I have a Cat 6509 with the MSFC card in it. How do you get to the router
mode of the switch?
Thanks
Wm. Spencer Plantier
LAN Engineer
(919) 474-1300 ext 0873 Office
(919) 474-1056 Fax
(919)696-8848 Cell
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription
I am in the router mode of the switch and I only see the OBC interface and
the IBC interface. I have two GBIC ports on the supervisor module. How do I
get the router mode to see those ports.
Thanks
Wm. Spencer Plantier
LAN Engineer
(919) 474-1300 ext 0873 Office
(919) 474-1056 Fax
(919)696-8848
information or opinion has been confirmed in
writing by an authorised WESTCON director.
-Original Message-
From: Plantier, William [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, December 06, 2000 4:53 PM
To: '[EMAIL PROTECTED]'
Subject:
session 15
> -Original Message-
> From: Plantier, William [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 06, 2000 8:53 AM
> To: '[EMAIL PROTECTED]'
> Subject: Cat 6509
>
>
> I have a Cat 6509 with the MSFC card in it. How do you get to
Think that you have to map the ports to Vlans in the Sup and then route the
vlans on the MSFC.
> -Original Message-
> From: Plantier, William [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 06, 2000 10:25 AM
> To: '[EMAIL PROTECTED]'
> Subject: Cat 6509
&
log into the switching os
do - 'session 15'
>
>I have a Cat 6509 with the MSFC card in it. How do you get to the router
>mode of the switch?
>
>
>Thanks
>
>Wm. Spencer Plantier
>LAN Engineer
>(919) 474-1300 ext 0873 Office
>(919) 474-105
First, session into the msfc and set up the virtual interface/vlan:
session 15
!
interface Vlan10
description Backbone VLAN1
ip address 10.1.1.1 255.255.255.0
!
Then, exit back out to the switch mode and set the port to the vlan:
set vlan 10 1/1
Once you have a physical connection on the
Message -
From: "Plantier, William" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 06, 2000 4:52 PM
Subject: Cat 6509
> I have a Cat 6509 with the MSFC card in it. How do you get to the router
> mode of the switch?
>
>
> Thanks
&g
AM
To: Plantier, William; [EMAIL PROTECTED]
Subject:Re: Cat 6509
For all of those questions the answer is on the www.cisco.com
Even if you do not have an account there you can do a search for all
of this
types
of questions !
ED]
E-Mail CCIE Boot Camp [EMAIL PROTECTED]
WEB CCIE Boot Camp www.ccbootcamp.com (Check us out for CCIE lab exam
preparation)
""Plantier, William"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a Cat 6509 with
information or opinion has been confirmed in
writing by an authorised WESTCON director.
-Original Message-
From: Sam [SMTP:[EMAIL PROTECTED]]
Sent: Thursday, December 07, 2000 4:15 PM
To: [EMAIL PROTECTED]
Cc: Olden Pieterse
S
;Regards
>
>Elias Aggelidis
>
>CCNP + Voice
>- Original Message -
>From: "Plantier, William" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Wednesday, December 06, 2000 4:52 PM
>Subject: Cat 6509
>
>
> > I have
Hi,
On the config of a 6509 I have inherited I have a command I don't understand
nor ca find any info on ! Can anyone explain what :
#frame distribution method
set port channel all distribution ip both
means ???
many thanks
Chris
***
Hi guys
I encountered a bizarre situation whereby the Cat 6509
is automatically reloaded after I rebooted my IBM
Thinkpad. The connection is via Thinkpad serial port
to the switch's console. At that moment, there is no
hyperterm session and the notebook is running NT4
workstation. Anyon
I have a problem with a Cat. 6509. We are running Ethernet ports are set to:
speed: Auto, Duplex: Auto. Users NICs are set (speed/duplex) to auto. A user
had reset his NIC, when out of the office to 100/Full. When he connected to our
network, the port he was connect to locked(port light was
In my current environment we have just installed a 6509 with dual supervisor
modules. It is currently running a "hybrid" IOS (12.0(7)XE) which allows
the switch engine and the route processor to be configured, as separate
entities. With this IOS the configuration of the two modules does not sync
I was trouble shooting and issue with a Sun server and
have found an interesting issue. The admin called and
said they were having a problem getting to certain
network. In my search to find his issue, which turned
out to be his, ;) I found that his Sun box has a Quad
card installed and that he h
What's up! I've got a 6509 with a VLAN int that has a crossover going to our
old Cabletron MMAC. (we're in the process of upgrading and have most of the
network still on the MMAC side of the house).. here's my dilemma...
Every once in awhile I get the following error:
Native vlan mismatch detecte
"Hinds, Christopher" wrote:
>
> Hi,
>
> On the config of a 6509 I have inherited I have a command I don't understand
> nor ca find any info on ! Can anyone explain what :
>
> #frame distribution method
> set port channel all distribution ip both
>
http://www.cisco.com/univercd/cc/td/doc/produ
ble during laptop
reboots, and don't connect it to the switch until after HyperTerminal is
happily running.
-Original Message-
From: Sgp YH [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 20, 2001 4:14 AM
To: [EMAIL PROTECTED]
Subject: Cat 6509 auto reload
Hi guys
I encountered a bi
PROTECTED]
Subject: RE: Cat 6509 auto reload
I've seen this with other Cisco switches and Dell laptops. Basically, the
laptop is sending out weird signals out the serial port during the reboot.
These weird voltages somehow screw up the catalyst, and cause it to reboot.
The only solution
<[EMAIL PROTECTED]@idt.net> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a problem with a Cat. 6509. We are running Ethernet ports are set
to:
> speed: Auto, Duplex: Auto. User's NICs are set (speed/duplex) to auto. A
user
> had reset his NI
Steve,
Here is the link to the release notes for IOS 12.1(2)E that details how to
convert a 6509 from hybrid mode to native mode (may require CCO login):
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/ios121e/78_11047
.htm#xtocid2003532
This is a 26 step process, and some of the st
il) <[EMAIL PROTECTED]>
Sent: Friday, July 21, 2000 7:45 AM
Subject: Cat 6509 IOS change
> In my current environment we have just installed a 6509 with dual
supervisor
> modules. It is currently running a "hybrid" IOS (12.0(7)XE) which allows
> the switch engine and the
Does this VLAN's see each other (Trunking or router)?
If that is so, you have a problem, because switch remebers the MAC addresses
and
MAC addresses on the LAN (nomatter that NIC are on different subnet) MUST be
unique.
Aleksander
"William Swedberg" <[EMAIL PROTECTED]> wrote in message
[EMAIL PR
Title: RE: Cat 6509 and Suns
Ok I'm going to show my ignorance here, but in my studying, I remember reading that in some cases you have to assign each interface a unique MAC address, as seems to be the case below. However I also thought MAC addresses were permanently assigned address for
Hi all,
Does anyone know whether the Cat6509 running CatOS on the Supervisor2 and
IOS on the MSFC2 will support MPLS? I am attempting to download an IOS
software image for the MSFC2 and MPLS is not listed in the Software Advisor
as one of the features on the CAT6000/MSFC2. I'm not sure how reliab
Seems like you have a user on that MMAC that is trying to set up trunking on
his workstation.
- Original Message -
From: "Jeff Duchin" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Thursday, February 01, 2001 3:14 PM
Subject: Cat 6
Hi all,
I have a Cat6509 here in my lab, and had been playing with the QoS for a
while - not really in depth though. I would like to apply per port type of
QoS whereby the ingress and egress traffic on that port will comply to the
QoS specified. I had tried posting a similar question to the Ci
""evt"" wrote in message ...
> Does anyone know whether the Cat6509 running CatOS on the
> Supervisor2 and IOS on the MSFC2 will support MPLS?
SupIOS only. Martini-draft L2 EoMPLS as well as regular IP/MPLS
and IP+ATM. You'll eventually want to get on the 12.2S train, try
getting that code in la
Hi ALL,
After the upgrade of CAT OS and MSFC2 IOS to :c6msfc2-jsv-mz.121-5c.E8
I am getting TRACEBACK ERROR on MSFC2 card.
Has anyone encounter this error and what is the fix for this traceback
error.(Acording to CISCO this error is being going on from early IOS).
Thank you, for your help.
Mik
Dear Group
I am having one 6509 switch with 2 sup module cards (one in redudent mode).
All of a sudden from past couple of days i am observing that my SUP 1 modules
status LED is not glowing. Same time my sup2 modules management LED is
glowing
RED. But still my switch is working fine.
When I giv
Hello There,
This is a bit boring question, I must admit, but try
to read through ...
I have a requirement to connect over the weekend, a
Cat 6509 to 2 'core' switches cat 5000.
This is the 1st 6509 that will be in the network, and
the switches acting as core are 'a bit old'
I am looking for some snmp OIDs or MIBs that I can incorporate into my
network management that will give me specific port counters - errors,
overall throughput per port and things like that. I have tried Cisco's site
but cannot seem to find them. Any ideas? Thanks.
Jeff
_
Folks,
I have two Cat 6509's with two Supervisor-1A-2GE, MSFC, and PFC cards. I
just want to know if the two Gigabit Ethernet ports on each Supervisor work
independently of which Supervisor is active.
1. I mean will the two Gigabit Ethernet ports on the Standby Supervisor also
wor
general pratice, downgrade the IOS.
Waiting for Cisco release new IOS.
""Mike Peterson"" <[EMAIL PROTECTED]> ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Hi ALL,
>
> After the upgrade of CAT OS and MSFC2 IOS to :c6msfc2-jsv-mz.121-5c.E8
> I am getting TRACEBACK ERROR on MSFC2 card
hi
You can try taking out the modules and putting them back i have seen that
this do the job most of the timedo this and see if it works ...
Regards
Arun Sharma
""Infotech"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear Group
>
> I am having one 6509 switch with 2 sup
In mail.net.groupstudy.pro, you wrote:
> I am looking for some snmp OIDs or MIBs that I can incorporate into my
> network management that will give me specific port counters - errors,
> overall throughput per port and things like that. I have tried Cisco's
site
> but cannot seem to find the
In mail.net.groupstudy.pro, you wrote:
> In mail.net.groupstudy.pro, you wrote:
> You'll find what's supported at .
> Walk around in ../oid and ../v2 to get a look at the schemas and the oids.
Uh, guess the URL got lost somewhere after sending the mail. ;-) Try
ftp.cisco.com, the path is /pub/m
, 2003 7:48 AM
Subject: Cat 6509 Scenario - Comments please [7:66211]
Folks,
I have two Cat 6509's with two Supervisor-1A-2GE, MSFC, and PFC cards. I
just want to know if the two Gigabit Ethernet ports on each Supervisor work
independently of which Supervisor is active.
1. I mean
Aziz Islam wrote:
> Folks,
> I have two Cat 6509's with two Supervisor-1A-2GE, MSFC, and PFC cards. I
> just want to know if the two Gigabit Ethernet ports on each Supervisor work
> independently of which Supervisor is active.
Yes the uplinks on the inactive sup are function
PROTECTED]
Subject: Cat 6509 Scenario - Comments please [7:66211]
Folks,
I have two Cat 6509's with two Supervisor-1A-2GE, MSFC, and PFC cards. I
just want to know if the two Gigabit Ethernet ports on each Supervisor work
independently of which Supervisor is active.
1. I mean will the two Gi
Aziz
How do you want to use them? As a layer 3 interface or redundant l 2 channel
or trunk?
Martijn
>-- Oorspronkelijk bericht --
>Date: Fri, 28 Mar 2003 15:48:35 GMT
>From: "Aziz Islam"
>To: [EMAIL PROTECTED]
>Subject: Cat 6509 Scenario - Comments please [7:6621
Thanks for replying. I have already tried this many times. But the status
remains the same. Let me tell you more in details:
on sup1 mod only status LED is not glowing where all 3 LED's are gree.
on sup2(redudent) mod status LED is Orange , system LED is green , 3rd LED is
not glowing and 4ht is
Hi,
Does anyone know how to get a us robotics modem to work with a Sup card on a
catalyst 6509? It only has a console port and no aux port. I saw some kind
of adapter that you might need
Any idea appreciated...
I think I may have brought network down when hooking modem into the console
and
.
> -Original Message-
> From: Jeff Duchin [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, February 01, 2001 2:14 PM
> To: [EMAIL PROTECTED]
> Subject: Cat 6509 and Cabletron MMAC
>
>
> What's up! I've got a 6509 with a VLAN int that has a
> crossover going to ou
Hi All :
I 've don't the cisco note about the MSM install/config.
But, some concept don't know ?
1 ) what is g/0/0/0 -g4/0/0/0 address ? between sub interface
g/0/0/0 is vlan1 or add vlan in sub interface .
2) how to assign the ip address in each interface ant sub interface port
channel 1.x
Hi All :
I 've don't the cisco note about the MSM install/config.
But, some consep don't know ?
1 ) what is g/0/0/0 -g4/0/0/0
2) how to assign the ip address in each interface ant sub interface port
channel 1.x
3) how to do the vlan routing between in vlan 1 to vlan 4.
4 )any exiting for me r
This may be more info than you want, but here is some info I've put togther
that I plan on using in one of our training classes.
Cisco 6500 Series MSFC Native IOS Layer 3 Switching
This concept blends switching and routing into one platform. The Native IOS
mode on this platform allows the s
49 matches
Mail list logo
