Router- As400 - connectivity

Hi Group Just to share with you, a few days ago on the 27th I had asked ofr help regarding the AS400. Now it seems like presently the problem is solved. The AS400 team increased the MTU on the AS400 box to 4096 and it seems to work okay. This is very strange because the mtu defined on our rou

RE: Tacacs and dialup authentication

This is a valid comment, but when a go into routerA, type 'no aaa new-model', it works, which would eliminate the possibility of a password problem. > -Original Message- > From: Gareth Hinton [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday 28 March 2001 22:43 > To: [EMAIL PROTECTED] > Subjec

Re: trunking

802.1q doesn't support multiple spanning trees, but many vendors have added their own support which may or may not interoperate well with other vendors. YMMV. 802.1s will which is at draft 9 (march 9 2001). To my knowledge, I don't know of any vendors with support for it at this time in it's dr

RE: Tacacs and dialup authentication

I probably should have outlined the reason for this type of configuration. The problem I am trying to solve is this - I want to use a remote tacacs server for telnet authentication, but I want to use the local database for ppp authentication (it would be a pain to add all the router names into t

C1603 Time-Range not available

Cisco 1603 Does anyone know how to implement time restrictions via an access list, I know there is a time-range command on the latest release of the IOS, but I don't have the luxury of being able to load the IOS as the router is on a remote location. I want to restrict DNS during out of office

Re: Loopback Interfaces

1. Basically loopback address is used to test whether tcpip protocol stack is installed properly and working fine on a machine. Assume that just now you have added tcpip to your machine and there is no ip address assigned at that time one can use looopback ip address to verify the tcpip installa

VLAN and Cluster

I am trying to configure several cat 3500 as one cluster group over Giga-stack. However, I found the Giga-stack do not pass the VLAN information. I could only access VLAN1 cross switches. Is there any configuration issue? If I do not user cluster, and configure Giga-stack as trunk port, there is

VLAN routing in Cat6000

I am trying to configure VLAN routing in Cat 6006, (Super engine does support routing). However, after I configure interface VLAN2, it said VLAN 2 is shutdown. it's no use to issue 'no shutdown' command. How should I configure it? _ FAQ, list archives, and sub

Re: EIGRP clarification

For the purposes of the exam EIGRP is a DV protocol. Vijay Ramcharan - Original Message - From: "Rizzo Damian" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, March 28, 2001 10:06 PM Subject: EIGRP clarification > > Preparing for my BSCN exam, I have found myself unclear

Re: trunking

Another issue to consider is the fact that if IP telephony will ever be implemented (Cisco's anyway), dot1q trunking has to be used, negating the use of ISL. A recent implementation has emerged called MISTP (Multiple Instance STP) that supposedly supports multiple spanning trees over the dot1q pr

Re: problem with installing vpn 3.0 client for win2000

I've installed 301k9 twice now on Win2K Pro and have never had any problems (apart from the fact that it doesn't work with our PIX and I didn't find that out until I read the documentation). I've also installed or tried to install the VPN 5K client, the VPN 1.1 client and whatever else Cisco has,

DNS problem?

A funny thing is happening on our network and it has us stumped. 1 - Some websites are not reachable by typing the hostname in a browser (i.e. www.yahoo.com). 2 - Some websites ARE reachable by typing the hostname in a browser (i.e. www.altavista.com). 3 - When I ping the unreachable addresses th

RE: EIGRP clarification

In BSCN course it appears as a ADVANCED DISTANCE VECTOR routing protocol. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 29, 2001 1:19 AM To: [EMAIL PROTECTED] Subject: Re: EIGRP clarification > Preparing for my BSCN exam, I have found

Re: DNS problem?

one possiblility ...DNS server cant talk to the root servers but is resolving some addresses from it's cache. If that's the case then before long (depending on how your DNS server is configured) all the entries will age out and no names will be resolved. your pings timing out is not uncommon accr

2511

Hello Friends, I am planning to buy this router. What's the fair price? Your comments appreciated. 2511 16F/32R 2 Octal Cables + Rack Hardware 68030 Processor - Revision M 16384K bytes of processor board system flash (read only) Thanks RamG _ FAQ, list arch

Re: OSPF Asymmetric routing with 2 ABRs per area

>Hi all, > >Need to find out if there is a method for avoiding asymmetric routing >between 2 areas both with 2 ABRs and equal capacity links (E1 - 2.048Mbps). First, what is the problem you are trying to solve? Asymmetric routing is a reality in most hierarchical networks that use dynamic rou

Re: 508-CS versus 2509/2511

What is considered a good IOS version for c2509rj ? ""EA Louie"" <[EMAIL PROTECTED]> wrote in message 99un8a$hek$[EMAIL PROTECTED]">news:99un8a$hek$[EMAIL PROTECTED]... > hmmm... if you have access to the 508-CS, it's old, but if its running 9.21 > then many of the minimal features of the 2509/1

Buffer

I have a condition when 1 system is attempt to hand a packet to a transmission buffer and no buffer is available a.Fast switching b.intput drop c.output drop d.route-cache Thanks Koliy Get free email and a permanent address at

actual speed (BW) on a Frame-Relay circuit

Hi, is there a command to check the actual speed (BW) or max BW used on a Frame-Relay circuit. Thanks, Tarry. -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco

Token Ring Problem

Hi; My cisco 2521 token ring interface has problme, the interface keep intialize, never up. Would like to hear an advice? 2:51:25: %TR-3-OPENFAIL: Unit 0, open failed: Phys. Insertion, ring beaconing 02:51:25: %TR-3-BADSTART: Unit 0, Start completion and wrong idb state - state= 0 02:51:26:

1705 router ios software

Dear all, This is in connection to my previous mail with subject Erased Flash. I am very much thankful to all of you for giving me various methods of so= lving the problem, but my main problem is I do not have the IOS to load it from= tftp or to load through xmodem from rommon prompt. Pls let

ISDN BRI Channel Separation

Hi Group!! I would like to know if it's possible to separate the two ISDN B Channels so that one remains active whilst the other one is free. I have checked on the Cisco web site and Cisco press books but could not find anything on how to configure the BRI Channels separately. Can someone pls s

RE: My CCNA test -Tips to follow

Drop the s in the middle ... www.sureshhomepage.com Thanks! TJ -Original Message- From: Jack Nalbandian [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 27, 2001 15:11 To: [EMAIL PROTECTED] Subject:RE: My CCNA test -Tips to follow Paul, The Suresh link didn't work

RE: PIX Performance

Although I agree on the PIX being able to handle the load; other considerations may include: * The traffic from the DMZ though the PIX to the internal servers ... depending on how their applications/web servers work in conjunction with the db servers there could be significant load there Of cours

Re: CCNA

The best source is Cisco's web site. Since Cisco does change its = certification requirements periodically. Listed below are the tests = needed for the various certifications in the "Routing and Switching" = field. Cisco has other fields of certification, but it seems that = "Routing and Switch

RE: UPDATE: OSPF overriding 'no ip classless'

Interesting :) And, of course, if it were a designed feature, it should be documented. Someone should call this in. - Tks        | BV    | Sr. Technical Consultant,  SBM, A Gates/Arrow Co.

Transparent Bridging and DHCP

Here's the problem... I have a 3640 running 12.1.5YB with an OC-3 and Fast-E. I have about 200 pvc's defined as point-to-point and belonging to bridge group 1. The Fast-E is also a member of Bridge group 1. I also have the router configured to be a dhcp server. My problem is that the device o

Free Training Materials for CCNA, CCDA, CCNP, CCDP and CCIE

http://www.gdd.net Clayton Dukes CCNA, CCDA, CCDP, CCNP _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

RE: Implementing SSH on Cisco IOS

Karl, If the question is "why don't you use tacacs instead of ssh?", the answer is: 1) Tacacs+ only encrypts between the NAS (router) and the Tacacs+ server, the username and password are still passed in clear-text between the telnet client and the router. 2) They're not mutually exclusive.

Token Ring Question

For I am not familiar with TokenRing. I just wondering how come i insert 2 router into the token ring hub, one of the interface is up/down all the time. Thanks Vincent _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report m

Re: PIX+Router+Frame relay to internet

Murat, My comment is don't do this. It violates a very fundamental principal of network security, "keep your untrusted and your trusted networks physically separated". There should also be no way for an untrusted network to bypass your firewall, which there is in this design. There are l

Re: FW: UPDATE: OSPF overriding 'no ip classless'

Well, there are two different issues. You're talking about the way the routing protocols themselves behave: whether they pass subnet mask information or not. The issue here is routing table lookups, not how those routes are installed. With 'no ip classless' configured, even if there is a vali

Re: actual speed (BW) on a Frame-Relay circuit

This is actually more complicated than you think. :-) Which do you want to know, the speed of the link or the available bandwidth? If it's the latter, what do you mean by available? Do you want to know the CIR? Or how much you can burst over your CIR? Let's say you have a frame relay T-1. T

Rommon on AS5300

I rebooted an AS5300 in my lab and it went into rommon. History: CCO has been usless with these errors by the way. I have been through all rommon commands and have tried reloading the image through xmodem, but I get a "transfer cancelled by remote user". ( I have successfully done this before) Th

Re: Advance Cisco PIX Configuration Exam - Passed!

Hi I am implementing PIX firewall. Can u recommend any Cisco course or books for in-depth PIX exam preparation? Thanks "Richie, Nathan" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I passed the Advance PIX configuration exam last Friday. Second time is a

Re: Asymmetric routing with 2 ABRs per area

Look into policy routing. Also, don't forget OSPF prefers intra-area routes. Example: r3 / \ r1---r2 r1 to r2 is area 0 - Fast Ether r1 to r3 is area 1 - 128k line r2 to r3 is area 1 - T1 line Traffic will go from r1 to r3 instead of r1 to r2 then r3. To get it to go from r1 to r2 to r3 you

RE:

Can you identify the type of DOS. What IOS is he running? If this is a known bug is there a cisco bug track ID on it? Thanks Drew -Original Message- From: Sean Young [mailto:[EMAIL PROTECTED]] Sent: Wednesday, March 28, 2001 2:57 PM To: [EMAIL PROTECTED] Subject: Hi everyone, I have

Re: How do I backup the existing PIX ios 4.2 to a tftp server?

Thanks for replying Gary. It looks as though 'copy' is not a valid command for version 4.2(2). I used the write net command to copy my config to a tftp server, but how do I backup the ios and not the config? Also, I have only one activation key for version 5.1(4), isn't that all I need? Thanks

Re: 2509 image (was 508-CS versus 2509/2511)

3 things to consider when asking for the 'good' IOS version to use: 1. what purpose is the termserver going to serve? 2. how much flash is onboard? (although apparently you can use a compression utility to squeeze a larger image into smaller flash) 3. what features do you want to want to use/e

RE: Routers can't ping own interface

When I did a search, I didn't find a good answer right away but here is what I did find. Question: What is required to make pinging a local or remote interface work? Answer: You must have a running Cisco router,

Re: using cisco cd without CD????

I would like to copy the CD to my HD so I don't have to take my external CD drive with my laptop. Does anyone know how to do this? -- Hugo [EMAIL PROTECTED] ""Groupstudy"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Sounds like it was installed on a network

Re: PIX+Router+Frame relay to internet

What exactly are you trying to do? I"m a little vague as to the layout. Is the other pvc in your office or a branch office on the frame-relay? If it's in another office and you're trying to get internet connection, the PIX needs to be at the location with the internet pvc to keep traffic separa

Re: Cisco PIX has been brought to its knee

Not making accusations, but it's ironic that this story came out just after we had a debate about this ;) Just giving you a hard time..hehe. No flames...just kidding. Seriously. ;) You're a kewl guy but I'm kewler..haha. Hey why didn't he just block their IP? Seems like a lot of work to build

RE: FW: UPDATE: OSPF overriding 'no ip classless'

Excellent !! This is like the Energizer Bunny! Hmmm. You already tested adding a static default route (with lower admin distance) and it changed the classless behavior, right? Then you deleted the static and classless returned. Just for completeness :) , it might be mildly interesting to add the

RE: Token Ring Question

Both routers have the same ring speed? Verify the cables. Verify the MAU. Divide a problem into smaller parts. Then test each part. Substitute a questionable item for a known good item. If the new arrangement now fails the questionable item is defective. Conversely if the new arrangement works the

Cvoice

For you guys and girls that have CVOICE specializations. Do cisco send you a certificate or card for passing the CVOICE? __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text _

RE: FW: UPDATE: OSPF overriding 'no ip classless'

One thing I didn't try, which you might be alluding to, is allowing OSPF to advertise the default (which was causing classless behavior) but then also manually add a static default on router B. I have not tried that yet. I did try the manual static default route without OSPF advertising the defa

Re: Can we find the PC's IP address connect to particular switch port?

Identification of PC's Q1 - you can get the IP address of the PC if you know the MAC address of the NIC in the PC. That MAC address/PC mapping is a good table to keep somewhere, where you associate the MAC address with an office location (especially if you're using DHCP and assigning dynamic IP

Re: IT Career Academy?

That's a good joke any way you slice it, Howard. "Howard C. Berkowitz" wrote: > >Mask Of Zorro wrote: > > > >> > >> only written tests... Anybody with enough time to read all of the exam crams > >> and study guides for these exams can pass them. > >> > >> Can that same person be of much use i

RE: Token Ring Question

If you are atempting to plug two Token-Ring cables into one MAU, just make sure both of those interfaces are on the same network (Which really wouldn't give you much), But just to test this, get two MAU's do not connect them to any part of your network, place one cable in one MAU and the other cab

Re: Cisco Terminal server - does anyone know other options??

Perhaps an old Livingston PM-2? Bri On Tue, 27 Mar 2001, KP wrote: > Does anyone know of another option for a terminal server outside of a CS-5xx > or 25xx. I would love to put a terminal server off my cable modem > connection (legal IP address) and be able to reverse telnet from it.

Cannot see the Serial Interface at all..

I have a Cisco 2524 with an removable T1 card while cisco is booting it says service-module check passed but when i see the interfaces it just has the Ethernet NO serial interface at all... tried removing/replacing no luck Any help greatly appreciated. Thanks Satish ___

Re: Routers can't ping own interface

To all who offered to help by looking at configs etc, thank you. One of my "helpful" co-workers decided to load a backup config on the routers in question last night thereby blowing away my config. On top of that another co-worker blew away the workstation holding the config I had made along wit

RE: Cvoice

When I was pass my CVOICE exam, I've got nothing... :( ___ WBR, Dmitry Kuzin. CCSI#22706 CompTek Int. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ruddy Cordero Sent: Thursday, March 29, 2001 8:58 PM To: [EMAIL PROTECTED]

IP Movie -- Warriors Of The Net

For those who liked www.routergod.com check out www.warriorsofthe.net They have a move about how IP works. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/?.refer=text ___

Re: Advance Cisco PIX Configuration Exam - Passed!

The best way to go about this from what I can tell, is to go on CCO and get the config guides in the documentation section. If this is your first install you may get confused. If you like send some detail on your config and I can give you a list of commands to look at. Moe. --- GNOME <[EMAIL

Re: Cisco PIX has been brought to its knee

Ok, hope Sean doesn't get his feelings hurt but here a bit of my Criminal Law School training coming out: Given the fact that you (Sean) were going to any means to "prove" that a Linux based firewall is better than a PIX for the last week or so, this email of yours has very little credibility. Y

Re: Cannot see the Serial Interface at all..

I have the same router, same T1 card. Is this a new unit, was it ever working? When I do a "show int", I get the following output Serial0 is up, line protocol is up(This is my T1) Hardware is HD64570 with FT1 CSU/DSU Serial1 is administratively down, line protocol is down(Thi

Re: PIX+Router+Frame relay to internet

At 9:17 AM -0800 3/29/01, [EMAIL PROTECTED] made some very interesting points: >Murat, > >My comment is don't do this. It violates a very fundamental >principal of network security, "keep your untrusted and your trusted >networks physically separated". In the classified world with RED/BLACK is

FEC and multi link trunking

are they pretty much one and the same thing? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: Routers can't ping own interface

With co-workers like those, who needs enemas? Z >From: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: Routers can't ping own interface >Date: Thu, 29 Mar 2001 12:24:14 -0500 > >To all who offered to help by looking at configs etc, thank you. One of my >"help

Re: EIGRP clarification

Look at all those routing technologies - they are all different; except *that* one, it's the same... Z >From: "Howard C. Berkowitz" <[EMAIL PROTECTED]> >Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: EIGRP clarification >Date: Wed, 28 Mar 2001 23:19:21

Re: Routers can't ping own interface

Well ,after all, our IT motto is Ready, Fire, Aim... :) "Mask Of Zorro" <[EMAIL PROTECTED]> on 03/29/2001 01:18:36 PM

RE: VLAN routing in Cat6000

You must have at least one active switch port in VLAN 2 in order for the interface to come up. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel ma Sent: Thursday, March 29, 2001 5:03 AM To: [EMAIL PROTECTED] Subject: VLAN routing in Cat6000 I am t

Re: EIGRP clarification

>Look at all those routing technologies - they are all different; >except *that* one, it's the same... > >Z Are you quoting Yakov Rekhter: "at a sufficiently high level, everything is the same?" Not sure I follow your point. > >>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]> >>Reply-To: "Ho

Re: Buffer

Koliy, my guess is output drop. rahul - Original Message - From: "KOLIY" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, March 29, 2001 5:41 AM Subject: Buffer > I have a condition when 1 system is attempt to hand a packet to > a transmission buffe

Re: Ethernet address question

>From a NetWare Connection article by Laura Chappell: Node Address 1 (6 bytes) -- This field contains the MAC address of the network interface board that is attached to the network with the address defined above. (Node address 0x00-00-00-00-00-01 always belongs to the internal IPX network.) De

Re: 508-CS versus 2509/2511

Hi Yes these are good boxes. As far as I know (anyone taken the lab correct me) the 2511 used in the lab is just for reverse telnet access to the rest of the rack and is not used in the labs. So the ability to run IOS above 10.3 shouldn't matter. Note, you will have to TFTP boot 10.3 for find the

Wireless T1 WAN backup

Hi Everyone, Have anyone experienced with Wireless T1 WAN using as a backup link? Please shed me some light or give me your comment. Thanks in advance. Kim. __ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.ya

RE: Advance Cisco PIX Configuration Exam - Passed!

Well, I've looked there, at the CCO, and the documentation I've found is 'ok'. By 'ok' I mean that you *can* successfully set up the PIX from those docs. The PIX, however, isn't there for just NAT, it's there to help secure your network. To that end there seems, to me, to be very little in the w

VPN 5001 concentrator

Here's the problem: 2 clients,both sharing a DSL line. both use VPN client for 5001 When one is connected it is fine and if you add another connection off the same dsl while the other computer is connected, the VPN tunnel keeps dropping. Any ideas ? _ FAQ, list

CCDP or CVOICE Advice

I just finished by CCNP and I would like to go ahead with my CVOICE = specialization. I work for VoIP company and it would help me a bit to = have but CVOICE is going to be eliminated and there is no cert. or ID to = recognized you as having a voice specialization. My question is: Should = I conti

Re: Routers can't ping own interface

>With co-workers like those, who needs enemas? > >Z > > >>From: [EMAIL PROTECTED] >>Reply-To: [EMAIL PROTECTED] >>To: [EMAIL PROTECTED] >>Subject: Re: Routers can't ping own interface >>Date: Thu, 29 Mar 2001 12:24:14 -0500 >> >>To all who offered to help by looking at configs etc, thank you. One

RE: CCDP or CVOICE Advice

Since you're in the groove, you could just take your 2 exams and get the CCDP. I did the same and finished CCDP in a couple of months. Vijay Ramcharan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ruddy Cordero Sent: Thursday, March 29, 2001 2:18 PM

Re: CCDP or CVOICE Advice

I have my CCDA so all I need is CID. So you think that CVOICE is not worth taking the test for. I just started reading the book but If I don't have to I wont take the test. - Original Message - From: "Vijay Ramcharan" <[EMAIL PROTECTED]> To: "'Ruddy Cordero'" <[EMAIL PROTECTED]>; <[EMAIL

RE: VPN 5001 concentrator

I actually have a similar problem. I connect to a PIX firewall which is the VPN server, from home. If I connect through Mindspring or other ISP, I have no problems connecting and authenticating against the PIX. If I dial in to a RAS server which has Internet connectivity via a DSL router (which

RE: CCDP or CVOICE Advice

well, I guess it depends on what is more important to you. I personally would go for the one that interests you and not worry about a "paper certificate" as much. But that is just my .02 cents. Heather Buri CSC Technology Services - Houston Phone: (713)-961-8592 Fax:(713)-961

Re: VPN 5001 concentrator

NAT and IPSec/UDP 500 conflicts? (do the workstations have their own external IP addresses?) -e- The.Rock <[EMAIL PROTECTED]> wrote in message 9a060t$7km$[EMAIL PROTECTED]">news:9a060t$7km$[EMAIL PROTECTED]... > Here's the problem: > > 2 clients,both sharing a DSL line. both use VPN client for 5

voice port OID.

Hi All, I need to monitor the status of voice ports on 3810 and 7204 routers using snmp. Does anybody know where I can find the voice port OID? Thanks. Paulo Roque _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misc

Re: CCDP or CVOICE Advice

Woohoo! Another 2 cents! - Original Message - From: "Buri, Heather H" <[EMAIL PROTECTED]> To: "'Ruddy Cordero'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Thursday, March 29, 2001 1:47 PM Subject: RE: CCDP or CVOICE Advice > well, I guess it depends on what is more important to you

Cannot see the Serial Interface at all..-------Fixed

I got this fixed What i ended up doing is i made the router boot from ROM which detected the Serial0, I configured from the ROM and then upgraded the IOS and then when i reboot it boots fine and sees the serial card in it.. Thanks a lot guy for your replies.. > -Original Mes

ot: Is Flash = Flash

Is the 16MB flash module for 6400 = 16MB flash module for 2600 Is MEM-NRP-FS16M = MEM2600-8U16FS Get free email and a permanent address at http://www.amexmail.com/?A=1 _ FAQ, list archives, and

BGP over two ISP links

Hi, All, Here is a quick question: We are planning to run BGP over two ISP links to provide loading balance. But we were told that we will run into major problems if we do not have full class Cs on both ends. Could somebody make comment on this? Thanks Ruihai

Re: problem with installing vpn 3.0 client for win2000

I installed on 2000 pro and did not have any problem. You have the correct file. vpnclient-win-301Rel-k9.exe Ruihai "Frank Kim" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi folks, > Anyone has any success on installing the cisco vpn 3.0 client for win200

RE: BGP over two ISP links

The ISPs don;t tend to accept route advers via BGP less than a /24. Some do, but it has become some kind of a "standard" If they allowed smaller route ads then the full BGP route table would be way too large. Moe. -Original Message- From: Ruihai An [mailto:[EMAIL PROTECTED]] Sent: Thur

Token Ring Tool WAS Token Ring Problem

I've heard about those zapper tools for MAUs but have never seen one. Is there an official name for it? Any manufacturer or part number? Might be worth finding on eBay. I have several old MAUs that I haven't tested. TIA > -Original Message- > From: ElephantChild [mailto:[EMAIL PROTECTED]]

RE: VPN 5001 concentrator

You can;t do VPN through a PAT (many-to-one NAT, NAT overload, NAPT or whatever it's called right now.) There some exceptions... but that should be a safe rule to go by. Moe. --- Vijay Ramcharan <[EMAIL PROTECTED]> wrote: > I actually have a similar problem. I connect to a > PIX firewall which

RE: DNS problem?

We have this happen on our dns servers. I don't know what you're running but normally a cleaning of the dns cache does the trick over here. Samuel Hebert Network Administrator Cisco Certified Network Associate Great Minds Discuss Ideas; Average minds discuss events; Small minds discuss people.

Re: ISDN BRI Channel Separation

Hi, If you configure your router without a threshold statement only one channel will come up. The channel it choses is dependant on the ISDN switch as I understand it. You can configure the BRI to place two separate calls. Teunis Hobart, Tasmania Australia On Thursday, March 29, 2001 at

URGENT: regarding VoIP

Hello guys Greetings.. I have my CCIE Exam on April 10 and 11. I need your urgent help. I am trying to setup a Voice over IP. Well everything works fine. When I put access list on one of the router to act as a IOS firewall, I can't make calls. Here is a sample access list access-list 140 pe

Re: BGP over two ISP links

At a minimum you're going to need a single /24, not two. You would announce this prefix on both connections. You're also going to need to apply for an autonomous system number from ARIN. Details can be found at www.arin.net. I'm wondering what you're really trying to accomplish. If this extr

Can you have more than one SPAN port on Catalyst 6505?

We need at least two SPAN ports on each 6505 switch to connect our IDS and Sniffer. When we config the second SPAN, it always overwrite the prevously configured SPAN port. It seems you can not configure more than more than two SPAN on one switch. I am not sure if that is true. Thanks Ruihai

ASN18506 up and running

It's been delayed time and again, but I've finally found the time to push through the docs and configuration notes needed to get our ASN up and running with our upstream providers. So, this morning we began announcing ASN 18506 and our netblocks out Sprintlink with no problems. I had them turn o

Re: 1705 router ios software

You can download the IOS from Cisco web site if you have a service contract. If you do not, you can download IOS from another 1700 router. Ruihai "Ganesh Chintalapati" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Dear all, > > This is in connection to my

Command to clear the hit counter of Conduit ??

Does any pro know the command to clear the hit count of Conduit on PIX ? Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Re: problem with installing vpn 3.0 client for win2000

The v3 client won't work with the PIX 5.x software. PIX 6.x will support the v3 client. For now, I rolled back to the Win2k 2.5 beta once I found that out. Rumor has it that the v3 client will also work with upcoming IOS releases. -- Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+ L

Re: 1705 router ios software

Whenever a router is purchased, IOS must also be purchased, even if it's the $15 IP-only IOS. You should have the original IOS available if it was legally licensed (it usually ships a in white box), and comes on CD or sometimes floppies. Worst case, spend $15 and purchase IP-only IOS -- Jason R

BGP default originate

Hi, I have a question regarding this setup EBGP EBGP R1-R2-R3 (100) (200) (300) R1,R2,R3 are all boxes running BGP. in AS 100,200,300 respectively. In R2's configuration neighbor default-originate R2 sends a default route to R3 (ASPATH = 200 )

RE: Can we find the PC's IP address connect to particular switch port?

Sure. Get the mac address and then on the switch do a show cam dynamic. Match the MAC on the PC with the MAC in the CAM. The cam will also list the Vlan and port the mac is assigned to. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Richard spalding Sent

Conduit commands do not allow traffic to pass after 5.3(1)upgrade

after upgrading PIX 520 to 5.3(1) from 4.4 conduit commands do not allow = traffic to pass=20 I have to configure access-list and access-group for traffic to pass is = there a command to enable the conduits ? are there any other things you need to add to your old config after = upgraded to 5.3?

  1   2   >