Stus-List New mattress!

Very interesting. Sure hope he saved the template. How about shooting me their contact info. The Admiral may need one once she sees it. Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200 > On May 22, 2016, at 10:48 AM, cnc-list-requ...@cnc-list.com wrote: > > From: Josh Muckl

Re: Stus-List New mattress!

http://www.mattressandfurniturestore.com On May 23, 2016 3:27 AM, "Tom Buscaglia via CnC-List" wrote: > Very interesting. Sure hope he saved the template. > > How about shooting me their contact info. The Admiral may need one once > she sees it. > > Tom Buscaglia > S/V Alera > 1990 C&C 37+/40 >

Stus-List Wheel Turns

I've been messing with my steering and the placement of the wheel stop on the quadrant. My question is, how many turns (or partial turns) of the wheel past midships does your steering system allow? Thanks, David ___ This list is supported by the gener

Re: Stus-List Solar power controllers

Josh: Good point! Not all voltage controllers are the same. Bob Bob Boyer s/v Rainy Days C&C Landfall 38 (Hull # 230) Annapolis, MD (presently in Baltimore) blog: dainyrays.blogspot.com email: dainyr...@icloud.com > On May 22, 2016, at 9:05 PM, Josh Muckley via CnC-List > wrote: > > Bob, I

Re: Stus-List Wheel Turns

David, What model boat and do you have a “quadrant” (looks like a slice of pie) or a radial drive wheel (full circle) on the rudder post? Perhaps the best guide to rudder stop placement can be found in Edson’s steering system planning, installation and maintenance guide found here: http://www.

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

Hi Fred. Sent them an email yesterday. We shall see. Sent from XFINITY Connect Mobile App-Original Message-From: cnc-list@cnc-list.comTo: cnc-list@cnc-list.comCc: f...@postaudio.netSent: 2016-05-22 20:53:28 GMTSubject: Re: Stus-List Standard Horizon 150 wind instrument - cable neededJohn —

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

A phone call might be better. I called them once for an obsolete part. It was no longer even listed. Talked to someone in tech support who said he thought he had seen one sitting on a shelf, and asked for my mailing address. Got the brand-new old part a week later at no charge. Bill Bina On

Stus-List C & C 33-2 Window Replacement 1985

I have a 1985 C&C 33-2 and need to replacement my windows. I am looking to go the route of replacing them with windows that open. Has anybody replaced windows this way before. If so, can you share your thoughts along with the type of window you used. Thanks, Ray LakeHouse Milwaukee, WI ___

Re: Stus-List C & C 33-2 Window Replacement 1985

Ray, I replaced the original framed portlights on my 1976 C&C 38 with Lewmar opening portlights. It was actually a fairly easy job although I did have to enlarge the openings slightly. I used a jigsaw and a “glasfab” blade. I really like having to ability to open the ports when I’m anchored out!

Re: Stus-List C & C 33-2 Window Replacement 1985

A friend did it on a Lancer 30, which was a C&C design around 1978 or so.  I'll try to find out the brand this weekend.RonWild CheriC&C 30-1STL From: Raymond Macklin via CnC-List To: cnc-list@cnc-list.com Cc: Raymond Macklin Sent: Monday, May 23, 2016 8:44 AM Subject: Stus-List C & C

Re: Stus-List Wheel Turns

Hi David, Since you're curious, my wheel is 3 turns lock-to-lock, which makes it one and a half turns from mid to hard-over. It is my routine to do a lock-to-lock check and return to centre before leaving the dock. Which could be a hold-over form the old days, my cruising boats had hydrauli

Re: Stus-List Wheel Turns

I think Peregrine is 1 or 1 1/2 turns. The way our boats were designed, they don't need a ton of the mechanical advantage that increases the number of turns lock to lock to steer them--they are sweetly well-balanced and always fun to steer. On some boats, steering is like having an argument you're

Re: Stus-List Wheel Turns

FWIW, my 30 is just under 3 turns lock to lock.RonWild CheriC&C 30-1STL From: Russ & Melody via CnC-List To: cnc-list@cnc-list.com Cc: Russ & Melody Sent: Monday, May 23, 2016 11:16 AM Subject: Re: Stus-List Wheel Turns Hi David, Since you're curious, my wheel is 3 turns lock-to-

Re: Stus-List Wheel Turns

I was starting to worry that my steering was all wrong, but Andy, you put me at ease as mine is just about 1 turn, lock-to-lock. Diggin' your analogy as well... Chuck B C&C 34 Elusive Somerset, MA On Mon, May 23, 2016 at 12:25 PM, Andrew Burton via CnC-List < cnc-list@cnc-list.com> wrote: > I th

Re: Stus-List Wheel Turns

On my 34, there is a rubber stop on top of the quadrant, on centerline.  It has hard stops on a laminated rib to either side on the bottom of the cockpit.   There is no adjusting, it's an Edson system. I am at about 300 degrees of movement on the wheel from center to hard over. -Chris On Mon

Re: Stus-List Solar power controllers

My Morningstar controller has been sharing duty with the battery charger for years with no ill effects. Joe Della Barba j...@dellabarba.com Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Robert Boyer via CnC-List Sent: Monday, Ma

Stus-List Best self tailing primary winch replacement for 35 Mk II

I love the looks of my beautiful Stainless Barient 28's on my C&C 35MkII, but am facing the reality that as I age, self tailing winches are becoming more of a necessity rather than a luxury... What have other owners found as the best replacement? I want to stay with stainless and fitting the exi

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

Tried but no luck. Ebay and Craig so list no luck. Calling local repair shops and consignment shops. Sent from XFINITY Connect Mobile App-Original Message-From: cnc-list@cnc-list.comTo: cnc-list@cnc-list.comCc: billbinal...@gmail.comSent: 2016-05-23 08:42:43 GMTSubject: Re: Stus-List Stan

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

http://www.winchmate.com/index.html On Mon, May 23, 2016 at 2:33 PM, Joel Aronson wrote: > Greg, > > I had self tailing Barient 28-2 on my 35/3. There is an outfit that will > sell you self-tailers for your current winches, but I can't find the > bookmark. > > Joel > > > On Mon, May 23, 2016 at

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

Greg, I had self tailing Barient 28-2 on my 35/3. There is an outfit that will sell you self-tailers for your current winches, but I can't find the bookmark. Joel On Mon, May 23, 2016 at 2:23 PM, Greg Swetka via CnC-List < cnc-list@cnc-list.com> wrote: > I love the looks of my beautiful Stain

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

John — where is the issue with the cable? From the masthead to the junction box; the box to the instrument; or the connector at the instrument itself? It’s a simple four-conductor with shield cable; there are generic options for you. If it’s the plug, that’s a bit more difficult. — Fred Fre

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

Fred Was getting erratic readings. Sent crew up mast. Removed sending unit and plugged directly to receiving unit Worked perfectly . Checked continuity from junction box to receive unit Was perfect. Only part left is masthead wire. Visual inspection of box at top where send unit plugs in lo

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

Sounds like how my masthead unit slowly died. It became intermittent. Brought it down and it tested fine. Put it back up and it acted up again after a short while. It was just too old. Failure of the wire is possible, but I think less likely. The wire in my mast is inside a narrow conduit. Not

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

First, I would completely discount trying to match the existing hole pattern. It's not difficult to fill and re-drill. To shed some light on your current winch situation, you need to know how the 28's compare to today's winches. Barlow and Barient designated their winches in terms of 100 lbs. S

Re: Stus-List Standard Horizon 150 wind instrument - cable needed

The biggest issue is that the cable is probably permanently attached to the connection block at the masthead; so you’d need to splice new cable to a pigtail of the existing cable near that block. Belden 9534 would be an almost perfect replacement for the existing cable, except that the color co

Re: Stus-List Wheel Turns

Thanks for the info -- my wheel used to do three turns stop to stop but I reconfigured my below decks tiller arm (that sits above the quadrant -- quarter circle) in a way that, unintentionally, will reduce it to 2 turns. I suppose I really should ask what a reasonable maximum rudder angle would b

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

+1 on the ebay and Craigslist. I keep running searches on ebay for all types of stuff, winches being one of them. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On May 23, 2016 3:50 PM, "Dennis C. via CnC-List" wrote: > First, I would completely discount trying to match the existing hole >

Re: Stus-List Wheel Turns

I get a little less than 3/4 of a turn to the port and to the stbd. Whenever I make adjustments I make sure that the amount of travel is equal on both sides and then of course make sure that with the wheel centered it steers a straight course. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On

Stus-List C&C 40 in ectronic Latitude

For you left Coasters... the new issue of Lectronic Latitude notes that there is a Melody Kanschat skippering a Marina del Rey-based C&C 40 Harmony; anyone know the Captain or the boat? I would be neat to get an update or personal account of the voyage and events! Link is: www.latitude38.com

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

Look at this on eBay http://www.ebay.com/itm/191879529313 On May 23, 2016 2:24 PM, "Greg Swetka via CnC-List" wrote: > I love the looks of my beautiful Stainless Barient 28's on my C&C 35MkII, > but am facing the reality that as I age, self tailing winches are becoming > more of a necessity rathe

Re: Stus-List Best self tailing primary winch replacement for 35 Mk II

Don't mess around. Get some Andersen all stainless. They will outlast you and the boat. They are the single best upgrade I have done on my boat, fabulous winches. Cheers, Paul. Orange Crush 27mk2 Sidney, BC > Date: Mon, 23 May 2016 14:23:57 -0400 > To: cnc-list@cnc-list.com > Subject: Stus-Li

Stus-List Horizon Instrument Covers and Bow Anchor Roller for 29 mk II

Any good source for instrument covers that fit the classic square depth gauge and knot meter? Or any ideas for good substitute covers? Second question, I'm thinking about putting a anchor mount/roller on and am wondering if anyone else has done it on a 29 mk II and what mount they used/works best.

Re: Stus-List Horizon Instrument Covers and Bow Anchor Roller for 29 mk II

Add food color to the tank. Helps find the leak Joel On Monday, May 23, 2016, Eugene Fodor via CnC-List wrote: > Any good source for instrument covers that fit the classic square depth > gauge and knot meter? Or any ideas for good substitute covers? > > Second question, I'm thinking about puttin

Stus-List Dumb wiring question

Hey listers -  Forgive the elementary wiring question: I’m running a (single) wire from the running lights circuit on my switch panel to the base of my mast to wire up a windex light. Can I wire the negative return from the light to a negative/ground of one of the other circuits? Or does each c

Re: Stus-List Horizon Instrument Covers and Bow Anchor Roller for 29 mk II

Hi Gene, A well working bilge pump is always a good thing! I have a leak on the fill for one of my fresh water tanks. It doesn’t limit the amount of water I have on board, just leaks when the water level is above the tank level. I am not in a hurry to find it as my bilge pumps all work fine a

Stus-List Wheel turns

t for many years slapping about. I could > check it for continuity this weekend. John -- next part -- An HTML attachment was scrubbed... URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20160523/f7f48bd6/attachment-0001.html> --

Re: Stus-List Dumb wiring question

Andrew, Any common ground should work. All the best, Edd --- Edd M. Schillay Starship Enterprise NCC-1701-B C&C 37+ | City Island, NY www.StarshipSailing.com --- 914.332.4400 | Office 914.774.9767 | Mobile -

Re: Stus-List Dumb wiring question

Grounds can be common so long as you aren't electrically overloading the ground wire - which, adding the load of a windex light to it, is unlikely. I'd say go for it. My mast lights come out of the mast to a terminal strip, there are two ground wires from it back to the ground buss bar, 4 lig

Re: Stus-List Head Foil Feed Funnel

Look directly below your boat! You will find all the items I have dropped also Sent from my T-Mobile 4G LTE Device Original message From: Randy Stafford via CnC-List Date:05/20/2016 11:49 PM (GMT-05:00) To: cnc-list Cc: randy.staff...@comcast.net Subject: Stus-List Head F

Re: Stus-List Wheel Turns

If the autopilot ram is doing double duty as a rudder stop, that is bad. You need to re'locate the rudder stop further inboard on the quadrant to limit travel and then re-set the throw on the AP. Most autopilot Rams will mount roughly 8" from center on your rudder post. Chuck Gilchrest S/V Ha

Re: Stus-List Horizon Instrument Covers and Bow Anchor Roller for 29 mk II

Not sure if you have hot water heater on board, but my pressure relief valve went on mine and it was spraying water whenever I turned on the pump. That was my leak Kevin 30-2 Osprey On Mon, May 23, 2016, 5:09 PM Rick Rohwer via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Gene, > > A well w

Re: Stus-List Head Foil Feed Funnel

It's in 18 feet of murky questionable marina water that I'd prefer not to swim in, even if I could see my hand in front of my face :) Turns out I got great customer service from Head Foil. I sent them a picture and description of the half I didn't drop overboard, and they dated it to the first

Re: Stus-List Wheel Turns

Correction, it's just under 2 lock to lock.Ron From: Ronald B. Frerker via CnC-List To: "cnc-list@cnc-list.com" Cc: Ronald B. Frerker Sent: Monday, May 23, 2016 11:19 AM Subject: Re: Stus-List Wheel Turns FWIW, my 30 is just under 3 turns lock to lock.RonWild CheriC&C 30-1STL

Stus-List the leak

I never get tired of asking this question... "Why are you guys heating hot water?" Thanks for the fun :) Cheers, Russ Sweet 35 mk-1 At 08:50 PM 23/05/2016, you wrote: Not sure if you have hot water heater on board, but my pressure relief valve went on mine and it was spr

Re: Stus-List the leak

Second law of thermo; if you don't it will get cold.And I thought I'd forgotten everything from that set of courses.RonWild CheriC&C 30-1STL From: Russ & Melody via CnC-List To: cnc-list@cnc-list.com Cc: Russ & Melody Sent: Monday, May 23, 2016 11:38 PM Subject: Stus-List the leak

Stus-List Boom to gooseneck attachment

I think I'm losing it.Just put the boom back on.  The saddle on the mast holds a shaft (1/4 in) with an effective opening of about 3in.  My fitting on the boom that slides on that shaft is 2.5in.  To compensate, there is a 1/2 in tube that rides on the shaft.I can't remember; does the tube sit o