Hi Karen
Per the Master UC Specialization webpage, I believe it's already a
requirement.
HTTP://cisco.com/go/Masteruc
Regards
Sent from my Windows Phone
--
From: Karen Johnson
Sent: 12/1/2013 5:48 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] cci
Hi
I think your suggestion solved it, I will test it more thoroughly and will
keep you posted.
Thank you very much
Regards
S Wilson
Sent from my Windows Phone
--
From: Somphol Boonjing
Sent: 8/29/2013 3:03 AM
To: Sam Wilson
Cc: OSL
Subject: Re: [OSL | CCIE_Voice
Hi,
I have been trying to do some QoS lab and seems that I am missing some
basics here:
!
class-map match-any Voice-Sig
match ip dscp cs3
match ip dscp af31
class-map match-any Voice-RTP
match ip dscp ef
!
!
policy-map Voice-QoS
class Voice-Sig
set dscp cs3
class Voice-RTP
set dscp ef
You will have to either trust the dscp marking done by the switch or you
will have to mark them again.
Please post your router configs and may be we can get a bit more detailed
Hth
Sent from my Windows Phone
--
From: Alex Mendoza
Sent: 8/26/2013 10:54 PM
To: CCIE Stud
Sorry hit the enter too fast last time and sent you the reply.
Since you mention you are using laptop keyboard, that must be the issue as
to enter or type ^ you have to know the correct combination of the keys
unlike the most desktop keyboards
Hope that helps
Sent from my Windows Phone
-
Hi
Try entering "no service config" in the config mode, save the config and
reload the router
Hope that help,
Rwgards
Sent from my Windows Phone
--
From: Hesham Abdelkereem
Sent: 8/26/2013 1:05 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] ACS 2509
Oh feel the pain, brother.
Do you mind to share what section costed you the most.
Kind regards
Sam Wilson
On Thursday, January 31, 2013, Ben John wrote:
> Guys,
> i took my lab last week in SJ and i failed again that was my fourth
> attempt. i got everything working tested
Hi,
I have not sat in lab yet, so it's just a guess, and those have sat, may
fear the wrath of NDA god :(
I guess that we will have access to the Cisco.com/go/support
Anyone else want to chime in ?
Regards
On Saturday, January 26, 2013, Barrera, Hugo wrote:
> Greetings,
>
> ** **
>
> I j
Congratulations! You deserve it! Always appreciate your input
On Thu, Jan 24, 2013 at 5:18 PM, Cory Gray wrote:
> Some Questions I just got
>
>
>
> 1. Any tips on using configurations in notepad or direct typing into
> router without using tab.
>
>
>
> I create 4 notepads for every exam
Hi Guys,
I am so so so upsad this time was my last i believe but. cant blame
anyone except myself!!
I got new lab 6 in brusels it was all changed early offer, MGCP TS, ipcc
changed, i am nt sure how we can complete it in 8 hrs time.
I am really upsad now no mo
money for next attempt nt sure when i can go back
for this,
All the questions are comming in my eyes again and again but i was helpless
Best of luck guys who are going next ...
Regards
Sam
___
For more information regarding industry
h dialing 7, 10 and
11 Digits to call in North America.
Also the Lab questions will give exact dialing requirements and the
proctor should be able to clarify such things as well.
Sam
On Fri, Aug 19, 2011 at 9:30 AM, Ken Wyan wrote:
> Hi Marko,
>
> Thanks for reply.
>
> If bot
ou sit the lab. The
laptop, as well as Mac, keyboards either lack some important keys for
shortcuts or are located somewhere different than during your practices.
Your muscle memory will be thrown off - every little advantage helps,
right?
Sam.
On Thu, Jul 21, 2011 at 8:15 PM, Bill Lake wrote:
&g
Answering VMWare question.
If you can afford to, go Bare-metal VMWare ESXi.
Sam
On Thu, Jul 21, 2011 at 9:27 AM, indigoboy wrote:
> Last week, the Kingston's 4x 4gb were down to a record low $89 after
> rebate.
>
> It sold out after two days but I would expect memory price
Congratulations! You deserve it.
Thanks for sharing your experience
On Tue, Jul 19, 2011 at 1:24 PM, Romain wrote:
> Nice!
>
> Sent from my iPhone
>
> On Jul 19, 2011, at 11:49 AM, Cristobal Priego
> wrote:
>
> > hello guys,
> >
> > My 2 year journey just came to an end. I took my 3rd attempt
than
pay for it down the road.
Sam Park
On Fri, Jul 15, 2011 at 12:58 PM, Eliot Ngwa wrote:
> I've got my network devices for my home lab. Now, I'm just curious as to
> what kind of servers you all are using to run the CUCM, CUPS, UCCX, AND
> Connection apps on VMWare. I was th
ue out.
In older switches the p-q was able to be rate limited. Wonder if the lab
designers are using that assumption.
Again check my sanity on this test.
Thanks
Sam
___
For more information regarding industry leading CCIE Lab training, please
and the other way round.
Regards;
Sam
On Mon, Jun 27, 2011 at 12:56 PM, wrote:
> Hello All,
>
>
> When asked to configure NTP server for CUE as the HQ Router's loopback IP
> or HQ routers Voice Vlan IP,
> should i configure NTP master command on the HQ router besides
George;
No disagreement here.
I will definitely try it.
Regards;
Sam
On Wed, Jun 15, 2011 at 1:45 PM, George Goglidze wrote:
> Hi Sam,
>
> I do agree both will work, there's no reason why one would work and not the
> other.
> But in my opinion having two different num
Sure, it's not "best practice" but if someone is
familiar with IPX material, it is a "known good". and anyway, I recommended
that for his testing - not final config.
Cheers
Sam.
On Wed, Jun 15, 2011 at 10:41 AM, George Goglidze wrote:
> Hi Sam,
>
> The "k
ould try that,
again just to see that it all works, and there isn't some other issue.
Sam.
On Wed, Jun 15, 2011 at 9:02 AM, Adil Shaikh wrote:
> Hi SinGei,
>
> I do not have translation pattern in CM. You call flow is aboslutely
> correct. Just for clarity. I am adding fe
So Raj;
Just call the telco and say...
"I demand the full E164. By golly, I deserve all my digits. I'm paying for
my DID's.
And don't forget to send the "+" sign, too.
No prepending, for me, on my MGCP Gateway - I'll have you know.
If I don't see those digits in my ISDN q931 messages, I'll have
Catch on both in your translation rule.
voice translation-rule 10
rule 1 /^16662225...$/ /+\0/ type any international plan any isdn
rule 2 /^5...$/ /+1666222&/ type any international plan any isdn
You're other configs stay the same.
On Sat, Jun 11, 2011 at 3:18 PM, Chris Green wrote:
> Co
un 9 21:06:19.933: TFTP: Opened flash:ringlist.xml, fd 7, size 243 for
process 263
Jun 9 21:06:19.941: TFTP: Finished flash:ringlist.xml, time 00:00:00 for
process 263
Sam
On Thu, Jun 9, 2011 at 4:40 PM, cisco cisco wrote:
> Hi Sam,
>
> Curious to know what you did,could y
individual phones be looked at to see how TFTP's are configured?
Probably not, probably the configuration of the DHCP scopes are checked.
If it said that you only need 1 TFTP Server (for example: Pub), than make
that Server 2 and the router as server 1.
Regards;
Sam.
On Thu, Jun 9, 2011 at 10:45
IP Phone
This has the exact directory with numbers and formats you need, no need to
remember.
Cause, sometimes you panic and forget.
This page also has the RingList.xml for ring tones.
HTH
Sam
On Wed, Jun 8, 2011 at 3:09 PM, Extenok wrote:
> Hi,
>
> Another easier way is to go to the Cisco
rt on the HQ-RTR. When testing
and playing around you have make sure this is up.
Either that or enable ip routing on your switch and give your vlan
interfaces some ip address.
HTH
Sam.
On Thu, Jun 9, 2011 at 9:15 AM, Qq Ccie wrote:
> try to enable dhcp debugging and see what is happening
&g
idual phones to these services.
Don't delete the voicemail one. :)
I've already tested this.
Sam.
On Wed, Jun 8, 2011 at 1:46 PM, adam compton wrote:
> You can add services with BAT?
>
>
> On Wed, Jun 8, 2011 at 1:20 PM, wrote:
>
>> You have delete the enter
Congrats
On Wed, Jun 8, 2011 at 7:34 AM, Michael Miller wrote:
> Congrats on your success! Although I am not voice CCIE (yet!) I imagine
> that it was a tough test.
>
> Thanks,
>
> Michael Miller
> CCIE# 28901 (R&S)
>
> On Wed, Jun 8, 2011 at 11:36 AM, Moataz Mamdouh wrote:
>
>> Congrat
Did you get SIP MWI to work? I could not get it to work.
Also, I found that you don't need to add the ip route statement since it is
a network that ospf can see.
Sam.
On Thu, Jun 2, 2011 at 8:58 AM, adam compton wrote:
> Worked exactly like you said this morning. I know th
sorry typo on that last ip route statement.
ip route 10.10.240.2 255.255.255.255 interface Service-Engine1/0
Just finished testing it. Got website and voicemail.
Sam.
On Wed, Jun 1, 2011 at 11:31 PM, adam compton wrote:
> Interesting. I would think you would have to use a /30 subnet m
e Service-Engine1/0
ip address 10.10.240.3 255.255.255.254
service-module ip address 10.10..240.2 255.255.255.254
service-module ip default-gateway 10.10.240.3
ip route 10.10.240.3 255.255.255.255 interface Service-Engine1/0
Can I get my number now?
Sam
On Wed, Jun 1, 2011 at 9:23 PM, adam
If they are asking to move Queues, then I don't think it matters. I would
use the same threshold as the current queue.
So for your example move 2 and 4 to queue 4 threshold 3. Don't forget to do
the DSCP values to match.
Sam.
On Wed, Jun 1, 2011 at 8:44 PM, Adil Shaikh wrote:
>
rds.
Hope that helps.
Sam.
On Mon, May 30, 2011 at 10:35 PM, Abel ... wrote:
> There something we should know about the VWIC-2MFT-T1-DI, cause is a little
> cheaper than the normal one. Can we use the DI like the normal one? I was
> wondering about that some time ago.
>
> Thanks
&
the Ultimate Boot CD
(partitioning as well as other utilities).
So the hard thing might be getting a known good CF.
Sam.
On Tue, May 31, 2011 at 5:43 PM, ccieid1ot wrote:
> The mem is your ram, CF is your hd. Try the sandisk CF, I'm sure cisco
> just oem it from either sandisk
Do you guys have access to IPExpert website? All the router and switch
configs are there for you. For each lab / Initial configs
All you have to do is tweek them for your hardware setup.
Sam
On Wed, May 25, 2011 at 7:34 AM, Voiper wrote:
> Thanks Abel.
> Are you using 2 physical
Becareful will shutting down the Loopback 0, you might need it for BACD
while in SRST mode.
I have my own rack, so I use a NULL route
On BR1 or BR2
ip route 10.10.210.0 255.255.255.0 null 0
Forces failover of GW and phones and you don't have to shut down anything.
On Mon, May 23, 2011 at 1:51 A
So in those questions, what wording triggers you to use Application Dial
Rules?
Why can you just make your RD = +14087773434 and make a specific RP =\+1! to
go out the specific gw; like Randall has?
thanks:
Sam
On Sun, May 22, 2011 at 11:25 AM, Cristobal Priego <
cristobalpri...@gmail.
ickup Grps, etc, that reside in Partitions are all evaluated
together. So two exact matches can not exist within any given partition.
They can, however, exisit in different partitions. If this is the case, and
they are both in the same CSS, the tie breaker will be ordering within in
the CSS.
Sam
O
Congrats!
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Rogers Ochieng
> *Sent:* Friday, May 20, 2011 2:38 AM
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [NEWSENDER] - [OSL | CCIE_Voice] Passed CCIE#28970!!! -
> M
Great Job!
On Tue, May 17, 2011 at 11:27 AM, Adam Thompson wrote:
> My year a half long journey ended yesterday in RTP. I have finally obtained
> my voice CCIE #29829.
>
> I have been lurking for the better part of a year, and contributing when I
> had a chance, but benefit of this list has been
Install docs says to me that it is likely that it will
be on the exam.
"When you install the Engineering Special (ES) for Cisco Unity Connection,
the voicemail web service is also installed. You must configure the
voicemail web service in Cisco Unity Connection. "
Sam
On Mon, May 16, 20
>
>1.
>
>Allow the router to do domain lookups, define DNS server to send
>queries to and define default domain to append to domain lookups.
>
> ip domain lookup
>
> ip name-server 10.10.110.1 208.67.222.222
>
> ip domain name ccie.local
>
>
> HTH
Now, that's what I'm talking about!
I'll try to give it whirl in the next week or so.
BTW are you running this on HQ-RTR or PSTN-WAN
Thank you very much.
Sam
On Sat, May 7, 2011 at 5:13 PM, Bill Lake wrote:
> maybe this will work but you will have to adjust for your config.
7;s got it working, could you share the configs.
Thanks.
Sam
On Sat, May 7, 2011 at 4:00 PM, Bill Lake wrote:
> SUMMARY STEPS
>
> *1. **enable*
>
> *2. **configure* *terminal*
>
> *3. **ip dns server*
>
> *4. **ip name-server* *server-address1* [*server-address2 *...
Does anyone have a good setup for running DNS on the say the PSTN-WAN Router
for testing the VPIM?
I don't have VM space to run another Windows box and I don't care to try to
figure Windows DNS just yet.
Sam
On Sat, May 7, 2011 at 1:01 PM, Bill Lake wrote:
> I would contact cisc
Ahmed;
I believe that the PSTN-WAN gateway will not allow you to dial BR1 Site as a
local number - you debug shows 7 digits coming in for the called #.
Did you try sending the number so that 1-617-863-1002 comes into the T1?
BTW, why are you using 2 E1's on your setup?
Sam
On Sat, May 7,
Great Job!
Congrats!
Sam
On Wed, May 4, 2011 at 4:02 AM, Shrini wrote:
> Hi Experts,
>
> Today I am officially announced as Voice CCIE.
>
> Thanks to one and all for your valuable suggestions and help throughout
> this journey.
>
> Special thanks to Vik and IP Expe
Appreciate the link.
Here is another that I found helpful
http://docwiki.cisco.com/wiki/Cisco_IOS_Voice_Troubleshooting_and_Monitoring_--_H.323_Gatekeeper_Troubleshooting
So but those don't really give me a good idea what's up when something is
missing. Or weird.
Sam
On Wed, May 4,
George;
Cisco does have regular security announcements on their products that are
affected by vulnerabilities.
This is not the first for CUCM.
http://www.cisco.com/en/US/products/products_security_advisories_listing.html
Sam
On Thu, May 5, 2011 at 6:09 AM, George Goglidze wrote:
> Thanks
me no good without an explanation of
what it means or being able to validate it myself.
I know the IPExpert labs have some examples, but it doesn't cover all
possibilities.
Sam
On Wed, May 4, 2011 at 4:36 PM, Brian Mahler wrote:
> Try # debug ras
>
> The GK communicates vias
All;
I'm looking at the QoS section 5.2 of Lab3 from the OWLE class (for those of
you who took it and have the workbook)
And Vik if you read this, the IPExpert Solution guide you gave us does NOT
have the answer to this question.
Here is the scenario:
Ensure that all SCCP traffic passing through
On the WAN, to configure Class Based Shaping. (not needing to use Auto QoS)
Go to the QoS SRND pdf >> WAN Agg >> Frame Relay >> Slow Speed Links
This is good for CB shaping example and the FRF.12 LFI values.
Cheers;
S Park
On Thu, Apr 7, 2011 at 2:10 AM, Erwan Erwan wrote:
> hi all,
>
> could
are your friends, know them well.
Sam Park
"But I am that viazone!" The router is now aware.
On Fri, Mar 25, 2011 at 7:29 PM, Justin Brady wrote:
> I have a question about gatekeeper troubleshooting. Specifically around
> Remote GK’s. When using CUBE and not using CUBE,
hours (mostly rearranging my rack).
I don't think it's you.
Well, that's my experience.
Hope that helps. Hope you can get your hands on a better router.
Sam Park
On Fri, Feb 18, 2011 at 5:27 PM, Mark Reed wrote:
> Some additional information as I'm finding new things as I dig
one, but San Jose is just too far for me to drive (paying my own way and
I'm in Chicago, so I need to drive), and if they aren't going to hold any
more in Columbus then I'm not sure what I am going to do.
Anyone heard anything?
Sam
_
Congrats!!!
Sam Park -
On Jan 20, 2011 2:15 PM, "akash patel" wrote:
I took my exam in San Jose and just found that I passed it, # 27992
I like to thank you Vik, Amy and entire IPExpert support team as well as
everyone in this forum for outstanding help throughout my CCIE journey.
per the walk-through? Clarify what is meant by unused.
Vik & Amy, did not mean to call you out on these,
but I felt I couldn't just put "the instructor" in my explanations.
Thanks in advance.
Sam Park
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
This is like one of those instances when a person's mind is so fried that
only the basic primal pleas escape from a person's lips. In this case,
through the keyboard and into an e-mail.
Sam Park
On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror wrote:
> "Help".. pretty mu
Clients 0, B-ACD Clients 0
File Allegro.ulaw.wav type INVALID Media_Payload_G711Ulaw64k 160 bytes
Regards
Sam Wilson
On Tue, Apr 20, 2010 at 8:43 PM, Mad Kiwi wrote:
> Hi,
>
> Did you include in route statement in your your loopback interface?
>
> eg.. multicast 239.1.1.1 p
Hi,
We have a working MoH for one site and when I tried to use similar
configuration for a different site, it seems something went missing.
oprtr02#sh ccm-manager music-on-hold
Current active multicast sessions : 1
Multicast RTP port Packets Call CodecIncoming
Address
Hi,
Is there any "tweak" to implement Ext Mobility Inter Cluster environment on
CUCM 7.x? And would ver 8.x address this?
Regards
Sam Wilson
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi,
When we call 911 , how many ANI digits are required to be sent both in the
real world and the exam ?
Is it 10 or 7 digits.
Any help appreciated.
Thanks.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexp
Hi,
In lab 3 we created a Translation Pattern with urgent priority
checked..
I also created a Route pattern with 9.011! predot to call the PSTN.
When I dial 9011 international or national i get a error message 'your
call cannot be completed as dialed...' when I hit the 4th digit.
Howeve
Hi,
On page 64 of the proctor guide, we are told to globalize the calling number
for PSTN calls into HQ.
For local calls into HQ - 7 digit ANI,
Incoming Calling Party Subscriber Number Prefix is : +1212
When I call from the PSTN phone line 212-394-2123 to HQ PH 2 - 3945002 , I
see a +121221
65 matches
Mail list logo