Interesting! I didnt know you can do vlan routing on just ethernet
interfaces. I thought you would need a fast-ethernet interface for
that. But oh well, it's about time for Cisco to act smart. I know
Foundry iron family products support vlan routing even at 10mbps ethernet.
-Frank
O
Yes, I'm a happy camper when they came out with this
new feature. I don't have to spend like a gazillion
dollar just trying to buy a router with fast-ethernet
port that can do both vlan routing and multi layer
switching.
Regards,
Ofus
--- Frank Kim wrote:
> Interesting! I d
getting them from me. Please email me
offline because I have abused enough bandwidth by
sending this email already. Thanks.
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1249382658
-Frank
__
Do You Yahoo!?
Get personalized email addre
if i want to use cisco works to monitor a 6509 with super engine 2 ,do i
have to choose CWLMS-2.0 not CWLMS-1.0 ?
Thanks,
frank
"David C Prall" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> - Original Message -
> From: "frank"
> &
I didn't see any Appletalk or Netbios, but plenty of BGP, OSPF, and
Bridging.
Frank
""Ken Browne"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Do you see much appletalk or NetBios content on the CCIE written?
Message Posted at:
http://
i know CWLMS-2.0 is a bundle of unix and nt ver,but is
there any others?
Thank,
frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9135&t=9135
--
FAQ, list archives, and subscription info: http://www.groupstudy.
The Token Ring white paper from CCPrep.com would be a good addition to your
studies. Be aware of time management. Time flies when you're having fun.
Frank
""Ken Browne"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello. I'm gett
compared with 350-001,easier or much the same?
Thanks,
frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9027&t=9027
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
putting the router in 0x41 mode will also allow you to have r/w to flash.
eric, how did the test go? congrats?
-Frank
On Fri, 15 Jun 2001, EA Louie wrote:
> The only reason (that I can think of) that you'd need to do that is to
write
> a new image onto flash. And when you do a
Juan,
12.1(2)T ios and higher will supports dhcp client.
-Frank
On Tue, 12 Jun 2001, Juan Blanco wrote:
> Team,
> I have a cable modem connection, I want to be able to use my Cisco 1600
> router, does any ones know I could find some information of how doing this,
> the prob
t to spend the
least amount of money.
-Frank
On Sat, 9 Jun 2001, Marc Russell wrote:
> The Olicom 8600 is the same switch.
>
>
> Neil Schneider wrote:
>
> > The cisco CCIE lab includes the 3900 series token ring switch. What
other
> > switches use the same OS? Hopi
24XL, Four GBICs, two 10 ft fiber cable
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7563&t=7563
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
I'm currently using ip cef on my 4000m with two T1s attached. And I'm
getting true 50/50 outbound load balancing. My router is ip cef enabled
with ip load-sharing per packet. And of course 'ip route-cache' is
disabled on the interfaces as well.
-Frank
On Wed, 6 Jun
'minicom' is good
On Mon, 4 Jun 2001, nethacker711 wrote:
> I was searching the archives and could not find this one. Does anyone know
> of or can recommend a good HyperTerminal like program that will let me
> console into Cisco routers and other devices on Linux (RedHat)?
Message Posted at:
here that newer ios has
such feature for supporting isl/802.1q in 10mbps ethernet interface. Can
anyone verify this? Thanks for helping.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6867&t=6867
--
FAQ, list arc
the 7000 w/ RSP
cisco RSP7000 (R4700) processor with 131072K/2072K bytes of memory.
R4700 processor, Implementation 33, Revision 1.0
The only main difference is the 7000 w/ RSP has higher capacity for memory
storage.
I know this isn't a big deal. But it seems interesting to me.
-
or computer name, or unable to find computer address
4500M#sque?
% Unrecognized command
My question is, how do i gain my space back without reloading? Thanks for
any advice.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6729&t=6729
--
from 'sh proc mem' is relevant to
what? And how does such number exist? Thanks for any help.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6710&t=6710
--
FAQ, list archives, and subscription
dram, (no octal
cable)
2621,comes with two fast-ethernet ports, 8meg flash, 32meg
dram
Two Catalyst 3524XL
Four
GBICs
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6488&t=6488
--
FAQ, list archives, and subscript
Folks,
Nevermind the below message. I found out how to enable ipsec behind nat
on CCO. Problem fixed. Thanks.
-Frank
-- Forwarded message --
Date: Wed, 30 May 2001 07:46:59 -0400
From: Frank Kim
To: [EMAIL PROTECTED]
Subject: VPN to Cisco3030 concentrator behind nat [7:6405
What am
I missing? Thanks for any advice.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6405&t=6405
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
is only used to
> route traffic from one VLAN to other VLAN(s). It generally takes place at
> wire speeds inside a Cat switch with a L3 switch option, but is often see
> with routers that do not work at wire speeds.
>
> So the bottom line... think of a L3 switch as a device, and Inter-V
Thanks,
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6080&t=6080
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
Any difference?
"frank" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thanks,
>
>
> Frank
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PR
PayPal.com.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6043&t=6043
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
know where I'm getting at.
-Frank
On Thu, 24 May 2001, Erick B. wrote:
> Your telnet session is terminated at the 2511 but the
> 2511 redirects you out line 1 directly, so your not
> getting a console/terminal session from the 2511. If
> you telnet to the 2511 then out line 1,
+main memory be used for one another when a router is in
operation? Thanks for any advice.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5711&t=5711
--
FAQ, list archives, and subscription info: http://www.groups
Start Disconnect Activation
^^xnone - -^Y
The disconnect-character 25, which is a decimal equivalent of Control-Y in
ASCII.
So my question is, will this 'disconnect-character', in this case, it's
control-Y, tell the 2511 to kill the tcp sessi
honeswitch. Thanks for any help.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5705&t=5705
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vi
t out of that
telnet session WITHOUT having to 'close' the telnet application? Once
again, the 'exit' command nor the ctrl-shift-6 x cannot be applied in this
case. Let me know if I'm still confusing you.
-Frank
On Thu, 24 May 2001, Circusnuts wrote:
> OK- you h
; does not work.
I apologize for all misunderstanding. Thanks for any help.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5686&t=5686
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
Hi folks,
I know about the ctrl-shift-6 x. Please read my message again. I am not
telnet'ing from the 2511. I sit on another workstation which is on the
same network as the ethernet segment of the 2511 and I telnet from there.
Please re-read my question. Sorry for the confusion.
-
Below is my config of a 2511. My question is if I sit on another
workstation and telnet to 192.168.1.1 2001 which brings me to R1. Once
I am in, is there a 'key-stroke' I can enter in to have the 2511 terminate
my session? I'm currently closing out my telnet application to have the
session term
help.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5628&t=5628
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
because bgp can have multiple levels of router-reflector according to cisco.
Thanks,
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5528&t=5528
--
FAQ, list archives, and subscription info: http://www.groups
?
Thanks,
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5525&t=5525
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
work. ;->
>
> Chuck
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> frank
> Sent: Tuesday, May 22, 2001 8:53 PM
> To: [EMAIL PROTECTED]
> Subject: Re: how to enlarge Switching Backplane of 6509 [7:5487]
>
> do
also terminate the line 1 session? I hope you folks will
get the picture i'm describing here. Any help is appreciated. Thanks.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5520&t=5520
--
FAQ, list arc
Engine 2 (with PFC2)
> 2. MSFC2
> 3. 128G Switch Fabric Module
> 4. 16-port GE module (WS-X6516-GBIC or WS-X6816-GBIC)
> 5. Distributed Forwarding Card (DFC)
>
> Until recently this last piece has not been available...
>
> Search CCO for details on these fine products. Bring y
from 32G to 256G?
Thanks
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5487&t=5487
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vi
; ios ,does the flash
and
dram upgrade bring other benefit ,such as packet transfering rate,route
items
calculating and so on?
Any help would be greatly appreciated.
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5371&t=5371
---
Hi folks,
I like to setup a policy so that any traffic destined to 1.1.1.0/24 will
take precedence over the rest. My outbound link is a single T1. Please
throw me a short sample config. Thanks for helping.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5227&am
BY ROOSEVELT GILES
AND CCIE GUIDE WRITTEN BY TODD LAMMLE ,PRINTED BY SYBEX?
thanks
frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5218&t=5218
--
FAQ, list archives, and subscription info: http://www.groups
There is no such thing as stupid question. People have questions so they
ask. We are here to share knowledge. Selfish people like you are a waste
of bandwidth in this groupstudy! Please be a bit more considerate next
time when you send out something.
-Frank
On Thu, 17 May 2001, What'
Hi folks,
I got a Catalyst 3524 with two GBIC modules and two fiber cable that I
would like to trade for a Catalyst 2901 or an equivalent switch that can
do ISL/802.1Q and CatOS. Or if you feel you got a decen/equivalent in
value router that you like to trade, please email me directly.
-Frank
Hi folks,
I got a 2511 with 16megs flash and 16megs dram that I would like to trade
for a 2621 router or equivalent. Reply directly to me if interested.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4726&am
Hi folks,
After doing a few sell offs, I end up with 4 sticks of 8meg flash. I
would like to let it go for$60/each. Please email me directly if
interested.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4330&am
Hi folks,
I got a bunch of NP2E(2 ethernets) for cisco router 4000/4500/4700 series
that I would like to trade for any serial, tokenring,isdn,fddi
modules. Please reply directly to me if interested. Thanks.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42
I'm proud of you. Go Vietnamese! I'm taking my lab this November
also. I hope I will be the second Vietnamese person who will send out
such good news to the group.
-Frank
On Thu, 10 May 2001, DUNG H. LE wrote:
> May 7-8, 2001 - RTP Lab facility
>
> This was attempt 2.
Hi folks,
I would like to trade my 2511(terminal server) router that comes with
16megs of flash and 16megs of dram and my Catalyst 1924 EN menu-driven
switch for a Catalyst 2900 that does CatOS or a CAT5000. I don't mind
paying a bit extra for the CAT5000. Please reply if interested.
-
Hi folks,
I have a 1601 router with 4meg flash and 16meg dram and a 2501 router with
16megs of flash and 16megs of dram that I would like to trade for either a
Catalyst 2901 that runs CatOS. Please reply if interested.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&a
i guess it refers to "ctrl+shift+6",which is called escape sequence.
"frank" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thanks,
>
> frank
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Rep
Thanks,
frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2422&t=2422
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
e my 4000m talk dhcp
on its ethernet interface? I have tried numerous ios images, such
as the ones above 12.1(2)T, but I got no luck yet. Thanks for any input.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1573&t=1573
-
Hi guys,
I have a Catalyst 3524 XL Enterprise that I would like to trade for a
switch that can do catOS. I can add in a 2501 router if needed. Here is
a sh verion of my switch:
I can add in some money if needed.
cat3524#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Sof
channlized T1 has internal CSU/DSU,the other two don't ,as far as know
"frank" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> What is the difference between channlized T1 adaptor ,T1 adaptor and
PA-4T+
> on 7507 router?
> And on what circumstance
What is the difference between channlized T1 adaptor ,T1 adaptor and PA-4T+
on 7507 router?
And on what circumstance should one be used,not the other one ?
Thanks,
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1062&am
the trunk.
Hope this is of help.
Regards,
Frank.
>Date: Tue, 17 Apr 2001 17:01:29 -0400
>From: "[EMAIL PROTECTED]"
>To: [EMAIL PROTECTED]
>Subject: vlans and broadcasts [7:984]
>Reply-To: "[EMAIL PROTECTED]"
>
>Does VTP pruning have to be enabled in ord
ed,some is 2M ,some is 64K maybe ,or
128k.
I want to use one port on 4T for several low speed links ,one specific port
for
a 2M-link 2620.This will be a mixed config,point to multipoint and point to
point .
is this applicable or reasonable?
Any recommendations are appreciated.
Frank
"Chuck Lar
e.g. 1- or 2-port Channelized E1/ISDN PRI balanced
Thanks,
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=877&t=877
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
help would be greatly appreciated.
Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=875&t=875
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondi
3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read ONLY)
8192K bytes of processor board System flash partition 2 (Read/Write)
Configuration register is 0x2102
Thanks for any
[demime could not interpret encoding binary - treating as plain text]
I don't have the answer to your question however, I wouldn't pay for it.
It's no required at all for CCNA.
Regards,
Frank.
>Date: Wed, 11 Apr 2001 00:03:40 -0400
>From: "Joe Dewberry"
>To: [
AN is for
WAN connections...
3) Can I configured an "ip unnumbered" on a BVI interface??
Thanks,
Frank.
Are you a web investor? Free email at http://www.webinvestor.com.au
EquityCafe: for web investors. Click here: http://www.eq
[demime could not interpret encoding binary - treating as plain text]
John,
With this info. you gave to us, I could find the following bugs as possible
reason of the problem you are having:
Bugs id:
CSCds62893, CSCdj65763, CSCdi60761 and CSCdk45874.
Regards,
Frank.
>Date: Tue, 10 Apr 2001
ia
telnet. Thanks for any input.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Thanks for any input.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ll be
force to use the 3.0 vpn client? Thanks for any input.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I cut out the redundant
ones.)
Well here are the configs...the relevant portions anyway. Any advice would
be greatly appreciated. Thanks again, Frank
!
hostname HEADQUARTERS
!
username SATELLITE-1 password 0 cisco
!
isdn switch-type basic-ni
!
interface BRI0
no ip address
encapsulation pp
le? What did I miss?
Can anyone assist me in understanding why this didn't work? and perhaps, if
possible, how can I get it to work both ways with 2 dialer ints to the same
destination in opposite directions?? Thanks, Frank
12:11:56: BR0 DDR: rotor dialout [priority]
12:11:56: BR0 DDR: Diali
Can this be done on a router using QOS? If so, please give me
some details. Thanks.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
stacked?
I am not sure about the correctness ,
any help is greatly appreciated.
Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Eric,
I ran in the exactly same problem as you were having. And 'no fixup smtp
25' was the fix.
-Frank
On Wed, 21 Mar 2001, Eric McMasters wrote:
> I have PIX 515 w/5.3(1) IOS running and I ran into a problem with SMTP
> connectivity between two Exchange servers. I have the
Check default gateway in Solaris.
Frank.
>Date: Wed, 21 Mar 2001 18:31:33 -0800 (PST)
>From: Zhiping Li <[EMAIL PROTECTED]>
>Subject: a strange question!
>To: [EMAIL PROTECTED]
>Reply-To: Zhiping Li <[EMAIL PROTECTED]>
>
>hi,everyone
>I encountered a strange
native vlan has been
properly configured.
Frank.
>To: [EMAIL PROTECTED]
>From: [EMAIL PROTECTED]
>Subject: Re: BRIDGE GROUP!!
>Date: Wed, 21 Mar 2001 19:22:16 -0500
>Reply-To: [EMAIL PROTECTED]
>
>The following is based on bridge groups configured on Bay equipment. I b
n the motorola to the
ethernet port on a 2514.
-frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
If the image you are trying to upgrade to is less than 4Mb and it is not allowing you
to do that, you may have a corrupted flash memory. Which means HW replacement.
Frank.
>Date: Tue, 20 Mar 2001 21:38:29 -0800 (PST)
>From: Arun Upadhyay <[EMAIL PROTECTED]>
>Subject: RE: Cisco 2
Arun,
Check that the image's size you are trying to upgrade to will fit into bootflash:
Frank.
>Date: Tue, 20 Mar 2001 20:18:39 -0800 (PST)
>From: Arun Upadhyay <[EMAIL PROTECTED]>
>Subject: Cisco 2510 problem
>To: [EMAIL PROTECTED]
>Reply-To: Arun Upadhyay <[EMAIL
Hi there,
Could someone explain why (in some cases) is required to configure secondary ip add
and how to do it?. Is there any good doco (URL) you may point me to.
Thanks,
Frank.
Are you a web investor? Free email at http
will look like IOS router.
Note: I personally prefer the hybrid (less bugs).
Frank.
>To: [EMAIL PROTECTED]
>From: "Jit Cherng" <[EMAIL PROTECTED]>
>Subject: Re: Questions for Cisco switches
>Date: Tue, 20 Mar 2001 22:57:51 +0800
>Reply-To: "Jit Cherng&qu
Robert,
VTP pruning is a good idea however,based on experience, I would suggest to clear the
vlans from the trunk instead of pruning them. I've seems this protocol causing
issues...
Frank.
>From: "Lopez, Robert" <[EMAIL PROTECTED]>
>To: "'Peter V
I think it is a plausible question , because Cisco is positioning the
Cat6509 as a optical services router. The new router 7600 is a Cat6509 with
OSM (Optical Service module) module
>From: "Peter Van Oene" <[EMAIL PROTECTED]>
>Reply-To: "Peter Van Oene" <[EMAIL PROTECTED]>
>To: "Frankie"
so you mean we don't need to link 2 6509 directly using GEC,right?
For 2 core swithes,when should they be linked together and when should not?
Thanks a lot,
frank
""Santosh Koshy"" <[EMAIL PROTECTED]> wrote in message
992gdp$m99$[EMAIL PROTECTED]">news
connected with GEC technology and apply HSRP on them ?If they don't have
links ,which link should a 4003 choose to visit internet?
Thanks,
Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduc
Please contact me offline if you can sell high volume FLASH/RAM for cisco
routers. Thanks.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
000, but it did not accept
the command 'ip address dhcp' on the ethernet interface. Anyone knows
which ios code will support dhcp client on an ethernet interface for a
4000 series router? Thanks for any help.
-Frank
_
FAQ, list archives, and subscripti
Hi folks,
Anyone able to get tftpserver to run on redhat 7.0? I was able to to run
it in 6.x. And I would hate to have a tftpserver running on a windows
box because most of the work I'm doing is through remote. And no, I would
not downgrade my redhat box to 6.2. Thanks for any help.
-
Named access lists don't suffer from the 100 limit. Try using those and see
if it helps. Otherwise, consolidate all the customers who have the same
rate limits into one access-list. This should free up quite a few access
list slots. I doubt that you offer 100 different types of rate-limits r
I tried that at. All I got from IOS was something to the effect: You cannot
use a local interface for this operation'
I guess what your trying to say is use a loopback on a different router from
the one where you want the SAP's advertised form. This doesn't seem to make
a whole lot of sense h
I have a date of September 12th at Halifax . I would like to swap for
another date between june and july in halifax ...
Send me email if you are interested .
Frank.
_
Get Your Private, Free E-mail from MSN Hotmail at
ndwidth in this scenario
vs. the a fractional T3, committing at 4.5mbps ? Which one is better?
Thanks,
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi:
Check This!
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
that too much or too little? Can a network max it out? Thanks for any
input.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hey guys,
I got eth0= security0 and eth1=security100. I'm able to telnet from the
inside network. Is there any way for me to telnet from the outside? Pix
has disabled this by default.
-Frank
_
FAQ, list archives, and subscription info:
upgrading to 5.1? I have 2megs of flash and 32megs of ram. Any input is
appreciated.
-Frank
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
EQ'ers out there)
Frank
DP/NP (Voice), Lab 3/14
--- Jeff McCoy <[EMAIL PROTECTED]> wrote:
> I ordered 5 60pin back to back cables...they came
> quickly and all worked
> finebest price that I could find...better than
> ebayetc.
>
> "fartcatcher"
Hi group,
In a hub and spoke frame relay scenario, I set up point to multipoint
subinterface at the hub. I then configure a frame map statement for each
spoke to its respective dlci. At the spoke, I used physical interface and
map the ip address of the hub and another spoke to the same dlsci.
I am interested. Does any know what is the secure way to pay and to ship the
routers?
Frank
>From: Luke Ellezer <[EMAIL PROTECTED]>
>Reply-To: Luke Ellezer <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: Off topic - Routers for sale!
>
I was thinking about CRB and writing about IRB, what a knucklehead!
Good point about DLSW not performing local translation Flem.
>From: Flem <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>CC: [EMAIL PROTECTED]
>Subject: Re: DLSW+ question
>Date: Wed, 31 Jan 2001 03:54:07 -0800 (PST)
>
>Well , I do
First erase the second partition with 'erase flash'. You will be prompted
for the info it needs. Once you have successfully done that, go to global
config and type 'partition flash 1 16'
>From: "Brian Lodwick" <[EMAIL PROTECTED]>
>Reply-To: "Brian Lodwick" <[EMAIL PROTECTED]>
>To: [EMAIL PRO
201 - 300 of 566 matches
Mail list logo