ou what r u tryng to do?
>
>
> ""Cisco Breaker"" wrote in message
> news:[EMAIL PROTECTED]
> > Hi all,
> >
> > Anybody used Frame relay over IP without using MPLS or GRE Tunnel with
> Cisco
> > routers?
> >
> > We are
Hi all,
Anybody used Frame relay over IP without using MPLS or GRE Tunnel with Cisco
routers?
We are searching for a solution to deploy Frame relay over IP without using
MPLS or GRE tunnel.
Any help will be appreciated.
Best regards,
Cisco Breaker
Message Posted at:
http
a spectrum analyser to determine if there is a strong RF
> interference from somewhere close bythis is probably ur best bet.
>
> Tunde
>
>
> - Original Message -
> From: "Cisco Breaker"
> To:
> Sent: Thursday, November 21, 2002 9:04 AM
> Subject: Wir
Hi All,
We have installed Aironet 350 series bridges 2 months ago. They were working
fine until yesterday. Bridges are on the top of two buildings and they
were and are clearly seeing each other, freshnel zone okey. But yesterday
morning the network was gone. We have controlled the settings and
rovide one set of SPI's,
and therefore, the router/firewall can only build one tunnel, hence only one
line in your ACL.
With IKE, it dynamically creates unique SPI's per tunnel/ACL line, and
therefore you're not limited.
Best regards,
Cisco Breaker
""Brunner Joseph&q
he IPSec manual restriction of permit entries. I
want to know why is this restriction. Because of one SPI for one permit
entry?
Any help will be really appreciated.
Best regards,
Cisco Breaker
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
Anyone used Monitoring center? Is it smilar to CSPM?
Does it shows like top 10 ip address, top 10 visited sites and something
like these? (You can view these from CSPM )
Anyhelp will be appreciated.
Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56987&t=56987
-
Hi all,
Are there anybody working at an ISP and deployed Managed Security Services ?
Which product did you use, for IDS, Firewall and VPN?
As I saw only Cisco supports both of them. Any suggestions that might help
will be appreciated.
Best regards,
Message Posted at:
http://www.groupstudy.com
Thanks Steve.
Best regards,
Cisco Breaker
""Steven A. Ridder"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Oops, wrong link.
>
> pad
> pad
> pad
>
> http://www.cisco.com/networkers/nw02/presos.html
>
>
> --
> RFC
Did you disable spanning tree or used portfast on the ports which are
connected to clients. We have a customer that had the same issue and we
changed the client ports on the 6500's to portfast.
Here is the link.
http://www.cisco.com/warp/public/473/12.html
Best regards,
Cisco Br
ive 8 gig not 4 gig RX
for gig TX.
Best regards,
Cisco Breaker
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47562&t=47562
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
PIX doesnt support that, routers or sups supports.
Best regards,
""Anil Kumar"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> Does the PIX fw support secondary ip address option for the
> interface, as which is carried out on router ethernet
> interface?
>
>
> Th
Hi all,
My questions are regarding to CAR aka rate-limit. I have use rate-limit with
access-list but I never wonder how many policies can I create with
access-lists.
How many committed access rate policies with access-lists can be applied to
an interface?
Documentations says 100 policies (can b
> specify "balance leastconn" to balance based on connections.
>
> Sincerely,
> Patrick J Greene
>
>
>
>
> -Original Message-
> From: Cisco Breaker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 13, 2002 3:26 AM
> To: [EMAIL PROTECTED]
> Subject: T
Hi,
Latest update is at
http://www.cisco.com/kobayashi/sw-center/sw-ciscosecure.shtml
For the attacks you cant do anything other than blocking or reset. You can
change the severtiy level for e-mails.
Best regards,
""Johnson, Richard (NY Int)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
Yes, We are using CSS to load balance between five Microsoft Terminal
Servers.
Best regards,
""Michael Williams"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What are you using to do the load balancing? The Windows machines? Or
> something in the Cisco, like Server Load
Hi,
We have implemented load balancing between 5 microsoft terminal servers. The
problem is when I looked at the second server I see 5 people connected but
from the CSS view there is only 2 people connected. We tried this example
with clearing counters on CSS and restarting all terminal servers t
vlan Set VLAN when interface is in access mode
>
> As far as appletalk is concerned yes you need a appletalke capable
> router or bridge it.
>
> Dave
>
> As
>
> Cisco Breaker wrote:
> >
> > Hi All,
> >
> > Our customer wants to buy cat 400
t which is on the switch to 2 Vlans (multi Vlan) it will
be OK but is it possible?
Any help will be appreciated.
Best regards,
Cisco Breaker
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41571&t=41571
--
FAQ,
there any
resources that tells how to write a custom signature. We are using CSPM
2.3.3i.
Any help will be appreciated.
Best regards,
Cisco Breaker
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41565&t=41565
--
FAQ,
gt; http://sar.dynu.com
>
>
> ""Ladrach, Daniel E."" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Make sure you turned on CEF. Also, make sure your access-lists are
> correct.
> >
> > Daniel Ladrach
> > CCNA,
Nothing changes... the same statistics. I applied them as output for eth.
Best regards,
""Steven A. Ridder"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Try it on the ethernet interface
>
> --
>
> RFC 1149 Compliant.
> Get in my head:
> http://sar.dynu.com
Message Posted
many things so
I thought maybe someone can help.
Best regards,
Cisco Breaker,
CCNP,CCDP
Router#sh run
Building configuration...
Current configuration : 1959 bytes
!
interface Ethernet0
ip address 192.168.1.3 255.255.255.0
interface Serial0
ip address 192.168.2.2 255.255.255.252
rate-limit
t now if you can't understand or can't
solve it, somebody might have done it before and can enlighten you. This is
rellay grea.
Best regards,
Cisco Breaker
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Your
Hi all,
I have a question regarding priority groups. We have 2 firewalls. 10.1.1.2
and 10.1.1.3. I am using 10.1.1.2 . But even if I am using 10.1.1.2 the
connection is slow as before. What is wrong with my config? Any answer will
be highly appreciated.
Best regards,
Ciscobreaker,
CCNP,CCDP
R
]f you havent donloaded the catalyst CWI to the switch it doesnt work even
if you apply IP HTTP SERVER command. Not an answer to my question but
thanks.
""Georg Pauwen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I am not sure if it works through the Catalyst CWI, b
I know that you can create VLAN or enable a port from CWI software inside
the CAT4000. Is it possible to configure layer3 routing (if you have the
module SUP3) from the CWI of the CAT4000? Because my customer doesnt want to
buy CiscoWorks2000 for only one switch.
Best regards,
Message Posted
I want to assign IP addresses to my users based on their username and
password on the 2522 router. They are connecting through the async lines. So
far I was giving IP addresses from the ip pool but because of the rules on
the firewall I have to do something like this. Can it be done without an AAA
pportunity
> >
> >
> > On Sat, 12 Jan 2002, Bill Carter wrote:
> >
> > > If the static routes have the save metric, the router will load
balance
> > > traffic it sends out according to the routes. I don't like this
option
> > > because if one
Hi all,
My customer wants load balancing solution to a branch office. He heard that
it can be done with static routes, but as I know load balancing can't be
done by deploying static routes. Any help about this? Can it be done or how
effective will it be?
Best regards,
Message Posted at:
http
> used on multiple routers. Or so its stated in the ICRC book (page 373).
>
> So, I'm not really sure what benefit there is for this command,
> as it doesn't seem to simplify the config.
>
> But I'm sure I'm missing something... :-)
>
> Thanks for a
Your only choice is to use global username other router and password the
sama as your router they must be identical on both sides.
""bergenpeak"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> "sent-username" is not an option for me under ppp chap. My
> options at "ppp chap" a
for
this?
Best regards,
""Cisco Breaker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I solved the problem about ppp negotiation on the previous thread now a
> strange thing happened. The configs are below.
>
>
Hi all,
I solved the problem about ppp negotiation on the previous thread now a
strange thing happened. The configs are below.
host A--newyork-albany---host B
10.1.3.2 10.1.1.2
Everything works fine ppp authentication and connection from aux. But while
they
The problem is not that command the problem is related to layer 2 and is
solved in 2 ways.
1 decreasing the speed to 9600
2 or change the ios to 12.09
best regards,
""Paul Werner"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> As previously mentioned in another post, your sha
ng 12.0. Went back to 12.1 with the same
> configs I just had working at 38400 and with IOS 12.1 I have to drop
> the aux line speed to 9600 to get them to work! A buglet...possibly!
>
> So try downgrading the IOS and see if they start to work at 38400, again!
>
> Stefan
>
>
&
Then what is the passing score, 800?
Best regards,
""Lange, Eric"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> No. However, I took the test, and failed it with a 755, and they do ask
a
> lot of GUI questions. Specifically, to do this function do you click on
> this than
nal Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Cisco Breaker
> Sent: Thursday, January 03, 2002 12:34 PM
> To: [EMAIL PROTECTED]
> Subject: Re: PPP negotiaiton problem [7:30767]
>
>
> Excuse me everyone but passwords are the same. While I was
Excuse me everyone but passwords are the same. While I was pasting here I
just changed the passwords of the config but they were the same before as
cisco. And I am trying now, both passwords are the same but it isnt working.
Best regards,
""Cisco Breaker"" wrote in mess
Hi all,
I am configuring 2 router from their aux ports (but not back to back) with
usr modems. I have configured the aux ports like they will act as back up
ports. Everything is normal till it comes to ppp authentication session. I
am pasting the configs and also after I tried my configs but the
Thanks for your answers. Ill report these ideas to my customer and wait for
his response.
Best regards,
""Cisco Breaker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> I have a client that installed a Linux NIS server whi
Hi All,
I have a client that installed a Linux NIS server which is working with
broadcasts. That server is connected to cisco 4908. Server IP is
192.168.5.2. He is saying that when NIS server starts to work all clients
and NIS server is receiving a message at below,
" 192.168.5.2 sent an invalid
Very interesting. Thank you so much.
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> This is filler due to the GroupStudy bug that eliminates text with URLs at
> the beginning of messages. This is filler due to the GroupStudy bug that
> eliminates text w
Hi everyone,
I have a customer that uses 3600 with E1 leased line connections to their
branch offices and their consultant company. They want a full control on the
consultants so they want some config changes to manage them.
First there are two locations that connect to their network for consult
ual*
> then. Your slow link will get as much traffic as your fast one, which
could
> cause a bottleneck. See if there is some command to set a default cost on
> the link, then set them both the same.
>
> Hope this helps
>
> ""Cisco Breaker"" wrote in messag
I implemented OSPF load balancing but never done unequal load balancing. My
customer wants Unequal loadbalancing on Motorola routers. As I know Unequal
load balancing cant be implemented on Cisco without policy-map? Any
suggestions or any info?
Best regards,
Message Posted at:
http://www.grou
100 $ for one exam in USA
Best regards,
""]hsan Turkmen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi folks..!
> How much do you pay for a CCNP exam in other parts of the world?. It is
180
> USD + VAT here (Turkey). Your feedbacks are appreciated..
Message Posted at:
h
Design
Considerations. What is the percentage of these 3 chapters in the exam?
Any help will be appreciated?
Best regards,
Cisco Breaker
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26344&t=26344
--
FAQ, list archi
Hi all,
I have a customer that uses both Novell and NT. We upgraded their LAN with
6500 and 3500 switches. Now we will implement VLANs. I know how to configure
VLAN for IP but never done it with IPX. I red the docs on cisco but I have a
question on my mind. As I know the customer only give a netw
Hi all,
I am trying to use a windows CE platform to configure routers or modems but
I cant do it. I installed different kind of emulation programs and set the
baud rate to 9600 blah blah also used VT100 but nothing works. I checked the
cable and verified that it is working. Has anybody tried this
t sort of questions did you get? I've been thinking of taking
> the voice exam for sometime but haven't because I thought the exams are
only
> for Cisco partners and I'm working for a end user at the moment.
>
> Regards
>
> Patrick
>
> ""Cisco Break
Passed . Questions about ports on 36xx and 26xx series was hard.
best regards,
""Cisco Breaker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am taking CVOICE exam in a few hours. Any last minute advice would be
> appraciated.
>
> B
I am taking CVOICE exam in a few hours. Any last minute advice would be
appraciated.
Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=22000&t=22000
--
FAQ, list archives, and subscription info: http://www.groupstudy
x27;t work.
Best regards,
Cisco Breaker
""manhho nguyen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I want to configure asyn callback in router 2511.
> the configuration is below, but when receive callback number from client,
> th
I have made the config with num-exp command and it worked.
Thanks for the answers.
""Cisco Breaker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> We have a customer that wants a implementation of voice over ip. Their
dial
&g
Thanks for the answers .
Best regards,
""Cisco Breaker"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone?
>
> Does anybody know how to view the last time the config changed or how to
> view which commands added at what time to
Hi All,
We have a customer that wants a implementation of voice over ip. Their dial
plan will be like this.
A-clients --pbx--router--voip--router--pbx--Bclients
|
|
router
g system default start-stop group tacacs+
>
> AAA accounting will solve this problem. However, you will have t setup a
> TACACS server and an accounting file.
>
> >From: "Cisco Breaker" >Reply-To: "Cisco Breaker" >To:
> [EMAIL PROTECTED] >Subject: Ho
Hi everyone?
Does anybody know how to view the last time the config changed or how to
view which commands added at what time to a router? I tried show log I only
see updowns etc..
Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20968&t=20968
---
Hi All,
I am planning to take CVOICE exam so I have a few questions about the topics
regarding the exam.
Approximately how many questions will be about the commands, and are there
any questions about AVVID.
Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20562
clearly we will route them from eth to wan by frame relay
""Patrick Donlon"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In short yes, once you've packetised the voice you can just route it like
> any other ip packets
>
> cheers
Hi all,
I have a question regarding to Voice over IP. Is it possible to make voice
over IP connections on eth and distributing it by ip over frame relay by a
different vendors router?.
Let me explain this scenerio in detail. You have a wide area network
connected by a frame relay cloud with Mot
62 matches
Mail list logo
