Hoi Johan, en wie dit leest,
Op 29-06-2024 om 19:36 schreef Johan De Schinckel:
Paul
Bij ventoy kun je meerdere iso's zetten op een usb stick.
Als je zowel de 32-bits als de 64-bit install iso's erop zet dan kun je in het
bootmenu kiezen welke je wilt.
Ik wil niet kiezen tussen de ISO's
nodig als 64-bit. Je moet bij Ventoy kiezen welke CD
je wilt lijkt me.
Groet,
Paul
On Sat, Jun 29, 2024, at 17:34, Paul van der Vlis wrote:
Hallo,
Er was een image met zowel amd64 als i386, dit had ik nodig als een
computer een 32-bits bios heeft en een 64-bits processor, zoals sommige
.
Is er een alternatieve methode om te installeren? Ik heb zowel een
64-bits netinstaller als een 64-bits DVD geprobeerd, maar dat lukte zo
in eerste instantie niet. Er kwam vrijwel meteen een foutmelding.
Ik heb nu maar 32-bits geïnstalleerd, maar dat is eigenlijk niet wat ik
wou..
Groet,
Paul
quot;copies" of that file on the
backup link to that one copy. Saves a tremendous amount of room. I keep 7
backup directories on my backup drives (one for each day), and a cron job
fires of the backup each day.
You can take a look at the script at:
https://gitlab.com/paulmfoster/
weet, zelf
gebruik ik bij voorkeur Jitsi Meet.
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
(Debian sid)
Can alt-~ in XFCE switch windows of the same application?
TIA,
Paul
On Wed, May 29, 2024 at 06:47:18AM -0400, Jessica Litwin wrote:
>On Mon, May 27, 2024 at 17:09 Paul M Foster
><[1]pa...@quillandmouse.com> wrote:
>
> Folks:
> At some point this year, I'm moving into a new house, and it is not
> wired
>
On Tue, May 28, 2024 at 03:13:26PM -, Curt wrote:
> On 2024-05-28, Paul M Foster wrote:
> > but I'd rather not. Since the wifi signal will permeate the whole house, it
> > seemed more reasonable to plant a device in each room which could pick up
> > the wifi, and p
ess you have
> more than one computer in a room and they must be wire-interconnected.
If I have more than one internet connected device in room, I just put in a
switch, which is then wired to whatever the source of the internet is in
that room.
Paul
--
Paul M. Foster
Personal Blog: http://no
roperty with a common neutral and common
> ground.
I've never see a 3 phase in a house. Common in commercial/industrial,
though.
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On Tue, May 28, 2024 at 08:15:36AM -0400, Dan Ritter wrote:
> Paul M Foster wrote:
> > We're moving across the state, and from what I've seen, providers there
> > will do something similar-- provide a router and/or modem which has wired
> > and wireless capabilities. Howev
way to get
> an ethernet cable to the other rooms, but in some cases, this just
> isn't practical. I have an ethernet cable up the wall outside my
> house and over the top of the roof, not in a conduit! Been like that
> for more than a decade. But it rarely freezes here. Your
> mileage/kilometerage may vary!
>
> Michael Grant
>
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On Tue, May 28, 2024 at 12:11:32PM +0800, jeremy ardley wrote:
>
> On 28/05/2024 10:05 am, Paul M Foster wrote:
> > It appears there are two solutions. One is wifi extenders, and one is a
> > mesh network. In both cases, the device sits in the room and communicates
> &g
On Tue, May 28, 2024 at 12:43:14PM +1000, George at Clug wrote:
>
>
> On Tuesday, 28-05-2024 at 12:05 Paul M Foster wrote:
> > On Mon, May 27, 2024 at 05:09:02PM -0400, Paul M Foster wrote:
> >
> > > Folks:
> > >
> > > At some point this year,
On Mon, May 27, 2024 at 05:09:02PM -0400, Paul M Foster wrote:
> Folks:
>
> At some point this year, I'm moving into a new house, and it is not wired
> for internet (WHY aren't new houses wired with Cat5/6/7?). The local
> internet provider will likely provide a wireless router,
names? I'd appreciate
it.
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
t appeared in /etc/hosts. There
> is some subtle reason, which I used to know but have now long forgotten,
> why Debian started using 127.0.1.1 in /etc/hosts instead. As far as I'm
> aware, any 127. address will resolve to localhost.
>
My understanding is that 127.0.1.1 is used for hostnames def
On Fri, May 24, 2024 at 06:40:09PM +0200, to...@tuxteam.de wrote:
> On Fri, May 24, 2024 at 11:45:56AM -0400, Paul M Foster wrote:
> > Folks:
>
> [...]
>
> > If I send an email directly to pa...@yosemite.mars.lan from buckaroo, it
> > arrives. That means this co
PD. In fact,
there is or was a bug in it, such that if you had two instances of
127.0.0.1 in your hosts file, OpenSMTPD would fail with a message that it
couldn't listen on address 127.0.0.1 because it was already in use (or
somesuch).
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
that mails
generated from root processes to go an offsite email rather than just root?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
problems with email (Exim4 or OpenSMTPD)?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On Thu, May 23, 2024 at 01:50:21PM -0400, Jeffrey Walton wrote:
> On Thu, May 23, 2024 at 12:08 PM Paul M Foster
> wrote:
> >
> > On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> >[...]
> > > Also, I think you should be using *.home.arp
ult.
>
> --8<---cut here---end--->8---
> So if you use smtp+notls or pure smtp - maybe 'paulf@' is wrong
> here?
I think you may be right.
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On Thu, May 23, 2024 at 12:54:31AM -0400, Jeffrey Walton wrote:
> On Thu, May 23, 2024 at 12:43 AM Paul M Foster
> wrote:
[snip]
>
> On the video server, run nslookup and see if it can resolve yosemite.mars.lan.
Nslookup fails. However, yosemite.mars.lan is in the hosts file
On Thu, May 23, 2024 at 06:38:11AM +0200, to...@tuxteam.de wrote:
> On Wed, May 22, 2024 at 09:37:18PM -0400, Paul M Foster wrote:
> > Folks:
> >
> > Here's a shot in the dark. I've looked up and down the internet, and can't
> > find a solution.
>
> [...]
>
uot;warn: Failed to parse smarthost smtp+notls://pa...@yosemite.mars.lan:25"
Note that the "protocol" doesn't matter. I can use "smtp" alone as the
protocol, and it still won't parse. And yes, yosemite.mars.lan is in my
local hosts file.
Any help would be appreciated.
Pa
On 5/12/24 21:30, David Wright wrote:
On Sun 12 May 2024 at 21:10:16 (-0700), Paul Scott wrote:
On 5/9/2024 1:59 PM, Charles Curley wrote:
On Thu, 9 May 2024 09:32:32 -0700 Paul Scott wrote:
The error I'm getting is during "Install base system." The only way
I knew to sa
On 5/9/2024 1:59 PM, Charles Curley wrote:
On Thu, 9 May 2024 09:32:32 -0700
Paul Scott wrote:
The error I'm getting is during "Install base system." The only way
I knew to save the log was with a camera. Even though I resized the
image this list apparently didn't allow the attac
On Sat, May 11, 2024 at 07:54:28AM +0200, to...@tuxteam.de wrote:
> On Fri, May 10, 2024 at 05:30:44PM -0400, Paul M Foster wrote:
> > Folks:
> >
> > I've installed Debian (latest) without X on a small form factor PC, and
> > typically SSH into it, though I also
with a
reason, I'd be interested. But I'm not really fixated on that. Instead,
what I'm interested in is how to make them stop.
Any help would be appreciated.
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On 5/9/2024 9:32 AM, Paul Scott wrote:
On 5/2/2024 11:31 PM, Sirius wrote:
I would appreciate any thoughts or suggestions,
Check the PCI ids of your Ethernet controller. Download the kernel image
you are considering, check if any of its modules matches these ids. n
I may need to do
"Install base system." The only way I
knew to save the log was with a camera. Even though I resized the image
this list apparently didn't allow the attachment. How else can I save
the log during install?
TIA,
Paul
On 5/3/2024 11:25 PM, Max Nikulin wrote:
On 03/05/2024 13:27, Paul Scott wrote:
In the mean time, an install seemed to be working but gave an failure
error which said it would be in the log and visible on virtual
terminal 4, I didn't know how to get to a virtual in the installer.
Various
On 5/1/2024 10:44 AM, Nicolas George wrote:
Paul Scott (12024-05-01):
I read that I should try a more complete image which I am downloading
(jigdo) now.
Waste of time. The drivers are either in the kernel image or in
individual packages, you can install them on top of what you have.
I
consider that strongly,
Thank you,
Paul
On 5/1/2024 10:57 AM, Sirius wrote:
In days of yore (Wed, 01 May 2024), Paul Scott thus quoth:
Hello,
I have many installs over many years (only a few per year)..
I tried a Testing net install pn my new Acer Aspire 315 and it didn't find
an Ethernet driver. (wireless?).
I read that I
thoughts or suggestions,
Paul
Hoi Geert en anderen,
Op 25-04-2024 om 23:13 schreef Geert Stappers:
On Tue, Apr 23, 2024 at 08:12:05PM +0200, Paul van der Vlis wrote:
Op 23-04-2024 om 18:36 schreef Geert Stappers:
On Tue, Apr 23, 2024 at 11:01:01AM +0200, Paul van der Vlis wrote:
Hoi,
Ik kreeg melding dat een backup
Hoi Geert en anderen,
Op 23-04-2024 om 18:36 schreef Geert Stappers:
On Tue, Apr 23, 2024 at 11:01:01AM +0200, Paul van der Vlis wrote:
Hoi,
Ik kreeg melding dat een backup mislukt was, en ik wou kijken. Het bleek dat
ik ook niet kon inloggen via SSH.
Op een gegeven moment zag ik de melding
-
Let ook op de laatste stuk wat eindigt op "un", net alsof er iets is
weggevallen.
"systemctl unmask dbus-org.freedesktop.login1.service" geeft geen
foutmelding, maar hij blijft "masked".
Iemand een idee hoe dit te debuggen?
Groet,
Paul
--
Pau
is correct, especially if balance is
necessary anymore (it usually doesn't find anything to do anyway), so
please take these periods with caution. My main message is that such
operations can be automated using the linked scripts.
Best regards,
Paul
[1] https://packages.debian.org/bookworm/btrfsmain
riable "mypath". You can surround
"/home/user1/Tools" with quotes if you like, but it is not strictly
necessary.
>
> and $mypath
Here you are actually *using* the variable "mypath".
Here is another example:
NAME="paulf"
echo "My name is $NAME."
/LGBT Debianistas, I'd politely
request you do so without resorting to inflammatory language. I imagine the
term "debian-blacks" would serve just as well without aggravating an already
strongly divided world.
In fact, I suspect the less we pay attention to skin color, the better off
Hoi Richard en anderen,
Het probleem is ondertussen opgelost, zie ook de reply op het bericht
van Geert.
Op 18-03-2024 om 18:20 schreef Richard Lucassen:
On Mon, 18 Mar 2024 14:13:11 +0100
Paul van der Vlis wrote:
Naast networkmanager heb ik ook een verbinding via
/etc/network/interfaces
Hallo Geert en anderen,
Bedankt voor je uitgebreide reactie. Ondertussen werkt het, maar toch
interessant.
Op 18-03-2024 om 22:34 schreef Geert Stappers:
On Mon, Mar 18, 2024 at 02:13:11PM +0100, Paul van der Vlis wrote:
Hallo,
Ik heb iemand een computer verkocht met een nogal standaard
etwerkchip.
Er is geen beveiliging op MAC adres in de router volgens de klant (moet
ik misschien nog controleren).
Hebben jullie verder nog tips? Ik weet het even niet meer.
Groet,
Paul
Dit komt uit de logs:
-
mrt 18 12:55:38 pc7 NetworkManager[615]: [1710762938.7656]
device
On Wed, Mar 13, 2024 at 07:29:39PM +0100, john doe wrote:
> On 3/13/24 16:04, Paul M Foster wrote:
> > Folks:
> >
> > I have a /home/paulf/stow directory with contains subdirectories for each
> > of the packages whose dotfiles I want to manage, like:
> >
alacritty
This adds an *empty* alacritty subdirectory to the git repo, which isn't
useful.
I need a way to bring all these subdirectories and their contents under a
git repo so I can send it to gitlab. Any suggestions?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: htt
which could restrict your
access. I'm in the southeastern U.S. and am easily able to access that URL
with no problems.
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
Hoi Geert en anderen,
Op 21-02-2024 om 22:35 schreef Geert Stappers:
On Wed, Feb 21, 2024 at 04:02:59PM +0100, Paul van der Vlis wrote:
Op 20-02-2024 om 21:02 schreef Geert Stappers:
On Tue, Feb 20, 2024 at 09:31:02AM +0100, Paul van der Vlis wrote:
Hallo,
Ik heb een setup waarbij ik boot
Hoi allen,
Op 20-02-2024 om 09:31 schreef Paul van der Vlis:
Hallo,
Ik heb een setup waarbij ik boot vanaf USB met grub. Het valt me op dat
dit steeds trager wordt, op dezelfde machine:
Debian10: 18 seconden
Debian11: 60 seconden
Debian12: ruim 120 seconden
Wat vooral lang duurt
ebruiken als je
die applicatie sluit, bijvoorbeeld poort 80 als je een aanwezige
webserver sluit.
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Hoi Geert en anderen,
Op 20-02-2024 om 21:02 schreef Geert Stappers:
On Tue, Feb 20, 2024 at 09:31:02AM +0100, Paul van der Vlis wrote:
Hallo,
Ik heb een setup waarbij ik boot vanaf USB met grub. Het valt me op dat dit
steeds trager wordt, op dezelfde machine:
Debian10: 18 seconden
Debian11
Hoi Richard en anderen,
Op 20-02-2024 om 12:27 schreef Richard Lucassen:
On Tue, 20 Feb 2024 09:31:02 +0100
Paul van der Vlis wrote:
Ik heb een setup waarbij ik boot vanaf USB met grub. Het valt me op
dat dit steeds trager wordt, op dezelfde machine:
Debian10: 18 seconden
Debian11: 60
al verschillende USB naar SATA kabels geprobeerd, maar
dat lijkt ook niet het probleem.
Hebben jullie ideeën hoe ik dit booten vanaf USB sneller krijg?
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Am 31.01.2024 um 23:12 schrieb Tixy:
On Wed, 2024-01-31 at 21:59 +0100, hw wrote:
On Wed, 2024-01-31 at 08:02 +0100, Paul Leiber wrote:
Am 25.01.2024 um 22:28 schrieb Paul Leiber:
[...]
Some people on xen-devel pointed out to me two unhandled SMC calls in
the boot logs which could be the root
After an upgrade of Debian 11 yesterday, Thunderbird 115.7.0 now has an
inbox issue where the listings move making it difficult to save or
delete them! I had this exact issue with Debian based Antix 22 after a
recent upgrade. That problem was resolved by a subsequent upgrade from
Am 31.01.2024 um 19:07 schrieb Andrew M.A. Cater:
On Wed, Jan 31, 2024 at 08:02:47AM +0100, Paul Leiber wrote:
Am 25.01.2024 um 22:28 schrieb Paul Leiber:
Paul
[1]
https://lists.xenproject.org/archives/html/xen-devel/2023-10/msg00796.html
[2] https://developer.arm.com/documentation/den0098
Am 25.01.2024 um 22:28 schrieb Paul Leiber:
Dear Debian user list members,
I am trying to run network related stuff (Samba, Zabbix) on a Raspberry
Pi 4B in a virtualized environment using Debian Bookworm and Xen. I am
running into reproducible complete system crashes/reboots due to a Xen
Op 27-01-2024 om 23:43 schreef Richard Lucassen:
On Sat, 27 Jan 2024 14:16:52 +0100
Paul van der Vlis wrote:
Ik neem aan dat de user wel lid is van de groep ssl-cert. Eerst
uitloggen en weer inloggen voordat de user echt tot de groep hoort.
Misschien is dat het?
Alles in /etc/letsencrypt
Op 27-01-2024 om 00:00 schreef Richard Lucassen:
On Wed, 24 Jan 2024 15:15:37 +0100
Paul van der Vlis wrote:
Op een vers geinstalleerde Debian12 heb ik een raar probleem met
LetsEncrypt certificaten. (Ik gebruik certbot, weet niet of dat van
belang is.)
Eerder was het zo dat gebruikers die
nd,
this is related to commands coming from userspace, so I am not sure that
strace helps during the boot process.
I'd appreciate it if somebody more knowledgeable would point me in the
right direction. If more information is needed, I can provide it.
Thanks,
Paul
[1]
https://lists.xenproject.o
mag erbij.
Weet iemand hier meer van? Ik zag geen bug.
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Hoi Geert en anderen,
Op 22-01-2024 om 07:00 schreef Geert Stappers:
On Sun, Jan 21, 2024 at 11:10:49PM +0100, Paul van der Vlis wrote:
Hallo,
Ik probeer een database te importeren in MariaDB,
A.u.b. iets `head -n 42 de_database_dump` laten zien
zodat duidelijk wordt wat de character_set
: '\xF0\x93\x81\xB4' for
column `edagenda`.`Test`.`names` at row 1
MariaDB [edagenda]> INSERT INTO Test VALUES('a');
Query OK, 1 row affected (0,004 sec)
Iemand een idee?
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Op 10-01-2024 om 11:15 schreef Paul van der Vlis:
Misschien heb ik de oplosssing. Ik heb de loglevel van "3" veranderd in
"INFO".
Het probleem is hierdoor opgelost ;-)
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Hoi Gijs en anderen,
Op 10-01-2024 om 10:12 schreef Gijs Hillenius:
On 10 January 2024 09:06 Paul van der Vlis, wrote:
Hoi,
Sinds kort heb ik er last van dat fail2ban erg grote logfiles heeft,
nu is hij bijvoorbeeld alweer 5,9GB. Volgens mij gaat het om SSH
aanvallen. Ik heb maar weinig
(?:[0-9a-fA-F]{1,4}::?|::){1,7}(?:[0-9a-fA-F]{1,4}|(?<=:):)))\\]?|(?P[\\w\\-.^_]*\\w))(?:\\s|$)'
Zegt jullie dit misschien iets?
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Hoi Arjen,
Op 05-01-2024 om 17:54 schreef Arjen Bax:
Hoi Paul,
Verbazingwekkend dat sftp met filezilla niet werkt en met de standaard
sftp-client wel.
Inderdaad heel raar. Bij twee Windows klanten lukte het wel met WinSCP,
en mij lukte het ook wel met gFTP. Hetzelfde probleem ook bij een
via "systemctl
start opensmtpd". According to "sudo smtpd -n", the configuration file
passes, but it just won't start.
(For what it's worth, I've used this config back in 2021 running Debian and
it worked.)
I'm happy to supply whatever data needed in helping to resolve this.
Op 01-01-2024 om 23:49 schreef Paul van der Vlis:
Hoi,
Raar probleem met Filezilla, ik kan er opeens niet meer mee connecten
via SFTP. Ik krijg een "connection refused". Mijn klant krijgt een
timeout. Een paar dagen geleden deed het het nog, zowel bij mij als bij
klant.
En wa
On Sun, Dec 31, 2023 at 11:12:12PM -0500, Greg Wooledge wrote:
> On Sun, Dec 31, 2023 at 10:51:25PM -0500, Paul M Foster wrote:
> > Apparently, something was wrapping lines to
> > about 75 characters, and putting an equals sign at the end of every line
> > w
.
Als ik gFTP of sftp gebruik dan gaat het goed, en krijg ik ook meldingen
in de logs. Het lijkt dus niet aan de server-kant te liggen.
Werkt het bij jullie wel? Je krijgt automatisch SFTP als je poort 22
gebruikt. Ik doe dit op Debian 11.
Groet,
Paul
PS: weten jullie hoe je dat "sno
add a From if an email isn't properly formatted.
So my first question is, what is wrapping the lines on my incoming emails,
and how do I fix it?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com/paulmfoster
On Fri, Dec 08, 2023 at 11:04:54AM -0600, David Wright wrote:
> On Fri 08 Dec 2023 at 11:56:12 (-0500), Paul M Foster wrote:
> >
> > I'm on Debian bookworm, using neomutt for email. Where there is an image to
> > view, viewing it in neomutt calls up one of the ImageMagick pr
g
pointing to the imagemagick program, then where the heck is it getting that
as the program to use to display images?
Second, how do I fix this so that mutt uses feh to display images?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Proje
per.
TIA,
Paul
JPEG images.
I've used Xpdf from Arch, and it's an entirely different program. My
understanding was that the Arch version depended on poppler. I can only
imagine that the version in Debian is different because there is a
licensing issue with the poppler code. Just a guess.
--
Paul M. Foster
Persona
On 12/5/23 6:23 AM, Eric S Fraga wrote:
I use zathura which is also quite light but I'm not sure if you can
print from it. I tend to print directly using lp although very
infrequently in any case.
I do a lot of printing from zathura but have had trouble setting up
print preview..
Paul
CUPS printers.
>
> Thanks for any recommendations.
>
> Best regards,
>
> -Tom
>
I use xpdf, which is extremely simple and will allow printing. Don't think
it has a CLI interface. However, I would imagine that simply feeding a PDF
to the printer should work for printing.
het installeren van een andere "greeter" die
automatisch hoge resolutie ondersteund. Dit kan door het pakket
"slick-greeter" te installeren, het wordt dan automatisch gebruikt. Het
ziet er mooi uit, en ik denk erover het standaard te gaan gebruiken.
Maar nog weinig ervaring m
On Sat, Nov 18, 2023 at 09:29:02AM -0500, Dan Ritter wrote:
> Paul M Foster wrote:
> > After using claws-mail for a number of years, I'm testing the idea of going
> > back to mutt and fetchmail. One problem I've encountered is how to get
> > local mail in /var/mail/pa
smarthost, but I'd rather not add another daemon. Does anyone know a way to
have mutt and/or fetchmail grab mail from /var/mail/paulf to
/home/paulf/Mail/in?
Paul
--
Paul M. Foster
Personal Blog: http://noferblatz.com
Company Site: http://quillandmouse.com
Software Projects: https://gitlab.com
Hallo Wouter en anderen,
Op 09-11-2023 om 11:55 schreef Wouter Verhelst:
On Wed, Oct 11, 2023 at 09:34:19PM +0200, Paul van der Vlis wrote:
Kan iemand me misschien uitleggen waarom het aanmaken van een disk via
virt-manager anders is? En of hier misschien iets aan te doen is?
Je hebt al het
od old System V and BSD 4.3) have
mkfile and mkdir - so surely that means that everything (stored on a bit of
rotating rust) is *not* a file :-)
Cheers!
--
*Paul Duncan*
Lead Marine Technician, RV Falkor(too)
SCHMIDT OCEAN INSTITUTE
mobile +1 650 387 4151
VOIP +1 954 672 4943
www.schmidto
unning KDE as desktop.
Are there any fixes around? Or are the only options currently to
downgrade to bullseye or switch to another version of Linux? I would
hate that as I am a 20+ years user of Debian but this is a "show stopper".
Paul
Hallo Geert en anderen,
Op 12-10-2023 om 20:44 schreef Geert Stappers:
On Wed, Oct 11, 2023 at 11:01:45PM +0200, Paul van der Vlis wrote:
Op 11-10-2023 om 22:06 schreef Geert Stappers:
On Wed, Oct 11, 2023 at 09:34:19PM +0200, Paul van der Vlis wrote:
Hallo,
Als ik een virtuele disk aanmaak
Op 11-10-2023 om 22:06 schreef Geert Stappers:
On Wed, Oct 11, 2023 at 09:34:19PM +0200, Paul van der Vlis wrote:
Hallo,
Als ik een virtuele disk aanmaak met:
qemu-img create -f qcow2 /path/naam.qcow2 1000G
Dan krijg ik een disk die volgens "ls" maar een paar KB groot is, en
is?
( Het is me (nog) niet gelukt om een disk aan te maken met "qemu-img" en
deze dan te gebruiken in virt-manager. )
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Windows box. Since I'm unhooking my KVM switch setup to
make my wife happy (she's a neat freak and I'm not), I'll have to
manually unplug KVM cables from the Debian box to hook up them up to
the Windows box, so laziness and the desire for weening from Windows
will probably dictate option 1.
iptables, in this way you can see if the packets reach
the machine.
With regards,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl
Op 03-09-2023 om 15:01 schreef Paul van der Vlis:
Hoi Cecil, Geert, en anderen,
Op 03-09-2023 om 00:13 schreef Cecil Westerhof:
Geert Stappers writes:
On Sat, Sep 02, 2023 at 06:02:16PM +0200, Cecil Westerhof wrote:
Cecil Westerhof writes:
Tijdens een apt upgrade krijg ik:
libdvd
# nu moet het goed zijn.
Maar hoe het dan verder gaat weet Geert denk ik beter...
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Op 01-09-2023 om 20:51 schreef Geert Stappers:
On Fri, Sep 01, 2023 at 02:03:31PM +0200, Paul van der Vlis wrote:
Op 01-09-2023 om 10:44 schreef Paul van der Vlis:
Zou zoiets niet kunnen?
ExecStart="su - baz -c /usr/bin/foo /etc/foo/config"
Nee fout. Ik had je vraag niet goed gele
Op 01-09-2023 om 10:44 schreef Paul van der Vlis:
Zou zoiets niet kunnen?
ExecStart="su - baz -c /usr/bin/foo /etc/foo/config"
Nee fout. Ik had je vraag niet goed gelezen.
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
ExecStart=/usr/bin/foo/etc/foo/config
User=
Zou zoiets niet kunnen?
ExecStart="su - baz -c /usr/bin/foo /etc/foo/config"
Of eventueel een script aanroepen wat dit uitvoert?
Groet,
Paul
[Install]
WantedBy=multi-user.target
```
Hoe zou dat kunnen?
Groeten
Geert Stappers
el kunnen proberen dan, wellicht is
het probleem daar opgelost.
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
Op 30-08-2023 om 21:05 schreef Paul van der Vlis:
Op 30-08-2023 om 11:01 schreef Gijs Hillenius:
Goedenmorgen!
Ik probeer mijn Thinkpad trackpoint te versnellen.
Dat ging vroeger met iets als:
echo 255 > /sys/devices/platform/i8042/serio1/speed
en ook
echo 200 > /sys/devices/platform
, het
is een kwestie van hoe je hem gebruikt. Ik heb honderden Thinkpads
verkocht, nog nooit is deze vraag gekomen.
Wellicht is dit interessant, voor de techniek die ze gebruiken:
https://github.com/VP1147/thinker/issues/1
Groet,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl/
--show-domain-console "win11"
It seems to be faster when you use another driver for your virtual disk.
There are many manuals for setting it up. It's not really difficult.
With regards,
Paul
--
Paul van der Vlis Linux systeembeheer Groningen
https://vandervlis.nl
1 - 100 of 17814 matches
Mail list logo