hf rigs today,
anyone can do this and get within 100cps where you can
capture without going to a df that covers another channel.
with a little cooperation, this can be fun !
lacking VK & S.America for wac on jt65a.
what say ?????
david/wd4kpd
ps.some standardization should be considere
worked ZS6 on 18/14/10 today with WSJT/jt65a. numerous
callsigns all day on 14. this mode could catch on for hf.
wonder who will get vucc via hf first ?
david/wd4kpd
Thank you.
--- In digitalradio@yahoogroups.com, Joe Veldhuis <[EMAIL PROTECTED]> wrote:
>
> Pactor 1 ARQ.
>
> -Joe, N8FQ
>
> On Sat, 24 Mar 2007 22:12:33 -
> "David Kruh" <[EMAIL PROTECTED]> wrote:
>
> > http://www.bambinomusical.c
http://www.bambinomusical.com/screenshot1.jpg
This signal was on 7068 Saturday afternoon ET. It is a pulsing signal
that I cannot identify. Thanks for your help, group.
David
WB2HTO
down in the shack and download EasyPal
and it will all go a lot easier. But it's fun teaching an old dog (not
me, but my TS-120 as well as my laptop) some new tricks...
David
WB2HTO
;t point me out as the sole abuser.
i promise Andy, this will be my last on this issue.
david/wd4kpd
"Live with it, and get used to it"
then QRM it.
david/wd4kpd
Okay, I have downloaded and installed MultiPSK and am ready to try this
new mode out. What are the best frequencies and times to listen for
Olivia signals? Also, I understand there are variations in the mode -
what do I operate and where?
Thanks again for everyone who has chimed in. The contest this weekend
has made contacts difficult, but conversations with WD4KDK, N0TAO,
N7AXL, and W0CYF and reading the postings I am pretty sure that between
Windows Me (a real piece of you-all-know-what) and the relative
slowness of the PII 1
giTRX over the current offerings but I've never been one to follow
the
> pack
> as it were.
>
> What do you mean the constellation never stabilizes?
> Can you pass along your settings as you have them?
>
> I noticed that Andrew sent you a message. He's pretty good with the
I can't use Easy Pal because I'm running Windows Me on on older Dell
Laptop. I run DIGTRX and can see the ID in the waterfall but the
constellation never stabilizes to see the picture. Does anyone use
DIGTRX?
Dave
guessing the freq is around 1807, but when ?
david/wd4kpd
do the best on hf as it does on 1.2ghz
and up EME (as i understand it). seeking comments on this.
david/wd4kpd
You should be able to pick up a used Pk-232 or KAM on Ebay for less than
$100.00
Dave wrote:
I've burned up a lot of bandwidth in my quest for a way to key my
IC-746 (non-Pro) with FSK instead of AFSK RTTY, so this will be my
last post on the subject.
I'm looking for a used interface, TNC, or
You want an RS-232C serial cable with a DB-9 female connector on one end
and a DB-25
male connector on the other... Most electronic/computer stores hsouls
have it.
Dave WB2FTX
AD5VJ Bob wrote:
I am trying to set up my PK-232MBX.
Can anyone tell me what the proper nomenclature is for the cab
Harv,
Are these two Pk 232MBX's Pactor I compatible? If so I'm interested in
them.
Dave WB2FTX
Harv Nelson wrote:
I've got two pk-232's sitting here that haven't been used for a few
years if anyone wants one I'll ship 'em anywhere. let me know what
you think they're worth.
Harv Nelson,
now would be a good time to get the arrl cw practice down in the
area that they themselves recommend for cw.
david/wd4kpd
desire to
reconsider.
just wondering what will happen ?
david/wd4kpd
please excuse my last.i didnt orginate the remark, was supposed
to be a quote.
its still true
david/wd4kpd
Your point was "QRM is inevitable -- live with it".
My point is "QRM from unattended stations is preventable; stop making
excuses and fix it".
david/wd4kpd
Just so you are aware. There are some of us who don't think that Winlink
2000 is the answer to our prayers.
Most of NTS Digital is still running Classic Winlink 2.9 which doesn't
offer internet forwarding and relies upon direct forwarding from each
Winlink
NTSD station via RF. We favor automatic
Who are you calling dishonest or ignorant?
Look at the facts. As I've said in other posts there is a difference
between Winlink 2000 stations running primarily e mail and NTS Digital.
We operate Winlink Classic 2.9 and don't use internet forwarding. We
prefer to use HF automatic forwarding to
system is
scanning the frequencies but does not issue automatic connects. It
requires an connect attempt from a manned system before it will respond.
Semi-automatic operation will move below 3600 Khz after the 15th, in
the 3590 to 3600 region.
Dave WB2FTX
Roger J. Buffington wrote:
David Stru
There are other digital automatic users besides the email Winlink 2K
systems you cite. The National Traffic System (certainly a part of ham
radio, and has been around for over 50 years) uses the automatic section
of 80 meters for passing traffic thru the NTS Digital system. The FCC
new rule w
any ssb away.
david/wd4kpd
anarchy and chaos always win !
DON'T KNOW FOR SURE, BUT WOULD SEEM THAT USING SOME TYPE
OF INSTANT MESSAGING LIKE YAYOO/AIM/MSN ETC WOULD BE MUCH
QUICKER...PERHAPS THERE IS A WAY FOR EVERYONE TO MONITOR
A SINGLE CHANNEL.
DAVID/WD4KPD
data set side by side.
david/wd4kpd
YES YES YESTRYING TO INSTALL SOMETHING NEW IS A BOOGER !
IS ALSO MY REASON FOR NOT SWITCHING.
DAVID/WD4KPD
i have a nice KDS vs-190i monitor for the station. i am familiar with
the term native resolution, and run the monitor in that mode (1280/1024
in true color).
the monitor and video card will run many different sync rates. how does
one determine the best sync freq
david/wd4kpd
I would like to announce that I have posted "fldigi", release 1.01.
This release consists of GPL source code written in C++ and uses the
Fast Light Toolkit gui support libraries. There is also a
pre-compiled binary that is known to operate on several Linux distros
including the Ubuntu derivatives
Sound card software will not work very well with Pactor because of the
timing requirements with
the burst mode
Dave WB2FTX
[EMAIL PROTECTED] wrote:
> Hello all,
> Does anyone know of a way to both copy and transmit on pactor? I need
> to put together a small digital station with just the xcvr
PERHAPS IF WHAT IS TRANSMITTED IS NOT FOR DIRECT HUMAN CONSUMPTION
AND GRATIFICATION, THEN IT IS NOT DATA.
JUST GONNA HAVE TO WAIT AND SEE AFTER ALL THE SHOUTING IS OVER.
DAVID/WD4KPD
FYI
Dave WB2FTX
Dave Bernstein wrote:
--- In digitalradio@yahoogroups.com,
"expeditionradio"
...> wrote:
>snip<
As for the supposed "loss" or "disappearance" of the automatic band at
3620kHz to 3635kHz, I do not believe this FCC error should be allowed
to stand for very long.
Danny Douglas wrote:
> Hmm tried to initiate a messge with my present email address, which I have
> used over a year this month, and suddenly Yahoo doesnt know me? I have
> rejoined. The following is of great interest in the US and affect hams
> world wide, in particular digital ops, who have los
ian parkinson wrote:
>
> I think the Kam etc are great, I had thought of hooking a couple up on
> 466 Mhz and leave messages in a neighbours M.box for playing chess.
Do you mean PMR446?
If so, don't let the authorities catch you, as it's not legal to use
anything other than voice on PMR446...
(
Andrew O'Brien wrote:
> I have been "QRV" on digital voice ,using WinDRM, and thought I would offer
> some rookie/newbie random thoughts.
>
I think that you may be looking at this from the wrong angle, Andrew,
DRM is intended as a very high quality mode, capable of very high
quality reproduc
I knew I had seen it somewhere...
http://kb.flex-radio.com/article.aspx?id=10218
Dave (G0DJA)
[EMAIL PROTECTED] wrote:
> Dave,
>
>
>> One of the problems with the SDR1K documents is that they use VAC
>> version 3 and I have version 4.
>>
>
> See the "note" at the bottom of page 146 of t
[EMAIL PROTECTED] wrote:
> Dave,
>
>
>> One of the problems with the SDR1K documents is that they use VAC
>> version 3 and I have version 4.
>>
>
> See the "note" at the bottom of page 146 of the latest SDR1K (1.6.2)
> Operating Manual.
>
> Trevor G0KTN
>
Mind you, that doesn't expla
[EMAIL PROTECTED] wrote:
> Dave,
>
>
>> One of the problems with the SDR1K documents is that they use VAC
>> version 3 and I have version 4.
>>
>
> See the "note" at the bottom of page 146 of the latest SDR1K (1.6.2)
> Operating Manual.
>
> Trevor G0KTN
>
Thanks Trevor,
I wish I had
David Ackrill wrote:
>
> I'm hoping that might cure some of my other problems now...
>
Unfortunately not. :-(
The characters are still coming through distorted. I see the occasional
couple of correct characters and the rest are corrupted. This is the
same with whatever
Alan Biddle wrote:
> Dave,
>
> Go to http://www.flex-radio.com/Expert_Setups/expert_setups.htm
>
> and download the first article, "VAC Setup With PowerSDR."
I've found the problem with no received audio in MMSSTV!
In Control Panel>Sounds & Multimedia I had VAC Cable 2 in 'Playback' and
Cable
Alan Biddle wrote:
> Dave,
>
> Go to http://www.flex-radio.com/Expert_Setups/expert_setups.htm
>
> and download the first article, "VAC Setup With PowerSDR." While much
> is specific to the SDR-1000, there is a good general discussion of how
> to set up several programs, including MMTTY. There
Andrew O'Brien wrote:
> Anyone figure out how useful this might be for digital radio modes ?
> Andy K3UK
>
I bought it (it costs $39) and cannot get it to work with some digital
programs. They do not recognise the virtual connections as being
soundcards and I have not yet managed to set them
Andrew O'Brien wrote:
> Anyone figure out how useful this might be for digital radio modes ?
> Andy K3UK
>
Just found another program that I can't find a way to get it to work
with VAC, this one is MMSSTV.
Dave (G0DJA)
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Oth
which live cd has this program ?
david/wd4kpd
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion)
Yahoo
DuBose Walt Civ AETC CONS/LGCA wrote:
> David,
>
> Look seriously at the SDR-1000 (http://www.flex-radio.com).
>
> Walt/K5YFW
>
I've just bought another SDR1000 (finger trouble on my early one meant
that I decided to start from scratch with a ready built unit) and
got full bw thruput (slight rolloff low with EQ to off/flat), but level
input is touchy to the mic. would like a rig that doesnt require me to
run anything thru the mike if possible, makes switching cables etc a pain.
so which rig ??? (not opposed to SDR if it can work)
david/wd4kpd
N
Please excuse top post - Still resetting options.
Well, for a start, you are assuming that the other person is in and
listening. ALE wont help in that case. Just like calling someone on
their mobile phone and they have it switched off, or don't answer.
Plus, who's going to keep and distribu
only way to make it work here is to uninstall windows defender.
i might like to install that vc8 dist. what is it pse ?
david/wd4kpd
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup
LIBRARY MSVCP80.DLL(REQUIRED BY
C:\PROGRA~1\WIFD1F~1\MPSHHOOK.DLL)
ENSURE THAT IT IS INSTALLED.
I HAVE DOWNLOADED THE MSVCP80.DLL AND PUT IT INTO THE WINDOWS\SYSTEM DIR.
MACHINE IS XP.
DAVID/WD4KPD
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of inte
FOR THOSE OF YOU USING MANY PROGRAMS THRU YOUR SOUND CARD..THIS PROGRAM
SAVES YOUR SETTINGS BETWEEN PROGRAMS.
VOLSET AND QUICKMIX.
I CAN SEND YOU EITHER ONE IF NEEDED.
DAVID/WD4KPD
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW
of them play at the same,
in a loop and it is up to the receiver to seperate the modes.
would really guess that the real question is what freq to run such an
animal on the bands
david/wd4kpd
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The
does anyone recall a project that incorporated several digital modes
stacked in audio frequency and used as a beacon ?
i created some files for myself, and lost them, and cant remember how i
made them. so looking for the other guys that had the same idea.
david/wd4kpd
Need a Digital mode
it really matters little, if i understand it right, they will not be in
the amateur bands.
david/wd4kpd
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http
Now I know why I didn't mind giving up ham radio for a career and
raising a family back in the seventies...
The pettiness and slander and arguments among hams that I use to hear
on SSB are now on this media, and to no one's benefit except maybe the
hams making the comments.. Why do a few hams fe
*http://www.polar-electric.com/Morse/MRP40-EN and it costs around $63.*
Hi Guys look at this site>>>>>http://fmyers.com/
This may work ok and it is FREE
73
David
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflecto
GEE...I THOUGHT I WAS THE ONLY ONE THAT NOTICED THIS LAST NIGHT !!!
A QUOTE FROM ANOTHER REFLECTOR.
"W1AW has decided to break the ARRL's own bandplan and
operate on 1807.5.
I have a big problem with this. DXers do not own 160. They
can bend a little bit. The ARRL also sets a terrible
exampl
I think the title of this string should be changed. Most of the
comments have really no idea of the difference between
NTSD running "Classic Winlink" in the auto control subbands and Winlink
2000. I operate within the auto control subbands
in automatic mode connecting to other NTSD stations
Again,
I emphazise that NTS exclusively operates in the auto control band plan
the actual scenario of QRM from an autocontrolled NTS station is remote.
I have seen my station delay tranmitting due to RTTY, Pactor, and CW
stations on frequency
Dave WB2FTX
Dave Bernstein wrote:
Yes, lots
have been using VOLSET for long time
if you need it...pse email.
it is 465kb zip file.
david/wd4kpd
>
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: h
is not relevant to HAM radio.
This should be abolished at once. Now how does one do this. The only
logical way at the moment is to make the PACTOR lll available to all. In
that way amateurs can see what is being sent and make good arguments
against such transmissions. Just my humble thoughts.
7
ope this helps
Dave WB2FTX
John Bradley wrote:
and where might those frequencies
be?
-
Original Message -
From:
David
Struebel
To:
digitalradio@yahoogroups.com
Sent:
Sunday, January 15, 2006 10:58 AM
Subject:
Re: [digitalradio] NTS and
John,
You are grossly misinformed. The Winlink stations on the frequecies you
list are Winlink 2000 stations handling e mail messages.
NTSD operates almost exclusively in the small automatic control band
segments.
Dave WB2FTX
John Bradley wrote:
I would like to point out tha
tp://groups.yahoo.com/group/digitalradio>" on the web.
>
> * To unsubscribe from this group, send an email to:
>[EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>
1.371 / Virus Database: 267.14.17/229 - Release Date: 1/13/2006
>>
>>
>
>
>
>
> Need a Digital mode QSO? Connect to 66.24.209.78
>
> Other areas of interest:
>
> The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
> DigiPol: http://grou
Andy,
I can connect BUT...
(paste of results follows)
[EMAIL PROTECTED] kb3efs]$ telnet
telnet> open cluster.dynalias.org
Trying 66.24.209.78...
Connected to cluster.dynalias.org.
Escape character is '^]'.
K3UK WinCluster Lite - Version 2.3.8 - Telnet Port 1
Hello 97-82-syr-ny.dialin.a-315.weste
Winlink 2000 has solutions to many of the requirements that you list.
However in all cases until the computer calls
and delivers the message with an automated voice it still requires
trained operator at the delivery end.
There is an active NTS digital network but lacking in stations willing
t
There is an active digital system in NTS called NTSD employing Winlink
software and coverage from area to area.
Many NTS operators keyboard into these NTSD stations but the main
problem as always is getting the trafic delivered
locally. It makes no sense to be able to relay trafic via HF digi
I am sorry I brought the subject up and created such a firestorm.
Should the group owner desire it I well leave the group.
Dave - KB3EFS
__
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
Need
That is true John.
Another option is to access the IRLP system via 2m to
one of the three IRLP nodes in WV.
NodeCallCitySt Freq.
4688KC8KXI Clarksburg WV 443.
4873KC8NDZ Charleston WV 145.4300
8550AA8CC Buckhannon WV
Um Folks...
If "WE" are Ham Radio Operators then why are not
using NTS to send RADIOGRAMS?
There are 35 hams in Philippi WV including KC8VKZ.
I believe the best message to send (per the ARRL at
http://www.arrl.org/FandES/field/forms/fsd3.html )
would be: "ARRL SIXTY EIGHT" via NTS.
Just anoth
will these two modes be available as stand alones or will they be only
for users of mix ?
it would not be good to have another mode on the air that is pay only
like pactor III.
david/wd4kpd
Yahoo! Groups Sponsor ~-->
Get fast access to y
just wondering if contestia/rttym will limited to mix users ?
if not, could use some links.
david/wd4kpd
Yahoo! Groups Sponsor ~-->
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/u8TY5A/tzNLAA/yQL
looking for digimode qso's
0500z to 0800z or a little later any day of the week except for wed/thurs.
160 thru 30m
if interested, please drop me an email [EMAIL PROTECTED]
david/wd4kpd
Yahoo! Groups Sponsor ~-->
Get fast access to your
, and you don't have to use qrp if
you don't want to. and of course any mode u run will be no wider than
ssb. somewhere around 1804/3582/7089 would probably acceptable.
david/wd4kpd looking to reply.
Yahoo! Groups Sponsor ~-->
Get f
t say ?
david/wd4kpd
Yahoo! Groups Sponsor ~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM
~
Here is the full message below:
on how to capture a radar image, I guess you would call it "slow scan" (that has no outputs) by placing a transmitting camera in front of the screen and sending live feed to a central point within a 25 mile range to be viewed. This would be a mobile/moving r
HAS THE LATEST HAMPAL/DRM BEEN CANCELLED ?
LOOKING FOR NEWEST, AND GETTING BROKEN LINK.
DAVID/WD4KPD
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/digitalradio/
thout government intervention? Certainly!. I for one am glad
that we have such brilliant people working on these issues and the
discussions on this reflector certainly bring out the best in current and
future technologies. I have enjoyed and will continue to enjoy these
discussions.
73 to all,
wonderful for those that must have this type of system I now feel that
those of us that just play with AIRMAIL are creating traffic that is not
appropriate for general amateur communication.
73 to all
de David
David H. Walker K0COP
422 South Boundary Ave. SW
Aiken, SC 29801
Home: 803 648 2921
call went thru a
timeout and stopped. no errors were given.
david/wd4kpd
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/digitalradio/
<*> To unsubscribe fro
I DID !
said it couldnt find the needed module. i have another standard knoppix
live cd, and it works ok in english. it was a problem only with the AFU
version.
david/wd4kpd
Chuck Mayfield wrote:
>At 12:25 PM 2/21/2005, you wrote:
>
>
>
>
>>anyone have a lin
tks jerryi have dl it already, but not made cd as yet. the AFU
version with Knoppix has many ham programs built in.
david/wd4kpd
Jerry Weihrauch wrote:
>
>
>David,
>Try:
>http://csociety-ftp.ecn.purdue.edu/pub/knoppix/KNOPPIX_V3.7-2004-12-08-EN.iso
>
>If the iso
thank you very much Harv...
vry new to linux, and havent installed anything to HD yet. have tried
the afu/knoppix, mandrake,and suse live cd's.
only knoppix seems to work, except for the AFU version only plays in German.
is what you are offering similar? cant do much on HD as yet.
anyone have a link for download of the Knoppix live cd with the ham
programs built in that is in English ?
have the German version, but no fun to play with.
david/wd4kpd
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/
http://dxcluster.blogspot.com";
when transmitting, the typed text that is echoed in the rx
> window becomes garbled ?
>
>
> i noticed these operations today. i reloaded / setup the software,
> and everything ok for awhile...now is acting the same again.
>
> XP PRO SP2 PLENTY OF CPU/MEM.
>
>
201 - 286 of 286 matches
Mail list logo
