Re: Q on Perl

Teach yourself PERL in 24 days, www.informit.com , www.itknowledge.com Hixon Sgt James R Jr wrote: > > Does anyone know a good foundation book on how to write Perl scripts, and to > start learning them? > Thanks > > Sgt James R Hixon > Network Engineer > MCB G-6 Network Engineering > DSN 645-

Re: Microsoft Radius (IAS)

Two things you should check one is the radius port address which should match to those of the router, second you should use only PAP not CHAP. Cheers Kiarash Tony Russell wrote: > > Has any successfully used Microsoft Radius (Internet Authentication Server) > with a cisco router. If so, what

Boson tests are poor for preparation!

Do not use Boson tests. They do not prepare you for the BSCN exam! They simply have no resemblence to the real thing. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Re

RE: Booting In Bootrom with the TFTP command (Urgent)

Hi, The 2500 does not do xmodem. If when in boot mode you cannot erase the flash manually it is either knackered or there is also the possibility that the main-board jumper for the flash has been set to write-protect. Fwom the message that you are getting, I would check this. HTH Andy Lennon C

EIGRP & IGRP

what is max hop count for EIGRP & IGRP for IP Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html

RE: ISDN problem

Do you have chap auth running? -Original Message- From: Mike Popescu [mailto:[EMAIL PROTECTED]] Sent: 11 August 2000 04:51 To: [EMAIL PROTECTED] Subject: ISDN problem Hi All, Does anyone came across with the error message: PPP Serialx/0:5 protocol reject received for protocol = 0x80

RE: SDSL statement : True or False ?

I presume there is still the issue of cost of equipment and profit to the carrier. Most you guys ( ISP's and DSL providers ) still pretty much think in terms of home user with one computer, and you want your installers in and out quickly with no problem. Your customers want it cheap and want it to

RE: WICs

It is a very simple job. BUT although it is hot swappable (in the sense you can plug it in while the router is still running) it will not burst into life until the router is rebooted. -Original Message- From: Montgomery, Robert WARCOM Contractor [mailto:[EMAIL PROTECTED]] Sent: 10 August

RE: Q on Perl

The O'Reilly Books are by far the best. You can get the list of books below on one CD... great for quickly reading up and then cut and pasting code Learning Perl Programming Perl The Perl Cook Book Advance Perl Programming -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTE

Re: EIGRP & IGRP

default=100, you can configure that value to 255 using command " mertic maximum-hops *** " "Tapas Das" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > what is max hop count for EIGRP & IGRP for IP > _

passwd CCDA today

hard test imho becouse a lot of case studies.. and my english is poor 8-< -- POLBOX ON-Line Network Admin (CCDA, CCNA 2.0) Death is Only The Beginning... PGP-key http://www.szczecin.mtl.pl/~awo/awo-asc.pgp D2 E3 0B B4 D8 F0 EE A6 48 33 AD 33 F7 B5 E9 B1 _

BCMSN

Hello all, I have the BCMSN on sunday and I was wondering if anyone out there who has taken the test knows if you get fill in the blank question, no flames please I 'm not asking for questions. Thanks in advance Remi Do You

RE: Static, Conduit question.

I think with ur configuration u have enabled only Inbound. The same neexds to be enabled for Outbound as wel with NAT and Global configuration pair and Outbound (Optional). Try these and give us the feedback [EMAIL PROTECTED] on 08/11/2000 03:08:22 AM Please respond to [EMAIL PROTECTED] T

Telco ATM to Frame conversion

Hi all   I'm currently desgning a network with 200 sites connecting via frame relay to the three core sites with the core being a fully meshed ATM switched network (Xylan layer 2 and 3 ATM switches).   What I'm wondering about and haven't had much luck finding out from the telco's is whethe

Re: Great CCDA Study Site (CCDA exam length)

This Web site says the new CCDA is 72 questions in 120 minutes, with 3 case studies. I did CCDA 640-441 2 days ago in Frankfurt, Germany. (Pass.) There were 72 questions, all right, but 4 case studies and the time allowed was 150 minutes. And there is this annoying survey at the start whic

FW: BCMSN

Remi I didn't when I passed mine this week. Andy > -Original Message- > From: OLUREMI DAWODU [SMTP:[EMAIL PROTECTED]] > Sent: 11 August 2000 09:58 > To: [EMAIL PROTECTED] > Subject: BCMSN > > > Hello all, > > I have the BCMSN on sunday and I was wondering if > anyone out

Re: WICs

That depends on the router, on the 7206VXR's that I run the modules are hot pluggable and ready upon insertion. Tim - Original Message - From: "McCallum, Robert" <[EMAIL PROTECTED]> To: "'Montgomery, Robert WARCOM Contractor'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Friday, August

RE: Great CCDA Study Site (CCDA exam length)

there is a 30 min. extension for the non-english natives. The difference may come from there. --- Gabriel Neagoe, GN379-RIPE Networking solutions consultant Cisco product manager, CCNP, CCDA S&T Romania tel: +401 20 40 300 fax: +401 20 40 310

CCDA

Title: CCDA  Can anyone refer to me a good book for preparing for CCDA, currently i am referring to the official cisco press study kit, but I feel it wouldn't be sufficient. Thanks in advance. Shaikh Raees Ahmed, Microsoft Certified Systems Engineer, Cisco Certified Network Associate, Syst

RE: CCDA

You can't go wrong with Top Down Network Design, (and the author is on this list too) and the Cisco Press book. Jim -Original Message- From: Raees Ahmed Shaikh [mailto:[EMAIL PROTECTED]] Sent: Friday, August 11, 2000 7:16 AM To: '[EMAIL PROTECTED]' Subject: CCDA Can anyone refe

RE: WICs

WIC's are NOT hot-swappable, but port adapters are 7200's are. On 7500's port adapters connected via VIP cards are not hot swappable either (even if they are not screwed in). Andy Lennon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tim O'Brien Sent:

Re: Q on Perl

Have you been to http://www.perl.com/ Good place to start. O'Reilly publish some books on the subject. Ben --- Hixon Sgt James R Jr <[EMAIL PROTECTED]> wrote: > Does anyone know a good foundation book on how to write Perl scripts, > and to > start learning them? > Thanks > > Sgt James R Hixon

Re: Boson tests are poor for preparation!

as expectedstill in Beta mode ...that's why "rtc" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Do not use Boson tests. They do not prepare you for the BSCN exam! They > simply have no resemblence to the real thing. > >

Re: CCIE

Some days it feels like all of them Read everything on the docco cd thoroughly - if youre still hungry after that you'll know what you need. - Original Message - From: "BB" <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: <[EMAIL PROTECTED]> Sent: Wednesday, August 09, 2000 11:22 PM

Trace route over PIX

Hi Group Been working on a pix and have come across a strange issue. Have ICMP allowed via the pix, but when a trace route is passed over it, all host names after the pix are replaced with the final address and name. So if the destination is 5 hops behind a pix and is called mail1, then on you

RE: SDSL statement : True or False ?

It is surprising since Netopia and Cisco equipment work very well together (in my opinion). You can request from them a regular DSL modem and plug the Cisco into that letting them handle everything up to and including the modem. Also, I am not saying Cisco is god and everyone should use them, but

RE: SDSL statement : True or False ?

Thanks Scott, P.S. What does YMMV stand for? - ("You Make Me Vomit" ???) :-) Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] -Original Message- From: Scott Nelson [mailto:[E

Re: Cisco compatible memory

www.crucial.com On Fri, 28 Jul 2000, Barrett wrote: > Any links to cheap cisco compatible memory is appreciated. Thanks > > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.g

RE: Masterbowser, netbios name, wins

WINS is used to register netbios names and map them to ip addresses. Similiar to DNS except DNS is a Host name to ip address system. The netbios name is of course the name you give to your machine. The master browser is and backup master browser keep a list of available network resources. Master b

ATM Lane & Gigabit Ethernet

Team: We are upgrading our network to Gigabit Ethernet from ATM Lane. Are any of you aware of any known problems or caveats in implementing this migration successfully? = Please Reply to: [EMAIL PROTECTED] --- Douglas A. McConnell BV Sol

ADDITIONAL DRAWINGS FOR VISIO

At one time someone on this site located a web sight where you could download additional network diagrams to be used in visio, ANYONE STILL KNOW OF THIS SIGHT??? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archive

RE: Telco ATM to Frame conversion

I'm working a similar project migrating from Frame Relay to ATM, where the Frame Relay cloud (Sprint/Bell South) is attached to Cisco 4700s on the local campuses with Xylan or Cabletron at the core and the ATM is Marconi/FORE 9500s(also Sprint/Bell South).   What I'm finding out about the

Re: Ethernet Troubleshooting Woes

I agree that this appears to be a cabling issue, but if that were the case why does our IP traffic not suffer at all? There are zero errors with our IP traffic, but this one single application that uses IPX doesn't function well over that cabling. So, does that necessarily mean that the problem

Re: SDSL statement : True or False ?

I think some comes down to a control issue the ISP's don't want you playing with their Dslam etc and also they get very sweet deals on the last mile stuff. So why should they and there are compatability issues I forget right now what the issue was Als look at it from netopia's point why s

RE: ADDITIONAL DRAWINGS FOR VISIO

The ones I have bookmarked are: http://www.dtool.com/cisco_visio.zip www.cisco.com/warp/public/503/2.html Denis -Original Message- From: Leon Bass [mailto:[EMAIL PROTECTED]] Sent: Friday, August 11, 2000 10:10 AM To: [EMAIL PROTECTED] Subject: ADDITIONAL DRAWINGS FOR VISIO At one ti

Re: Great CCDA Study Site (CCDA exam length)

If you give a prometric test (English) in a non english speaking country they give you 30 mins extra. regards mike --- Shane McMordie <[EMAIL PROTECTED]> wrote: > This Web site says the new CCDA is 72 questions in > 120 minutes, with 3 > case studies. > > I did CCDA 640-441 2 days ago in Frankfur

Re: BCMSN

I had a few of them. . . not to many and not to complicated. rishard "OLUREMI DAWODU" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hello all, > > I have the BCMSN on sunday and I was wondering if > anyone out there who has taken the test knows if yo

RE: SDSL statement : True or False ?

Sigh, why do ppl make such assumptions? Actually, Netopia tries to make their equipment work with everyone they can. When I worked with one of the larger DSL ISPs in the DC area they were very helpful. You could call them with an issue and if they could fix the issue without a major overhaul they

CCDA

Hi All i would like to take my CCDA exam next month. Will anyone know when i can get study materials from the WEB. Thank Chan ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupst

RE: pix-to-pix tunnel...somebody make it work!!!

Hi Chris, Thanks for the contact info. BCRAN's ISBN is 1-928994-13-X Promote shamelessly!! We expect it to be available at the beginning of October (it's printing early Sept). Sorry for the delay in getting the chapter back to you for revisions; the tech editor currently has most of the book o

RE: NAT Problems

You can set the amount of time a translation times out and get's cleared. It sounds like yours are sitting around for longer then normal. ip nat translation timeout When port translation is not configured, translation entries time out after 24 hours. This time can be adjusted with the above com

Checkpoint question

Hi: Do any of you have any experience with the Checkpoint training. Is it worth it? Thanks, KF ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and No

CSU/DSU manufacturers

Hallo, I'm looking for manufacturers of E1 CSU/DSU's. Can anyone recommend any ? Rob [EMAIL PROTECTED] --- Brought to you by Ananzi Mail http://mail.ananzi.co.za ___ UPDATED Posting Guidelines: http://ww

Re: Checkpoint question

Hi: If you are from montreal, Maxon offert a good course , basic and advance one about Firewall 1 Yves R. [EMAIL PROTECTED] wrote: > > Hi: > > Do any of you have any experience with the Checkpoint training. Is it worth > it? > Thanks, KF > > ___ > UPDATED Post

Help needed with IPSec and NAT Configuration

Hi Group, I gave a question regarding IPSec and NAT configuration. I am trying to configure IPSec between a 3640 and 1605. The diagram of the network is shown below: -- -- || 150.26.154.249/30|

RE: ATM Lane & Gigabit Ethernet

I will just send this about a security vulnerability we found out about in our implementation from 10 MB broadcast domain to a 3 layer model switched and routed network with Gigabit backbone... Jim Cisco Gigabit Switch Routers (GSRs), when used with configured Fast Ethernet/Gigabit Ethernet ca

Cisco 8540

Hey all, Can a Catalyst 8540 handle 5 OC-3 ATM ports and also 2 Gigabits Ethernet all at once? Basically, will it have enough horsepower to do ATM Switching and Routing? Thanks, Evan You - CCNA ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/gui

RE: Switches !!!

a1. How are MAC addresses used on a switch: The MAC address of the switch, depending on the interface being used, handle this in different ways. Some Catalyst switches assign a global MAC address, some switches use a pool of addresses assigning one to each interface(You can assign one manually),

AVVID Certification

Is AVVID part of CCIE Lab? Or is their a separate AVVID certification? Thanks, [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and No

2 Ethernet ports in a Router

What is the main purpose of having 2 LAN ports in a Router? Please reply to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondi

RE: Checkpoint question

IMHO Its not worth it unless you just want to add the title of CCSE, CSE to your signature. If you know your stuff regarding firewalls you won't need a cert. Besides how good can a CCSE be when its only generally a 5 day course in which the pass ratio is about 95%? Doesn't mean someone knows c

Re: CSU/DSU manufacturers

Try ADTRAN or KENTROX. ""Rob Mattews"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... | Hallo, | | I'm looking for manufacturers of E1 CSU/DSU's. | | Can anyone recommend any ? | | Rob | | [EMAIL PROTECTED] | | |

ccie design written

Has anyone taken this yet? Harder than CID? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: 2 Ethernet ports in a Router

The main purpose is so that you can route between two LAN segments. ""Khwaja N"" <[EMAIL PROTECTED]> wrote in message 8n179k$1du$[EMAIL PROTECTED]">news:8n179k$1du$[EMAIL PROTECTED]... | What is the main purpose of having 2 LAN ports in a Router? | Please reply to | [EMAIL PROTECTED] | | | _

Thanks to Group Members

Hello Group, I have finished CCNP. It's all because of support and encouragement I got from many members of Groupstudy. I am very thankful to you guys. I am up to CCIE Written now, and hopefully will be going after a full- time cisco job, after I am done with written. This world looks a lot b

RE: CCDA

There are several good books. Todd Lammle puts out a good CCDA book and also there is a very good book that follows the objectives pretty good on CertificationZone.Com. I think it is 19.95 for that one. -Sean Odom Coriolis Author www.TheQuestForCertification.Com

RE: Switches !!!

Hey Sean. This is regarding the following passage taken from the your previous reply to this thread: If C. If the destination and source node reside on ports assigned to different VLANs on the switch, the switch requires an external router to resolve the address and send the packet back to the

RE: cat5 series switch

Hi Ron and Karen, The Catalyst 2926G, 2948G, 2980G, 5000 and 6000 Family use the Set/Clear based IOS. The IOS called this because a majority of the commands start with set, clear, or show. The cheapest way to get this IOS is to put the Enterprise Edition IOS on a 2926G. Many of these are coming

Re: Preventing password recovery

Open the router and unplug the console port. Plug it beck in when you want to use it. "Michael Fountain" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Well, I put the question to Cisco's open forum Q&A board, and got about the > same answer there - it can't

RE: 2948G-L3 troubles

I'm quite sure I'm doing something wrong. I'm going to clear the configs on both the L3 and the 2948G and take it step-by-step. I'll let you know where I made the mistake. Thanks, Lorenzo >From: "Rampley, Jim" <[EMAIL PROTECTED]> >To: 'Lorenzo Montezemolo' <[EMAIL PROTECTED]>, >"'[EMAIL PR

RE: CSU/DSU manufacturers

Rob; following is a partial list of csu/dsu that i have: 3COM, ADC KENTROX, ADTRAN, ASTROCOM, BayNetworks, GDC, MOTOROLA, NETOPIA, OpenRoute, Paradyne, SYNC, TELINC, TYLINK, LARSCOM, CISCO, ORION, Visual Network, Wescom, VINA T1. basically, you need to research their websites and find what you

RE: Thanks to Group Members

Congratulations Maria! You seem like a good hearted person and I hope you well! Rob -Original Message- From: Ms. Maria [mailto:[EMAIL PROTECTED]] Sent: Friday, August 11, 2000 9:07 AM To: [EMAIL PROTECTED] Subject: Thanks to Group Members Hello Group, I have finished CCNP. It's all b

Re: Checkpoint question

I wouldn't actually recommend checkpoint to any client. Check out some of the hacker sites to see how easily it can be breached. If you need more info let me know. >From: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Checkpoint question >Date: Fri, 11 Aug 20

global knowledge NETGUN Program

Anyone has take that? and how about the Advanced CCIE Preparation Program (ACPP)? Anyone take that? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct a

Re: Ethernet Troubleshooting Woes

Do both the file servers adn the PCs use same the primary IPX frame encapsulation? Also, try this: Pick a PC, and patch it directly into the NIC of the server (that is, make a cross over cable, and path the drop from the PC to the drop for the server). You'll remove alot of factors from teh equa

I s groupstudy down?

Is groupstudy down ? Larry __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subsc

Openview default object colors

Hi, I am wondering if somebody knows what is the meaning of different colors used in openview maps. Probably colors can be manipulated but what is the default color scheme used on the maps. If object color is green - up red - down brown - ??? I am particularly intereste

RE: CSU/DSU manufacturers

Rob; following is a partial list of csu/dsu vendors that i have: 3COM, ADC KENTROX, ADTRAN, ASTROCOM, BayNetworks, GDC, MOTOROLA, NETOPIA, OpenRoute, Paradyne, SYNC, TELINC, TYLINK, LARSCOM, CISCO, ORION, Visual Network, Wescom, VINA T1. basically, you need to research their websites and find w

Re: Your Switching Exam Prep

Carl, I am glad you liked it! The Switching Black Book won'e be done until October. I have put it on hold for a few weeks to finish the Routing Study Guide with Todd Lammle. We just finished the Remote Access Study Guide together. I am an instructor for Todd Lammles training school, Globalnet T

Re: I s groupstudy down?

No. ;-) "Larry Osei-Kwaku" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... | Is groupstudy down ? | | Larry | | __ | Do You Yahoo!? | Kick off your party with Yahoo! Invites. | http://invites.yahoo.com/ | |

Your Switching Exam Prep

Sean, I just wanted you to know that I got your book and used it to pass the Switching Exam. You and Doug did so much better at describing the switching and putting it into plain English than the Cisco Press book did. I can't wait until your Switching Black Book comes out! Are you going to b

Re: Checkpoint question

If your referring to what Dug Song did (http://www.zdnet.com/sp/stories/news/0,4538,2610719,00.html) you should be advised that this was done on off the shelf install and should not be compared to a properly configured firewall. If your company can't afford a Pix then Checkpoint would be the w

RE: Switches !!!

What Sean implied here is you will always need a router to route between VLAN's. I thought you could use a router (router on a stick)OR a RSP. He claims that the initial route needs to be found by a router and then the RSP can take over. I still have a problem with this concept because I have

Cisco Design good book

Who knows of any good book for designing Cisco networks. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/l

RE: Cisco Design good book

Does the name Priscilla Oppenheimer ring a bell :-> Top Down Network Design The book of the name you mentioned below would be a third choice. For more general ( and also specific ) high level design education, you can't beat Howard Berkowitz' Designing Addressing Architectures this book has a

RE: ISDN problem

Two things 1. This is a PPP error, not associated with ISDN part at all 2. Protocol x8031, according to RFC 1331 (PPP protocol), is a Network Connection Protocol, the portion of the PPP setup that negotiates Layer 3 protocols. and is specifically associated with "

ACLs

Is there away to make an access list to only allow telnet from the serial interface (ex: the /30 address on that interface) or default gateway, if the ip address or gateway isn't known. I want to know this because I have about 500 routers I need to put this on and I want to tftp a standard config

Thanks to Group Members

Congrats. Hard efforts should pay back now. But the world is not that way. I had finished CCNP in March and have also finished CCIE written, but unable to find an entry level job. That is how the certified people without exp are treated in Toronto (Canada). My best advise would be try to gai

Access list

Hi all, I have a router that has 2 ether interface - 0 and 1. 0 connect to outside and 1 to inside. I set up an access list like below: access-list 101 deny any any interface Ethernet0 ip access-group 101 in I expect that will only allow applications like web browser initiate connection from i

RE: 2 Ethernet ports in a Router

1) Large number of users at site. Segment network to create seperate broadcast domains. 2) Security. Access lists can limit traffic between interfaces. For example: HR and Finance on Ethernet0 are not accessible to other users on Ethernet1. > -Original Message- > From: Khwaja N [mailto:[E

RE: Switches !!!

Fred Switches even with an internal route processor cannot take the place of a router. The first packet in Multilayer switching is resolved by the external router. The internal route processor learns from the forwarding decision made by the external router and then uses that resolution for the r

RE: Switches !!!

I've just been doing some research for a customer proposal. What I have found is that the Cisco's so-called layer three switches will natively route RIP, but if you want more capability you pay for a software enhancement that will permit OSPF, IGRP, and EIGRP, or in other words, turns the L3 switc

RE: Switches !!!

You will always need to have a router or a route processor to router between VLANS. At least with current technology. Layer 3 switching is really just being able to processes a route and then forward at switch or wire speeds. It still needs to process a route, and is routing between lan segments.

RE: Thanks to Group Members

Congratulations Maria - best wishes for the future. Have a great weekend, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] -Original Message- From: Ms. Maria [mailto:[EMAIL PROT

Reference and Preparation for CCDA

See this link for exam objectives and preparation. http://www.ccxxproductions.bigstep.com/ Tom Milliner, CPA, MCSE+I, CNE Greater Dallas Association of REALTORS 8201 N. Stemmons Frwy, Dallas, TX 75247 [EMAIL PROTECTED] www.dallasrealtor.com Phone: 214-637-6660 CCxx Productions -

RE: 2948G-L3 troubles

Your right about putting the bridge groups on the subinterfaces. It just didn't look right to me when I first looked at it. After reading the doc CD I agree with you. You should be able to do a show vlan on the 2948G-L3 and see all the vlans from the 2948G. Jim -Original Message- Fro

Re: Teltone ILS-2000 SPID & LDN Numbers

Brad, Do you know where I might get a ISDN simulator? <[EMAIL PROTECTED]> wrote in message 8mub12$7kt$[EMAIL PROTECTED]">news:8mub12$7kt$[EMAIL PROTECTED]... > have you tried looking on Teltone's site? that might be a really good place > to start. > > -brad > > port 1 > 0835866101 / 8358661

RE: SDSL statement : True or False ?

SDSL is not a true standard. It's a "industry standard". If the ISP uses CooperMountain at the DSLAM (CO), then you have to use CopperEdge certified products. xDSL is a mess right now because of the number of current and upcoming "standards". Cisco is a little behind as far as DSL. I was AMAZ