[Dx4win] CW with Windows xP with version 5.03
You can just copy the driver No need to re-install... File attached... Instructions below... The file I attached is the one distributed with 6.02... But I'm pretty sure it works with all versions... No harm in trying... Don't forget to delete or more/rename vich11.vxd, the 95/98 driver... FAQ: I get an error that the port driver cannot be found This error indicates that the port driver, the program that 'talks' to the LPT port, is missing. This typically happens when you copy all the DX4WIN files to a new computer without installing the port driver. You can correct this problem by copying the port driver to the correct directory. There are two port drivers: one for Win/NT, Win/2000 and Win/XP, the second one for Win/95, Win/98, Win/SE etc. When the correct driver is not available, you can still retrieve the driver from the DX4WIN installation program. You can retrieve individual files from the installation program dx4w602.exe. Add the /X parameter on a DOS command prompt, or create a link to the install program and add this parameter. See Appendix Files: portdriver for the name of the driver. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ON4AOI Sent: May 4, 2003 7:10 AM To: [EMAIL PROTECTED] Cc: DX4WIN reflector Subject: Re: [Dx4win] CW with Windows xP with version 5.03 Hi Roger, You have to reinstal DX4WIN because the CW driver needs to be installed in WINXP/system etc After that you can copy your complete backup back to the same directory 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm MY SALESPAGE with radioamateur computer parts http://www.on4aoi.be/sale.htm - Original Message - From: [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Sunday, May 04, 2003 9:57 AM Subject: [Dx4win] CW with Windows xP with version 5.03 Hi, I have just upgraded a computer from Win98SE to xP with the idea of then going up to version 6. BUT I now get the message; Cannot open CW Driver. As a backup I copied the complete directory from the Radio Computer to the Office machine. The CW Keyer works fine from this second machine running on Windows ME. The same thing has happened to my laptop with the upgrade from 98 to xP. HELP! Thank you and 73 Roger, g3kwk. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win --- StripMime Report -- processed MIME parts --- multipart/mixed text/plain (text body -- kept) application/octet-stream The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html ---
[Dx4win] Error creating new selection names
I noticed something similar creating a new Radio entry... I created a new entry starting with a character never used... ( i.e. ZIC781) then edited the resulting name later... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: April 18, 2003 11:14 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Error creating new selection names A while back I reported a problem with creating new filter selection names. Here's the scenario: Filter - Selection. Click on Add, and the top box now says Replace this Name -- so you start typing in that box. Here's the problem: If the first letter you type matches an *existing* selection, you are now editing *THAT* selection, and not the new one you created! For example, I have a selection called 2000 IARU. Say I want to add a date selection for calendar year 2000. I start typing 2000 in the top box, and now all of a sudden, the dates and check boxes get filled in as if I'm editing the 2000 IARU selection, which I am! If you save this selection, you will have over-written the old one. I found a work-around, which I don't recommend (it involves editing your .DXL file). Give the new selection some weird name like XYZZY -- it must be at least one character LONGER than the name you really want. Then save it. Exit DX4WIN and edit your call.DXL file using an editor like Emacs. Search for the weird name XYZZY and change it to what you want (in the .DXL file, it said XYZZYce this name, so I changed this to 2000Yce this name). In my case, since 2000 was shorter than XYZZY, I went back into the selection editor and carefully deleted just the last character from 2000Y to get 2000 clicked Update than OK. Paul, I hope you understand this problem and can come up with a fix in the next revision. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Main window modified when spots set bug
Actually I had wondered about it myself... Learn something new every day! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Alkoff Sent: March 25, 2003 11:52 PM To: dx4win; Paul van der Eijk Subject: Re: [Dx4win] Main window modified when spots set bug Paul, I never noticed the subtle point that qso's needing save were red and the spots need saving were in black! How could I have missed that? Thank you very much. 73, Larry On Tue, 25 Mar 2003 19:58:29 -0500, Paul van der Eijk wrote: Larry, This indicates that the spots need to be saved. When you see modified in red, it indicates the log needs to be saved. Paul At 07:22 AM 3/25/03 -0600, Larry Alkoff wrote: Using DX4Win 6.02 whenever I connect to an cluster the main window immediately indicates modified 120 and starts counting down. This should not be happening as I have made no log changes and it's very disconcerting to be confronted with an indication that the log file has been modified when I recall no such modification. I'd call this a bug. If it has been a while since I connected to a cluster I have no way of knowing if I made a change or not - which makes me very nervous about doing a Save. I notice if I actually to an Exit then DX4Win closes without the Save dialog which indicates that the log file has not really been modified and the appearance of the Modified flag is spurious. I absolutely _depend_ on the Modified flag in the Main window to tell me whether the log has changed so I can make the judgement to Save or not. This should be fixed. 73, Larry Alkoff N2LA Larry Alkoff N2LA - Austin TX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com Larry Alkoff N2LA - Austin TX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] IRQ COM PORTS
Yes... But you just select the Com port in DX4Win... The IRQ assignments are done in Windows... This isn't like DOS programs... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: March 21, 2003 4:57 AM To: dx4win@mailman.qth.net Subject: [Dx4win] IRQ COM PORTS Non standard IRQ for COM Ports. Is it possible to specify double digit IRQs e.g. 10, to serve as the packet port or any other port. Thank you Roger, G3KWK --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
You haven't got it hooked up correctly... On the LPT port... Pin 1 keys CW Pin 16 keys PTT It sounds like you are using pin 1 for PTT I don't know anything about Rigblasters... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Borowski Sent: March 16, 2003 4:07 PM To: [EMAIL PROTECTED]; 'Larry Gauthier' Cc: 'DX4Win Reflector' Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? That doesn't work either, Mel. The PTT relay in the RigBlaster then keys with every dit and dah or the radio PTT keys with every dit and dah in the CW mode. It would likely work if you were to disconnect and re-connect the PTT line for PSK31 but why not just allow the individual software control for individual selection of ports for CW and PSK31 PTT as it was in Ver 5.02/03 That wasn't broke and didn't need fixing! Now its broke! -=Rog-K9RB=- - Original Message - From: Mel Martin (VE2DC) [EMAIL PROTECTED] To: 'Larry Gauthier' [EMAIL PROTECTED] Cc: 'DX4Win Reflector' dx4win@mailman.qth.net Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT... I would think this would only be a problem if you are using a different radio for PSK31... So work-around 1 should work... Obviously workaround 2 won't unless you define a 2nd COM PTT interface for mmty and hook them up in parallel... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier Sent: March 16, 2003 1:41 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? In DX4WIN 5.x, the PSK SettingsTx screen allowed you to select the PSK keying com port from 1-8, and either RTS or DTR as the keyed line. The 5.x PSK selection was completely independent of the keyed line for CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are either the CW interface or VOX. What happened to the ability to independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, and the com port for keying in either PSK31 or MMTTY. As long as I did not attempt to simultaneously open the PSK window and run MMTTY, this arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK keying. It doesn't work. PSK does not key via the LPT port... although CW still works fine. Second work-around: Re-configure for CW keying via the com port. This allows CW and PSK to work properly, but prevents MMTTY from running. (DX4WIN grabs control of the CW port upon launch, and if you try to subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK31 config change in DX4WIN 6.02?
Yes it does... I'm doing it here... Hooked it up to LPT1 pin 1 and 16 just to try it out... Usually use a COM port... Who says there is a bug? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier Sent: March 16, 2003 4:16 PM To: [EMAIL PROTECTED] Cc: 'DX4Win Reflector' Subject: Re: [Dx4win] PSK31 config change in DX4WIN 6.02? Mel, Thanks for the note - and I agree that, theoretically, you should be able to key the rig from the same port that you use for CW (at least that's what the config menu says ;-). I am only using 1 rig here, so my work-around #1 _should_ work. However, in DX4WIN 6.02, the software has a bug. If you configure to key the rig in CW from a COM port, PSK is also keyed from the same COM port. If you configure to key the rig in CW from the LPT port, PSK keying via the same LPT port does not work. -larry K8UT - Original Message - From: Mel Martin (VE2DC) [EMAIL PROTECTED] To: 'Larry Gauthier' [EMAIL PROTECTED] Cc: 'DX4Win Reflector' dx4win@mailman.qth.net Sent: Sunday, March 16, 2003 3:24 PM Subject: RE: [Dx4win] PSK31 config change in DX4WIN 6.02? Hi Larry... You CAN use the LPT port to key both CW and PSK31/CW PTT... I would think this would only be a problem if you are using a different radio for PSK31... So work-around 1 should work... Obviously workaround 2 won't unless you define a 2nd COM PTT interface for mmty and hook them up in parallel... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Gauthier Sent: March 16, 2003 1:41 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 config change in DX4WIN 6.02? In DX4WIN 5.x, the PSK SettingsTx screen allowed you to select the PSK keying com port from 1-8, and either RTS or DTR as the keyed line. The 5.x PSK selection was completely independent of the keyed line for CW. In DX4WIN 6.02, it seems that your only choices for PSK keying are either the CW interface or VOX. What happened to the ability to independently choose a com port? In my 5.03 configuration, I had been using the LPT port for CW keying, and the com port for keying in either PSK31 or MMTTY. As long as I did not attempt to simultaneously open the PSK window and run MMTTY, this arrangement worked fine. Under 6.02, I attempted to work-arounds... neither which seem to work: First work-around: telling DX4WIN to use the LPT CW interface for PSK keying. It doesn't work. PSK does not key via the LPT port... although CW still works fine. Second work-around: Re-configure for CW keying via the com port. This allows CW and PSK to work properly, but prevents MMTTY from running. (DX4WIN grabs control of the CW port upon launch, and if you try to subsequently launch MMTTY you get a port conflict error.) Has anyone else encountered these problems? Does anyone have a suggestion on how to solve them? -larry K8UT --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] PSK change is DX4WIN 6.02
I don't see it's broken now... I've tried it here and it works fine on the COM port... It works fine on the LPT port... The only issue that I've seen raised is if one is using a different radio for digital modes... Otherwise why would you need more than one port to handle PTT. What am I missing? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of WC7N Sent: March 16, 2003 4:47 PM To: DX4WIN Group Subject: [Dx4win] PSK change is DX4WIN 6.02 I am sure glad to see this subject being discussed. I felt why if it isn't broke fix it but then was kind of told I was an idiot for thinking this wasn't a better way. I still feel IF IT AIN'T BROKE DON'T FIX IT. and it wasn't broke. But thankfully there are other PSK-31 program. Rod WC7N ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Controlling computer time
It can be changed... And you can add servers also... I'll dig up the instructions and post them -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dick Flanagan Sent: March 15, 2003 12:17 PM To: 'REFLECTOR DX4WIN' Subject: RE: [Dx4win] Controlling computer time At 08:06 AM 3/15/2003, someone wrote: XP has an Internet time function built-in. As far as I can tell, the automatic XP time synchronization is fixed at once each week with no means of reducing the time interval. Too bad D4 won't work. It seems like a much more flexible application. 73, Dick -- Dick Flanagan W6OLD NV SM E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Controlling computer time under XP
Instructions to change NTP polling interval in XP... http://www.winguides.com/registry/display.php/985/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dick Flanagan Sent: March 15, 2003 12:17 PM To: 'REFLECTOR DX4WIN' Subject: RE: [Dx4win] Controlling computer time At 08:06 AM 3/15/2003, someone wrote: XP has an Internet time function built-in. As far as I can tell, the automatic XP time synchronization is fixed at once each week with no means of reducing the time interval. Too bad D4 won't work. It seems like a much more flexible application. 73, Dick -- Dick Flanagan W6OLD NV SM E-mail: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] AboutTime Works Great Under WinXP Pro
Multiple time servers I agree... The rest 3rd party fix etc. is nonsense... Those of us that do this sort of thing for a living modify registry entries all the time... It's kind of like the old Win.ini file but better organized... The software you are adding is 3rd party Cliff... I'm using what came with XP... The parameter changes are perfectly safe... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cliff Ahrens - K0CA Sent: March 15, 2003 5:13 PM To: [EMAIL PROTECTED] Cc: 'DX4Win Reflector' Subject: Re: [Dx4win] AboutTime Works Great Under WinXP Pro Mel, you do need it under XP Pro if you want the capability to check multiple time servers, or if you don't want to install a third party fix to the WinXP Pro registry to change the 7 day interval for checking. AboutTime gives more options than XP's built-in time checker. Cliff K0CA - Original Message - From: Mel Martin (VE2DC) [EMAIL PROTECTED] To: 'Cliff Ahrens - K0CA' [EMAIL PROTECTED] Cc: 'DX4Win Reflector' dx4win@mailman.qth.net Sent: Saturday, March 15, 2003 3:02 PM Subject: RE: [Dx4win] AboutTime Works Great Under WinXP Pro Under XP pro... You don't really need it... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cliff Ahrens - K0CA Sent: March 15, 2003 1:10 PM To: DX4WIN Reflector Subject: [Dx4win] AboutTime Works Great Under WinXP Pro AboutTime works great under WinXP Pro. See: http://www.arachnoid.com/abouttime/index.html Cliff K0CA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Minor bugs wishlist
There is a sort of kluge... Put $$ (the current frequency macro) into QSO...Contest Mode... Text... (hardly intuitive!) and it puts the frequency into the QSO notes field. Much better than nothing, but I've been trying to convince Paul to format the notes field into separate fields for frequency/name/other-info for years... Much easier for import/export and macros... C'mon paul... Do it for version 7... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zoran Brlecic Sent: March 3, 2003 6:34 PM To: DX4Win Reflector Subject: [Dx4win] Minor bugs wishlist Minor bugs report for 6.02: When a progress report is selected, the displayed *frequencies* in MHz (not bands in meters) are cut off so that 1.8 MHz is displayed as .8 MHz and 3.7 as .7 MHz. Incidentally, shouldn't the progress report's WkdTotal reflect the actual worked total (a sum of worked + sent + confirmed), as opposed to worked + sent - confirmed? Also, since I only recently subscribed to the reflector, I don't know whether this has been brought up before or even beat up to death, but are you ever planning to implement the actual frequency display instead of (or in addition to) just bands? And, yes, I know about the Ctrl-R; that just doesn't cut it, unfortunately. I don't see how adding this can hurt the program - if anything, your revenue can only increase. Some other stuff I'd like to see: ability to index the Logbook by QSL Mgr, ability to resize columns in Logbook, radio buttons for frequently used functions, program maintaining Contest mode and Special keys after restarting, support for the W9XT contest card. Thanks for reading, 73 Zoran WA7AA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] No day/night update
Same here under XP... Seems you've found another bug for Paul... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of DL5NO Sent: February 23, 2003 2:54 PM To: dx4win@mailman.qth.net Subject: [Dx4win] No day/night update Hi, although both options Day and Night and Update Day and Night are activated (all other features within WorldMap/Options are inactive), the twilight-zone doesn't move automatically. Version ist Dx4WIN 6.02, running on WinXP. The feature worked fine in the 5.0x version. Is that a problem only on my PC afther the upgrade? 73 de Georg, DL5NO ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] xp cw drivers
Works fine here under XP... If you did an upgrade, I think you can re-install DX4WIN so that it installs the appropriate drivers... Or you can copy them manually... From the Help file (did you read it?) == Port Driver The installation script installs a port access driver to support CW keying using a printer port and the generation of the CW side tone: for Win/95/98: Windows\System\Vichw11.vxd for Win/NT/2000/XP: WinNT\System32\Divers\Vichw11.sys The help file also tells you how to extract these files... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Webb Sent: February 22, 2003 9:50 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] xp cw drivers Help,upgraded from me to xp...no cw drivers...HELP,73 john ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Dupes
I think this reply is misleading. It is trivial to eliminate dupes, if one is referring to exact duplicate log entries. It is simply a matter of merging the log into a new file which eliminates all dupes in one pass. Takes a few seconds... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: February 20, 2003 5:17 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Dupes Hi, Thanks very much for all of your responses regarding eliminating duplicate contacts from a single DX4WIN log. Actually, the correct response to my question is no. There is no utility or process for eliminating duplicate contacts within a single DX4WIN log. One can create additional logs and merge. Import or export. Or whatever. When one introduces other logs via the ADIF process, it gets even more complex and less reliable. In the end, this is a great weakness of the DX4WIN programs, although there are an enormous number of strengths. At any rate, thanks for the advice. 73s, Rick WO8L ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX Spots
I do not have this problem... Are you using telnet cluster or a Web cluster? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erik Hyllander Sent: February 20, 2003 9:00 AM To: [EMAIL PROTECTED]; dx4win@mailman.qth.net Subject: [Dx4win] DX Spots Hello users of DX4WIN, last Feb. 15 I posted the folloowing message: Another observation is that all spots from internet are lost after exit from DX4WIN. When I use my normal set-up to the local DC-cluster via 144 MHz spots remain. Now the two cases are identical i.e. spots are lost when opening DX4WIN again, v 6.02. I have the impression that it was ok in the beginning, there are spots saved from from Feb. 9 and 10. This has nothing to do with checking 'Leave all windows in original position' in Preferences/Screen. I think it is of value to save earlier spots in this window to check where a station has been operating etc. Paul, please put it back in the next version, it works ok in v 5.03. Now, I got the idea to reinstall 6.02 and found that when I had it running in DEMO mode the spots remained after exit and restart BUT as soon as I put my SM0LZT.key in, this function was gone. I got one answer from AD1C/Jim who has not this problem. Are there any others having the problem? Using W98SE. Erik Erik Hyllander, SM0LZT e-mail: [EMAIL PROTECTED] alt.: [EMAIL PROTECTED] Packet: [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Dupes
I have a solution Importing doesn't remove dupes... But merging does... Create a new empty file... Merge the file with dupes... It will discard the dupes... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: February 17, 2003 4:56 PM To: dx4win@mailman.qth.net; dx4win@mailman.qth.net Subject: [Dx4win] Dupes Hi, I have posted this message a couple of times and am still looking for an answer. What is the quickest, most efficient way to recognize and elminate dulpicate QSOs in DX4WIN? This would include merged DX4WIN files and imported ADIF files. All of the QSOs, whether generated within DX4WIN or imported, would be contained within a single DX4WIN log. Is there any simple way to do this? Thanks, Rick WO8L ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] 6.0x Misc.
Re PF3 on XP pro with RAC loaded to disk... I do not see this behaviour... The PSK31 double-click seems not to work... But I've never used this feature... So I'll make sure it isn't cockpit error The lookup here is instantaneous... So maybe the first problem is with using the CD... But it makes sense that lookup begins after the third character is typed... Or perhaps on exiting the box... I think more info in the prior Q is a good idea... but not hi priority... Sun time at DX is obvious from the map if day/night is enabled... Agree re grey-black... But some of this is arguable either way... Call on SWL card... Not necessary.. But wouldn't hurt... And one more pitch for the next major release... On real time entry... F10 saves the QSO and logs start time... But keeps current QSO on screen... Enter saves QSO and sets stop time... The way it works now is perfect for Dxing... But the change would take care of casual logging and other countries logging requirements... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul van der Eijk Sent: February 12, 2003 12:12 AM To: J. F. Samuels; DX4WIN List Server Subject: Re: [Dx4win] 6.0x Misc. John, I'm mixing my comments; starting with *** 1. Existing 6.02 problems (under Windows XP Home anyway) o PSK31 mouse double click still does not populate the QSO window fields properly (known bug) This has been reported previously, but typically for systems that upgraded to XP. On a number of XP systems this works as expected. Looks more like a MS upgrade issue to me at this time. o If my packet, RTTY or rotator window fails to open (local problem with USB ports and RF), the next time I open DX4WIN those windows are all over the place, not where they belong. I have to re-set them. Have to check this o The packet, and maybe RTTY, input area does not remember its size setting. It must be reset every time I open DX4WIN (already reported). *** Known issue; caused by changes in one of the libraries that I use and I have not found a work around. o PF3 causes a large DOS box to appear before the callsign/lookup window appears when DX4WIN is opened with a shortcut. Changing the Startin folder does not help. If DX4WIN is opened directly from the .exe file, no DOS window appears. This problem has also been reported. *** And I have no clue what is causing this to be different. What data source are you using? Just wondering if other XP users see the same? o Re above, if I set Automatic Update, a search begins on the first character typed with no delay, which ties things up for a while and prevents me from completing typing the call *** On-line has a warning about this; bet you have the callsign update option enabled. 2. Wish List o Green-reverse spots when not confirmed even when the contact contributes to nothing (as discussed) *** Done for the next release o Ability to copy a few lines from the packet window so I can paste them into a manager's address window *** Works for me; I think you have to be in holding mode for this to work (to stop text coming in) o Ability to customize fields and their sequence in the Same Call window (I would like to add QSL method, Label?, etc.) *** Will check that out, but not sure how much demand there is for this o See local time in the DX Sunrise/Sunset - Info window -- wasn't that there once? *** This display now uses the 'closest' info available (like state, iota). Old version only used the country information which had a somewhat 'bogus' field containing the time difference for the country with UTC. If I can estimate the local time based on the longitude we would be in business again. o Revert the map to 5.03 where I could see a highlighted country much more clearly *** Not sure what has changed here; highlighted country is shown in Yellow as was done in 5.03 o Double click on RTTY fields to populate QSO fields *** In the planning stage; had more requests for this o Use gray for disabled modes/bands only. Use black for confirmed mode and band. Be able to ignore both. *** Had a few requests for this, but not enough to make this change. Many users are used to the current setup and consequences. (Spots become gray when you work a station that was previously listed as important for example) o Station worked as part of SWL card *** This comes up so now and then, and I don't see the need for this. You confirm to the SWL that you were indeed active on that time on that band. That is what SWL is about. 73, John, K2CIB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Icom IC-910H errors
Works here on 440... Are you sure you don't have the radio split... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edgar Brown, N6OU Sent: February 12, 2003 5:39 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] Icom IC-910H errors DX4win v6.02 shows band and mode information properly. When I attempt to put the frequency data into Notes for this QSO with contol R it does not transfer the data correctly on 70 and 23 cm. It transfers the 2 meter information correctly. Example: 440.620.0 transfers as 461,417 KHz and 1247.300 0 transfers as 461,417 KHz. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Internet connection
Do have a firewall?... If so, have you given the dx4win executable permission to access the net? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tibor M. Blum - IK2SAI - Sent: February 9, 2003 3:51 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] Internet connection In these days i tried the internet cluster Changing the com port to tcp/ip i get a msg from dx4win saying telnet failing, no connection activebut i'm ok on the internet. Where am i wrong? Some years ago i tried the same anf everything was ok. Tibor, IK2SAI (DX4WIN 602 but also with 503) --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Vers. 6.02
For the RAC lookup... Right click on the window and check Automatic Update ... He knows about the QSL manager date problem The 3 digit reports are to accommodate modes other than SSB... But I agree about making a preference on this... I've asked Paul the same thing... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stefano Cipriani Sent: February 9, 2003 9:11 AM To: KK4HD Paul (dx4win); dx4win/reflector Cc: NR4M Steve (dx4win) Subject: [Dx4win] Vers. 6.02 Hi Paul, Can You modify the V.603 to fix these problems? - 1st - Just installed V.602 and migrated .INI file from my V.503. On it there are a couple of labeled items about the custom 1 and 2 label definitions, as you can see: [CustLab1] LabelID=3DCustom1 Metric=3D1 SpacingTop=3D0.039 SpacingLeft=3D0.039 SpacingHeight=3D1.169 SpacingWidth=3D2.756 LabelHeight=3D1.091 LabelWidth=3D2.717 RightShift=3D0.000 DownShift=3D0.000 PageWidth=3D8.268 PageHeight=3D12.028 NumAcross=3D3 NumDown=3D10 PaperName=3DCustom Portrait=3D1 [CustLab2] LabelID=3DCustom2 Metric=3D1 SpacingTop=3D0.787 SpacingLeft=3D0.315 SpacingHeight=3D3.189 SpacingWidth=3D3.327 LabelHeight=3D3.110 LabelWidth=3D3.307 RightShift=3D0.000 DownShift=3D0.000 PageWidth=3D4.134 PageHeight=3D5.315 NumAcross=3D1 NumDown=3D1 PaperName=3DCustom Portrait=3D1 After merging the .ini file, all the custom label fields are setting to zero, and I must insert all the custom label definitions manually. I already made You aware of this problem also on V.503 - 2nd - Editing Custom Labels: The MaxQSO size field is common to both custom1 and custom2 labels record. Changing the custom1 label value You change also the custom2 label value and viceversa. But I need to set the Custom1 to 3 max qso, and the Custom2 to max 10 qso or more (printing directly on the card). I'm very disappointed to change this datum all the time when I change label size! I already made You aware of this problem also on V.503 - 3rd - Accessing to R.A.C.: When I press F3 to read the RAC info, I can read the data correctly. But switching to other qso, the RAC window rest inactive, showing the previus data. I must press F3 any time I want a new info. (Very tedious!!) On V.503 it runs well, showing itself a new info on any new qso selected. - 4th - In V.602 the SSB reports changed to 3 digits - I am not happy about it. I have never used 3 and I wish there was a small radio button in preferences that allowed me to pick either 2 or 3 digits. Better yet the 3rd digit of the report could be listed under DISABLED FIELDS!! (requested also by tonno/es5tv). - 5th - Manager database: After an importing qsl manager file (.txt), I found wrong dates on its database!! Urgent to fix!!! - 6th - Filter selection: As qsl manager I appreciate very much the dx4win facility to load several logs on the same file, selecting each time the one to up to date. Unfortunately sometimes (adding, merging or importing new qsos) I have a mishop, because I forget to change the PREFERENCE|QSO|GROUP|# after making the QSO|FILTER|SELECTION of the specified log group (for instance the #5). The result is that all qsos I want added on the selected log #5 are added on the log #1 (as predisposed on FILE|PREFERENCES|QSO|GROUP|#), with hard problems to restore the right situation (re-install the backup file and repeat the qso adding). I should like that the QSO|GROUP|# in the QSO window have an automatic change, according to the QSO|FILTER|SELECTION activated. In fact, if I select a specified group, I want to work on it only!!! Why not improve an automatic QSO|GROUP|# change, in presence of the QSO|FILTER|SELECTION switched NOT ZERO? In short, I should like the QSO|GROUP will be fixed: - equal to PREFERENCE|DEFAULT FOR NEW QSO|GROUP if the FILTER|SELECTION is not activated (set to zero). - equal to FILTER|SELECTION|# if the FILTER|SELECTION is activated (not zero). Only few lines of code needed, I think, as: IF [QSO|FILTER|SELECTION] =3D=3D 0 [QSO|GROUP|#] =3D=3D [FILE|PREFERENCES|QSO|GROUP|#] ELSE [QSO|GROUP|#] =3D=3D [QSO|FILTER|SELECTION|#] ENDIF I already made You aware of this problem also on V.503 - 7th - When importing QSL Managers or Managers' Addresses would like to see which entries were changed!! Not just Replaced 55 and Added 32. There could be messages the same way as when merging CTY files! (Maybe I need to restore some data!!) (requested also by tonno/es5tv). That is all for the moment. I'm testing I hope it is of help! Ciao Steve Stefano Cipriani / I=D8MWI http://www.qsl.net/i0mwi e-mail: [EMAIL PROTECTED] - In and outgoing mail scanned with NAV 2002 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Green on white spots
If the same station is spotted that you've worked before... It should be black... If it's a different station it should be red... But I'm not sure which way DX4Win works... I'll have to test it... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: February 6, 2003 5:22 PM To: Dave Jaksa; 'Wendell Wyly W5FL'; dx4win@mailman.qth.net Subject: RE: [Dx4win] Green on white spots It's hard to explain, but there are those of us who like to work every country on every possible band/mode combination. It's a sickness, I'll admit it. Here's how I think of the colors (sorry, no priority numbers for me): DU9RG is spotted on 40 meter CW. I have never worked DU on 40 meters, so the spot is bright red. So I work him for a new one. Now if DU9/N0NM is later spotted on 40 meter CW, the spot will be light red (worked but not confirmed on this band). Doesn't matter if it's spotted on SSB, same will apply, since it's not confirmed on this band.
[Dx4win] Green on white spots
Actually it's grey once you work it... Something I'm not sure I agree with... Think it should be black... Grey should be just those spots you have indicated you don't want to see at all... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mel Martin (VE2DC) Sent: February 6, 2003 7:30 PM To: [EMAIL PROTECTED]; 'Dave Jaksa'; 'Wendell Wyly W5FL'; dx4win@mailman.qth.net Subject: RE: [Dx4win] Green on white spots If the same station is spotted that you've worked before... It should be black... If it's a different station it should be red... But I'm not sure which way DX4Win works... I'll have to test it... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: February 6, 2003 5:22 PM To: Dave Jaksa; 'Wendell Wyly W5FL'; dx4win@mailman.qth.net Subject: RE: [Dx4win] Green on white spots It's hard to explain, but there are those of us who like to work every country on every possible band/mode combination. It's a sickness, I'll admit it. Here's how I think of the colors (sorry, no priority numbers for me): DU9RG is spotted on 40 meter CW. I have never worked DU on 40 meters, so the spot is bright red. So I work him for a new one. Now if DU9/N0NM is later spotted on 40 meter CW, the spot will be light red (worked but not confirmed on this band). Doesn't matter if it's spotted on SSB, same will apply, since it's not confirmed on this band. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Green on White Spots
There is an issue of audio alerts... Changing color doesn't address that... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Currier Sent: February 6, 2003 6:16 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Green on White Spots I think the best solution would be to add another color combo for un-worked band/mode combos. If the user is happy with the present system, simply change the new color scheme to green on white, so it has the same look as it does now in 6.02. For those that want to know whether or not a band/mode combo is new, then they will have a new color scheme to know that. (Regardless of whether or not it counts for an award.) Don W0DJC ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Priority 6 Spots Definition
Well.. If you saw my previous most on a similar problem with new country (which is mitigated by a check option)... And a suggestion on how to address it... So we now have 1. All time new country (reverse yellow yellow on black?) 2. All time new mode award (reverse red) 3. All time new band award (reverse blue) 4. All time new mode/band no award (reverse green) 5. Country not confirmed (yellow black on yellow?) 6. Mode award not confirmed (red) 7. Band award not confirmed (blue) 8. Band/mode not confirmed no award (green) 9. The Present Black 10. The present Grey I think that takes care of all possibilities... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Hawes Sent: February 2, 2003 8:29 AM To: dx4win@mailman.qth.net Subject: [Dx4win] Priority 6 Spots Definition From the help, the definition of Priority 6 on spots is: 6 Band/Mode not conf green on white Worked one or more stations using this band/mode combination but none of these contacts have been confirmed. However, incoming spots are assigned Priority 6 for not only the above definition, but also for cases of Band/mode not worked. Since I am primarily interested in new band/mode QSOs, I had hoped that the new version would be able to set a color for that particular and specific case. Perhaps it does, and I'm missing a setting somewhere. For now, any green on white spot needs to be checked individually. Help anybody? 73 - Dave N3RD ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Version 6.01 and Windows XP
I have a possible workaround that works here Interestingly, the Alt-S works if the focus is on the Main Window... Where the file menu is... If You avoid Alt-S and use the File - Save menu... It seems to save reliably... It might be useful if those who have duplicated the problem could verify if this is the case with their computers also... If this is the case... I would recommend that anyone using XP, Win2000 (not ME) and possibly NT avoid the Alt-B and Alt-S shortcuts until the problem is resolved... Since I noticed that under some conditions they work, and sometimes they fail... Remember... If it fails with Alt-S you lose any changes to the file since the last backup... Best be safe... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William Liporace - NA2NA Sent: January 31, 2003 6:00 PM To: DX4WIN POSTINGS Subject: Re: [Dx4win] Version 6.01 and Windows XP I will second this... I confirmed it on a XP Professional Will NA2NA - Original Message - From: Don Currier [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, January 30, 2003 9:04 PM Subject: [Dx4win] Version 6.01 and Windows XP Hello All, Installed 6.01 on a computer with XP operating system. Few of observations. I like the Alt+S save feature in Version 5.03, and I believe that it should be available in version 6.01, but when I enter a contact in 6.01, and then use the Alt+S keystrokes, DX4WIN closes. The whole program closes, not just my log file. I loaded version 6.01 onto a computer running Windows ME, and I can use the Alt+S feature just fine. Anyone else running 6.01 on XP and having the same problem? Also, I have set the map options to Show Spot Country, but I'm not seeing the spot countries prefix or the country being highlighted on the map as spots roll by on the cluster. Again, just me, or is there a problem? Lastly, and I noticed this on both ME and XP, when I merged my .cty files, there were quite a few contacts that had to be cleaned up to get my country counts correct to what I had in version 5.03. FO prefixes, 3X0C/LU, VK9's, some of my K5K contacts, some of my K1B contacts, some FR stuff, VP6DI contacts, etc., had to be cleaned up. Might not be a bad idea to check up on contacts with multi country prefixes. 73 All Don ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] All my satellite QSOs are missing!
Won't this lose all SWL confirmations? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul van der Eijk Sent: January 29, 2003 7:58 PM To: Robert Dannals; Dx4win@mailman.qth.net Subject: Re: [Dx4win] All my satellite QSOs are missing! Robert and Others, Looks indeed like a conversion problem reading old logs. Try the following: 1. In version 5.03 export your log using the dx4win4 filter 2. Close version 5, start version 6 3. Open your 'bad' log file 4. Delete all QSOs (this will preserve any selection definitions and groupnames you have in your log) 5. Import the log saved in step 1 using the dx4win4 filter Sorry for the inconvenience, Paul At 06:02 PM 1/29/03 -0500, Robert Dannals wrote: Just upgraded to v 6.01 from 5.03. I moved a copy of log over from 5.03 SAVE directory to the 6.01 SAVE directory. Looked at my country totals, they are a bit off (1 here or there lower; presumably need to do something with merging the old and new country file). But the big problem is that all my satellite QSOs are missing. They don't even show up in the 6.01 version . . . like they never existed! But they do show up just fine in 5.03. Thoughts? 73, Bob - W2GG -- --- Robert F. Dannals, Ph.D.Division of Nuclear Medicine Professor, Radiology Johns Hopkins Medicine PET Center 600 North Wolfe Street, Nelson B1-150 [EMAIL PROTECTED] Baltimore, MD 21287-0816 phone: (410) 955-2916 fax: (410) 955-0691 beeper: (410) 283-7057 Alphapage: [EMAIL PROTECTED] -- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] V6.01 - adjustable map colors for land
There are a few outstanding minor bugs with the map... That's one of them... There are a few calculation problems with the Albers Conic... That's why it's greyed... And you know about the county search... And worst of all... Toronto is shown as the Capital of Canada... Much to the dismay of people from Ottawa (the actual capital)... Nothing worth holding up the release of ver 6. I can't speak for Paul, but I suppose he will post the corrected binary when he has it available. I believe the map code is written by a third party... Not by Paul himself. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard Eckman Sent: January 29, 2003 8:02 PM To: dx4win@mailman.qth.net Subject: [Dx4win] V6.01 - adjustable map colors for land Has anyone been able to adjust the land color on the Map in the new version? The water color is easily adjustable, but the land color adjustment just doesn't seem to take. Is there some trick to getting this to work? Rich Eckman KO4MR Hampton, VA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] 6.1 and PSK
Yup.. That's it... My PSK31 is working fine with PTT -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ON4AOI Sent: January 30, 2003 5:37 PM To: WC7N Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] 6.1 and PSK 5. In summary my problem is that I need to tell DX4WIN that I am using COM 4 to key the RigBlaster so the signal is passed to the mike input of the transceiver. Hi Rod, In the PSK31 Settings|TX section is the possibility to mark USE CW CONTROL this means it follows your preferences|SETTINGS for CW/PTT if you specify CW/PTT via LPT(x) then it will be keyed via this LPT(x) port if you specify CW/PTT via com(x) then it will be keyed that serial port 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm MY SALESPAGE with radioamateur computer parts http://www.on4aoi.be/sale.htm - Original Message - From: WC7N [EMAIL PROTECTED] To: DX4WIN Group dx4win@mailman.qth.net Sent: Thursday, January 30, 2003 9:42 PM Subject: [Dx4win] 6.1 and PSK 1. I use a Rigblaster in line with my computer to key PSK-31. This has always been done through COM 4. 2. In the old DX4WIN if you clicked on Settings|TX there was a spot to specify the COM port for PSK-31 transmitting. 3. While the TX flag is in the new version it does not give me the ability to specify what COM port it is to use. Therefore, I am unable to key the transmitter in the PSK mode. The receive is fine and a double check with the old DX4WIN showed no problems with receive. or transmit . 4. Does anybody have the answer for my problem. 5. In summary my problem is that I need to tell DX4WIN that I am using COM 4 to key the RigBlaster so the signal is passed to the mike input of the transceiver. Help please. Rod WC7N [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] All my satellite QSOs are missing!
Do a search for all QSO's on 13cm... That's where mine are!!! There is obviously an problem created with the additional bands... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Dannals Sent: January 29, 2003 6:03 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] All my satellite QSOs are missing! Just upgraded to v 6.01 from 5.03. I moved a copy of log over from 5.03 SAVE directory to the 6.01 SAVE directory. Looked at my country totals, they are a bit off (1 here or there lower; presumably need to do something with merging the old and new country file). But the big problem is that all my satellite QSOs are missing. They don't even show up in the 6.01 version . . . like they never existed! But they do show up just fine in 5.03. Thoughts? 73, Bob - W2GG -- --- Robert F. Dannals, Ph.D.Division of Nuclear Medicine Professor, Radiology Johns Hopkins Medicine PET Center 600 North Wolfe Street, Nelson B1-150 [EMAIL PROTECTED] Baltimore, MD 21287-0816 phone: (410) 955-2916 fax: (410) 955-0691 beeper: (410) 283-7057 Alphapage: [EMAIL PROTECTED] -- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Additional Search Features
I suppose that's the problem with generating Cabrillo. Contesting logging programs require contant fixes und upgrades to keep up with the contests... Since DX4Win is not intended primarily as a contest logger... Adding Cabrillo would necessitate constant tweaking to get the Cabrillo correct. It's not a standard like ADIF where the format is fixed over time. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wendell Wyly W5FL Sent: January 26, 2003 12:16 AM To: Gary McConville; Dx4win@mailman.qth.net Subject: RE: [Dx4win] Additional Search Features Writelog is good at generating Cabrillo. If you watch the writelog reflector, it is evident that an effort is required to generate the proper cabrillo file for each contest and sponsor. I built several Cabrillo files by hand for the ARRL contests and decided that WriteLog was a good investment. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Gary McConville Sent: Saturday, January 25, 2003 4:26 PM To: Dx4win@mailman.qth.net Subject: Re: [Dx4win] Additional Search Features I'm setting myself for a few shots but I'm still waiting for a cabrillo format on report saves... Gary - WB4SQ --- Paul van der Eijk [EMAIL PROTECTED] wrote: Don, It is all there in 5.03 already. 1. File preferences | QSO | Searching | QSO Date: select 'Range' 2. In QSO Window: F8 to start a search 3. Select 80M in the band 4. Select N for confirmed 5. Select 01/01/1950 or something for QSL date (indicates card has been sent) 6. Enter 01/01/2000 in the date and press Enter Because of step 1, you get a prompt for the ending date; enter 01/01/2003 If the logbook window is open, you will see a list of all QSOs matching your criteria; PgUp and PgDn in the QSO Window will show you the different QSOs. There is a lot more you can do with searching; read the on-line help and the user's guide about filters, selections. Also check Mailed cutoff and worked cutoff in File | Preferences | Personal. Paul At 03:51 PM 1/24/03 -0500, Don Prater wrote: Paul, I was wondering if you got my post on providing additional search feature for DX4WIN? Being able to use the attributes in the country window W,M,C,S,and checked? Perhaps they could be included as options in the reports generator in the Summary Report. The ability to search a predetermined time frame. Example: Search for QSOs on 80 meters mailed but not confirmed from 1/1/00 to 1/1/03. 73...Don ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] FM Martinique, or FM, the Mode
Probably couldn't make up it's mind if it was FM or CW ;-) DXCluster spot formats don't standardize the mode... Was meant for human eyes. Paul scans the spot's comments to determine if anything in it states the mode... You can guess what happened... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Frank Grossman (WB2BXO) Sent: January 26, 2003 2:16 AM To: dx4win@mailman.qth.net Subject: [Dx4win] FM Martinique, or FM, the Mode Noticed an amusing problem last evening; when I highlighted FM5CW, spotted on 7005, right clicked, then selected listen, my IC-765 on Com 2 went to the frequency, but in FM mode! I've noticed this a few times before with spots for Martinique, but corrected the problem at the front panel and forgot about it. Has anyone else noticed this? Is there a known fix or workaround? 73, Frank [EMAIL PROTECTED] ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Ver. 6
My findings also... I like DXBase... But it was very slow on my Pentium at the time. It's advantage is it uses the Microsoft Jet DB... But that's it's disadvantage too! Also I find DX4Win more efficient in it's use of screen real-estate. You should have waited a few more weeks. Paul won't release a program until he is sure it is stable... But it's worth the wait. Oh well... DXBase is nice too... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Naumann - N5NJ Sent: January 25, 2003 8:47 AM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver. 6 I have found that to be true also. DXBase is a very resource intensive program. It takes forever to load and once it does, it's very slow. This contributed to my decision to go with DX4Win several years ago. In contrast, DX4Win is a very efficient program, works well while other things are running, and even 5.03 does everything I *need*. My expectation is that the new version will be excellent also, and will be well worth the wait. I'm curious what is so urgent that the release of version 6 is not soon enough? 73, Bob N5NJ - Original Message - From: A. Sewell N5NA [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, January 25, 2003 7:34 AM Subject: Re: [Dx4win] Ver. 6 That's too bad. A friend of mine just ordered DX4WIN and was asked if it could be shipped in a week or two as a new version was coming out. That was a week ago so I wouldn't be surpised to see the new version announced any day now. My friend has DXbase but has been so disappointed with it that he is going to DX4WIN. 73, Alan N5NA - Original Message - From: WL7M [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, January 25, 2003 0:23 AM Subject: Re: [Dx4win] Ver. 6 Not soon enough for me - I just bought DXBase. Tired of waiting. 73, Joe WL7M At 04:14 PM 1/24/2003, C M wrote: When is version 6 of DX4WIN going to be released? --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.445 / Virus Database: 250 - Release Date: 1/21/2003 --- StripMime Report -- processed MIME parts --- multipart/mixed text/plain (text body -- kept) text/plain (text body -- kept) The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DXBase?????
Or that you had to PAY to obtain Y2K compliance for a product bought in 1998... I was mildly irritated at that ;-) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Clark Sent: January 25, 2003 9:34 AM To: REFLECTOR DX4WIN Subject: [Dx4win] DXBase? I have run DX4Win for a few years now. But I still remember very well, after running DXBase for a good while, that I was charged $29.95 for the 3 1/2 inch floppy to change to my new call sign after upgrading . Did not take long to discover DX4Win after that. 73 BILL-W5VW - Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] RE Upgrade
You can log the power in the QSO Notes... In fact, if it's usually the same... Put it in the same place you put the macro for logging the frequency... Logging start-stop seems to still be an issue... I wouldn't mind that capability myself... I would still like a separate boxes for Freq Power Op's name Maybe ver 7... Charges are nominal... Price you pay for ongoing support... I've looked at them all, and still like DX4Win best... Though nothing's perfect... For example, I like some of the features in another program that has very nice support for up to 4 radios... But the demo blew up on me twice... Maybe my fault... But I lost interest! DX4Win is still missing some features I'd like to see, but it's stable, has an easy to manipulate user interface, is very quick, updates award tracking in real time and isn't missing anything critical... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Henderson Sent: January 25, 2003 4:34 PM To: Dx4win@mailman.qth.net Subject: Re: [Dx4win] RE Upgrade - Original Message - From: Larry Gandy [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Saturday, January 25, 2003 7:08 PM Subject: [Dx4win] RE Upgrade I do not think I will upgrade to soon as I did not see much in it that I can use here on the snip I've had several logging programs over the last few years. The last one was Turbolog but as time went by it became more and more out of date. There were constant promises of upgrade but they never happened so I moved on. I moved on to DX4WIN. This suits me at present but I don't necessarily feel any loyalty to it. When its time to move on that's it. Bye. At present there are few irritations: 1. No start and finish times 2. No power box Both are required to be recorded by the British licensing authorities. 3. I doesn't seem to integrate with a decent rtty program like mmtty. Any new version is going to cost money and there are products out there that don't cost anything. Logger for one. What is likely to keep me loyal is the bloody hassle of converting my logs and the learning curve of getting to know the new brand. 73 Bill ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] RE: ...How to link...
Did you use FAT or NTFS?... They are 2 different disk architectures... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rene Willekens Sent: January 23, 2003 3:39 AM To: 'J. F. Samuels'; 'DX4WIN List Server' Subject: [Dx4win] RE: ...How to link... Hello John, I had that problem before with psk in DX4WIN 5.03 and WindowsXP Pro, I formatted the disk drive with fat ntfs and reinstalled WindowsXP Pro and DX4WIN and all the problems being solved. I put the call manual in the qso window and can use the F-keys in the RTTY window from DX4WIN and the macro's from MMTTY together I disable all the f-keys in MMTTY from the macro's so I can used them in DX4WIN and use the mouse for the macro's . I t works fine on this way ! 73 de ON6OM Rene In and outgoing mail scanned with NAV 2003 -Original Message- From: J. F. Samuels [mailto:[EMAIL PROTECTED] Sent: donderdag 23 januari 2003 3:54 To: [EMAIL PROTECTED]; DX4WIN List Server Subject: Re: ...How to link... You wrote: Reply-To: [EMAIL PROTECTED] From: Rene Willekens [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Date: Tue, 21 Jan 2003 22:44:53 +0100 Organization: home Subject: [Dx4win] How to Link DX4WIN with MMTTY Hello to all, How to Link DX4WIN with MMTTY is on Guy ON4AOI his webpage DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm It's work great on my PC it's work on 1 PC with WindowsXP Pro and DX4Win 5.3 and MMTTY 1.63 ,I installed the Multi-port serial adapter from MixW and there simulate 2 serial ports ! It's available here : http://www.mixw.net/related.htm The RX and TX works great but when I double click on a call like in the PSK window de call did not appeared in de log window ! and the F1 key for calling CQ start not for TX. TNX Guy it's a great job !! 73 de ON6OM Rene --- There is a bug in 5.03 or Windows XP which does not allow a double click in the PSK window to appear properly in the QSO window. John, K2CIB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] ICOM 765 !
If you added up the cost of the components of a Pro II, I doubt that would come out anywhere near the selling price either... But then, is the value of the Mona Lisa calculated in terms of a little canvas and some oil paint? Happy New year to all... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gregory Brown Sent: December 31, 2002 6:05 PM To: dx4win@mailman.qth.net Subject: RE: [Dx4win] ICOM 765 ! Lou, I don't have any experience with the interface you are considering, but I did have (apparently) the same problem with my CT-17 and faced the same quandry. My choice was to assume that the MAX232 chip in the CT-17 was fried (the IC is about the most fragile component in there) and decided to try replacing it. Using de-soldering braid and a 15 watt iron, it is quite easy to remove the old chip. Since I didn't want to risk heat damage to the new the new chip, I installed a chip socket instead, then simply plugged in the new chip. The CT-17 now works like a charm, and the job was much easier than I thought it would be. The replacement for the MAX232CPE chip cost $2.19, and the 16 pin solder-tail sockets sell for 10 cents each (but you have to by 10!) The real eye opener was when I priced all the components in the CT-17, and the total came out around 10 bucks! But then you wouldn't have that nice ICOM stencil on the box! Replacing the chip isn't like building your own interface, but it sure was easy and satisfying. Got my parts from Jameco Electronics. They do have a web-presence and a very nice catalog. Good luck! Greg KT0K ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Need more Comm ports
I'm using a Lava multiport card... Works fine under Win98 and XP... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Warheit Sent: December 21, 2002 8:06 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] Need more Comm ports I am in need of a few more comm ports to connect to my HF rig, antenna rotor controller and another device using DX4WIN. I need some advice on what board I need to purchase to do this. TIA, Dave This message is certified virus free with Norton Antivirus 2003. My website: http://www.nauticom.net/www/dwarheit --- StripMime Report -- processed MIME parts --- multipart/related multipart/alternative text/plain (text body -- kept) text/html image/unknown The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. Please post in Plain-Text only.--- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] IC775DSP/CT-17 vs DX4WIN
I'm not so sure that is a good idea Jim. I discovered this problem when going back through my log and found a few QSO's on bizarre frequencies... Sometimes the bobble strikes just as you log the QSO... Tranceive really should be off with DX4WIN... I used CT also... So I just put a reminder in the batch file that started CT... Something like... @ECHO Is the tranceive mode set? @PAUSE It's not a problem with newer rigs... But some of the older ones are a little difficult to switch transceive on and off... It really would be nice if DX4WIN worked like CT, YPLog and Writelog... On my wish list... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: December 10, 2002 8:17 PM To: Pete Smith; dx4win@mailman.qth.net Subject: RE: [Dx4win] IC775DSP/CT-17 vs DX4WIN At 03:46 PM 12/7/2002 -0500, Pete Smith wrote: The 775 doesn't have the infamous transceive switch, does it? Either in hardware or software? Once upon a time this switch had to be set one way or the other to communicate with the computer. sorry, don't remember any more details, because I've never owned an Icom HF rig. My IC-756 Pro works with the radio transceive setting in either position. However, when it's on, the band/mode display in DX4WIN can bobble while tuning the dial (temporarily go to strange bands/modes). When transceive is off, it's rock solid. However, I must remember to turn it back on when running CT, which expects the radio to babble frequency when the VFO knob is turned. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Frequency entry in DX4WIN
It's not in Preferences... It's in QS0 - Contest menu on the QSO data window... Not the most intuitive place to put it... But it works fine... Only slight inconvenience is if you add a QSO in manual mode... It inserts a $$ instead of the frequency (which is not available) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William Liporace - NA2NA Sent: December 8, 2002 10:43 AM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Frequency entry in DX4WIN OK maybe I am missing something still (more than likely) I have a Yaesu FT-1000D configured to work with DX4WIN. That works fine. I have tried $$ and $$ in the Note for this QSO window with out any success. Is there something else that I need to do? I do not see any settings in the preferences... Is there any other place to do it? I work a few people this morning to try it... TNX Will - Original Message - From: Wendell Wyly W5FL [EMAIL PROTECTED] To: William Liporace - NA2NA [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Sunday, December 08, 2002 2:03 AM Subject: RE: [Dx4win] Frequency entry in DX4WIN You only put the $$ in the program one time and then it automatically records the exact frequency of each qso after that. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of William Liporace - NA2NA Sent: Saturday, December 07, 2002 4:31 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Frequency entry in DX4WIN It seems crazy that you have to put the $$ in every QSO... How do you import it from a contest? There really should be an easier way ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] IC775DSP/CT-17 vs DX4WIN
I believe 46 is correct... Though you can change it... Handy if you have 2 775s ;-) I'd use 9600... But that should not be an issue... 1200 should work fine... Make sure you have the right COM port connected... You are using the correct cable... Not a null modem cable or something... You have power to the CT17... The Com port isn't disabled in the BIOS if it's on the main-board. Try another cable... Another COM port... Try another program such as YPLog which has a very easy to configure interface... And a free demo download. You should also get a copy of C-IV commander available for download elsewhere... If it still doesn't work... Could be anything... Time to scope the TTL interface and see if it's working... Good luck... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: December 7, 2002 2:40 PM To: [EMAIL PROTECTED]; dx4win@mailman.qth.net Subject: Re: [Dx4win] IC775DSP/CT-17 vs DX4WIN Ben- I used to have that same setup and it worked fine. Try seeing the radio and program to 9600 baud and I have some vague memory the radio address is 4C or 5C, not 46. Andy K5VM - Original Message - From: [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Saturday, December 07, 2002 11:36 AM Subject: [Dx4win] IC775DSP/CT-17 vs DX4WIN I have problem to get my IC775 and CT17 work with DX4WIN. It always say Radio timeout. I have done the proper setup in DX4WIN. -address for IC775 is 46 -Baudrate is 1200 -The baudrate in my computer is also set to 1200. I have tested with several computers, I have also reload DX4WIN several times. No luck!! I use Dx4WIN ver. 5.03 Why didn=B4t it work ?? Please help !!! 73s de Ben SM3DXC ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] CW keyboard question
Paul mentioned in the past it's on the list... In the mean time, Barry, you can find a rs232 Y connector and you'll be in business... And save a port too. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Barry Sent: December 3, 2002 4:41 PM To: dx4win@mailman.qth.net Subject: [Dx4win] CW keyboard question After using DX4WIN for almost 10 years, I just got the urge to try the CW keyboard for the first time. To my chagrin, I find there is no choice of serial ports - it only uses the same COM port as the radio. This is the case in my version 4.07. Do the newer versions of DX4WIN support COM port selection for CW keying? Tnx, Barry -- Barry Kutner, W2UP Internet: [EMAIL PROTECTED] Newtown, PA Frankford Radio Club ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] RE: Dx4win digest, Vol 1 #275 - 1 msg
Well... First things first... Don't even TRY to transmit unless you can receive... Make sure that your sound card is truly compatible with the SoundBlaster... I had a sound card at one point that worked fine for music and such... But couldn't copy PSK31... It would copy the occasional few letters, but mostly gibberish. I was so disappointed, I wondered why anybody bothered with PSK31... Anyway, switching the sound card solved the problem. That being said, I would expect that if the card wasn't compatible, MMTY wouldn't work either... If you have no power out when you key the transmitter, you obviously have no audio going to the transmitter. Do you hear the psk31 being sent? If so... Something is amiss in your connections... Message: 1 From: [EMAIL PROTECTED] Date: Sat, 2 Nov 2002 13:40:18 EST To: dx4win@mailman.qth.net Subject: [Dx4win] help with psk31 hi the name here is phil and i am trying to get psk31 to work.i have a kenwood 570 and a rigblaster and the last rev. of dx4win. with a dell 1.7 gh. comp. i have rtty working ( mmtty program ) but i can only copy junk and i can key the transmitter but i have no power output ? i am at a loss now i have done justabout every thing that i can think of, but still no working psk31. i am hoping some one will take the time to walk me thru the settings. thanks for any and all help . phil w3gt ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win End of Dx4win Digest
