Please ignore my last question concerning uploading/downloading pix image
via tftp.
I should hit my self over the head for asking for such 'intel'.
Thank you.
>Now, all the code acquisition process aside, if you are running an older
>version of PIX OS, then you have to tftp the PIX OS to a tft
Hi,
Unfortunately my version is 6.1.
>Now, all the code acquisition process aside, if you are running an older
>version of PIX OS, then you have to tftp the PIX OS to a tftp or http
>server, and then pull it back from the tftp/http server while in ROMMON
>mode. This basically is like you're insta
h 3DES License installed.
HTH's,
Mark
-Original Message-
From: Paul Van Neiberman [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 20, 2002 8:36 AM
To: [EMAIL PROTECTED]
Subject: RE: PIX and the Activation Key [7:59610]
Hi,
Thanks to everyone who provided some 'intel',
h
Hi,
Thanks to everyone who provided some 'intel',
however after doing a #show version I do get the serial number
and a Activation-Key displaying 4 sets of hexadecimal numbers, what is this
key used for?( its version 6.1(4))
Also the registration site at CCO
https://www.cisco.co
Thanks for the tip!
-Mark
-Original Message-
From: eric nguyen [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 19, 2002 8:26 PM
To: Mark W. Odette II; [EMAIL PROTECTED]
Subject: RE: PIX and the Activation Key [7:59574]
"activation-key" commands only works with versio
"activation-key" commands only works with version 6.2.x or higher
"Mark W. Odette II" wrote:Depending on the version of PIX code the unit is
running, you might not
have to do too much.
First, go to your PIX, and issue the 'Show Version' command. If you are
running
Depending on the version of PIX code the unit is running, you might not
have to do too much.
First, go to your PIX, and issue the 'Show Version' command. If you are
running 6.1 or higher (I believe), you can go into config mode and issue
the 'activation-key' command follo
licence key.
Ok, my question is, what am I supposed to do with this serial number provided
on a (official-looking) document that accompanied the pix?
I thought the pix would prompt me for an activation key after booting the
flash, as explained in this url,
http://www.cisco.com/en/US/products/hw
ary 26, 2002 9:02 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: How to get the activation key for my clone Pix?
>
>
> Hi Everyone,
> After struggling for the past two days, I have
> successfully cloned a Pix firewall by using my PC.
> I plug the 16MB flash card
To me they are the same thing.
>From: "Scott Morris"
>Reply-To:
>To: "'Wes Stevens'"
>CC:
>Subject: RE: How to get the activation key for my clone Pix [7:36638]
>Date: Wed, 27 Feb 2002 10:37:47 -0500
>
>If it's any consolation, yes. A
, February 27, 2002 10:25 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix [7:36638]
Scott,
Have you purchased a smartnet contract for your 520's and other routers? By
the book the software is not tranferable and your pix's and
ssage-
From: Wes Stevens [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 27, 2002 10:48 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix [7:36638]
Scott,
I am not trying to have this "degrade into personal territory ", tru
>To: "Wes Stevens"
>Subject: RE: How to get the activation key for my clone Pix?
>Date: Wed, 27 Feb 2002 07:56:10 -0700
>
>Actually if you buy a router on E-bay you don't own the software and it is
>illegal.
>
>
>Software Transfer and Licensing
>Overview
>
-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 27, 2002 10:29 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix [7:36638]
setting up vpn's is nothign like having a dmz... Having multiport
firewalls allows
Cisco
used device it is the responsibility of the buyer to make the software that
will be used on the device legal.
>From: "Scott Morris"
>Reply-To:
>To: "'Wes Stevens'"
>CC:
>Subject: RE: How to get the activation key for my clone Pix [7:36638]
&
or the other.
-Original Message-
From: Wes Stevens [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 27, 2002 8:56 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix?
In my own lab a I have a 506. I would like to have another p
quot;Scott Morris"
>To: [EMAIL PROTECTED]
>Subject: RE: How to get the activation key for my clone Pix [7:36638]
>Date: Wed, 27 Feb 2002 09:58:30 -0500
>
>Personally? I have two 520's that I got a sweet deal on (EBay).
>
>But other than that, what is the functional di
EMAIL PROTECTED]]
Sent: Wednesday, February 27, 2002 8:56 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix?
In my own lab a I have a 506. I would like to have another pix with a dmz
interface. I am sure pretty sure they will cover pix to pix
, frame -
ten routers and three switches. Another $2k to $3k for a pix with three
interfaces is beyond my reach.
So how do you practice pix to pix and dmz?
>From: "Scott Morris"
>Reply-To:
>To: "'Wes Stevens'"
>Subject: RE: How to get the activation key fo
Just for the record.. I picked up a 501 NEW in the box for $401.00 US and no
shipping. Just sales tax. This was not 3DES.. just plain of DES and 10
users. Works like a top.. Place is in FL but apparently they use IngramMicro
as the fulfillment center(still had the lable)
The new 506E pricing just
y-To:
>To: "'Wes Stevens'"
>Subject: RE: How to get the activation key for my clone Pix?
>Date: Wed, 27 Feb 2002 07:26:33 -0500
>
>I believe that would be a "use other than intended"
>
>Cisco is a little lax in enforcing software licen
oint!
Scott
-Original Message-
From: Wes Stevens [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 27, 2002 7:53 AM
To: [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix?
Scott,
"use other then intended"
Maybe, but they sell the board with the cod
Jones
> Sent: Tuesday, February 26, 2002 1:02 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: How to get the activation key for my clone Pix?
>
> Hi Everyone,
> After struggling for the past two days, I have
> successfully cloned a Pix firewall by using my PC.
> I p
They will sell anything on eBay So who was the clown ? Anybody we know
in this forum. ??
""Scott Morris"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Oh, and fourth, check around EBay, there is one idiot who has cloned the
PIX
> and decided to put it on EBay. So ther
L PROTECTED]; [EMAIL PROTECTED]
Subject: RE: How to get the activation key for my clone Pix?
Nice purchase on the flash card, btw
However, this is not a wise move. Bad karma to do this installation
anyway...
Worse karma to ask for help on a public list with numerous Cisco people
on it! (grin)
An
AIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Roger Sohn
Sent: Tuesday, February 26, 2002 8:12 PM
To: '[EMAIL PROTECTED] '; '[EMAIL PROTECTED] '
Subject: RE: How to get the activation key for my clone Pix?
Now, nowlet's not threaten each other. I'm
]
Sent: 2/26/2002 4:58 PM
Subject: RE: How to get the activation key for my clone Pix?
You should take the 400 you spent and buy a 501. I promise it will be
less
than your legal fees if Cisco were to get involved.
Jason Sullivan
Systems Engineer
[EMAIL PROTECTED]
Office (801)270
Sent: Tuesday, February 26, 2002 1:02 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: How to get the activation key for my clone Pix?
Hi Everyone,
After struggling for the past two days, I have
successfully cloned a Pix firewall by using my PC.
I plug the 16MB flash card into the PC's ISA
tion keys and serial
numbers. Not even close to the confusion of trying to upgrade catalyst
supervisor engines from 2 to 5 and having to go one step at a time. Ah, if
all things were easy like 2500 images :)
Subject: RE: How to get the activation key for my clone Pix?
> You got a good
riginal Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Athony Jones
Sent: Tuesday, February 26, 2002 1:02 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: How to get the activation key for my clone Pix?
Hi Everyone,
After struggling for the past two days, I have
succ
You got a good price on the flash card
However, this is not a wise move. Bad karma to do this installation
anyway...
Worse karma to ask for help on a public list with numerous Cisco people on
it! (grin)
Anyway, the activation key is tied to the serial number, which of course is
on the
The activation key is tied into the serial number of the PIX (I assume the
serial # is somehow related to the flash card) so using the key from one PIX
will not work in another. I had to RMA a PIX 515 a few months ago and
needed to send Cisco the new serial number and they sent me the new
get the activation key for my clone Pix?
Hi Everyone,
After struggling for the past two days, I have
successfully cloned a Pix firewall by using my PC.
I plug the 16MB flash card into the PC's ISA slot
and the PC recognize that it is a Pix flash card
(cost me $400.00). It boots up fin
wever, after the boot up
sequence, it asks me for the activation key. I've
been trying many different possible scenarios without
much success. I even tried to use the activation key
from another Pix firewall but that doesn't work
either.
Anybody know how I can fake my clone Pix with a
Dion,
On the PIX 515 that we have, the activation key is listed directly under
the serial number of the "sh ver" (the very last line). Perhaps you are
running really old PIX code???
In the past I have successfully obtained the correct serial number by
applying for the IPSec upgrade l
Thanks everyone for the replies.
I upgraded it without any problems, and a new activation key was generated
automatically.
I just thought it was strange that it didn't have a key straight out of the
box.
> -Original Message-
> From: Gaz [SMTP:[EMAIL PROTECTED]]
>
If you're not changing the features, then you won't need to put a new
activation key in.
If you are changing the features then you will have a new activation key, so
you don't need the existing one.
I used to cut and paste the activation key all the time "just in case"
Well, I've seen an "R" version and a "U" version but never a "UR" version.
I have always been under the assumption that they were mutually exclusive.
As for the lack of an activation key, that is odd. What is the current
version of the OS? Have you tried to ru
rsion 6.1.0.101, Install version 5.3.2
Installing to flash
Serial Number: #
Activation Key: 4
Do you want to enter a new activation key? [n]
#Select no for this PIX
- Original Message -
From: ""Radford Dion""
Newsgrou
I've just got a hold of a PIX 515UR and I want to upgrade to the lastest
software, but when I do a show ver there is no activation key.
Is this normal, or do I have to obtain one from somewhere?
Dion Radford
Mellon Site Services - Europe
71 Queen Victoria Street, London, EC4V 4DR
+44 (
when you upgrade the pixos, you'll get a chance to enter a new act. key or
keep the old one.
""Jacques Allison"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> On PIX ver 4.1(7) I can use the "show actkey" to display the connection
> license key, but the command is n
down your activation key.
The following topics are discussed in this section:
Boothelper Installation
Downloading a Software Image over TFTP
Using TFTP Commands
TFTP Download Error Codes
Upgrading the
u need to put your serial no
and u ll get a new key
u need cco login
-Original Message-
From: Jacques Allison [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 21, 2001 5:24 PM
To: [EMAIL PROTECTED]
Subject: PIX activation key on 4.1(6) [7:13187]
Hi all,
On PIX ver 4.1(7) I can use the
Hi all,
On PIX ver 4.1(7) I can use the "show actkey" to display the connection
license key, but the command is not on the ver 4.1.(6). How do I upgrade the
PIX is I lost the original disk and license? I look on CCO and can't find
any answers.
Regards,
Jacques Allison
Senior Network Engineer
uot;Dietmar Prantner"" <[EMAIL PROTECTED]> wrote in message
000c01c0860f$b75fe380$[EMAIL PROTECTED]">news:000c01c0860f$b75fe380$[EMAIL PROTECTED]...
> Hi there,
>
> I've got a Pix 506 to play with and wanted to configure some
> IPSEC-Settings... The PIX tol
Dietmar,
Hi! I havent had much experience with the 506 model, but with the 520 model
in order to use a different/another activation key, you will need to upgrade
or re-install the Pix IOS. If you are still need help, please e-mail me
off-line.
thanks
-Brad Ellis
CCIE#5796
[EMAIL PROTECTED
Hi there,
I've got a Pix 506 to play with and wanted to configure some
IPSEC-Settings... The PIX told me that it needs an activation key...
I ordered the key through the web-form and when I received it I wanted to
activate it...
As the Pix was already in use without activation key I wa
Hi,
Just login first.
http://www.cisco.com/kobayashi/sw-center/internet/pix-56bit-license-request.
shtm
GIL
CCNA/CCDA
-Original Message-
From: Parris, Brian [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 29, 2000 8:29 PM
To: '[EMAIL PROTECTED]'
Subject: Activation
Call them up @ 1 (800) 553-2447.
"Parris, Brian" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can somebody tell me how to get an activation key for VPN-Des so I can set
> up my PIX with VPN. I tried [EMAIL PROTECTED]
> <
Try Cisco TAC at 1 800 553 2447.
Vern Stitt
ASE, CCA, CCNA, MCSE
""Parris, Brian"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Can somebody tell me how to get an activation key for VPN-Des so I can set
up my PIX with VPN.
Can somebody tell me how to get an activation key for VPN-Des so I can set
up my PIX with VPN. I tried [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> but that was 2 days ago and still haven't
gotten a reply.
Thanks,
Brian
___
UPDATED Posting Guide
51 matches
Mail list logo