Jack - good evening (or maybe good morning!). Great info and thanks for the
quick response. I have my setup exactly as in Fred Cady's KX3 book, towards the
end of the book. He has a great diagram showing how to run a KPA500 from a K3
or KX3. Do you have his book? If not I'll respond and tell you
The KPA500 is my work, so I’ll try to answer…
See discussion below.
> On Dec 24, 2014, at 9:22 PM, James Bennett wrote:
>
> First, let me wish all a very Merry Christmas!
And from the W6FB family as well!
> OK, now the problem. I have a KX3 and the full K-line: K3, P3, KPA500, and
> KAT500. I
This message may be a duplicate for some of you as
it's being sent using several of our mailing lists.
Most of you are aware that Rose has been treated for
uterine cancer for the last seven months. This has
included both chemotherapy and internal vaginal
radiation.
What makes this an especially
First, let me wish all a very Merry Christmas!
OK, now the problem. I have a KX3 and the full K-line: K3, P3, KPA500, and
KAT500. I have a two position coax switch that I use to drive the amp with
either the K3 or the KX3. When using the K3 (P3 powered off) all works
perfectly. I can change ban
On Wed,12/24/2014 2:46 PM, VE3NFK wrote:
Hi Jim
Thanks for the information - possibly you might suggest what the end user
might do to fix the KX3 pin 1 problems on the other connectors?
There's probably not an easy way to fix it -- it's established by how
the radio is built, and changing wou
Bump on this. Just checked and p3s0116 is still the most recent release
for the P3 SVGA.
Tighe
NK4I
On 6/2/14 1:56 PM, Sam Morgan wrote:
SVGA Latest Production Release (MCU 1.16) February 27, 2013
any chance of the beta's being released to the masses?
I know p3s0119 already addresses the w
Here is the net report for the Elecraft SSB net from December 14, 2014. We had
28 participants.
Station NameQTH Rig S/N
NC0JW Jim CO KX3 1356
KF5YBE Lee TX
Happy Holidays to all the elves at Elvecraft! 8-)
Bruce N1RX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted b
It has been awhile since I have worked with the NEC but things haven't
changed that much for single phase. It has never been allowed for the
green/yellow lead to carry load current. Green and neutral must be the same
size as the current carrier even on a 240 circuit. Green and neutral may not
be ci
Hi Jim
Thanks for the information - possibly you might suggest what the end user
might do to fix the KX3 pin 1 problems on the other connectors?
thanks and Merry Christmas
73 John VE3NFK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Elecraft-KX3-IQ-out-and-spectral-d
Electric ranges used to have a 110 VAC outlet in which the ground and
neutral were wired together. (The 220V plug had only three prongs.) I
always wondered how they got away with that.
Alan N1AL
On 12/24/2014 01:50 PM, Jim Brown wrote:
On Wed,12/24/2014 11:41 AM, Charlie T, K3ICH wrote:
A
On Wed,12/24/2014 11:41 AM, Charlie T, K3ICH wrote:
A lot of the older amps (Thunderbolt for example) had 120 V fans wired
from one hot to ground. I always wondered about that.
I think that used to be legal, but it is no longer, and it's very bad
practice.
The better ones (Ten Tec Titan, fo
Don:
I just removed the mic cover from the Heil Proset and can confirm that the mic
cartridge is labeled HC-4.
Merry Christmas to All,
Barry, WD4ASW
> On Dec 24, 2014, at 1:58 PM, Don Wilhelm wrote:
>
> Barry specifically said HC4/HC5 elements, and those are definitely dynamic
> elements.
On Wed, Dec 24, 2014 at 2:13 PM, Phil Kane wrote:
>
> On 12/24/2014 10:39 AM, Jim Brown wrote:
>
> > Installing a 240V outlet is not a big deal unless the construction of
> > your home makes it difficult to run the cable. Barring that, a competent
> > electrician should be able to do that in a hal
On Dec 24, 2014, at 1:26 PM, Edward R Cole wrote:
-
Why is this a problem? Just run down to Home Depot or Lowe's and
buy some No.8-3 cable and run your own 220v line. They have the
needed twist-lock 25A or 30A receptacles, plugs, and utility boxes.
I tied my 35-foot 240vac exten
Put them in an enclosed (fan cooled) box with a 6AQ5 mounted on top.
And I have YET to have my afternoon egg nog ( Turkey Hill w/ Jack Daniels).
OOO Yeah.
73 es 58 Chas
- Original Message -
From: "Eric Swartz - WA6HHQ, Elecraft"
To: "Phil Hystad" ; "N2TK, Tony"
Cc: "Elecraft R
On 12/24/2014 10:39 AM, Jim Brown wrote:
> Installing a 240V outlet is not a big deal unless the construction of
> your home makes it difficult to run the cable. Barring that, a competent
> electrician should be able to do that in a half day; a difficult run
> could double the work. All that is re
Or some really good eggnog is being passed around ;) <<<
Hey Bryon, don't be selfish. Who is it that got the Really Good EGGNOG passing
around?!!!
73 Milverton.
From: Byron N6NUL
To: "Eric Swartz - WA6HHQ, Elecraft"
Cc: Elecraft Reflector
Sent: Wednesday, December 24, 20
Barry specifically said HC4/HC5 elements, and those are definitely
dynamic elements.
73,
Don W3FPR
On 12/24/2014 12:39 PM, Hisashi T Fujinaka wrote:
I replied directly to Barry, but I'm fairly certain the Heil element is
NOT dynamic and needs bias.
There's a jumper AND the menu setting. I for
HTML clipboard
Elecraft's Offices will close today, Wed., Dec 24th, at 12 noon PST (2000 UTC)
for the Holidays.
We will also be closed this Thursday and Friday, Dec. 25-26, and we will return
to work on Monday Dec 29th.
Our Secure Web Order Form will still be active during the holiday.
Please
Installing a 240V outlet is not a big deal unless the construction of
your home makes it difficult to run the cable. Barring that, a competent
electrician should be able to do that in a half day; a difficult run
could double the work. All that is required is a pair plus a Green wire.
If you als
From: "Larry - K1UO"
Just buy their new kpa ?COMBINER? and add a second KPA500 and you got
your KPA1000! Merry Christmas I say...
--
Does this "really" exist from Elecraft? Sound's like wishful
thinking. Of course one make both input divider and output combiner. ~KL7UW
--
From: Ray
Me thinkst those are not sugar plums dancing around in our heads.
Time to work on wrapping presents and play family guy (pun intended).
Everyone have a Merry Christmas and a Happy Holiday.
N2TK, Tony
-Original Message-
From: Byron N6NUL [mailto:by...@n6nul.org]
Sent: Wednesday, December 2
Maybe just some good scotch. ...why ruin it with eggnog
Sent from my Verizon Wireless 4G LTE smartphone
Original message From: Byron N6NUL
Date:12/24/2014 1:02 PM (GMT-05:00)
To: "Eric Swartz - WA6HHQ, Elecraft"
Cc: Elecraft Reflector
Subject: Re: [Elecraft] KPA1000
Or
Or some really good eggnog is being passed around ;)
73, Byron N6NUL
> On Dec 24, 2014, at 09:25, Eric Swartz - WA6HHQ, Elecraft
> wrote:
>
> Must be a slow news day!
>
> Eric
> elecraft.com
>
>> On 12/24/2014 9:14 AM, Phil Hystad wrote:
>> I think a good hamfest Elecraft demo would be 8 KPA
I ran into this years ago it turned out to be the Plug and not the jack.
a simple fix is to wrap a piece of fine sandpaper (600+ grit) and wrap it
around the plug and twist.
Some plugs seem to have a slight film on them ant this removes it
From: W2BLC
To: elecraft@mailman.qth.net
Sent
I replied directly to Barry, but I'm fairly certain the Heil element is
NOT dynamic and needs bias.
There's a jumper AND the menu setting. I forget what the defaults are
because I played with both to get this exact setup to work.
On Wed, 24 Dec 2014, Don Wilhelm wrote:
Barry,
I cannot comment
No, I really hate eggnog. But, I think I have had one too many cups of coffee
this morning. Plus, spending time to derive the Dirac Equation just for the
fun of it. Thus, thinking in terms of infinite dimensional Hilbert Spaces and
convergence. Thus, the total output power possible of N KPA
Barry,
I cannot comment on the RemoteRig setup because I do not have any
experience with it.
There are some statements that may require clarification - I think the
Heil document is somewhat confusing.
1) For a dynamic microphone, turn bias off.
2) The K3 (and K3/0 and mini) can turn bias on
When I bought this property, it was a AM broadcast station, it had a
couple Harris
transmitters, one had 52 - 1 KW "amps" in it for 50KW worth of power,
Floor to ceiling stacks of KPA500s would work, but I also had 600 amp
440 3 phase
power lines.
73 Merv K9FD/KH6
I think a good hamfest
Hey, Phil -- sounds like you've already started on
the eggnog :-)
Merry Christmas!
Phil W7OX
On 12/24/14 9:14 AM, Phil Hystad wrote:
I think a good hamfest Elecraft demo would be 8 KPA500s combined together with
multiple (and some big) combiners/splitters. Or, maybe 16 or 32 KPA500s.
On
The need for 220 VAC is a very good point, Ray.
Operating from 110 VAC has always been a
constraint for me, and likely for many of us. Of
course, I'm less "serious" than some hams -- and
since the mid 90s QRP has been a focus of mine.
I sure do like having the KPA/KAT500 duo and the
ability
Must be a slow news day!
Eric
elecraft.com
On 12/24/2014 9:14 AM, Phil Hystad wrote:
I think a good hamfest Elecraft demo would be 8 KPA500s combined together with
multiple (and some big) combiners/splitters. Or, maybe 16 or 32 KPA500s.
On Dec 24, 2014, at 8:33 AM, N2TK, Tony wrote:
And
I think a good hamfest Elecraft demo would be 8 KPA500s combined together with
multiple (and some big) combiners/splitters. Or, maybe 16 or 32 KPA500s.
> On Dec 24, 2014, at 8:33 AM, N2TK, Tony wrote:
>
> And Larry, will the combiner handle two or three KPA500's? :-)
> Merry Christmas
> N2TK,
Sure, you can run a 1KW room heater from 110V... so what if the line
voltage sags to 100V on that circuit.. the heater will just deliver a
bit less heat.
If the voltage sags to 100V you are likely to cause a serious fire.
A 1 KW heater will draw roughly 10A ... 10A at 20 to 25V (the drop
in th
And Larry, will the combiner handle two or three KPA500's? :-)
Merry Christmas
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Larry -
K1UO
Sent: Wednesday, December 24, 2014 10:16 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] KPA100
Another consideration for a KPA1000, would be the almost certain need
for 220V power. Fine and dandy if it's already in the shack, but
certainly an extra cost. Sure, you can run a 1KW room heater from
110V... so what if the line voltage sags to 100V on that circuit.. the
heater will just
Hi Alan / N1AL and all
> In AM mode, the bandwidth is mirrored about the carrier frequency.
The bandwidth is not mirrored about the carrier freq displayed in PX3.
In NORM setting(Low=0.0, Hi=3.0), the PX3 bandwidth is as follows(where C is
center):
_==C==__
When I set
On Dec 23, 2014, at 7:15 PM, KG5EJU wrote:
> Very new to Elecraft, just own a W2, but looking long at the KPA500. Heard a
> couple rumors that a 1000 Watt unit was coming….
Not. Keep those ideas coming :)
73,
Wayne
N6KR
Just buy their new kpa ‘COMBINER’ and add a second KPA500 and you got you
I think this condition occurs because, in my case, I am running quite high
power, and it occurs if I slip back to receive while still talking. That is,
being a little too quick to return to receive. I had the problem with my
previous XV144 too. I have carried out the Q7 0.1uF capacitor mod as
recom
On 12/24/2014 4:26 AM, Mike K2MK wrote:
Hi John,
Are you sure your external speaker is plugged in to the speaker jack and not
the rear headphone jack?
73,
Mike K2MK
John McBee-2 wrote
Problem still exist, however I have discovered that if I turn on spkr+ph
to on, I have audio fine without he
Remove the adapter, plug in the headset to the rear connectors, select the
MAIN:MIC SEL menu, press [1], press [2] and you're almost done. (Mic rear panel,
Low Z, Bias On)
Now, you need to set the equalization. I get unsolicited good audio reports
with the following:
Band 1: -16
Band 2: -10
Bruce,
Unless Heil has changed the Kenwood adapter, it should work fine.
Test your adapter - put a bare stereo plug into the adapter and use your
DMM. Pin 1 should connect to the tip of the stereo plug. The shell of
the stereo plug should connect to either pin 7 or pin 8 (or both) and
the ri
I am not. Do I need to, it seems very cumbersome to have it connected, plus
the batteries would go dead over time.
However, in the MENU, I have set:
rP.L bIAS
73 de Bruce, N7TY
White Plains, MD
-Original Message-
From: Jorge Diez - CX6VM [mailto:cx6vm.jo...@gmail.com]
Sent: Wednesday
Bruce
Are you using the BIAS box to connect it in the front?
Is a small black box with, I think, 2 x AAA batteries
73,
Jorge
CX6VM/CW5W
-Mensaje original-
De: Elecraft [mailto:elecraft-boun...@mailman.qth.net] En nombre de Bruce &
Gab
Enviado el: miércoles, 24 de diciembre de 2014 08:37
Recently purchased a Yamaha CM500 headset with a Heil AD-1-K headset adaptor
for Kenwood (the red one). I love the headset, much cheaper than the Heil
and performs about the same, IMHO.
The only way I managed to get the mic to work was through the rear jack
(yes, the mic was selected to front pan
Hi John,
Are you sure your external speaker is plugged in to the speaker jack and not
the rear headphone jack?
73,
Mike K2MK
John McBee-2 wrote
> Problem still exist, however I have discovered that if I turn on spkr+ph
> to on, I have audio fine without headphones plugged in, but if I change
47 matches
Mail list logo