I have a router with 4 serial int. I want to configure it to act as a
frame-relay switch. I how can I accomplish this?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70338t=70338
--
FAQ, list archives, and subscription
Try this link at FatKid:
http://www.fatkid.com/html/frame_relay_switch.html
Jamie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Manny
Sent: Sunday, June 08, 2003 8:21 AM
To: [EMAIL PROTECTED]
Subject: Frame Switch [7:70338]
I have a router with 4
To: [EMAIL PROTECTED]
Subject: Frame Switch [7:70338]
I have a router with 4 serial int. I want to configure it to act as a
frame-relay switch. I how can I accomplish this?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=70345t=70338
a 4 port serial card works great...
Symon Thurlow wrote:
What about a 4000/4500 with 2x NP4T? They are reasonably priced.
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: 27 November 2002 18:25
To: [EMAIL PROTECTED]
Subject: Home lab setup FRAME SWITCH [7:58204
: Re: Home lab setup FRAME SWITCH [7:58204]
Yes, your correct...
The ones I have at home are 4500 routers with 4700 cpu's...
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-BOOT-M), Version 11.1(22), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc
Are you sure about this I can't find anything on CCO where these modules
are not supported on the 4000 I also know someone right now who has 2 of
the NP 4T modules in a 4000M and using it as a frame switch for his lab.
-Original Message-
From: J.D. Chaiken [mailto:[EMAIL PROTECTED]]
Sent
000/4500 with 2x NP4T? They are reasonably priced.
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: 27 November 2002 18:25
To: [EMAIL PROTECTED]
Subject: Home lab setup FRAME SWITCH [7:58204]
Here is my lab setup there is one thing I think I am in desper
Here is my lab setup there is one thing I think I am in desperate need
of and that is a frame switch I do not need the 3550 we are deploying
them at work and have access to them and also 5500's with the
lightstream equipment. After getting this lab together of course I have
spent some bucks as you
Elijah, you got the switch from me... How is it working??? I was wondering
if you were going to use it for Cisco cert needs..
Have you seen my online lab rental yet? I can send you some information.
I have an AGS + if you are interested. It has 14 serial interfaces, 4
Token-Ring and 2 Ethernet
offline about the ags+
-Original Message-
From: jeff sicuranza [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 27, 2002 2:07 PM
To: [EMAIL PROTECTED]
Subject: RE: Home lab setup FRAME SWITCH [7:58204]
Elijah, you got the switch from me... How is it working??? I was
wondering if you
What about a 4000/4500 with 2x NP4T? They are reasonably priced.
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: 27 November 2002 18:25
To: [EMAIL PROTECTED]
Subject: Home lab setup FRAME SWITCH [7:58204]
Here is my lab setup there is one thing I think I am
Elijah,
I use a 2521 as a frame switch in my home lab and that is enough for me.
Keep in mind that it only has four serial interfaces, so if you want to do
more frame connections, you will need the 2522 or 2523 which have ten serial
interfaces. You have more routers in your lab than I do. I only
SWITCH [7:58204]
Here is my lab setup there is one thing I think I am in desperate need
of and that is a frame switch I do not need the 3550 we are deploying
them at work and have access to them and also 5500's with the
lightstream equipment. After getting this lab together of course I have
spent
Im setting up a Cisco lab at home, I've decided to use a 2610 as a
frame-relay switch, my question is should
I use the router as layer 2 device exclusively or should I use it as Layer 3
and 2 device?
The reason why I asked is I got two routers to talk to each other through
the 2610 using it
If you have the interfaces available, definitely use it for
both. There's no reason not to, and it allows you to have an
additional layer 3 device in your scenarios.
John
Get your own 800 number
Voicemail, fax, email, and a lot more
Hey guys,
I am setting up a lab with:-
HeadQ= DLCI 101
router A = DLCI 102
router B = DLCI 103
router C = DLCI 104
The switch interfaces are s0, s1, s2, and s3. My configuration for the
switch is as follows:-
Frame-Switch#
frame-relay switching
int S0
no ip address
encapsulation frame
Hi Chris,
What I am about to do is to add a T-1 wic to the 1600 and see if I can make
a frame switch and connect it to another 1602 and a 2610. The config that I
used if from the TAC website(- my own ip's) and it is only b/w the 2 1602
routers, which is different than configuring it on a 2501
the other gentleman who needed to know this.
From: Circusnuts
Reply-To: Circusnuts
To: [EMAIL PROTECTED]
Subject: Re: 1600's - Using to make a Frame Switch [7:4643]
Date: Wed, 16 May 2001 19:38:44 -0400
Might not be possible... I checked the CCO I don't see an Enterprise
model IOS (but I did
102
Phil
- Original Message -
From: Gary Hughes
Sent: Tuesday, May 15, 2001 11:52 PM
Subject: 1600's - Using to make a Frame Switch [7:4643]
Anybody know the config's to make a 4 port Frame-Switch from 2 1600's
(both
with 2 serial ports)
--
Someone approached me and asked me
with no luck.
I am wondering there should be a way because it DOES let me type the
frame-relay switching global config command?
Thanks,
Niraj
** Anyone out there that can help :-( **
From: Circusnuts
Reply-To: Circusnuts
To: [EMAIL PROTECTED]
Subject: Re: 1600's - Using to make a Frame Switch [7
Anybody know the config's to make a 4 port Frame-Switch from 2 1600's (both
with 2 serial ports)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4643t=4643
--
FAQ, list archives, and subscription info: http://www.groupstudy.com
-
From: Gary Hughes
To:
Sent: Tuesday, May 15, 2001 11:52 PM
Subject: 1600's - Using to make a Frame Switch [7:4643]
Anybody know the config's to make a 4 port Frame-Switch from 2 1600's
(both
with 2 serial ports)
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list
- Using to make a Frame Switch [7:4643]
Date: Tue, 15 May 2001 23:52:35 -0400
Anybody know the config's to make a 4 port Frame-Switch from 2 1600's (both
with 2 serial ports)
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Anyone have any problems with a 4500 retaining router configs using 11.2 or
12.0.7 IOS? I initially was trying to set up a simple frame relay switch
and entered 'frame-relay lmi-type ansi' which worked intially. However when
I run a 'sh conf' the commands are not there. I've even re-entered
Has anybody got an AGS+ that would work as a Frame Switch (CSC/4, at least 4
serial ports) that they would be willing to sell me?
I'm doing the Ebay thing, but not had any luck so far. If somebody has one
that they successfully used as a Frame Switch, and now they want to sell it,
drop me
PM
Subject: Re: Frame Switch
On Sat, 28 Oct 2000, Austin wrote:
I have a 2523 in my lab configured as a Frame Relay Switch.
All the serial ports are acting as DCE providing clocking to the
routers.
Initially, all clock rates were set to 64000 but I changed it to 100
..
for some reason
: Re: Frame Switch
On Sat, 28 Oct 2000, Austin wrote:
I have a 2523 in my lab configured as a Frame Relay Switch.
All the serial ports are acting as DCE providing clocking to the
routers.
Initially, all clock rates were set to 64000 but I changed it to 100
..
for some reason
* X.21
Does this help?
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Brian
Sent: Sunday, October 29, 2000 7:04 AM
To: whatshakin
Cc: [EMAIL PROTECTED]
Subject:Re: Frame Switch
On Sun, 29 Oct 2000, whatshakin wrote:
High
PROTECTED]] On Behalf Of
Brian
Sent: Sunday, October 29, 2000 7:04 AM
To: whatshakin
Cc: [EMAIL PROTECTED]
Subject: Re: Frame Switch
On Sun, 29 Oct 2000, whatshakin wrote:
High speed (synchronous) ports are good for 2.048mb/s and the low speed
(asynchronous) ports max out
I have a 2523 in my lab configured as a Frame Relay Switch.
All the serial ports are acting as DCE providing clocking to the routers.
Initially, all clock rates were set to 64000 but I changed it to 100 ...
for some reason, only serial0 and serial1 accepted the new clockrate speed f
100
On Sat, 28 Oct 2000, Austin wrote:
I have a 2523 in my lab configured as a Frame Relay Switch.
All the serial ports are acting as DCE providing clocking to the routers.
Initially, all clock rates were set to 64000 but I changed it to 100 ...
for some reason, only serial0 and serial1
Thanks Brian!
"Brian" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
On Sat, 28 Oct 2000, Austin wrote:
I have a 2523 in my lab configured as a Frame Relay Switch.
All the serial ports are acting as DCE providing clocking to the
routers.
Initially, all
Can the AGS+ run as a frame-switch? I mean does the IOS's that run on it
support frame relay switching? Would make a real nice cheap frame switch
if it did. If it does, then any caveats of using an AGS+ vs. say a 2520
etc?
Brian
---
Brian Feeny
The AGS is perfect for the Frame-Switch role. For the money you can't beat
it. If you ever get a chance to check out CCIE Bootcamps, they use this
router in their dial-in lab racks. 10.0 up support DLSW, Frame-Relay
Switching, X.25. This router is best used as the Telco cloud, in a lab
On Thu, 19 Oct 2000, Circusnuts wrote:
The AGS is perfect for the Frame-Switch role. For the money you can't beat
it. If you ever get a chance to check out CCIE Bootcamps, they use this
router in their dial-in lab racks. 10.0 up support DLSW, Frame-Relay
Switching, X.25. This router
Hi All,
Just a quick note to let everyone(those interested) know that the
"Cisco Secure VPN" results have been posted a the tracking site.
With the newly posted format of the MCNS as of Jan 01, these Channel Partner
exams will serve a purpose in the long run.
By the way I passed, I'll
How can I setup a 2521 as a frame
switch? I have three 2501's and one 2521 with four back-to-back cables,
now what do I need?
ThanksRodney Jackson
Using a router with two serial interfaces is easy to set up as a
frame-switch. You have all of
the equipment, just need to hook the dce end of two cables to one router
(the one you want to
use as your frame-relay switch -1 on each serial int) and the other ends
(dte) to one router each.
(total
38 matches
Mail list logo
