I remember their was a link to get 2 boot romms, does any one know it.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Saturday, August 24, 2002 7:13 PM
To: [EMAIL PROTECTED]
Subject: RE: NEWS! Cisco Boot Proms No Longer Available. [7:51989]
Thats a lie.
Has anyone here experienced problems with the new ios 6.2 on the pix. I
have noticed when I installed it that some users can connect to the
internet until I issue clear xlate command.
These are my current timeouts:
timeout xlate 3:00:00
timeout conn 12:00:00 half-closed 0:10:00 udp 0:02:00
rip
network 192.1.1.0
Note:
Again , Commands to check the frame-relay DLCI maps, and LMI signaling
and PVC statuts
Show frame pvc
show frame map
show frame lmi
Ping your remote sites
Hope this helps
Jorge Rodriguez
CCNA/CCNP/ CCIE Candidate
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
rip
network 192.1.1.0
Note:
Again , Commands to check the frame-relay DLCI maps, and LMI signaling
and PVC statuts
Show frame pvc
show frame map
show frame lmi
Ping your remote sites
Hope this helps
Jorge Rodriguez
CCNA/CCNP/ CCIE Candidate
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
rip
network 192.1.1.0
Note:
Again , Commands to check the frame-relay DLCI maps, and LMI signaling
and PVC statuts
Show frame pvc
show frame map
show frame lmi
Ping your remote sites
Hope this helps
Jorge Rodriguez
CCNA/CCNP/ CCIE Candidate
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
rip
network 192.1.1.0
Note:
Again , Commands to check the frame-relay DLCI maps, and LMI signaling
and PVC statuts
Show frame pvc
show frame map
show frame lmi
Ping your remote sites
Hope this helps
Jorge Rodriguez
CCNA/CCNP/ CCIE Candidate
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL
with the destination address, RIP version 2 is the case,
great for subneting, VLSM.
Jorge
Matt Saunders wrote:
Hi Group,
Im really struggling to understand the requirement in using the ip
classless
command when you are configuring a default route.
I noticed that RIP 2 is a classless
at least two power supplies would be required to run
the unit.
Jorge
[EMAIL PROTECTED]
[EMAIL PROTECTED]
ccna/ccnp/ccie wannabe
Jeffrey Reed wrote:
Im trying to understand power redundancy in the Cisco 4006 switch. Reading
through the online information, Cisco seems to imply you must have
www.layer7labs.com
www.kg2.com
Jorge
The Edward Groove wrote:
Has anyone done any research on cheaper, yet compatible memory for the
2500 series routers? I'm looking for some cheap flash and DRAM for this
line. Does anyone have any specs--or even better--manufacturer model
names
remove passwords and login configuration on VTY 0 4 lines.
Jorge
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Johnson, Richard (NY Int) wrote:
Hi All,
How do I disable Telnetting capability to my 3640. I only want
console access.
Thanks,
Rich
Message Posted at:
http
.
These commands will pin-point which bridge-port on the switch the
MAC-address comes from.
Jorge / CCNA CCNP / CCIE Wannabe /
[EMAIL PROTECTED]
[EMAIL PROTECTED]
http://www.learncisco.n3.net
Jeffrey Reed wrote:
What utilities are you guys using to find MAC addresses across a large
.
These commands will pin-point which bridge-port on the switch the
MAC-address comes from.
Jorge / CCNA CCNP / CCIE Wannabe /
[EMAIL PROTECTED]
[EMAIL PROTECTED]
http://www.learncisco.n3.net
Jeffrey Reed wrote:
What utilities are you guys using to find MAC addresses across a large
Check out these links for labs:
www.layer7labs.com
www.kg2.com
Or contact Ozzi by email at [EMAIL PROTECTED] , he is a cisco
instructor as well as cisco-lab reseller.
Jorge / CCNA CCNP / CCIE wannabe
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Siva wrote:
Hi All
I just cleared my ccie
That's something. I am not surprise by the bellow statement. I am a Cox
subscriber and since day one I noticed the level of tech support.
Cox just don't want to pay intellectual techs that are capable of
supporting Cisco cable modems, they just don't have the brains
Jorge
Cebuano wrote
PROTECTED]]On Behalf Of
jorge rodriguez
Sent: Sunday, April 07, 2002 12:07 AM
To: [EMAIL PROTECTED]
Subject: Re: Finding a MAC address [7:38560]
Depending on varios scenarios:
Assuming the following:
If users worksations are WindowsNT stations and properly configure WINS
servers you can simply
)
ntp server ip-address
This way your switch will sync and pick the right time.
Hope this helps
Jorge / CCNA CCNP / CCIE wanabe )
[EMAIL PROTECTED]
[EMAIL PROTECTED]
http://learncisco.n3.net
Phil Lorenz wrote:
Any ideas on this one.
I have a 2900XL and it's stuck in 1993. I see
.
2 - By CLI on IDS (./idsupdate /
), but i dont have the ip address,
directory and the password.
Anybody have any sugestion ?
Thanks,
Jorge Luis
Ten Sistemas e Redes
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=18098t=18098
Hi ,
I will do the CSVPN, CSPFA and CSIDS test.
Anybody do tests ?
thanks,
Jorge
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14178t=14178
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Hi ,
I will do the CSVPN, CSPFA and CSIDS test.
Anybody did the tests ?
thanks,
Jorge
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14180t=14180
--
FAQ, list archives, and subscription info: http
Hi ,
I will do the CSVPN, CSPFA and CSIDS test.
Anybody did the tests ?
thanks,
Jorge
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=14184t=14184
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
it, it seems to be pretty powerful.
Regards,
Jorge Hurtado
Network Quality Manager
ALO Comunicaciones
Spain
From: "Okuwa, Daley" [EMAIL PROTECTED]
Reply-To: "Okuwa, Daley" [EMAIL PROTECTED]
To: "'Circusnuts'" [EMAIL PROTECTED], [EMAIL PROTECTED],
carmelo Garofalo
it, it seems to be pretty powerful.
Regards,
Jorge Hurtado
Network Quality Manager
ALO Comunicaciones
Spain
From: "Okuwa, Daley" [EMAIL PROTECTED]
Reply-To: "Okuwa, Daley" [EMAIL PROTECTED]
To: "'Circusnuts'" [EMAIL PROTECTED], [EMAIL PROTECTED],
carmelo Garofalo
Hello all.
Does anybody know if Cisco gives training to use Netflow (Analyzer) ???
If yes, where in Europe and how much ???
(If someone knows courses in Spain or can give me a clue, it would be great)
Thanks in advance.
Jorge H
html
DIV
PWell you don't have vty passwords on 1900 switchs. You have to configure the enable
password, the ip address and the default gateway of the switch so you can telnet on
it./P
PRegards./P
Pnbsp;/P
PJoao Peixoto/P
PBRBRnbsp;/P/DIV
DIV/DIV
DIV/DIVgt;From: quot;Jim Dixonquot;[EMAIL
misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-541-4197 Evenings
http://www.netwire.n3.net/
http://www.learnci
input.
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-541-4197 Evenings
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
iWon.com http
me at [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294 Day
1-617-541-4197 Evening
iWon.com http://www.iwon.com why wouldn't you
. I hold eight years experience in computer networking, and one year
solid experience with cisco products.
Thanks
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-541-4197 Evenings
http://www.netwire.n3.net/
http
in Boston, so I would prefer a Massachusetts buyer, all others are
welcome as well.
If interested you can contact me at 781-614-1294 or email me at
\mail{[EMAIL PROTECTED],[EMAIL PROTECTED]}
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781
Brand New Cisco 2503 Router for sale, never used.
Specs
1 AUI-Ethernet
1 BRI WAN Port / Built in ISDN
2 Serial WAN Ports / Frame-relay or Point-to-point
1 Console Port
1 Aux Ports
IOS Ver 11.3
8 Megs Flash
10 Megs DRAM
Accessories Included
One Ethernet-RJ45 AUI Transceiver
One Console Cable with
Go to the groupstudy.associate group for more information. I passed the exam
last week. It is really difficult. Study and have a lot of working
experience with designing of new and heterogeneous networks.
""McCallum, Robert"" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
.uk...
standard,
hoping that this is not a theory.
Jorge
--Original Message--
From: "NetEng" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: September 25, 2000 6:25:31 PM GMT
Subject: Upgrading to Cisco switches
I am upgrading my network from Bay/Compaq/Misc. switches to Cisco switche
compression at
both routers serial interfaces to do software compression "stac", to see if
the backup time frame would take less than 8 hours. None of the routers have
CSA adapters, so the compression will have to be software/CPU based.
Anyone have had experience with this ?
Thanks
Jorge Rodri
Check the following webpage for Jobs, www.monster.com
Good luck
Jorge
--Original Message--
From: Stephane Wantou Siantou [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: September 19, 2000 6:10:33 PM GMT
Subject: Jobs
Ho Everyone,
I am about to become CCNP (by the end of the month
/www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Net
y.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Eve
ED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 0
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston
ble
to use the calculator??
Pedro
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CC
I found this website which has excellent reports on DSL and its providers.
Enjoy
http://www.dslreports.com/
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwire.n3.net/
http
I believe it is 750.
--Original Message--
From: "Nischal Chandra" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: August 6, 2000 2:20:35 AM GMT
Subject: [No Subject]
What is the minimum required for pass in the New CCNA 2.0
Thanks
Nischal
Jorge Rodriguez /CCNA
Network
This replay is for the fellow with so many degrees certs!!
Not happy ? Sounds like you picked the wrong career/business !!
Hi,
I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP,
but
still not satisfied. I have seen different job postings that required
master
This replay is for the fellow with so many degrees certs!!
Not happy ? Sounds like you picked the wrong career/business !!
Hi,
I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP,
but
still not satisfied. I have seen different job postings that required
master
This replay is for the fellow with so many degrees certs!!
Not happy ? Sounds like you picked the wrong career/business !!
Hi,
I have my B.A in Computer Information System, A+, MCSE, CCNA and CCNP,
but
still not satisfied. I have seen different job postings that required
master
cognise this command and there is no mention of ipx in
the help in the exec.
Can this router handle ipx and if it can, how?
Stuart
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.
done.
I completely agree, someone didn't know what they were doing !
--Original Message--
From: "joel.studtmann" [EMAIL PROTECTED]
To: Jorge Rodriguez [EMAIL PROTECTED], jeongwoo park [EMAIL PROTECTED],
[EMAIL PROTECTED]
Sent: July 13, 2000 12:03:04 PM GMT
Subject: Re: Someo
PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Network
address at http://mail.yahoo.com.hk
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
ines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
ED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 0
/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http:
What about seting the register to 0x2141, this should work,
this register setings is for disater recovery.
--Original Message--
From: "Kenny Sallee" [EMAIL PROTECTED]
To: Jorge Rodriguez [EMAIL PROTECTED], kenny [EMAIL PROTECTED],
[EMAIL PROTECTED]
Sent: July 10, 2000 12:08
it boot up from flash again ??
Thanks
ken
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodri
from
functioning properly.
i am also looking it up on the cisco web site but if anyone knows the
solution first do post it :)
Regards
Atif
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-989-8634 Evenings
http://www.netwir
like that which will prevent it from
functioning properly.
i am also looking it up on the cisco web site but if anyone knows the
solution first do post it :)
Regards
Atif
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
1-617-9
to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
iWon.com http://www.iwon.com wh
eport misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CC
.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.
ED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
to [EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
isconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
iWon.co
memory
0x2102 ENTER
Then change back the boot sequence register back to its original setings
REBOOT the router
Hope this helps
Jorge
--Original Message--
From: "Shane Stockman" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: June 26, 2000 10:57:32 AM GMT
Subject: Passwor
://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http
ct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
iWon.com http://
"Avarage erros"
Avarage Utilization " and so forth, I mostly concern myself with Avarage
erros and or collisions.
Hope this helps
Jorge Rodriguez/CCNA
Network Analyst
--Original Message--
From: "Will Klein" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Jun
.
The RJ45 is a connector term design for Ethernet Networks where four pair
coper are used, the signaling on RJ45 10baseT Ethernet uses only two pairs
1,2,3, and 6. I don't know on top of my head the two pairs signaling specs.
Hope this clarifies your question
Jorge Rodriguez/CCNA
Network Services Analyst
misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
iWon.com
the router to enter in rommon ??
Cheers
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CC
ines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112
es, 0 output buffers swapped out
17 carrier transitions
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
rface resets
0 output buffer failures, 0 output buffers swapped out
17 carrier transitions
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://w
Did you try " Clear Counters" ?
- Original Message -
From: "Pete Ruttman (adminpr)" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, May 30, 2000 2:50 PM
Subject: Re: PIX Firewall show connection counters
Is there any commands to clear the counters on a PIX ?
I amtrying to
Pin 6 Orange/White
Hope this helps
Rgrds
Jorge Rodriguez /CCNA
Network Services Analyst
RS Networks Inc
1112 Boylston Street #222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
- Original Message -
From: "Justin Marcus&qu
are Lucent Technologies. This is the best I have seen,
I have used HP OV hummingbird, and nothing compares to Epro.
www.ins.com
Jorge Rodriguez /CCNA
Network Services Analyst
RS Networks Inc
1112 Boylston Street #222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3
Try www.cciebootcamp.com
Jorge Rodriguez /CCNA
Network Services Analyst
RS Networks Inc
1112 Boylston Street #222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent
Point-to-Point DS3 alouds more security. That is, from the telephone
carrier providing the T3 pipe to the custumer will not be shared by others.
In other words, the DS3 from the SONET card/module data traffic going
through it will be for that cutomer only. This could be one reason !
-
roup is also a great start. Another excellent
site is www.ciscoinanutshell.com this on is awesome .
Good luck
Jorge Rodriguez /CCNA
Network Services Analyst
RS Networks Inc
1112 Boylston Street #222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
http://www.learncisco.n3.net/
--
Try www.netsys.com go to
technical library .
You can find TCP/UDP port numbers by
protocol
Jorge Rodriguez /CCNANetwork Services
AnalystRS Networks Inc1112 Boylston Street #222Boston, MA
021151-781-614-1294http://www.netwire.n3.net/http://www.learncisco.n3.net/
- Original
ing Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Jorge Rodriguez /CCNA
Network Analyst
RS Networks Inc
1112 Boylston Street
Suite 222
Boston, MA 02115
1-781-614-1294
http://www.netwire.n3.net/
iWon.com
I am looking for the following to trade:
I need
1)RouterSim CCNA network server version 2.0 - 1 installation
2)CCDA Courseware Library
I have to trade:
1)CiscoWorks2000/Resource Manager Essentials Version: 2.2/Latest version
2)From TCT (Advanced Cisco Router Configuration )
Jorge
82 matches
Mail list logo