Re: FW: OU812

[Greg Thomas]

On 4/28/06, Melameth, Daniel D. <[EMAIL PROTECTED]> wrote:

> > > > > > > > > > Thought I'd have I little fun with my 3.9 CD set
> > > > > > > > > > before I have some fun with my 3.9 CD set...
> > > > > > > > > >
> > > > > > > > > > http://208.139.201.73/39cdpolo.jpg
> > > > > > > > > >
> > > > > > > > > > And for all you "pansies" that find it necessary to
> > > > > > > > > > publicly whine about broken tabs, mine are fine ;) .
> > > > > > > > >
> > > > > > > > > Am I missing some relevance to Van Halen?
> > > > > > > >
> > > > > > > > No--you're spot on.  I put the first silly thing that
> > > > > > > > came to my head in the subject... ;)
> > > > > > >
> > > > > > > You reminded me that I haven't listened to that album in
> > > > > > > a long while. So I'm listening to it now.
> > > > > > >
> > > > > > > If I had a credit card, a 3.9 CD would be "Mine all mine"
> > > > > > > too.  ; )
> > > > > >
> > > > > > Hehe.  Thanks for the laugh--hope I did the same... ;)
> > > > >
> > > > > Yeah, you gave me a laugh.


Wow, I guess we had to be there.

Greg

priv sep in syslogd

[Brian]

I am in the process of making syslogd more protocol independent (IPv4 & IPv6). 
I am just about ready to add a priviledged fuction for getnameinfo, but what I
do not understand is why the the DNS lookups are priviledged separated.  I do
understand the security piece talked about in the getnameinfo(3) man page.  And
I have read through the CVS comments.

I understand the socketpair must_read's and must_write's.  But before I
finalize anything, I want to make sure I understand the security assumptions. 
Can someone fill me in?

I am using getaddrinfo and binding two sockets: udp and udp6 per inet6.  I have
modified cvthname to handle IPv4 and IPv6 (passing in a struct sockaddr_storage
and using inet_pton), save for the hostname look up since I need to call a
priviledged function for getnameinfo instead of gethostbyaddr (which is only
IPv4).

I still have some additional IPv4 only stuff that I need to clean up.  And I
need to clean up the code I did write.  And I need to verify that the current
pipe stuff can be removed as well since the code looks to only use the
socketpairs.  Finally, I need to test it.

Thanks,

brian
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Re: openbsd on root-server?

[Christian Pedaschus]

for the archives:
http://strato.alpha-labs.net/strato-freebsd-15.pdf

me crawls back under his rock...

greets


Christian Pedaschus wrote:

>Hi list,
>
>i'm trying since a few hours to get 3.8 on a (linux-based) root-server,
>without success. I googled some tutorials (for ex.
>http://wiki.bsd-crew.de/index.php?title=Strato-Rootserver_mit_NetBSD&redirect=no)
>but they don't seem to work (i tried it with my own bootdisk and the
>mentioned precompiled one). All i get is a blocked ssh-login. I see the
>pxe-loader come up, but then there is silence...
>After writing the floppy-image to the disk i used fdisk to see what
>happened and i get something like this:
>
>--
>[EMAIL PROTECTED]:~# fdisk /dev/sda
>This disk has both DOS and BSD magic.
>Give the 'b' command to go to BSD mode.
>
>The number of cylinders for this disk is set to 20023.
>There is nothing wrong with that, but this is larger than 1024,
>and could in certain setups cause problems with:
>1) software that runs at boot time (e.g., old versions of LILO)
>2) booting and partitioning software from other OSs
>   (e.g., DOS FDISK, OS/2 FDISK)
>
>Command (m for help): b
>There is no *BSD partition on /dev/sda.
>
>Command (m for help): p
>
>Disk /dev/sda: 164.6 GB, 16469620 bytes
>255 heads, 63 sectors/track, 20023 cylinders
>Units = cylinders of 16065 * 512 = 8225280 bytes
>
>This doesn't look like a partition table
>Probably you selected the wrong device.
>
>   Device Boot  Start End  Blocks   Id  System
>/dev/sda1   ?   15357  229722  1721888152+  e8  Unknown
>Partition 1 does not end on cylinder boundary.
>/dev/sda2   ?   1   1   01  FAT12
>Partition 2 does not end on cylinder boundary.
>/dev/sda3  115307  12580384312115+   0  Empty
>Partition 3 does not end on cylinder boundary.
>/dev/sda4   ?   1   1   0   3f  Unknown
>Partition 4 does not end on cylinder boundary.
>
>Partition table entries are not in disk order
>--
>
>(it's the same view without using 'b')
>Other tutorials mention they created a local disk-image using an
>identical disk and then upped the whole dd image. But i don't have an
>identical disk and this way seems very brute to me.
>
>Anybody got a better way or a tutorial i missed?
>
>Thanks for your time,
>Chris

FW: OU812

[Melameth, Daniel D.]

> > > > > > > > > > Thought I'd have I little fun with my 3.9 CD set
> > > > > > > > > > before I have some fun with my 3.9 CD set...
> > > > > > > > > > 
> > > > > > > > > > http://208.139.201.73/39cdpolo.jpg
> > > > > > > > > > 
> > > > > > > > > > And for all you "pansies" that find it necessary to
> > > > > > > > > > publicly whine about broken tabs, mine are fine ;) .
> > > > > > > > > 
> > > > > > > > > Am I missing some relevance to Van Halen?
> > > > > > > > 
> > > > > > > > No--you're spot on.  I put the first silly thing that
> > > > > > > > came to my head in the subject... ;)
> > > > > > > 
> > > > > > > You reminded me that I haven't listened to that album in
> > > > > > > a long while. So I'm listening to it now.
> > > > > > > 
> > > > > > > If I had a credit card, a 3.9 CD would be "Mine all mine"
> > > > > > > too.  ; )
> > > > > > 
> > > > > > Hehe.  Thanks for the laugh--hope I did the same... ;)
> > > > > 
> > > > > Yeah, you gave me a laugh. I went to Google to see if there
> > > > > was some greater relevance to OU812 that I was not aware of
> > > > > and stumbled on the Wikipedia entry for the album. With song
> > > > > names like these I had a laugh at the relevance:
> > > > > 
> > > > > "Mine all mine":  It's my CD! Get your own!
> > > > > "When It's Love": We love Puffy.
> > > > > "A.F.U. (Naturally Wired)":   Through OpenSSH of course!
> > > > > "Source of Infection":Not with OpenBSD.   ; )
> > > > > "Feels So Good":  Unwrapping the package.
> > > > > "Finish What Ya Started": Something Theo would say.
> > > > > 
> > > > > ; )
> > > > 
> > > > Lol!  This thread should be posted back to the list ;) .
> > > 
> > > Haha. Yeah.  ; )
> > 
> > So are you going to do it or am I ;) ?
> 
> Theo might tell us to shut up and hack!
> 
> ; )

OU812

[Melameth, Daniel D.]

Thought I'd have I little fun with my 3.9 CD set before I have some fun
with my 3.9 CD set...

http://208.139.201.73/39cdpolo.jpg

And for all you "pansies" that find it necessary to publicly whine about
broken tabs, mine are fine ;) .

openbsd on root-server?

[Christian Pedaschus]

Hi list,

i'm trying since a few hours to get 3.8 on a (linux-based) root-server,
without success. I googled some tutorials (for ex.
http://wiki.bsd-crew.de/index.php?title=Strato-Rootserver_mit_NetBSD&redirect=no)
but they don't seem to work (i tried it with my own bootdisk and the
mentioned precompiled one). All i get is a blocked ssh-login. I see the
pxe-loader come up, but then there is silence...
After writing the floppy-image to the disk i used fdisk to see what
happened and i get something like this:

--
[EMAIL PROTECTED]:~# fdisk /dev/sda
This disk has both DOS and BSD magic.
Give the 'b' command to go to BSD mode.

The number of cylinders for this disk is set to 20023.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): b
There is no *BSD partition on /dev/sda.

Command (m for help): p

Disk /dev/sda: 164.6 GB, 16469620 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

This doesn't look like a partition table
Probably you selected the wrong device.

   Device Boot  Start End  Blocks   Id  System
/dev/sda1   ?   15357  229722  1721888152+  e8  Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2   ?   1   1   01  FAT12
Partition 2 does not end on cylinder boundary.
/dev/sda3  115307  12580384312115+   0  Empty
Partition 3 does not end on cylinder boundary.
/dev/sda4   ?   1   1   0   3f  Unknown
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
--

(it's the same view without using 'b')
Other tutorials mention they created a local disk-image using an
identical disk and then upped the whole dd image. But i don't have an
identical disk and this way seems very brute to me.

Anybody got a better way or a tutorial i missed?

Thanks for your time,
Chris

Re: cyrus, sasl and /etc/passwd

[Josh Archambault]

> How do I configure cyrus imapd to retrieve mail from normal unix mailboxes
> and validate against the unix password? I have been trying to find info on
> it and I can't find anything that works with v2.2.12 from 3.8 ports. Can
> someone point me in the right direction?

The Cyrus lists are probably a more appropriate forum for this question,
but this should get you started:

a) Cyrus cannot use normal UNIX mailboxes.  It has its own internal (and
quite scalable) format.

b) The Cyrus SASL2 port compiles and works quite well.  Cyrus IMAP can be
configured to use sasl to authenticate, and sasl can be configured to
authenticate against the OpenBSD password file (via the "getpwent" method).

-J

Re: cyrus, sasl and /etc/passwd

[Josh Archambault]

> How do I configure cyrus imapd to retrieve mail from normal unix mailboxes
> and validate against the unix password? I have been trying to find info on
> it and I can't find anything that works with v2.2.12 from 3.8 ports. Can
> someone point me in the right direction?

This is probably a little more appropriate question for the Cyrus lists,
but:

a) Cyrus cannot use normal UNIX mailboxes.  It has its own internal (and
quite scalable) format.

b) The Cyrus SASL2 port compiles and works quite well.  Cyrus IMAP can be
configured to use sasl to authenticate, and sasl can be configured to
authenticate against the OpenBSD password file (via the "getpwent" method).

-J

cyrus, sasl and /etc/passwd

[John Brahy]

How do I configure cyrus imapd to retrieve mail from normal unix mailboxes
and validate against the unix password? I have been trying to find info on
it and I can't find anything that works with v2.2.12 from 3.8 ports. Can
someone point me in the right direction?

Thanks,

John

Re: /emul size

[Ted Unangst]

On 4/28/06, Diana Eichert <[EMAIL PROTECTED]> wrote:

then what is compat_osf1?


something one doesn't talk about in polite company. :)

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-33a2b16e14-5657224eb2

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-950bb4c39b-2f1565b82d

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-2f504a7b4a-81b8e237f6

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-a70523fc11-186689352d

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-bef6a8bdf8-5889785ca1

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-9a284e6cc2-c3fde813f0

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Question on some hardware devices(chrysalis-its and packet engine gigE card)

[kyle]

Hi everyone. Just want to know if anyone had gotten either of these
devices to work:

#Chrysalis-ITS Trusted High Performance Engine
unknown vendor 0xcafe product 0x0001 (class crypto subclass
network/computing, rev 0x01) at pci0 dev 16 function 0 not configured

#Packet Engines Inc. GNIC-II PCI Gigabit Ethernet 1000baseSX
"Packet Engines PMC/GNIC2" rev 0x01 at pci0 dev 15 function 0 not configured

The gigE card I saw some notes about people using it and also recall
seeing some comments and diffs in cvs. The Chrysalis-ITS Im having
trouble finding any info on in general.

So, if you any info on the above please let me(and the list) know.

Thanks!

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-4db53b152e-ec54bf32c4

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-c0ae5fe381-a3582444fd

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-237997c8c9-b68376d4de

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-0bbe3e4c39-f34bd436fc

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-0fe1d6dd47-44c82103ea

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-b66e338765-6fc4f5c2c8

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-d2bf36752a-a2bcd02ede

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Eero Lammi has invited you to open a Google mail account

[Eero Lammi]

---

Eero Lammi has invited you to open a free Gmail account.

To accept this invitation and register for your account, visit
http://mail.google.com/mail/a-42cb8816d4-d7de840ac6-48b26b992d

Once you create your account, Eero Lammi will be notified with
your new email address so you can stay in touch with Gmail!

If you haven't already heard about Gmail, it's a new search-based webmail
service that offers:

- Over 2,500 megabytes (two gigabytes) of free storage
- Built-in Google search that instantly finds any message you want
- Automatic arrangement of messages and related replies into
 "conversations"
- Powerful spam protection using innovative Google technology
- No large, annoying ads--just small text ads and related pages that are
 relevant to the content of your messages

To learn more about Gmail before registering, visit:
http://mail.google.com/mail/help/benefits.html

And, to see how easy it can be to switch to a new email service, check
out our new switch guide: http://mail.google.com/mail/help/switch/

We're still working every day to improve Gmail, so we might ask for your
comments and suggestions periodically.  We hope you'll like Gmail.  We
do.  And, it's only going to get better.

Thanks,

The Gmail Team

(If clicking the URLs in this message does not work, copy and paste them
into the address bar of your browser).

Re: /emul size

[Diana Eichert]

On Fri, 28 Apr 2006, Ted Unangst wrote:
SNIP
> you're thinking of compat_svr4.

Oh

then what is compat_osf1?

I remember trying to get an ancient version of netscape running on an
OpenBSD Alpha system, hm, lessee 5 or 6 years ago.  I don't think I
ever got it working.

diana

Re: /emul size

[Ted Unangst]

On 4/28/06, Diana Eichert <[EMAIL PROTECTED]> wrote:

On Fri, 28 Apr 2006, Bob Beck wrote:
SNIP
>   Having said that on my linux-emul-infected-machine that currently holds
> about 100MB of redhat package goo - you might have more, so YMMV
>
>   -Bob

Goo?

No muck and mire?


you're thinking of compat_svr4.

Re: /emul size

[Diana Eichert]

On Fri, 28 Apr 2006, Bob Beck wrote:
SNIP
>   Having said that on my linux-emul-infected-machine that currently holds
> about 100MB of redhat package goo - you might have more, so YMMV
>
>   -Bob

Goo?

No muck and mire?

diana

Re: /emul size

[Ted Unangst]

On 4/28/06, Gustavo Rios <[EMAIL PROTECTED]> wrote:

I am considering enableing linux emulation in my openbsd box.
For this i will have to install the linux emul port in my system. But
i do not know how much space should put aside for /emul directory.


/emul/linux is a symlink.  put aside 1 inode.

redhat packages get installed under /usr/local.
gzip -l redhat_base-8.0p8.tgz
compressed  uncompressed  ratio  uncompressed_name
 30439159  95813120  68.2%  redhat_base-8.0p8.tar

Re: /emul size

[Bob Beck]

Caveat emptor - hope it's not a high security application.

With that out of the way, I never put in in /emul - I put it in
/usr/local/emul and I 
ln -s /usr/local/emul /emul 

Having said that on my linux-emul-infected-machine that currently holds
about 100MB of redhat package goo - you might have more, so YMMV

-Bob

* Gustavo Rios <[EMAIL PROTECTED]> [2006-04-28 14:43]:
> I am considering enableing linux emulation in my openbsd box.
> For this i will have to install the linux emul port in my system. But
> i do not know how much space should put aside for /emul directory.
> 
> Thanks in advance.
> 

-- 
| | | The ASCII Fork Campaign
 \|/   against gratuitous use of threads.
  |

/emul size

[Gustavo Rios]

I am considering enableing linux emulation in my openbsd box.
For this i will have to install the linux emul port in my system. But
i do not know how much space should put aside for /emul directory.

Thanks in advance.

Re: X on Compact Flash

[joerch]

On Fri, Apr 28, 2006 at 11:51:44PM +1000, Steve wrote:
> >You can't easily buy 16M CF devices anymore.  512M will probably do 
> >the job.
> >If starting a new project, start with 3.9, as things got a lot bigger due
> >to the addition of debugging symbols in libraries.  Might have to 
> >leave out
> >the compXX file set, not much desire to compile from source on flash 
> >anyway.
> >Nick.

I never tried release (8), maybe i will install my soekris box again
and do some testing. I have an installation on a laptop with source,
i patched everything and builded everything on it. And i have the soekris
box, where i mount src and obj with nfs. Then i did only a make install,
worked without problems. Next time i will try everything without 
installing compXX.tgz on the cf card, with mounting the dir with the 
stuff i need for compiling ... make ...

If someone thinks that is a good idea or that it is total waste of
time, please let me know. I am a little paranoid about this things,
i always think i missed some special or really important points.

> No didnt miss it. Just wanted to keep the costs as low as possible. I 
> was guessing however that I was going to require at least a couple
> of gigs of flash.

Hmm 512 mb or 1 gb are not this expensive, in Germany, between 30 and
60 euro, sorry i do not know much this is in dollars. Maybe you can
get them much cheaper on ebay.

By the way i think getting an adapter from ide to cf is a very good
thing, if you want to do installs on cf cards more then once or twice
a year. ;) I tried it with usb cardreaders and it took about 2 minutes
to know that they are crap. I had some hours in trying, screaming and
trying it again to get it on my cf card, pc hardware is very ... lets
say ... special in some cases. With the adapter it is like installing
on a harddisk, very clean, fast and stable.

Just some thoughts.

-- 
gruesse 
joerg "joerch" buechner
--
"Kaum macht mans richtig, 
schon funktionierts!"
(busack thomas)
--

Re: no content when sending mail to a program via .forward

[John Brahy]

yeah, that was it. I should have thought of that. Too many beers and jager
shots last night at a punk rock show.



On 4/28/06, Darrin Chandler <[EMAIL PROTECTED]> wrote:
>
> Last time I messed with that I think everything was on stdin...
>
> --
> Darrin Chandler|  Phoenix BSD Users Group
> [EMAIL PROTECTED]   |  http://bsd.phoenix.az.us/
> http://www.stilyagin.com/  |

no content when sending mail to a program via .forward

[John Brahy]

I'm writing a program that will take email based searches, .forward seems
like the simplest way to accomplish this.
The problem that I am having is that I don't know how to access the content
of the email. I tried argv and env but neither gave me a clue on how to
access the actual message. I know there has to be a way to do this since
this is the way procmail works. Can anyone give me an idea of where do look
for the message data?

the variables I found were:

CLIENT_ADDRESS=
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/usr/local/bin
SHELL=/bin/ksh
USER=search
HOME=/home/search
[EMAIL PROTECTED]
MAIL_CONFIG=/etc/postfix
CLIENT_PROTOCOL=ESMTP
CLIENT_HELO=domain.com
DOMAIN=domain.com
LOCAL=search
[EMAIL PROTECTED]
LOGNAME=search

Re: OpenBGPd max-prefix

[Sylvain Coutant]

> well, your 2 plus the 5 from your other customers plus the
> $max-prefix

The 5 is the $max_prefix. We have just only one BGP customer. Total is 7. I 
should never have announced more than 7 routes in any case.


--
Sylvain COUTANT

ADVISEO
http://www.adviseo.fr/
http://www.open-sp.fr/

Tel: +33 (0)1 30 42 72 95
Gsm: +33 (0)6 30 79 26 33

Re: X on Compact Flash

[Steve]

Nick Holland wrote:

Steve wrote:

Hi all,

I am currently using 3.8 release with a basic X install and rdesktop 
as a thin term

for a windows terminal server.

I would like to migrate this to compact flash or similar.

Flashdist and flashboot dont seem to be able to accomodate this.


as they were designed for tiny, non-X setups, I'd be surprised if they 
did.



Am I missing something or are there alternatives.


You seem to be missing the obvious: Install OpenBSD normally on a
sufficient sized flash media.  What is wrong with this solution?

You can't easily buy 16M CF devices anymore.  512M will probably do 
the job.

If starting a new project, start with 3.9, as things got a lot bigger due
to the addition of debugging symbols in libraries.  Might have to 
leave out
the compXX file set, not much desire to compile from source on flash 
anyway.


Nick.



Thanks all,

No didnt miss it. Just wanted to keep the costs as low as possible. I 
was guessing however that I was going to require at least a couple

of gigs of flash.

Thanks heaps for the feedback.

Steve

Re: Port collection missing...

[Shane J Pearson]

On 2006.04.29, at 2:04 AM, S t i n g r a y wrote:


Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.


You have chosen to use 3.7 just days before it will be unsupported  
due to the 3.9 release date coming up (1st May).


You might be better off re-installing 3.8 or waiting for 3.9.

Re: OpenBGPd max-prefix

[Henning Brauer]

* Sylvain Coutant <[EMAIL PROTECTED]> [2006-04-28 18:23]:
> Hi,
> 
> One funny thing today. One of our customer did announce us too many routes. 
> The max-prefix has been reached (was 5) and the session closed.
> 
> A few seconds later I saw several peering sessions go down in the logs but 
> did not thought about any links between events. Having had exchange with 
> network managers on the other sides, they told me I reached the max-prefix on 
> their side (was at 10 and I usually announce 2 routes + 5 from my customer).
> 
> That means I did announce up to 10 routes at some point. I announce 2 for us 
> and should have 5 more from my customer. That's 7 routes max. How could I 
> have reached 10 announced prefixes ? What I imagine is that for a few seconds 
> I did announce all the routes I received from my customer before the 
> max-prefix did cut the session ? Would this be possible that max-prefix is 
> not synchronously checked ?

well, your 2 plus the 5 from your other customers plus the 
$max-prefix from your misbehaving customer probably exceeded 10. even 
if the $max-prefix ones were removed shortly after the session was 
closed they were of course announced & revoked to your peers as well.

-- 
BS Web Services, http://www.bsws.de/
OpenBSD-based Webhosting, Mail Services, Managed Servers, ...
Unix is very simple, but it takes a genius to understand the simplicity.
(Dennis Ritchie)

Re: Port collection missing...

[Reid Nichol]

As well, since this is your first install, I'll point out afterboot(8).

Also, just FYI, 3.9 is released Monday.


--- Peter Blair <[EMAIL PROTECTED]> wrote:
> ftp://ftp.openbsd.org/pub/OpenBSD/3.7/ports.tar.gz
> 
> On 4/28/06, S t i n g r a y <[EMAIL PROTECTED]> wrote:
> > Well i just installed my First OpenBSD BOX :) feels
> > good !!! but to install packages i cannot find ports
> > collection in /usr how can i get them ? i am using 3.7
> > version.
> >
> > regards
> >
> >
> > *:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
> > Tired of spam?  Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Re: Port collection missing...

[Peter Blair]

But perhaps you're confusing ports & packages:

http://www.openbsd.org/faq/faq15.html#PkgMgmt

Packages are pre-compiled.  Ports creates packages from source.  You
don't need the ports tree to install packages.

-Pete

On 4/28/06, Peter Blair <[EMAIL PROTECTED]> wrote:

ftp://ftp.openbsd.org/pub/OpenBSD/3.7/ports.tar.gz

On 4/28/06, S t i n g r a y <[EMAIL PROTECTED]> wrote:
> Well i just installed my First OpenBSD BOX :) feels
> good !!! but to install packages i cannot find ports
> collection in /usr how can i get them ? i am using 3.7
> version.
>
> regards
>
>
> *:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com

Re: Port collection missing...

[Piotr Jedryczek]

On 4/28/06, S t i n g r a y <[EMAIL PROTECTED]> wrote:

Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.

regards

Get it from:
ftp://ftp.openbsd.org/pub/OpenBSD/3.7/ports.tar.gz
and unpack in /usr

Piotr Jjdryczek

Re: Port collection missing...

[Spruell, Darren-Perot]

From: [EMAIL PROTECTED] 
> Well i just installed my First OpenBSD BOX :) feels
> good !!! but to install packages i cannot find ports
> collection in /usr how can i get them ? i am using 3.7
> version.

Read:
http://www.openbsd.org/ports.html

It's even an FAQ. Read:
http://www.openbsd.org/faq/faq15.html

DS

Re: Port collection missing...

[Pedro Timóteo]

S t i n g r a y wrote:

Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.

  

Look for ports.tar.gz on the 3rd CD.

Re: Port collection missing...

[Peter Blair]

ftp://ftp.openbsd.org/pub/OpenBSD/3.7/ports.tar.gz

On 4/28/06, S t i n g r a y <[EMAIL PROTECTED]> wrote:

Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.

regards


*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Re: Port collection missing...

[Gustavo A. Baratto]

http://openbsd.org/faq/faq15.html#PortsFetch

S t i n g r a y wrote:
> Well i just installed my First OpenBSD BOX :) feels
> good !!! but to install packages i cannot find ports
> collection in /usr how can i get them ? i am using 3.7
> version.
> 
> regards
> 
> 
> *:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 

Port collection missing...

[S t i n g r a y]

Well i just installed my First OpenBSD BOX :) feels
good !!! but to install packages i cannot find ports
collection in /usr how can i get them ? i am using 3.7
version.

regards


*:$., 88,.$:*(((*$ Stingray *:$., 88,.$:*((*$
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

OpenBGPd max-prefix

[Sylvain Coutant]

Hi,

One funny thing today. One of our customer did announce us too many routes. The 
max-prefix has been reached (was 5) and the session closed.

A few seconds later I saw several peering sessions go down in the logs but did 
not thought about any links between events. Having had exchange with network 
managers on the other sides, they told me I reached the max-prefix on their 
side (was at 10 and I usually announce 2 routes + 5 from my customer).

That means I did announce up to 10 routes at some point. I announce 2 for us 
and should have 5 more from my customer. That's 7 routes max. How could I have 
reached 10 announced prefixes ? What I imagine is that for a few seconds I did 
announce all the routes I received from my customer before the max-prefix did 
cut the session ? Would this be possible that max-prefix is not synchronously 
checked ?


BR,

--
Sylvain COUTANT

ADVISEO
http://www.adviseo.fr/
http://www.open-sp.fr/

Re: old libs removal

[Marc Espie]

On Fri, Apr 28, 2006 at 09:51:57AM -0600, Bob Beck wrote:
>   If you do this - any apps which are linked against the older versions 
> will
> likely stop working. 
> 
>   the reason "upgrade" leaves them lying around is so that your 
> applications which
> were built using an older version of the OS will continue to get the correct 
> share library.
> 
>   My suggestion is don't do this - if what you really want is a clean 
> system, 
> consider doing "install" instead of upgrade and reinstalling your 
> applications from
> versions compiled on the version of OpenBSD you are installing
> 
>   -Bob
> 

These days, if you only have packages installed, and they're recent, they
should register every shared library they need.

We could have a fairly simple tool which would remove those old libs, after
validating no other package leaves them...

Re: Sun 220R, cdrom problem

[Shane J Pearson]

For the archives (until Sun moves things around again)...

On 2006.02.12, at 7:50 PM, Brad wrote:


I just thought I should point out the fact that some
Sun systems need firmware updates. The 220R specifically
needed an update on the system that was used for the
initial OpenBSD/sparc64 port, I do not know the details
as to why that was necessary.

Unfortunately with the change in licensing of Solaris and
the way Sun supports Solaris and their systems you can no
longer download these updates from the SunSolve FTP site
without a support contract. I do not know if its possible
to find these updates elsewhere.


It seems that the patches for these machines are still publically  
available.

I patched a U60 recently and found this:

ftp://patches.sun.com/patchroot/all_unsigned/


Since it is a large list of patches, here are links to the latest  
versions available at that ftp for the OpenBSD supported machines:


Blade 100/150   79
ftp://patches.sun.com/patchroot/all_unsigned/79-10.zip
ftp://patches.sun.com/patchroot/all_unsigned/79-10.README

Enterprise 220R 106455  
ftp://patches.sun.com/patchroot/all_unsigned/106455-11.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/106455-11.README

Enterprise 250  106503  
ftp://patches.sun.com/patchroot/all_unsigned/106503-09.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/106503-09.README

Enterprise 420R 109082  
ftp://patches.sun.com/patchroot/all_unsigned/109082-05.zip
ftp://patches.sun.com/patchroot/all_unsigned/109082-05.README

Enterprise 450  106122  
ftp://patches.sun.com/patchroot/all_unsigned/106122-11.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/106122-11.README

Enterprise 3x00/4x00/5x00/6x00  103346  
ftp://patches.sun.com/patchroot/all_unsigned/103346-30.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/103346-30.README

Netra T1 200111991  
ftp://patches.sun.com/patchroot/all_unsigned/111991-07.zip
ftp://patches.sun.com/patchroot/all_unsigned/111991-07.README

Netra X1111952  
ftp://patches.sun.com/patchroot/all_unsigned/111952-03.zip
ftp://patches.sun.com/patchroot/all_unsigned/111952-03.README

Ultra 1 104881  
ftp://patches.sun.com/patchroot/all_unsigned/104881-09.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/104881-09.README

Ultra 1E104288  
ftp://patches.sun.com/patchroot/all_unsigned/104288-09.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/104288-09.README

Ultra 2 104169  
ftp://patches.sun.com/patchroot/all_unsigned/104169-08.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/104169-08.README

Ultra 5/10  106121  
ftp://patches.sun.com/patchroot/all_unsigned/106121-18.zip
ftp://patches.sun.com/patchroot/all_unsigned/106121-18.README

Ultra 30105930  
ftp://patches.sun.com/patchroot/all_unsigned/105930-06.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/105930-06.README

Ultra 60106455  
ftp://patches.sun.com/patchroot/all_unsigned/106455-11.tar.Z
ftp://patches.sun.com/patchroot/all_unsigned/106455-11.README

Ultra 80109082  
ftp://patches.sun.com/patchroot/all_unsigned/109082-05.zip
ftp://patches.sun.com/patchroot/all_unsigned/109082-05.README


Shane J Pearson

Re: old libs removal

[Bob Beck]

If you do this - any apps which are linked against the older versions 
will
likely stop working. 

the reason "upgrade" leaves them lying around is so that your 
applications which
were built using an older version of the OS will continue to get the correct 
share library.

My suggestion is don't do this - if what you really want is a clean 
system, 
consider doing "install" instead of upgrade and reinstalling your applications 
from
versions compiled on the version of OpenBSD you are installing

-Bob


* Alexander Belikov <[EMAIL PROTECTED]> [2006-04-28 01:53]:
> Hi all!
> 
> I'm folloving -current for a 6 month. As time goes by i've got a lot
> of old\new libraries:
> 
> for ex. /usr/X11R6/lib
> ...
> libXrender.so.3.1
> libXrender.so.4.0
> libXrender.so.4.1
> ...
> libX11.so.8.1
> libX11.so.9.0
> ...
> 
> ...and so on.
> 
> Is there a way to remove all old binaries? It's not a problem for me
> to write a short perl script to remove them. Is there any implemented
> solution?
> 
> -- 
> Best regards,
>  Alexander
> 

-- 
| | | The ASCII Fork Campaign
 \|/   against gratuitous use of threads.
  |

quad de, flakiness with 3.9

[David Terrell]

Since upgrading to 3.9 I've been having a problem with flakiness from
my older PCI quad ethernet card.  de3 here is a dhcp interface (crappy
SBC DSL), de2 and de1 are internal (wired and wireless).

the symptoms of failure are that de3 will stop sending packets.
tcpdump doesn't show outgoing transmissions, dhclient complains
"out of buffer space", and even without any active transmissions
ifconfig shows OACTIVE in the interface flags.

(the machine is up at the moment so I don't have that ifconfig handy, 
sorry).

One other thing I notice is that when I do ask it to do autonegotiate
it floods the network with requests, but a hardcode to 100baseTX doesn't
work (I don't exactly have a managed switch on the other end) and 
10baseT complains that there is no carrier in ifconfig status and 
dhclient won't run.

Any ideas?  Simply bad hardware?  This was working fine with 3.8 and
even a 3.9 snapshot from two months ago before the CDs arrived monday
and I did the upgrade.

de3: flags=8863 mtu 1500
lladdr xx:xx:xx:xx:xx:xx
groups: egress
media: Ethernet autoselect (100baseTX)
status: active
inet6 fe80::...%de3 prefixlen 64 scopeid 0x4
inet nn.nn.nn.nn netmask 0xff00 broadcast nn.nn.nn.255

OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D processor ("AuthenticAMD" 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 804823040 (785960K)
avail mem = 726990848 (709952K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1a) BIOS, date 04/12/00, BIOS32 rev. 0 @ 0xfb380
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf/0xb808
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 3 7 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc/0x8800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C598 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x23
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 57241MB, 117231408 sectors
wd1 at pciide0 channel 0 drive 1: 
wd1: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: 
wd2: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x11: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"VIA VT82C596 Power" rev 0x30 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 17 function 0 "DEC 21052 PCI-PCI" rev 0x02
pci2 at ppb1 bus 2
de0 at pci2 dev 4 function 0 "DEC 21140" rev 0x12: irq 10
de0: ZNYX ZX34X  pass 1.2 address xx:xx:xx:xx:xx:xx
de1 at pci2 dev 5 function 0 "DEC 21140" rev 0x12: irq 12
de1: ZNYX ZX34X  pass 1.2 address xx:xx:xx:xx:xx:xx
de2 at pci2 dev 6 function 0 "DEC 21140" rev 0x12: irq 7
de2: ZNYX ZX34X  pass 1.2 address xx:xx:xx:xx:xx:xx
de3 at pci2 dev 7 function 0 "DEC 21140" rev 0x12: irq 3
de3: ZNYX ZX34X  pass 1.2 address xx:xx:xx:xx:xx:xx
vga1 at pci0 dev 18 function 0 "NVIDIA Riva TNT" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahc0 at pci0 dev 19 function 0 "Adaptec AHA-29160 U160" rev 0x02: irq 7
scsibus1 at ahc0: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
isapnp0 at isa0 port 0x279: read port 0x203
isapnp0: No current device for tag, card 1
sb1 at isapnp0 "Creative SB AWE64  PnP, CTL0045, , Audio" port 
0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.16
midi1 at sb1: 
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: 
joy0 at isapnp0 "Creative SB AWE64  PnP, CTL7002, PNPB02F, Game" port 0x200/8
"Creative SB AWE64  PnP, CTL0022, , WaveTable" at isapnp0 port 0x620/4 not 
configured
biomask ebd5 netmask ffdd ttymask ffdf
pctr: user-level cycl

Re: OpenBSD's LIBC C99 missing %a string format support

[Giancarlo Razzolini]

Otto Moerbeek wrote:
> On Fri, 28 Apr 2006, Gustavo Rios wrote:
>
>> I could suggest one to avoid ANSI C functions as much as possible.
>> Write his/her own ones. Why? The motivation has been stated by you:
>> portability concerns.
>
> Only if you believe the code you produce is better than the result of
> the effort of hundreds of people over a period of more than 20 years.
>
> People inventing the wheel over and over is nothing more than a waste
> of effort and a endless source of bugs.  Effort that instead could
> have been spent on providing more C99 features to our libc.
>
>   -Otto
>

Programming in ANSI is the best way to get portability. I agree with
Otto. Invent the wheel over and over is a waste that could be put to
some good use. The only place that i believe that invent the wheel is
good is when you are learning. After that point, using ANSI functions,
is the best way to program correctly, securely and portable.

My 2 cents,
--
Giancarlo Razzolini
Linux User 172199
Moleque Sem Conteudo Numero #002
Slackware Current
OpenBSD Stable
Snike Tecnologia em Informatica
4386 2A6F FFD4 4D5F 5842  6EA0 7ABE BBAB 9C0E 6B85

[demime 1.01d removed an attachment of type application/pgp-signature which had 
a name of signature.asc]

Re: advantages/disadvantages of kernel pppoe(4) vs userland pppoe(8)?

[Jonathan Thornburg]

In message

I wrote

I'm about to setup up ADSL at home for the first time, using the
following network topology:

[[...]]

The firewall/router/nat box is (will be when I get this setup)
an old 486 laptop with 2 pcmcia ethernet cards, running 3.9-stable.
(Yes, I've ordered a CD; until it arrives I'm using 3.8-stable on
various machines.)

I already have the (external) DSL modem, and from talking to other
Unix-savvy customers of my ISP (arcor.de), their setup is that the
DSL modem talks pppoe to me (in this case to my firewall/router/nat
box).  From looking at the FAQ section 6, it seems I have two basic
options available doing this in OpenBSD: pppoe(4) in the kernal, and
pppoe(8) in userland.  My question is, what are the relative
advantages/disadvantages of these?


I'd like to thank everyone who has replied.  So far almost everyone
has said that the in-kernel pppoe(4) works fine (indeed many find it
easier to configure/operate than the userland pppoe(8)), and that given
the old hardware I'll need the in-kernel pppoe(4) to get the performance
I want.

I have a followup request-for-advice:  Given the old hardware (more
info and full dmesg below), what sorts of network cards should I be
looking for for the firewall/router/nat machine for it to (hopefully)
keep up with the ADSL bandwidth (supposedly 6Mbit/sec downlink, I
think 0.5Mbit/sec uplink)?

That is,  http://www.openbsd.org/i386.html#hardware  lists lots of
pcmcia ethernet adaptors, but apart from the warning

Please be aware that many NE2000 adapters fail or perform very poorly.
We do not recommend using them, but your mileage may vary.

I don't know which of them are likely to be particularly efficient
or inefficient.  The main traffic is likely to be http, scp, and maybe
streaming audio in the future.


Hardware details:

My firewall/router/nat machine is a Toshiba Satellite T2130CT laptop,
with 32MB memory, a 486dx4 cpu, a new-in-2001 10GB disk, and 2 pcmcia
slots which I'll use for the 2 network cards.  (At the moment one pcmcia
slot is the  ne3  card in the dmesg below, and the other slot is empty.
If the  ne3  card + one new card will suffice for 6M bit/sec, that's
great; otherwise I'll need to buy two new cards.)

Here's a full dmesg (yes, I know 3.5-stable is obselete; I promise not
to hook it to the ADSL line before installing at least 3.8-stable):

OpenBSD 3.5 (GENERIC) #4: Wed Jun  9 11:39:09 CDT 2004
[EMAIL 
PROTECTED]:/usr/binpatch/work-binpatch-3.5/src/sys/arch/i386/compile/GENERIC
cpu0: Intel 486DX4 ("GenuineIntel" 486-class)
cpu0: FPU,V86
real mem  = 7344 (32556K)
avail mem = 24854528 (24272K)
using 432 buffers containing 1769472 bytes (1728K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c4) BIOS, date 08/25/95
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 2:36 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xe/0x1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
vga0 at isa0 port 0x3b0/48 iomem 0xa/131072
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd/65536
pcic0 controller 0:  has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
ne3 at pcmcia0 function 0 "Ethernet, Adapter, 2.0" port 0x340/32: irq 3
ne3: address 00:e0:98:34:68:15
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask 4040 netmask 4048 ttymask 52ca
pctr: no performance counters in CPU
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

thanks, ciao,

--
-- Jonathan Thornburg <[EMAIL PROTECTED]>
   Max-Planck-Institut fuer Gravitationsphysik (Albert-Einstein-Institut),
   Golm, Germany, "Old Europe" http://www.aei.mpg.de/~jthorn/home.html
   "Washing one's hands of the conflict between the powerful and the
powerless means to side with the powerful, not to be neutral."
  -- quote by Freire / poster by Oxfam

Re: problem with LSI Fibre Channel MPT AMD64 OpenBSD 3.9-current

[Diana Eichert]

On Thu, 27 Apr 2006, Aaron Glenn wrote:

> On 4/25/06, Diana Eichert <[EMAIL PROTECTED]> wrote:
> > On Fri, 21 Apr 2006, Marco Peereboom wrote:
> >
> > > So I really meant SC->LC.
> >
> > Marco
> >
> > Did anyone ever pony up a cable for you?
> >
> > diana
>
> He's got two five meter 62.5 5m multimode SC to LC jumpers being
> FedEx'ed over tomorrow.
>
> aaron.glenn

Cool, 'cause I'd arranged for one of my vendor's field engineers to get
him a cable also.

diana

Re: xdm crashes on boot with 'timeout_set: already queued'

[Miod Vallat]

I recently reinstalled a laptop (Compaq Evo N610c) with the latest
snapshot. Ever since, the system occasionally crashes when starting
xdm. I set up serial console to another machine and started rebooting.
The problem appears to be related to the timeout changes, the panic
message is :

panic: timeout_set: already queued


This is not the latest snapshot. This problem has been fixed since.

Miod

xdm crashes on boot with 'timeout_set: already queued'

[Paul de Weerd]

I recently reinstalled a laptop (Compaq Evo N610c) with the latest
snapshot. Ever since, the system occasionally crashes when starting
xdm. I set up serial console to another machine and started rebooting.
The problem appears to be related to the timeout changes, the panic
message is :

panic: timeout_set: already queued

I've had similar crashes on another machine (with the same snapshot)
but I have not confirmed this other machine panics with the same
message. This is the Tecra 8000, as found on i386-laptop.html, dmesg
at http://www.weirdnet.nl/openbsd/dmesg/whopper

Please find attached the serial output from this boot, including ps
and trace output. There seems to be some sort of issue with the PCMCIA
slot in this machine, the xl0 below doesn't work and another card
(rl0) has other issues.

Anybody seen this before ?

Cheers,

Paul 'WEiRD' de Weerd


>> OpenBSD/i386 BOOT 2.10
boot> 
booting hd0a:bsd.mp: 5025256+872712 [52+259056+240118]=0x619e80
entry point at 0x200120

[ using 499600 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9-current (GENERIC.MP) #671: Thu Apr 20 00:47:35 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel" 686-class) 
1.80 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 536244224 (523676K)
avail mem = 48080 (470920K)
using 4278 buffers containing 26914816 bytes (26284K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 02/20/03, BIOS32 rev. 0 @ 0xf
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 75%
apm0: AC on, battery charge high, charging
apm0: flags 130102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf08c0/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf50a0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801CAM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc/0x1 0xd/0x1800
cpu0 at mainbus0: (uniprocessor)
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz ("GenuineIntel" 686-class) 
1.80 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
"AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 4 function 0 not configured
cbb0 at pci2 dev 6 function 0 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 
11
cbb1 at pci2 dev 6 function 1 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 
11
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VM" rev 0x42, i82562: irq 10, 
address 00:08:02:93:49:da
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ohci0 at pci2 dev 14 function 0 "NEC USB" rev 0x41: irq 10, version 1.0, legacy 
support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 14 function 1 "NEC USB" rev 0x41: irq 10, version 1.0, legacy 
support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 14 function 2 "NEC USB" rev 0x02: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 11

Re: old libs removal

[Matthias Kilian]

On Fri, Apr 28, 2006 at 10:39:24AM +0300, Alexander Belikov wrote:
> Is there a way to remove all old binaries? It's not a problem for me
> to write a short perl script to remove them. Is there any implemented
> solution?

You can use the scripts used by the validation steps mentioned in
release(8) to get a list of files that don't belong to a release.
For example, to check the base system (excluding X11):

# cd /usr/src/distrib/sets
# DESTDIR=/ sh checkflist > ~/foo
# vi ~/foo

At this point, *carefully* review the list (which is a diff(1)
output) and remove everything you do *not* want to delete. After
this, you can cleanup with xargs(1) and rm(1).

For X11, the procedure is similar, but slightly different. Read the
makefile and the scripts involved.

And take into account that there may be installed packages (typically
under /usr/local) that are linked against older shared libraries,
so you will have to update those packages (and any additional local
software). Better do this *before* deleting anything.

Ciao,
Kili

Re: X on Compact Flash

[Mike Wolman]

Hi,

I have found the following works well, i have not run X from CF but 
suspect it will work - provided the flash disk has enough space to fit X

on it.

--

For a 256Mb flash card

a - /   - 60m
d - /var- 11m
e - /usr- rest

---

Once installed reboot, install any required pkgs (rsync being one) and 
edit fstab:


Change from:
/dev/wd0e /usr ffs rw,nodev 1 2

To:
/dev/wd0e /usr ffs ro,nodev 1 2


---

Setting up /mfs/var

Unless apache is required remove /var/www


Create:
/mfs/var

Rsync accross log files:

/usr/local/bin/rsync -vorpug /var/ /mfs/var

---

Setting up /mfs/dev

mkdir /mfs/dev
cp /dev/MAKEDEV /mfs/dev
cd /mfs/dev
./MAKEDEV all


---

Create ram disk for /var (47mb), /tmp (15 mb) and /dev (500K) by adding 
mfs mounts to fstab:

(note mb sizes are approx):

swap /var mfs rw,-s=102400,nodev,noatime,noexec,nosuid 0 0
swap /dev mfs rw,-s=2048,-i=128,nosuid 0 0
swap /tmp mfs rw,-s=32768,nodev,noatime,noexec,nosuid 0 0

Note for dev the inode number is increased to handle the number of device nodes.

So complete fstab:

/dev/wd0a / ffs ro 1 1
/dev/wd0e /usr ffs ro,nodev 1 2
#/dev/wd0d /var ffs rw,nodev,nosuid 1 2
swap /var mfs rw,-s=102400,nodev,noatime,noexec,nosuid 0 0
swap /dev mfs rw,-s=2048,-i=128,nosuid 0 0
swap /tmp mfs rw,-s=32768,nodev,noatime,noexec,nosuid 0 0

---

Now need to setup automatic population of mfs mounts on reboot in /etc/rc

comment out line number 202:
mount -uw /

under rm -f /fastboot (about line 203 on 3.9) add:

# Copy dev files before anything else
cp -Rp /mfs/dev/* /dev

comment out line 261 - this is required as /var is mounted twice 
otherwise:

mount /var >/dev/null 2>&1

and add below it:

printf "copying files to mfs ..."
/usr/local/bin/rsync -orpug /mfs/var/ /var
echo " done."






On Fri, 28 Apr 2006, Steve wrote:


Hi all,

I am currently using 3.8 release with a basic X install and rdesktop as a 
thin term

for a windows terminal server.

I would like to migrate this to compact flash or similar.

Flashdist and flashboot dont seem to be able to accomodate this.

Am I missing something or are there alternatives.

Thanks,

Steve

Re: X on Compact Flash

[Björn Andersson]

> Hi all,
>
> I am currently using 3.8 release with a basic X install and rdesktop as
> a thin term
> for a windows terminal server.
>
> I would like to migrate this to compact flash or similar.
>
> Flashdist and flashboot dont seem to be able to accomodate this.
>
> Am I missing something or are there alternatives.
>
> Thanks,
>
> Steve
>
Make a standard installation on the flash, then look at how the flashdist
handles /var and /tmp and implement that in your installation.

Mount / ro.

And it will live 'forever'.

// Bjvrn

Re: Why advocate Old daemon book?

[Peter N. M. Hansteen]

""=?ISO-8859-1?Q?Ari_Const=E2ncio?="" <[EMAIL PROTECTED]> writes:

> How about "Mastering FreeBSD and OpenBSD Security" from O'Reilly?

I bought it and enjoyed it for the most part.  If what you are looking
for is a huge HOWTO full of recipes, you would need to look elsewhere.
What it does contain is quite a bit of useful background information
about how a number of security relevant things are done by default in a
sanely configured BSD system.  

A lot of it is good, but I remember being a bit disappointed about some
of the networking related bits, which I remember as being relatively
shallow compared to some rather in-depth parts about other matters such
as about file systems.

-- 
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://www.blug.linux.no/rfc1149/ http://www.datadok.no/ http://www.nuug.no/
"First, we kill all the spammers" The Usenet Bard, "Twice-forwarded tales"
20:11:56 delilah spamd[26905]: 146.151.48.74: disconnected after 36099 seconds.

Re: X on Compact Flash

[Nick Holland]

Steve wrote:

Hi all,

I am currently using 3.8 release with a basic X install and rdesktop as 
a thin term

for a windows terminal server.

I would like to migrate this to compact flash or similar.

Flashdist and flashboot dont seem to be able to accomodate this.


as they were designed for tiny, non-X setups, I'd be surprised if they did.


Am I missing something or are there alternatives.


You seem to be missing the obvious: Install OpenBSD normally on a
sufficient sized flash media.  What is wrong with this solution?

You can't easily buy 16M CF devices anymore.  512M will probably do the job.
If starting a new project, start with 3.9, as things got a lot bigger due
to the addition of debugging symbols in libraries.  Might have to leave out
the compXX file set, not much desire to compile from source on flash anyway.

Nick.

Re: X on Compact Flash

[Stuart Henderson]

On 2006/04/28 19:02, Steve wrote:
> I am currently using 3.8 release with a basic X install and rdesktop as a 
> thin term
> for a windows terminal server.
> 
> I would like to migrate this to compact flash or similar.
> 
> Flashdist and flashboot dont seem to be able to accomodate this.
> 
> Am I missing something or are there alternatives.

How about just using a standard install? (just don't create
a swap partition, maybe mount noatime, but you don't need to
change much)... flash large enough to accommodate this is
pretty cheap now.

X on Compact Flash

[Steve]

Hi all,

I am currently using 3.8 release with a basic X install and rdesktop as 
a thin term

for a windows terminal server.

I would like to migrate this to compact flash or similar.

Flashdist and flashboot dont seem to be able to accomodate this.

Am I missing something or are there alternatives.

Thanks,

Steve

Re: RAID5 and Smart Array 6i Controller

[Matteo Mancini]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

edgarz wrote:
> Hello community!
> 
> I want to ask about a RAID5 enlargement on Smart Array 6i Controller. Is
> it possible to add a new harddisk and rebuild array without data loss?
> 
> Thanks
> 
> 

Yes,
u have to  reboot with hp install cd , add the new hd to existing volume
in the array configuration (ACU) page

Bye

MAtteo
iD8DBQFEUdH0/TjXD9LUVswRAk5UAKCJsLbf8mqmo8lgKqWbVBE5siWM9QCfb1vo
pQFyRu3HtAOB5oL9XqMtVms=
=3HyS
-END PGP SIGNATURE-

Re: isakmpd: ESP + AH tunnel in OpenBSD

[Goh Choon Lye]

Hi,

 I want to setup following IPSec tunneling mode
[IPHDR][IPoptions][AH][ESP][IPHDR2][IPoptions][TCP][data]

given in
http://anoncvs.openbsd.lt/cgi-bin/viewcvs.cgi/www/faq/faq13.html?rev=1.6

Following is my network setup (or in attachment)


Net-A: 192.3.20.0/24
Net-B: 192.3.40.0/24
Net-C: 195.85.10.32/27 (private network)

open1: 192.3.20.238
gate:  192.3.20.1 and 192.3.40.1
open15:192.3.40.55 (Interface to B), 195.85.10.33 (interface to C)
open3: 195.85.10.34

Setup IPSec tunnel mode:
[IPHDR][IPoptions][AH][ESP][IPHDR2][IPoptions][TCP][data]

I failed to achieve following
1. setup IPSec ESP and AH tunnel between open1 and open15
2. open1 able to access open15 and IP packets are IPSec ESP and AH tunnel
3. open1 able to access private network (195.85.10.32) and IP packets are
IPSec tunnel


I run "isakmpd -d -DA=99" in open1 and open15.

>From open1, I ping open3 and ping command doesn't print reply message.
Ethereal shows IP packet 174 bytes
open1 to open3: [IP | ESP 116 bytes ]
open3 to open1: [IP | AH | ESP 116 bytes]

>From open3, I ping open 1 and no reply packet captured by Ethereal
open3 to open1: [IP | AH | ESP 116 bytes]


1. Can this IPSec tunnel mode can be setup and valid ?
2. Why IP packet format from open1 to open3, and open3 to open1 is different?
3. Eventually I will connect open1 to GPRS network and setup IPSec in open1
and open15,
   so i have to achieve open1 to open15, and open1 to private network setup.
Can this be done ?


isampkd.conf and isakmpd.policy for open1:
KeyNote-Version: 2
Comment: This policy accepts ESP SAs from a remote that uses the right
password
$OpenBSD: policy,v 1.4 2000/01/26 15:20:40 niklas Exp $
$EOM: policy,v 1.5 2000/01/26 14:03:07 niklas Exp $
Authorizer: "POLICY"
Licensees: "passphrase:mekmitasdigoat"
Conditions: app_domain == "IPsec policy" -> "true";

#   $OpenBSD: singlehost-west.conf,v 1.8 2000/05/03 13:37:33 niklas Exp $
#   $EOM: singlehost-west.conf,v 1.8 2000/05/03 13:25:25 niklas Exp $

# A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.

[Phase 1]
192.3.40.55 =   ISAKMP-open15

[Phase 2]
Connections=IPsec-open15

[ISAKMP-open15]
Phase=  1
Transport=  udp
Address=192.3.40.55
Configuration=  Default-main-mode
Authentication= mekmitasdigoat

[IPsec-open15]
Phase=  2
ISAKMP-peer=ISAKMP-open15
Configuration=  Default-quick-mode
Local-ID=   Net-open1
Remote-ID=  Net-open15


[Net-open1]
ID-type=IPV4_ADDR_SUBNET
Network=192.3.20.238
Netmask=255.255.255.255

[Net-open15]
ID-type=IPV4_ADDR_SUBNET
Network=195.85.10.32
Netmask=255.255.255.224

[Default-main-mode]
DOI=IPSEC
EXCHANGE_TYPE=  ID_PROT
Transforms= 3DES-MD5

[3DES-MD5]
ENCRYPTION_ALGORITHM=   3DES_CBC
HASH_ALGORITHM= MD5
AUTHENTICATION_METHOD=  PRE_SHARED
GROUP_DESCRIPTION=  MODP_1024
Life=   LIFE_3600_SECS

[DES-MD5]
ENCRYPTION_ALGORITHM=   DES_CBC
HASH_ALGORITHM= MD5
AUTHENTICATION_METHOD=  PRE_SHARED
GROUP_DESCRIPTION=  MODP_1024
Life=   LIFE_3600_SECS

[Default-quick-mode]
DOI=IPSEC
EXCHANGE_TYPE=  QUICK_MODE
Suites= QM-ESP-3DES-MD5-AH-MD5-SUITE

# Quick mode protection suites
##
# 3DES
[QM-ESP-3DES-MD5-AH-MD5-SUITE]
Protocols=  QM-ESP-3DES-MD5,QM-AH-MD5

# Quick mode protocols
#
# 3DES
[QM-ESP-3DES-MD5]
PROTOCOL_ID=IPSEC_ESP
Transforms= QM-ESP-3DES-MD5-XF

# AH
[QM-AH-MD5]
PROTOCOL_ID=IPSEC_AH
Transforms= QM-AH-MD5-XF

# Quick mode transforms
#
# 3DES
[QM-ESP-3DES-MD5-XF]
TRANSFORM_ID=   3DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM=   HMAC_MD5
GROUP_DESCRIPTION=  MODP_1024
Life=   LIFE_3600_SECS

# AH Transform
[QM-AH-MD5-XF]
TRANSFORM_ID=   MD5
ENCAPSULATION_MODE= TRANSPORT
AUTHENTICATION_ALGORITHM=   HMAC_MD5
GROUP_DESCRIPTION=  MODP_1024
Life=   LIFE_3600_SECS

[LIFE_3600_SECS]
LIFE_TYPE=  SECONDS
LIFE_DURATION=  3600,1800:7200


/
isampkd.conf and isakmpd.policy for open15:
KeyNote-Version: 2
Comment: This policy accepts ESP SAs from a remote that uses the right
password
$OpenBSD: policy,v 1.4 2000/01/26 15:20:40 niklas Exp $
$EOM: policy,v 1.5 2000/01/26 14:03:07 niklas Exp $
Authorizer: "POLICY"
Licensees: "passphrase:mekmitasdigoat"
Conditions: app_domain == "IPsec policy" -> "true";

#   $OpenBSD: singlehost-west.conf,v 1.8 2000/05/03 13:37:33 niklas Exp $
#   $EOM: singlehost-west.conf,v 1.8 2000/05/03 13:25:25 niklas Exp $

# A configu

merge{slave,master} in base ?

[Antoine Jacoutot]

Hi...

Some time ago there was a discussion about the eventual integration of either
mergemaster, mergeslave or an other /etc updating solution in the base system.

Is this idea dropped or are you still thinking about it.

Thanks!

-- 
Antoine

HP DL385 sensors

[edgarz]

My dmesg

OpenBSD 3.9-current (GENERIC.MP) #796: Tue Apr 25 02:43:20 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1073311744 (1048156K)
avail mem = 908374016 (887084K)
using 22937 buffers containing 107540480 bytes (105020K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (HP   PROLIANT)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 265, 1804.35 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 
64b/line 16-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: AMD Opteron(tm) Processor 265, 1804.09 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 
64b/line 16-way L2 cache

cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 1 (application processor)
cpu2: AMD Opteron(tm) Processor 265, 1804.09 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 
64b/line 16-way L2 cache

cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Opteron(tm) Processor 265, 1804.09 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 
64b/line 16-way L2 cache

cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 32 is type ISA
ioapic0 at mainbus0 apid 4 pa 0xfec0, version 11, 24 pins
ioapic1 at mainbus0 apid 5 pa 0xfec1, version 11, 4 pins
ioapic2 at mainbus0 apid 6 pa 0xfec2, version 11, 4 pins
ioapic3 at mainbus0 apid 7 pa 0xfdc0, version 11, 4 pins
ioapic4 at mainbus0 apid 8 pa 0xfdc1, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 3 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 1
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 4 int 19 
(irq 5), version 1.0, legacy support

usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 4 int 19 
(irq 5), version 1.0, legacy support

usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"Compaq iLO" rev 0x01 at pci1 dev 2 function 0 not configured
"Compaq iLO" rev 0x01 at pci1 dev 2 function 2 not configured
vga1 at pci1 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 4 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility

atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
amdpm0 at pci0 dev 4 function 3 "AMD 8111 Power" rev 0x05: rng active
iic0 at amdpm0
ppb1 at pci0 dev 7 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 
5 int 0 (irq 7)

ciss0: 1 LD, HW rev 1, FW 2.58/2.58
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0:  SCSI0 0/direct 
fixed
sd0: 138919MB, 138919 cyl, 64 head, 32 sec, 512 bytes/sec, 284506560 sec 
total

aapic0 at pci0 dev 7 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
ppb2 at pci0 dev 8 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 3
bge0 at pci3 dev 6 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 
(0x2100): apic 6 int 0 (irq 7), address 00:17:08:50:b8:34

brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 6 f

J2ME Wireless Toolkit 1.0.4

[Alexander Farber]

Just for the archives: Sun's J2ME Wireless Toolkit version 1.0.4
(the self-extracting j2me_wireless_toolkit-1_0_4_02-linux-i386.bin )
works ok on OpenBSD -current when using the jdk-1.4.2 port
(with the jdk1.3.1-linux it has GUI problems and jdk-1.5.0 can't build).

You have however to make a link WTK104/wtklib/Linux -> OpenBSD
or you'll get a java.lang.ExceptionInInitializerError.

After that you can run WTK104/bin/ktoolbar to build and emulate midlets

HP 385DL sensors

[edgarz]

Hi!

Anybody have any sensors working on this HP server?
I got this
# sysctl hw.sensors
#

Edgars.

Re: old libs removal

[Antoine Jacoutot]

Selon Alexander Belikov <[EMAIL PROTECTED]>:
> Is there a way to remove all old binaries? It's not a problem for me
> to write a short perl script to remove them. Is there any implemented
> solution?

See the "cleanupoldsysfiles" script here :

http://www.xs4all.nl/~hanb/software/OpenBSD-binary-upgrade/

While you're at it check out the other scripts.
OpenBSD-binary-upgrade + mergeslave + cleanupoldsysfiles is a _fantastic_ combo!

-- 
Antoine

Re: OpenBSD's LIBC C99 missing %a string format support

[Gustavo Rios]

Dear gentleman Moerbeek,

thank you very much for your clarifications. I will seriously take
them in account the next time i write a line of code.

All the best.

On 4/28/06, Otto Moerbeek <[EMAIL PROTECTED]> wrote:
>
> On Fri, 28 Apr 2006, Gustavo Rios wrote:
>
> > I could suggest one to avoid ANSI C functions as much as possible.
> > Write his/her own ones. Why? The motivation has been stated by you:
> > portability concerns.
>
> Only if you believe the code you produce is better than the result of
> the effort of hundreds of people over a period of more than 20 years.
>
> People inventing the wheel over and over is nothing more than a waste
> of effort and a endless source of bugs.  Effort that instead could
> have been spent on providing more C99 features to our libc.
>
> -Otto
>
> >
> > I could do it ...
> >
> > On 4/28/06, Leonardo Rodrigues <[EMAIL PROTECTED]> wrote:
> > > Hello everyone!
> > >
> > > So, I've been trying to build some apps here on my OpenBSD box, but
> > > the lack of OpenBSD's compliance of some C99 standards is stopping me
> > > from achieving my builds...
> > > The only problem so far is the lack of support for the %a string
> > > format used in functions snprintf and sscanf.
> > >
> > > I've tried to circumvent this problem by using "libtrio"
> > > (http://daniel.haxx.se/projects/trio/), a library that claims to
> > > reimplement those functions above, but I couldn't get it to work right
> > > (it fails right on 'make test').
> > >
> > > Of course I could just dig myself into the code and try to implement
> > > this standard... but I'm a mediocre programmer...
> > >
> > > Suggestions on how to solve this problem of mine (workarounds, etc) are 
> > > welcome!
> > >
> > > --
> > > An OpenBSD user... and that's all you need to know =)

Re: OpenBSD's LIBC C99 missing %a string format support

[Otto Moerbeek]

On Fri, 28 Apr 2006, Gustavo Rios wrote:

> I could suggest one to avoid ANSI C functions as much as possible.
> Write his/her own ones. Why? The motivation has been stated by you:
> portability concerns.

Only if you believe the code you produce is better than the result of
the effort of hundreds of people over a period of more than 20 years. 

People inventing the wheel over and over is nothing more than a waste
of effort and a endless source of bugs.  Effort that instead could
have been spent on providing more C99 features to our libc. 

-Otto

> 
> I could do it ...
> 
> On 4/28/06, Leonardo Rodrigues <[EMAIL PROTECTED]> wrote:
> > Hello everyone!
> >
> > So, I've been trying to build some apps here on my OpenBSD box, but
> > the lack of OpenBSD's compliance of some C99 standards is stopping me
> > from achieving my builds...
> > The only problem so far is the lack of support for the %a string
> > format used in functions snprintf and sscanf.
> >
> > I've tried to circumvent this problem by using "libtrio"
> > (http://daniel.haxx.se/projects/trio/), a library that claims to
> > reimplement those functions above, but I couldn't get it to work right
> > (it fails right on 'make test').
> >
> > Of course I could just dig myself into the code and try to implement
> > this standard... but I'm a mediocre programmer...
> >
> > Suggestions on how to solve this problem of mine (workarounds, etc) are 
> > welcome!
> >
> > --
> > An OpenBSD user... and that's all you need to know =)

Re: OpenBSD's LIBC C99 missing %a string format support

[Gustavo Rios]

I could suggest one to avoid ANSI C functions as much as possible.
Write his/her own ones. Why? The motivation has been stated by you:
portability concerns.

I could do it ...

On 4/28/06, Leonardo Rodrigues <[EMAIL PROTECTED]> wrote:
> Hello everyone!
>
> So, I've been trying to build some apps here on my OpenBSD box, but
> the lack of OpenBSD's compliance of some C99 standards is stopping me
> from achieving my builds...
> The only problem so far is the lack of support for the %a string
> format used in functions snprintf and sscanf.
>
> I've tried to circumvent this problem by using "libtrio"
> (http://daniel.haxx.se/projects/trio/), a library that claims to
> reimplement those functions above, but I couldn't get it to work right
> (it fails right on 'make test').
>
> Of course I could just dig myself into the code and try to implement
> this standard... but I'm a mediocre programmer...
>
> Suggestions on how to solve this problem of mine (workarounds, etc) are 
> welcome!
>
> --
> An OpenBSD user... and that's all you need to know =)

old libs removal

[Alexander Belikov]

Hi all!

I'm folloving -current for a 6 month. As time goes by i've got a lot
of old\new libraries:

for ex. /usr/X11R6/lib
...
libXrender.so.3.1
libXrender.so.4.0
libXrender.so.4.1
...
libX11.so.8.1
libX11.so.9.0
...

...and so on.

Is there a way to remove all old binaries? It's not a problem for me
to write a short perl script to remove them. Is there any implemented
solution?

-- 
Best regards,
 Alexander