> What's the status with version 7?
Close to final.
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
I can open SS, it has indexed all my cd's/songs.
I did a clean reinstall of win xp sp2.
When I try to open softsqueeze internally all i get is nothing. The
player is just black. When I open it externally all i get is "Trying to
connect to slimserver"
Is there some security settings in SS which mig
meep wrote:
> And then there's this apporach;
>
> I have a similar star configuration with all my speaker cables running
> back to a single point. This point is adjacent to my structured wiring
> panels, network hubs etc. Essentially, everything terminates proximate
> to each other in my attic.
>
>
Michael: happy to help if I can. I'm running a windows xp machine,
service pack 2, 2.4 GHz, 512 RAM with a swap file size of 1536 MB.
I've been running Webroot Spysweeper and NOD32 antivirus for several
years now. Other than that, pretty vanilla. Belkin Pre-N wireless
router has been running
> - initial scan was 2+ hours (1600+ albums, 20,000+ songs, 1,500+
> artisits, 160GB of disk space on an internal hard drive)
Is this slower than it was before? Are you using MusicIP or iTunes? When
looking at the scanning status page, where's most of the time spent?
> - screen "refresh" was l
I hope some of the developers can look into this. I bought my new SB3
just to be able to adopt WOL on my server (before I had a SB1 and
SB2)... :(
--
gorman
gorman's Profile: http://forums.slimdevices.com/member.php?userid
>> - screen "refresh" was labored and delayed
> Player screen or web interface?
Hi Michael, I've been meaning to say for a while, I find the new web
interface incredibly slow.
I'm running from SVN on Windows XP, Firefox 2.
Firstly, It takes almost a minute to fully load.
Secondly, I have observ
peejay;249735 Wrote:
> Questions:
> 1. How are the Logitech speakers connected to the squeezebox? Via the
> RCA outlets at the back, or the headphone socket - the latter is not
> recommended
> 2. You mention 3 other units, do all units go silent at one time?
> 3. Have you adjusted the volume
I have tried running sync on 6.5.4 loaded to my PC (rather than QNAP)
but the results are the same. Havnt tried SC7 yet but will it make any
difference? I am beginning to wish I hadnt bothered buying the active
speakers (or more accurately done some more research upfront - I
thought sync was a sta
I've been running SC7 for some time now, and haven't noticed any speed
differences between SC7 and SC6.5.
That's not to say that there aren't speed differences - but in my
experience any difference isn't significant enough to be noticed in
every-day use.
A complete rescan still takes a while, bu
Craig, James \(IT\);249801 Wrote:
>
> Hi Michael, I've been meaning to say for a while, I find the new web
> interface incredibly slow.
> I'm running from SVN on Windows XP, Firefox 2.
>
> Firstly, It takes almost a minute to fully load.
> Secondly, I have observed that if I open two tabs in F
Well the SB2 and SB3 internals are basically the same, so the real
question is how well have people done with sync on the SB1. I did use
to have one and it generally worked but did have problems. Remember
that the SB1 is MUCH more sensitive to wireless problems than the SB2/3
and when synced that
I have recently moved from running Slimserver on a Buffalo Linkstation
(successfully working for 12 months) to running it on my PC (Vista
o/s). Slimserver 6.5.4 and 6.5.5 have been stable and performance
excellent but when I install SqueezeCenter 7 it installs the software
but never goes past the
> excellent but when I install SqueezeCenter 7 it installs the software
> but never goes past the 'loading' SqueezeCentre prompt.
Where do you see this "loading" message? Do you see any SC related messages in
the Windows event viewer?
___
discuss maili
>> Firstly, It takes almost a minute to fully load.
>Are you running short on memory? What's the machine's specs?
It's a 2Ghz P4 with 1Gb of memory. SqueezeCentre is running on the same
machine.
I think there is plenty of memory, about 600Mb in use normally.
>> Firefox uses 100% CPU time. Switch
> Another unrelated New Default comment: especially on short item names,
> there's a lot of blank horizontal space between item name and the small
> Add/Play/etc. icons. It's sometimes a hassle to mouseover the item and
> then slide right to the icon -- it's easiest to select an item by
What proba
> Hi Michael, I've been meaning to say for a while, I find the new web
> interface incredibly slow.
You're late in the game to expect major changes...
> Firstly, It takes almost a minute to fully load.
Are you running short on memory? What's the machine's specs?
> Secondly, I have observed that
thanks radish, I may as well give SC7 a try. Incidentally I've found SB3
to be no better than SB1 regards wireless stability (ie my SB1 is fairly
solid). Anyone out there got a SB1 sync'd with a SB2/3?
--
thefunk
thefunk's
thefunk;249824 Wrote:
> thanks radish, I may as well give SC7 a try. Incidentally I've found SB3
> to be no better than SB1 regards wireless stability (ie my SB1 is fairly
> solid). Anyone out there got a SB1 sync'd with a SB2/3?
If you are only streaming mp3s you would not see much difference i
well i'm very confused now since SB3 seems to be the weak link!! Loaded
SC7 and sync'd both SBs. Both started playing (SB1 wireless strength
30% & SB3 68%) for approx 30-50secs then SB3 stops playing and starts
re-buffering. Manage to restart but then them almost immediately SB3
re-buffers again.
Thanks -- I didn't see that plugin in the official plugins list, but now
I've found it and installed it.
So far I can't get it to work in "off" mode without prominently
displaying the "Nothing" that's currently playing. But assuming I get
over that hurdle, how would one go about creating custom f
I am aware of that!
I'm presently building a garage with loft that's going to be my home
office. This is seperated from the main house and I'm not running
speaker cable to it. I'll be purchasing a Squeezebox for aural
entertainment there -(and to ease my guilty conscience!)
Peter
--
meep
Hi Geir.
>From your name I guess you are Norwegian. I am sitting in Oslo with the
same problem, only on a new aquired IMac. I have an old Squeezebox wired
and a new on WLAN, and both boxes gives me "lost contact with
slimserver"
I have worked the IMAC over for several hours, particularly to get
bflatmajor;249709 Wrote:
> No.. After updating my router's firmware, I NEVER had to go into the
> router's settings to reinstate previous changes.
> But that question is best left up to linksys tech support.
>
> If this was happening to me, I would also call your DSL tech support.
> They may ha
aroide;186013 Wrote:
> I have around 400 CDs shared via slimserver. That's too many for me to
> remember even what I own. I want to print lists by Album and Artist to
> have as a cheat sheet in my living room to refer to.
>
> the web interface is clunky for this and I haven't found a plugin th
Yes Erik, I am a norwegian as well, sitting in Oslo/Smestad.
I have been able to get Softsqueeze up internally, but not even that is
able to connect to Slimservice as all I get is:Trying to connect. I am
doing a clean install now, and keeping my fingers crossed.
But if anyone knows/can make a vali
Server (PC) wakes fine for me.
It will wake and run for 2-3 sessions and then SC7 service dies.
--
mswlogo
Thinkpad XP SS > Cat5 > SB3 > SPDIF-COAX > Meridian 861V4 (Trifield,
Room corrected, Upsampled) > DSP5500 Mains, DSP5500HC Center, DSP33
Rears
---
I had version 6 working fairly stable for about a year with a server
that sleeps when not being used (XP SP1 Laptop).
I have tried several builds with SC7 and it works for a couple boots
and then craps out.
The PC boots but SC7 service dies.
I have not tried another build in a couple weeks.
Is
Michael Herger;249814 Wrote:
> >
>
> That's not something you should see (at least I don't). Do you have any
> FF extensions installed? Eg. Firebug is known to slow it down to a crawl
> (but I couldn't do without :-/).
>
> Michael
me too Firebug can cause problems for certain sites, local or
o
So what are the benefits of 7 over 6.4.5.
A list of +/- would be very useful.
Joel
--
jmschnur
Joel
jmschnur's Profile: http://forums.slimdevices.com/member.php?userid=8604
View this thread: http://forums.slimdevices.co
can anyone help with a sql error that is thrown when scanning...?
I'm currently running 6.5.5I upgraded to see if it fixed this
problem which started in 6.5.4 The scan populates the DB with most of
the files...but no artwork...it appears that is has something to do
with compiling the "variou
jmschnur;249929 Wrote:
> So what are the benefits of 7 over 6.4.5.
>
> A list of +/- would be very useful.
>
> Joel
The changelog is here:
http://svn.slimdevices.com/*checkout*/trunk/server/Changelog7.html
At the moment, I can't really think of any negative things. I
personally don't like all
-DBD::mysql::st execute failed: Can't create/write to file
'C:\WINDOWS\TEMP\#sql_768_0.MYI' (Errcode: 13) at C:\Program
Files\SlimServer\server\CPAN/DBIx/Class/Storage/DBI.pm line 771-
This error normally means that your onaccess virus scanner is
preventing MySql from writing to a temp file. Can
Perhaps not what you are looking for, but this is the SqueezeCenter7
Spec document from the Wiki
http://wiki.slimdevices.com/index.cgi?SlimServer7Spec
--
funkstar
funkstar's Profile: http://forums.slimdevices.com/member.p
I am ready to run whatever diagnostics tools are required to understand
what's going on. Computers don't work by magic (packets)...
--
gorman
gorman's Profile: http://forums.slimdevices.com/member.php?userid=56
View this t
See http://wiki.slimdevices.com/index.cgi?NetworkProblemsSecondGuide
DD-WRT may or may not help your problem but apparently it can be
installed even on the cut-down models.
http://www.dd-wrt.com/dd-wrtv2/downloads/stable/dd-wrt.v23%20SP2/hwsupport.txt
lists the older WRT54G v1 - v4 with identifi
bflatmajor and maggior, Thanks for the help on router firmware updating.
I did it and the router worked first try. I am glad I removed that
possible problem but I don't think that is the main issue.
I shut my modem off last night and took the router out of the loop.
This morning I started the m
Where is my hammer? The SB is supposed to be fun but all I have done
is fight with it. I love listening to net radio but have several things
I can't make work.
NOTE: All issues deal with internet radio. I am not trying to use the
SB as a music server for stored music.
I can't set favorites so
>
> I don't get why there is both a SqueezeNetwork and SlimServer but at
> least I have figured out where I need to be to do certain things.
>
Simplistic answer.
Squeezenetwork does not need your PC running so it is only used for
Internet Radio and network services such as MP3Tunes, Pandora etc
erland wrote:
> At the moment, I can't really think of any negative things. I
> personally don't like all the skin changes in the classic skin and in
> the new default skin, but that's just a matter of taste because other
> people loves them. Overall I would still say that the skin changes is
> an
and I was hoping for drag and drop within a playlist
How about drag and drop from the left panel/screen into a playlist? Is
that possible?
I haven't played with 7.0 and I'm currently running the latest version
6.5.??
TIA
--
bflatmajor
Hi Folks,
I'm a little sad tonight - I hope someone has some insight. I wanted to
try out the Power Switch II plugin since I'd like to use it to switch my
amps on/off. I haven't built the relay board yet, but I installed the
plugin and wanted to make sure it was working (ie, outputting 3.x volts
I uninstalled 6.5.4 and installed 6.5.2 and it works perfectly. I am
going to let it run for a few days to ensure that all is stable. If
pressing "Click here to download" to update to 6.5.4 within slim server
messes me up again, then I will have something more meaningful to
report.
The problem
bflatmajor;249989 Wrote:
> and I was hoping for drag and drop within a playlist
>
> How about drag and drop from the left panel/screen into a playlist? Is
> that possible?
>
Drag&drop within the current playlist works in both Fishbone and
Default skin in 7.0, the classic skin(called default in
X-10 hardware is cheap. It's clunky. It's loud. But if you need
something like PowerSwitch and your headphone outs are toast, look at
my BottleRocket plugin.
Oh, yeah, if you have a Windows system it can support Insteon, which is
more expensive, reliable, and nicer than X-10.
Good luck.
--
pe
Happy listening!
.
--
haunyack
haunyack's Profile: http://forums.slimdevices.com/member.php?userid=9721
View this thread: http://forums.slimdevices.com/showthread.php?t=41091
_
> Agreed. I like the new default skin quite a lot. The only thing that
> it seems to be really missing is drag-and-drop playlist reordering.
d'n'd in Default currently is available for playlist (current & saved) and
favorites reordering.
___
discuss
Hi guys, I had very good advice from a number of contributors here a few
weeks ago and bought a number of SB3's and a Windows Home Server
Tranquil T7.
I set the first room up with a T amp and some Tangent Evo speakers on
Saturday but have been beset by problems with songs stopping at random
(they
48 matches
Mail list logo
