Claudio [EMAIL PROTECTED] writes:
--
Scanner NOT working Working
DVD NOT working Working
SCSI sys NOT working Working
What do you mean by Working and Not working, how does it work on Red
Hat ?
Claudio,
I don't use RedHat, but now I have MDK 8 installed in both, my big box linux
and my Toshiba laptop; I don't have SCSI neither NVdia (I think the
commercial distribution includes the NVdia drivers, but if not, it is easy to
download them from Time page); on the other hand:
Scanner:
Look at /lib/moules/2...mdk
if there is a modules.dep
If not try first to reinstall a precompiled kernel
and look again.
Check also your /etc/lilo.conf if it is updated with this new installed
kernel. If not add them and do a lilo -v.
I suppose it's not your first kernel you install ?
Francisco Alcaraz [EMAIL PROTECTED] writes:
Scanner: detected but not working, just create in my case mknod
usbscanner0 and works fine (Epson 1200 Perfection USB)
what if you do ln -s usb/scanner0 /dev/usbscanner0, does it works ?
--
MandrakeSoft Inc
Any idea whats going on?
what do you have in your /etc/raidtab ?
--
raiddev /dev/md0
raid-level 0
nr-raid-disks 2
persistent-superblock 1
chunk-size 8
device /dev/sda1
raid-disk 0
device
So sprach Serge am Sun, Apr 22, 2001 at 02:41:16PM +0300:
It happened to me too till i added [cooker] in the subject
Ah, so this time we're supposed to put [cooker] in the subject? That's as
good an explanation as last years was (write to Cooker@, instead of to
cooker@)
*G*
Alexander
Write "about:plugins" to see what's installed.
seb
On Sun, 22 Apr 2001, jasl wrote:
I downloaded Mandrake 8.0 and it is wonderful. It look like you had a
very hard work since beta 2 (last I downloaded). It is incredible. Nice
instalation. Nice configuration tools. I haven't found any
Hello,
Been playing with a Logitec QuickCam USB port camera. Actually works! One
problem, though - it seems I can get pictures, but the camera controls don't
work. Example, using gqcam, and moving the sliders for color, bright, etc,
don't do anyting. Same with XawTV, so I don't
Vincent Meyer [EMAIL PROTECTED] writes:
Been playing with a Logitec QuickCam USB port camera. Actually works! One
problem, though - it seems I can get pictures, but the camera controls don't
work. Example, using gqcam, and moving the sliders for color, bright, etc,
don't do
Hello,
Installed this morning's update of wine, and get a message:
Warning: /usr/X11R6/bin/winereal not accessible from a DOS drive.
Ran the winecheck script from Codeweaver's site, and the only thing that
fails is that it can't find winedefault.reg, and suggests that winedefault.reg
Vincent Meyer [EMAIL PROTECTED] writes:
Installed this morning's update of wine, and get a message:
did you install the rpm ?
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
So sprach Claudio am Sun, Apr 22, 2001 at 02:39:32PM +0200:
nslookup, traceroute and ping are even present in Window$, now I cannot find
it in Linux?!?!?!?!?
Are you sure that they are not installed? nslookup is in the bind-utils
package, traceroute is in its own package (and only executable
I too have been having problems with the new Mandrake.
When I do a clean install it hangs during boot at
finding module dependencies, once I do a ctrl+c it
resumes boot, once booted I look in the /boot
directory only to find nothing, absolutely nothing.
Something is not right. Red Hat 7.1
Can't do anything with lilo. I looked in my /boot
directory and it is absolutely empty. I don't know
how the thing even boots. I have tried to install
Mandrake on this machine several times and get this
same problem over and over. Oddly enough though Red
Hat 7.1 will install flawlessly and
On Sunday 22 April 2001 18:55, Alexander Skwar wrote:
So sprach Claudio am Sun, Apr 22, 2001 at 02:39:32PM +0200:
nslookup, traceroute and ping are even present in Window$, now I cannot
find it in Linux?!?!?!?!?
Are you sure that they are not installed? nslookup is in the bind-utils
On Sunday 22 April 2001 16:31, Chmouel Boudjnah wrote:
Francisco Alcaraz [EMAIL PROTECTED] writes:
Scanner: detected but not working, just create in my case mknod
usbscanner0 and works fine (Epson 1200 Perfection USB)
what if you do ln -s usb/scanner0 /dev/usbscanner0, does it works ?
Hello,
I don't manage using GnuPG under tin, but maybe I don't know the right
way to do it?
Anyone got a suggestion?
Thanks you very much,
Greg
http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
PGP
Claudio wrote:
Me and other talked about the scanner problem. It was ignored.
I believe that I was the first to report that problem with the Mustek
12000SP scanner. It seems the SANE mustek backend has some serious
problems with the 2.4 kernels. The SANE package in cooker/8.0 is working
fine
I have installed the 8.0 final on a K6/2-550. This is the BEST version I have used.
However, I encountered a bit of a problem with rpmdrake (not sure if this is
because of me or ... ):
What I did:
1. created a new source; local, mandrake/updates/8.0/
(contained directories RPMS and SRPMS
On Saturday 21 April 2001 23:35, you wrote:
[root@charybdis /home]# mke2fs /dev/md0
mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1667904 inodes, 968 blocks
166698 blocks (5.00%) reserved for the
"Jesse Kuang" [EMAIL PROTECTED] writes:
[...]
I used to do all my installs by ftp, but my isp uses pppoe and I havent
figured out how to do it with that yet
Already written down on my todo. Should be in 8.1 if no major issue
discoverd.
And pptp as well? some isp uses pptp.
Vincent Meyer crivit :
Hello,
Installed this morning's update of wine, and get a message:
^^
[...]
From where?
--
MandrakeSofthttp://www.mandrakesoft.com
PARIS, FRANCE
It seems something changed b/w 7.2 and 8.0.. perhaps the 2.4 kernel is being
used in the install process.
Anyway, what I've noticed so far.
During a graphical install with no working mouse I get to the question about
"Do you have any SCSI Interfaces?"
There's no way to get focus on "OK" for
Shalrath [EMAIL PROTECTED] writes:
Any idea whats going on?
what do you have in your /etc/raidtab ?
--
raiddev /dev/md0
raid-level 0
nr-raid-disks 2
persistent-superblock 1
chunk-size 8
device
--Original Message--
From: my Hartling [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: April 22, 2001 9:41:51 AM GMT
Subject: RE: [Cooker] [fwd] Returned mail: Host unknown (Name server:
smpt2.mandrax.org:
Alexander,
I am getting those same messages (see attached) when sending mail to
Alexander Skwar [EMAIL PROTECTED] writes:
So sprach Warly am Sun, Apr 22, 2001 at 09:15:00AM +0200:
--=-=-=
Name: mandrake-release Relocations: (not relocateable)
Version : 8.1 Vendor: MandrakeSoft
Has webmin been updated to work
Yes I did and I did, actually I just re-installed it using a default install
and it worked, now I just need to add and remove the packeages I want.
- Original Message -
From: "Jan Vicherek" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, April 22, 2001 3:48 PM
Subject: Re:
Hey,
If you want to use oracle on 8.0 you may have to upgrade to the glibc
of cooker, please let me know if you find problems there so we could
do an upgrade.
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
How do you boot the machine exactly ?
With a floppy, or the hd ?
There must be at least a vmlinuz and System.map in your /boot dir.
Did you install a precompiled kernel and looked at /boot after the
install ?
On Sunday 22 April 2001 19:56, you wrote:
| Can't do anything with lilo. I
So sprach Warly am Sun, Apr 22, 2001 at 09:15:00AM +0200:
--=-=-=
Name: mandrake-release Relocations: (not relocateable)
Version : 8.1 Vendor: MandrakeSoft
Has webmin been updated to work with the new release?
Alexander Skwar
--
How to
Hello folks,
Under 7.2, the only wall that stop my laptop to definitively migrate to linux
was my PCMCIA Fast Ethernet Ovislink card; It was impossible for me to
install it.
Now under 8.0 in the installation the card seems to be recognized, but after
that it gives me an error about module
I've been reading all of these posting of patching vmnet to get vmware
to work w/ 2.4.x? Can someone provide me with the url?
Very likely you have chosen a RAID configuration incompatible with the
filesystems. I noticed on a Mylex DAC960 and 3 34G IBM drives that I
could configure RAID5 and it would work flawlessly, but RAID0 was very
particular about the logical arrangement of drives. In particular, 3
logical
DrakConf-0.61-44mdk
I'd never used the thing before, so I was just clicking around randomly
checking stuff out. When I clicked on Printing, it suddenly kicked off
and installed the cups RPMs. Everything else that I clicked on that I
had never used before just had a You haven't used this
There is a problem with the new Mandrake 8 when you select an install with a
latin-american keyboard layout. The AltGr key (the right side Alt) + another
key doesn't work. For example, you can't type the @ symbol (AltGr + q).
The installer puts a Xmodmap file in /etc/X11/xinit for the
Is there a reason why this package changed the way my
fonts work? Lucida became a bit too fancy compared to
the way it used to be...and now arial seems to work
correctly where it was ugly before. Unfortunately
courier still looks awful and I have to use
lucidatypewriter (from mozilla) as my fixed
So sprach Chmouel Boudjnah am Mon, Apr 23, 2001 at 12:43:05AM +0100:
well the 8.1 is just beginned
Sure - I just wanted a reminder to me, him, you to not forget to check
this :)
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage:
On Sunday 22 April 2001 16:02, you wrote:
Claudio [EMAIL PROTECTED] writes:
I mean that now I'm using that horrible Redhat (I HATE IT! IT'S NOT
FRIENDLY, IT POOR, IT'S. NOT MANDRAKE!). I running rh at home for now
I can compile xine+css and it works, sane works, scsi subsystem works.
Have you tried blackburn? It is the only one I could
get to work on several sites.
--- Bill Schweder [EMAIL PROTECTED] wrote:
Every time I go to run a java program like a java
chat or something with any
of the JRE2 package (Sun, IBM and ect.) I always get
applet loading and
nothing more
On Wed, 11 Apr 2001, John Labenski wrote:
less-358-8mdk-i586 and before has a problem viewing plain ascii text, at
least with my setup. When I try to view a text file using $less
.bashrc all I get is ESC[36lESC. when I type $file .bashrc I get
that it's ASCII text, so thats fine. If I type
On 04.22 Arnd Bergmann wrote:
On Sat, 21 Apr 2001, Michael Nelson wrote:
On Sun, Apr 22, 2001 at 12:38:10AM +0200, Arnd Bergmann wrote:
- I have also seen two reports about this on mandrakeexpert.com from today.
- Looks like there is urgent need for an update...
I just finished
Mandrake 7.2 server
On 21 Apr 2001 21:36:45 +0200, Juan Quintela wrote:
eaon == Eaon [EMAIL PROTECTED] writes:
Hi
eaon When I supply the IP (all IPs are static) and path to where the files
eaon are located, then hit enter, I can see on the hub that the lights for
eaon the client and
Alexander,
I am getting those same messages (see attached) when sending mail to known
urls with people as close as my business partner, but, considering the
subject matter I was attempting to transmit, it doesn't surprise as much as
bug me. Also, hard to send is mail re BSA and MickeySoft when
Alexander,
I am getting those same messages (see attached) when sending mail to known
urls with people as close as my business partner, but, considering the
subject matter I was attempting to transmit, it doesn't surprise as much as
bug me. Also, hard to send is mail re BSA and MickeySoft when
So what ever happened to avifile in contribs? It was there a couple
months ago, now it's gone. When I first installed this cooker system, I
could watch avi's out of the box. Then it disappeared (re-installed
at some point). And rpmfind lists no Mandrake RPMs. Searched google
and it turns up
Well,
I changed aic7xxx with aic7xxx_old in /etc/modules.conf, then I deleted
/boot/initrd-2.4.3-20mdksmp.img, regenerated it with
mkinitrd /boot/initrd-2.4.3-20mdksmp.img --preload raid1 --preload raid0
finally riexecuted lilo, reboot and it seems to be ok: no more those timeouts.
On Sunday 22 April 2001 12:45, you wrote:
Alexander,
I am getting those same messages (see attached) when sending mail to known
urls with people as close as my business partner, but, considering the
subject matter I was attempting to transmit, it doesn't surprise as much as
bug me. Also,
--Original Message--
From: William Murphy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: April 18, 2001 1:37:09 AM GMT
Subject: [Cooker] Big Oops...
Late last night I tried a hard drive install, instead of going to bed
(first mistake).
I thought I'd check the option to clean the /tmp
Hello! I've uploaded this file to ftp.linux-mandrake.com/incoming/.
---
Name: proftpd Relocations: (not relocateable)
Version : 1.2.2 Vendor: MandrakeSoft
Release : 0.rc2.0.1mdk Build Date: dom 22 apr 2001
jasl [EMAIL PROTECTED] writes:
it. Ok... perfect. I download the 15MB (as root) It say plugin
succesfuly installed. I restart mozilla... go to java.sun.com it
ask me to install the plugin!!!
what do you have in your /usr/lib/mozilla/plugins ?
--
MandrakeSoft Inc
I downloaded Mandrake 8.0 and it is wonderful. It look like you had a
very hard work since beta 2 (last I downloaded). It is incredible. Nice
instalation. Nice configuration tools. I haven't found any segfault yet.
However I have a little problem: mozilla puglins instalation. I go to
Shalrath [EMAIL PROTECTED] writes:
[root@charybdis /home]# mke2fs /dev/md0
mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
1667904 inodes, 968 blocks
166698 blocks (5.00%) reserved for the super
Well,
I'm testing Rh-7.1 for some problems I'm having at home with Mdk and my PC.
Indeed at the moment the differences are:
Topics Mandrake 8.0Redhat 7.1
--
Scanner NOT working Working
DVD NOT working
53 matches
Mail list logo
