Well
to enable the x25 on your router, you need
int s 0
encap x25
if the stock exchange provide ip address, then
int s 0
encap x25
ip address A.B.C.E 255.
and forward it to ethernet interface
int e 0
ip address X.Y.Z.Z
then you can enable any routing protocol that you want
like
Yes, this is true,
you can check the isdn session in the CIT manual
Sam
- Original Message -
From: "Hans Stout" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, January 03, 2001 7:51 PM
Subject: ISDN switch type
Hello colleagues,
I have heard that after changing the ISDN
Folks
I agree that no one is willing want to put ccie 102400 on their name card.
Let me tell you how do the management level look at ccie, at the very
begining when
cisco launch ccie, every one is very very crazy about ccie, engineers and
vendor,
as far as engineer concern, they can ask more, for
we need the output of
"show int tok 0"
and
check the "Keepalive" too
Sam Li
- Original Message -
From: Andrew Larkins [EMAIL PROTECTED]
To: Cisco Mail List [EMAIL PROTECTED]
Sent: Wednesday, November 01, 2000 4:18 PM
Subject: EIGRP Neighbour - keeps flapping
yes
inter s 0
ppp multilink
Sam Li
- Original Message -
From:
net974 at Yahoo
To: [EMAIL PROTECTED]
Sent: Wednesday, November 01, 2000
11:37 PM
Subject: PPP Multilink.
IS PPP Multilink is possible with serial wan
link using statis routes?
if yes
Questions:
Are they full mesh?
if yes, it is possible
or
they are partial mesh, you need
ip ospf priority command
ip ospf network broadcast
Sam Li
- Original Message -
From:
Mike
Canfield
To: [EMAIL PROTECTED]
Sent: Wednesday, November 01, 2000
11:08 AM
Subject
remember the file name and it variable
Sam Li
- Original Message -
From: Ngo Van Dzung [EMAIL PROTECTED]
To: CISCO Group Study [EMAIL PROTECTED]
Sent: Tuesday, October 31, 2000 5:08 PM
Subject: TELNET question?
Hi All,
I have server with SUN Solaris 7, from a Workstation (Windows 98), I
as far as i know, NO
even you have a MAU , it will take few seconds for your token interface to
join the token ring
Sam Li
CCSI 96009
- Original Message -
From: Hubert Pun [EMAIL PROTECTED]
To: Cisco Study Group [EMAIL PROTECTED]
Sent: Sunday, October 29, 2000 4:49 AM
Subject: Very
Have you try
router ospf 1
redistribute eigrp 100
default-metric 10
instead of using
router ospf 1
redistribute eigrp 100 metric 10
Sam Li
- Original Message -
From: Raymond Adi Irawan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 30, 2000 8:27 PM
Subject
device receive this packet, it will swap their "form port
#" to "destination port #" and vica versa
so the example 1 and example 2 are exactly the same. As far as your example
concern, your access list
is for incoming traffic.
Sam Li
=
GNOME [EMAIL PROTECTED] wrote in
Well
it is hard
loopback0 -3600 - 2900/1900 3600(ethernet) loopback0
since your 3600 don;t have the serial port, we can use your 2500 router
also the isdn, if you know someone using isdn somewhere, you can ask he/she
to set up
something like ddr for you
Sam Li
- Original Message -
From
ask for 10.4.0.1, it doesn;t match the
anyrule inside network 10.0.0.0
and DO NOT DROP the packet but seek the best alternative out, in this case
is Serial 0
Sam Li
- Original Message -
From: Cisco Kid [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Sunday
Louie
what is missing, your configuration
Sam Li
- Original Message -
From: Louie Belt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, October 25, 2000 1:03 PM
Subject: OSPF Demand Circuit...
While configuring and OSPF demand circuit over ISDN, I noticed that the
ISDN
link
try to use policy routing
int eth 0
ip addres x.x.x.x
ip policy route go-to-serial
route map go-to-serial 10 permit
match "what ever you want"
set interface s0
Sam LI
- Original Message -
From:
net974 at Yahoo
To: [EMAIL PROTECTED]
Sent: Tuesday,
why on-line, get the real one, you have to do a lot of lab
Sam Li
- Original Message -
From: Ya Wen [EMAIL PROTECTED]
To: Cisco Group Study [EMAIL PROTECTED]
Sent: Wednesday, October 25, 2000 6:40 AM
Subject: Online training
Hi, all:
My company agrees to pay me for an online CCIE
are you sure that 2 routers is enough for this,
It is my experience that i need 4 routers at least
Sam Li
- Original Message -
From: Charles Ryan [EMAIL PROTECTED]
To: Fanglo P.M. MA [EMAIL PROTECTED]
Cc: Cisco List [EMAIL PROTECTED]
Sent: Wednesday, October 25, 2000 5:01 AM
Subject: Re
for the ccnp, you can study the book of the ccnp series. However, the ccie
is talking about
you skill to configure the routers/switches/atm, if you want to get this
kind of skill,
work in the field
Sam Li
- Original Message -
From: Brian [EMAIL PROTECTED]
To: Jennifer Mellone [EMAIL
try "ip un-number command " may help
Sam Li
- Original Message -
From: FRS [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 10:25 PM
Subject: Dial Backup
Hi all,
I need your input here.
I have 4 remote sites that are
*)
router bgp 1
network 1.0.0.0 (* check the sytnax *)
network 2.0.0.0 (* check the synax *)
neigh 192.168.1.1 remote-as AS#
Sam Li
Fanglo P.M. MA [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know how to setup BGP home lab? Does there
try partition 1 8 8
it will fool the router that they have 2 flash both have 8M
Sam LI
- Original Message -
From: Tom Pruneau [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, January 15, 1980 9:07 AM
Subject: 2511 Flash Memory Question
Greetings All
I have a 2511 with 4 MB
well, read that chapter carefully, I have difficult on understanding when I
first read it
Sam Li
- Original Message -
From: Ed Moss [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 10:34 PM
Subject: Frame Relay Map Help
I am working
to access AS5800 by Microsoft Windows Client. So I will
configure MS Callback in 5800. Where will I find it? or Sample?
--
Rocky Joe
AISI-North
AsiaInfo Technologies (China),Inc.
Tel: (8610)62501658 Ext 5317
Email:[EMAIL PROTECTED]
"Sam LI" [EMAIL PROTECTED] wrote in message
00
Well, it seems that you boot the system from the
Rom,
and once you have boot the system from the rom, the
system will not run any routhing.
try this on you router
show flash
and see wether you have the flash or not, if not
download an ios to your router
Sam LI
Wafer Systems
try
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/53swcf2
/5300bas2.htm
or try to search the topic "ppp callback"
- Original Message -
From: cisco [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Monday, October 23, 2000 12:15 PM
Subject:
if you are talking about ccda 1.0, yes remember all the stuff from the book
however, the 2.0, NO
Sam Li
- Original Message -
From: RANMA [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Monday, October 23, 2000 5:35 PM
Subject: Any comment to my preparation
volume one is an excellent book, i guess everyone should have one,
well, I am still wiating for the Volume two.
Sam Li
- Original Message -
From: Bradley J. Wilson [EMAIL PROTECTED]
To: cisco [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 1:07 AM
Subject: Re: Doyle's book - ROuting
y, well you
can talk to the router
but you can't use it to send "control key" to recover password
Sam LI
- Original Message -
From: hifi hifi [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 1:02 AM
Subject: USB -- Console connector
Dear all,
My laptop c
well, you can consider the GNS filter too,
the input sap and outsap filter will help sometime but no always
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, October 23, 2000 9:50 PM
Subject: Fwd: Re: IPX
If you simply wish to
try the loop back test first
Is there any strong magnetic field aroud you, check the CSU/DSU too
Sam LI
- Original Message -
From: McCallum, Robert [EMAIL PROTECTED]
To: 'Ramesh c' [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Monday, October 23, 2000 9:02 PM
Subject: RE: CRC error
phone
yup, check the console line
line con 0
exec-timeout 0 0
Sam LI
- Original Message -
From: Pete [EMAIL PROTECTED]
To: 'cslx' [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 8:09 AM
Subject: RE: why?
Have your checked your timeouts? Email me if you need help
minicom is almost same as "telix" program in dos/win
Sam Li
- Original Message -
From: Paul Borghese [EMAIL PROTECTED]
To: Chuck Church [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 9:19 AM
Subject: Re: Linux, terminal emulation for console port
Try mi
no,
only if you are config the E1, E1 will use the R2 signalling
also the cas-group is the 12.0 version and the new one is the ds0-group
these cas-group and ds0-group is for the IDAM line(24 incoming line or 24
outgoing only), I
or IDAP(23 lines, can configure in or out on each individual
check the ppp authenication.
- Original Message -
From: Hans Schimek [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, October 20, 2000 4:14 AM
Subject: ISDN calls gets connected but disconnects immediately
hi!
i am simulating an isdn call on an isdn switch with 2 S0 interfaces.
i
ciscopro can run up to ver11.1
any higher ver on the ciscopro will reset the 2500 router
Sam Li
- Original Message -
From: Brian [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, October 20, 2000 8:03 PM
Subject: Cisco vs. CiscoPro
Can anyone summarize the differences between
Is there any one who have experience on configurating Voip in the AS5300
using the IDAM line
IDAM line is some sort of old version of T1.
thanks
Sam Li
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
perhaps try show version will able to help,
if you are not sure, get the enterprise version + appn will do
Sam LI
- Original Message -
From: FAISAL ATHAR [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, October 20, 2000 5:04 PM
Subject: Re: [IOS Version]
From Cisco Site, you can
36 matches
Mail list logo