I have a question regarding L3 switches and security
If I have for example an catalyst 3550 swithc with 30 vlans, and don´t want
traffif flowing from vlan to vlan, I just want to allow traffic from the
vlans to go to a special server vlan, and then the internet, but there are
also some groups of v
Hi I am trying to configure prioryti queuing on a cisco 828 router, I can
create the priority-list just fine, but can´t apply it to any interface, in
interface config mode, the priority group command is missing, any ideas on
why that is ? and how I can work around this problem to give certan traffi
Here are the Global and NAT statements
global (outside) 1 213.213.128.100-213.213.128.200
global (outside) 2 213.213.128.50
global (dmz) 1 192.168.17.150
nat (inside) 0 access-list 100
nat (inside) 2 157.157.144.49 255.255.255.255 0 0
nat (inside) 2 10.100.0.0 255.255.0.0 0 0
nat (inside) 1 0.0.0.
why would I see the folowing when I do sh xlate on the pix, i.e.
one global address is beeing translated to the next in line global address ?
and sugestions would be welcome
Global 213.213.128.143 Local 213.213.128.142
Global 213.213.128.142 Local 213.213.128.141
Global 213.213.128.137 Local 21
[EMAIL PROTECTED] wrote:
> Hi guys,
>
> Just a quick one and am sure this has been asked many times.
>
> Two rtrs with serial line between them. On one router
>
> !
> hostname QOS-RTR1
> !
> class-map Data-Service
> match access-group name Data-Hosts
> !
> class-map Voice-Service
> match acc
Yes, I am receiving a few mails from "Nobody" :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Puckette, Larry (TIFPC)
Sent: Friday, July 25, 2003 9:26 AM
To: [EMAIL PROTECTED]
Subject: NOBODY emails [7:72997]
Is anybody else receiving multiple emails
Hi
I have some catalyst 2950 and 3550 switches, that I need to control the mac
addresses of the machines that are alowed to connect to the switches, i.e.
something similar to port security, but i dont want to configure it per
port, but rather for a whole switch or vlan, what would be the best way
Jay Greenberg wrote:
> Has anyone noticed that a 16MB flash upgrade for the 2500 costs almost
> as much as a 2500 ?
>
> Does anyone know where I can get cheap 8MB flash sticks?
>
http://www.anthonypanda.com/
Excellent prices, if you're not in a hurry (ship from Hong Kong).
Message Posted a
Wilmes, Rusty wrote:
> I've got a frame line thats almost 100% errors, mostly framing. Local
> Hardware is a 1604 w/ t1 wic (for testing purposes only. will be a 3640.)
> Remote hardware for the 6 pvc's are 1604's w/ t1 wics on fractional frame
> lines. Remotes have existing pvcs back to the 364
fdfdfdfd fdfdfdf wrote:
[SNIP]
> DCD=up DSR=up DTR=up RTS=up CTS=up
>
>
> what is the meaning of "dcd=up"?
> thanks.
This is an interesting reference, which contains a lot about
Synchronous Serial ports.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide
>
> > IOS (tm) C3500XL Software (C3500XL-C3H2S-M),
> > Version
> > > 12.0(5)WC3b, RELEASE SOFTWA
> > > RE (fc1)
> >
>
> so pls give me suggestion.
>
> Thanks & warm Regards,
> Milind Tare
>
> --- Jonatha
milind tare wrote:
> Dear All,
>
>
> I have 3500 series switches in my network. i want
> to configure multiple vlan for some ports. right now i
> am using following IOS
>
> IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version
> 12.0(5)WC3b, RELEASE SOFTWA
> RE (fc1)
ment but just stating the Bc=CIR*Tc
rule.
Thanks,
Jonathan
> -Original Message-
> From: Brian McGahan [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, June 18, 2003 2:53 PM
> To: 'Jonathan V Hays'; 'John Smith'; [EMAIL PROTECTED];
> [EMAIL PROTECT
John,
I assume the '25' after each percentage sign in your original post below
is a typo (e.g., "15%25 of bandwidth"). Given that assumption, you want
to assign traffic to three categories, with 15%, 50%, and 35% of the 64
kbps bandwidth.
64000 x .15 = 9600 bps
64000 x .50 = 32000 bps
64000 x .3
??? wrote:
> Hi,
>
> I am setting up 2511 terminal server for my first time, but don't work...
>
> this is my 2511 configuration :
>
>
> line con 0
>
> line 1 16
> session-timeout 20
> exec-timeout 0 0
>
> line aux 0
>
> line vty 0 4
> password
> login
> -
I will post the config, as soon as I am able, but I have a route on both
sides, and can ping,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70621&t=70590
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list
Hi all
I am trying to bring up a tunnel interface, I get up and up, but the
folowing statement is shown when i do a show int tunnel
Tunnel protocol/transport uninitialized
and I can not get any traffic to flow through the tunnel, any thoughts ?
Message Posted at:
http://www.groupstudy.com/form
I thnik its great that you have taken the time to make these courses
avalible online, I am sure it will help a lot of pepole, my self included,
one sugestion, It would be better to download them if you had them on an FTP
Site.
Keep up the good work.
best regards,
Arni
Message Posted at:
http:/
Hi all
I have a question about hosting enviroments,
For example, let say I am running a hosting buissness and I have 15
customers that I host servers for, some of the servers like DNS and such are
shared for all, and some a just for one customer, all the customers have a
high speed link to my net
I have a router connected to a vlan trunk one for internet access, and one
for a remote branch,but then I have a pix that all my users connect throuhg,
and does the NAT, but then of course the users in the remote branch that
connect directly to the border router, cant access the internet as that
ro
I need a little information about, multicast, if I am using multicast within
a single IP network can I use the cisco 2950 switches, i.e. do I need any
multicast protocolls such as IGMP and the like.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66831&t=66831
---
James Gosnold wrote:
> Um, probably a silly one for you all.
>
> I have a 1721 router at either end of a leased line. I telnet into the
> router and:
>
> Router#debug serial int
> Serial network interface debugging is on
> Router#terminal monitor
>
> And nothing. Shouldn't I get some debug messa
Priscilla Oppenheimer wrote:
> The CCNP Recertification Exam was gruelling, and that's no April Fool's
> joke. But I survived it! ;-)
>
> Exam number: 640-851 (the current one)
> Number of questions: 112
> Time: 2 hours
> Passing Score 732
> My score: 834
>
> Is anyone else taking it soon? Here's
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Jay Greenberg
> Sent: Tuesday, April 01, 2003 9:52 AM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: April Fools
>
>
> ftp://ftp.rfc-editor.org/in-notes/rfc3514.txt
>
> --
> Jay Greenberg
> C
Matt,
I would try the advice of Priscilla and Mario. Start with a
simple config and work your way up. Here's a check list:
1. Check the cable and make sure both ends are firmly seated and
are plugged into the correct ports.
2. Set the serial interfaces on both ports back to the default
using
saunders1m wrote:
> I have 2 routers connected back to back via a DTE - DCE crossover cable and
> i am trying to establish a ppp connection though i can't seem to make the
> connection and when i try using debug ppp authentication i get:
>
> 01:57:10: Se0 PPP: Treating connection as a dedicated li
No the PIX does not support IPX only IP, you will need a router for that
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66341&t=66338
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
I have goten it to work in a lab enviroment, i.e. with out using VTP, just
using VTP transperant mode and manualy configuring the vlans on all the
switchs.
Even though I use the "switchport trunk allowed vlan" command to limmit
vlans on the trunk links, VTP still send the whole list through, and t
I was testing this in my lab, and could not get VTP to work with this setup,
as soon as I went over 254 vlans the Cat2950 gave me this message
00:17:11: %SW_VLAN-6-VTP_MODE_CHANGE: VLAN manager changing device mode from
CLIENT to TRANSPARENT.
00:17:11: VTP LOG RUNTIME: VTP mode changed to Transpar
Hi
One question
If I have the need to use many VLANS, let´s say around 400, can could I use
a 3550 switch that supports 1005 vlans as the core, and then 2950 switches
in the wiring closets, but they dont support more than 250 vlans, i.e. can I
use the 3550 with all the vlans, and the just trunk f
& Regards
V Anil Kumar
__
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=
Can I do SPAN monitoring on this switch, for example to do monitoring with a
sniffer ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65733&t=65733
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.
issue the show buffers command to see if the counter
of misses and failed is incrementing. In this case
tune the buffer according to the size of packets u
receive.
Input errors overrun and underrun errors showed in ur
output are linked to buffer allocation problem.
--- Spio Wagus wrote:
> clear t
g=218.1.140.1, len 1514, forward
I am a little confused as to what the above line is telling me, can anyone
please explain ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65419&t=65419
--
FAQ, list archives, and subscription inf
has any one had experince with this
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/keyswtch/ft_its21.htm
Sound like a good idea for small company´s
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65363&t=65363
--
I totaly agree with you about the point of pepole just learning what is
enough to pass the tests, and take them again and again just to pass them,
As I come from a microsoft background and am a former Microsoft MCT traineer
I know this all to well, as it is a even bigger problem on that side.
I wo
Damm routing and switching Spec. exam 9E0-541, I have taken It two times in
two weeks, and failed both times the first time I got 819 need 825, today I
got 777,
I am s pissed, at myself for the mostpart
but this exam is rather hard, atleast the version I got to day, the one I
got last we
I passed it three weeks ago, no to hard
I uesd the Top Down Network Design book, it´s a great book, but I actuly
just got through half of it before the exam.
it´s not that hard, and I took the CCDA, the old version after the CID and i
would say the cid is a little harder, and not as boring i.e. d
Can anyone recomend a good book for CCIE Written preperation ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65104&t=65104
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct a
Hi All
Can someone give me some clues as to what is the best way to go for ATM in
an home CCIE practice LAB, I know about the LS100 and that can be found for
a fair price, but what about the routers and modules ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65087&t=65087
Hi,
I would like to monitor the changes in the x25 vc
established on a router trough snmp. But I was unable
to find the oid which could show me the number of vc
and the associated peering with each vc(because I use
XoT).
I need to know the xot peers because I doing a
migration from one peer to one
In the following secnaryo should there be any problems for the hosts on the
inside of router1 to connect to the hosts on the otherside of the VPN tunnel
inside networkrouter1router2internet
inside of router1 are RFC1918 addresses are used
router1 is doing NAT
in between the router is
I am asembling an CCIE lab at work and just found
http://www.horizondatacom.com
has any one used them, and if so what is your experince
At least the price looks good, I have assembled the folowing list and would
like some comments on it, I already have 2x1005, 2x1003, 2610, 2511-RJ
access server
w
I would say it sound very intresting, sepcialy for those that have call
manager / voice experince.
I wonder how much routing it has, for example, I doubt you have to configure
BGP on this one, or what do you think ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64624&t=64620
--
I there a way to do split-tunneling for vpn clients connecting to a pix with
pptp so that they don´t lose internet conectivity, the clients are using the
microsoft vpn dialar.
any examples of this would be great.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64585&t=64585
ip split-horizon eigrp as-number
no ip split-horizon eigrp as-number
spilt horizon enabled by default on eigrp, using no ip
split-horizon has no effect(only on rip,igrp).
--- Troy Leliard wrote:
> Split Horizon for EIGRP ... dont think so. !!!
>
> Larry Letterman wrote:
> >
> > r3 sends to r2
knowing the
> partciulars, I would advise that
> you change the ospf network type to NMBA on the
> spokes, and use neighbor
> statements on the hub. Also, don't forget to
> manipulate the priorities so
> that the hub router becomes the DR.
>
> Juan
>
> -Original Messag
Hello,
I have an ospf problem. Two neighbors on a nbma
network who have connectivity are unable to go in the
two state, but have establish adjacency with the DR.
I include the configurations and ospf neighbor
states.
Perhaps have I done a mistake or don't know ospf
enough. Can u help please.
Th
Yes I know about the UR, and failover license, but the book gives the
impresion "at least to me" that you require a seprate license from that.
but having looked for it on cisco, I dont think that is the case, so I think
I would just need one UR and one Failover license and with that can do both
no
I have a CCNA and CCNP yesterday I took the CID 640-025, will this do for
the old requierments for CCDP, or will I also have to take the CCDA ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63963&t=63963
--
FAQ, list archives, a
Hi I am reading the Cisco PIX Firewalls book by Richard A. Deal.
and it states that to use the Stateful Failover feature I require a special
license from cisco for the PIX.
I can´t find any information about this license on the cisco website, can
anyone give me some more information about this ?
Please note that under the new structure, Remote Access exam (640-605) will
no longer be a required exam for CCDP. Registration for the current 640-025
exam will end on May 27, 2003, and the existing Cisco Internetwork Design
(CID) course will end-of-life on April 28, 2003. For those candidates who
Hi
When using vlan trunking from a router, for example in a router on a stick
enviroment, I would create subinterfaces on the ethernet interface on the
router, does that in some way limit the use of access-lista to controle
traffic, like traffic between the vlans and out of the router through
ano
I would think that you would have to use the 828 G.SHDSL Router, not an 837
ADSL, as an ADSL connection requires an DSLAM to connect to, but the G.SHDSL
is for point to point
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63712&t=63711
---
In a Core-Distribution-Access Layer design, would you keep the Core L2 or
with high end L2/L3 switches such as the Cat6500 do you think it would be
better to do L3 in the core ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63708&t=63708
Hi all
I am looking for some insightes into a MAN desigin spanning a city using
Fiber Gigabit Ethernet Links.
What I am realy looking for are comments about the pros and cons of a Ring
design vs. the standard Core-Dist.-Acces. design with redundant paths from
the dist to the core.
any thoughts
Can any one recomed a good traning class for the CCIE Written Exam, most of
the CCIE traning programs I see offerd are traning for the lab, after you
have taken the written.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63494&t=63494
Just finished BSCI today, and also my CCNP.
boy the BSCI was realy hard, I think it was harder then all the other
combined.
But thats probably beacuse I dont have that much experince with Routing
Protocols, used the Sybex book, and hands on with my router lab to prepair.
I got a lot on BGP and EI
I have a case with a customer that I am installing a PIX and a border
router for, He want´s to have controle over the border router, but the
Service Provider, is providing their router as the CPE. one interface
on the Service Providers router has an ip address from the customers public
ip address r
stration v 1.3. As per the documentation I
did the troubleshooting to find out what is the problem,
but not able to get a breakthrough.
On the call manager I checked the event viewer and provides
follwoing error message.
2/4/20031:15:03 PM Cisco CTIManagerError None3
The thing is the the router external to the pix, does not have a route for
the 157.157.0.0 network, considering that, whill this ever work ???
Although the address is a public IP address, this company uses it as an
internal address, and It sould not be visible on the internet, also the
server with
Ok,
But I am not quite sure I understand this, beacuse in this example the
address is used as an privat address on the company´s internal network, and
is not routed to the pix on the outside interface from hosts on the network,
so If this is to bypass NAT, by what IP address do the hosts on the ou
Hi
Can anyone please tell me what the point of the following command is
static (inside,outside) 157.157.146.13 157.157.146.13 netmask
255.255.255.255 0 0
Same IP address on the inside and the outside, I have seen this used on
production networks, but can not figure out why, can anyone please exp
just cant get this to work. and
cant find any config examples on the cisco website, atleast none that I can
use and work.
any hint would be welcome.
best regards,
Arni V.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=60611&
Can some one tell me, what AP is focused on in the Wireless LAN for Field
Engineers exam (WLANFE 9E0-581)
Is it the 350,1100 or 1200, or just all of them
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59278&t=59278
--
FAQ, list ar
Hi all, and sorry for the OT question, but you are the most profesional goup
of network pepole i know about.
My company is thinking about buying a network sniffer package,
basicly what we need, is a network sniffer, but thene some extras would be
nice, like some kind of WAN module, to sniff frame
I have sees this exact problem with a lot of the pix 501 boxes, and would be
intrested to know if cisco is going to do anything about it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58975&t=58946
--
FAQ, list archives, and subs
Can I use a cisco AS2511 Router as a terminal server to remotely connect to
my router lab, i.e. connect cables from the async ports on the as2511 to the
console ports on all the other routers ?
I know ít´s possable with the 2511 and 2509, but need to know if the "AS"
type is any diffrent.
Best re
If I have a pix seperating my network from the internet with an inside and
an outside interface, then I have some servers on the inside network that I
use Static to give an ip address on the outside network for host´s on the
internet to access. that´s the easy part, now the question
Is it possible
Well passed BCRAN tody, It was an ok test, not to hard, the only thing that
gave me any problems was, a lot of Modem / Access Server type question, as
that is somthing I have no hands on experience with.
Well onto to Routing next, then support.
Message Posted at:
http://www.groupstudy.com/form
Hi
Anyone have any i info on the new cisco 837 router ?
they say it has hardware acelerated 3DES encryption
that would be great, but I would like to know if anyone has
seen any 3des throughput figures for the router.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58275&t=58275
The Cisco PIX Firewalls by Richard A. Deal
I am reading it, and would recomed it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=58253&t=58250
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
can any one give me an idea about the 3des throughput of the 3002 VPN
Hardware Client ?
have looked all over cisco´s site, but can not find anything
Best regards,
Arni
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57830&t=57830
I just realizied who you are, and that I am reading your book "Cisco PIX
Firewalls" :)
it´s a small networking world.
I think it´s a great book, and has give me a lot of information about
working with the cisco PIX.
Thanx again.
p.s. and if anyone knows of a link to www.cisco.com, that I can se
I now this is somewhat off topic but, I am confident you can give me some
valid input about this,
My company is thinking about buying NetIQ´s Chariot software, any one here
have any good or bad experince with that product, and Is it as helpfull as
it seem for troubleshooting network problems.
Thanx for the info, can you or anyone point me to a page at cisco.com that
has info about the performance off these routers, I feel better if I can
point the customer at some official cisco information about the performance
of his router
Message Posted at:
http://www.groupstudy.com/form/read.php?
Hi
I have a VPN 3005 Concentrator, that establishes an Ipsec 3des tunnel to a
828 router, the router has uppgraded memory and 3des sofware.
the router is connectd to my via a 2mbits line, and workes fine, but when I
establish the vpn tunnel the performance drops down to something line
256Kbits, a
I have a simple question, can the Catalyst 2950 switch with a EMI Software
Image Route i.e. does it become a L3 swithc when the EMI images is loaded,
like the 3550 can with the EMI Image.
Best regards,
Arni
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57499&t=57499
-
has any one hear taken the CSVPN 9E0-121
I am thinking about taking that exam, I have some experience with the 3005
Concentrator, but none with the 3002 Hardware Clients, so I would like some
information about aproxemently how large a part of the exam the 3002 is, can
I get a way with haveing neve
Yes you can do this with the Reverse Route Injection, I have used it, it´s
easy to setup.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57186&t=44276
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/c
I Have the folowing setup
VPN-Client--VPN-Concentrator---ipsec-tunnel---PIX
Connections from the networks on the inside of the pix to the concentrator
private network workes fine
connections from the VPN Client to the concentrator private network worke
fine.
But I cant connect from the Insi
I have been trying to get an answer to this question with out luck,
the question is, If I am running an ISP and a company has a connection to
me, now someone from that company wants to use a vpn connection from the
internet to connect to his company through me, and I have a PIX to accept
his VPN
I need to get some insights into designing and installing a IP Phone
network, with CISCO switches and routers, but IP phones from another vendor,
and I am looking for some courses that can help me desing and implement the
QOS features, I was thinking about the DQOS course,
any thoughts or suggest
It would be great if anyone could give me some insights into if it´s posible
to use the 2610 or a PIX to do what I was talking about
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54878&t=54702
--
FAQ, list archives, and subscript
Ok,thanx for the info,
would it be possible any other way, as I already have a PIX506 and a 2610
router
or is the VPN 3005 the only and best way to go
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54704&t=54702
--
FAQ, list ar
I have a question regarding VPN setup,
I have some clients connect to me with 828 G.Shdsl routers, most
of the also have PIX 501 and can tunnel between them selfs
then I have a 2610 Router that routes the internet traffic from the
clients to the internet, Now they want to be able to VPN in from
Ok I have tested this and got it to work with out the dual usernames on
bouth router, as I was talking about in the previous post
but that still leves my orginal question, and if any one can see anything
from the debug, that would be great.
Message Posted at:
http://www.groupstudy.com/form/re
Ok thanx for the explanation
to get this 100% I just have one more question
If I am calling an ISP
Router 1
has in its config
dialer 0
ppp authentication chap calli
ppp chap hostname bla
ppp chap password bla1
and that works to authenticate to the ISP router, but as chap is two way, do
I als
Do I have to have the hostname of each router in each other, if I am calling
an ISP I just get a username and password, that I send the ISP router, I
dont get any hostname or password to put in my router to authenticate the
ISP router
Or do I
Message Posted at:
http://www.groupstudy.com/fo
It´s my understanging that when I use ppp authentication chap callin
i dont have to have the username on my router, as if I was calling into an
ISP then the ISP´s route would have to have a username on my router, and I
dont think that is the that is used.
Message Posted at:
http://www.groupstu
Well I have some more chap authentication issues, and if someone can give me
any pointers that would be great,
I have two routers
a 1003 who is calling an 3660 over ISDN
this is the debug from the 100300:03:54: %LINK-3-UPDOWN: Interface BRI0:1,
changed state to up
00:03:55: %DIALER-6-BIND: Inter
The thing is that is I am calling an ISP so I have no control over the
router I am calling into, I cant use that routers hostname as a username as
I have an account there with a username that I have to use, and the problem
seems to be sending that username to the ISP router..
Message Posted at:
I have already tried using ppp authentication chap callin, and that does not
change anything
yes the IP unnumberd is just there for testing, as this router I am using
can not do IP address negoitedted, and NAT
but the production router will be able to.
Could that be the issue, from the debug, i
no cdp enable
ppp authentication chap
ppp chap hostname li5h31
ppp chap password 7 045358571B3259
any thoughts ???
best regards,
Arni V.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54047&t=54047
--
FAQ, list archi
I have a cisco1003 isdn router dialing into another router, in an outher
country, and it has worked perfectly, but now my telco switched the voice
and isdn calls from the fiber to a sattalite, and the the router can not
connect, are thare any timeout settings our somthing like that I can change..
I have the following problem,
I have two locations connected bya ATM from a service provide, and I get
ethernet at each end, now I would like to send Vlan tagged frames 802.1q
over the link, as I need to have two IP networks span both sites.
But when I turn tagging on, It does not work, and the
I did this when we uppgrade the flash memory of the pix classic at work,
just took the old flash card and put it in an old Pentium 133 motherbord,
and some Intel NIC´s works like a charm
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48215&t=48210
--
I have two locations one with 20 servers and 150 users, and the other close
by with 150 users, they are connect with a 100Mbits fiber connection, I am
using sperate C-class networks for these locations, but now I need to change
the IP network to eighter another C-class network or a B-class network
to
change the IP networks uesd for those net´s so I was thinking if I should
change them both to one B IP network, and eliminate the routing between
those networks.
anyone have any insights on that
Best Regards,
Arni V.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=434
Guys,
This week, I am attending the CIPT 3.1 course and I intend to take the exam
in the next two weeks or so.
Boson has three practise test available (#1, #2, #3).
Has anybody used any of the above test from Boson, if so, which one is
recommended.
Besides, does anyone know of any other exam p
1 - 100 of 146 matches
Mail list logo