checked the pin configuration by
surfing on Cisco cable specification doc of X21 DTE
cable(DB15 connector) and found that the cable is not
getting CTS from MUX, so am i rite in guessing that
this might be the main cause of DCD not coming up??
can anyone plz help ?? i will highly appreciate it
Sh
r
> DCD being low. It is more likely that there is a
> problem with the MUX config
> or the link which is causing both to be low.
>
> Regrds,
>
> Gareth
>
> ""Shoaib Waqar"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
I am getting trouble in ISDN bri link. I have a
Central site Router 3640 with 12.1.8 IP/IPX plus IOS.
the route has 4 port BRI module. The remote site is
having 2503, all u know that it has 1 port BRI. remote
site is running 11.2.1 version of IOS. The call is
placed using simple DDR commands as:
Dialer interface ?
>
> Dave
>
>
>
>
>
>
> "Shoaib
>
>
>
example, Eigrp will trigger your ISDN
> always up due to protocol
> characteristic. It will constant exchanger
>hello packet,. It is not recommended.
>
> HTH
> Vincent Chong
>
>
> ""Shoaib Waqar"" wrote in message
> [EMAIL PROTECTED]&q
> Wouldn't you need a dialer map command for
> interfaces, rather than specify
> dialer string?
>
> Albert
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Shoaib Waqar
> > Sent: Tuesday, 1 M
Dear Singh, it is already there.
Shoaib
--- Vivek Singh wrote:
> Shoaib, y don't u add static routes...?
>
> -Original Message-
> From: Shoaib Waqar [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 01, 2001 5:25 PM
> To: [EMAIL PROTECTED]
> Subject: Re: ISDN B
ler doesn't come up, then
> it could be a dialer
> problem. If it does come up, and dialing fails, then
> it could be an isdn
> problem.
>
> Albert
>
> > -Original Message-
> > From: Shoaib Waqar [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, 1 May 20
> the packet takes.
>
>
> Albert
>
> > -Original Message-
> > From: Shoaib Waqar [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, 1 May 2001 10:15
> > To: Albert lu
> > Cc: [EMAIL PROTECTED]
> > Subject: RE: ISDN BRI up but does not ping
> the packet takes.
>
>
> Albert
>
> > -Original Message-
> > From: Shoaib Waqar [mailto:[EMAIL PROTECTED]]
> > Sent: Tuesday, 1 May 2001 10:15
> > To: Albert lu
> > Cc: [EMAIL PROTECTED]
> > Subject: RE: ISDN BRI up but does not ping
and advertise to your network with a
> hevier weight than the IGP
> route
>
> if you want to test connectivity make the static
> more preferable make
> sure you have
> a interesting traffic access list or it will not
> dial.
>
>
>
>
>
> Shoaib Waqar
One of my friends adviced me regarding my issue of X21
DTE cable connectivity with MUX, to short pins 3 and
5, and pins 10 and 12 in order to force the CTS up, it
worked and serial controller is up on both sides, but
the issue is that line protocol is not coming up. The
configuration at each route
I think the best source of information regarding
CiscoWorks 2000 is Cisco documentation, it gave me a
lot of knowledge when i was nill in it. I think u
should try finding it on Cisco site. I just have
forgotten the link, sorry!!
Shoaib
CCNP,MCSE
--- Tim McCabe wrote:
> Can anybody recommend a
I just got my router down, it was 3640, which had been
working properly for last 3 months. It gave the
following error message and then hung up:
%ORINT: OIR Event has occured oir_ctrl 5000 oir_stat
8F8A
I know that OIR is Online Insertion and Removal but
the strange thing is that nobody inserted
I just got my router down, it was 3640, which had been
working properly for last 3 months. It gave the
following error message and then hung up:
%ORINT: OIR Event has occured oir_ctrl 5000 oir_stat
8F8A
I know that OIR is Online Insertion and Removal but
the strange thing is that nobody in
Can anyone plz tell me how many books we need for
fulfilling the course of Cisco Security Specialist,
which contain four exams. There is no book of PIX
Firewall available. I m waiting for your suggestions.
Shoaib
CCNP,MCSE
__
Do You Yahoo!?
Yahoo!
Did u try dialer dtr???
Waqar
--- NRF wrote:
> Consider this. I have 2 2610's, each with a
> WIC-1DSU T-1 card in them. I
> have these T-1's connected back to back. I have
> tried putting IP addreses,
> using encap ppp, and everything works cool, exactly
> the way I would expect
> it to work
r PBX??
any help will be certainly appreciated, i am waiting.
Shoaib Waqar
__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
Hi, as far as i remember, once i had the same problem,
VIP was not recognised, and the problem was solved by
upgrading the bootstrap software.
hope it will solve the problem
Shoaib
--- "Donohue, Steve" wrote:
> Hey Gang,
>
> I am wondering if anyone out there has had any
> problem with the VI
I have a problem scenario as:
I am having a Cisco 3662 router, having 2 port E&M
VIC. I have configured the E&M port with the required
parameters from PBX, like type 5, signal immediate and
operation 2 wire. I also have created a pots dial peer
for this E&M port which is connected to the PBX. The
as no text book at all?.
Any comments will be appreciated on this.
Thanks
Shoaib Waqar
Network Engineer
B.E.Computer Systems, MCP+I,MCSE,CCNA
Karachi, Pakistan
Get free email and a permanent address at http://www.netaddress.com
Dear All,
Can anyone tell me that when the testing of Routing 2.0 regarding CCNP track
4.0 will be started? is it 30th June 2000?
Shoaib
Thanks and regards,
Shoaib Waqar
Network Engineer
Bachelors of Engineering in Computer Systems(B.E.CS),
MCP+I,MCSE,CCNA
Sysnet Pakistan Pvt. Ltd
Dear All,
Can anyone tell me the detailed outline course of the CCNP 2.0 forth coming
track regarding routing 2.0? Also when the new track is going to be tested at
Sylvan Prometric centers? is it 30th June, 2000?
I am waiting for the reply
Regards,
Shoaib Waqar
Thanks and regards,
Shoaib Waqar
tell
me about it, is it really what i am understanding???
Regards,
Shoaib Waqar
Get free email and a permanent address at http://www.netaddress.com/?N=1
___
UPDATED Posting Guidelines: http
Hi guys,
Can anybody tell me the URL of Cisco Online Testing
which cisco offers at their website? I had this one
but i missed it unfortunately.
Thanks
Shoaib
__
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.c
Hi Guys,
I am planning to give my MCNS exam, I have got the
Cisco Press MCNS book from Michael Wenstrom. Does
anybody know some more material which will be helpful
in clearing this exam? Any sort of help will be highly
appreciated.
Thanks
Shoaib
__
In my opinion, these are the default commands entered.
While configuring CET, same sort of issue is there and
i concluded that these are the default commands. If
anyone has got any idea about that?
Shoaib
--- jc theard wrote:
> Hi all,
>
> I'm configuring a Cisco 2621 for VPN connection. Im
>
Hi Fellas,
Can anybody provide me some good links, study material
besides Cisco press book for MCNS preparation? I have
finished the book, now just preparing to go to Testing
center.
Plus if anyone has got Boson old version 4.23??
Any sort of help will be highly appreciated.
Thanks and regard
Hi Guys
I am gonna purchase boson tests for MCNS exam, so can
anybody tell me out of 3 boson tests, which one is the
best?
Shoaib
__
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
Message Posted a
Can anybody tell me which boson exam is the best out
of 3 test exams available regarding MCNS??? I am gonna
purchase any one of the 3 and i m confused, can
anybody help?
Shoaib
__
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http
s the
> test.
>
> Oh yeah, get a PIX and configure it! Oh about a VPN
> concentrator 3060?
> Radius and TACACS+ interest you?
>
> Oh I'm having a bad day today B. :-(
>
> Sad Theo
>
>
>
>
>
>
> "Shoaib Waqar"
Hi guys,
Can anybody tell me that which version of Cisco Secure
VPN client (version 1.0/1.1 OR 3.0/3.51) comes in MCNS
exam. I have read the MCNS Cisco press book but i
could not find enough material. Later, I was just
seeing the Course Outline and found the objectives:
Confguring the Cisco secu
Hi guys,
I just passed MCNS today with 906 marks. Thanks for
everybody who helped or tried to help me.
chao
Shoaib
__
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
Message Posted at:
http://www.gr
Hi guys
Can anybody tell me that which book to use to prepare
for CSPFA exam of CSS?? I have done with MCNS and for
CSPFA, i saw this book in cisco press storeL
Cisco Secure PIX Firewalls
by David Chapman / Cisco Press /
So kindly advice me whether its the right book to go
for CSPFA?
Any sort
thing you used to study?
> Thank you.
>
> Brian
>
> -Original Message-----
> From: Shoaib Waqar
> [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, June 06, 2002 8:19 PM
> To: [EMAIL PROTECTED]
> Subject: Passed MCNS today [7:45970]
>
> Hi guys,
> I j
Dear All, can anybody tell me the recommended books
for the preparation of CCIE written exam. Any idea and
thoughts will be appreciated.
Shoaib
__
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger
http://im.
36 matches
Mail list logo