supported under
CatOS; I coudn't tell you for sure one way or another without looking into
it further. I do know that in IOS, NetFlow requires that you have an IP+
feature-set.
Greg Reaume
sam sneed wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
So everyone seems to recommend Ne
://www.canet3.net/stats/map.html
And of course, although they have no relation to NetFlow, no disscussion of
network monitoring tools is complete without Tobi's Tools:
http://www.smokeping.org
http://www.mrtg.org
http://www.rrdtool.org
HTH,
Greg Reaume
Cliff Stewart wrote in message
[EMAIL
a link to below and it
includes a number of handy little tools. 'flow-filter' will allow you to
filter on any attribute in the flow record and output the info to stdio.
HTH,
Greg Reaume
Mark W. Odette II wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Is there something
Here's the 'man' page on flow-tools. It gives a good overview of NetFlow,
the different versions and their assoc export fields, and what 'goodies'
flow-tools includes.
http://www.splintered.net/sw/flow-tools/docs/flow-tools.html
Read this.
Greg Reaume
Greg Reaume wrote in message
[EMAIL
I sent this and then it showed up in my newsreader as removed from server.
? My apologies if I double post.
Greg
Greg Reaume wrote in message news:...
Here's the 'man' page on flow-tools. It gives a good overview of NetFlow,
the different versions and their assoc export fields, and what
when it comes to NAT, it
would be assumed that it will also run the firewall feature-set and be
secured appropriately. You would have to permit this particular traffic in
your external access-lists.
HTH
Greg Reaume
Harold Monroe wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
/products/hw/switches/ps211/index.html
HTH
Greg Reaume
JohnZ wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Well, when I wrote the orginal post I knew I will have these questions.
Basically the first layer of support or help desk if you will have more PCs
then t
that before and I'd feel more
comfortable taking some time to understand it. If the need is that urgent
that there is no time to spare, you should be able to call TAC under your
service contract, right? :)
Good luck.
Greg Reaume
YASSER ALY wrote in message
[EMAIL PROTECTED]">news:[EMAIL P
Great! Just what I needed. Thanks for the clarification.
Now that I think about it, the ability to set TCP/IP properties on the
'Network Bridge' item is a dead giveaway. :)
Greg Reaume
Erick B. wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Greg,
Windows
the postings, I know that I use Outlook Express through Outlook (news
button), and I do see the postings that I make in each thread. However, I
can only choose to either post to thread, or reply directly to sender. If I
want to do both I must manually add the destinations to the message.
Greg Reaume
Hi all,
I am currently a college student that will be receiving a diploma in
Telecommunications Technology (http://www.telecomtech.org) from Sheridan
College (http://www.sheridanc.on.ca) in Dec 2002. I have decided that I
wish to pursue a bachelors degree and possibly a masters thereafter,
Hi All,
I was wondering if it's possible to forward DHCP packets through a PIX-PIX
VPN tunnel? I have 1 DHCP server and would like to start using it for my
branch offices seeing as they have more problems with DHCP and no IT staff
to support it.
I haven't found any documentation on this. Has
Hi All,
I was wondering if it's possible to forward DHCP packets through a PIX-PIX
VPN tunnel? I have 1 DHCP server and would like to start using it for my
branch offices seeing as they have more problems with DHCP and no IT staff
to support it.
I haven't found any documentation on this. Has
Hi All,
I was wondering if it's possible to forward DHCP packets through a PIX-PIX
VPN tunnel? I have 1 DHCP server and would like to start using it for my
branch offices seeing as they have more problems with DHCP and no IT staff
to support it.
I haven't found any documentation on this. Has
Don't forget the 2650 series as well plus IOS.
""Groupstudy"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
The 2620 and 2621 have fast ethernet ports and support trunking with IP
Plus
IOS.
- Original Message -
From: Kevin Wigle [EMAIL
No offense intended, but whatever happened to good old fashioned RTFM. :)
When I had to implement a config such as you state, it took me approx. 5
minutes to find an information source on CCO and about 1 hour to get it
setup and to work out my mistakes.
I think that the lessons learned by
My understanding was the part number would be WIC-1FE since the 1700 series
runs fast ethernet interfaces. ISL can only be done with fast ethernet
interfaces but I haven't seen any documentation yet about wheather or not
the 1700 series supports ISL at all. Can anyone else clear this up?
Greg
...a router with VLAN support that is. Most hardware platforms will do as
long as they have fast ethernet port and plus image IOS.
Greg
"Jason Baker" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
you need a router to route between vlan's
Regards,
Jason Baker
ws up
in any of the catalogs - CCNA, CCDA, CCNP, et al. They're working on it I
guess.. but how's this any different or better than the previous site. I
fail to see any difference. :-)
Bharat Suneja
""Greg Reaume"" [EMAIL PROTECTED] wrote in message
90ba00$p6t$[EMAIL PROTECTED
I have looked into doing something similar in one of my branch offices. We
would be getting ADSL provided with an ADSL modem and dynamic IP. We are
getting a PIX-506 to provide firewalling for that office and VPN tunnel
services to our datacentre. The outside interface connected to the ADSL
Hi There,
I have a 1750 with a WIC-2A/S (2 Asynchronous/Synchronous Serial) and 2 USR
Courier V.Everything modems attached via 2 DB25-SmartSerial cables. The
courier modems have a synchronous mode I'd like to use and was wondering if
anyone here has tried this configuration before. I've tried
/1024494.pdf
TIA,
Greg
""Greg Reaume"" [EMAIL PROTECTED] wrote in message
90eh6d$j21$[EMAIL PROTECTED]">news:90eh6d$j21$[EMAIL PROTECTED]...
Hi There,
I have a 1750 with a WIC-2A/S (2 Asynchronous/Synchronous Serial) and 2 USR
Courier V.Everything modems attached v
Website is back up but I'm just getting Oracle ODBC driver errors on every
page. Can't see anything. I've already e-mailed [EMAIL PROTECTED]
because there is no [EMAIL PROTECTED] No response yet.
Is anyone else having the same problem?
_
FAQ, list archives,
dlg$[EMAIL PROTECTED]">news:8tt5l2$dlg$[EMAIL PROTECTED]...
one more reason to read my posts first - the link I sent is fine. can go in
as either guest or registered. info looks to be about the same. here it is
again.
http://www.cisco.com/tac/newsflash/vpn2.html
Chuck
"Greg Reaume&qu
I apologize if this gets posted twice. It hadn't shown up on my end for
over an hour.
Message:
What's the deal with this? Is it free for a CCO user? Do they record this
in any way or is it just practice? Can you only take the tests once?
Any response is appreciated.
Greg
I'm not sure about the all or nothing question as far as address translation
goes but I may have another suggestion you can look into.
At my company we have a PIX on the edge of our network with no DMZ, just
Inside Outside. We are statically NATing all of our servers which need to
be accesible
I work 28+ hours a week as the Senior Network Analyst for one of Canada's
largest insurance brokerages.
I go to college full time in a telecommunications program that was just
moved into a $38mil new building with Cisco RS up to the wazoo. I finished
last year, my first year, with a perfect 4.0
I would guess you would have to use some solution like the "Auto-Switch"
previously mentioned or any of the NICs with load balancing / fault
tolerance support. You would then most likely configure spanning-tree
redundancy between the two switches. That's a little messy though.
I like the RPS
I just installed a PIX-506 and 10 was the max. I believe, though am not
certain, this is the case accross all hardware platforms running 5.2
software.
HTH
Greg
"Jim Bond" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Thank you!
One more question: when I
Hi there,
Were you able to find a cable config for what you were looking for? Do you
understand the interface and req'd cables enough to provide me with a
back-to-back fr cloud sim config or a back-to-back-to-back fr switched
config?
The reason I ask is because I have 2/3 2621s with WIC-2A/S
to have 2 end points and 1 switch?
TIA
--
Greg Reaume
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure
to
implement it. It's still in proposal right now. I'm planning on putting a
PIX506 in the branch and moving the PIX520 we already have at our website
branch to the head office.
Hope this helps. Don't quote ME on the stats because I got them from a
rep.
--
Greg Reaume
32 matches
Mail list logo