Re: How to Use WAP Gateway For Bulk SMS

[Alvaro Cornejo]

Hi

Sms throughput depends on what your carrier/smsc allows you to send.

In smpp smsc it is usually limited by what you contract with your carrier
and can go from 1 sms/sec to 10 or more sms/sec.

with modems (smsc-at), you are limited by the protocol itself, available
radio channels, signal quality, etc. Here usually you get something like 1
sms each 5-10 seconds. I usually do my calculations with 480 sms/hr.

In both cases, you can use multiple links in order to increase your total
throughput. On the first you need to negotiate it with your provider; in
the second, you need to purchase more modems and sims with the correct plan.

Regards

Alvaro


|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
  Visitenos en www.perusms.com

On Mon, Nov 3, 2014 at 6:32 AM, Aditya Khanna  wrote:

> *Hello Everyone,*
>
> I'm new with Kannel SMS Gateway.
>
> I have configured Bearerbox, SMSBox and SQLBox for sending bulk sms
> through my HTTP Application. But problem is that the speed of sending sms
> is too low.
>
> So my first question is that how to increase the speed of sending sms.
> Second one is what is the importance of WAPBox in Bulk SMS.
>
> Please any one suggest me regarding above questions.
>
> Your reply will be appreciated.
>
>
>
> Thanks,
> Aditya Khanna
>
>
>
>

How to Use WAP Gateway For Bulk SMS

[Aditya Khanna]

*Hello Everyone,*

I'm new with Kannel SMS Gateway.

I have configured Bearerbox, SMSBox and SQLBox for sending bulk sms through
my HTTP Application. But problem is that the speed of sending sms is too
low.

So my first question is that how to increase the speed of sending sms.
Second one is what is the importance of WAPBox in Bulk SMS.

Please any one suggest me regarding above questions.

Your reply will be appreciated.



Thanks,
Aditya Khanna

How to use WAP Gateway with SMS Gateway

[Aditya Khanna]

Hi Group,

I'm newbie in Kannel SMS Gateway. I'm configuring both boxes WAPBox and
SMSBox in Kannel configuration. But I have some confusion in working of
WAPBox in Kannel.

What is main purpose of WAPBox with SMSBox?

Please suggest me that how to use WAP Gateway in SMS Gateway and what will
be the impact on SMS Gateway.


Aditya Khanna

Re: WAP Gateway

[Stipe Tolj]

Am 18.09.2013 12:34, schrieb Stuart Eoghan:


We are looking to deploy a new WAP Gateway in our network, to replace
the existing one which is falling over regularly.


Hi Stuart,

please let me answer you questions inlined below:


I have a few questions:

Is the WAP Kannel gateway in use commercially in many networks?


the normal Kannel WAP gateway, means the WAP 1.2.1 parts are 
"officially" not running in any live MNO networks. We have informations 
that some Latin American and Asian networks have it as a kind of 
"fallback" for their main commercial vendors.


Beside the normal Kannel, there are a numerous set of Kannel-CG 
installation at MNOs and MVNOs. The commercial Kanenl-CG (carier-grade) 
WAP gateway that we provide is a full featured WAP 1.2.1 and WAP 2.0 
gateway, including a full featured RADIUS server and on-the-fly byte 
accounting server.


We are proud that Kannel-CG has been substituting several major 
commercial vendor installations, including deployments from Huawei, 
Ericsson, Openwave and Acision - by outperforming all of these vendors 
in terms of maximum concurrency performance.



Does it support all of or most of the last WAP protocol?


The open source Kannel does support WAP 1.2.1. Though, there are some 
"flaws" in the WAP 1.2.1 stack, especially when used under high 
concurrency load. This was the main reason we have re-written the WAP 
1.2.1 stack with more effective data structures and releasing this in 
combination with WAP 2.0 (HTTP proxy capability) support into the 
commercial Kannel-CG product.



Would it be capable of approximately 70 Transactions per second WAP Pulls?


Should, that's not a huge amount of concurrent traffic. I don't have any 
hard figures for the open source Kannel WAP part, the Kannel-CG 
installations handle from 800 to 2400 TPS concurrently, depending on 
hardware and architecture layout.



What Hardware would be recommended to support that level of throughput?


The 70 TPS should be working out-of-the-box for any normal production 
class machine of today. Having a nice amount of RAM is always welcome, 
but not necessary.



Thanks for any help that can be given.


you're absolutely welcome. Please let me know if I can assist you any 
further, either with the open source Kannel parts for the WAP 1.2.1 or 
even with the commercial Kannel-CG WAP Gateway.


Best Regards,
Stipe

--
---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

WAP Gateway

[Stuart Eoghan]

Hi,

We are looking to deploy a new WAP Gateway in our network, to replace the 
existing one which is falling over regularly.

I have a few questions:

Is the WAP Kannel gateway in use commercially in many networks?
Does it support all of or most of the last WAP protocol?
Would it be capable of approximately 70 Transactions per second WAP Pulls?
What Hardware would be recommended to support that level of throughput?

Thanks for any help that can be given.

Regards,

Eoghan Stuart



Unless otherwise stated, this email has been sent from Fujitsu (Ireland) 
Limited, "Fujitsu". 

This email is only for the use of its intended recipient.  Its contents are 
subject to a duty of confidence and may be privileged.  Fujitsu does not 
guarantee that this email has not been intercepted and amended or that it is 
virus-free.

Fujitsu (Ireland) Limited, registered in Ireland No 473572, registered office 
Airside Business Park, Swords Co Dublin.

Re: The wap gateway

[Stipe Tolj]

Am 04.06.2011 21:09, schrieb mattias:

So the gateway are only for old dialup on mobile phones
Not for modern gprs?


the normal Kannel WAP gateway provides the WAP 1.2.1 stack (including WAP Push), 
which uses UDP as IP bearer and can be utilized via CSD or GPRS. In fact the 
underlying radio transmission technology is not specified in the specs.


For WAP 2.0 you use "more or less" plain HTTP, with some addition of WTCP which 
uses a "radio-efficient" TCP implementation.


Essentially today, the WAP gateway takes 2 roles:

a) transcode from WAP 1 phones the WTP/WSP layers to TCP for the target HTTP 
servers.


b) provisioning of RADIUS values in HTTP headers towards the target HTTP, i.e. 
for registered VASP or the MMSC of the operator to receive the MSISDN of the user.


The normal Kannel can handle both, where the Kannel-CG includes a full WAP 2.0 
stack and a more complex RADIUS AAA framework. Both are relevant for mobile 
network operators, and don't make any sense for VASPs, as long as they are not 
in control of the GGSN of the network, "or" the MNO provides a dedicated APN via 
it's GGSN towards the VASP, i.e. for closed user base functionality.


Stipe

--
---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---



smime.p7s
Description: S/MIME Cryptographic Signature

Re: The wap gateway

[Nikos Balkanas]

Yes, wapbox is good only for wap 1.x traffic which is for older mobiles. For 
wap 2.x traffic you can use squid or any other HTTP proxy.


BR,
Nikos
- Original Message - 
From: "mattias" 

To: 
Sent: Saturday, June 04, 2011 10:09 PM
Subject: The wap gateway



So the gateway are only for old dialup on mobile phones
Not for modern gprs?

Re: The wap gateway

[Nikos Balkanas]

Your SIM card should be internet enabled to access your gateway.  That is 
more expensive than using a wap enabled SIM that accesses only your 
provider's gateway.


BR,
Nikos.
- Original Message - 
From: "Rene Kluwen" 

To: "'mattias'" 
Cc: 
Sent: Sunday, June 05, 2011 12:22 AM
Subject: RE: The wap gateway



The settings for gprs are similar to the ones that you use for dial-up.
Your mobile operator charges you for any data traffic. But usually gprs is 
a

lot cheaper than CSD (dial-up).
Just enter the ip address of your Kannel instance in your WAP gateway
settings.
I think that should do the trick.

== Rene

-Original Message-
From: mattias [mailto:m...@mjw.se]
Sent: Saturday, 04 June, 2011 21:21
To: 'Rene Kluwen'
Subject: RE: The wap gateway

Sorry for private mail
But in the faq I only see a section for dialup
But
How should the settings for gprs look like?
And
If I understand this correct can I surf the net from my phone and not pay 
my

mobele operator?
-Original Message-
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
Of Rene Kluwen
Sent: Saturday, June 04, 2011 9:16 PM
To: users@kannel.org
Subject: Re: The wap gateway


The wireless session protocol can be used on any ip network. Including
gprs/umts/hsdpa.

== Rene


-Original Message-
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
Of mattias
Sent: Saturday, 04 June, 2011 21:09
To: users@kannel.org
Subject: The wap gateway

So the gateway are only for old dialup on mobile phones
Not for modern gprs?

RE: The wap gateway

[Rene Kluwen]

The settings for gprs are similar to the ones that you use for dial-up.
Your mobile operator charges you for any data traffic. But usually gprs is a
lot cheaper than CSD (dial-up).
Just enter the ip address of your Kannel instance in your WAP gateway
settings.
I think that should do the trick.

== Rene

-Original Message-
From: mattias [mailto:m...@mjw.se] 
Sent: Saturday, 04 June, 2011 21:21
To: 'Rene Kluwen'
Subject: RE: The wap gateway

Sorry for private mail
But in the faq I only see a section for dialup
But 
How should the settings for gprs look like?
And
If I understand this correct can I surf the net from my phone and not pay my
mobele operator?
-Original Message-
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
Of Rene Kluwen
Sent: Saturday, June 04, 2011 9:16 PM
To: users@kannel.org
Subject: Re: The wap gateway


The wireless session protocol can be used on any ip network. Including
gprs/umts/hsdpa.

== Rene


-Original Message-
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
Of mattias
Sent: Saturday, 04 June, 2011 21:09
To: users@kannel.org
Subject: The wap gateway

So the gateway are only for old dialup on mobile phones
Not for modern gprs?







smime.p7s
Description: S/MIME cryptographic signature

Re: The wap gateway

[Rene Kluwen]

The wireless session protocol can be used on any ip network. Including
gprs/umts/hsdpa.

== Rene


-Original Message-
From: users-boun...@kannel.org [mailto:users-boun...@kannel.org] On Behalf
Of mattias
Sent: Saturday, 04 June, 2011 21:09
To: users@kannel.org
Subject: The wap gateway

So the gateway are only for old dialup on mobile phones
Not for modern gprs?





smime.p7s
Description: S/MIME cryptographic signature

The wap gateway

[mattias]

So the gateway are only for old dialup on mobile phones
Not for modern gprs?

Re: Checking whether the WAP gateway is alive

[Nikos Balkanas]

Hi,

I believe that all of these are explained in the User's Doc. Have you read 
it?


Example:

http://localhost:/?password=

where  is one of the words listed.

And to check the alive, you have to use a mobile and request:

http://kannel:alive

BR,
Nikos

- Original Message - 
From: "Harmeet" 

To: 
Sent: Wednesday, June 30, 2010 1:59 PM
Subject: Checking whether the WAP gateway is alive



Hi,

I am using the following URL :

http://localhost:1300/kannel:alive   it is not working . It shows me that

Unknown command `/kannel:alive'.
Possible commands are:
status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
add-smsc
remove-smsc
reload-lists
But i can check the status with the help of followng 
command.http://localhost:1300/status.html?password=kannelstatus


Please help.

Regards
Harmeet Singh

Re: Checking whether the WAP gateway is alive

[Harmeet]

Hi,

Please refer to the kannel CVS userguide , There is mention that :

Checking whether the WAP gateway is alive

You can check whether the WAP gateway (both the bearerbox and the wapbox) is 
alive by fetching the
URL kannel:alive.

at page no 33 . Please help me to know how to implement this command.


Regards
Harmeet Singh

- Original Message - 
From: "Kiran Reddy" 
To: "Harmeet" 
Cc: 
Sent: Wednesday, June 30, 2010 5:08 PM
Subject: Re: Checking whether the WAP gateway is alive


> Hi Harmeet,
> 
> using http://localhost:1300/stauts?password=password you can check the 
> status of kannel and wap and other things and you can use below Possible 
> commands  other then these command you can not specify any other 
> commands. for more info read kannel user guide.
> status
> store-status
> log-level
> shutdown
> suspend
> isolate
> resume
> restart
> flush-dlr
> stop-smsc
> start-smsc
> add-smsc
> remove-smsc
> reload-lists
> 
> Regards,
> Kiran Reddy
> 
> On 6/30/2010 4:29 PM, Harmeet wrote:
>> Hi,
>>
>> I am using the following URL :
>>
>> http://localhost:1300/kannel:alive   it is not working . It shows me that
>>
>> Unknown command `/kannel:alive'.
>> Possible commands are:
>> status
>> store-status
>> log-level
>> shutdown
>> suspend
>> isolate
>> resume
>> restart
>> flush-dlr
>> stop-smsc
>> start-smsc
>> add-smsc
>> remove-smsc
>> reload-lists
>> But i can check the status with the help of followng 
>> command.http://localhost:1300/status.html?password=kannelstatus
>>
>> Please help.
>>
>> Regards
>> Harmeet Singh
>>
>>
>>
>>
>>
> 
> 
>

Re: Checking whether the WAP gateway is alive

[Kiran Reddy]

Hi Harmeet,

using http://localhost:1300/stauts?password=password you can check the 
status of kannel and wap and other things and you can use below Possible 
commands  other then these command you can not specify any other 
commands. for more info read kannel user guide.

status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
add-smsc
remove-smsc
reload-lists

Regards,
Kiran Reddy

On 6/30/2010 4:29 PM, Harmeet wrote:

Hi,

I am using the following URL :

http://localhost:1300/kannel:alive   it is not working . It shows me that

Unknown command `/kannel:alive'.
Possible commands are:
status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
add-smsc
remove-smsc
reload-lists
But i can check the status with the help of followng 
command.http://localhost:1300/status.html?password=kannelstatus


Please help.

Regards
Harmeet Singh

Checking whether the WAP gateway is alive

[Harmeet]

Hi,

I am using the following URL :

http://localhost:1300/kannel:alive   it is not working . It shows me that

Unknown command `/kannel:alive'.
Possible commands are:
status
store-status
log-level
shutdown
suspend
isolate
resume
restart
flush-dlr
stop-smsc
start-smsc
add-smsc
remove-smsc
reload-lists
But i can check the status with the help of followng 
command.http://localhost:1300/status.html?password=kannelstatus


Please help.

Regards
Harmeet Singh 

Java API for Kannel SMS/WAP gateway

[Justin Cater]

Hello all,

We released version 1.0.2 of Java API for Kannel SMS/WAP gateway.

The latest version introduces prioritized WAP Push functionality and bulk
WAP Push messaging.

For more information visit our blog <http://javacodegeeks.blogspot.com/>

The upcoming version will introduce, scheduled messaging, so stay tuned!


Best Regards

Justin

Java API for Kannel SMS/WAP gateway

[Justin Cater]

Hello all,

We released version 1.0.1 of Java API for Kannel SMS/WAP gateway.

In the latest version a bug is fixed concerning the GSM encoding of SMS
messages. Now messages are properly encoded and send to the SMSC for all
available encodings (GSM, UTF-8, UCS2)

The latest version also introduces WAP Push functionality. You can send a
WAP Push message using a single API command.

For more information visit our blog <http://javacodegeeks.blogspot.com/>

The upcoming version will introduce, bulk WAP Push messaging functionality
and prioritization of WAP Push messages, so stay tuned!


Best Regards

Justin

Re: Wap gateway using HTTP request

[Nikos Balkanas]

Nope. Kannel is a wap 1.x gateway, not a wap 2.x. It doesn't listen to tcp 
80 for traffic. You can use squid for that.


BR,
Nikos
- Original Message - 
From: "Jefri Abdullah" 

To: 
Sent: Wednesday, April 07, 2010 4:21 AM
Subject: Wap gateway using HTTP request



Hi, I try to using kannel as wap gateway on my environment, I found
that kannel only using wap protocol stack. Is it possible to use
kannel if client sending regular HTTP request to kannel? I attached
capture from client request.

Best Regards,

Jefri Abdullah

--
NULL

Wap gateway using HTTP request

[Jefri Abdullah]

Hi, I try to using kannel as wap gateway on my environment, I found
that kannel only using wap protocol stack. Is it possible to use
kannel if client sending regular HTTP request to kannel? I attached
capture from client request.

Best Regards,

Jefri Abdullah

-- 
NULL
<>

RE: Can't find a port to receive link request in wap gateway

[Kao. Josh (GSM)]

Dear Nikos, 

 

I guess I know what going on. 

Since I check the cell phone spec, Nokia 1606, which I use, I find its
browser support WAP 2.0, which can use HTTP proxy directly to be its WAP
gateway.

(I also used winwap smartphone browser emulator and configured http
proxy to kannel and it can't work)

And I think it is also the reason why I only can capture packet via
filter tcp port 9201, and get nothing via filter udp port 9201 (I'd
tried it before).

So..how do you think? Is it possible to be the reason why kannel
can't work?

 

Best Regards,

Josh

 

 



From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
Sent: Friday, February 06, 2009 7:12 PM
To: Kao. Josh (GSM)
Cc: us...@vm1.kannel.org
Subject: Re: Can't find a port to receive link request in wap gateway

 

Hi Josh,

Traffic is transparent for all mobile types that support WAP 1.x.

You only need udp 9200 - 9203 for wap traffic. No tcp and no other
ports.

I use wireshark on windows, too. If you specify in the filter udp, it
will capture udp traffic. I do it all the time.

BR,

Nikos

 




 
This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any action 
in
reliance upon this information, by persons or entities other than the intended 
recipient is prohibited. 
 

 
 

Re: Can't find a port to receive link request in wap gateway

[Nikos Balkanas]

Hi Josh,

Traffic is transparent for all mobile types that support WAP 1.x.

You only need udp 9200 - 9203 for wap traffic. No tcp and no other ports.

I use wireshark on windows, too. If you specify in the filter udp, it will
capture udp traffic. I do it all the time.

BR,

Nikos

On Fri, Feb 6, 2009 at 12:32 PM, Kao. Josh (GSM) wrote:

>  Dear Nikos,
>
>
>
> Is it different behavior to connect to wap gateway between GSM and CDMA
> phone? I forgot mention that my cell phone is CDMA phone.
>
> I used to connect to nowsms successfully, but nowsms is a commercial
> software, so I want to try kannel.
>
>
>
> I check my firewall again and the tcp and udp port 9200 ~ 9207 is open.
>
> Since wireshark capture the link request on tcp port and bearerbox is bound
> to udp, that why I curious how them meet together.
>
>
>
> Finally, I really appreciate your great help, thank you very much!
>
>
>
> Best Regards,
>
> Josh
>
>
>  --
>
> *From:* Nikos Balkanas [mailto:nbalka...@gmail.com]
> *Sent:* Friday, February 06, 2009 5:49 PM
>
> *To:* Kao. Josh (GSM); us...@vm1.kannel.org
> *Subject:* Re: Can't find a port to receive link request in wap gateway
>
>
>
> Hi Josh,
>
>
>
> That's strange. In my Solaris server typing netstat -a | grep 9200 returns:
>
>
>
> *.9200  Idle
>
>
>
> The problem is firewall/access issue.
>
>
>
> UDP Ports 9200 - 9203 (9202 & 9203 if you enable wtls) are standard for wap
> 1.x and your mobile will use them by default. You need to have a wap 1.x
> mobile and possibly an Internet enabled SIM card, so that you can access
> your gateway by IP. You have also to allow connections to your WAP ports
> from  your MSN to your gateway.
>
>
>
> BR,
>
> Nikos
>
>
>
>
>
>
>
>
>
>
>
> 
> This message may contain information which is private, privileged or
> confidential of Compal Communications, Inc. If you are not the intended
> recipient of
> this message, please notify the sender and destroy/delete the message. Any
> review, retransmission, dissemination or other use of, or taking of any
> action in reliance upon this information, by persons or entities other than
> the intended recipient is prohibited.
> 
>
>

RE: Can't find a port to receive link request in wap gateway

[Kao. Josh (GSM)]

Dear Nikos, 

 

Is it different behavior to connect to wap gateway between GSM and CDMA
phone? I forgot mention that my cell phone is CDMA phone. 

I used to connect to nowsms successfully, but nowsms is a commercial
software, so I want to try kannel.

 

I check my firewall again and the tcp and udp port 9200 ~ 9207 is open. 

Since wireshark capture the link request on tcp port and bearerbox is
bound to udp, that why I curious how them meet together. 

 

Finally, I really appreciate your great help, thank you very much!

 

Best Regards,

Josh

 



From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
Sent: Friday, February 06, 2009 5:49 PM
To: Kao. Josh (GSM); us...@vm1.kannel.org
Subject: Re: Can't find a port to receive link request in wap gateway

 

Hi Josh,

 

That's strange. In my Solaris server typing netstat -a | grep 9200
returns:

 

*.9200  Idle

 

The problem is firewall/access issue.

 

UDP Ports 9200 - 9203 (9202 & 9203 if you enable wtls) are standard for
wap 1.x and your mobile will use them by default. You need to have a wap
1.x mobile and possibly an Internet enabled SIM card, so that you can
access your gateway by IP. You have also to allow connections to your
WAP ports from  your MSN to your gateway.

 

BR,

Nikos




 
This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any action 
in
reliance upon this information, by persons or entities other than the intended 
recipient is prohibited. 
 

 
 

Re: Can't find a port to receive link request in wap gateway

[Nikos Balkanas]

Hi Josh,

That's strange. In my Solaris server typing netstat -a | grep 9200 returns:

*.9200  Idle

The problem is firewall/access issue.

UDP Ports 9200 - 9203 (9202 & 9203 if you enable wtls) are standard for wap 1.x 
and your mobile will use them by default. You need to have a wap 1.x mobile and 
possibly an Internet enabled SIM card, so that you can access your gateway by 
IP. You have also to allow connections to your WAP ports from  your MSN to your 
gateway.

BR,
Nikos
  - Original Message - 
  From: Kao. Josh (GSM) 
  To: Nikos Balkanas ; users@kannel.org 
  Sent: Friday, February 06, 2009 8:29 AM
  Subject: RE: Can't find a port to receive link request in wap gateway


  Dear Nikos, 

   

  I check “netstat –a|grep 9200” and it doesn’t show anything. 

  Since I supposed bearerbox is bound to tcp port, I didn’t check udp port 
before. 

  So I try “netstat -tulnp” and it shows there is bearerbox process running on 
the udp port 9200 and 9201 respectly. 

  I attach the netstat –tulnp result in the following.

   

  [r...@localhost sbin]# netstat -tulnp

  Active Internet connections (only servers)

  Proto Recv-Q Send-Q Local Address   Foreign Address 
State   PID/Program name   

  tcp0  0 0.0.0.0:13000   0.0.0.0:*   
LISTEN  5611/bearerbox  

  tcp0  0 0.0.0.0:13002   0.0.0.0:*   
LISTEN  5611/bearerbox  

  tcp0  0 0.0.0.0:111 0.0.0.0:*   
LISTEN  2040/rpcbind

  tcp0  0 127.0.0.1:631   0.0.0.0:*   
LISTEN  2647/cupsd  

  tcp0  0 127.0.0.1:250.0.0.0:*   
LISTEN  2510/sendmail: acce 

  tcp0  0 0.0.0.0:58235   0.0.0.0:*   
LISTEN  2060/rpc.statd  

  tcp0  0 :::22   :::*
LISTEN  2489/sshd   

  udp0  0 0.0.0.0:32768   0.0.0.0:* 
  2060/rpc.statd  

  udp0  0 0.0.0.0:32769   0.0.0.0:* 
  2629/avahi-daemon:  

  udp0  0 0.0.0.0:943 0.0.0.0:* 
  2040/rpcbind

  udp0  0 0.0.0.0:964 0.0.0.0:* 
  2060/rpc.statd  

  udp0  0 0.0.0.0:53530.0.0.0:* 
  2629/avahi-daemon:  

  udp0  0 0.0.0.0:111 0.0.0.0:* 
  2040/rpcbind

  udp0  0 0.0.0.0:92000.0.0.0:* 
  5611/bearerbox  

  udp0  0 0.0.0.0:92010.0.0.0:* 
  5611/bearerbox  

  udp0  0 0.0.0.0:631 0.0.0.0:* 
  2647/cupsd

   

  So bearerbox is bound to udp 9200 and 9201, but my cell phone still can’t 
connect to it, do you what happen?

  By the way, just for curious. Since link request uses tcp connection, but 
bearerbox is bount to udp port, how do we make them meet together?

   

  Best Regards,

  Josh

   

   


--

  From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
  Sent: Thursday, February 05, 2009 6:36 PM
  To: Kao. Josh (GSM); us...@vm1.kannel.org
  Subject: Re: Can't find a port to receive link request in wap gateway

   

  Hi Kao,

   

  Are you sure that "netstat -a | grep 9200" doesn't show anything? 

  If you look at your udpc_create it clearly shows that bearerbox binds to udp 
9200.

   

  Probably your netstat output is wrong.

   

  BR,

  Nikos












  

  This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of 
  this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any 
  action in reliance upon this information, by persons or entities other than 
the intended recipient is prohibited.
  

  

RE: Can't find a port to receive link request in wap gateway

[Kao. Josh (GSM)]

Dear Nikos, 

 

I check "netstat -a|grep 9200" and it doesn't show anything. 

Since I supposed bearerbox is bound to tcp port, I didn't check udp port
before. 

So I try "netstat -tulnp" and it shows there is bearerbox process
running on the udp port 9200 and 9201 respectly. 

I attach the netstat -tulnp result in the following.

 

[r...@localhost sbin]# netstat -tulnp

Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address   Foreign Address
State   PID/Program name   

tcp0  0 0.0.0.0:13000   0.0.0.0:*
LISTEN  5611/bearerbox  

tcp0  0 0.0.0.0:13002   0.0.0.0:*
LISTEN  5611/bearerbox  

tcp0  0 0.0.0.0:111 0.0.0.0:*
LISTEN  2040/rpcbind

tcp0  0 127.0.0.1:631   0.0.0.0:*
LISTEN  2647/cupsd  

tcp0  0 127.0.0.1:250.0.0.0:*
LISTEN  2510/sendmail: acce 

tcp0  0 0.0.0.0:58235   0.0.0.0:*
LISTEN  2060/rpc.statd  

tcp0  0 :::22   :::*
LISTEN  2489/sshd   

udp0  0 0.0.0.0:32768   0.0.0.0:*
2060/rpc.statd  

udp0  0 0.0.0.0:32769   0.0.0.0:*
2629/avahi-daemon:  

udp0  0 0.0.0.0:943 0.0.0.0:*
2040/rpcbind

udp0  0 0.0.0.0:964 0.0.0.0:*
2060/rpc.statd  

udp0  0 0.0.0.0:53530.0.0.0:*
2629/avahi-daemon:  

udp0  0 0.0.0.0:111 0.0.0.0:*
2040/rpcbind

udp0  0 0.0.0.0:92000.0.0.0:*
5611/bearerbox  

udp0  0 0.0.0.0:92010.0.0.0:*
5611/bearerbox  

udp0  0 0.0.0.0:631 0.0.0.0:*
2647/cupsd

 

So bearerbox is bound to udp 9200 and 9201, but my cell phone still
can't connect to it, do you what happen?

By the way, just for curious. Since link request uses tcp connection,
but bearerbox is bount to udp port, how do we make them meet together?

 

Best Regards,

Josh

 

 



From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
Sent: Thursday, February 05, 2009 6:36 PM
To: Kao. Josh (GSM); us...@vm1.kannel.org
Subject: Re: Can't find a port to receive link request in wap gateway

 

Hi Kao,

 

Are you sure that "netstat -a | grep 9200" doesn't show anything? 

If you look at your udpc_create it clearly shows that bearerbox binds to
udp 9200.

 

Probably your netstat output is wrong.

 

BR,

Nikos




 
This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any 
action in reliance upon this information, by persons or entities other than the 
intended recipient is prohibited. 
 

 
 

Re: Can't find a port to receive link request in wap gateway

[Nikos Balkanas]

Hi Kao,

You are doing fine with the mailing list. Plus you know how to use Wireshark on 
your own! This should be a breeze.

Smells like a firewall issue. However it is not, since it would show in netstat.

Let's look at some logs:

Kill all bearerbox wapbox processes.

Start from one shell:

bearebox -v 0 

>From another shell:

wapbox -v 0 

Cpature and post. Also please post your entire confile with * where you want to 
hide info. I can't see anything wrong with what you posted, so there might be 
something bad elsewhere.

BR,
Nikos

  - Original Message - 
  From: Kao. Josh (GSM) 
  To: Nikos Balkanas ; users@kannel.org 
  Sent: Wednesday, February 04, 2009 4:45 AM
  Subject: RE: Can't find a port to receive link request in wap gateway


  Dear Nikos, 

   

  Thanks for you suggestion! 

   

  I’ve put password in my original kannel.conf, I am sorry that I should put 
some * mark in this column so that it wouldn’t misleading you, sorry again!

  I also try your suggestion command and it shows the pid and my bearerbox 
running command.

   

  I’ve tried to use wireshark (ethreal) to capture the incoming port 9201 
packets and find the kernel will response a RST/ACK when it receives my cell 
phone’s link request. 

  So I suppose for some reason kernel doesn’t have any record that there is a 
TCP process listening on the port 9201. Any idea about it?

   

  Please tell me if you need more information and please give me some 
suggestions if you have any idea. Thank you very much!

   

  Best Regards,

  Josh

   

  p.s: It’s my first time to use mail list, hope it is a proper way to post a 
reply message.

   


--

  From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
  Sent: Tuesday, February 03, 2009 9:23 PM
  To: Kao. Josh (GSM); us...@vm1.kannel.org
  Subject: Re: Can't find a port to receive link request in wap gateway

   

  Try "pgrep -fl bearerbox". You shouldn't see anything running.

  Look at bearerbox.log to find the reason. You should find a panic because it 
is missing admin-password.

   

  Solution: Put an admin-password.

   

  BR,

  Nikos

- Original Message - 

From: Kao. Josh (GSM) 

To: users@kannel.org 

Sent: Tuesday, February 03, 2009 7:43 AM

Subject: Can't find a port to receive link request in wap gateway

 

Dear all, 

     

I am trying setup Kannel to be a wap gateway for a long time, but I always 
have a problem when wap browser connects to Kannel. I find there doesn’t have a 
port to receive wap browser’s link request because wap browser always show the 
gateway timeout alert (I set port 9201 on the wap browser gateway port). I use 
“netstat” and can’t find any process listening wap related port such as 9200, 
9201…etc. I’ve tried fake wap sender and it works fine. The following is my 
Kannel configuration; almost all of them are default value.

 

group = core 

admin-port = 13000 

wapbox-port = 13002 

admin-password = 

wdp-interface-name = "*" 

log-file = "/tmp/kannel.log" 

log-level = 0 

box-deny-ip = "*.*.*.*" 

box-allow-ip = "127.0.0.1" 

#admin-deny-ip = "" 

#admin-allow-ip = "" 

 

group = wapbox 

bearerbox-host = 127.0.0.1

log-file = "/tmp/wapbox.log" 

log-level = 0 

syslog-level = none

 

I already google this problem for a long time but can’t find any 
information. So, is there anyone have some idea about this situation? Any clue 
is appreciated! Thank you very much!

 

Best Regards,

Josh

 














This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of 
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any 
action in reliance upon this information, by persons or entities other than 
the intended recipient is prohibited.


  

 












  

  This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of 
  this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination

RE: Can't find a port to receive link request in wap gateway

[Kao. Josh (GSM)]

Dear Nikos, 

 

Thanks for you suggestion! 

 

I've put password in my original kannel.conf, I am sorry that I should
put some * mark in this column so that it wouldn't misleading you, sorry
again!

I also try your suggestion command and it shows the pid and my bearerbox
running command.

 

I've tried to use wireshark (ethreal) to capture the incoming port 9201
packets and find the kernel will response a RST/ACK when it receives my
cell phone's link request. 

So I suppose for some reason kernel doesn't have any record that there
is a TCP process listening on the port 9201. Any idea about it?

 

Please tell me if you need more information and please give me some
suggestions if you have any idea. Thank you very much!

 

Best Regards,

Josh

 

p.s: It's my first time to use mail list, hope it is a proper way to
post a reply message.

 



From: Nikos Balkanas [mailto:nbalka...@gmail.com] 
Sent: Tuesday, February 03, 2009 9:23 PM
To: Kao. Josh (GSM); us...@vm1.kannel.org
Subject: Re: Can't find a port to receive link request in wap gateway

 

Try "pgrep -fl bearerbox". You shouldn't see anything running.

Look at bearerbox.log to find the reason. You should find a panic
because it is missing admin-password.

 

Solution: Put an admin-password.

 

BR,

Nikos

- Original Message - 

From: Kao. Josh (GSM) <mailto:josh_...@compalcomm.com>  

To: users@kannel.org 

Sent: Tuesday, February 03, 2009 7:43 AM

    Subject: Can't find a port to receive link request in wap
gateway

 

Dear all, 

     

I am trying setup Kannel to be a wap gateway for a long time,
but I always have a problem when wap browser connects to Kannel. I find
there doesn't have a port to receive wap browser's link request because
wap browser always show the gateway timeout alert (I set port 9201 on
the wap browser gateway port). I use "netstat" and can't find any
process listening wap related port such as 9200, 9201...etc. I've tried
fake wap sender and it works fine. The following is my Kannel
configuration; almost all of them are default value.

 

group = core 

admin-port = 13000 

wapbox-port = 13002 

admin-password = 

wdp-interface-name = "*" 

log-file = "/tmp/kannel.log" 

log-level = 0 

box-deny-ip = "*.*.*.*" 

box-allow-ip = "127.0.0.1" 

#admin-deny-ip = "" 

#admin-allow-ip = "" 

 

group = wapbox 

bearerbox-host = 127.0.0.1

log-file = "/tmp/wapbox.log" 

log-level = 0 

syslog-level = none

 

I already google this problem for a long time but can't find any
information. So, is there anyone have some idea about this situation?
Any clue is appreciated! Thank you very much!

 

Best Regards,

Josh

 
















This message may contain information which is private,
privileged or confidential of Compal Communications, Inc. If you are not
the intended recipient of 
this message, please notify the sender and destroy/delete the
message. Any review, retransmission, dissemination or other use of, or
taking of any 
action in reliance upon this information, by persons or entities
other than the intended recipient is prohibited.



  

 




 
This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any action 
in
reliance upon this information, by persons or entities other than the intended 
recipient is prohibited. 
 

 
 

Re: Can't find a port to receive link request in wap gateway

[Nikos Balkanas]

Try "pgrep -fl bearerbox". You shouldn't see anything running.
Look at bearerbox.log to find the reason. You should find a panic because it is 
missing admin-password.

Solution: Put an admin-password.

BR,
Nikos
  - Original Message - 
  From: Kao. Josh (GSM) 
  To: users@kannel.org 
  Sent: Tuesday, February 03, 2009 7:43 AM
  Subject: Can't find a port to receive link request in wap gateway


  Dear all, 

   

  I am trying setup Kannel to be a wap gateway for a long time, but I always 
have a problem when wap browser connects to Kannel. I find there doesn’t have a 
port to receive wap browser’s link request because wap browser always show the 
gateway timeout alert (I set port 9201 on the wap browser gateway port). I use 
“netstat” and can’t find any process listening wap related port such as 9200, 
9201…etc. I’ve tried fake wap sender and it works fine. The following is my 
Kannel configuration; almost all of them are default value.

   

  group = core 

  admin-port = 13000 

  wapbox-port = 13002 

  admin-password = 

  wdp-interface-name = "*" 

  log-file = "/tmp/kannel.log" 

  log-level = 0 

  box-deny-ip = "*.*.*.*" 

  box-allow-ip = "127.0.0.1" 

  #admin-deny-ip = "" 

  #admin-allow-ip = "" 

   

  group = wapbox 

  bearerbox-host = 127.0.0.1

  log-file = "/tmp/wapbox.log" 

  log-level = 0 

  syslog-level = none

   

  I already google this problem for a long time but can’t find any information. 
So, is there anyone have some idea about this situation? Any clue is 
appreciated! Thank you very much!

   

  Best Regards,

  Josh

   












  

  This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of 
  this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any 
  action in reliance upon this information, by persons or entities other than 
the intended recipient is prohibited.
  

  

Can't find a port to receive link request in wap gateway

[Kao. Josh (GSM)]

Dear all, 

 

I am trying setup Kannel to be a wap gateway for a long time, but I
always have a problem when wap browser connects to Kannel. I find there
doesn't have a port to receive wap browser's link request because wap
browser always show the gateway timeout alert (I set port 9201 on the
wap browser gateway port). I use "netstat" and can't find any process
listening wap related port such as 9200, 9201...etc. I've tried fake wap
sender and it works fine. The following is my Kannel configuration;
almost all of them are default value.

 

group = core 

admin-port = 13000 

wapbox-port = 13002 

admin-password = 

wdp-interface-name = "*" 

log-file = "/tmp/kannel.log" 

log-level = 0 

box-deny-ip = "*.*.*.*" 

box-allow-ip = "127.0.0.1" 

#admin-deny-ip = "" 

#admin-allow-ip = "" 

 

group = wapbox 

bearerbox-host = 127.0.0.1

log-file = "/tmp/wapbox.log" 

log-level = 0 

syslog-level = none

 

I already google this problem for a long time but can't find any
information. So, is there anyone have some idea about this situation?
Any clue is appreciated! Thank you very much!

 

Best Regards,

Josh

 




 
This message may contain information which is private, privileged or 
confidential of Compal Communications, Inc. If you are not the intended 
recipient of
this message, please notify the sender and destroy/delete the message. Any 
review, retransmission, dissemination or other use of, or taking of any 
action in reliance upon this information, by persons or entities other than the 
intended recipient is prohibited. 
 

 
 

Re: wap gateway error

[Stipe Tolj]

mohmmad jarwan schrieb:

Hi
after i configuration  the wap  gateway  and try to test it  to make 
sure it's working i try

(curl "http://localhost:15000/shutdown?password=ros123";)
it return to me that error  : curl: (7) couldn't connect to host, why?


wapbox has no HTTP admin interface as bearerbox does.

From which user's guide reference you think this should be possible?

Stipe

---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

Re: wap gateway error

[mohmmad jarwan]

- Original Message 
From: mohmmad jarwan <[EMAIL PROTECTED]>
To: Hanna Kreitem <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED]
Sent: Tuesday, 1 April, 2008 6:15:07 PM
Subject: Re: wap gateway error

thankx for replay 
the wap box running at port 15000 and no firewall active 
if ther is any other solution tell me

- Original Message 
From: Hanna Kreitem <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Tuesday, 1 April, 2008 6:02:43 PM
Subject: Re: wap gateway error

Hello Mohammad,

To trace this error, make sure that the wap box is running at port 15000, and 
no firewall is activated at that port.



Hanna



t's working i try 
(curl "http://localhost:15000/shutdown?password=ros123";)
it return to me that error  : curl: (7) couldn't connect to host, why?

can any one help me to solve that.
thankx.


  Sent from Yahoo! Mail.
A Smarter Inbox.








  Sent from Yahoo! Mail.
A Smarter Inbox.





  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

wap gateway error

[mohmmad jarwan]

Hi
after i configuration  the wap  gateway   and try to test it  to make sure it's 
working i try 
(curl "http://localhost:15000/shutdown?password=ros123";)
it return to me that error  : curl: (7) couldn't connect to host, why?

can any one help me to solve that.
thankx.



  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

Re: MMS wap gateway

[Remon Magdy]

I successfully installed NowSMS on linux using wine.

Regards,
Remon

Michael Sole wrote:


Not on Linux (that I know off).

 


There is a windows based app call SMSNow which is pretty good.

 


*From:* mohmmad jarwan [mailto:[EMAIL PROTECTED]
*Sent:* Monday, March 31, 2008 8:43 AM
*To:* [EMAIL PROTECTED]
*Cc:* users@kannel.org
*Subject:* UNS: Re: MMS wap gateway

 


thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

You need to use Mbuni and Kannel.

 


*From:* mohmmad jarwan [mailto:[EMAIL PROTECTED]
*Sent:* Monday, March 31, 2008 8:19 AM
*To:* users@kannel.org
*Subject:* MMS wap gateway

 


Hi
i want to send MMS and i wandering can i use kannel as mms gateway 
alone ,or i used Mbuni that based on kannel ,or i use Mbuni alone 
without kannel

what way more effective and more reliability .

Are three way is true (can send MMS with it)

 




Yahoo! for Good helps you make a difference 
<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=51947/*http:/uk.promotions.yahoo.com/forgood/>


 

 




Yahoo! for Good helps you make a difference 
<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=51947/*http:/uk.promotions.yahoo.com/forgood/>

Re: MMS wap gateway

[Remon Magdy]

You need to use Mbuni as VAS MMS gateway for sending MMS, kannel itself 
doesn't have any MMS modules. On the other hand to install Mbuni and 
start working with it, you should have Kannel installed on the same 
server. There is no need for Kannel to be running but it should be 
installed.


Regards,
Remon

mohmmad jarwan wrote:

Hi
i want to send MMS and i wandering can i use kannel as mms gateway 
alone ,or i used Mbuni that based on kannel ,or i use Mbuni alone 
without kannel

what way more effective and more reliability .

Are three way is true (can send MMS with it)


Yahoo! for Good helps you make a difference 

Re: Re: MMS wap gateway

[mohmmad jarwan]

ok thanx

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Cc: users@kannel.org
Sent: Monday, 31 March, 2008 3:45:19 PM
Subject: RE: Re: MMS wap gateway

  

Not on Linux (that I know off).
   
 There is a windows based app call SMSNow which is pretty good.
   
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:43 AM
To: [EMAIL PROTECTED]
Cc: users@kannel.org
Subject: UNS: Re: MMS wap gateway
 

  
 thanx  for that but is
ther any solution without using Mbuni.
 - Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway
 You need to use Mbuni and Kannel.
  
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway
 

 
 Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
usedMbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)
 

 
 
Yahoo! for Good helps you make a difference
 

  
 

  
 
Yahoo! for Good helps you make
a difference
 






  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

RE: Re: MMS wap gateway

[Michael Sole]

Not on Linux (that I know off).

 

There is a windows based app call SMSNow which is pretty good.

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:43 AM
To: [EMAIL PROTECTED]
Cc: users@kannel.org
Subject: UNS: Re: MMS wap gateway

 

thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

You need to use Mbuni and Kannel.

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway

 

Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)

 

  _  

Yahoo! for Good helps you make a difference 
<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=51947/*http:/uk.promotions.yahoo.com/forgood/>
 

 

 

  _  

Yahoo! for Good helps you make 
<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=51947/*http:/uk.promotions.yahoo.com/forgood/>
  a difference

Re: MMS wap gateway

[mohmmad jarwan]

thanx  for that but is ther any solution without using Mbuni.

- Original Message 
From: Michael Sole <[EMAIL PROTECTED]>
To: mohmmad jarwan <[EMAIL PROTECTED]>
Sent: Monday, 31 March, 2008 3:33:38 PM
Subject: RE: MMS wap gateway

  

You need to use Mbuni and Kannel.
   
 From: mohmmad jarwan[mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 8:19 AM
To: users@kannel.org
Subject: MMS wap gateway
 

  
 Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or 
iused Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)
 

  
 
Yahoo! for Good helps you make
a difference
 






  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

RE: MMS wap gateway

[Aamir Jamil Rao]

Hi Jarwan,

 

For sending MMS , you can use Mbuni alone with MM7 acting as VAS gateway , or 
You can use Mbuni as standalone MMSC , you will have to use kannel with it for 
sending MMS notifications.

 

Kannel alone is only used for sending text messages and not MMS.

 

-junaid

 

 

From: mohmmad jarwan [mailto:[EMAIL PROTECTED] 
Sent: Monday, March 31, 2008 5:19 PM
To: users@kannel.org
Subject: MMS wap gateway

 

Hi 
i want to send MMS and i wandering can i use kannel as mms gateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbuni alone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)

 

  _  

Yahoo! for Good helps you make 
<http://us.rd.yahoo.com/mailuk/taglines/isp/control/*http:/us.rd.yahoo.com/evt=51947/*http:/uk.promotions.yahoo.com/forgood/>
  a difference

MMS wap gateway

[mohmmad jarwan]

Hi 
i want to send MMS and i wandering can i use kannel as mmsgateway alone ,or i 
used Mbuni that based on kannel ,or i use Mbunialone without kannel 
what way more effective and more reliability .

Are three way is true (can send MMS with it)



  __
Sent from Yahoo! Mail.
A Smarter Inbox http://uk.docs.yahoo.com/nowyoucan.html

Re: WAP gateway

[Kudzai Gadzira]

Hi

If i understand correctly for question 1>> if you want the wap site to
be hosted on your own machine you will need a web server and access it
through localhost if its on the same machine as your kannel or access
it through an ip adress if it is connected by another computer and say
if you use Apache you can store it under htdocs. If you want it to be
hosted say by web hosting company make sure they have a wap gateway.

for question 2>> writing your pages from scratch is more of a likely
option. My advice is that you use XHML MP which can make your site
accessible both via web and wap, otherwise if you use WML and / HTML
you will be faced with the dilemma of updating or making changes to
your site more than just once.


On Nov 19, 2007 2:15 PM, Sriram <[EMAIL PROTECTED]> wrote:
>
>
> Hi All
>
> I am a content provider for a mobile telco. I have been using kannel as sms
> gateway for providing some content to the telco and to push messages. He now
> wants me to put up a WAP site for my brand so that his customers can browse
> my site on their cellphones. Pls note that i already have my website but its
> being hosted at a data center.
>
> What i would like to know :
>
> 1. If i use Kannel as the WAP gateway do i need anything additional in terms
> of webserver etc ?
> 2. will i have to write wml pages and upload wbmp images from scratch? Where
> will i be storing all these files ie under which folder ? will they be
> stored in the kannel machine itself or any other machine ?
>
> Pls revert
>
> Thanks
> Sriram
>

RE: WAP gateway

[info.ubichip]

I think the question is more : do you take care of the wap gw or your telco
has already a wap gateway ?

After it will be more easy to answer your question

 

 

BR

  _  

From: Sriram [mailto:[EMAIL PROTECTED] 
Sent: lundi 19 novembre 2007 04:15
To: users@kannel.org
Subject: WAP gateway

 

Hi All

 

I am a content provider for a mobile telco. I have been using kannel as sms
gateway for providing some content to the telco and to push messages. He now
wants me to put up a WAP site for my brand so that his customers can browse
my site on their cellphones. Pls note that i already have my website but its
being hosted at a data center.

 

What i would like to know :

 

1. If i use Kannel as the WAP gateway do i need anything additional in terms
of webserver etc ?

2. will i have to write wml pages and upload wbmp images from scratch? Where
will i be storing all these files ie under which folder ? will they be
stored in the kannel machine itself or any other machine ?

 

Pls revert 

 

Thanks

Sriram

 



  _  

Antivirus avast! <http://www.avast.com> : message Sortant sain. 


Base de donnees virale (VPS) : 071119-1, 19/11/2007
Analyse le : 19/11/2007 14:08:41
avast! - copyright (c) 1988-2007 ALWIL Software.

WAP gateway

[Sriram]

Hi All

I am a content provider for a mobile telco. I have been using kannel as sms 
gateway for providing some content to the telco and to push messages. He now 
wants me to put up a WAP site for my brand so that his customers can browse my 
site on their cellphones. Pls note that i already have my website but its being 
hosted at a data center.

What i would like to know :

1. If i use Kannel as the WAP gateway do i need anything additional in terms of 
webserver etc ?
2. will i have to write wml pages and upload wbmp images from scratch? Where 
will i be storing all these files ie under which folder ? will they be stored 
in the kannel machine itself or any other machine ?

Pls revert 

Thanks
Sriram

Fwd: Kannel wap gateway over iden

[Víctor Alfonso]

Hi all

I need install an run a kannel wap gateway over iden phones (nextell
phones).
Some have using kannel wap gateway over this phones??

Regards ,


--
Vìctor Nieto

managing wap gateway.....

[tushar]

 

 

 Hi all,



   Is there any script out there for administrating WAP gateway for
managing users accessing through it?

   If anyone is having any reference links please send it to me.

 

Thanx and Regards

 

Tushar

 

content type problem in wap gateway....

[Tushar]

Hi all,

  I have been using kannel since a long time..I am able to access
wap pages thru kannel wap gateway but the problem I m getting is 

Images are not shown on the wap page. The warning I m getting is like:

 

WARNING: WSP: content-type  not supported

 

Images are not being supported by gateway..

 

 

I think this is b'coz I m using a cimd2 smsc account. What u guys have to
say about it? Plz help me out ..  

 

Thanx and Regards,

 

Tushar

 

Wap gateway settings to fetch outside pages.

[Arun Jain]

Hello Group,

With my Wap gateway I am able to access internal pages.  But for pages
outside the firewall I
have to go through the proxy and proxy must verify me with my username and
password/

I can fetch all intranet pages however when I access.

google.com,


2006-12-20 11:49:51 [8081] [5] DEBUG: WTP 36: New state RESULT_WAIT

2006-12-20 11:49:51 [8081] [10] DEBUG: Path: /

2006-12-20 11:49:51 [8081] [10] DEBUG: Query: (null)

2006-12-20 11:49:51 [8081] [10] DEBUG: Fragment: (null)

2006-12-20 11:49:51 [8081] [10] ERROR: Error while gw_gethostbyname occurs.

2006-12-20 11:49:51 [8081] [10] ERROR: System error 1: Operation not
permitted

2006-12-20 11:49:51 [8081] [10] ERROR: gethostbyname failed

2006-12-20 11:49:51 [8081] [10] ERROR: System error 2: No such file or
directory

2006-12-20 11:49:51 [8081] [10] ERROR: error connecting to server
`www.google.com' at port `80'2006-12-20 11:49:51 [8081] [10] DEBUG: HTTP:
Opening connection to `www.google.com:80' (fd=0).

2006-12-20 11:49:51 [8081] [10] ERROR: Couldn't send request to <
http://www.google.com:80>

2006-12-20 11:49:51 [8081] [7] ERROR: WSP: HTTP lookup failed, oops
2006-12-20 11:49:51 [8081] [7] WARNING: WSP: Content type  not
supported by client,

Can someone please tell me the settings for the wap gateway so that I can
access outside
pages.

Thanks.

nagrik

Wap gateway testing

[Arun Jain]

Hello Group,

Has anybody installed Wap gateway behind company's firewall and tested it
there with the
live phone.

If yes please let me know.

Thanks.

nagrik

Re: Working with Wap gateway

[Stipe Tolj]

Arun Jain wrote:


Hello Group,

I have installed my wap gateway and I have tested it with the fakewap
command.  Now I
want to test it with real phone. I have access to Motorola ascensioni P3
phone.

Can someone direct me to all the steps necessary to make my wapgateway
functional.
I probably will have to create a profile and set some parameters on my 
phone

as well.


Hi Arun,

the issue is as follows:

There is no (ok, let's relativate: it's tricky and out of scope for this issue 
here) change to connect a real phone with Kannel (running as WAP gw) via some 
kind of serial or bluetooth connection...


(Sidenote: some OS of phones, ie. Symbian on Nokias can be "tricked" to use a IP 
stack via bluetooth instead of GPRS bearer, but that's tricky).


You will have to establish a GPRS session with your phone (via a dedicated APN) 
and then can address Kannel's WDP, WTP ports for WAP 1.2.x gateway functionality.


Now, here the next "problem" starts. ;) Usualy GSM network providers offer 
dedicated APNs for WAP and MMS. Both usually will NOT allow you to connect to an 
"unknown" IP for WAP gw packets. In this case you need to use a so called 
"Internet APN", that is "open" in terms of packet filtering.


Once again: Using a WAP GW is more something for a wireless carrier (that have 
access to core infrastructure nodes, ie. GPRS APNs) and not for VASPs or alike.


Stipe

---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

Working with Wap gateway

[Arun Jain]

Hello Group,

I have installed my wap gateway and I have tested it with the fakewap
command.  Now I
want to test it with real phone. I have access to Motorola ascensioni P3
phone.

Can someone direct me to all the steps necessary to make my wapgateway
functional.
I probably will have to create a profile and set some parameters on my phone
as well.

Please help.

Thanks.

nagrik

Re: Wap gateway testing errors

[Stipe Tolj]

Arun Jain wrote:


Dear group,

I am testing my wap gate way.

1.  My first command is

./bearerbox -v -1 smskannel.conf,

where smskannel.conf is as follow.


br, all wrong here... you are firing bearerbox up in SMS gateway mode only 
then.

Please use this for simple testing:

  $ cd gw
  $ ./bearerbox wapkannel.conf &> /dev/null &
  $ ./wapbox wapkannel.conf &> /dev/null &
  $ ../test/fakewap -g localhost http://wap.web.de/

Stipe

---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

Wap gateway testing errors

[Arun Jain]

Dear group,

I am testing my wap gate way.

1.  My first command is

./bearerbox -v -1 smskannel.conf,

where smskannel.conf is as follow.

*

#-

# CORE

#

# There is only one core group and it sets all basic settings

# of the bearerbox (and system). You should take extra notes on

# configuration variables like 'store-file' (or 'store-dir'),

# 'admin-allow-ip' and 'access.log'



group = core

admin-port = 13000

smsbox-port = 13001

wapbox-port = 13002

admin-password = bar

#status-password = foo

#admin-deny-ip = ""

#admin-allow-ip = ""

#log-file = "/tmp/kannel.log"

#log-level = 0

box-deny-ip = "*.*.*.*"

box-allow-ip = "127.0.0.1"

#unified-prefix = "+358,00358,0;+,00"

#access-log = "/tmp/access.log"

#store-file = "kannel.store"

#ssl-server-cert-file = "cert.pem"

#ssl-server-key-file = "key.pem"

#ssl-certkey-file = "mycertandprivkeyfile.pem"





group = smsc

smsc = fake

smsc-id = FAKE

port = 1

connect-allow-ip = 127.0.0.1





group = smsbox

bearerbox-host = 127.0.0.1

sendsms-port = 13013

global-sender = 13013

#sendsms-chars = "0123456789 +-"

#log-file = "/tmp/smsbox.log"

#log-level = 0

#access-log = "/tmp/access.log"





group = wapbox

bearerbox-host = 127.0.0.1

#log-file = "/tmp/wapbox.log"

#log-level = 0

syslog-level = none

#access-log = "/tmp/wapaccess.log"



// And other sms information.

**

2.  My second command is

./wapbox -v -1 sapkannel.conf,

where wapkannel.conf is as follow.



*

group = core

admin-port = 13000

wapbox-port = 13002

admin-password = bar

#status-password = foo

#admin-deny-ip = ""

#admin-allow-ip = ""

wdp-interface-name = "*"

#log-file = "/tmp/bearerbox.log"

#log-level = 0

box-deny-ip = "*.*.*.*"

box-allow-ip = "127.0.0.1"

#access-log = "/tmp/access.log"

#store-file = "/tmp/kannel.store"

#ssl-server-cert-file = "cert.pem"

#ssl-server-key-file = "key.pem"

#ssl-certkey-file = "mycertandprivkeyfile.pem"

group = wapbox

bearerbox-host = 127.0.0.1

#log-file = "/tmp/wapbox.log"

#log-level = 0

syslog-level = none

#access-log = "/tmp/wapaccess.log"


3.  My third command is

./test/fakewap -g 127.0.0.1 http:/wap.wep.de/  (Stipe told me to fire this
command).  However, I got the following
errors.

**

/home/w1036/kannel/gateway-1.4.1/test>./fakewap -g 127.0.0.1
http://wap.web.de/

2006-11-27 14:32:31 [13979] [0] INFO: fakewap starting

2006-11-27 14:32:41 [13979] [0] INFO: Timeout while receiving from socket.

2006-11-27 14:32:41 [13979] [0] PANIC: Receive WSP_ConnectReply failed

2006-11-27 14:32:41 [13979] [0] PANIC: ./fakewap(gw_panic+0xfd) [0x80595f5]

2006-11-27 14:32:41 [13979] [0] PANIC: ./fakewap(vfprintf+0x1417)
[0x80501e7]

2006-11-27 14:32:41 [13979] [0] PANIC: ./fakewap(main+0x2f0) [0x8050528]

2006-11-27 14:32:41 [13979] [0] PANIC:
/lib/tls/libc.so.6(__libc_start_main+0xda) [0xbb678a]

2006-11-27 14:32:41 [13979] [0] PANIC: ./fakewap(SSL_write+0x41) [0x804f4a1]

***

I would also like to test my wap gateway from a live motorola phone with
T-mobile sim card.  Can someone tell me
the steps for testing and also the errors I am making in starting my wap
gateway/fakewap.

Thanks in advance.

nagrik

How to test WAP gateway.

[Arun Jain]

Hello Group,

I see examples to test sms gateway by typing "test/...", however could
someone tell me as to how to
test the WAP gateway.

thanks.

arun

J2ME and kannel wap gateway to access http servlet

[Linkas]

Hello list!

I'm a happy kannel user since more than a couple of years now, but I've 
used it only as a sms interface from http to some protocols like smpp, 
emi or at-commands and for these I really need to THANK the guys 
outthere: Andreas, Bruno, Stipe and Aarno(also thanks for helping in the 
userlist), Alexander, Lars  and Kalle.


Actually I'm shaking toghether many tecnologies from jsp, php, j2me, sms 
and so on to develop a new service.


First I've used kannel to send sms messages to a j2me application to 
interact with them, and succeed :-D

I've also used kannel to configure SyncML services :-D
Then I've tryed to send the j2me application with sms/ota tecnologies 
using wappushes, and also succeed in delivery contents to phones.


The second step was to let a j2me application talk to my servlet on an 
http server (such as apache) and, as soon as my j2me phone uses a "gprs 
internet" connection, everything works fine.


Now I'm facing that using "wap connection", my telco wap-gateway don't 
like the HttpConnection my j2me application tries to open.
So to let my j2me application talk to my webserver using a wap 
connection, what should I do ?


1) configure the kannel wap gateway, use the telco's "wap connection" 
and access to the wap-gateway url wich access the webserver


OR

2) configure the kannel wap gateway, create a own "wap connection" using 
my wap gateway ip address in the proxy setting


So, any idea ?

Also, a detail: should my webserver speak "wml" or "html" ?

Does anyone has experience with this ?

Thanks
J

Re: How to test Kannel as WAP Gateway?

[Stipe Tolj]

aliraza raza wrote:


hello everyone,
 I want to test Kannel as a WAP Gateway but dont know 
how to do it. guide me after this step?
All the configurations for wap box is done in conf file. like wapbox 
port and wapbox goup.


first i have started my bearerbox service with command ./bearerbox -v 1 
kannelwwap.conf


then i started wapbox service with command ./wapbox -v kannelwap.conf

after this i dont know wht to do next. In case of SMS Gateway we use 
fakesmsc command to test kannel. i read that there is also a fakewap 
command but i dont know its format neither giude has its format 
written.for example i want to call a jsp page  hello.jsp from my 
server.  It generates WML with "hello world" written. 
"http://localhost:8084/wml/hello.jsp"; is the URl of my page .tel me how 
to call this page using Fake WAP command.


You can test the WAP 1.2.x functionality by using the test/fakewap application 
within Kannel, simply issue


  $ cd gateway
  $ ./test/fakewap -g 127.0.0.1 http://wap.foobar.com/

in order to issue WTP PDUs to bearerbox and wapbox. wapbox will then do a HTTP 
GET request to the desired URL and transode the pure HTTP again to WTP PDUs to 
fakewap.


See test/fakewap for more runtime options.

Stipe

---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

How to test Kannel as WAP Gateway?

[aliraza raza]

hello everyone,
 I want to test Kannel as a WAP Gateway but dont know how 
to do it. guide me after this step?
All the configurations for wap box is done in conf file. like wapbox port 
and wapbox goup.


first i have started my bearerbox service with command ./bearerbox -v 1 
kannelwwap.conf


then i started wapbox service with command ./wapbox -v kannelwap.conf

after this i dont know wht to do next. In case of SMS Gateway we use 
fakesmsc command to test kannel. i read that there is also a fakewap command 
but i dont know its format neither giude has its format written.for example 
i want to call a jsp page  hello.jsp from my server.  It generates WML with 
"hello world" written. "http://localhost:8084/wml/hello.jsp"; is the URl of 
my page .tel me how to call this page using Fake WAP command.



Regards!!
Ali Raza
Student IT
Pakistan

Re: Looking for a CDMA SMS and WAP gateway (2nd posting)

[Stipe Tolj]

Rene Kluwen wrote:


Kannel DOES support CDMA networks in some way.
You just need an upstream (SMPP or thelike) provider that delivers to those
kinds of networks.

As for using Kannel with a CDMA SMS modem, I haven't found phones/modems
that support the extended GSM AT command set.


which ones do?


This is currently the only command set that is implemented. So if you want
to use Kannel with a virtual SMSC (a phone or modem) you are out of luck.


I agree with Rene here.

For the WAP part this is more generic. WAP considers the presence of IP on the 
device/network, so if the CDMA network allows you to establish a TCP/IP stack 
you can use Kannel as WAP gateway.


Stipe

---
Kölner Landstrasse 419
40589 Düsseldorf, NRW, Germany

tolj.org system architecture  Kannel Software Foundation (KSF)
http://www.tolj.org/  http://www.kannel.org/

mailto:st_{at}_tolj.org   mailto:stolj_{at}_kannel.org
---

Re: Looking for a CDMA SMS and WAP gateway (2nd posting)

[Alex Antropoff]

On Fri, May 19, 2006 at 10:47:46PM +0200, Rene Kluwen wrote:
RK> Is this using the ETSI extended AT set?
RK> Or some proprietary interface? Because that is what Nokia does with their
RK> CDMA phones.
RK> And it doesn't work with Kannel.
Proprietary.

-- 
Regards, 
Alex Antropoff

RE: Looking for a CDMA SMS and WAP gateway (2nd posting)

[Rene Kluwen]

Is this using the ETSI extended AT set?
Or some proprietary interface? Because that is what Nokia does with their
CDMA phones.
And it doesn't work with Kannel.

Rene Kluwen
Chimit

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Alex Antropoff
Sent: vrijdag 19 mei 2006 10:47
To: users@kannel.org
Subject: Re: Looking for a CDMA SMS and WAP gateway (2nd posting)


On Fri, May 19, 2006 at 04:51:50AM +0200, Rene Kluwen wrote:
RK> Kannel DOES support CDMA networks in some way.
RK> You just need an upstream (SMPP or thelike) provider that delivers to
those
RK> kinds of networks.
RK>
RK> As for using Kannel with a CDMA SMS modem, I haven't found phones/modems
RK> that support the extended GSM AT command set.
RK> This is currently the only command set that is implemented. So if you
want
RK> to use Kannel with a virtual SMSC (a phone or modem) you are out of
luck.
RK>
RK> Rene Kluwen
RK> Chimit
AFAIK All SK Teletech phones can send sms using AT commands.

--
Regards,
Alex Antropoff

Re: Looking for a CDMA SMS and WAP gateway (2nd posting)

[Alex Antropoff]

On Fri, May 19, 2006 at 04:51:50AM +0200, Rene Kluwen wrote:
RK> Kannel DOES support CDMA networks in some way.
RK> You just need an upstream (SMPP or thelike) provider that delivers to those
RK> kinds of networks.
RK> 
RK> As for using Kannel with a CDMA SMS modem, I haven't found phones/modems
RK> that support the extended GSM AT command set.
RK> This is currently the only command set that is implemented. So if you want
RK> to use Kannel with a virtual SMSC (a phone or modem) you are out of luck.
RK> 
RK> Rene Kluwen
RK> Chimit
AFAIK All SK Teletech phones can send sms using AT commands.

-- 
Regards, 
Alex Antropoff

RE: Looking for a CDMA SMS and WAP gateway (2nd posting)

[Rene Kluwen]

Kannel DOES support CDMA networks in some way.
You just need an upstream (SMPP or thelike) provider that delivers to those
kinds of networks.

As for using Kannel with a CDMA SMS modem, I haven't found phones/modems
that support the extended GSM AT command set.
This is currently the only command set that is implemented. So if you want
to use Kannel with a virtual SMSC (a phone or modem) you are out of luck.

Rene Kluwen
Chimit


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Stéphane Bruno
Sent: donderdag 18 mei 2006 19:09
To: users@kannel.org
Subject: Looking for a CDMA SMS and WAP gateway (2nd posting)


Hello,

It seams that kannel only supports GSM networks, but I would like also
to support CDMA networks. Can I do that with Kannel? If yes, how? If no,
what other product I could use to support SMS and WAP on CDMA networks,
preferably open source?

It is my second posting. Can someone help me?

Thanks,
Stéphane

Looking for a CDMA SMS and WAP gateway (2nd posting)

[Stéphane Bruno]

Hello,

It seams that kannel only supports GSM networks, but I would like also
to support CDMA networks. Can I do that with Kannel? If yes, how? If no,
what other product I could use to support SMS and WAP on CDMA networks,
preferably open source?

It is my second posting. Can someone help me?

Thanks,
Stéphane

Looking for a CDMA SMS and WAP gateway

[Stéphane Bruno]

Hello,

It seams that kannel only supports GSM networks, but I would like also 
to support CDMA networks. Can i do that with Kannel? If yes, how? If no, 
what other product I could use to support SMS and WAP on CDMA networks, 
preferably open source?


Stéphane

Radius Authentication / Wap Gateway

[cool planet]

Hi Friends,      Currently i'm having a wap gateway from a different vendor , and there is a radius server for user authentication . But it seems to be cant handle the access load.      So we supposed to have kannel as our wap gateway ,      questio is ,        How i integrated kannel-wapgateway and our current radius server for user authentication      our radiusserver > kannel WAP-Gateway >> wap server     Thanx in advance,  Kane.
		Yahoo! Photos – Showcase holiday pictures in hardcover 
Photo Books. You design it and we’ll bind it!

wap gateway

[cool planet]

Hi ,     Can we use "MAP-URL" for load balancing ?      as an example we have two different wap gatweways. one is kannel . but clients are using only one gateway's ip address as their gatway address.     How would be balance the load of access the gateways     Thank you ,  Kane.         
	
		Yahoo! Photos 
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.

Re: Accessing the WAP Gateway

[Yasser Sultan]

Hi
Thanks I did manage to run simulate kannel through winwap browser.(by 
connecting linux and windows over LAN)

But what  if I want to use the gateway to access wap through my mobile 
phone?
Like you are given a gateway IP address by the cellular provider which you 
put in  your mobile settings, what will be that IP address ?

Suppose my computer running kannel has a public IP address of  203.81.224.10 
 so  I should be able to access kannel gateway over
http://203.81.224.10:9201   but when I do this I get an error ?


Thanks




From: "AKSHAY" <[EMAIL PROTECTED]>
Reply-To: AKSHAY <[EMAIL PROTECTED]>
To: users@kannel.org
Subject: Re: users Digest, Vol 16,Issue 45 re  to 7. Accessing the WAP 
Gateway (Yasser Sultan)
Date: 1 May 2005 04:16:02 -

  Dear
 yasser  sultan

y.s :i am running kannel wap gateway and want to access it through my moble
phone or through some wap  simulator ?
ANS :it is  possible  to  do it  via emaultors(simulators  ) from
  nokia internet  toolkit available  on nokia website( u have  to register 
first) , there is another winwap browser avaiable  on internet.

Y.S :I have a question that  what will be the IP which I will enter as the 
IP
address of the gateway and what will be the Port no ?
ANS : THE IP ADDRESS  OF  THE  GATEWAY WILL BE THE  IP ADDRESS
  OF THE MACHINE RUNNING  THE GATEWAY (ON  LAN )

   THE  PORT NUMBER FOR  GOOD  RESULT  IS 9201
  I  HOPE  IT  SOLVES  YOUR PROBLEM



>
>
>
>Talk about Love/Friendship and get Relationship Advice at Latestngreatest
>Forums
>http://www.latestngreatest.net/cgi-bin/Blah/Blah.pl/Blah.pl

  REGARDS
   AKSHAY
_
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

Re: users Digest, Vol 16, Issue 45 re to 7. Accessing the WAP Gateway (Yasser Sultan)

[AKSHAY]

  
Dear 

 yasser  sultan



y.s :i am running kannel wap gateway and want to access it through my moble 
phone or through some wap  simulator ?

ANS :it is  possible  to  do it  via emaultors(simulators  ) from  
  nokia internet  toolkit available  on nokia website( u have  to register first) , there is another winwap browser avaiable  on internet.


Y.S :I have a question that  what will be the IP which I will enter as the IP 
address of the gateway and what will be the Port no ?
ANS : THE IP ADDRESS  OF  THE  GATEWAY WILL BE THE  IP ADDRESS
      OF THE MACHINE RUNNING  THE GATEWAY (ON  LAN ) 
 
       THE  PORT NUMBER FOR  GOOD  RESULT  IS 9201

  I  HOPE  IT  SOLVES  YOUR PROBLEM
         






On Sat, 30 Apr 2005 [EMAIL PROTECTED] wrote :
>Send users mailing list submissions to
>      users@kannel.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>      http://www.kannel.org/mailman/listinfo/users
>or, via email, send a message with subject or body 'help' to
>      [EMAIL PROTECTED]
>
>You can reach the person managing the list at
>      [EMAIL PROTECTED]
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of users digest..."
>
>
>Today's Topics:
>
>    1. Modem send and receive getting clogged - newbie qu (James Carlyle)
>    2. RE: Changing Sender (Ramesh T S)
>    3. DLR success issue (info.ubichip IMAP)
>    4. Aliases for sms-service is working (Bart Ronsyn)
>    5. TLV Params (Rafael Ugolini)
>    6. Re: TLV Params (Rodrigo Cremaschi)
>    7. Accessing the WAP Gateway (Yasser Sultan)
>
>
>--
>
>Message: 1
>Date: Fri, 29 Apr 2005 12:53:57 +0100
> From: James Carlyle <[EMAIL PROTECTED]>
>Subject: Modem send and receive getting clogged - newbie qu
>To: users@kannel.org
>Message-ID: <[EMAIL PROTECTED]>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi
>
>We have a Siemens MC35i modem attached to a Debian server running Kannel
>1.2.1 (the latest Debian package) and are building a simple receive /
>respond application.
>
>At low request volumes this setup works well with no problems.  At
>higher volumes (say 3 requests / minute) we see that requests are not
>arriving at the bearer box (by looking at the console) and indeed they
>are not even arriving at the modem.
>
>We have tried various CNMI settings for the modem including 1,2,0,1,0
>and 1,2,0,0,1 and even 2,2 but these don't seem to stop the clogging-up
>of requests.  It seems that the Orange network is being told to back off
>by the modem and is then not retrying to deliver until many hours later.
>
>My question is: Is it fundementally impossible to scale send/receive
>applications to several requests per minute using a single modem?  Is
>adding separate multiple send and receive modems a valuable step or
>should we move on to a proper SMSC setup provided by an operator?
>
>Thanks for your advice
>
>James
>
>
>
>--
>
>Message: 2
>Date: Fri, 29 Apr 2005 17:43:17 +0530
> From: "Ramesh T S" <[EMAIL PROTECTED]>
>Subject: RE: Changing Sender
>To: "Kyriacos Sakkas" <[EMAIL PROTECTED]>,     
>Message-ID: <[EMAIL PROTECTED]>
>Content-Type: text/plain;     charset="iso-8859-1"
>
>
>Kannel supports it the operator must allow alphanumeric characters in
>receiving/transmitting short codes.
>
>This is a message denied by the smsc.
>
>Ramesh
>-Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
>Behalf Of Kyriacos Sakkas
>Sent: Tuesday, April 26, 2005 4:04 PM
>To: users@kannel.org
>Subject: Changing Sender
>
>
>Hi all,
>     I have the following problem, I wish to be able to send messages
> from kannel (1.4 on Debian testing connected to 3 SMPP 3.4 and 1 CIMD2
>SMSC's) that instead of showing my number (short code) as the sender
>when delivered to an handset will show the name of our company, amongst
>some other text strings, already approved, and from what I am told
>configured for acceptance by the provider this needs to work through
>(SMPP connection).
>     I have put
>  faked-sender = MyText
>  in my sendsms-user group that sends via that specific SMSC, and it is
>passed to the provider as the sender in the SMPP PDU, but I get error
>0x000a Invalid Source Address.
>
>So the big questions:
>     Does Kannel support this?
>      If yes is my configuration completely of the mark?
>     If yes and my config is fine, is my provider just pulling my leg
>when they say that it has been configured (a real possibility with this
>guys)?
>     I

Accessing the WAP Gateway

[Yasser Sultan]

hi  all,
I am running kannel wap gateway and want to access it through my mobile 
phone or through some wap  simulator ?

I have a question that  what will be the IP which I will enter as the IP 
address of the gateway and what will be the Port no ?

thanks


Talk about Love/Friendship and get Relationship Advice at Latestngreatest 
Forums
http://www.latestngreatest.net/cgi-bin/Blah/Blah.pl/Blah.pl

_
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

Re: "Simulate" WAP Gateway [again]

[Aarno Syvänen]

Yep, you can configure it, but it does not necessarily work. Of course, 
you can try.
Your operator may be an expection.

Aarno
On 26.4.2005, at 07:14, Yasser Sultan wrote:
Sorry I didn't quite get you , can you explain it a bit ?
Do you mean that a wap gw is  a fixed part of GGSN node in GPRS 
infastucture so we are bound to use the gw present in GGSN and we 
can't use any other gateway ?

I thought that a GPRS APN has open internet access so we can configure 
the IP address of any gateway(in our mobile) ?

Thanks
Yasser
Talk about Love/Friendship and get Relationship Advice at 
Latestngreatest Forums
http://www.latestngreatest.net/cgi-bin/Blah/Blah.pl/Blah.pl



From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 16:57:40 +0200
That is more like a problem of GPRS, because wap gw is a part of GGSN.
CSD would usually work, and is not much slower either (strange but  
true).

Aarno
On 25.4.2005, at 15:00, Yasser Sultan wrote:
Yes , you are right it won't be a simulation than ..
I have a GPRS enabled phone in which for WAP I use the WAP gateway   
address  provided by my cellular provider, so if I change this 
address  to the address of my gateway than I suppose I will be able 
to showing  the working of kannel on a mobile phone ? (Please 
correct me If I am  wrong)

But do mobile operators allow connections to gateways others than  
theirs ?

Thanks
Yasser


From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 13:34:34 +0200
This would not be a simulation, but a real thing, would it ?
Aarno
On 25.4.2005, at 07:14, Yasser Sultan wrote:
Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi- 
kannelwap.html? ca=dgr-lnxw09WAPLinux

Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected  
through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is 
available   for a Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP  
address  of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator 
 and
you are done!"

Is there a way by which I can show the working of kannel wap 
gateway   on a MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's 
  FREE!  
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/



_
Don't just search. Find. Check out the new MSN Search!  
http://search.msn.com/


_
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

Re: "Simulate" WAP Gateway [again]

[Yasser Sultan]

Sorry I didn't quite get you , can you explain it a bit ?
Do you mean that a wap gw is  a fixed part of GGSN node in GPRS infastucture 
so we are bound to use the gw present in GGSN and we can't use any other 
gateway ?

I thought that a GPRS APN has open internet access so we can configure the 
IP address of any gateway(in our mobile) ?

Thanks
Yasser
Talk about Love/Friendship and get Relationship Advice at Latestngreatest 
Forums
http://www.latestngreatest.net/cgi-bin/Blah/Blah.pl/Blah.pl



From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 16:57:40 +0200
That is more like a problem of GPRS, because wap gw is a part of GGSN.
CSD would usually work, and is not much slower either (strange but  true).
Aarno
On 25.4.2005, at 15:00, Yasser Sultan wrote:
Yes , you are right it won't be a simulation than ..
I have a GPRS enabled phone in which for WAP I use the WAP gateway   
address  provided by my cellular provider, so if I change this address  to 
the address of my gateway than I suppose I will be able to showing  the 
working of kannel on a mobile phone ? (Please correct me If I am  wrong)

But do mobile operators allow connections to gateways others than  theirs 
?

Thanks
Yasser


From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 13:34:34 +0200
This would not be a simulation, but a real thing, would it ?
Aarno
On 25.4.2005, at 07:14, Yasser Sultan wrote:
Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi- kannelwap.html? 
ca=dgr-lnxw09WAPLinux

Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected  through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available   
for a Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP  address  
of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator  and
you are done!"

Is there a way by which I can show the working of kannel wap gateway   
on a MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's   
FREE!  http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/



_
Don't just search. Find. Check out the new MSN Search!  
http://search.msn.com/


_
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/

Re: "Simulate" WAP Gateway [again]

[Aarno Syvänen]

That is more like a problem of GPRS, because wap gw is a part of GGSN.
CSD would usually work, and is not much slower either (strange but  
true).

Aarno
On 25.4.2005, at 15:00, Yasser Sultan wrote:
Yes , you are right it won't be a simulation than ..
I have a GPRS enabled phone in which for WAP I use the WAP gateway   
address  provided by my cellular provider, so if I change this address  
to the address of my gateway than I suppose I will be able to showing  
the working of kannel on a mobile phone ? (Please correct me If I am  
wrong)

But do mobile operators allow connections to gateways others than  
theirs ?

Thanks
Yasser


From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 13:34:34 +0200
This would not be a simulation, but a real thing, would it ?
Aarno
On 25.4.2005, at 07:14, Yasser Sultan wrote:
Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi- 
kannelwap.html? ca=dgr-lnxw09WAPLinux

Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected  
through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available   
for a Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP  
address  of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator  
and
you are done!"

Is there a way by which I can show the working of kannel wap gateway  
 on a MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's   
FREE!  
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/



_
Don't just search. Find. Check out the new MSN Search!  
http://search.msn.com/

Re: "Simulate" WAP Gateway [again]

[Yasser Sultan]

Yes , you are right it won't be a simulation than ..
I have a GPRS enabled phone in which for WAP I use the WAP gateway  address  
provided by my cellular provider, so if I change this address to the address 
of my gateway than I suppose I will be able to showing the working of kannel 
on a mobile phone ? (Please correct me If I am wrong)

But do mobile operators allow connections to gateways others than theirs ?
Thanks
Yasser


From: Aarno Syvänen <[EMAIL PROTECTED]>
To: "Yasser Sultan" <[EMAIL PROTECTED]>
CC: users@kannel.org
Subject: Re: "Simulate" WAP Gateway [again]
Date: Mon, 25 Apr 2005 13:34:34 +0200
This would not be a simulation, but a real thing, would it ?
Aarno
On 25.4.2005, at 07:14, Yasser Sultan wrote:
Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi-kannelwap.html? 
ca=dgr-lnxw09WAPLinux

Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available  for a 
Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP address  of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator and
you are done!"

Is there a way by which I can show the working of kannel wap gateway  on a 
MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's  FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/



_
Don't just search. Find. Check out the new MSN Search! 
http://search.msn.com/

Re: "Simulate" WAP Gateway [again]

[Aarno Syvänen]

This would not be a simulation, but a real thing, would it ?
Aarno
On 25.4.2005, at 07:14, Yasser Sultan wrote:
Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi-kannelwap.html? 
ca=dgr-lnxw09WAPLinux

Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available  
for a Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP address  
of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator and
you are done!"

Is there a way by which I can show the working of kannel wap gateway  
on a MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's  
FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

"Simulate" WAP Gateway [again]

[Yasser Sultan]

Hi,
I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi-kannelwap.html?ca=dgr-lnxw09WAPLinux
Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available for a 
Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP address of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator and
you are done!"

Is there a way by which I can show the working of kannel wap gateway on a 
MOBILE phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

"Simulate" WAP Gateway

[Yasser Sultan]

I want to simulate the working of Kannel WAP gateway ?
I have found one method here
http://www-106.ibm.com/developerworks/linux/library/wi-kannelwap.html?ca=dgr-lnxw09WAPLinux
Which says that
"Testing with a WAP-enabled mobile phone simulator
You need two machines, one running a Windows® operating
system, and the other the Linux gateway, preferably connected through a
LAN. The Linux machine must be connected to the Internet, either
directly or indirectly.
You can use the Nokia 7210 Content Authoring SDK which is available for a 
Windows system.
Install it in a Windows system.
Do a little configuring and set the gateway address to the IP address of
the Linux machine running the gateway.
Now type any Web site address serving WML pages from the simulator and
you are done!"

Is there a way by which I can show the working of kannel wap on a mobile 
phone ?

Thanks
_
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

wap gateway

[I Hassani]

Hi Everybody :

I am discovering the kannel open source package,i find
it really great,and planes to use for some combinded
voip and sms applications,thanks a lot for the people
having got this idea.

I still have some problems answering the following
question :

When should one use a public Wap gateway and When
should he use a public one?,doesn 't the private one
need some special settings on the Mobile phone and
then make deployement of wap stuff difficult? 

Thank you
Ismail






Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/

Re: wap gateway via GPRS

[Stipe Tolj]

Tech mark wrote:
hi , 
 
Can v implement this wap gateway for GPRS network ? i meant can it possible to access wap contents via GPRS using kannel wap gateway ?
If it is possible , how many clients allowable to access via wap gateway ? Is there any load balancing mathod to use ?
yes. Kannel as a WAP gateway sits "on top" of the physical transmission layer 
which is either CSD or GPRS. Kannel needs IP connectivity to work. GPRS is the 
layer providing the IP connectivity.

There is not limitation in Kannel from software perspective.
Real-life operators (and setups I did too) use load-balanced machines via LVS to 
spread the load accross several machines. But you will need several hundred 
concurrent users per second to reach this demand and have a single machine 
running at it's physicall networking limits.

Stipe
mailto:stolj_{at}_wapme.de
---
Wapme Systems AG
Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany
phone: +49.211.74845.0
fax: +49.211.74845.299
mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de/
---

wap gateway via GPRS

[Tech mark]

hi , 
 
Can v implement this wap gateway for GPRS network ? i meant can it possible to access wap contents via GPRS using kannel wap gateway ?
If it is possible , how many clients allowable to access via wap gateway ? Is there any load balancing mathod to use ?
 
plz advice me 
 
Thanx in advance,
anaconda
		Do you Yahoo!? 
Yahoo! Mail - Helps protect you from nasty viruses.

Re: WAP Gateway

[Rene Kluwen]

Most operators have different GPRS APN's for MMS, Wap, and also one for
public internet.

If you want to use your own WAP gateway (e.g. Kannel) use the public
internet APN rather than the Wap APN.

Best regards,

Rene Kluwen
Chimit

- Original Message -
From: "Michael Mugge" <[EMAIL PROTECTED]>
To: 
Sent: Wednesday, December 29, 2004 9:47 PM
Subject: WAP Gateway


> Is anyone actually using kannel as WAP gateway over GPRS?
>
> Apparently here in the US, the carriers do not allow GPRS connections to
> gateways that are not in a subscribers list of allowed gateways (makes
> sense from a business point of view).
> Secondly, the phones sold by these carriers are loaded with software
> that prevents WAP Profile customization. Example T610 with T-Mobile has
> no "Internet Services" icon.
>
> Does any-one else have this problem?
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004
>
>
>
>
>

Please Help! Communicatig with the WAP gateway ?

[Rozsahegyi Robert]

Dear Arno,
 
Thank You for the quck reply.
I have to confess that I don't try this connection 
on the Kannel gateway, just on my GSM operator's WAP gateway. 
(t-mobile)
I think I came over the GPRS part of the 
connection,  I can send UDP packeges and I receive answer packages like 
this. 
(UDP layer parts removed in this example, it 
is just the user data. )
send: 0A 00 01 32  (try to connect anyhow on 
WTP) 
rec:   9C 80 01 19 00 
rec:   9C 80 01 19 00  

This package comes from time to time, I think I 
should ACK it, but don't know how. (Tried to compose ACK message, but not 
succeeded.)
What would be a general form of connecting to the 
gateway and send a "get URL" ?
 
Best Regards
   Robert
 
>Try first with dial-up link (CSD). GPRS 
has problems of its own>>Aarno>>On 11.1.2004, at 
12:10, Rozsahegyi Robert wrote:>>> 
Howdy List Members !>>  >> I would like to 
connect to a WAP gateway through GPRS, and fetch a >> simple wap page. (The UDP level of the stack 
is working now.)>> I read through 
the standards about WTP and WSP, but however an example 
>> would be very 
helpful.>> Does anyone have an example (eg. 
a package dump) about the followings ?>> - 
WTP/WSP connecting to the WAP gateway (on 9201)>> - WTP/WSP asking for a simple page (eg. http://checkip.dyndns.org/)>>  >> Thank for everyone who can help.>>   Robert

Re: Please Help! Communicatig with the WAP gateway ?

[Aarno Syvänen]

Try first with dial-up link (CSD). GPRS has problems of its own

Aarno

On 11.1.2004, at 12:10, Rozsahegyi Robert wrote:

Howdy List Members !
 
I would like to connect to a WAP gateway through GPRS, and fetch a simple wap page. (The UDP level of the stack is working now.)
I read through the standards about WTP and WSP, but however an example would be very helpful.
Does anyone have an example (eg. a package dump) about the followings ?
- WTP/WSP connecting to the WAP gateway (on 9201)
- WTP/WSP asking for a simple page (eg. http://checkip.dyndns.org/)
 
Thank for everyone who can help.
  Robert
 
 
 
 

Please Help! Communicatig with the WAP gateway ?

[Rozsahegyi Robert]

Howdy List Members !
 
I would like to connect to a WAP gateway through 
GPRS, and fetch a simple wap page. (The UDP level of the stack 
is working now.)
I read through the standards about WTP and 
WSP, but however an example would be very helpful.
Does anyone have an example (eg. a package dump) 
about the followings ?
- WTP/WSP connecting to the WAP gateway (on 
9201)
- WTP/WSP asking for a simple page (eg. http://checkip.dyndns.org/)
 
Thank for everyone who can help.
  Robert
 
 
 
 

WAP Gateway

[Michael Mugge]

Is anyone actually using kannel as WAP gateway over GPRS?

Apparently here in the US, the carriers do not allow GPRS connections to
gateways that are not in a subscribers list of allowed gateways (makes
sense from a business point of view).
Secondly, the phones sold by these carriers are loaded with software
that prevents WAP Profile customization. Example T610 with T-Mobile has
no "Internet Services" icon.

Does any-one else have this problem?

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.6.6 - Release Date: 12/28/2004
 

plz help for Wap Gateway

[Tech mark]

 
 
when up and running the wap gateway , in wapbox shown few unsatisfied errors. 
 
[7] WARNING: WSP: Device doesn't support charset  neither UTF-82004-12-06 12:44:03 [2370] [7] INFO: WBXML: No wbxml version given, assuming 1.1
 
where could be the error ? what kind of configuarions has to be done ?
 
plz help 
 
thanx
		Do you Yahoo!? 
Yahoo! Mail - Find what you need with new enhanced search. Learn more.

kannel wap gateway error

[Tech mark]

hi 
 
I installed and ran wap gateway. 
bearbox and wapgateway started.
when try to access a url of a internal webserver , from wap simulator gives 
 
Could not get URL http://internal ip:9201/HTTP Error : 404 (Connection refused (Error #10061))
what is this error ? how cqan i prevent this error ?
plz help
 
		Do you Yahoo!? 
Meet the all-new My Yahoo! – Try it today! 

wap gateway

[Piyush Sigtia]

H'llo friends,

I refered to the site and did the following:

1. Started the bearer box and wap box as follows:

 ./bearerbox -v 1 piyush.conf
 ./wapbox -v 1 piyush.conf

  The Wap gateway server is connected to the internet via a proxy.

2.  Downloaded the Nokia 7210 SDK
 Made it to point to the IP of WAP Gateway

3. Requested for http://nokia.com

Following error came

2004-11-09 13:03:25 [14428] [9] ERROR: Couldn't fetch <http://nokia.com>
2004-11-09 13:03:25 [14428] [7] ERROR: WSP: HTTP lookup failed, oops.
2004-11-09 13:03:25 [14428] [7] WARNING: WSP: Content type  not
supported by client, deleting body.

I tried many other sites like wap.yahoo.com all give me the same error.

Please help.

Warm Regards
Piyush Sigtia




-

One out of every four visually challenged people in the world is an Indian.
In a country of a billion plus, every year only 18000 individuals donate
their eyes.
At least 1.5 to 2 million Indians can benefit through the noble act of eye
donation. Pledge your eyes. For more information on eye donation call
39003100.
A public service message in support of the National Association for the
Blind (NAB).
-

Authentication of mobiles using kannel wap gateway

[Edelmira Mota Acosta]

Hello,
I want to if there is a way I can control/authenticate the mobiles that access my wap gateway. I installed Kannel versio 1.2.1 and it's already running, but I need a way to control which phone numbers can access it. How can I do that?
 
Thanks,
emotaFREE pop-up blocking with the new MSN Toolbar MSN Toolbar Get it now!

Motorola/Verizon v710 Can't Connect to WAP Gateway

[Adam Rosi-Kessel]

I'm having trouble getting my Motorola v710 (Verizon) phone to access the
Internet through a kannel WAP gateway I've set up on my server.

It works fine when I just use an HTTP gateway with squid as the proxy.

I don't know if the problem is my phone or the kannel setup, since I have
no other phone to test it with.

I'm using the Debian packages, version 1.2.1-5, on a Debian sid system.

bearerbox and wapbox seem to start up okay.  I can even see my phone
attempting to connect:

2004-09-14 16:45:05 [13] INFO: Client connected from <166.156.206.207>
2004-09-14 16:45:05 [13] DEBUG: setting up systems for new wapbox
2004-09-14 16:45:05 [13] DEBUG: Started thread 14 (gw/bb_boxc.c:boxc_sender)
2004-09-14 16:45:30 [13] INFO: Connection closed by the box <166.156.206.207>
2004-09-14 16:45:30 [14] DEBUG: Thread 14 (gw/bb_boxc.c:boxc_sender) terminates.
2004-09-14 16:45:30 [13] DEBUG: Thread 13 (gw/bb_boxc.c:function) terminates.

Where 166.156.206.207 is definitely my phone.

But it terminates after about 30 seconds, and the phone says "connection
lost."

There is no activity in wapbox.log during this time period; however.

I am using a very basic config, basically right out of the box:

group = core
admin-port = 13000
admin-password = [...xxx...]
admin-deny-ip = "*.*.*.*"
admin-allow-ip = "127.0.0.1"
wapbox-port = 13002
wdp-interface-name = "*"
log-file = "/var/log/kannel/bearerbox.log"
box-deny-ip = ""
box-allow-ip = "*.*.*.*"

group = wapbox
bearerbox-host = localhost
log-file = "/var/log/kannel/wapbox.log"

Can anyone suggest what I'm doing wrong or how to further troubleshoot
this issue?
-- 
Adam Rosi-Kessel
http://adam.rosi-kessel.org

Re: WAP gateway

[Stipe Tolj]

Hillel Bilman wrote:
Hi,
I'm using the SMS engine and I'd like to use the Kannel WAP gateway, but I
need to connect to
a service provider to deliver the WAP pushes. What I was asking was can
anyone recommend a commercial WAP service provider that works well with
Kannel that I can test the sending of WAP pushes and pay for the use of the
service.
You said "the Kannel REFPOOL machine (IP 62.96.19.67) services as the WAP
certification Kannel instance and is publicly available." Can you test WAP
push using it? If so, how would you advise doing this?
so you would like to send WAP push messages, ok, got that.
If you want to have them transported over SMS bearer and you are 
*already* connected to an SMSC using Kannel. You can use Kannel on its 
own (as PPG, push proxy gateway) to do this.

Please refer to the user's guide on how to setup the PPG part of Kannel.
Stipe
mailto:stolj_{at}_wapme.de
---
Wapme Systems AG
Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany
phone: +49.211.74845.0
fax: +49.211.74845.299
mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de/
---
-BEGIN PGP PUBLIC KEY BLOCK-
Version: GnuPG v1.2.2 (Cygwin)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=aYCI
-END PGP PUBLIC KEY BLOCK-

RE: WAP gateway

[Hillel Bilman]

Hi,

I'm using the SMS engine and I'd like to use the Kannel WAP gateway, but I
need to connect to
a service provider to deliver the WAP pushes. What I was asking was can
anyone recommend a commercial WAP service provider that works well with
Kannel that I can test the sending of WAP pushes and pay for the use of the
service.

You said "the Kannel REFPOOL machine (IP 62.96.19.67) services as the WAP
certification Kannel instance and is publicly available." Can you test WAP
push using it? If so, how would you advise doing this?

Thanks

-Original Message-
From: Stipe Tolj [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 12, 2004 5:16 PM
To: Hillel Bilman
Cc: Kannel Users
Subject: Re: WAP gateway


Hillel Bilman wrote:
> Dear WAP Kannel Uses,
>
> Does anyone know of a WAP gateway that I can use?

this is a funny question. Since you are subscribed to a mailing list
of a open source software project called 'Kannel', and that open
source software project is (also) an WAP gateway.

?!?!?

See http://www.kannel.org/ in case you haven't found it yet.

[scratching his head about the question]

Stipe

mailto:stolj_{at}_wapme.de
---
Wapme Systems AG

Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany

phone: +49.211.74845.0
fax: +49.211.74845.299

mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de/
---

-BEGIN PGP PUBLIC KEY BLOCK-
Version: GnuPG v1.2.2 (Cygwin)
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=aYCI
-END PGP PUBLIC KEY BLOCK-

Re: WAP gateway

[Stipe Tolj]

Hillel Bilman wrote:
Dear WAP Kannel Uses,
Does anyone know of a WAP gateway that I can use?
In case I mis-understood you, and you mean "Is there an public 
available Kannel WAP gateway installation, that we may try/use".

Yes, there is. The Kannel REFPOOL machine (IP 62.96.19.67) services as 
the WAP certification Kannel instance and is publically available.

Stipe
mailto:stolj_{at}_wapme.de
---
Wapme Systems AG
Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany
phone: +49.211.74845.0
fax: +49.211.74845.299
mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de/
---
-BEGIN PGP PUBLIC KEY BLOCK-
Version: GnuPG v1.2.2 (Cygwin)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=aYCI
-END PGP PUBLIC KEY BLOCK-

Re: WAP gateway

[Stipe Tolj]

Hillel Bilman wrote:
Dear WAP Kannel Uses,
Does anyone know of a WAP gateway that I can use?
this is a funny question. Since you are subscribed to a mailing list 
of a open source software project called 'Kannel', and that open 
source software project is (also) an WAP gateway.

?!?!?
See http://www.kannel.org/ in case you haven't found it yet.
[scratching his head about the question]
Stipe
mailto:stolj_{at}_wapme.de
---
Wapme Systems AG
Vogelsanger Weg 80
40470 Düsseldorf, NRW, Germany
phone: +49.211.74845.0
fax: +49.211.74845.299
mailto:info_{at}_wapme-systems.de
http://www.wapme-systems.de/
---
-BEGIN PGP PUBLIC KEY BLOCK-
Version: GnuPG v1.2.2 (Cygwin)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=aYCI
-END PGP PUBLIC KEY BLOCK-

WAP gateway

[Hillel Bilman]

Dear WAP Kannel Uses,

Does anyone know of a WAP gateway that I can use?

Thanks

wap gateway help newbie

[Ricki.]

Hello

I have installed kannel, and have it running with the supplied
wapkannel.conf. Everything is fine,
i have tested with the nokia 7210 content sdk and the gateway works.

Our local isp has not launched gprs as yet. How can i get my cell online.
Would i need to attach a modem to the
wap gatewap ?

Any help will be appreciated.
Thanks

Regards
Ricki.

wap gateway

[Andrzej Kalemba]

I use the kannel just the same way like Wap Gateway does and  everything
works fine except for one thing. The Wap Gateway quite often "questions
the telephone".
Maybe I'll explain it more precisely.
At the first connection with the Wap Gateway it looks like this:

>From the packages:

09:22:41.858333 gsm.operator.49569 > kannel.9201: udp 61
09:22:41.860523 kannel.9201 > gsm.operator.49569: udp 4 (DF)
09:22:43.439871 gsm.operator.49569 > kannel.9201: udp 566
09:22:43.441842 kannel.9201 > gsm.operator.49569: udp 3 (DF)
09:22:44.449922 gsm.operator.49569 > kannel.9201: udp 3
09:22:44.457938 kannel.9201 > gsm.operator.49569: udp 30 (DF)
09:22:45.410972 gsm.operator.49569 > kannel.9201: udp 3
09:22:46.307521 gsm.operator.49569 > kannel.9201: udp 61
09:22:46.401088 kannel.9201 > gsm.operator.49569: udp 219 (DF)
09:22:47.146901 gsm.operator.49569 > kannel.9201: udp

And from the logs:

2003-12-29 09:22:41 [7] DEBUG: datagram received
2003-12-29 09:22:41 [9] DEBUG: Did not find previous routing info for WDP,
generating new
2003-12-29 09:22:41 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:41 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:41 [12] DEBUG: boxc_receiver: got wdp from wapbox
2003-12-29 09:22:41 [8] DEBUG: udp: sending message
2003-12-29 09:22:43 [7] DEBUG: datagram received
2003-12-29 09:22:43 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:43 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:43 [12] DEBUG: boxc_receiver: got wdp from wapbox
2003-12-29 09:22:43 [8] DEBUG: udp: sending message
2003-12-29 09:22:44 [7] DEBUG: datagram received
2003-12-29 09:22:44 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:44 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:44 [12] DEBUG: boxc_receiver: got wdp from wapbox
2003-12-29 09:22:44 [8] DEBUG: udp: sending message
2003-12-29 09:22:45 [7] DEBUG: datagram received
2003-12-29 09:22:45 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:45 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:46 [7] DEBUG: datagram received
2003-12-29 09:22:46 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:46 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:46 [12] DEBUG: boxc_receiver: got wdp from wapbox
2003-12-29 09:22:46 [8] DEBUG: udp: sending message
2003-12-29 09:22:47 [7] DEBUG: datagram received
2003-12-29 09:22:47 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:22:47 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:22:57 [12] DEBUG: boxc_receiver: heartbeat with load value 0
received

If the next connection takes place after less than 30 seconds it looks
like this:

Packages:

09:23:05.215167 gsm.operator.49569 > kannel.9201: udp 61
09:23:05.306003 kannel.9201 > gsm.operator.49569: udp 219 (DF)
09:23:06.308183 gsm.operator.49569 > kannel.9201: udp 3

Logs:

2003-12-29 09:23:05 [7] DEBUG: datagram received
2003-12-29 09:23:05 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:23:05 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>
2003-12-29 09:23:05 [12] DEBUG: boxc_receiver: got wdp from wapbox
2003-12-29 09:23:05 [8] DEBUG: udp: sending message
2003-12-29 09:23:06 [7] DEBUG: datagram received
2003-12-29 09:23:06 [13] DEBUG: send_msg: sending msg to box: <127.0.0.1>
2003-12-29 09:23:06 [13] DEBUG: boxc_sender: sent message to <127.0.0.1>

However if  we wait more than 30 seconds the connection between the
telephone and the Wap Gateway is the same as at the first time,  so
unfortunately it is longer (more packages). As a result we send
more data and pay more. I must add that it doesn't matter
if the second page  that we are visitting is the same or another one.

So My question is: "How make this time of "remembering" information
about the telephone longer than 30 seconds e.g. 24 hours?"

I'm looking forward to hearing from you

Andrzej Kalemba :)

Re: Problem with WAP-Gateway/File sizes

[Bruno Rodrigues]

Aarno Syvänen <[EMAIL PROTECTED]> wrote:
> But your phone does accept 500k downloads? Does it support ESAR, then ?

All the nokia's symbian os at least. 

Unfortunately our CMG also didn't support ESAR, so we had to do a small
symbian app that fetches itself (through regular http) that 500+K
realplayer.sis.

Re: Problem with WAP-Gateway/File sizes

[Aarno Syvänen]

But your phone does accept 500k downloads? Does it support ESAR, then ?

Aarno

On 20.11.2003, at 23:52, Bruno Rodrigues wrote:

Igor Ivoilov <[EMAIL PROTECTED]> wrote:
I have changed packet size to be 1400 on my production server
and don't see any problem for now.
I have not see javagames more than 358k till now.
Please provide me with your opinion if we such change in cvs

Igor

Robert Hassing wrote:
This means that if I want to download a file with a size
higher as 143KB the
Weirdo. I've once done a test because I needed to download Real Player
for Nokia and I managed to download 300+KB through Kannel and then it
hitted the PANIC button, so how can Robert just download 143K and me 
and
Igor do 300+KB ?

As something changed in the mean time, related to the packet size ? I
recall of using a clean daily cvs at the time, but it was several
monthes
ago...

Problem with WAP-Gateway/File sizes

[Robert Hassing]

Hi All,

I have this problem with the WAP gateway I did setup.

The problem is that a maximum of 254/255 packets can be send concerning 1
file.
This means that if I want to download a file with a size higher as 143KB the
transmission fails :-(

The error I got is the following:

In wapbox.log:
PANIC: gwlib/octstr.c:1677: octstr_set_bits: Assertion `value <= mask'
failed.

And in bearerbox.log:
2003-11-19 16:13:55 [7] ERROR: Couldn't send UDP packet
2003-11-19 16:13:55 [7] ERROR: System error 90: Message too long
2003-11-19 16:13:55 [7] ERROR: WDP/UDP: could not send UDP datagram
2003-11-19 16:14:05 [7] ERROR: Couldn't send UDP packet

Is there a possibility to download files which are bigger as appr. 143KB

With kind regards,

Robert Hassing
[EMAIL PROTECTED]

RE: kannel WAP gateway and Siemens S55 - SOLVED!

[Navjot Singh]

have you seen the control.html in contrib directory of kannel download.
may that's what you are looking for.

Navjot Singh

|-Original Message-
|From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
|Odhiambo Washington
|Sent: Wednesday, September 10, 2003 9:08 PM
|To: [EMAIL PROTECTED]
|Subject: Re: kannel WAP gateway and Siemens S55 - SOLVED!
|
|
|* Wash <[EMAIL PROTECTED]> [20030909 08:39]: wrote:
|>
|> Dear Ladies and Gentlemen,
|>
|> I have setup kannel-1.2.1 as a WAP gateway and it seems to work
|fine so far.
|> However I have found a big problem with Siemens S55 phone. It cannot work
|> with the gateway, even though other phones do.
|>
|> It is in this regard that I would like to request anyone who has specific
|> information about this phone model to help me out. I just can't
|see the reason
|> why it fails to use kannel as gw when other phones do.
|
|I solved the problem by simply installing 1.3.1. Perhaps there is a bug in
|1.2.1 that stopped this.
|
|Could someone kindly show me a howto on SMS sending. I am interested in the
|setup of a web frontend to send SMSes.
|
|Thank you.
|
|
|
|
|Best regards,
|Odhiambo Washington
|Wananchi Online Ltd.
|
|
|
|___W_A_N_A_N_C_H_I__O_N_L_I_N_E__L_T_D___The People's Choice__
|Wananchi Head Office|*| Tel: +254 2 313 985-9
|1st Flr Loita, Loita St.|*| Fax: +254 2 313 922
|10286-GPO, NAIROBI, KE  |*| e-mail: 
|--
|
|If Microsoft would build a car...
|... Occasionally your car would die on the freeway for no reason. You
|would have to pull over to the side of the road, close all of the car
|windows, shut it off, restart it, and reopen the windows before you
|could continue. For some reason you would simply accept this.
|
|
|
|

RE: kannel WAP gateway and Siemens S55 - SOLVED!

[Rene Kluwen]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

I have the same problem with an SL45i, using the CVS version.
Quit annoying...

- -Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Odhiambo Washington
Sent: woensdag 10 september 2003 17:38
To: [EMAIL PROTECTED]
Subject: Re: kannel WAP gateway and Siemens S55 - SOLVED!


* Wash <[EMAIL PROTECTED]> [20030909 08:39]: wrote:
>
> Dear Ladies and Gentlemen,
>
> I have setup kannel-1.2.1 as a WAP gateway and it seems to work fine so
far.
> However I have found a big problem with Siemens S55 phone. It cannot work
> with the gateway, even though other phones do.
>
> It is in this regard that I would like to request anyone who has specific
> information about this phone model to help me out. I just can't see the
reason
> why it fails to use kannel as gw when other phones do.

I solved the problem by simply installing 1.3.1. Perhaps there is a bug in
1.2.1 that stopped this.

Could someone kindly show me a howto on SMS sending. I am interested in the
setup of a web frontend to send SMSes.

Thank you.




Best regards,
Odhiambo Washington
Wananchi Online Ltd.



___W_A_N_A_N_C_H_I__O_N_L_I_N_E__L_T_D___The People's Choice__
Wananchi Head Office|*| Tel: +254 2 313 985-9
1st Flr Loita, Loita St.|*| Fax: +254 2 313 922
10286-GPO, NAIROBI, KE  |*| e-mail: 
- --

If Microsoft would build a car...
... Occasionally your car would die on the freeway for no reason. You
would have to pull over to the side of the road, close all of the car
windows, shut it off, restart it, and reopen the windows before you
could continue. For some reason you would simply accept this.


-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.6 (MingW32)

iD8DBQE/ZiKt4zfyqeBw6xURAujaAJ9EGeBHsfqNAkO2v/mW99dr0Zd6TwCcCXp6
4NWLrxQ/oq5urGi/UYuRZ3U=
=EjAk
-END PGP SIGNATURE-

Re: kannel WAP gateway

[Frederik Dannemare]

Drew wrote:
On Thu, 11 Sep 2003, Frederik Dannemare wrote:

you could also install html2wml. this handy tools can convert a html file to a
wml file.
Pardon what is probably a clueless question, but I was just thinking about
this and saw your message.  Is it possible to plug html2wml into kannel to
convert HTML-only sites in wml?  I installed kannel a couple nights ago
and saw from the logs that it was choking on HTML content.
if you want to have html pages auto-converted (upon request) into wml pages, 
you might want to try using html2wml as a CGI from your web server.

From the man page:

README(1)  "Html2Wml Documentation"  README(1)

NAME
   Html2Wml -- Program that can convert HTML pages to WML pages
SYNOPSIS
   Html2Wml can be used as either a shell command:
 $ html2wml file.html

   or as a CGI:

 /cgi-bin/html2wml.cgi?url=/index.html

B/R,
Frederik Dannemare

Re: kannel WAP gateway

[Frederik Dannemare]

[EMAIL PROTECTED] wrote:
Hi,

I have configure and working kannel 1.3. It seems to work fine. But I need
to configure a home page.
Does anyone knows how to do this?

Thank You.
if you want to serve wml pages for your cell phone, you could...

1) install apache

2) add these lines to its conf and restart apache:
AddType text/vnd.wap.wml .wml
AddType image/vnd.wap.wbmp .wbmp
AddType application/vnd.wap.wmlc .wmlc
AddType text/vnd.wap.wmlscript .wmls
AddType application/vnd.wap.wmlscriptc .wmlsc
3) create test.wml:

http://www.wapforum.org/DTD/wml12.dtd";>
 Testing Apache WAP/WML support.
 


now try accessing this wml file with your cell phone...

you could also install html2wml. this handy tools can convert a html file to a 
wml file.

B/R,
Frederik Dannemare