU readline and history libraries ii libssl0.9.7 0.9.7e-3SSL shared libraries ii mailx1:8.1.2-0.20040524cvs-4 A simple mail user agent ii postgresql-clien 7.4.7-6sarge1 front-end programs for PostgreSQL ii procps 1:3.2.1-2 The /proc file system utilities ii python2.32.3.5-3sarge1 An interactive high-level object-o ii ucf 1.17Update Configuration File: preserv ii zlib1g 1:1.2.2-4.sarge.2 compression library - runtime -- debconf information: * postgresql/initdb/location: /var/lib/postgres/data * postgresql/purge_data_too: true postgresql/upgrade/preserve_location: $PGDATA/.. * postgresql/settings/day_month_order: European postgresql/very_old_version_warning: true postgresql/upgrade/policy: true postgresql/upgrade/dump_location: $PGDATA/.. * postgresql/settings/locale: C postgresql/convert-pg_hba.conf: true postgresql/enable_lang: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#335676: postgresql: locale problems (guc.c)
On 10/25/05, Martin Pitt [EMAIL PROTECTED] wrote: This usually means that the PostgreSQL database cluster was configured to use a locale which does not exist any more. Please give me the output of the following commands: Hey Martin, and thanks for the speedy reply! Sorry, but I already removed (with purge and rm -rf /var/lib/postgres) the packages postgresql and postgresql-contrib, added a bunch of locales, regenerated them, reinstalled and chose a UTF-8 locale this time. It started working. However, I do believe dpkg-reconfigure postgresql gave me the option to choose a locale (and it showed the correct choices), yet didn't change the option in postgresql itself. best regards, -- Toni Heinonen ~ [EMAIL PROTECTED] ~ http://tonih.iki.fi/ ~ 040-836 1815 Have patience awhile; slanders are not long-lived. Truth is the child of time; erelong she shall appear to vindicate thee. - Immanuel Kant
Bug#331409: bash: job control often doesn't work
Package: bash Version: 3.0-16 Severity: important Hello, bash's job control doesn't work rather often, at least not under X11. Example: $ vi .bashrc ^Z Now the process hangs. In 'ps ax|grep vi' I can see this: 8078 pts/14 T+ 0:00 vi .bashrc If I now say 'kill -CONT 8078', I'm back in vi and can continue to edit the file normally, but this way I'm restricted from doing most anything which includes job control. The problem also happens with 'less', therefore I concluded that bash was the common factor, and thus the target of the bug. Thank you! Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages bash depends on: ii base-files3.1.9 Debian base system miscellaneous f ii libc6 2.3.5-6GNU C Library: Shared libraries an ii libncurses5 5.4-9 Shared libraries for terminal hand ii passwd1:4.0.12-6 change and administer password and bash recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#324389: roundup: registering does not work (too many redirects)
Package: roundup Version: 0.8.4-1 Severity: normal Hello, I have a fresh install of roundup together with PostgreSQL as the backend and runit as the mechanism to run (as distributed in the package), but under a dedicated user roundup. Also, I have immediate_registration = no which forces email verification. When I try to register, I get this: Redirection limit for this page exceeded. Unable to load the requested page. This may be caused by cookies that are blocked. The result is that the table 'otks' fills up, the mail gets sent, but when I click the resulting confirmation link, I get redirected to the home page of the tracker, and that's it. If I then try to log in as the user I should be logged in as anyway, I get Unknown user (clicking the confirmation link should log me in automatically). The table _user doesn't get filled. Observed with Firefox 1.0.6 and Opera 8.0.2. Trying this with Elinks reveals this header: HTTP/1.0 301 Moved Permanently Server: BaseHTTP/0.3 Python/2.3.5 Date: ... (date header) Location: http://spruce:9300/[EMAIL PROTECTED]// (10 slashes). The effect is the same, though - no user gets registered. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages roundup depends on: ii python2.3.5-3An interactive high-level object-o roundup recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#148319: real college girls Wanda
Do you want to see real amateurs who have webcams on their computers in their dorm rooms? This is not one of those sites with professional girls who get paid to do this in front of the camera, these are the average girls next door, at college, trying to make money and meet guys! Get free access to a huge database of hot college girls, unlimited cam shows with LIVE CHAT and there are no Pay-Per-Minute charges! http://burntbypens.com/co25/ far you hieronymus me inexcusable you dreg me blackbody you duration me occlude you thrush me delaney you beg me -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#322906: xpdf: rendering of file garbled
Package: xpdf-reader Version: 3.00-14 Severity: normal *** Please type your report below this line *** Hello, the file that can be retrieved at this location: http://www.homeschoolersguide.ca/pdf/winter05/articles.pdf doesn't render in a useful manner. Most characters are garbled and can't be read. I don't know enough to decide whether the file is proper PDF, however. Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages xpdf depends on: ii xpdf-common 3.00-14Portable Document Format (PDF) sui ii xpdf-reader 3.00-14Portable Document Format (PDF) sui ii xpdf-utils3.00-14Portable Document Format (PDF) sui xpdf recommends no packages. Versions of packages xpdf-reader depends on: ii gsfonts 8.14+v8.11+urw-0.2 Fonts for the Ghostscript interpre ii lesstif2 1:0.93.94-11.4 OSF/Motif 2.1 implementation relea ii libc6 2.3.5-3GNU C Library: Shared libraries an ii libfreetype6 2.1.10-1 FreeType 2 font engine, shared lib ii libgcc1 1:4.0.1-4 GCC support library ii libice6 6.8.2.dfsg.1-4 Inter-Client Exchange library ii libpaper1 1.1.14-3 Library for handling paper charact ii libsm66.8.2.dfsg.1-4 X Window System Session Management ii libstdc++64.0.1-4The GNU Standard C++ Library v3 ii libt1-5 5.1.0-2Type 1 font rasterizer library - r ii libx11-6 6.8.2.dfsg.1-4 X Window System protocol client li ii libxext6 6.8.2.dfsg.1-4 X Window System miscellaneous exte ii libxp66.8.2.dfsg.1-4 X Window System printing extension ii libxpm4 6.8.2.dfsg.1-4 X pixmap library ii libxt66.8.2.dfsg.1-4 X Toolkit Intrinsics ii xlibs 6.8.2.dfsg.1-4 X Window System client libraries m ii xpdf-common 3.00-14Portable Document Format (PDF) sui ii zlib1g1:1.2.3-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#322919: gs: rendering of file garbled
Package: gs Version: 8.15-2 Severity: normal *** Please type your report below this line *** Hello, the file that can be retrieved at this location: http://www.homeschoolersguide.ca/pdf/winter05/articles.pdf doesn't render in a useful manner. Most characters are garbled and can't be read. I don't know enough to decide whether the file is proper PDF, however. Please note that xpdf also doesn't cut it. Therefore I filed the same report for xpdf (bug #322906). Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages gs depends on: ii gs-gpl8.15-2 The GPL Ghostscript PostScript int gs recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#316956: Same problem with Apache1.3 and mod_perl
Hi, just for the record, I see the same error with Apache 1.3 and mod_perl (both latest in sid). Taking a peek in the appropriate file, which seems to be /usr/share/perl5/HTML/Mason/Resolver/File.pm I find that there is indeed no variable comp_root_array, but that this has become a local variable in one of the remaining subroutines. Looks like a major package overhaul has taken place behind the back of RT... Since I only use the web interface, RT is severely broken for me right now. :-| Will peek at 3.4 and see if that solves the problem. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#316956: Same problem with Apache1.3 and mod_perl
Hi Stephen, On Sat, 06.08.2005 at 11:41:35 +0100, Stephen Quinney [EMAIL PROTECTED] wrote: This problem is caused entirely by the latest version of the libhtml-mason-perl package that is in sid. that's what I thought so far. The only way to resolve it right now is to grab the previous version from snapshot.debian.net and downgrade. Ugh... I would recommend that you move to request-tracker3.4 anyway as we are going to remove the request-tracker3.0 package from sid and etch soon. Yes, although your remarks in the READMEs pertaining to alpha or beta quality made me a bit nervous, I just tried to migrate and lost all history in the process. I've also already seen another bug that mentions this and see if I can fix it. Thanks! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#316956: Same problem with Apache1.3 and mod_perl
know if I should worry about those not found messages, but I got my history back (probably was a usage problem, or even duelling PostgreSQL servers - I have 7.4.8 and 8.0, but stopped the latter in order to ensure that I work with the former while upgrading). Thank you! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#38857: A patch for handling readonly keyrings in gnupg
Package: gnupg
Version: 1.4.1-1.1
Followup-For: Bug #38857
tags 38857 + patch
thanks
Hi,
I wrote a patch for gnupg to handle readonly keyrings correctly.
What it does now, is that when you try to modify a key in a keyring
that is not writable it makes a copy of that keyring to a writable one
and modifies it.
Patch attached.
--
Toni Timonen toni dot timonen at iki dot fi
NP Solutions Ltd
Helsinki University of Technology
Department of Engineering Physics and Mathematics
diff -Nrub orig/gnupg-1.4.1/debian/patches/00list
new/gnupg-1.4.1/debian/patches/00list
--- orig/gnupg-1.4.1/debian/patches/00list 2005-07-18 19:17:32.0
+0300
+++ new/gnupg-1.4.1/debian/patches/00list 2005-07-18 19:53:17.0
+0300
@@ -1,2 +1,3 @@
15_free_caps
16_min_privileges
+20_readonly_keyrings
diff -Nrub orig/gnupg-1.4.1/debian/patches/20_readonly_keyrings.dpatch
new/gnupg-1.4.1/debian/patches/20_readonly_keyrings.dpatch
--- orig/gnupg-1.4.1/debian/patches/20_readonly_keyrings.dpatch 1970-01-01
02:00:00.0 +0200
+++ new/gnupg-1.4.1/debian/patches/20_readonly_keyrings.dpatch 2005-07-18
19:53:13.0 +0300
@@ -0,0 +1,38 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 20_readonly_keyrings.dpatch by [EMAIL PROTECTED]
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Patch to handle readonly keyrings (see #38857).
+
[EMAIL PROTECTED]@
+
+diff -rub orig/gnupg-1.4.1/g10/keydb.c gnupg-1.4.1/g10/keydb.c
+--- orig/gnupg-1.4.1/g10/keydb.c 2004-10-14 10:11:56.0 +0300
gnupg-1.4.1/g10/keydb.c2005-07-18 19:34:53.0 +0300
+@@ -526,7 +526,17 @@
+ rc = G10ERR_GENERAL; /* oops */
+ break;
+ case KEYDB_RESOURCE_TYPE_KEYRING:
++ if(keyring_is_writable (hd-active[hd-found].token)) {
+ rc = keyring_update_keyblock (hd-active[hd-found].u.kr, kb);
++ } else {
++rc = keydb_locate_writable(hd,NULL);
++if (rc) {
++ log_error (_(no writable keyring found: %s\n), g10_errstr (rc));
++ break;
++}
++rc = keyring_insert_keyblock (hd-active[hd-current].u.kr, kb);
++
++ }
+ break;
+ }
+
+@@ -680,6 +690,8 @@
+ case KEYDB_RESOURCE_TYPE_NONE: /* ignore */
+ break;
+ case KEYDB_RESOURCE_TYPE_KEYRING:
++if(!keyring_is_writable(all_resources[i].token))
++ break;
+ rc = keyring_rebuild_cache (all_resources[i].token,noisy);
+ if (rc)
+ log_error (_(failed to rebuild keyring cache: %s\n),
signature.asc
Description: Digital signature
Bug#308292: gv: example problem file (url inside)
Followup-For: Bug #308292 Package: gv Version: 1:3.6.1-11 *** Please type your report below this line *** Hello, this file is one example of a file which can't be viewed using gv: http://files.horvath.com/CookieApron.pdf Best, --Toni++ -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-2-686-smp Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages gv depends on: ii gs 8.01-5 Transitional package ii gs-esp [gs] 7.07.1-9The Ghostscript PostScript interpr ii gs-gpl [gs] 8.01-5 The GPL Ghostscript PostScript int ii libc62.3.2.ds1-22GNU C Library: Shared libraries an ii libice6 4.3.0.dfsg.1-14 Inter-Client Exchange library ii libsm6 4.3.0.dfsg.1-14 X Window System Session Management ii libx11-6 4.3.0.dfsg.1-14 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-14 X Window System miscellaneous exte ii libxmu6 4.3.0.dfsg.1-14 X Window System miscellaneous util ii libxpm4 4.3.0.dfsg.1-14 X pixmap library ii libxt6 4.3.0.dfsg.1-14 X Toolkit Intrinsics ii xaw3dg 1.5+E-8 Xaw3d widget set ii xlibs4.3.0.dfsg.1-13 X Keyboard Extension (XKB) configu -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#312452: mencal: Support for default configuration file
Package: mencal
Version: 2.3-4
Severity: wishlist
Tags: patch upstream
Hi,
I wrote a patch for mencal to support having ~/.mencalrc read
by default if such file exists.
Patch attached.
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (50, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.9
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages mencal depends on:
ii perl 5.8.4-8Larry Wall's Practical Extraction
-- no debconf information
--
Toni Timonen toni dot timonen at iki dot fi
NP Solutions Ltd
Helsinki University of Technology
Department of Engineering Physics and Mathematics
diff -rub orig/mencal-2.3/mencal mencal-2.3/mencal
--- orig/mencal-2.3/mencal 2003-07-17 08:53:15.0 +0300
+++ mencal-2.3/mencal 2005-06-08 11:23:39.0 +0300
@@ -229,6 +229,13 @@
);
my @confs=();
+ #There exists a config file
+ $_ = $ENV{HOME}/.mencalrc;
+ if (-f $_ -r $_) {
+push(@confs,Conf-new());
+$confs[$#confs]-parsefile($_);
+ }
+
for(my $i=0; $i=$#ARGV; $i++) {
foreach($ARGV[$i]) {
/^(-h|--help)$/ Main::usage;
signature.asc
Description: Digital signature
Bug#162258: This bug is probably to be closed
Hi, On Sun, 29.05.2005 at 02:13:54 +0200, Javier Fernández-Sanguino Peña [EMAIL PROTECTED] wrote: On Tue, May 24, 2005 at 07:58:28AM +0200, Christian Perrier wrote: by you, not me. It still has min/max to 4/8 and nullok on, in common-password, which I definitely don't consider to be safe. It's up to you to convince the maintainer of libpam-runtime. So far, Sam appeared to me as quite wise, so these choices haven't probably be made without thinking. imho there's only one reason for this, namely, to cater for legacy installations who don't use MD5 passwords. I guess (or rather hope) that this has become to be a dwindling minority case in the last few years. At least I'm not aware of any modern system that can't handle MD5 passwords, and I also think that MD5 passwords should be the default for any new installations. There's no reason why passwords should be limited to 8 characteres _specially_ if you are using MD5 (and not crypt) to store passwords which allows for a much higher password length. ACK, and on our systems, about the first thing I do is upping the limits on password sizes. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#304735: LDBM and 2.2.x
Hello, fwiw, I have 2.2.23 with ldbm backend running w/o a hitch on OpenBSD, but breaking down completely on Debian almost sarge. Esp. I can browse the directory and find whatever I want, but don't see these same records when I use search (with gq or ldapsearch, that is). Also, looking at http://www.openldap.org/software/release/changes.html suggests that a number of important bugs have been killed between 2.2.23 and now, although that might be too late for sarge. Btw, aren't there any regression test suites to run before promoting such packages, and/or can we probably move to having the debian/* stuff in a publicly accessible CVS or something (I prefer ARCH), to be able to recreate older packages at any date (analogous to the BSD ports system)? Thanks for listening! Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#304735: LDBM and 2.2.x
Hi Torsten, On Sun, 29.05.2005 at 17:06:32 +0200, Torsten Landschoff [EMAIL PROTECTED] wrote: On Sun, May 29, 2005 at 04:11:48PM +0200, Toni Mueller wrote: fwiw, I have 2.2.23 with ldbm backend running w/o a hitch on OpenBSD, but breaking down completely on Debian almost sarge. Interesting. Which OpenLDAP version are you using? that's openldap-server-2.2.23 (but I had severe problems getting it to run properly using bdb). Sucky. You name it :-/ Time to get another LDAP server software package... Hmm, good question. It shouldn't be too hard to just build the new upstream version but I wonder if our release manager would really like this. That's exactly what I thought. Also, none of the bugs listed really spring to my mind as being the solution of any of the problems mentioned in this bug. Look here: http://svn.debian.org/wsvn/pkg-openldap/openldap/debian/ Ok, thank you! (I thought of having this for *all* Debian packages because the problem arises frequently, imho). Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#308292: gv: cant display new PDF file (1.4 in general?)
Package: gv Version: 1:3.6.1-10 Severity: normal Hello, I was sent a PDF version 1.4 created by PDFCreator Version 0.8.0 that I can't read using gv. The display shows empty boxes, partially placed one over another, and character sequences like '!M' or '?M'. Only the main headlines are readable. FWIW, xpdf 3.00-13 has no problem displaying the whole file. Best, --Toni++ -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages gv depends on: ii gs 8.01-5 Transitional package ii gs-gpl [gs] 8.01-5 The GPL Ghostscript PostScript int ii libc62.3.2.ds1-21GNU C Library: Shared libraries an ii libice6 4.3.0.dfsg.1-12.0.1 Inter-Client Exchange library ii libsm6 4.3.0.dfsg.1-12.0.1 X Window System Session Management ii libx11-6 4.3.0.dfsg.1-12.0.1 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-12.0.1 X Window System miscellaneous exte ii libxmu6 4.3.0.dfsg.1-12.0.1 X Window System miscellaneous util ii libxpm4 4.3.0.dfsg.1-12.0.1 X pixmap library ii libxt6 4.3.0.dfsg.1-12.0.1 X Toolkit Intrinsics ii xaw3dg 1.5+E-8 Xaw3d widget set ii xlibs4.3.0.dfsg.1-12 X Keyboard Extension (XKB) configu -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#308293: reportbug: creates broken envelopes
Package: reportbug Version: 3.11 Severity: normal Hello, reportbug routinely creates the following broken envelope when trying to mail a bug report: - clip [EMAIL PROTECTED],: Sorry, I couldn't find any host named bugs.debian.org,. (#5.1.2) - clip Please note the trailing comma in the envelope recipient. Best, --Toni++ Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Packages reportbug depends on: ii python2.3 2.3.5-2 -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307457: kernel-image-2.6.10-1-686-smp: running into oom-killer: gfp_mask=0xd0 often
Package: kernel-image-2.6.10-1-686-smp Severity: important Hello, I find error messages like the one above (not sure about the actual value of gfp_mask) on a regular basis in the logs. Sometimes I just find out hard because the machine simply crashes shortly after. This makes the machine in question unreliable, crashing at least every few weeks. Therefore I'm flagging this bug as important. Hardware is a rather new IBM x205, with ServeRAID4, GigE, and 1GB RAM. Best, --Toni++ -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686-smp Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307457: kernel-image-2.6.10-1-686-smp: running into oom-killer: gfp_mask=0xd0 often
Hi, On Tue, 03.05.2005 at 12:16:51 +0200, maximilian attems [EMAIL PROTECTED] wrote: On Tue, 03 May 2005, Toni Mueller wrote: Package: kernel-image-2.6.10-1-686-smp Severity: important I find error messages like the one above (not sure about the actual value of gfp_mask) on a regular basis in the logs. Sometimes I just find out hard because the machine simply crashes shortly after. This makes the machine in question unreliable, crashing at least every few weeks. Therefore I'm flagging this bug as important. Hardware is a rather new IBM x205, with ServeRAID4, GigE, and 1GB RAM. you didn't report the error message?! dmesg after boot would also be usefull. Ok. I thought I was clear enough. The error messages I see are at least: oom-killer: gfp_mask=0xd0 oom-killer: gfp_mask=0x1d2 oom-killer: gfp_mask=0x4d0 anyway please try kernel-image-2.6.11 from unstable! This is currently impossible, due to #306930. Currently, I try to fix this (ie, create a local kernel-nonfree-... package). Dmesg: Linux version 2.6.10-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 SMP Tue Jan 18 03:03:11 EST 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 3ffd (usable) BIOS-e820: 3ffd - 3ffd8000 (ACPI data) BIOS-e820: 3ffd8000 - 3fff (ACPI NVS) BIOS-e820: 3fff - 4000 (reserved) BIOS-e820: fff8 - 0001 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fa460 On node 0 totalpages: 262096 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32720 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 IBM ) @ 0x000fe030 ACPI: RSDT (v001 IBMM51G 0x0001 IBM 0x0001) @ 0x3ffd ACPI: FADT (v001 IBMM51G 0x0001 IBM 0x0001) @ 0x3ffd0125 ACPI: ASF! (v016IBM 0x0100 0x) @ 0x3ffd0030 ACPI: MADT (v001 IBMM51G 0x0001 IBM 0x0001) @ 0x3ffd00cb ACPI: DSDT (v001IBM M51G0x1000 MSFT 0x010a) @ 0x ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee0 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec0, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: auto BOOT_IMAGE=2610 ro root=801 mapped APIC to d000 (fee0) mapped IOAPIC to c000 (fec0) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2666.565 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030856k/1048384k available (1700k kernel code, 16960k reserved, 711k data, 200k init, 130880k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5275.64 BogoMIPS (lpj=2637824) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 4400 CPU: After vendor identify, caps: bfebfbff 4400 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 0080 4400 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 per-CPU timeslice cutoff: 1463.12 usecs. task migration cache decay timeout: 2 msecs. Total of 1 processors activated (5275.64 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 Brought up 1 CPUs CPU0: domain 0: span 01 groups: 01 domain 1: span 01 groups: 01 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 4764k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry
Bug#307514: installation-reports
Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/alpha/20050501/sarge-alpha-netinst.iso uname -a: Linux fchelp 2.6.10-1-generic #1 Sun Mar 13 10:58:58 UTC 2005 alpha GNU/Linux (already upgraded to sid, install was done with default kernel vmlinuz-2.4.27-2-generic) Date: 5/2/2005 11:30 EDT Method: 'b dqa0 -fl i' at SRM, to find menu item with alpha serial console ttys0 Machine: AlphaServer DS10 (Tsunami Webbrick) Processor: Alpha EV6 466 Mhz Memory: 1Gb Root Device: scsi Root Size/partition table: (NOTE: partition table generated in Tru64) fchelp:~# fdisk -lu /dev/sdc Disk /dev/sdc: 9100 MB, 9100044288 bytes 64 heads, 32 sectors/track, 8678 cylinders, total 17773524 sectors Units = sectors of 1 * 512 = 512 bytes 8 partitions: # start end size fstype [fsize bsize cpg] a: 4096 20479 16384 unused0 0 b:20480 2117631 2097152 swap c:0 17773523 17773524 unused0 0 d: 2117632 10530815 8413184 ext2 e: 10530816 12627967 2097152 ext2 f: 12627968 12890111262144 ext2 g: 12890112 15676371 2786260 ext2 h: 15676372 17773523 2097152 ext2 fchelp:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc4 4140528907184 3023016 24% / tmpfs 515504 0515504 0% /dev/shm /dev/sdc7 137121220 1301536 1% /home /dev/sdc6 12283516116266 1% /tmp /dev/sdc5 982728151766778534 17% /var /dev/sdc8 103208820979640 1% /usr/tmp none 10240 5584 4656 55% /dev Output of lspci and lspci -n fchelp:~# lspci :00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3) :00:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) :00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) :00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c1) :00:0e.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 02) :00:0f.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05) fchelp:~# lspci -n :00:07.0 0601: 10b9:1533 (rev c3) :00:09.0 0200: 1011:0019 (rev 41) :00:0b.0 0200: 1011:0019 (rev 41) :00:0d.0 0101: 10b9:5229 (rev c1) :00:0e.0 0100: 1000:000c (rev 02) :00:0f.0 0100: 1077:1020 (rev 05) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[E] Reboot: [E] Comments/Problems: Everthing went well. While I have marked two things above as errors, they are not critical. Problem with installing the boot loader: I tried to *not* install aboot on the system, since d-i always messes with the beginning of my disk so that Tru64 can't read the label anymore. I wanted to do 'swriteboot' by hand, so I did not create an aboot partition, and d-i initially told me that it would not put aboot on the disk. But then after the packages were installed, d-i went ahead and tried to put aboot on the disk anyway. Even when the aboot installation fails the beginning of the disk is corrupted. The install can be saved, since the problem can be repaired by rewriting the disklabel in Tru64 and then running swriteboot by hand from another debian installation or bootable cd. But it would be nice if d-i would not corrupt the beginning of the disk, whether it writes aboot out there or not. Problem with reboot: For serial console-only systems, 'console=ttyS0' is not appended to the boot flags. If you think about it ahead of time, you can get into a shell from within d-i and 'fix' the aboot.conf by hand. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#307457: kernel-image-2.6.10-1-686-smp: running into oom-killer: gfp_mask=0xd0 often
Hi, On Tue, 03.05.2005 at 17:02:22 +0200, maximilian attems [EMAIL PROTECTED] wrote: On Tue, 03 May 2005, Toni Mueller wrote: On Tue, 03.05.2005 at 12:16:51 +0200, maximilian attems [EMAIL PROTECTED] wrote: oom-killer: gfp_mask=0xd0 oom-killer: gfp_mask=0x1d2 oom-killer: gfp_mask=0x4d0 anyway please try kernel-image-2.6.11 from unstable! This is currently impossible, due to #306930. Currently, I try to fix this (ie, create a local kernel-nonfree-... package). in oom cases 2.6.11 is very recommended as it has nice fixes from -aa in that release. thanks for this statement. I almost assumed as much after some research on Google... some remarks, though: I have an identical machine running 2.6.10 with no problems. Why does one machine exhibit this problem, and the other doesn't? here you'lll find the intersting non-free bits: http://www.acm.cs.rpi.edu/~dilinger/kernel-source-nonfree-2.6.11/ Thanks, this may speed things up considerably. do you have enough swap, is it activated? $ free total used free sharedbuffers cached Mem: 1033256 505200 528056 0 118348 168228 -/+ buffers/cache: 218624 814632 Swap: 2104220 02104220 Should be sufficient... ;-) Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#304054: moinmoin-common: migration script missing
Hi Jonas, On Mon, 11.04.2005 at 04:12:48 +0200, Jonas Smedegaard [EMAIL PROTECTED] wrote: On 10-04-2005 17:50, Toni Mueller wrote: the migration scripts 12_to_13_migN are missing. How do you mean missing? Are they not (as documented in README.migration) located at /usr/lib/python2.3/site-packages/MoinMoin/scripts/migration ? I did this: $ dpkg -L moinmoin-common|grep 12_to $ Although I looked in this README.migration, I didn't exactly try to follow this 'generic' hint, although you are right in so far as the files are there. Instead, these files are in the package python2.3-moinmoin which I didn't take into account. Darn! So let's at least downgrade to 'minor'. It is true that wikis created with the use of earlier unstable and testing Debian packages of MoinMoin does not work as-is with the most recent packages now in Debian unstable and testing. Manual upgrade of each wiki is necessary. I managed to do this, and apparently uncovered a bug on the way the MoinMoin people are already looking at. I have chosen to not support automatic upgrades of old wikis, as that would be too complex, because there is no central record of the wikis created on a system. Yes, this is quite understandable. But a bigger warning a la you need to shut down your wikis until you upgraded, possibly along with an option to bail out (like in the kernel-image packages) would imho be more appropriate since running with mixed code yields severly broken pages in the best case, and, according to the docs, corrupted data in the worst. I have chosen to not introduce the use of debconf notes to not make the packages unnecessary complex: The warning would be of use only for users of testing and unstable - those must be prepared for surprises, and this one does not include loss of data, only downtime of the service (and if you want you can install an older package and old wikis will work fine again). Thanks... I still wonder how users of woody will upgade once sarge hits the streets, then, and as to no data loss - the conversion scripts tell a different story. For users of unstable and testing (and stable as well) I can warmly recommend keeping track of at least NEWS items, by installing apt-listchanges. I do have this package installed, and indeed saw a message amounting to you need to upgrade manually. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#304054: moinmoin-common: migration script missing
Package: moinmoin-common Version: 1.3.4-2 Severity: important Hello, the migration scripts 12_to_13_migN are missing. Together with the automatic no-ask upgrade of moin, this renders any existing wikis non-functional (and it really takes you more than 5 minutes to upgrade, quoted from the docs). Best, --Toni++ -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.4.27-2-686-smp Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#173975: Top Notch Opportunity at low rates
Would you REFINANCE if you knew you'd save THOUSANDZ? Or get a Loan of 405,000.00, you already qualified. We'll get you the lowest possible rate. Don't believe me? Fill out our small online questionaire and we'll show you how. Get the home/house or car you always wanted, it only takes 35 seconds of your time. Click this link: http://www.ok-mrt-now.net/41.asp Best Regards, Toni Walker bodleian kgo prophylactic xnx dun sd antagonistic ibx ibis lvj ambiguous yv [2 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#301206: new release available
Package: silky Severity: wishlist Please update the silky package to latest upstream release, 0.5.4. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages silky depends on: ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libglade2-0 1:2.4.2-2library to load .glade files at ru ii libglib2.0-02.6.3-1 The GLib library of C routines ii libgtk2.0-0 2.6.2-4 The GTK+ graphical user interface ii libpango1.0-0 1.8.1-1 Layout and rendering of internatio ii libsilc 0.9.12-4 SILC library (silc-toolkit) ii libxml2 2.6.16-3 GNOME XML library ii zlib1g 1:1.2.2-3compression library - runtime -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#291290: mime.types issue in Silky
Hi Duncan and thanks for reporting this issue. This is actually an upstream issue, which will be fixed in upstream release 0.5.5. I got the information about this issue too late to get it fixed in upstream release 0.5.4. Tamas, could you contact me directly so we can create a patch against the new 0.5.4 release to get rid of the mime.types dependency. Silky doesn't actually use that file for anything at this time. Yours, Toni Willberg Silky developer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#299847: shift operator doesn't extend to longs
Package: python2.3
Version: 2.3.5-1
Severity: normal
*** Please type your report below this line ***
Hello,
I've tried to convert DJB's tai64nlocal program from C to Python. This
looks easy since the code can more or less be used 1:1 in both
languages, but requires proper handling of very long integers.
This is not the case: underway, the variables were turned negative after
shifts, and not extended. Exchanging the shifts (=) with
multiplications (*=) fixed the results. The code:
--- cut
import sys, string
from time import mktime, localtime
digits = { '0': 0, '1': 1, '2': 2, '3': 3, '4': 4, '5': 5, '6': 6,
'7': 7, '8': 8, '9': 9, 'a': 10, 'b': 11, 'c': 12,
'd': 13, 'e': 14, 'f': 15 }
def readTai64 (stamp):
secs = 0
nanosecs = 0
for i in stamp:
if i == '@': continue
if i 'f': break
print readTai64(%s): i= %s % (stamp, i)
u = digits[i]
secs *= 16
secs += nanosecs 28
nanosecs = 0x0fff
nanosecs *= 16
nanosecs += u
print readTai64(%s): u= %s secs= %s nanosecs= %s % (stamp, u,
secs, nanosecs)
secs -= 4611686018427387914
t = localtime(secs)
return [ t, secs, nanosecs ]
if __name__ == '__main__':
simulate tai64nlocal
for f in sys.argv[1:]:
for l in file(f):
print l: %s\n % l
stamp, body = string.split (l, ' ', 1)
print readTai64(stamp), body
--- cut
Test case data:
@40004238b09c2cc80704 something
should result in printing a time stamp of 2005-03-16 23:17:54.751306500,
but won't if you put back in the shift operators.
Best,
--Toni++
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-686-smp
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages python2.3 depends on:
ii libbz2-1.0 1.0.2-5 high-quality block-sorting file co
ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an
ii libdb4.24.2.52-18Berkeley v4.2 Database Libraries [
ii libncurses5 5.4-4Shared libraries for terminal hand
ii libreadline44.3-15 GNU readline and history libraries
ii libssl0.9.7 0.9.7e-3 SSL shared libraries
ii zlib1g 1:1.2.2-4compression library - runtime
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#299372: wordpress: Update shows blank front page
Package: wordpress Version: 1.5.0-1 Severity: grave Justification: renders package unusable Apparently letting it install the index.php that came with the upgrade I now found on the server makes it only show an empty front page. Looks like index.php is stripped of most of its contents. Was the file really broken upstream? -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.3-1-386 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages wordpress depends on: ii apache [httpd]1.3.33-4 versatile, high-performance HTTP s ii mysql-server 4.0.23-7 mysql database server binaries ii php4 4:4.3.10-8 server-side, HTML-embedded scripti ii php4-mysql4:4.3.10-8 MySQL module for php4 -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#299378: wordpress: Updated package doesn't update database
Package: wordpress Version: 1.5.0-1 Severity: grave Justification: renders package unusable After updating wordpress to a newer version, the database format seems to have changed. However, the package doesn't upgrade the database, and after a wordpress upgrade, it's impossible to post new posts or view comments. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.3-1-386 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages wordpress depends on: ii apache [httpd]1.3.33-4 versatile, high-performance HTTP s ii mysql-server 4.0.23-7 mysql database server binaries ii php4 4:4.3.10-8 server-side, HTML-embedded scripti ii php4-mysql4:4.3.10-8 MySQL module for php4 -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#273871: getting libsilc to Testing
Hi. I'm not a Debian developer, so I don't know (nor really care) about the policy. What should be done, and by who, to get libsilc package to Testing? There are more than one SILC client packages (GAIM's SILC plugin and Silky) on hold because of this. - Toni -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#296651: pcmcia-cs: Does not handle multiple cards in parallel, but in serial
Package: pcmcia-cs Version: 3.2.5-10 Severity: wishlist When I insert both of my NICs, the DHCP request and all other stuff stalls on the first card. Only after the DHCP requests have timed out, does it start making requests for the second NIC, etc. Any chance of making cardmgr multi-thread on this one? -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages pcmcia-cs depends on: ii debconf 1.4.45 Debian configuration management sy ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo ii modutils2.4.26-1.2 Linux module utilities ii psmisc 21.5-1 Utilities that use the proc filesy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#277652: failure to rotate one set of logs breaks all other rotations
Hi, I've stumbled over a very similar problem: after removing a package (squid2.7 in my case), no other logs were rotated anymore. That's sort of a show-stopper if you have some logs growing fast... Being forced to purge a package in order to keep using logrotate should even warrant raising the severity, imho. Best, --Toni++ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#291180: pidentd: patch for the path of the pidfile
tags 291180 + patch sid thanks Hi, the patch for correct pidfile location was in the previous version, but was lost with the new upstream release. It can be fetched back with: $ zcat pidentd_3.0.16-7.diff.gz | filterdiff -i '*/pidentd.h' That patch is also attached. -- Toni Timonen toni dot timonen at iki dot fi NP Solutions Ltd Helsinki University of Technology Department of Engineering Physics and Mathematics --- pidentd-3.0.16.orig/src/pidentd.h +++ pidentd-3.0.16/src/pidentd.h @@ -42,7 +42,7 @@ #endif #ifndef PATH_PIDFILE -#define PATH_PIDFILE /etc/identd.pid +#define PATH_PIDFILE /var/run/identd/identd.pid #endif #ifndef PATH_CFGFILE signature.asc Description: Digital signature
Bug#291636: pidentd: patch for the load issue
tags 291636 + sid patch security
thanks
Hi,
I managed to fix the issue. The original one I had on other(non-SMP)
machine that some java processes doesn't authenticate correctly, and
the problems arised when hammering a port(on a SMP machine; forgot to
mention explicitly, sorry).
The fix for the actual problem was already in 3.0.16-7 (assumably
written by Herbert Xu, basing on the patch made by Paul Szabo. See
#208290 for details), but didn't apply cleanly to the new
upstream version.
I rewrote/merged few parts that had problems applying cleanly. A patch
attached.
PS. As it seems (eg. according to #291180 ) there are few parts
missing from the previous debian diff. You might consider applying
them too. So, for convenience, also a cleanly applying patch
containing those missing parts not directly related to #291636 or
#291180 is also attached.
--
Toni Timonen toni dot timonen at iki dot fi
NP Solutions Ltd
Helsinki University of Technology
Department of Engineering Physics and Mathematics
diff -rub us/pidentd-3.0.18/debian/changelog
try3/pidentd-3.0.18/debian/changelog
--- us/pidentd-3.0.18/debian/changelog 2005-01-21 19:41:09.0 +0200
+++ try3/pidentd-3.0.18/debian/changelog2005-01-22 16:56:25.0
+0200
@@ -1,3 +1,10 @@
+pidentd (3.0.18-1.1) unstable; urgency=low
+
+ * Non-maintainer upload.
+ * Reapplied the TCPDIAG support patch.
+
+ -- Toni Timonen [EMAIL PROTECTED] Sat, 22 Jan 2005 16:56:08 +0200
+
pidentd (3.0.18-1) unstable; urgency=low
* New upstream release.
diff -rub us/pidentd-3.0.18/src/kernel.c try3/pidentd-3.0.18/src/kernel.c
--- us/pidentd-3.0.18/src/kernel.c 2004-06-13 10:47:52.0 +0300
+++ try3/pidentd-3.0.18/src/kernel.c2005-01-22 16:55:36.0 +0200
@@ -107,7 +107,7 @@
if (debug)
fprintf(stderr, ka_lookup(), attempt = %d, status = %d\n,
attempt, kp-status);
- if (kp-status 0)
+ if (kp-status = 0)
break;
if (attempt 2 (attempt 1) == 1)
diff -rub us/pidentd-3.0.18/src/k_linux.c try3/pidentd-3.0.18/src/k_linux.c
--- us/pidentd-3.0.18/src/k_linux.c 2003-01-09 01:02:26.0 +0200
+++ try3/pidentd-3.0.18/src/k_linux.c 2005-01-22 16:54:45.0 +0200
@@ -17,15 +17,28 @@
#include stdio.h
#include syslog.h
#include errno.h
+#include unistd.h
#include sys/types.h
#include sys/param.h
#include sys/socket.h
#include netinet/in.h
+#include netinet/tcp.h
#include arpa/inet.h
+#include linux/types.h
+#include linux/netlink.h
+#include linux/tcp_diag.h
+
#include pidentd.h
+struct kainfo
+{
+int nlfd;
+__u32 seq;
+FILE *proc_net_tcp;
+};
+
/*
** Make sure we are running on a supported OS version
*/
@@ -39,23 +52,85 @@
int
ka_open(void **misc)
{
-FILE *fp;
+struct kainfo *kp;
+kp = s_malloc(sizeof(*kp));
-while ((fp = fopen(/proc/net/tcp, r)) == NULL errno == EINTR)
- ;
+kp-seq = 0;
+kp-nlfd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_TCPDIAG);
+if (kp-nlfd = 0)
+goto out;
-if (fp == NULL)
+syslog(LOG_INFO, netlink failed, fallback to /proc/net/tcp: %m);
+kp-proc_net_tcp = fopen(/proc/net/tcp, r);
+
+if (kp-proc_net_tcp == NULL)
{
syslog(LOG_ERR, fopen(\/proc/net/tcp\, \r\): %m);
return -1;
}
-*misc = (void *) fp;
+out:
+*misc = (void *) kp;
return 0;
}
+static int
+netlink_lookup(struct kainfo *kip, struct kernel *kp)
+{
+int status;
+struct {
+struct nlmsghdr nlh;
+union {
+struct tcpdiagreq req;
+struct tcpdiagmsg rsp;
+} u;
+} buf;
+struct sockaddr_nl addr;
+
+memset(buf, 0, sizeof(buf));
+buf.nlh.nlmsg_len = NLMSG_ALIGN(NLMSG_LENGTH(sizeof(buf.u.req)));
+buf.nlh.nlmsg_type = TCPDIAG_GETSOCK;
+buf.nlh.nlmsg_flags = NLM_F_REQUEST;
+buf.nlh.nlmsg_seq = ++kip-seq;
+buf.u.req.tcpdiag_family = AF_INET;
+
+buf.u.req.id.tcpdiag_dport = kp-remote.sin_port;
+buf.u.req.id.tcpdiag_sport = kp-local.sin_port;
+buf.u.req.id.tcpdiag_dst[0] = kp-remote.sin_addr.s_addr;
+buf.u.req.id.tcpdiag_src[0] = kp-local.sin_addr.s_addr;
+buf.u.req.id.tcpdiag_cookie[0] = TCPDIAG_NOCOOKIE;
+buf.u.req.id.tcpdiag_cookie[1] = TCPDIAG_NOCOOKIE;
+
+status = write(kip-nlfd, buf, buf.nlh.nlmsg_len);
+if (status 0) {
+syslog(LOG_ERR, netlink_lookup: write failed: %m);
+return 3;
+}
+
+do {
+socklen_t alen = sizeof(addr);
+status = recvfrom(kip-nlfd, buf, sizeof(buf), 0,
+ (void *)addr, alen);
+if (status 0) {
+if (errno == ENOBUFS)
+return -1;
+syslog(LOG_ERR, netlink_lookup: recvfrom failed: %m);
+return 3;
+}
+} while (addr.nl_pid || buf.nlh.nlmsg_seq != kip-seq);
+
+if (buf.nlh.nlmsg_type != TCPDIAG_GETSOCK)
+return 0
Bug#291636: pidentd: New version is DoS-able and doesn't work well on load
Package: pidentd Version: 3.0.18-1 Severity: important Hi, the new version 3.0.18-1 has some problems when ran on machines having enough network traffic. First symptom that caused me to start looking was that sometimes java processes don't get authenticated correctly (very annoying when used with tomcat4 and ident authentication of postgresql). One way to reproduce the problem: -Run an irc server. -Put a torture script running: $ while [[ 1 ]]; do nc -z -v localhost 6667; done -Wait a while (15-30 seconds). -Try eg. indent-authenticate to postgresql server. Expected result (and behaviour of 3.0.16-7 in the same test): -Some system load -Running 7 identd processes -Some (one or two) zombies can be seen when repeatingly run 'ps -fA | grep ident'. -ident authentication works for other processes. Actual result: -Heavy system load. Some identd processes are running and eating all available cpu even after 5 minutes of actual port-hammering. -More than 100 identd -processes. -And the most important: authentication stops working. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-SMP Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages pidentd depends on: ii adduser 3.59 Add and remove users and groups ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libssl0.9.7 0.9.7e-2 SSL shared libraries ii netbase 4.19 Basic TCP/IP networking system ii passwd 1:4.0.3-30.7 Change and administer password and -- no debconf information -- Toni Timonen toni dot timonen at iki dot fi NP Solutions Ltd Helsinki University of Technology Department of Engineering Physics and Mathematics signature.asc Description: Digital signature
Bug#290261: debfoster: Curses-frontend
Package: debfoster Version: 2.5-4 Severity: wishlist I often have troubles when I'm removing huge umbrella packages like gnome-desktop-environment, because debfoster asks only once per package whether it should be kept or not. Leaning on my N key often deletes other packages I wanted to keep... Any chance of a simple curses frontend, I could simply browse up and down and then submit when I think I'm ready? -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.3-1-386 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages debfoster depends on: ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
