Dear Gents,
I'm working on MVA scenario.
I've setup the scenario for MVA and SNR. SNR is working well. MVA is working
partially, meaning when I call the MVA number the system asking me for the pin
then 1 to make a call.
But when I pressed 1 and then the number # I heard only silence and then the
Hi,
I'm having issue on the MVA while calling from PSTN phone(act as mobile)
The setup is like below:
SiteC(PSTN#)-->SiteC_GW-->FR(WAN)-->SiteA-GW-->SiteA_UCM
The VXML configured on siteC gw bring me to the MVA service on UCM
and prompt for the PIN, no RDP prompted, as the calling no# matched the
Hi Miron / Kalyan ,
thanks for replying.
In phone config page , owner is set and it started working perfectly :)
Regards,
Mritunjay
On Thu, Jan 13, 2011 at 9:45 PM, Miron Kobelski wrote:
> hi,
>
> debug voip ccapi inout will give you the answer what's going on.
>
> regards
> kobel
>
> On Thu,
hi,
debug voip ccapi inout will give you the answer what's going on.
regards
kobel
On Thu, Jan 13, 2011 at 11:35, Mritunjay Kumar wrote:
> Hi All,
>
> MVA is not working.
>
> when call is made to MVA DID, IVR runs , SNR user is authenticated ,
> pressed one to make a outbound call , dialed num
Hi All,
MVA is not working.
when call is made to MVA DID, IVR runs , SNR user is authenticated , pressed
one to make a outbound call , dialed number is 9911#
Once done with dialed number , call is getting diconnect silently ..No re
order tone
SNR works
route pattern
9.911 (null partition)-
Dear experts,
Has anyone got Mobile Voice Access working with GNS3 hosting the H323 router
?
Regards,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi Prashant,
I'll try this scenario you just mention and i'll let you know :)
Best regards,
Amr Sherif
Date: Fri, 12 Nov 2010 11:26:30 -0500
Subject: Re: [OSL | CCIE_Voice] MVA Call Drops
From: prashantpatel...@gmail.com
To: miroale...@hotmail.com
CC: anil...@yahoo.com; cr
the HQ.
>>
>> Vik if you have any suggestion how to avoid this issue i'll be
>> appreciated.
>>
>>
>> Amr Sherif
>> Senior Network Voice Engineer
>> CCNA,CCNP,CCVP and CCIE Voice Written *(Certified)*
>> CCIE Voice Lab *(In Progress)*
&
ior Network Voice Engineer
> CCNA,CCNP,CCVP and CCIE Voice Written *(Certified)*
> CCIE Voice Lab *(In Progress)*
>
> ------
> Date: Thu, 11 Nov 2010 20:46:50 -0800
> From: anil...@yahoo.com
>
> Subject: Re: [OSL | CCIE_Voice] MVA Call Drops
> To:
bject: Re: [OSL | CCIE_Voice] MVA Call Drops
To: miroale...@hotmail.com; cristobalpri...@gmail.com
CC: ccie_voice@onlinestudylist.com
Also pls include this
voice service voip
allow connection h323 to h323
--- On Fri, 11/12/10, Cristobal Priego wrote:
From: Cristobal Priego
Subject: Re: [OSL |
Progress)
CEL: +966501462699
Email: miroale...@hotmail.com
Date: Thu, 11 Nov 2010 15:16:44 -0800
Subject: Re: [OSL | CCIE_Voice] MVA Call Drops
From: cristobalpri...@gmail.com
To: miroale...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Amr
I ran into this issue before
please try this
Also pls include this
voice service voip
allow connection h323 to h323
--- On Fri, 11/12/10, Cristobal Priego wrote:
From: Cristobal Priego
Subject: Re: [OSL | CCIE_Voice] MVA Call Drops
To: "Amr Sherif"
Cc: ccie_voice@onlinestudylist.com
Date: Friday, November 12, 2010, 4:46 A
Amr
I ran into this issue before
please try this
dial-peer voice 5999 pots
service ccm
incoming called-number 5999
dial-peer voice 5999 voip
service ccm
destination-pattern 5999
session target ipv4:192.168.15.100
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
that should do the t
Hi Experts,
I have this Scenario and wish you help me in it.
Trying to call MVA 2123945999 from pstn Line (2123942123) using hairpin method
here is the call flow:
PSTN Line (2123942123) --> calling 2123945999 --> HQ-GW(MGCP) -->Significant
number =4 & css-internal --->Route pattern (5999/
st.com] Im Auftrag von CCIE
Voice GMAIL
Gesendet: Samstag, 9. Oktober 2010 01:14
An: ccie_voice@onlinestudylist.com
Betreff: Re: [OSL | CCIE_Voice] MVA and MGCP
Bernhard,
It now just sunk in what you were getting at.
I do have a GK configured with the ip address that would be the same a
this?
Thanks,
Jeff
From: Stutz, Bernhard [mailto:st...@pandacom.de]
Sent: Friday, October 08, 2010 12:58 PM
To: CCIE Voice GMAIL; ccie_voice@onlinestudylist.com
Subject: AW: [OSL | CCIE_Voice] MVA and MGCP
Maybe you have a gatekeeper with that ip address configured?
Your mgcp should
;
>
>
> Hth,
>
> Bernhard
>
>
>
> Von: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag von CCIE Voice
> GMAIL
> Gesendet: Freitag, 8. Oktober 2010 20:29
> An: ccie_voice@onlinestudylist.com
> Betreff: [OSL
Gesendet: Freitag, 8. Oktober 2010 20:29
An: ccie_voice@onlinestudylist.com
Betreff: [OSL | CCIE_Voice] MVA and MGCP
Hi everyone,
I am trying to figure out how I can configure an MGCP GW to work with
MVA. I have a two sites, HQ (MGCP) and SB (H323) that I am configuring
to work with MVA
Hi everyone,
I am trying to figure out how I can configure an MGCP GW to work with MVA.
I have a two sites, HQ (MGCP) and SB (H323) that I am configuring to work
with MVA.
I have successfully configure my SB router (H323) to allow MVA capability
with this configuration:
Service Par
?
Hth,
Bernhard
Von: Graham Hopkins [mailto:ghopk...@wolf-rock.co.uk]
Gesendet: Freitag, 8. Oktober 2010 10:47
An: amr thabt
Cc: Stutz, Bernhard; ccie_voice@onlinestudylist.com; Pithog Oil
Betreff: Re: [OSL | CCIE_Voice] MVA Troubleshooting lab 6 question 5.3
Currently have a
245-signal h245-alphanumeric
> no vad
>
>
> but this doesn't help either. It looks buggy to me as the calling number is
> always empty and this can't work because the caller 8884343 has already a
> call to 1999 and then gets a call back again? if the caller has a busy
_voice-boun...@onlinestudylist.com im Auftrag von amr thabt
Gesendet: Do 07.10.2010 14:04
An: Pithog Oil
Cc: ccie_voice@onlinestudylist.com
Betreff: Re: [OSL | CCIE_Voice] MVA Troubleshooting lab 6 question 5.3
Hi ,
can you post your dialpeer configuration
hth
amr
On Thu, Oct 7, 2010 at 12:24 AM
al-peer voice 888 voip
> destination-pattern 8884343
> session target ipv4:10.10.210.10
> dtmf-relay h245-signal h245-alphanumeric
> no vad
>
>
> but this doesn't help either. It looks buggy to me as the calling number is
> always empty and this can't work because t
r thabt
Gesendet: Do 07.10.2010 14:04
An: Pithog Oil
Cc: ccie_voice@onlinestudylist.com
Betreff: Re: [OSL | CCIE_Voice] MVA Troubleshooting lab 6 question 5.3
Hi ,
can you post your dialpeer configuration
hth
amr
On Thu, Oct 7, 2010 at 12:24 AM, Pithog Oil wrote:
I spent some time trying t
Hi ,
can you post your dialpeer configuration
hth
amr
On Thu, Oct 7, 2010 at 12:24 AM, Pithog Oil wrote:
>
> I spent some time trying to figure out a fix but, i have not gotten the
> solution yet, whenever i call "*2123945010"* in an attemp to invoke my MVA
> application, it rings quite fine an
--
>
> Message: 1
> Date: Wed, 6 Oct 2010 14:24:17 -0700 (PDT)
> From: Pithog Oil
> http://us.mc1204.mail.yahoo.com/mc/compose?to=pithog...@yahoo.com>
> >
> To:
> ccie_voice@onlinestudylist.com<http://us.mc1204.mail.y
-
Message: 1
Date: Wed, 6 Oct 2010 14:24:17 -0700 (PDT)
From: Pithog Oil
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] MVA Troubleshooting lab 6 question 5.3
Message-ID: <148106.91353...@web120414.mail.ne1.yahoo.com>
Content-Type: text/plain; charset="iso
Re: UCCX challenges (Pithog Oil)
> 5. Re: UCCX challenges (Warren Heaviside (wheavisi))
>
>
> --
>
> Message: 1
> Date: Wed, 6 Oct 2010 14:24:17 -0700 (PDT)
> From: Pithog Oil
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voic
I spent some time trying to figure out a fix but, i have not gotten the
solution yet, whenever i call "2123945010" in an attemp to invoke my MVA
application, it rings quite fine and prompts me for my remote destination, ID
and when i press 1 to call an extension, i try to place a call but the
Hi guys,
Actually I'm working on lab6 Vol2 section Mobility, and I can't get MVA
hairpinning working.
When I call MVA number 2123945010 the call connected and disconnected. I've
created a Route Pattern 5010 routed to h323 gateway, and below my h323 gateway
dial-peer voice 5010 voip
service cmm
.com] On Behalf Of Pavan K
Sent: Tuesday, June 01, 2010 1:37 AM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA on SIPGW
When using SIPGW and trying to transfer a call,
The INVITE with the diversion header reaches CCM but is getting
blocked in there due to a T
t: Tuesday, June 01, 2010 1:37 AM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA on SIPGW
When using SIPGW and trying to transfer a call,
The INVITE with the diversion header reaches CCM but is getting blocked in
there due to a Top level domain mismatch.
Wo
sit our online communities at
www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our
public website at www.ipexpert.com <http://www.ipexpert.com/>
From: Angel Perez
Date: Thu, 3 Jun 2010 15:59:14 +
To: Amy Ryan , osl osl
Subject: RE: [OSL | CCIE_Voice] MVA work
king again
Maybe there are a lot of vm machines for a single server (dual-core 8gb ram)
Thanks
Date: Thu, 3 Jun 2010 09:01:23 -0400
Subject: Re: [OSL | CCIE_Voice] MVA works but I don't hear prompts
From: ar...@ipexpert.com
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
If
: Thu, 3 Jun 2010 08:33:34 +
To: Amy Ryan , osl osl
Subject: RE: [OSL | CCIE_Voice] MVA works but I don't hear prompts
Hi Amy:
I'm working on my own gear, other people has experience similar behaviour
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg15814.html
I can
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg15814.html
I can't post my configs (wr erase yesterday :( ) but I will try to
recreate the issue today and post
Regars
Date: Wed, 2 Jun 2010 23:52:39 -0400
Subject: Re: [OSL | CCIE_Voice] MVA works but I don't hear p
Date: Wed, 2 Jun 2010 23:52:39 -0400
Subject: Re: [OSL | CCIE_Voice] MVA works but I don't hear prompts
From: ar...@ipexpert.com
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
Angel,
I have not experienced this behavior. Can you post the configuration of the
router hosting MVA?
http://www.ipexpert.com/>
From: Angel Perez
Date: Wed, 2 Jun 2010 17:21:42 +0000
To: osl osl
Subject: [OSL | CCIE_Voice] MVA works but I don't hear prompts
Hi:
When I call mva number from pstn, the rd number is matched so I enter de pin
12345 # then 1 # for call and finally the number I w
Hi:
When I call mva number from pstn, the rd number is matched so I enter de pin
12345 # then 1 # for call and finally the number I want to call 911 #
The problem I have is that between the prompts there is a silence of 5 - 7 sec,
sometimes the prompt doesn't sounds, but if I press the c
When using SIPGW and trying to transfer a call,
The INVITE with the diversion header reaches CCM but is getting blocked in
there due to a Top level domain mismatch.
Wondering if anybody got it to work ?
-Pavan
On Mon, May 31, 2010 at 1:55 PM, Pavan K wrote:
> Has any body tried this ?
>
> --
Has any body tried this ?
--
- Pavan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi:
Take a look to DNA on UCM, maybe you can have some information there
hth
Date: Thu, 27 May 2010 17:48:59 -0700
From: lme...@signal.ca
To: bga...@gmail.com
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA issue
Checked that..
I got TAC involved.. They do
4:29 PM
To: Leslie Meade
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA issue
Can you check Mobile Voice Access Number field in the Service Parameter
to see if there are any prefix?
Bo
On Thu, May 27, 2010 at 10:21 AM, Leslie Meade wrote:
I know that
Can you check Mobile Voice Access Number field in the Service Parameter to
see if there are any prefix?
Bo
On Thu, May 27, 2010 at 10:21 AM, Leslie Meade wrote:
> I know that general support is not the best option here. But I will ask..
>
>
>
> I just noticed that my MVA is not working. Use
I know that general support is not the best option here. But I will
ask..
I just noticed that my MVA is not working. Users can log into the system
and attempt to dial, but the then get dead air
Debugs show that some where I am appending an extra 7 to the remote
destination profile, but I do no
max_line 8
> Preferred Codec: g711ulaw
>
> I had the eph 3 already configured as below but somehow it show aboe eh 2
> auto configured ???
>
> telephony-service
> load 7960-7940 P00308000500
> max-ephones 2
> max-dn 2
> ip source-address 10.10.202.1 port 2000
configured manually
device-security-mode none
mac-address 00FF.0043.428A
type CIPC
button 1:2
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100506/2ecdec71/attachment-0001.htm
--
visit our online communities at
www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our
public website at www.ipexpert.com <http://www.ipexpert.com/>
From: Omotayo
Date: Thu, 6 May 2010 17:15:53 -0700
To: OSL Group
Subject: [OSL | CCIE_Voice] MVA Call Disconnect
Hello All,
When i call the MVA number i get prompt for the pin no and press 1 to dail
After dialling the number . the call disconnects
Anyone with similar experience
Hoe do i fix this
thanks
___
For more information regarding industry leading CCIE La
When using MVA in my practice lab the prompts play fine, calls work fine, etc.,
but there seems to be, what I feel, is a long pause between prompts, like 5
seconds or so. It doesn't sound like much but it is just long enough to start
wondering if I got disconnected, or if it didn't receive digit
> - Sent from my Blackberry
>
> - Original Message -
> From: Jason Granat
> To: Berry, Matthew J.
> Cc: ccie_voice@onlinestudylist.com
> Sent: Wed Mar 17 21:32:12 2010
> Subject: Re: [OSL | CCIE_Voice] MVA Disconnects after prompt
>
> 10 seconds on the nose every time.
capabilities are not being setup?
>
> - Sent from my Blackberry
>
> - Original Message -
> From: ccie_voice-boun...@onlinestudylist.com
> >
> To: Jason Granat
> Cc:
> Sent: Wed Mar 17 21:12:44 2010
> Subject: Re: [OSL | CCIE_Voice] MVA Disconnects after
; - Sent from my Blackberry
>
> - Original Message -
> From: ccie_voice-boun...@onlinestudylist.com
> >
> To: Jason Granat
> Cc:
> Sent: Wed Mar 17 21:12:44 2010
> Subject: Re: [OSL | CCIE_Voice] MVA Disconnects after prompt
>
> On a side note SNR work
: Re: [OSL | CCIE_Voice] MVA Disconnects after prompt
On a side note SNR works to the same remote destination from the same
phone, so I would imagine my partitions and CSS's are correct...
Sent while mobile.
On Mar 17, 2010, at 19:09, "Jason Granat" wrote:
> I've seen thi
On a side note SNR works to the same remote destination from the same
phone, so I would imagine my partitions and CSS's are correct...
Sent while mobile.
On Mar 17, 2010, at 19:09, "Jason Granat" wrote:
> I've seen this discussed quite a bit. I have had it working, but after
> another attempt f
I've seen this discussed quite a bit. I have had it working, but after
another attempt from scratch I am able to dial the DID from a remote
destination, I get the 'welcome' message, then after a few seconds the
call disconnects. If I call from a non-remote destination I get the
prompt to input my r
setup MVA-
Roger Källberg
Unified Communication Consultant
Cygate AB
From: anupam TYAGI [mailto:anuf...@gmail.com]
Sent: den 15 mars 2010 04:44
To: Otto Sanchez
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA
it is configured , i am able to reach MVA prompts , but when
>>>>> are you maybe calling to a remote location (g.729) and therefore a
>>>>>>>> xcoder is required, but not set up correctly?
>>>>>>>>
>>>>>>>> 2010/3/12 anupam TYAGI
>>>>>>>&g
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Mar 12, 2010 at 9:08 PM, Berry, Matthew J. <
>>>>>>>> mjbe...@krollontrack.com> wrote:
>>>>>>>>
>>
;>>>>> mjbe...@krollontrack.com> wrote:
>>>>>>>
>>>>>>>> Check the CSS on the remote destination profile you’re calling
>>>>>>>> from.
>>>>>>>>
>>>>>>>> If
2, 2010 at 9:08 PM, Berry, Matthew J. <
>>>>>> mjbe...@krollontrack.com> wrote:
>>>>>>
>>>>>>> Check the CSS on the remote destination profile you’re calling
>>>>>>> from.
>>>>>>>
>>>>
g
>>>>>> from.
>>>>>>
>>>>>> If you do a “debug isdn q931” on the PSTN gateway, do you see the call
>>>>>> hit the gateway?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Your rero
;>>>> Your rerouting CSS on the RDP is used for calls out to your RD.
>>>>>
>>>>> Your CSS on the RDP is used for calls through MVA that are routed out
>>>>> through your PSTN gateway.
>>>>>
>>>>>
>>>&g
to:
>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *anupam TYAGI
>>> *Sent:* Friday, March 12, 2010 9:27 AM
>>> *To:* ccie_voice-requ...@onlinestudylist.com;
>>> ccie_voice@onlinestudylist.com
>>> *Subject:* [OSL | CCIE_Voice
.com] *On Behalf Of *anupam TYAGI
>> *Sent:* Friday, March 12, 2010 9:27 AM
>> *To:* ccie_voice-requ...@onlinestudylist.com;
>> ccie_voice@onlinestudylist.com
>> *Subject:* [OSL | CCIE_Voice] MVA
>>
>>
>>
>> Hi Folks
>>
>> I am doing MVA , Whe
voice-boun...@onlinestudylist.com] *On Behalf Of *anupam TYAGI
> *Sent:* Friday, March 12, 2010 9:27 AM
> *To:* ccie_voice-requ...@onlinestudylist.com;
> ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] MVA
>
>
>
> Hi Folks
>
> I am doing MVA , When i dial
are routed out through
your PSTN gateway.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of anupam TYAGI
Sent: Friday, March 12, 2010 9:27 AM
To: ccie_voice-requ...@onlinestudylist.com; ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] M
Hi Folks
I am doing MVA , When i dial the MVA number , I am able to hear the
prompt. I dial a PSTN number , but the call disconnect . Can any body
suggest me what can be the reason .
Rgds
Anu.
___
For more information regarding industry leading CCIE
s
of Flair Data Systems
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of George
Chongris
Sent: Wednesday, December 16, 2009 11:02 PM
To: Vccie Vccie; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA
I have ran into
y not necessarily reflect the
views
of Flair Data Systems
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vccie Vccie
Sent: Wednesday, December 16, 2009 8:50 PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] MVA
OK,
e that into a 7
>>> digit ANI (3945999) when sending to HQ.
>>>
>>> Find that translation rule on PSTN and modify it so a 10 digit ANI is
>>> sent
>>> to HQ even when the call is local to HQ.
>>>
>>>
>>> Allen Su
>>>
&g
;> to HQ even when the call is local to HQ.
>>
>>
>> Allen Su
>>
>> Date: Wed, 16 Dec 2009 17:07:41 -0600
>> From: Vccie Vccie
>> Subject: [OSL | CCIE_Voice] MVA
>> To: ccie_voice@onlinestudylist.com
>> Message-ID:
>><8adf63bc0912
en Su
>
> Date: Wed, 16 Dec 2009 17:07:41 -0600
> From: Vccie Vccie
> Subject: [OSL | CCIE_Voice] MVA
> To: ccie_voice@onlinestudylist.com
> Message-ID:
><8adf63bc0912161507n4fb18665p42d74524125f9...@mail.gmail.com>
> Content-Type: text/plain; charset="window
local to HQ.
Allen Su
Date: Wed, 16 Dec 2009 17:07:41 -0600
From: Vccie Vccie
Subject: [OSL | CCIE_Voice] MVA
To: ccie_voice@onlinestudylist.com
Message-ID:
<8adf63bc0912161507n4fb18665p42d74524125f9...@mail.gmail.com>
Content-Type: text/plain; charset="windows-1252"
OK, I
this helps!
>
> --
> *From:* Vccie Vccie
> *To:* ccie_voice@onlinestudylist.com
> *Sent:* Wed, December 16, 2009 4:07:41 PM
> *Subject:* [OSL | CCIE_Voice] MVA
>
> OK, I have SNR working with MVA working but I just can’t figure out why the
&g
: Wed, December 16, 2009 4:07:41 PM
Subject: [OSL | CCIE_Voice] MVA
OK, I have SNR working with MVA working but I just can’t
figure out why the Remote Profile is not matched. I can manually enter the
remote destination
number in for authentication and am able to make phone calls but I don’t
Hello,
I have the same experience with the hq pstn phone . if i use the other ones
like br1 or br2 pstn phone, it does not prompt me for the remote destination
number
On Thu, Dec 17, 2009 at 12:07 AM, Vccie Vccie wrote:
> OK, I have SNR working with MVA working but I just can’t figure out why th
OK, I have SNR working with MVA working but I just can’t figure out why the
Remote Profile is not matched. I can manually enter the remote destination
number in for authentication and am able to make phone calls but I don’t
want the –Enter Remote destination prompt-. The PSTN phone is sending t
Hello,
The call flow will be as you mentioned, but with some few additions:
PSTN call-->MGCP gw --> CCM--> H323 gw (call hits mva vxml service and
begins the normal mva flow)-> CCM -> MGCP gw call to PSTN Destination,
So, the intention here is to send the call to the h.323 gw once it is
received
Hi,
I was going through the CUCM Features guide for MVA figured out the way to
perform the hairpining for MVA in case of non H323 Gw.
But I'm not able to do it ,my mind has choked out.
Can anyone guide me how to go about the configuration
PSTN call-->MGCP gw --> CCM--> H323 GW ???
___
Hi,
The dial peer 5010 or 5011 are being matched once a dial out operation
(calling and internal or extenal number) is performed through the mva
application,
1.- You see it twice as the first event (cc_api_call_digit_begin) is
reported when the digit is being dialed or the router recognizes that
Hi,
According to your config It seems that when the initial call comes in (to
2123945999), the voip call leg doesn't hit dial peers 5011 or 5010, can you
make sure it does? you can use an incoming voice translation rule in the
pots dial peer to transform the dialed number to 5999. I have seen drop
I have been able to successfull perform set up internal calls using MVA as
per the LAB 5C 5.12
But while verifing calls to the PSTN by dialing 916178632683 the call gets
disconnected.
The debug voice ccapi inout output is as below , very strange.
==
It will work on both same gateway and also on separate gateway.
From: Aamir Panjwani [mailto:aamir.panjw...@ivision.com.au]
Sent: Monday, 5 October 2009 2:57 PM
To: Kumar, Narinder; Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
So you configured MVA VXML script on a
So you configured MVA VXML script on a separate gateway or on the same
gateway where mgcp is configured?
From: Kumar, Narinder [mailto:narinder.ku...@uxcg.com.au]
Sent: Monday, 5 October 2009 2:44 PM
To: Michael Ciarfello; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Thanks Michael, I did it and works fine.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Monday, 5 October 2009 11:14 AM
To: Kumar, Narinder; Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Convert it back to MGCP and practice the hairpinning mode also. I got
own equipment. Not sure
if you have access to it in the PLs.
From: Kumar, Narinder [narinder.ku...@uxcg.com.au]
Sent: Sunday, October 04, 2009 5:16 AM
To: Aamir Panjwani; Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Just fixed it, had issues
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Make sure CSS (not rerouting CSS which is used for SNR) on the remote
destination profile has visibility of internal DN's partition as well as PSTN
route pattern partitions
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice
inder
Sent: Sunday, 4 October 2009 7:29 PM
To: Michael Ciarfello; OSL Group
Subject: Re: [OSL | CCIE_Voice] MVA Issue
It is question 5.12 in Lab 5 volume 1.
I have bind command and all Dial Peer configured, I will check the CCAPI
output.
From: Michael Ciarfello [mailto:mciarfe...@iplogi
It is question 5.12 in Lab 5 volume 1.
I have bind command and all Dial Peer configured, I will check the CCAPI output.
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Sunday, 4 October 2009 5:27 PM
To: Kumar, Narinder; OSL Group
Subject: RE: [OSL | CCIE_Voice] MVA Issue
Seemed if
ject: [OSL | CCIE_Voice] MVA Issue
I am having some issues with MVA .
When I dial in after keying in my pin number I can turn on or off mobility that
is working fine but I can’t dial out any number I try dialling internal numbers
i.e 3001, 5001 and well as PSTN number as soon as finish dialling
I am having some issues with MVA .
When I dial in after keying in my pin number I can turn on or off mobility that
is working fine but I can’t dial out any number I try dialling internal numbers
i.e 3001, 5001 and well as PSTN number as soon as finish dialling the number
after pressing # the cal
301 - 392 of 392 matches
Mail list logo