Appreciate if you could let me know of any good site to know more about VPN
Thnaks
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is there any good resource to know more about VPN
Thanks
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I am studying from the Cisco Press Book by catherine Paquet and Diane Teare
Its quiet good and covers from teh exam point of view
Regards
Gayathri
Manny Colon <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I just purchased the CCNP Ro
bozx is configured for full duplex, since it was
previosuly operating in full duplex mode.
Thanks in advance for any inputs
Regards
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondiscl
How much can a CCNP with SUN certification expect with 6 yrs experience in
varying fields ?
"Mask Of Zorro" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> The DC market rate for CCIE's is around $125. This varies with how long
you
> have been a CCIE and w
www.solarwinds.com
"Sim, CT (Chee Tong)" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi..Dear all, just a short question where can I download the free TFTP
> server and install on Windows NT or Linux?
>
> Tong
>
> =
Thanks for all the varying thoughts,
It is good to hear first hand information from like minded people than to
visit some recruiters/head hunters web sites and make wild guess.
It looks like CCIE is the ultimate. These middle level certificates only
land you in a sys admin job..
"Mask Of Zor
servers is for redundancy.
Please note that they are independant of each other .
Does this mean that , when the client is requesting, the router first
forwards to the first DHCP server and since it is not getting a response ,
is dropping it?
Thanks
Gayathri
servers is for redundancy.
Please note that they are independant of each other .
Does this mean that , when the client is requesting, the router first
forwards to the first DHCP server and since it is not getting a response ,
is dropping it?
Thanks
Gayathri
the first DHCP server and since it is not getting a response ,
is dropping it?
Thanks
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
We are suing NT Servers for DHCP.
Thanks for the ideas.
Gayathri
Mel Chandler PMI <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Or turn debug on and watch the communication happen.
>
> Mel L. Chandler, A+, Network+, MCNE, MCP
It was a typo error, I hope u understand that
Thanks
Gayathri
Jon Krabbenschmidt <[EMAIL PROTECTED]> wrote in message
DDBCC652E597D311BB6A009027AE9F97041E0EF7@SMV-EXCHANGE">news:DDBCC652E597D311BB6A009027AE9F97041E0EF7@SMV-EXCHANGE...
> This will be a suit worth watching! I
While I do agree that you need to do a bit of research before coming to psot
your problems, I think there are some members out there who get irritated
when people do ask questions. After all this site is for knowledge sharing
and I personally feel that it is always good to talk to people of the
welcome
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I tried looking at the web site for more news on this..
Any links on the CIsco Web Site for this?
Thanks
Robert Padjen <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Slightly OT.
>
> Cisco is announcing a number of security holes in
> certain versions of th
Any idea what is the passing score for BSCN?
Thanks..
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi
I have installed Solaris on Intel .
Whenever I try to use " eject cdrom" command I get the error message
"inappropriate ioctl for device" .
What could be the reason. anyone having the same problem I have tried
stopping and starting the volume manager as well.
Once I reboot its seems to
Am I right to say that if I set the port speed to auto , the duplex setting
is also set accordingly? Or should we manually set it to full duplex?
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
.
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Group.
Is the situation really that bad as we are hearing ? If so , then I guess we
need to rethink of these certs. For people who are in the process /mid-way
to acheive these certs its disheartening to know that they are not of the
same value anymore.
I heard that a lot of CCNP guys are on
of the
time by server, network and application.
is there any way to acheive this result?
thanks and regards
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
yes , cisco has an authorised training centre in India. Even for CCIE exams
you can take the lab exams in Bangalore.
Training institutes which offer this courses are MicroLand, Datacraft.
checkout at www.microuniv.com
"RALPHJFRANCIS" <[EMAIL PROTECTED]> wrote in message
98uhkr$rsn$[EMAIL PROTE
Hi,
Is there a way to simulate an ISDN connection in a lab setup?
I have 2 25xx routers.
thanks for the input
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Hi,
Is there a way to simulate an ISDN connection in a lab setup?
I have 2 25xx routers.
thanks for the input
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Well said. I totally agree with your view points.
Paul Werner <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> **WARNING - VERBOSITY BIT IS SET. DELETE IF YOU ARE TIME
> CHALLENGED**
>
> Priscilla makes some excellent points below. I agree with her
> totally
Hi
I have passed the book using Cisco Press book.. That is sufficient and
covers all the topics.
Just be thorough in all the chapters and the exam will be a cake walk.
Gayathri
- Original Message -
From: Srihari Babu <[EMAIL PROTECTED]>
To: Gayathri <[EMAIL PROTECTED]&
Hello
I have a strange problem here. WE upgraded our AS400 system. The AS 400 is
equipped with a fddi card and a fast ethernet card both on 2 different
vlans.
When I try to connect from my NT server to the AS400 the session keeps
timing out. This problem occured only after the upgradation.
out
12C11B@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF8620112C11B@UBDCCOMJHBEX...
> what kind of upgrade was done on the AS400??.
> How does the AS400 connect to the network?? STUN, DLSW
>
> -Original Message-
> From: Gayathri [mailto:[EMAIL PROTECTED]]
> Sen
the Dr Watson Error has disappeared.
Best Regards,
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
layer,
everything looks okay.
The network is liek this
user PC - access layer switch - distribution layer - core layer
This Ip address I try to ping is on the FDDI ring in the core layer, its an
AS400 Box
ANy ideas why htis could happen.
thanks
Gayathri
_
FAQ
we had HSRP.
We had to reboot the RSM , manually i.e, remove the card and insert it back.
Is this a common thing that we cant stop the debug ip error process.
Thanks
Gayathri
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
You can get the cisco press book for routing . its good enough to pass the
exam
and if you are in India its available for around 500rs.
As a reference you might also want to buy the book ' switches bridges
routers for ccie' by andrew caslow
"Sateesh C" <[EMAIL PROTECTED]> wrote in message
[EMA
I see a lof or LLC error on the FDDI ring when i used sniffer. The rate at
which it is increasing is mind boggling.
Would anyone know what would be the possible causes for this ?
Thanks
Gayathri
_
FAQ, list archives, and subscription info: http
Hi,
If i have a statement 'ip cef' in the router, does this mean I have enabled
netflow?
Under the interfaces , the configuration is
no ip route-cache cef
no ip route-cache distributed
Thanks for any inputs...
Regards
Gayathri
Message Posted at:
http://www.groupstudy.com/form/
ut options ani_server_name username password
You can obtain the name of the ANI Server by viewing the file
etc/cwsi/ANIServer.properties. This file is located in the product
directory.
refer CW online help
Gayathri
"Jeff Duchin" wrote in message
[EMAIL PROTECTED]">new
yes lucent vital suite is cool and easy to set up, web based and very user
friendly
Gayathri
"anthony" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know any good tools that I could use to get a network
baseline?
> I need to get one and
Cisco Works - User Tracking
"Todd Kari" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Would anybody please advise of a utility that scans a network for a
> particular MAC address. I need to know where certain computers are
> logging-in from and their current dynamically assigne
Can you use CW2k to do a search on multiple switches for a specific MAC
address so that I can find out which switch and port the MAC address is
from? Or do you know what will do it? It's a pain to look at multiple
switches to find the MAC address. Thanks.
Yes you can
Gayathri
"
Hi Group,
Just finished Routing, pass mark 690, got 862.
Thanks to lot of inputs given here and the kowledge shared by the experts...
Gayathri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9488&t=9488
--
FAQ, list
Hi Group,
Just finished Routing, pass mark 690, got 862.
Thanks a lot for the inputs given here and the knowledge shared by the
experts...
Sorry for the repeat post ...there were a lot of typo errors in the previous
one.
Gayathri
Message Posted at:
http://www.groupstudy.com/form
advance,
Gayathri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9723&t=9723
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations t
need sot be enabled at the
router, and the router has to just forward the packets, since win2k is
handling the ipsec.
Any thoughts??
Gayathri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12223&t=12223
--
FAQ, list
need sot be enabled at the
router, and the router has to just forward the packets, since win2k is
handling the ipsec.
Any thoughts??
Gayathri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12225&t=12225
--
FAQ, list
make sure you don thave the command 'no keepalive' in the interface which is
affected
"Hire, Ejay" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Based on what I'm seeing, I think there is a problem with the data
returning
> from the telco cloud. Can you loopback the CSU/DSU an
Hi Group,
Just passed the last paper CIT today
Would like to thank everybody for sharing their invaluable knowledge here.
Gayathri
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=13069&t=13069
--
FAQ, list archi
Hi Group,
Any thoughts pertaining to this ??
There are 2 locations connected via fast ethernet . Both locations have 7507
routers.
There is a need to replicate files among these two locations . But it seems
that the transfer is very slow.
So In order to speed up the transfer, our AS400 system
Hi
Where can I find the Token ring White paper?
Thanks
Gayathri
"Oliver Nadalin" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Passed the written today - here are my thoughts:
>
> If you are a CCNP in good standing you shouldn't have a pro
Thanks
-Original Message-
From: Prabhu K. [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 31, 2001 6:52 AM
To: Gayathri
Cc: [EMAIL PROTECTED]
Subject: Re: Thoughts on CCIE Written [7:14116]
Hi Gayathri,
You'll need to configure TRANSLATIONAL bridging between your Token
Hi Group,
Is it possible to load balance between a 2Mb link and 1Mb link on a cisco
router running OSPF, since they are not equal bandwidth?
Appreciate if anyone can enlighten how we can acheive this? A quick search
on cisoc site did not furnish much details for me. Apart from tuning the
cost is
Howard,
Thanks for the input
""Howard C. Berkowitz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >Hi Group,
> >
> >Is it possible to load balance between a 2Mb link and 1Mb link on a cisco
> >router running OSPF, since they are not equal bandwidth?
> >Appreciate if anyone ca
Take a look at CISSP.
www.isc2.org
this is a good cert to own
""G.E. Murphy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello fellow professionals. I hope your quests for Cisco certifications
are
> going well. I have a question and am curious of your opinions. I have CC
Hi Group,
Below is the configuration of my router. Serial 1/0 is a 2m link and serial
1/1 is a 1m link . By configuring as given below, will I be able to acheive
load balance between these 2 links , I am running OSPF.
interface Serial1/0
description 1st 2M link
bandwidth 2000
ip address 17
Hi Group
Is there any document or white paper for references with regarding ot
merging of two networks, redistribution etc..
Thanks...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18930&t=18930
--
FAQ, list archives, and sub
yes, i also have the same problem with win2k server and hyperterminal, i
just keep getting the error message , "cant open the com port"
""jimmy halbert"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am trying to get hyperminal to work wih 2000 Professionalno such
> luck.
54 matches
Mail list logo