Re: [Chevelle-list] front coil springs

ng coil is suppose to be located between those 2 holes. IE One hole will be blocked by the spring & one hole will be open when viewed from below.. Don't know about earlier years. On 6/13/08, Jim H. Thompson <[EMAIL PROTECTED]> wrote: Depends on the year. Some control arms

Re: [Chevelle-list] front coil springs

Depends on the year. Some control arms are indented for the end of the spring. I did not use spacers on the front the rear had them on top. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim & Chris Sent: Friday, June 13, 2008 7:07 PM To: chevelle-list@chevelles.net Cc: [E

Re: [Chevelle-list] motor number

The value of being "original" is being all original. Putting sleeves in a block is ok if you want to be original. They have been known to fail. Decking and align boring should always be considered if this a total rebuild. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

[Chevelle-list] front coil springs

I have two questions 1.) where does the bottom end of the front coil spring sit in the lower control arm ? the deepest part is after the 2 weep holes clockwise looking down. 2.) should there be rubber spaceres between the spring and fram/ control arm ? I've done this before but I don't think I d

Re: [Chevelle-list] chevelleengineer

Does anybody know someone who restores stock gauges? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Sent: Thursday, June 12, 2008 11:16 AM To: 'The Chevelle Mailing List' Subject: [Chevelle-list] chevelleengineer Don't mean to hijack the thread For some reason, Mr.

Re: [Chevelle-list] 66 dash

Hinshaws has a number of bolt/fastener kits. I just got some of those press on washers for the heater cables. http://www.hinshawschevelle.com From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of jimmy brown Sent: Tuesday, June 10, 2008 11:06 AM To: chevellelist Subject: [Chevelle

Re: [Chevelle-list] Hot Restart

Is there a resistor on HEI? I thought it was a straight 12V. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Terry S Hodges Sent: Tuesday, June 03, 2008 3:13 PM To: [EMAIL PROTECTED]; The Chevelle Mailing List; The Chevelle Mailing List Cc: [EMAIL PROTECTED] Subject: Re: [Chevell

Re: [Chevelle-list] Hot Restart

Oil filled coils that are installed sideways sometimes fail. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Nasta Sent: Tuesday, June 03, 2008 2:49 PM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] Hot Restart If there's a lack of spar

Re: [Chevelle-list] Hot Restart

Warm day ...Vapor lock What kind of fuel line? Is it run in stock location? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, June 03, 2008 2:28 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Hot Restart Hi Rick, No and it

Re: [Chevelle-list] Hot Restart

Vapor lock Hi Guys, Thanks to those who were big help when installing a new 2005 GMPP crate 350 in my 1965 Chevelle Malibu SS. It's been running perfectly for 6,000 miles but twice in the last month refused to start after being driven more than ten miles and stopped for 20 minutes.

Re: [Chevelle-list] Joe America. O/T

Dave, Right on. I haven't checked the Team Chevelle website yet today. If you haven't posted it there, would you please. We need to wake the sleeping giant. Us.

Re: [Chevelle-list] Internet Scam

Perhaps if our punishment system was more drastic it would discourage this type activity. Maybe the Chinese and Muslim countries got it right. Punishment to fit the crime. (At least from what I've heard.) If you sin with your hands/fingers they cut them off. If you sin with your tongue they

[Chevelle-list] Chevellebration

I will not be using my dinner ticket Sat. Is somebody needs one. Catch me on my cell 301-659-0672 Jim American Chevelle Enthusiasts Society #03198 Team Chevelle #4424 http://picasaweb.google.com/JimThompsonCC/65MalibuSS02 http://www.jimhthompson.com <>

Re: [Chevelle-list] Is there really a "high flow water pump?"

Dropping the temp of your thermostat will not affect an overheating problem. - Original Message - From: Jim H. Thompson <mailto:[EMAIL PROTECTED]> To: 'The <mailto:chevelle-list@chevelles.net> Chevelle Mailing List' Sent: Friday, May 30, 2008 6:53 PM Subject: Re:

Re: [Chevelle-list] Is there really a "high flow water pump?"

flow system. If you have a clutch fan replace with an aluminum flex fan. Make sure your fan blades come to the back lip of your shroud. Jim From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of tabius barrett Sent: Friday, May 30, 2008 2:42 PM To: chevelle-list@chevelles.net Su

Re: [Chevelle-list] Fwd: Fw: American Gas

Checked this out on Snopes and it is False. Here's a link to the info. Valero actually imports 153.5 million barrels from the ME. http://www.snopes.com/politics/gasoline/saudigas.asp - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Friday,

[Chevelle-list] removing filler neck from gas tank

If you can drive the ring around the sending unit and release it. Then there should be enough room remove to replace it with the tank in the car. Steve, As has already been said, the filler neck is welded to the tank. Removing the tank with the neck attached is you only option. Can you drop

[Chevelle-list] Anyone looking for 68-69 parts?

ake any reasonable offer). I'd post the list of stuff here but that'd probably be spamming, so if anyone would like to see the list, you can drop me a line @ [EMAIL PROTECTED] 2) to say goodbye to everyone here & to THANK you for all the help to my specific questions over the yea

Re: [Chevelle-list] Off Topic - Disposing of Wheels

n. Can't decide if I want the 21 or 22 inch chrome spinners. JK Jim - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Tuesday, May 13, 2008 9:27 PM Subject: [Chevelle-list] Off Topic - Disposing of Wheels Hi Guys, A

Re: [Chevelle-list] fuel gauge test

. If this fails check the ground to your instrument cluster. There should be 12 volts to the other side of the gauge. Jim From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, May 10, 2008 7:25 PM To: chevelle-list@chevelles.net Subject: [Chevelle

Re: [Chevelle-list] Gene's General Restoration Parts Newsletter

Where is the shop? From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Josh Campbell Sent: Monday, May 05, 2008 8:53 PM To: [EMAIL PROTECTED]; The Chevelle Mailing List Subject: Re: [Chevelle-list] Gene's General Restoration Parts Newsletter Well while we're at it with the cheap

[Chevelle-list] Looking for opinions on a fair price for a 69 SS396 in good shape

and the new parts I have for it list for well over $1000 new. Anyone have any opinions or ideas what I should ask for it? I'm NOT looking to make a killing but if I do decide to sell it, I would like it to sell and not sit with a sale sign on it for months & months. Thoughts? Jim -69-SS396- H.

Re: [Chevelle-list] Chevellebration

ng to get someone to ride along with me this year. Tom Rightler MCC Newsletter Editor I booked my room. Anyone else going? Jim American Chevelle Enthusiasts Society #03198 Team Chevelle #4424 http://picasaweb.google.com/JimThompsonCC/65MalibuSS02 http://www.jimhthompso

Re: [Chevelle-list] Firewall

Thanks for all the impute. The stuff I am looking at is not a true diamond plate. It is a very thin aluminum sheet that has a small diamond plate pattern. It comes with a coating clear or red or blue or black. So it is easy to clean. Now if the diamonds were "bowties" maybe I would get a m

[Chevelle-list] Chevellebration

I booked my room. Anyone else going? Jim American Chevelle Enthusiasts Society #03198 Team Chevelle #4424 http://picasaweb.google.com/JimThompsonCC/65MalibuSS02 http://www.jimhthompson.com <>

[Chevelle-list] Firewall

http://cutsmetal.net/024quot-super-thin-cosmetic-diamond-plate-aluminum-quot 24quot-x0242448.html I want to finish the firewall. Anything but black. Have not decided on a body color. Check this link out. Let me know what you guys think. I want something bright. Jim American

Re: [Chevelle-list] D/A Sander???

If you are welding in a patch buy a 4” grinder or a right angle ¼” grinder to grind the welds and cut out the rust. D/A are for large areas of paint prep. Your electric sander should do well enough. Block sand filler by hand unless you are covering a large area. From: [EMAIL PROTECTED] [ma

Re: [Chevelle-list] seat swap

Do you want original buckets or aftermarket or any you can find? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, April 19, 2008 9:08 AM To: chevelle-list@chevelles.net Subject: [Chevelle-list] seat swap Hello I'm a newbee

Re: [Chevelle-list] A/C Question...

Keep the R12 Have an AC shop pull the system down with vacuum and see if it holds - no leaks first. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Friday, April 18, 2008 1:32 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] A/C Question...

Re: [Chevelle-list] firewall

Chevelle Mailing List Subject: Re: [Chevelle-list] firewall Jim - Did you happen to find the VIN on the frame? If so where? Mine is gone off the door post and I would love to find one on the frame. Larry Williams Jim H. Thompson wrote: > > I'm working on the firewall. > > All the

[Chevelle-list] firewall

I'm working on the firewall. All the paint is stripped. The pedals removed, heater gone, etc. . Should I smooth it and paint it black? . Replace the calking, and go for a factory look? . How about GM trunk paint and clear coat? . Cover with diamond pl

Re: [Chevelle-list] 1965 Frame & Rearend

I have a 65 convertible if you need anything more. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Holleman Sent: Friday, April 11, 2008 8:49 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 1965 Frame & Rearend Larry, I just happen to have a 65 El Camino ch

Re: [Chevelle-list] 65 Steering Column

No, I am replacing mine with a tilt from a third gen. So far looks like a bolt in. Jim From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eddie Bumgarner Sent: Tuesday, April 08, 2008 8:14 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] 65 Steering Column The

Re: [Chevelle-list] [Fwd: Oil reserves in US]

another?? Sorry for the long post guys. Let's get something started. Jim S. - Original Message - From: "Chuck Speake" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "'The Chevelle Mailing List'" Sent: Saturday, April 05, 2008 3:18 PM

Re: [Chevelle-list] frame weld

roughley 1/4''x3/8''. what I planed was to weld it closed and grind it down ? Jimmy.C. - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Sunday, April 06, 2008 3:48 PM Subject: Re: [Chevelle-list] frame weld In a message dated 4/6/2008 11:

[Chevelle-list] frame weld

I have a small rust hole in in the frame just between the wheel and front bumper. I want to weld it closed . besides the battery is there anything (electronics) that shoud be disconected ? thanks , Jimmy.C

Re: [Chevelle-list] poly bushings

Amen to that! thanks for the reassurance . I have the pypes -x system that makes me sorry I put a good sterio system in the car to try and make it more appealling to my teenage son.(but I think he likes the sound of the car) so if it squeeks a little , I guess I won't mind. thanks to all, Jimm

[Chevelle-list] poly bushings

I know this has been mentioned on the list before but I need to be refreshed. POLY bushings for front upper and lower control arms pro's & cons ? Jimmy.C

Re: [Chevelle-list] Recordnet.com: Classic cars targeted for smogchecks (3:20 p.m.)

. When all the major pollution contributors have been dealt with and the air is still questionable, we can look this at that time. Thanks for doing it. Jim - Original Message - From: "Larry Williams" <[EMAIL PROTECTED]> To: "John Wotila" <[EMAIL PROTE

Re: [Chevelle-list] Please unsubscribe me

Matt, Good catch. Even the name should have given it away. - Original Message - From: "Matthew Post" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Tuesday, April 01, 2008 11:26 AM Subject: Re: [Chevelle-list] Please unsubscribe me Come on guys! That's got to be an Ap

Re: [Chevelle-list] GM Resto Kit

Dale, Thanks for the heads up. Just ordered a kit for my '69 Malibu. The 800 number you posted worked for me. They did ask for the VIN. Thanks again. Jim S. - Original Message - From: ted laidig To: The Chevelle Mailing List Sent: Tuesday, March 25, 2008 8:

[Chevelle-list] fuel gauge

I need a photo of the back of a Chevelle fuel gauge. I need to know where the ceramic block goes, the insulator and the wire connectors. They should all be the same up to 1985. Jim;) <>

Re: [Chevelle-list] spindles or springs

ory. A free 'Restoration Kit' from GM for a 72 will list all the springs by part number and broadcast code. It'll also show the factory ride heights for different models - regardless of engine or accessories. Dale McIntosh ChevelleCD.com ChevelleStuff.com ---

[Chevelle-list] spindles or springs

I am looking for suggestions/advice on lowering the front end of my "72" chevelle. origonally a small block car, I swaped in a big block and liked the stance with the small block springs but didnt like when the header flanges bottomed out. I installed bbc springs and now I think the front is to

Re: [Chevelle-list] [Chevelle List] Starting up an old motor...

Make sure you have good gas. Disconnect the fuel line from the carb and use rubber fuel line and run it into a clean plastic milk or juice jug. Spray the cylinders down with "top cylinder lube". Let it sit over night. Crank it over without plugs. Now check the gas in the jug. Look for beads o

Re: [Chevelle-list] Proportioning Valve Problems

On mine, there was a rubber covered button that I had press to get fluid to go to the rear. Not sure if that was reqequired or just happened at the same time. Jim _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Hickman Sent: Wednesday, March 12, 2008 4:18

[Chevelle-list] Moving On

. Thanks, Jim Buckingham

Re: [Chevelle-list] Seeking Radio Information

There are some companies selling modern stereos that look original. Here are a couple sites that sell original. http://www.classicradio.com/ http://www.oldautoradio.com/ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of richard sierra Sent: Monday, March 03, 2008 8:56 PM

Re: [Chevelle-list] Horrific - keep it on the track

I that happened on Rt 210 on the border of PG and charles county. Jim Buckingham _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl Groves Sent: Sunday, March 02, 2008 6:46 AM To: 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] Horrific - keep

Re: [Chevelle-list] Brake Proportioning Valve

http://ss396.com/tech.htm this should be everything you need. Jim From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Hickman Sent: Saturday, March 01, 2008 5:06 PM To: Chevelle List Subject: [Chevelle-list] Brake Proportioning Valve What I really need is a schematic for

Re: [Chevelle-list] Please help! Sway bar information

. Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rowan, Jerry Sent: Saturday, March 01, 2008 10:31 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Please help! Sway bar information I am buying a 67 Chevelle SS396 and I will need a rear anti

Re: [Chevelle-list] master cylinder bench bleeding

Thanks bad66. I will also be needing this shortly. Jim

Re: [Chevelle-list] 65 sheetmetal parts

Last year I saw a guy at Carlisle who had two sections cut completely off just behind the wheel wells. Trunk lip and all. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dean Vandergriff Sent: Monday, February 18, 2008 12:52 PM To: The Chevelle Mailing List Subject: [Chevelle-lis

Re: [Chevelle-list] Horrific - keep it on the track

ame by shortly afterward may also have struck someone on the road as it tried to avoid the crash. [Jim Thompson] The tire smoke was like a fog across the highway. The poor bastard who came along just drove into the fog. How was he to know people were standing in the middle of the road looking

[Chevelle-list] FW: smooth firewall

getting one location to ship to would be the key. From: Paul Gonzalez [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 13, 2008 12:13 PM To: [EMAIL PROTECTED] Subject: RE: smooth firewall Jim please call me @ 714 904 cell and we will talk about it. Paul G _ NOTICE: This e-mail

Re: [Chevelle-list] Hello? / Engine Storage Box

Isn't that overkill? Did you flush the cooling system and change the oil? Spray the cylinders down to keep the rings from rusting? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, February 14, 2008 4:22 PM To: chevelle-lis

Re: [Chevelle-list] wanted complete 283 in MD, PA, NJ, DE

for a 283 if anyone has one they want to get out of their garage. It would be great if it was running when pulled, let me know prices and availability. Thanks, Jim '66 Malibu Be a better friend, newshound

Re: [Chevelle-list] (no subject)

the prices couldn't have been that bad. Just my .02 Jim

Re: [Chevelle-list] HOW-TO INSTALL POWER WINDOWS ON A BUDGET

I got a $14.95 power converter after a trip to the thrift shop for two mixers. An extra one for the back seat now that's class. PS: you might need an extent ion cord to run the cable under the front seat. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Pruett Sent: Monda

Re: [Chevelle-list] Carpet

ACC http://store.summitracing.com/sitemap2.asp?N=700+115+400367 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Schaefer Sent: Monday, January 21, 2008 12:56 PM To: The Chevelle Mailing List Subject: [Chevelle-list] Carpet Does anyone know of a carpet supplier who

Re: [Chevelle-list] A/C deleted

I think the company is called "American Graffiti"that manufactures them and I got the heater box / AC Delete for my "72" from ground up. I will look through my old recipts and will let you know for sure when I find it. Jimmy C. - Original Message - From: Herb Lumpp To: 'The Cheve

[Chevelle-list] YearOne codes

. Plus shipping. I placed an order New Years day. The deal was great. I just didn't order enough. I got all this info on a flyer when my order arrived. I don't think you will see it on the web site. Jim <>

Re: [Chevelle-list] OT

That's what I keep telling my wife.. - Original Message - From: Rich Pruett To: The Chevelle Mailing List Sent: Monday, January 07, 2008 11:44 AM Subject: Re: [Chevelle-list] Carburetor Jim, Are you saying that size does not matter? I'm here to tell y

Re: [Chevelle-list] Carburetor

I'm surprised I got this one. I am blocking all emails with "size" in the text. - Original Message - From: "Malibu" <[EMAIL PROTECTED]> To: "The Chevelle Mailing List" Sent: Monday, January 07, 2008 9:28 AM Subject: Re: [Chevelle-list] Carburetor Go here John, and scroll down to

Re: [Chevelle-list] Car won't start

Rule #1 start with something you know is OK. Since the power comes from the battery that is the first thing you make sure is right. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Josh Campbell Sent: Tuesday, January 01, 2008 8:39 PM To: The Chevelle Mailing List Subject: [Chevel

Re: [Chevelle-list] Two Motors

The LT1 Has the roller cam? Great block. Buy the hot cam kit and LT4 heads super street rod motor. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of mike f Sent: Wednesday, December 19, 2007 10:08 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list

Re: [Chevelle-list] Door Hinges

I got a tool from Eastwood that did the springs so easy. I think it was 15 bucks but worked great. Jim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, December 31, 2007 5:14 PM To: Chevelle List Subject: Re: [Chevelle

Re: [Chevelle-list] With a heavy heart

Ryan, You and your family will be in our prayers. My sister went through this with her son several years ago. God, Faith and Prayer got them through this. Jim From: langus To: Chevelle Chat Forum Sent: Saturday, December 29, 2007 9:57 PM Subject: [Chevelle-list] With a heavy heartThis is

Re: [Chevelle-list] With a heavy heart

Ryan, I'll add your daughter to my prayer list. Have faith that miracles will happen. The son of our friends beat hodgkins with treatment from IA City, so good things do happen. Jim Near Waterloo _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of langus Sent: Sat

Re: [Chevelle-list] Coil Spring Question

Josh, I think tose are weep holes to let water drain out. when I done the springs on my 72 there was an indentation in the lower control arm that the end of the bottom of the coil fits into.and the flat side goes up,which I think was just mentioned on the list. hope it helps. if it does'nt I wi

Re: [Chevelle-list] Motor Mounts

http://www.yearone.com/pco/0_0907/0218.asp Check this page. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, December 05, 2007 12:32 PM To: chevelle-list@chevelles.net Subject: [Chevelle-list] Motor Mounts I've been reading the questions

Re: [Chevelle-list] 1965 Chevy Commercial

The sad thing is I saw this when it was new. All the actors are dead except Parnell Roberts. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Pell Sent: Friday, November 30, 2007 6:19 PM To: ChevelleList Subject: [Chevelle-list] 1965 Chevy Commercia

Re: [Chevelle-list] 12 Bolt Spider Gear Washer

You need to pull the center pin. Spin the internals around until you get the spider gear you want at the opening. Slip in the washer and spin it back around. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Solomon Sent: Saturday, December 01, 2007 3:25 PM To: The Chevelle

Re: [Chevelle-list] Motor Mounts

me in about the truck compatibility. Jim - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Wednesday, December 05, 2007 12:32 PM Subject: [Chevelle-list] Motor Mounts I've been reading the questions posted for the last couple of years and

Re: [Chevelle-list] Chevelle Parts

Hey Denny, how much are you looking for the fan & fan clutch. Jimmy C. - Original Message - From: Denny Shewmake To: chevelle-list@chevelles.net Sent: Tuesday, December 04, 2007 11:11 AM Subject: [Chevelle-list] Chevelle Parts If anyone is interested or needs something.

Re: [Chevelle-list] 1965 Chevy Commercial

Rick, What a coincidence. I just rec'd this email and was going to post it One of my regular email buddies. Nothing to do with the list. We should all be so thankful to Al Gore for shrinking our world with his invention. - Original Message - From: Rick Schaefer To: Th

Re: [Chevelle-list] 283 balancer?

HP and better mileage. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chevelle292wagon dejazzd.com Sent: Wednesday, November 21, 2007 7:04 PM To: chevelle-list@chevelles.net Subject: Re: [Chevelle-list] 283 balancer? From: "Jim H. Thompson" <[EMAIL PROTECTED]&

Re: [Chevelle-list] Chevelle-list Digest, Vol 52, Issue 37

Dan, This sounds like one of the scams that eBay advertises about. Maybe it was somebody at the Chevelle website that experienced something very similar. Be careful. - Original Message - From: "Daniel Mascheck" <[EMAIL PROTECTED]> To: Sent: Thursday, November 22, 2007 5:29 PM Sub

Re: [Chevelle-list] Not Chevelle but need help Try Again

Dave has anyone contacted you yet?? Jim S. - Original Message - From: Dave Benjamin To: The Chevelle Mailing List Sent: Tuesday, November 20, 2007 12:37 PM Subject: Re: [Chevelle-list] Not Chevelle but need help Try Again Yes that is why I am looking for someone to grab

Re: [Chevelle-list] A new El Camino?????

If you want to sell an El Camino just change the front end on a S10.

Re: [Chevelle-list] NPG or Supplier in Ocala

Thanks Jim _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Allen Sent: Wednesday, November 21, 2007 8:00 AM To: [EMAIL PROTECTED]; 'The Chevelle Mailing List' Subject: Re: [Chevelle-list] NPG or Supplier in Ocala That would be NPD and here is there i

Re: [Chevelle-list] NPG or Supplier in Ocala

Yeah that is the Turkey Run. I could not time it this year to be there, just came home on Monday. Jim _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Sent: Wednesday, November 21, 2007 7:50 AM To: [EMAIL PROTECTED]; The Chevelle Mailing List Subject: Re

[Chevelle-list] NPG or Supplier in Ocala

Is there a NPG or one of the other big suppliers located in Ocala Fl I need to get a set of fenders and thought that would be the closest place. Thanks, Jim

Re: [Chevelle-list] 283 balancer?

Waste of time. Same balancer used on 283,327,307. You have a small journal crank. Unless the rubber insulator ring is shot. I suggest the Chevy 327/350 hyd (Crane cam WG996K grind151H) cam swap if your pulling the intake and balancer. Replacement factory ID #3563151 for 325 or 350 HP engin

Re: [Chevelle-list] Body off on Wednesday

That is a weak area on the fire wall. The factory used large J hooks in the opening above the front body mounts. One suggestion though, why not pick up the body on the top of the firewall where the top fender bolts go

Re: [Chevelle-list] Body off on Wednesday

Having done this myself. The body is heavy towards the rear. Even with the gas tank removed. I suggest removing the front wind shield and rear window. I didn’t and the next morning the front glass had cracked over night. Keep the doors on. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]

Re: [Chevelle-list] Microsoft Word

http://www.tuaw.com/2007/05/15/microsoft-releases-word-2007-docx-file-conver ter/ Are you using a MAC? Check this link. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, November 17, 2007 7:18 PM To: chevelle-list@chevelles.net Subject: [Chevel

Re: [Chevelle-list] 2 post lift

http://www.eastwoodco.com/jump.jsp?itemID=12248 &itemType=PRODUCT This lift is only 6' 10" will fit under the garage door. 4 post From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kyle Bennett Sent: Wednesday, N

Re: [Chevelle-list] Another Question How About Mini-tubbing

http://www.powerblocktv.com/sites/musclecar/downloads/ Download the Lemans episode that you watched. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Josh Campbell Sent: Thursday, November 08, 2007 8:52 AM To: The Chevelle Mailing List Subject: [Chevelle-list] Another Question

[Chevelle-list] Fw: HEI conversion / heads

- Original Message - From: Jim & Chris To: Dale Sent: Tuesday, November 13, 2007 10:37 PM Subject: Re: [Chevelle-list] HEI conversion / heads Thanks Guys,for theHEI info and for helping me clear up the head issue.tomorrow I'll have a better idea about what I'm looki

Re: [Chevelle-list] Quiet time Filler

For those of you with a few minutes to spare. It's kind of car related. Turn your sound up. http://www.chumfm.com/MorningShow/bits/march24.swf

[Chevelle-list] HEI conversion / heads

First,I was wondering if any one can explain how to convvert from a old style points distributer to HEI ? or suggest a link. Secondly, I was wondering what the advanteges or differences between open and closed chamber heads. Tomorrow I am going to look through old parts that have been sitting i

Re: [Chevelle-list] Trunk Floors

American Hot Rod did a 56. I would try to buy those shows. http://www.tv.com/american-hot-rod/show/31300/episode_listings.html Junkyard Dog. I remember they did a marathon session on the car. Came in the next day and realized they left out the trunk braces and had to do it all over. These are

Re: [Chevelle-list] Chevelle-list Digest, Vol 52, Issue 8

Oh-Oh. This is gonna get bad. Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Tuesday, November 06, 2007 2:42 PM Subject: Re: [Chevelle-list] Chevelle-list Digest, Vol 52, Issue 8 PLEASE DO NOT SEND ME ANY MORE E-MAILS; TAKE ME OFF YOUR

Re: [Chevelle-list] Trunk Floors

If you have the money go big. I pieced meal my trunk because it was the my first effort. In retrospect a one piece floor is less work. The convertible has more body mounts 14. I had to air chisel 2 mounts in the trunk. Later when I started stripping the rest of the trunk floor, after I did the tw

Re: [Chevelle-list] Chevelles in nascar in 68-72?

Didn’t Smokie build one??? In fact his was what ¾ sized even. Jim _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Carl Ziegler Sent: Thursday, November 01, 2007 4:19 PM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Chevelles in nascar in 68-72

[Chevelle-list] Brakes

sitting even so it would have to be one of the fittings. Jim 72 Chevelle

Re: [Chevelle-list] car covers

Joe, North Carolina winters Come to New York in February and you'll see what the elements are really like. Jim - Original Message - From: [EMAIL PROTECTED] To: chevelle-list@chevelles.net Sent: Wednesday, October 31, 2007 8:51 PM Subject: Re: [Chevelle-list

Re: [Chevelle-list] Wiring

I have used M&H and their stuff is great, no problems. One note I tried to get the tach wire for an HEI and called M&H. They had them but were out Year one had just bought all of them. The price from M&H was like 6 or 8 bucks, from Year One, 15 plus 8 shipping and hand

Re: [Chevelle-list] starter & starter wiring

You don't need a kit. Get a ford solenoid at advanced auto and the wiring diagram from Mad on line. Takes about 30 mins tops. You will need some #10 gauge wire, a piece of battery terminal wire and lugs, some terminals and a drill to mount the solenoid. I did this about 2 months ago.

<    1   2   3   4   5   6   7   8   9   >