RE: traffic analyzer [7:41267]

Patrick have you tried setting a data pattern?? That's what I did and it works a treat for only monitoring a given subnet. Sam. -Original Message- From: Patrick Ramsey [mailto:[EMAIL PROTECTED]] Sent: Friday, 12 April 2002 7:12 PM To: [EMAIL PROTECTED] Subject: Re: traffic analyzer

RE: CCIE Written Reading.. [7:41017]

Bridges, Routers, and Switches for CCIE's by Andrew Bruce Caslow. 0130903892 HTH, Sam. -Original Message- From: Kris Keen [mailto:[EMAIL PROTECTED]] Sent: Thursday, 11 April 2002 8:27 AM To: [EMAIL PROTECTED] Subject: RE: CCIE Written Reading.. [7:41017] Thankyou all! Anyone have

Cisco Audio Files [7:40911]

Hello all, Just wondering if anyone has (or knows where to get) Cisco audio files, such as from sessions at Networkers? I would like to be able to listen to them in the car Thanks for any help anyone is able to provide... Sam. Message Posted at:

RE: Cisco Audio Files [7:40911]

-Original Message- From: Sam Deckert [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 09, 2002 9:07 AM To: [EMAIL PROTECTED] Subject: Cisco Audio Files [7:40911] Hello all, Just wondering if anyone has (or knows where to get) Cisco audio files, such as from sessions at Networkers? I would

Traffic type monitoring [7:34382]

Hello everyone, Just wondering what you guys would use to monitor the traffic going over a single frame PVC? I was thinking of spanning the port on the switch, and using Sniffer with filters. Are there any better alternatives?? Thanks for any help! Sam. Message Posted at:

RE: Traffic type monitoring [7:34382]

by monitoring, i mean by protocol and possibly port..sorry, should have been more specific. Dont think MRTG will do this?? Thanks though! Sam. -Original Message- From: Jeroen Timmer [mailto:[EMAIL PROTECTED]] Sent: Tuesday, 5 February 2002 9:09 AM To: 'Sam Deckert' Subject

CCNP Voice Specialisation [7:34253]

Hello everyone, Just wondering if some of you could share some opinions on what study materials were useful in obtaining the CCNP Voice Specialisation?? I have completed my CCNP and am doing some basic voice implementations at work, so any recommendations on which exam to tackle first etc would

RE: ISDN DDR Question [7:28257]

/Support/PSP/psp_view.pl?p=Internetworking:PPPs =Implementation_and_Configuration Cheers Pat Sam Deckert wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... hey all, just wondering if anyone knows how to extend the amount of time it takes before the second channel comes do

ISDN DDR Question [7:28257]

hey all, just wondering if anyone knows how to extend the amount of time it takes before the second channel comes down after the traffic level drops below the load threshold, when using multilink isdn with 2 channels? Any help would be great!! Message Posted at:

Re: AARRGGHH!!! Flash on a 2500! [7:24564]

Hey Mike, From my limited experience, I usually go by the name of the image. an m means run from memory, and a z means the image is compressed. ie. c1700-bno3r2sy756i-mz.121-3.XT1.bin Hope that helps! Sam. - Original Message - From: Michael Williams To: Sent: Tuesday, October 30,

Re: DTE/DCE explanation please [7:24071]

. Hope that helps. Tim -Original Message- From: Sam Deckert [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, October 24, 2001 10:54 PM To: [EMAIL PROTECTED] Subject: DTE/DCE explanation please [7:24071] Hello, Could someone kindly explain the whole DTE / DCE thing in relation

Re: DTE/DCE explanation please [7:24071]

to getting to have a play (in a non-production environment!) without the threat of bringing anything important down. The routers I have worked with in my previous job pretty much involved telnet and that was it. Thanks heaps again! - Original Message - From: Drew - Home To: Sam Deckert Sent

Re: new laptop and no db9 [7:24186]

i used a usb to serial converter (not a cable - an actual little box) from belkin. It works great. Check it out @ www.belkin.com Sam. - Original Message - From: Rick To: Sent: Friday, October 26, 2001 11:07 AM Subject: new laptop and no db9 [7:24186] well I got a new laptop in at

DTE/DCE explanation please [7:24071]

Hello, Could someone kindly explain the whole DTE / DCE thing in relation to setting up a home lab and using routers back to back? I believe that DTE is male and DCE female, but what are the other differences? When connecting a router to a CSU/DSU, would you always order a DTE cable? Thanks

Re: Can I configure 2 leased line for single channel ? [7:21154]

Could he set the encapsulation of each serial int to be ppp, and use ppp multilink on them?? - Original Message - From: Stephen Skinner To: Sent: Thursday, September 27, 2001 12:28 AM Subject: Re: Can I configure 2 leased line for single channel ? [7:21147] not as far as i am

Re: Regarding 2509 telneting sessions... [7:20476]

Another solution you might consider is using some of SecureCRTs cool features Create a connection for each router you want to connect to through the 2509, and modify the login script for each connection (in the connection properties), having it first log you into the 2509 and then reverse

IPsec over GRE tunnel to *nix box [7:19554]

Hey everyone, First and foremost, I hope all people that have been affected by the tragedy are coping ok - we here in Oz are thinking and praying for you. Also, I was just wondering if anyone has ever been able to terminate a GRE tunnel from a Cisco router to a *nix box of some flavor? I have

Re: how to make a router firewall? [7:18268]

Thanks for that link Bill - it rocks! Sam. - Original Message - From: Bill Carter To: Sent: Tuesday, September 11, 2001 1:23 AM Subject: RE: how to make a router firewall? [7:18268] Rob Thomas has done some good work on this.

Re: IP in IP GRE tunneling [7:16833]

Would you be able to post a sample config of GRE IP/IP tunnelling over the Internet (with and without IPSec?)?? That would be great. Having a bit of trouble with it Thanks! Sam. - Original Message - From: Juliano Moises da Luz To: Sent: Thursday, August 23, 2001 3:05 AM

Cisco 761 Firewall [7:16629]

Hello Everyone Just wonder if anyone is aware of a way to restrict traffic entering a Cisco 761 router form the Internet to only ftp control and data traffic. From my searching, I have found that it will probably need to be done with the set ip filter command, however have not seen an

1751 IPSec Tunnel Query [7:16237]

Hey everyone, Just wondering if anyone knows approximately how many 56-bit IPSec encrypted tunnels a 1751 with a hardware encryption module would be able to support? The Internet connection over which the tunnels would be running would probably be about 2Mb. Thanks for any help anyone is able

Re: Recognize this?? [7:14077]

try putting: no service config into your config. It appears to be looking for a config from a tftp server... No, I dont think this would be responsible for your link being down Sam. - Original Message - From: Stephen Flint To: Sent: Sunday, July 29, 2001 8:06 PM Subject:

Re: CCO questions [7:11275]

Hey all Does anyone know what is involved for a Cisco Authorised Reseller to obtain access to download router images etc from CCO? What level of access or partner status is required to be able to download the software? Thanks! Sam. - Original Message - From: Rik Guyler To:

Re: ISDN B Channel Disconnecting Cont... [7:10596]

:245705605152: BR0/1:2 LCP: State is Closed 06:28:246973732444: BR0/1:2 PPP: Phase is DOWN - Original Message - From: Tony Medeiros To: Sam Deckert ; Sent: Monday, July 02, 2001 4:19 PM Subject: Re: ISDN B Channel Disconnecting Cont... [7:10596] Do a debug PPP authen and a debug PPP

Re: ISDN B Channel Disconnecting Cont... [7:10596]

disconnected from unknown , call lasted 20 seconds 06:48:135302086656: %LINK-3-UPDOWN: Interface BRI0/1:2, changed state to down - Original Message - From: Sam Deckert To: Tony Medeiros ; Sent: Monday, July 02, 2001 4:54 PM Subject: Re: ISDN B Channel Disconnecting Cont... [7:10596] Thanks

Re: ISDN B Channel Disconnecting Cont... [7:10596]

and the dialer load-threshold 2 command no longer keeps a multilink bundle of two links connected indefinitely.) Unquote http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/d ial_c/dcprt2/dcppp.htm Sam Deckert wrote in message ... Here is the debug isdn events output

Re: ISDN B Channel Disconnecting Cont... [7:10596]

. The US seems to have more of a problem with needing to set the speed to 56 than anywhere else. Jim Sam Deckert wrote: Here is the debug isdn events output from when the 1700 disconnects: clarendon2-gw# 04:14:10: ISDN BR0: Event: Hangup call to call id 0x801E 04:14:10: ISDN BR0

ISDN B Channel Disconnecting [7:10593]

Hello everyone, I am having a bit of an ISDN related problem at the moment and was wondering if anyone is able to help. I am connecting two sites together via 128k isdn, with one site having a 2611 and the other a 1700. I have the two sites permanently connected fine with the first B channel,

ISDN B Channel Disconnecting Cont... [7:10596]

help! Sam. - Original Message - From: Sam Deckert To: [EMAIL PROTECTED] Sent: Monday, July 02, 2001 3:09 PM Subject: ISDN B Channel Disconnecting Hello everyone, I am having a bit of an ISDN related problem at the moment and was wondering if anyone is able to help. I am connecting two

SSH over Internet - secure? [7:10251]

Gday everyone, Generally, do you feel that using SSH to administer a router over the Internet is secure, assuming all other aspects of the router config are secured? Thanks for your input Sam. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10251t=10251

Book Recommendations [7:10201]

Hey everyone, I am currently studying for my CCNP, and should have it knocked off in a couple of months. For study material so far, I have pretty much just been using the Cisco Press study guides and CCO. I am just wondering if anyone has any recommendations for good books, especially

Re: How to tell the difference beteween a 1600 and a 1600R [7:9943]

Check the image name from the sh ver - if it contains an 'm' it means run from memory I think. Here are the examples someone else used - you can see it from these: IOS for 1600: c1600-y-l.113-11b.bin IOS for 1600R: c1600-y-mz.120-9.bin HTH, Sam. - Original Message - From: Raul

Possible to span trunking port? [7:9506]

Hey all Just wondering if anyone knows if it is possible to span a trunking port on a 2924XL switch?? Thanks! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=9506t=9506 -- FAQ, list archives, and subscription info:

Re: Possible to span trunking port? [7:9506]

think? Thanks for your help!! Sam. - Original Message - From: Michael L. Williams To: Sam Deckert Sent: Saturday, June 23, 2001 8:13 AM Subject: Re: Possible to span trunking port? [7:9506] I don't see why that would be a problem except if your protocol analyzer doesn't

Span uplink port? [7:9280]

Hey everyone Just wondering if it is possible to span a trunking uplink port on a 2924XL switch? We need to analyse the traffic going from the switch to the router (we will be routing between VLANs). Actually, what we are going to try and do is capture traffic coming from the Internet -

Re: 801 ERROR urgent [7:8826]

try the following: conf t no service config hth! Sam. - Original Message - From: Manoj Sekhar To: Sent: Saturday, June 16, 2001 10:35 PM Subject: 801 ERROR urgent [7:8826] Hi all, I am getting the following error when I boot up the 801 router. %Error opening

Re: True Throughput on ISDN and Frame Relay [7:8445]

Would frame-relay also be full-duplex then?? Thanks.. Sam. - Original Message - From: Brian To: Sent: Thursday, June 14, 2001 12:48 PM Subject: Re: True Throughput on ISDN and Frame Relay [7:8445] Ok, heres a url showing it to be full duplex, it took awhile to find.

Weird DHCP/VLAN solution suggestions wanted!! [7:6579]

Hello everyone, Just wondering if anyone out there has come across this same issue: I am currently working on a site where each office in the building (29 offices) will be connected to a pair of 2924XL switches, and each office will also be in its own vlan (and therefore have its own network,

Re: Weird DHCP/VLAN solution suggestions wanted!! [7:6579]

] Subject: Re: Weird DHCP/VLAN solution suggestions wanted!! [7:6579] - Original Message - From: Sam Deckert The problem is the client wants to use DHCP, so that people in the offices can simply plug in and away they go. But how would you go about implementing a DHCP server

1601/1720 Serial Interface Question [7:4257]

Hello Everyone... Just wondering if anyone can confirm whether the serial interface on a 1601 has the same physical plug as a WIC-1T serial module for a 1720 Are they both DB-60?? Thanks!! Sam. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=4257t=4257

Internet Tunneling [7:2544]

Hello everyone Could someone please explain how I would go about connecting two private networks (behind two routers, each connected to the internet) over the Internet using some form of Tunnelling? Is there any special IOS release I need? Any special hardware? Security is not a great

Cisco IOS Question [7:2545]

Hello everyone! Just wondering if someone could explain the difference between the different IOS Feature Packs. Ie. What is the difference between IP Only, IP Plus, IP/Firewall etc etc. Do you know of a site that compares the capabilities of each? I have been looking on the Cisco website

Re: Cisco IOS Question [7:2545]

IOS has different feautre. You need to order IP/IPX feature set for cisco 2650 series at least, IOS is more expensive than the router if you order from cisco partner. hope this help Vincent Sam Deckert Hello everyone! Just wondering if someone could explain the difference between

Re: Cisco IOS Question [7:2545]

, CCNP+Security/CCDP, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Sam Deckert wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Thanks Vincent... Yeah, that was one of the reasons I was asking the question - I was

Re: Cisco IOS Question [7:2545]

ROTECTED]... Generally, IP is come with Router free. Generally speaking, different IOS has different feautre. You need to order IP/IPX feature set for cisco 2650 series at least, IOS is more expensive than the router if you order from cisco partner. hope this help Vincent Sam

Frame-relay traffic shaping with custom queuing

Hello everyone, It has been good listening to all of you, I have learnt a lot! Just wondered if anyone has any thoughts on a problem I am working on at the moment. It involves a frame-relay network here in Australia. It consists of a hub-and-spoke topology - one central site connected to all