Hi,
passed all four for CCNP, in past 4 weeks, I must thank this groups, and
some of the discussios, and helpful information...
with a weeks rest, like to go in for CCDP, I already have the exam
certification guide , from Cisco Press, does any body have pointers in Cisco
web site...for the s
Hi Friends,
My CCNA is over, and Iam preparing for CCNP now. Iam interested buy 2 1601
router's with transceivers, console cables, back to back cables I cannot
afford anything grand than this right now. (my dream is a couple of 3600's).
Iam located in India.
Thanks in advance.
Hi,
I am preparing for the BSCI exam, but could nopt get any good material on
the ISIS does anybody have any pointer in the CISCO site, which can
provide a comprehensive material ...
Thanks
[GroupStudy.com removed an attachment of type image/gif]
Message Posted at:
http://www.groups
for version
2.0 2001 edition
Arun
[GroupStudy.com removed an attachment of type image/gif]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52094&t=52094
--
FAQ, list archives, and subscription info: http://www.groups
Hi,
I would be taking Remote access shortly, as per cisco web-site the exam
number has changed, has there been any changes in the contents, or is exam
being focused on specifc areas,, like what was done to Switching exam it had
more questions on multicast... and offcourse newer switching platfo
Check this
http://www.anthonypanda.com for memory and cables.
--- Ozzie Sutcliffe wrote:
> talk to Brad
>
> oz
[EMAIL PROTECTED]
=
Arun Upadhyay
CCIE (written passed )
MCSE,CCNA, CNA
__
Do You Yahoo!?
Yahoo! Sports - Covera
Thanks Brad.
--- Brad Ellis wrote:
> Arun,
>
> Hi! The older labs still do include some topics not
> covered on the current
> CCIE exam. Therefore, you could just NOT do the
> configs for those topics
> when you do the earlier practice labs. It should be
>
which
has these topics for configuration.
Thanks.
Arun
__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19175&
#x27;s say R1 is using DLCI 103 and R2 is using 203.
Thanks.
Arun
--- Circusnuts wrote:
> Arun- your just a handful of commands away. Have
> you researched this ???
> The field of commands you are looking for is
> "Frame-Relay Switching," which
> makes your rout
Router R3 and DCE interfaces to Router R1 and R2.
R1---R3-R2
( dce) (DTE) (DTE) (DCE)
Can somebody please tell me , HOW can I configure
this ?
Thanks.
Arun
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
If the clients are on different layer 3 network,
then that should be configured as point to point
network. If they are on same network then they can use
point to multipoint.
I think in the given senerio, it should be configured
as point to point network.
Arun
--- Brian wrote:
> No one
help.
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16490&t=16490
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violati
hi
do uu have a url where they point ot this problem as i need to make sure
that this is the case before saying it to heads
Arun Sharma
""Mike Mandulak"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Yep, that's the version that has t
t; wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > hi
> > i was trying to access the 2900XL series switch through hyperterminal
and
> > strange thing happened ,it got reset by it on.did this happened with
> > somebody else also ,just cu
Check this
http://www.cisco.com/warp/public/625/ccie/ccie_program/ccie_present.html
Arun
--- Leonardo Borda wrote:
> Does anyone know how many CCIE exist around the
> world?
> Does cisco publish that information?
>
> Leonardo Borda
[EMAIL PROTECTED]
=
Arun Upadhyay
Hi
Is it rebooted the switch when u started the KeaTerm term software or it
just rebooted the switch when u plugged in the console cable.If it rebooted
when u started the KeaTerm term try using the windows hyperterminal and see
if the problem occurs again .I think it should not
Regards
""evans
Hi
20.1.1.0/30
10.4.1.0/30
20.1.1.0/24
check above the subnet mask .do see anything there.
regards
""Dave W."" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi there,
>
> I have the following config:
>
> R1750(L) --- R7206 -- R1750(R)
>
> R1750(L):
> S
to ur network and get that synchronized from other
ntp servers around the world and then use this as reference for ur
equipments.you can get some from www.download.com and look for ntp servers
in search query.
regards
Arun Sharma
""Derric Gu"" wrote in message
[EMAIL PRO
Hi
I heard CCBootcamp labs are best for CCIE lab
preparation.
Can anybody tell, where this www.fatkid.com labs
stands in comparison to CCbootcamp labs.
Thanks.
Arun
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
__
Do You Yahoo
Hi
I heard ccbootcamp labs are best for CCIE lab
preparation.
My Question is where this www.fatkid.com labs stands
when you compare with ccbootcamp labs.
Thanks.
Arun
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
__
Do You Yahoo!?
Make
.
regards
Arun Sharma
""Sammi"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'm not clear on which standard I should use for VLAN setup.
> I will be using a 2948G-L3 as a core switch. Connected to the core
> will be a number of 2948xl as acces
hi
try this link
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:PPP&;
s=Implementation_and_Configuration
Regards
""Justin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hey all :)
> Im trying to configure my 1601, to recieve calls via async serial por
Hi
which IOS ver ur using because in older ones u can use
show system and it will show something like this
PS1-Status PS2-Status Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
-- -- -- -- -- -- --
---
ok ok ok
Hi
I have x25 router configured at my office .It has two serial ports coming
from lets say source. the ports being as ser1/1 and ser2/1 and from
this router 2 ports each are connected to two machines working in
redundancy.It like this
Source ports: ser1/1,ser2/1--X25 Address 010102 for se
check this also
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3900/c3930ug/cables.h
tm
regards
""Arun"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hi
> Please check the folowing link
>
http://www.cisco.com/univercd/cc/td/doc
hi
Please check the folowing link
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel7/hrdwrnst/tchw
cabl.htm
regards
""Farhan Ahmed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> cisco.com/go/tools
>
> -Original Message-
> From: Omer Ehsan Dar [mailto:[EMAIL
ccess.
i am really confused i tried reading about it but i cann't find the basic
things ..any help will be appreciated.
Regardss
arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12406&t=12406
--
FAQ, lis
hi
i have IOS 4.4(1) running on my catalyst switches here so the command show
Uptime is 11 days, 8 hours, 31 minutes
thats it nothing else i could have checked this dear.
any other suggestions
regardss
Arun sharma
""Peter Slow"" wrote in message
[EMAIL PROTECTED]&qu
i have 32 MB RAM installed on it i was asking about the issues like ..which
features are resolved in newer relase and which were problem in 4.4(1)
thanks
Arun sharma
""Peter"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> Yo
hi
ur talking about dsl right how far is ur coustomer from ur prmises check
that is it on the right distance ..
Arun
""Mohammed Saro"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> i have a problem with one DSL customer with a speed of 128
stopped for 15 minutes and it is
really big issue for us why it happened ...i think i am totally stuck
..can anybody give a a start .
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12101&t=12101
--
problems
.i think i saw somehting like this on cisco but right now i am unable to
find this .
any help will be appreciated .
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12089&t=12089
--
FAQ, list
I P3 clear request (5) 8 lci 1 cause 0 debug 245
Serial0/0 :X25 I P7 clear request (5) 8 lci 16 cause 0 debug 245
Serial0/2 :X25 I P3 clear confirmation(3) 8 lci 1
Serial0/0:X25 I P7 clear confirmation(3) 8 lci 16
Thanx
Regards
Arun Sharma
""Arun"" wrote in message
[EMAIL PRO
(4):0XC000(unknown)
what does this mean i kow something is wrong but where ...pls tell
thanx
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6975&t=6975
--
FAQ, list archives, and subscription in
switch but if i do it on switch it doesn't
see the router ..please help .
where i am doing wrong ..Please help
Thanx in advance
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=68
hi
how ur testing the access ..i hope this is by pinging the address and as
far as i know u need to permit icmp any any for this ...
see if this is the case
Regards
Arun Sharma
""Keith Townsend"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
&g
hi
You can find these utilities from www.download.com look for network
monitoring in search block ..choose from them there are many .
Regards
Arun Sharma
""Todd Kari"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Would anybody please a
hi
You can try taking out the modules and putting them back i have seen that
this do the job most of the timedo this and see if it works ...
Regards
Arun Sharma
""Infotech"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear Group
>
> I
gonna work--so pls help
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6106&t=6106
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
.
Pls suggest something .
Regards
Arun Sharma
""Bishara, Anan"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> If u delete any subinterface u need to reboot the router to remove it. It
> will stay in that case until u reboot the
n X25
Serial2/0 is down, line protocol is down
Hardware is M4T
Description: BGW 1.1
MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation X25, loopback not set
X.25 DCE, address , state R/Inactive, modulo 8, timer 0
Regards
Arun S
i don't find these commands on the my router i am using ver 11.3
both are not here or may be i don't know how to run them
Arun Sharma
""Rahul Kachalia"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Well not sure about the st
Hi
i am getting this message when i run
show int command on 3600 series router with x25 on it
i tried configuring it but i removed whats wrong can u pls help
Regards
Arun Sharma
Serial1/3.1 is deleted, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec
me the configuration and also will this
work on ver 11.3
i tried it on ver11.3 but i think it doesn';t support it
Pls suggest something .
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60
just route the packets
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6055&t=6055
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosu
hi
i am preparing for ccna can u pls email me the stuff for that ...i know i
won't be able to do the exchange ..but that will be a help to me
thanks in advance
Regarsd
Arun Sharma
""killer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
&g
processor, Implementation 33, Revision 1.0
Bridging software.
Regards
Arun Sharma
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Beat the hell out of me.
>
> In the past I have posted about problems with earlier 12.x codes, w
hi
yes i tried reloading the router with the cables attached and it worked
..
thanks for the help but what could be the reason for that if i know it will
be a help .
Arun Sharma
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]..
router .
Any help will be appreciated
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6021&t=6021
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
egardless of which port you
use
> on the switch? What do the switch ports negotiate to when autonegotiation
is
> enabled on the pc?
>
> andras
>
>
> -Original Message-
> From: Arun [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 22, 2001 2:50 AM
> To: [EMAIL PRO
ave you tried any other network cables - sounds like a distance issue,
but
> could also easily be a bad cable.
>
> andras
>
> -Original Message-
> From: Arun [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 21, 2001 10:12 PM
> To: [EMAIL PROTECTED]
> Subject: Regar
Hi
one more thing what should be the release we should be using for using this
..
the current release we are using is .Rel.11.2(8)SA5
""Arun"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
> I am facing problem in setting the isl trunk b
Hi
Can we do the above thing by opening conduits from the ip's that the dial-up
users will be using for giving them the access.
just curious
Regards
Arun Sharma
""Darren Crawford"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
&
talk to it .no other mode is working
..both this settings are on the workstations side .
Can anyone explain what the problem is or what is wrong somewhere .
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53
Hi
How dowe check that ..and how is it set
Arun
""Vincent Chong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> First, trunk mode is desirable, non-neigotate, auto, none, something like
> that.
>
> Second, isl is an enca
?
>
> Check your trunking mode in the catalyst.
>
> HTH
> Vincent Chong
>
> ""Arun"" Hi
> > I am facing problem in setting the isl trunk between 29900xL series
switch
> > and 7100 series router .The configuration is like i am using fast
etherne
Yes i think u need to upgrade to 11.8
""Jeff"" wrote in message
9aricg$6i0$[EMAIL PROTECTED]">news:9aricg$6i0$[EMAIL PROTECTED]...
> I am using a 4500 with a Fast Ethernet interface and would like to be able
> to route between VLANs that are setup on my 2900. I don't have the option
to
> use enc
this if i do
show cdp neigh the router see the switch but if i do it on switch it doesn't
see the router ..please help .
where i am doing wrong ..Please help
Thanx in advance
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
Try this
On terminal Server 2511, do not use "no
exec" command.
It will fix this problem..
Arun
--- perryb wrote:
> Hello,
>
> I'm still having 2511 terminal server reverse telnet
> problems. This may be
> a little long, but I wan
Hi
it seems that there is some access right problem on the tftp server if ur
using the unix use chmod command to change its right to rwx and it should
workif ur in NT see the rights of the file
Hope it will work
Arun
""Justin Lofton"" <[EMAIL PROTECTED]&g
Hi
You can use the set span command to mirror the traffic of the desired ports
to a particular port
Arun
""The.rock"" <[EMAIL PROTECTED]> wrote in message
99c060$vl9$[EMAIL PROTECTED]">news:99c060$vl9$[EMAIL PROTECTED]...
> I believe that the 3500 Catalyst s
Hi
the characters echoed might be due to the debug tools ..if ur seeing it
running across ur screen again and agian then it has something to do with
small servers tcp or udp ..
i think this will solve ur problem...but i am not sure
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAI
I upgraded IOS to 12.0(7), to upgrade IOS, I took
out flash memory from 2510 and put this on my working
2501 router and I was able to upgrade and then I put
it back into 2510.
But still it's hangs when it checks token ring port.
I will send you output of sho ver.
Thanks.
line..i reverse telnetted the line and checked ..using the AT command it
shows no carrier...the telephone cable connected is double checked ..can u
tell me how can i verify it is the problem before contacting the cisco.Your
help will be highly appreciated
Regards
Arun Sharma
It has 8 MB flash and currently it's utilizing only
4MB.
--- Frank Mendoza <[EMAIL PROTECTED]> wrote:
>
> Arun,
>
> Check that the image's size you are trying to
> upgrade to will fit into bootflash:
>
> Frank.
> >Date: Tue, 20 Mar 2001 20:18:39
any help.
Arun
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
__
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_
FAQ, list archives, and subscription info: http
line..i reverse telnetted the line and checked ..using the AT command it
shows no carrier...the telephone cable connected is double checked ..can u
tell me how can i verify it is the problem before contacting the cisco.Your
help will be highly appreciated
Regards
Arun Sharma
Hi Friends
Can anyone suggest me good books for my CCIE
LAB on
1. Voice over IP and
2. Bidging and DLSw+
Thanks.
Arun Upadhyay
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
__
Do You Yahoo!?
Get email at your own domain with
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
e:
> Oops. I was multiplying 512 bits times 5000 bits per
> second. I guess I lost
> a digit. Sorry.
>
> Now it's a much more interesting problem!
>
> Priscilla
>
> At 06:22 PM 10/10/00, Brian wrote:
> >On Tue, 10 Oct 2000, Priscilla Oppenheimer wrote:
> >
, the
buffers are full and the router begins to discard.
Thanks.
Arun
=
Arun Upadhyay
SE Engineering
MCSE CCNA CNA
__
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
**NOTE: New CCNA/CCDA List
Hi
I know a guy who did his CCNA and then CCIE. He
also suggested me to go for CCIE and now I am
preparing for CCIE written .
Arun
--- "Akinmade, Adetola (KNMD)" <[EMAIL PROTECTED]>
wrote:
> It is all in the mind,
> I think it depends on the individual i.e do you
the
existing Frame relay connection at the HQ office.
Now my doubt is , do I need to call only phone company
for getting Frame relay line and DLCI no. or I have
to also involve ISP . Do I need valid IP from ISP or I
can use any private IP address.
Thanks in advance for any help.
Arun
73 matches
Mail list logo