Re: Stus-List Intriguing challenge

Rick, This is one of my jib track cars. Just for my 95% jib. Never move them. I have line control adjustable ball bearing cars on my genoa track. I am, however, replacing both cars. If one broke.. I brought the knurled knob home. I drilled and tapped a hole in the remainder of the

Re: Stus-List Westerbeke 33 oil burn

I've put almost 35 hours on the M35B in Imzadi over the past three days (delivery mode enroute to Annapolis). Haven't used any noticeable amount of oil. Rick Brass Washington, NC -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of PETER OCAMPO via

Re: Stus-List Wood restoration question

A white 3M Scotchbright pad is about the same coarseness as bronze wool. DO NOT use steel wool. My PO used steel staples in upholstery, and I have several lines of rust colored pockmarks in the teak. Watco Danish Teak Oil is a very close match for the color of the teak in both of my

Stus-List Engine cooling woes

Hurray!!! That was a good story line on that thread. Is there a moral to be observed? I'll bet you were happy! Colin SV Lindsey Layne 71 C 40C #3 Sent from my iPhone ___ This list is supported by the generous donations of our members. If you

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

The outbound hose is coiled below the sink and the end hangs on a small hook. I just grab it and put it in the sink.                                                   Gary Sent from my Verizon, Samsung Galaxy smartphone Original message From: Dave via CnC-List

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

By the way, our new (to us) 37/40+ has a small electric pump wired to a 12v. rocker switch near the sink.  In our case, the pump draws the water from the refrigerator and pumps it out a bent stainless tube directed into the sink.  I replaced the pump (which had died) with a cheap camper version

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

Lee - Where does the outbound hose go?Coiled under the sink, and pulled out when needed? Would like to plumb mine in somehow. Sent from my iPad On Jun 5, 2017, at 3:37 PM, Lee Rosenbaum wrote: >> On my '85 33-2 we have the ice box drain connected to the foot pump

Re: Stus-List Anyone need/want a really big wheel?

As an aside; I wanted a bigger wheel some time ago, and purchased a folding Wheel from Richard Richard N. Bush Law Offices 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Edd Schillay via CnC-List

Re: Stus-List Wood restoration question

On Mon, Jun 5, 2017 at 6:02 PM, Gary Russell via CnC-List < cnc-list@cnc-list.com> wrote: > I suggest you use bronze wool or a fine Scotchbright pad instead. Ditto on the Scotchbrite. You may remember a recent post I made about cleaning lichen and vine "footprints" off a catamaran I'm prepping

Re: Stus-List Wood restoration question

I would never use steel wool on a boat. The steel fiber will stay on the surface and leave rust stains. I suggest you use bronze wool or a fine Scotchbright pad instead. Gary S/V Kaylarah '90 C 37+ East Greenwich, RI, USA ~~~_/)~~ On Mon, Jun 5, 2017 at 6:54 PM, robert via CnC-List

Stus-List Wood restoration question

Matt, If your 'teak ply bulkhead' is in fact 'veneer' I would not sand ita better way is to make a mixture of TSP, ammonia and water and after wetting the veneer with it, dab 000 steelwool, very fine steelwool and rub over the surface(s).repeat as necessary.rinse with water and

Re: Stus-List Hydraulic Hoses - C 37+

Typo. My area code is 401 Harry Sent from my iPhone 8 beta > On Jun 5, 2017, at 17:35, Harry Hallgring Jr via CnC-List > wrote: > > Ron, > In the area: > Moy Works, Newport > 401-849-4673 > > Ocean Inlay, Tiverton, RI > i...@oceaninlay.com > > Or call me, 491-787-1378

Re: Stus-List Hydraulic Hoses - C 37+

Ron, In the area: Moy Works, Newport 401-849-4673 Ocean Inlay, Tiverton, RI i...@oceaninlay.com Or call me, 491-787-1378 Harry Sent from my iPhone 8 beta > On Jun 5, 2017, at 16:38, Ron Ricci via CnC-List > wrote: > > I had a rigger replace the two hydraulic hoses for

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

I have small square plastic container located under the engine. That hose is connected to that container which has a small bilge pump in it. The pump has a hose that ends under the sink where there is a switch. I take the hose put it in the sink and flip the switch let the water pump into the

Re: Stus-List Hydraulic Hoses - C 37+

The Navtec product is high quality but I found they are super expensive. Years ago I had fluid leaking from the top of the Ram cyliner and unable to hold pressure for 10 minutes. Tthe closest Navtec dealer, 2.5 hrs away wanted $750 to rebuild it and I had to pay up front before they would

Re: Stus-List Hydraulic Hoses - C 37+

Go to Tri-Power in Warwick. On Monday, June 5, 2017 2:38 PM, Ron Ricci via CnC-List wrote: I had a rigger replace the two hydraulic hoses for the Navtec backstays.  The shop he used seems pretty expensive.  Is there anything special about the hoses?  What have

Re: Stus-List Hydraulic Hoses - C 37+

It depends on the hose length and the fittings that have to be attached. I use Lew Townsend in Seattle for any hydraulic work. (206) 935-4678 Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Mon, Jun 5, 2017 at 1:38 PM, Ron Ricci via CnC-List < cnc-list@cnc-list.com> wrote: > I had

Stus-List Hydraulic Hoses - C 37+

I had a rigger replace the two hydraulic hoses for the Navtec backstays. The shop he used seems pretty expensive. Is there anything special about the hoses? What have others paid for these hoses? Regards, Ron Ron Ricci S/V Patriot C 37+ Bristol, RI

Re: Stus-List 33-2 question where does the hose in the bottom of

Interesting that one of your foot pumps is just connected to your refrig drain. On my 33-2, one foot pump is fresh water from the water tank, the other is salt water (in my case). We find the salt water handy for rinsing dishes prior to washing. Mike Amirault C 33ii Lovely Cruise SMSC

Re: Stus-List USCG vessel documentation renewal scam again

I often use a third party auto title place rather than go sit for a lng time at the state DMV. The ten bucks or so they charge seems reasonable. This vessel doc renewal firm fee just seems out of line not to mention their very deceptive looking letter and website. Dennis C. Touche' 35-1 #83

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

> > On my '85 33-2 we have the ice box drain connected to the foot pump under > the sink. > This way we can just pump the water out of the ice box into the sink when needed. We have two foot pumps: 1) for water from the water tank, 2) Water from ice box. Lee Rosenbaum Kookaburra 1985 33-2

Re: Stus-List USCG vessel documentation renewal scam again

Horrifying! He gives all Christians a bad name. Gary S/V Kayhlarah '90 C 37+ East Greenwich, RI, USA ~~~_/)~~ On Mon, Jun 5, 2017 at 3:09 PM, RANDY via CnC-List wrote: > Here's the guy responsible: John Soria, owner of "US Vessel Documentation" >

Re: Stus-List USCG vessel documentation renewal scam again

Here's the guy responsible: John Soria, owner of "US Vessel Documentation" (uscgdocumentation.us) - https://www.facebook.com/captainjohnsoria His Facebook profile introduction says "Jesus is my Lord, my wife is my soul mate, I was destined to be an entrepreneur!". The truth is he's about as

Stus-List Bilge Water Level

>From experience- check the raw-water intake valve on your toilet (make sure it's shut) and the sink drain in the head. They only used single hose clamps, (not double) on mine and short drain and intake cuffs. My loosened and slipped out of place over time without notice...and water in bilge was

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

Well… yes I have had all kinds of stuff spill . I actually keep the drain plugged , so any spillage stays in the cooler and I can drain it. Also I have added refrigeration so spills stay a bit fresher . Tim Sippel MAtico 33mkii From: Della Barba, Joe [mailto:joe.della.ba...@ssa.gov] Sent:

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

I plumbed the ice box drain to a T to my galley fresh water foot pump. A few valves and I can pump salt, fresh or the ice box dry. Out it goes into the sink. Pretty convienet. Sent from my Verizon 4G LTE smartphone Original message From: "Della Barba, Joe via

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

I have the hose leading to a foot pump under the sink. The pump output just goes up into the sink. I'm now adept at mixing cocktails and foot pumping at the same time. (I have a valve just before the footpump that allows me to switch over to the fresh water tank in the event that the

Re: Stus-List USCG vessel documentation renewal scam again

Same here, received the actual USCG renewal today along the third "scam" renewal letter. These folks must be making a killing.. Best regards, Jack Fitzgerald HONEY US12788 Savannah, GA On Mon, Jun 5, 2017 at 1:17 PM, Dave Godwin via CnC-List < cnc-list@cnc-list.com> wrote: > Indeed. Filling

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

Just FYI – you may want to rethink that plan. Ever have milk spill in the icebox? Your boat will smell extra-special for a long time! Joe Coquina C 35 MK i From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Tim Sippel via CnC-List Sent: Monday, June 5, 2017 2:05 PM To:

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

The loop was probably to limit air movement in/out the hose to maintain the cold. Dennis C. On Mon, Jun 5, 2017 at 1:04 PM, Tim Sippel via CnC-List < cnc-list@cnc-list.com> wrote: > On my 85 , it drains into the bilge , it often clogged , I cut out an > access panel and found the hose was about

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

On my 85 , it drains into the bilge , it often clogged , I cut out an access panel and found the hose was about a foot longer than necessary and had a loop in it (wtf) once cut to proper length and loop removed , no issues . Tim Sippel Matico 33Mkii From: CnC-List

Re: Stus-List USCG vessel documentation renewal scam again

Indeed. Filling out my official documentation update form right now. Both the real and scam notices arrived at the same time, confusing my wife. Cheers, Dave Godwin 1982 C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Jun 5, 2017, at 1:09

Stus-List USCG vessel documentation renewal scam again

Got my "courtesy notice" from the vessel documentation scammers today. Even though I've never fallen for it, it really irritates me. Might send them an email saying "nice try, scammers". Again, for those new to the list, uscgdocumentation.us is a third party entity which will charge you about 3

Re: Stus-List Bilge Water Level

The torque specs are on the C website: http://cncphotoalbum.com/ Click "Technical Info" in the left sidebar then click "Torque Specs". Specs are by bolt size. Back off the nuts, then re-torque to spec. If your boat does not have stainless backing plates, replace them. While you're there,

Re: Stus-List Bilge Water Level

Ray I have a 1985 C 33 mk 2 and i noticed that after about 2 days I have about 2 liters of water. I looked at the stuffing box and the raw water intake and other spots and found them to be good. I then took a wet vac and cleaned out the bildge and engine area. used baby pouder and found that

Re: Stus-List Westerbeke 33 oil burn

Persistence has 3GM30F (3 cyclinder yanmar). We also burn oil at about the rate you describe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of PETER OCAMPO via CnC-List Sent: Monday, June 05, 2017 10:00 AM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Re: Stus-List

Re: Stus-List Landfall 43

Looks nice, but that is a long trip home! I would have to go out the Saint Lawrence Seaway and then turn right. AFAIK there are fixed low bridges on the Erie Canal. I was kind of wondering if these were good boats in the first place. I know some C models were not as good as the others. Joe

Re: Stus-List Landfall 43

Joe — there’s been one for sale in our marina for the last couple of years: http://www.yachtworld.com/boats/1985/C%26C-Landfall-43-2440870/Bayfield---Lake-Superior/WI/United-States#.WTV7tTOZNE4

Stus-List Landfall 43

Anyone have one? My wife saw a photo and really liked the boat. I have no experience with them at all. Joe Della Barba DCSI 410-966-7255 ___ This list is supported by the generous donations of our members. If you wish to make a contribution to

Stus-List Wood restoration question

Listers: I recently had my chart table refurbished by a carpenter who does very nice woodwork. Unfortunately, the refurbished chart table highlights that other areas of woodwork need some TLC, most notably the teak ply bulkhead wall that the chart table connects to. Certain areas of teak

Re: Stus-List Bilge Water Level

Start with the stuffing box for the prop shaft. It could be the packing, an easy fix, or it could be an ancient stuffing box hose, which is more painful to replace. Strategically placed paper towels or chalk can tell you where the water is coming from. Right after I bought my current boat, it

Re: Stus-List Bilge Water Level

The bilge on the 33 is tiny...it doesn't take much to fill it up; The suggestions made by Dennis are accurate; if you just launched, it could be extraneous water; keep a close eye on whether you are getting more water or if it was a one-time event... Richard s/v Bushmark4: 1985 C 37

Re: Stus-List Bilge Water Level

Definitely not right. If it doesn't rain, my bilge pump won't pump for days. Check the drive shaft stuffing box first. Dennis C. On Mon, Jun 5, 2017 at 8:31 AM, Raymond Macklin via CnC-List < cnc-list@cnc-list.com> wrote: > I have a 1985 C 33. I have a question regarding water in the bilge >

Stus-List Bilge Water Level

I have a 1985 C 33. I have a question regarding water in the bilge area. I just put my boat in to start the season. I found that my Bilge Pump Float switch was not working. I also found that with the boat sitting in the water, the bilge filled up with water in quite a short time (like it about

Re: Stus-List Westerbeke 33 oil burn

Thanks for the info This is my first marine diesel and i was not sure what is within the. Avg Sent from my iPhone > On Jun 4, 2017, at 7:58 PM, David Castor via CnC-List > wrote: > > No idea what the normal range is but my Westerbeke 21 with 2500 hours burns > very

Re: Stus-List 33-2 question where does the hose in the bottom of the ice box drain to?

That is what we did on our old C 27 as well.  Keep the cooler/fridge water out of the bilge!  You never know what might end up being washed down the hose, and you sure don't want stuff rotting down in the bilge.  Ewww  Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net

Re: Stus-List Westerbeke 33 oil burn

On my old atomic 4 I put a tee in at the oil pressure sender, and screwed in a standard pressure gauge.  I too, wondered about the accuracy of the gauge.  On the Atomic 4, the oil pressure is adjustable, and that allowed me to tune the oil pressure to spec.  I agree that 75 psi is too high,

Re: Stus-List Westerbeke 33 oil burn

Probably, there is about 1 l (1 qt) of oil between the high and low marks on the dipstick (there is probably around 4 l (?), maybe 5 l total in the engine). If you think about it, going through 1 l of oil in 24 h is not that terribly bad, especially considering the age of the engine. Btw. this

Re: Stus-List Intriguing challenge

I help do the same to a pin stop spinnaker car. Worked. Michael Brown Windburn C 30-1 > On Sun, Jun 4, 2017 at 5:46 PM, Jim Watts via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I would drill the top hole way oversize (like 3/8") and pull the whole >> works out through it. >> >> Jim

Re: Stus-List CnC-List Digest, Vol 137, Issue 20

My 35 MK I has two water tanks and only one was listed on the brochure. I always assumed extra tanks were an option not everyone ordered. Joe Coquina -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Lee Rosenbaum via CnC-List Sent: Monday, June 5,