Re: [AFMUG] OSPF - How large can a flat network grow?

Gino would probably be your best source for advice as I'll bet he has one of the largest networks of similar construction. I think he went MPLS to deal with a variety of issues he was having, including OSPF. But maybe Gino can speak up on the issue. Typically, if you didn't want to do anything else

Re: [AFMUG] Rohn 25

First, I would think Rohn would have a legitimate "3rd party" interest in your citation. I would definitely see if they would like to be involved. I think you can still be contrite and interested in correcting your procedures while searching for the truth and the right way to do things. Probably ho

Re: [AFMUG] tower assembly in Northern WI

o:* af@afmug.com >> *Subject:* Re: [AFMUG] tower assembly in Northern WI >> >> Darn, ( using polite word ) I have friends that would stack again and sit >> by, armed, just looking for the opportunity to "discuss"... That pissed >> off about private propert

Re: [AFMUG] tower assembly in Northern WI

would over that. > > > > On 5/30/2018 3:57 PM, Robert wrote: > > Darn, ( using polite word ) I have friends that would stack again and sit > by, armed, just looking for the opportunity to "discuss"... That pissed > off about private property trespassing out here in

Re: [AFMUG] tower assembly in Northern WI

I think it was Wisconsin in winter where we stacked a 485 foot tower. Next day we came to the site to finish cleanup and it had been cut down. They were kind enough to leave a sign on the fence as to which union local we should contact if we wanted to build it again. Thugs. The moral of the story,

Re: [AFMUG] OT PSAP callworx

You are on the right track. The vast majority of the time when you get "crosstalk" on a voip system it has to do with a call put on park or hold. most transfers happen by placing a call on hold. Make a note of the call details like to, from, and exact times for all involved calls. You should then b

Re: [AFMUG] spectrum customer calls me to fix their DVR

Except there is a never ending stream of those people. You would have to hire an entire fleet of people to help them and I'm pretty sure your thanks would be that they would only remember you when their crap breaks again. On Mon, May 21, 2018, 11:04 PM Steve Jones wrote: > You should have polite

[AFMUG] CAT6 qualifier/tester

I find myself needing another CAT6 test kit. I really don't need fiber but that would be a bonus. The primary use case is to verify structured cable for our VoIP service. I have looked at the below testers and find them to all have some benefits and drawbacks as usual.. I was wondering if anyone in

Re: [AFMUG] OT f**king microsoft

It also completely trashes RDP. I had to replace the new RDP exe and DLL files with older versions to get my programs to work. On Sat, May 19, 2018 at 9:45 AM Chuck McCown wrote: > File Stream sucks. Tried it. > Backup N Sync is not going away. But the conventional google drive will. > You hav

Re: [AFMUG] Any Aviat Eclipse experts near Midland, Texas area?

I know a guy in Midland who's company has two tower crews. I know they do microwave but I have no idea what their expertise is like. Most of those guys have to have their hand held by a real tech. I can give him a call if you like. On Wed, May 16, 2018 at 11:13 AM Jaime Solorza wrote: > Capacity

Re: [AFMUG] US20120176608A1 - System and method for antenna alignment - Google Patents

Yea, I hear that guy is real smart. On Tue, May 1, 2018 at 9:40 PM Jaime Solorza wrote: > I was researching something else and this showed, James Charles McCown > > > https://patents.google.com/patent/US20120176608A1/en > Jaime Solorza >

Re: [AFMUG] OT Moviepass

Probably Tecate. Oh Wait. That's Jaime. I may have to cancel my movie pass. Still a decent deal but A couple of theaters have upgraded their seats, but not their pricing, and those theaters are now off the list of what we can see. On Wed, May 2, 2018 at 5:56 AM Adam Moffett wrote: > Is this moti

Re: [AFMUG] OT: Rural depopulation

We have many small towns out here and without some kind of highway traffic many towns less than 3000 seem to have a huge amount of trouble. If you don't have enough pops to keep a Redbox running that is probably a good indicator. Adam is right though, just because you don't want to work 16 hours a

Re: [AFMUG] Provider billing

;https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > > On Sat, Apr 28, 2018 at 10:38 PM, Lewis Bergman > wrote: > >> I don't understand how charging a made up fee like the "carrier recovery >> fee" as you state

Re: [AFMUG] OT: Chinese Robo calls

gt; bp > > > > On 4/30/2018 9:39 AM, Dave wrote: > > Why dont we setup a scam center to scam the scammer LOL! > Just a thought > > > On 04/30/2018 11:31 AM, Lewis Bergman wrote: > > Maybe that is a division of the Chinese government looking to offset > currency

Re: [AFMUG] OT: Chinese Robo calls

Maybe that is a division of the Chinese government looking to offset currency manipulation losses. On Mon, Apr 30, 2018 at 8:30 AM Eric Kuhnke wrote: > It is hitting the 604/778 area codes (Vancouver) pretty thoroughly. Once > they get a live Mandarin or Cantonese speaking person on the phone th

Re: [AFMUG] Provider billing

I don't understand how charging a made up fee like the "carrier recovery fee" as you state it is legal. They are charging that "below the line" and not taxing it. I think I would take that up with them, find out what it is for, and why it is exempt from your state taxes. With a bill like that I am

Re: [AFMUG] Timer for 12v DC

Check it the timer.shop they have tons of this stuff. On Fri, Apr 27, 2018, 6:47 PM Jon Lee wrote: > Might need a second HD relay but this would work http://a.co/93rnS3u > > -Jon > > On Fri, Apr 27, 2018 at 10:48 AM, Darin Steffl > wrote: > >> Hello. >> >> We have a timer for DC power in our va

Re: [AFMUG] OT Google News

Submitresistance is futile. On Wed, Apr 18, 2018 at 9:44 PM Steve Jones wrote: > they took away my filters > you used to be able to do that > that was one of my filters > i hate google trying to control me > > On Wed, Apr 18, 2018 at 9:20 PM, Bill Prince wrote: > >> I would pay to have that

Re: [AFMUG] OT One for the borg

I own a small storage business called 277 Storage . First I would say, there is storage business software that wraps this all up for you. For something of that scale, I would think the ROI of that software is prohibitive, but likely less so than doing it yourself with what I

Re: [AFMUG] OT: very OT. Scumbag parents

I think Meth answers all your "why" questions. Since I deal with almost every sheriff in and most every drug focused law enforcement I hear a lot of their stories. One of them tells me that 95%+ of crime is drug related. CPS type problems they put at about 80% with the remaining 15% made of of perv

Re: [AFMUG] MTC Outdoor 8 Circuit SS

pluggable On Sat, Apr 14, 2018 at 7:27 PM Chuck McCown wrote: > U. yea... yes yes indeed I am twas the plan along yes > indeedy! > > Did I ever tell you about my girlfriend Morgan Fairchild? > > Thanks for the idea. Just have to figure out which connectors to use for > the

Re: [AFMUG] OT asterisk

What carrier are you using? Some carriers try to get out of the media path and hand the endpoint IP's off to each side. Depending on how your system is configured and what IP is handed during the ReInvite it can cause one way audio. On Wed, Apr 11, 2018 at 10:17 PM Josh Luthman wrote: > Between

Re: [AFMUG] OT Interesting OTA box

Do they have a new one with DVR as well? I am about to ditch my basic cable in favor of OTA combined with DirectTVNow, Netflix, And Amazon Prime. Any others out there proved to be worth something? On Tue, Apr 10, 2018 at 12:16 PM Chuck McCown wrote: > I use the roamio. I purchased it. > > *From

Re: [AFMUG] OT SIP issue

When all else fails, try tcp instead of udp. On Sun, Apr 8, 2018, 5:39 PM Faisal Imtiaz wrote: > Sorry.. saw that was already asked. > > Another item that will break audio is if there is a codec mis-match or > codec is not enabled ... > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom >

Re: [AFMUG] Little DC Connector

Phoenix contact pluggable terminal block On Sun, Apr 8, 2018, 7:13 PM Rhys Cuff (Latrobe I.T) wrote: > Is that the same thing as on a PacketFlux site monitor? > > > > > > > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Mike Hammett > *Sent:* Monday, April 9, 2018 9:12 AM > *To:*

Re: [AFMUG] usage based billing

use freeside for our billing CRM. > > Thanks > Dave > > > > On 04/04/2018 11:32 AM, Lewis Bergman wrote: > > Well, Are you taking about what to use for billing? There are a few that > require edge boxes to monitor traffic. You could use RADIUS. We used to use > th

Re: [AFMUG] usage based billing

Well, Are you taking about what to use for billing? There are a few that require edge boxes to monitor traffic. You could use RADIUS. We used to use that. Takes a bit to get it correct but MT supports sending periodic updates with byte counters to track usage. Your billing platform would have to su

Re: [AFMUG] Rohn 25 on metal building

>>> recommended ? "how low can i go?" (without making any safety issues, this >>> tower will only have 4 sectors and a 2ft dish at 40ft). >>> >>> Thanks, >>> >>> TJ >>> >>> On Sun, Mar 25, 2018 at 3:32 AM, Lewis Bergma

Re: [AFMUG] OT My son Frank

That is quite the teaser On Tue, Mar 27, 2018, 8:40 PM Chuck McCown wrote: >

Re: [AFMUG] Linksys

I am not a big Warren Buffet fan be he had a pretty nice explanation about what happens when a nation sells off its assets to another country. Just more of a trend of Chinese "companies", as if there were such a thing, buying up all over the world. On Tue, Mar 27, 2018, 12:09 AM Jason McKemie < j

Re: [AFMUG] Rohn 25 on metal building

I would tell you that you are waisting money. 2 sections are going to cost you a lot less and be a better long term solution than mounting a tower on a building. You can use a house bracket near the top depending on your building design and start your guy calculations from that point. On Tue, Mar

Re: [AFMUG] Serverplus

I would say that if you want local pronunciations of words you should run your open tech support. I don't think most people care. They are normally happy just to have someone speak English that they can understand. Until you get about 8000 subs I doubt you can do it anywhere close to the cost that

Re: [AFMUG] How far from a tower is safe?

Yes. Stand up wind. If guyed, stand 2/3 of the way out of the guy length. If not 20 percent of the tower height on up wind side. Of course I just made all that up. I usually like to stand next to something I can jump under, like my truck or trailer. On Wed, Mar 14, 2018, 10:25 AM Jay Weekley wro

Re: [AFMUG] test

What are you testing? On Wed, Mar 14, 2018, 5:58 AM Paul McCall wrote: >

Re: [AFMUG] OT: Amtrak

They definitely have better trains. We definitely have a better highway system. The last century rewarded the US for that with the words best economy. Not sure it will in this one. It almost seems like we built a tool to get addicted to so now we can't kick the habit of everyone having a car. On F

Re: [AFMUG] Introduction

I thought that was it but it had been so long I want sure. On Sat, Mar 3, 2018, 3:41 PM Jon Lee wrote: > SRB - Service Record Book >

Re: [AFMUG] anyone seen this letter yet

I am not sure why a response is even warranted. I don't feel obligated to respond unless I get a notice with a squiggly line down the left side. If you did want to respond to something so rediculous I would just call, not sure the effort of writing is warranted. On Sat, Mar 3, 2018, 10:03 AM Jay

Re: [AFMUG] Introduction

Excuse my ignorance or perhaps, forgetfulness. SRB? On Fri, Mar 2, 2018, 10:26 PM Jon Lee wrote: > Thanks for the Welcome. > > Lewis, that's an impressive SRB! In and out of the Corps. > >

Re: [AFMUG] Question for the Kopacetic Kool Kat Group

~$500 per link the way I do it but Probably more than $1500 the way you do it. I run the path, export to Google Earth, then if any point is less than 50' from the ground I'll go look at those points if I don't know the area really well. On Fri, Mar 2, 2018 at 5:50 PM Jaime Solorza wrote: > How m

Re: [AFMUG] Introduction

Being a Jarhead as well, nobody stupid enough to sign up with the Marines is smart enough to run a WISP. Give up now while you still have money. Oh...wait, you were air wing. Never mind. On Thu, Mar 1, 2018 at 9:44 PM Jon Lee wrote: > Evening all, > > I have been lurking in the shadows for the p

Re: [AFMUG] [OT] outbound ACH

We do this with Wells Fargo and one small Local bank with only two branches. The local bank waived all fees. WF charges but I don't remember it being outlandish. On Fri, Mar 2, 2018 at 1:16 AM Forrest Christian (List Account) < li...@packetflux.com> wrote: > I on a somewhat regular basis (several

Re: [AFMUG] OT google file stream

We were notified by Google that drive would be disabled in some way but I can't remember how. On Thu, Mar 1, 2018, 5:13 PM Nate Burke wrote: > I have not changed to file stream, but I'm reading this as it will only go > on the C: drive and you can't change it. So if you have a small C drive, >

Re: [AFMUG] FCC license?

No permit but there are taxes, reporting, and filling you have to do. On Wed, Feb 28, 2018, 12:58 AM David Thake wrote: > Hi Guys, > > Do you know if we need any special FCC permit to sell SIP services to a US > based ISP? > > We are based in Malta in the EU. > > Thanks > > > David Thake > www.v

Re: [AFMUG] Help I got abducted!!

Damn Jaimie, look that that messy loop. On Mon, Feb 26, 2018, 8:47 PM Jaime Solorza wrote: > > > Jaime Solorza > > On Feb 26, 2018 5:37 PM, "Jaime Solorza" > wrote: > >> That probe will be connected here on lower left side of back >> panel...about to test continuity and megg the wires. >> >> Ja

Re: [AFMUG] OT VPN over PPPOE

I think I would tell him to did off. Try getting a credit from quest, att, Verizon, etc. Of course I have had some drinks On Mon, Feb 26, 2018, 4:06 PM Chuck McCown wrote: > Had a customer that works from home. Could not make his VPN work. > We thought perhaps it was a port issue. Opened the p

Re: [AFMUG] The Moon is getting a 4G network next year

Flew all the way to San Diego and they serve Mexican at the conference. Why does everyone think they can do Mexican? On Tue, Feb 27, 2018, 5:49 PM Jaime Solorza wrote: > My snack to be enjoyed with Tecate... jalapenos, white onion, white cheese > and potatoes little butter and pinch of salt.

Re: [AFMUG] Question for the collective...

t; Jaime Solorza > > > > On Feb 23, 2018 9:56 AM, "Dave" wrote: > > Bang it out with PTP820C ring > Most of the switching is now for doing such a thing is built right into > the ODU if you go all outdoor. > They do make a split unit or an all indoor unit as wel

Re: [AFMUG] Email Server

Maybe some kind of interpreted pressure. We stopped providing it at some point and just had our installers suggest one of the free services and I can't remember anyone ever having an issue with that. But in the end to each his own. I just never saw that it did anything but cost me money. Very tiny

Re: [AFMUG] Question for the collective...

gt; They do make a split unit or an all indoor unit as well. >> >> >> >> On 02/23/2018 10:30 AM, Jaime Solorza wrote: >> >> That is what I was thinking...4 P2P links and tie them in at office...I >> wonder if you could colocate 4 11GHz links successfully? &

Re: [AFMUG] Question for the collective...

If budget isn't a problem, I would put up P2P to every location in a ring topology. A little routing or switch magic (your preference) and you have a redundant setup. On Fri, Feb 23, 2018 at 10:03 AM Jeremy wrote: > I would assume that you can add a fourth location... > > On Fri, Feb 23, 2018 at

Re: [AFMUG] Email Server

erswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > -- > *From: *"Lewis Bergman" > *To: *af@afmug.com > *Sent: *Friday, February 23, 2018 7:42:12 AM >

Re: [AFMUG] OT Raspberry PI

Every Rubidium GPS timing piece of gear I have ever seen outputs 10MHz. Every device that I have ever seen that takes a timing signal requires 10MHz. I probably have lead a sheltered life but I haven't seen anything else. On Fri, Feb 23, 2018 at 12:06 AM Robert wrote: > https://en.wikipedia.org/

Re: [AFMUG] Email Server

Never do your own mail if you don't already do it. Maybe everyone here doing it has found some magic solution but I doubt it. As discussed n this thread, the users get in the way no matter what your efforts. I am cynical, but I doubt anyone here is charging enough to make up for even the support co

Re: [AFMUG] OT Raspberry PI

They aren't cheap but you could always use an fpga. On Thu, Feb 22, 2018, 7:35 PM Chuck McCown wrote: > No, I saw it, but I already had the Pi so I ignored it and hoped for the > best. > I tried it first with arduino. Just not enough speed. And it had the > jitter problem too. > > I have a met

Re: [AFMUG] LC to FC Fiber Optic Adapter - Any experience?

Maybe some matching jell would hello let the connector loss. On Thu, Feb 22, 2018, 7:05 PM Faisal Imtiaz wrote: > > You will be fine with the connector.. > > BTW, to put you at ease, those adapters are normally used on Light Meters > ... :) > I have them, and use them with the light meter. > > R

Re: [AFMUG] OT Raspberry PI

Pi is not that fast when you talk about the gpio. While trying to measure some ac signals i was amazed i could only measure 4 inputs and still get a resolution of .5 amps on each one. On Thu, Feb 22, 2018, 6:59 PM Seth Mattinen wrote: > On 2/22/18 3:36 PM, ch...@wbmfg.com wrote: > > Had the comm

Re: [AFMUG] Tool vest

https://www.duluthtrading.com/store/product/64612.aspx?ev3=recommended_product I don't know jack about the product but I like the commercials. On Thu, Feb 22, 2018 at 2:46 PM Steve Jones wrote: > Over the years as our techs left i told the boss not to hire, we dont have > enough work, theyre laz

Re: [AFMUG] Email Server

I tried the same thing. I thought nobody would pay that much. I found they would happily do it. I kept raising it. They finally started fleeing when i required $20 a month paid annually. On Tue, Feb 20, 2018, 7:22 PM Steve Jones wrote: > We went to rackspace, never turned back, we are ona na ine

[AFMUG] Genset. Maybe a good deal, maybe not

https://m.newegg.com/products/9SIA08C6V29837?utm_medium=Email&utm_source=MP021818&cm_mmc=EMC-MP021818-_-EMC-021818-Index-_-index-_-9SIA08C6V29837

Re: [AFMUG] To good to be true... it was..

It would be more useful to know what brand and source you bought from. On Sun, Feb 18, 2018, 10:12 AM Robert wrote: > Could be phoning home, but now I've got s/w trying to phone into my DNS > servers... > > On 2/18/18 8:04 AM, Chuck McCown wrote: > > You sure it is not just the camera phoning ho

Re: [AFMUG] Fixing fiberglass ladders

It seems that those are never the same after there dropped hard. I've had to throw a few away just because they got really frustrating to work. Once the metal parts get just a tiny bit bent they don't stand right, fold correctly, etc. I can't imagine being able to straighten all the little metal pa

Re: [AFMUG] OT Moviepass dying?

It seems doomed to failure to me, but I still plan on using it until then. On Fri, Feb 16, 2018 at 7:41 AM Robert wrote: > All of moviepass's money generation methods are based upon somebody else > taking less money, no where do they inject more cash into the stream > except for the sole case of

Re: [AFMUG] Spam from Chuck

He didn't tell you it is in his underground coffin. On Tue, Feb 13, 2018, 6:30 PM wrote: > Got a guest room waiting for you. > > *From:* Jaime Solorza > *Sent:* Tuesday, February 13, 2018 5:21 PM > *To:* Animal Farm > *Subject:* Re: [AFMUG] Spam from Chuck > Maybe this summer I might drive up to

Re: [AFMUG] How to test your license protection?

I can speak to the fact that Commscope does watch your license and if something is truly going to interfere they will file an objection on your behalf. They will alert you by email that they have have filled and ask for further guidance. If you want to object or allow them to build out. I don't kno

Re: [AFMUG] OT Hello World

rduino > barely makes it but with too much jitter. Pi is not that much more money > and way faster. > > *From:* Lewis Bergman > *Sent:* Friday, February 9, 2018 8:16 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] OT Hello World > I don't know what you are trying to do

Re: [AFMUG] OT Hello World

I don't know what you are trying to do with the Raspberry Pi but maybe it isn't the right tool. I love it, it just isn't for everything. The Arduino or ESP32 is better for analog anything and usually sensors. I would also tell you that you may want to look at using Python with the Pi. Tons of libra

Re: [AFMUG] OT: Name that connector

Generically, it is called a screw type pluggable if I remember right. Most of the time I see them with one side soldered to a PCB so I don't know how easy they are going to be to find in another format. Phoenix contact is the one that seems to make more of them than anyone. You could go to Digikey

Re: [AFMUG] Some ideas for your WiFi configuration

Somebody had to much time and virtual APs On Tue, Feb 6, 2018, 10:11 PM Jaime Solorza wrote: > Friend shared this with me > > > Jaime Solorza >

Re: [AFMUG] Is this a good time to get in Bitcoin ?????

I'm with you. I would rather put it in my own business. If I am going to gamble I'll go to Vegas. On Tue, Feb 6, 2018, 11:14 AM Andreas Wiatowski wrote: > Everything is too volatile…. Unless you have money to burn or are a > gambling person, probably better to bet on your own business. > > > > C

Re: [AFMUG] Where to buy fiber optic patch cords etc.

I have a 4u 19 inch rack mount I'll sell you real cheap. On Mon, Feb 5, 2018, 11:18 PM Steve Jones wrote: > i got these https://www.fs.com/products/42459.html > way cheaper, with the deal i made buying the cutom length fiber from out > splicer guy (his job stole product) I paid less on the splic

Re: [AFMUG] Ot: Dow futures

The wonders of computerized trading. When every single stock moves in either direction humans aren't making those decisions. On Tue, Feb 6, 2018, 12:07 AM Steve Jones wrote: > crazy, in the last year, it shot up more than in the entire prior 8 years. > I wish I was one of those guys who know how

Re: [AFMUG] OT: Movie Review (moviepass)

The big issue with Dnkirk is it is exactly like watching the same 15 minute movie from 12 different seats. On Mon, Feb 5, 2018 at 11:12 AM CBB - Jay Fuller wrote: > > wife suggested we go watch dunkirk as it returned to theatres in > huntsville but we never made it back up there > > > - Orig

Re: [AFMUG] OT: Movie Review (moviepass)

I try to go 3 times a week. On Mon, Feb 5, 2018, 12:37 AM CBB - Jay Fuller wrote: > > Its been cold and rainy...lol > > Sent from my Verizon 4G LTE Smartphone > > - Reply message - > From: "Josh Reynolds" > To: > Subject: [AFMUG] OT: Movie Review (moviepass) > Date: Mon, Feb 5, 2018 12

Re: [AFMUG] OOBE mikrotik

It won't fit every situation but if you only need occasional access and can work within the framework there isn't a less expensive way to do it. We use it in a few different scenarios and have a few more planned. We have a demo setup of VoIP phones we use one on, It gets used a few times a month an

Re: [AFMUG] Dc plant conversion

Which is why everyone used the RSD. I had to learn that lesson as well. On Wed, Jan 31, 2018, 7:53 PM Josh Baird wrote: > My problem with them (SD) was that a current in-rush would trip them, and > the only way to get them to work again was to power cycle them. Not fun. > > On Wed, Jan 31, 2018

Re: [AFMUG] OOBE mikrotik

Hologram is 40 cents. On Wed, Jan 31, 2018, 8:19 PM Sean Heskett wrote: > Interesting...I didn’t know there were plans for $2/mo. That definitely > makes it worthwhile to have a backdoor LTE connection to towers. > > I’ll have to check into that > > On Wed, Jan 31, 2018 at 1:30 PM TJ Trout wro

Re: [AFMUG] OOBE mikrotik

NAT, how do i login to >> a device behind nat when I cannot force the carrier to give me a port >> forward? >> > On Wed, Jan 31, 2018 at 4:16 PM, Lewis Bergman >> wrote: >> > Hologram network and set up their site to do it for you. Pretty slick. I >>> als

Re: [AFMUG] OOBE mikrotik

Hologram network and set up their site to do it for you. Pretty slick. I also like that is really cheap if you don't use it. As a warning, don't let the MT put a default route in for it or you will pay huge if your primary goes down. Otherwise it is so close to free it is crazy. On Wed, Jan 31, 20

Re: [AFMUG] Cellular One approach to WISP

I am might be wrong, but I don't see many of those working out. Who fronts the money for the drop in the bucket national ad campaign? National brand awareness doesn't just happen. Same for buying equipment. Who runs the warehouse, do you pay upfront for the equipment? How long do you have to wait f

Re: [AFMUG] Ford Transit Connect versus E150

8 7:59 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Ford Transit Connect versus E150 > > > > I have been running them for about 4 years without issues. > > > > *From:* Lewis Bergman > > *Sent:* Tuesday, January 30, 2018 1:48 AM > > *To:* af@afmug.com &g

Re: [AFMUG] Cellular One approach to WISP

I thought that is what JAB/Rise was doing. On Tue, Jan 30, 2018 at 9:11 AM Timothy Steele wrote: > What do you mean? Cellular one is known as the worst company alive > everywhere I've been > > On Tue, Jan 30, 2018, 9:57 AM Gino A. Villarini wrote: > >> Hey Guys >> >> Those who know the history

Re: [AFMUG] Vehicle Lease

Maintenance. I have three locations. Only one of them has anyone that can discern Motor Oil from Olive Oil. I did it primarily because Enterprise Fleet Services has about 75 ASE mechanics in a call center that shops have to gain approval from to get paid to do work. I was getting drilled every time

Re: [AFMUG] Ford Transit Connect versus E150

I had one and got rid of it after 50,000 miles. It just wouldn't go where we needed it. It was very small compared to any regular sized van. I lease my feet from Enterprise and they have millions of vehicles in thier fleet. My account manager told me they are seeing failures with transmissions at a

Re: [AFMUG] Crisco Oil Switch question

Brocade is very close to Cisco. I think some of the defaults are different so if things don't go as planned that is what I would check first. On Tue, Jan 30, 2018, 12:52 AM Dev wrote: > Not sure about Brocade, but Juniper JunOS is quite a bit different, the > hierarchy and structure is different

Re: [AFMUG] Smart Electric Submeter

WiPy from pycom or something similar. May a raspberry pi. Something like this https://www.hackster.io/ControlEverything/energy-monitoring-through-a-raspberry-pi-190a2a On Mon, Jan 29, 2018, 2:53 PM Steve Jones wrote: > if you run an APC its built in on the new management > > On Mon, Jan 29, 2018

Re: [AFMUG] moviepass now strong arming....

My experience is that you have to chat through the app to get decent response time. On Sun, Jan 28, 2018, 4:25 PM Chuck McCown wrote: > I originally went here: > > https://moviepass.zendesk.com/hc/en-us/signin?return_to=https%3A%2F%2Fmoviepass.zendesk.com%2Fhc%2Fen-us%2Frequests%2F1052931 > Got

Re: [AFMUG] OT lutron

Smartthings On Sun, Jan 28, 2018, 8:44 AM Timothy Steele wrote: > Why not just get a ELAN g1 to control your lutron and any other smart > device you have? A bit pricey but so much nicer in the end and a LOT less > work > > Control your lights, shades, music and TV's all in 1 spot > > On Sun, Ja

Re: [AFMUG] Dc plant conversion

Oh yeah, track makes them too I think but I never used those. On Sat, Jan 27, 2018, 9:55 AM Lewis Bergman wrote: > Phoenix and Meanwell both make good AC to DC power supplies that have > battery managers available with low voltage disconnects. They also have > temp monitors to pre

Re: [AFMUG] Dc plant conversion

Phoenix and Meanwell both make good AC to DC power supplies that have battery managers available with low voltage disconnects. They also have temp monitors to prevent over charging and dry contracts for alarm states. You pick the battery size and the and size of the power supply based on your load

Re: [AFMUG] Fw: Coming to a s*am folder near you

I need 3. How much and where do I send the money? On Mon, Jan 22, 2018 at 9:12 AM Chuck McCown wrote: > Thanks, took way to long to finish the project. At least now we can add > them to the catalog. > > *From:* Sean Heskett > *Sent:* Sunday, January 21, 2018 9:02 PM > *To:* af@afmug.com > *Subj

Re: [AFMUG] Fw: Coming to a s*am folder near you

Please let us know where and when they have real metal. On Sun, Jan 21, 2018, 8:27 PM Jaime Solorza wrote: > No problem getting them > > > Jaime Solorza > > On Jan 21, 2018 5:16 PM, "Chuck McCown" wrote: > >> And the other one >> >> *From:* Chuck McCown >> *Sent:* Sunday, January 21, 2018 5:12

Re: [AFMUG] OT MoviePass

check-in to work again. Have you had > trouble like that or can you go to a movie yesterday at 9pm and go again > today at 12pm for example, less than 24 hours between them? > > On Sat, Jan 20, 2018 at 9:35 AM, Lewis Bergman > wrote: > >> I went 3 days ago, yesterday, an

Re: [AFMUG] OT MoviePass

rice >> amount. >> >> hmm, that being said, i guess you could buy a ticket for "tomorrow" >> assuming the box office can sell you one for tomorrow. i'd probably try >> that first to test my theory using your own cash. >> >> >> > - O

Re: [AFMUG] Quick comparison between 80GHz and AF24

Out fog, or any other suspended water droplets. On Fri, Jan 19, 2018, 7:42 PM Mathew Howard wrote: > I'd guess 24ghz would be slightly better, but either one is going to drop > at that distance if you ever get heavy rain. > > Somebody from Siklu told me at one time, that some of their customers

Re: [AFMUG] OT MoviePass

I don't think so, but I haven't tried such a thing. "Invest" $10 and find out. On Fri, Jan 19, 2018 at 8:32 AM Cassidy B. Larson wrote: > Here’s a random question I had about this.. Can I buy my seat really early > for a premier, then go by the next day and the next to buy another seat as >

Re: [AFMUG] Decent Heat Map software

I know Anritsu has some uber cool stuff for that that you use two small transmitters included with the unit to calibrate the units dead reckoning and after that it is able to produce a 3D map of signal levels. I also think it was ~$45K or so. Cheaper and more labor intensiveExcel spreadsheet an

[AFMUG] OT Bitcoin

I haven't heard allot of Bitcoin bragging lately. What's going on?

Re: [AFMUG] It was a brisk day

Jaime likes hikvision. On Tue, Jan 16, 2018, 11:18 PM Robert wrote: > That's one of the ~$300 ones? I love them. Going to be setting up a > bunch! > > On 1/16/18 6:56 PM, Jaime Solorza wrote: > > Installed this PTZ Speed Dome IP camera at booster site in Fabens. It's > > online via Cradlepoi

Re: [AFMUG] OT Fun

OMG! that is hilarious! On Tue, Jan 16, 2018, 7:33 PM Chuck McCown wrote: > https://youtu.be/snk3C4m44SY >

  1   2   3   4   5   6   7   8   9   10   >