ne element that is a half wave long.
--
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-ARCI # 12647
AZ ScQRPions
COGRC Emergency Communications
Rick Dettinger wrote:
=
It is an antenna and a good one,
"The proof of this - you would never dream of putting up half of
a dipole. Hi Hi"
Sure. It's called an End Fed Half Wave dipole. Oh, but to some, that's not an
antenna.
--
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC
trivial. Don't get me wrong, I
think HRD/DM780 is the best "one stop" solution for logging, rig control,
digital work on the market today, and the price is right, FREE, but the Morse
code decoding needs some work.
Simon has a real love for amateur radio to put so much time into a
I'm getting ready to build my W1 SWR/Watt meter. Before I start, are things
I should consider. Enclosure? Mounting BNC off-board? External power?
COM port mounting?
Inquiring minds want to know.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 29
witch.
After replacing K12, my next project on the K2 is to install the KAF2 audio
filter board. Then I will have all options except the KPA/100, DSP and 60m
modules. I guess at some point I should upgrade S/N 0539 to Revision B.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K
same RX results on the receive ANT.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-ARCI # 12647
AZ ScQRPions
COGRC Emergency Communications
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED
mething dealing with 40m receive. It is so bad I can't
even hear the local oscillator around 7000 KHz with the pre-amp on. There
is no CW or SSB receive.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-
hams willing to part with a major
chunk of change for a K3, but I'm priced out of the market. I hope they
continue their great success. Oh, and the Elecraft amplifiers are also out
of the question pricewise, too.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
r for help support
is no one thinks less of you for needing help and asking for it.
--
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-ARCI # 12647
AZ ScQRPions
COGRC Emergency Communications
Ron D'Eau
bly manual for a large model rocket kit and it has
taken me over 6 months and several revisions to date.
--
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-ARCI # 12647
AZ ScQRPions
COGRC Emergency Communications
g friends
on CW.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD # 128
QRP-ARCI # 12647
AZ ScQRPions
COGRC Emergency Communications-
Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Win
craft Forever! K2 Mojo, the real deal.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Cenution
Goody K3NG <[EMAIL PROTECTED]> wrote:
=
I was away from this reflector for several years after I built my K1
(#505), just due to email volume and other things going on. I returne
s, families, and lives on the line
to start a small business?
If I have to tell you the answer, here's your sign.
Let Elecraft do what it does best, design, produce and distribute the finest
amateur radios in this niche hobby.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Pro
uncontrolled (accessible by the average
person). Accessible means can they get near the radiating portion of the
antenna.
I have a Cushcraft R-7000 vertical mounted 8 feet above ground in an area of
my lot that is fenced and locked (controlled area).
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC
about winning or placing, it is about
having fun, making contacts, and meeting new friends. So if you ever hear
me calling CQ FISTS or CQ SKCC or CQ SKS, do not hesitate to call me.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
QRP
Kevin,
Any you thought we could not hear you because of band conditions? The secret
is out now, you don't even like the code you send. hi hi.
73
Mark, KJ7BS
Glendale, AZ
Edtior, The SKCC Centurion
Elecraft K2 # 00539
FISTS -- SKCC -- QRP-ARCI -- etc., etc., etc., blah, blah blah
ted on the rework eliminator.
K2 Rework eliminator http://www.unpcbs.com/
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56
QRP-ARCI # 12647
AZ ScQRPions
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Beha
No shame Ed. We all learned something today.
Thank you for sharing.
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
[EMAIL PROTECTED] wrote:
=
Well Bill, remember that word ASSUME? If you ASSUME you make an ASS out of
U and ME?
After Don's reply I checked theba
Does anyone have this book that I can borrow?
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
K2 # 0539
FISTS # 2972 cc 1806
SKCC # 2240 C56
ARCI # 12647
AZ ScQRPion
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be
I did not hear either net tonight from Arizona.
Mark, KJ7BS
Glendale, AZ
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240
QRP-ARCI # 12647
AZ ScQRPions
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock
Sent: Sunday, February 04, 2007 9:07
, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Don (W3FPR), Tom (N0SS), Don (N4HH), Gregg(W9DHI),
Thanks for the reply about constructing the special "Y" cable and information
that the signals are separate and will not conflict. Looks like Santa will be
visiting the Elecraft store.
Mark, KJ7BS
Glendale, AZ
> -Ori
I read where the KAT100 requires the KIO2 module to control the auto tuner,
which I have. How do I connect the KAT100 to the K2 and still use the KIO2 for
rig control?
--
Mark, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft
0500z. Saturday was
much less active when I had operating time and Sunday I managed only 2 QSOs.
In total I had 41 QSOs for a total of 2700 points, all working CW at 5w from my
K2.
--
Mark, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to
Some time back I saw a K2 with a carry handle mounted on the right side.
Does anyone remember this? If you have a carry handle on your K2, I'd be
glad to hear from you and receive pictures.
Mark, KJ7BS
Glendale, AZ
K2 # 0539
FISTS # 2972 cc 1806
SKCC # 2240
ARCI # 12647
AZ ScQ
ives.
'Never in the history of man, have so few done so much with so little.'
Elecraft reigns supreme.
Mark, KJ7BS
Glendale, AZ
K2 # 0539
FISTS # 2972 CC 1806
SKCC # 2240
ARCI # 12647
AZ ScQRPion
Lloyd Lachow <[EMAIL PROTECTED]> wrote:
=
Gosh...I used to be moti
ot running conputer control?
Mark, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinf
not Earth-directed. Future
eruptions could be, however, because the Sun's spin is turning the spot toward
Earth. Sunspot 929 will be visible for the next two weeks as it glides across
the solar disk.
Please visit http://spaceweather.com for more information and updates.
--
Mark, KJ7
for $20.
The links to Bob's preamp kit are not valid. Maybe someone else knows how to
reach Bob.
Mark, KJ7BS
Glendale, AZ
Bill Acito <[EMAIL PROTECTED]> wrote:
=
I was finally able to get my K2 (#0061) upgraded to a K2/100 just prior to
CQWW this past weekend.
I listened and searched, but heard nothing in Glendale, AZ.
Mark, KJ7BS
Glendale, AZ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock
Sent: Sunday, October 29, 2006 9:10 PM
To: Elecraft
Subject: [Elecraft] Elecraft CW Net Report for October
I finally heard KJ7?. I shot back my call twice
and was rewarded with KJ7BS TU 559 559 BK. It was so natural, my exchange,
ES1QD TU 599 599 OP MARK MARK QTH QTH AZ AZ 5W 5W QRP QRP. He acknowledged
my 5W QRP and sent 73 DE ES1QD TU.
I just worked Estonia on 40m with 5w from my K2 and received
Remember, the KIO2 does not use an RS-232 cable! The KIO2 requires a special
cable for computer control.
Mark Saunders, KJ7BS
Glendale, AZ
K2 S/N 0539
Per Enocson <[EMAIL PROTECTED]> wrote:
=
Back from my summer vacation, my K2/100 and PC donĀ“t get along a
Found this on Yahoo's News repository today.
http://news.yahoo.com/s/space/20060821/sc_space/sunsnextstormycyclestarts
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to po
display on Ham Radio
Deluxe change as I rotated the VFO dial and changed bands. I know this is
going to be an excellent accessory for my K2.
This included the MPU v2.04 upgrade.
It looks like Elecraft makes another quality kit.
THANKS ELECRAFT!
Mark Saunders, KJ7BS
Glendale, AZ
was
an Extra class operator. That made an impression on me and to this day I do my
best to "pay it forward" when I hear the slow unsteady fist of a new CW op.
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft
Keep an eye on this one. Undetectable Radar! The inventor says it sounds like
static on a receiver.
http://tinyurl.com/nf7aq
BTW: It is an interesting end to the URL the TinyURL generated for this link.
___
Elecraft mailing list
Post to: Elecraft@m
est in the next few weeks.
Mark Saunders, KJ7BS
Glendale, AZ
"Stephen W. Kercel" <[EMAIL PROTECTED]> wrote:
=
Fellow Elecrafters:
At the KS1R Field Day operation we had a bunch of 5 wpm operators who
wanted to try their hand at CW on our GOTA station. They were
I've located the parts I need (thanks Ron).
Thank you to everyone who responded to my query for parts. This is truely a
great list.
I hope I can return the favor some day.
Mark Saunders, KJ7BS
Gelndale, AZ
"Mark Saunders wrote:
=
I am in need of a few 1N34A
I am in need of a few 1N34A diodes and about 3 feet of RG-174 coax. Does
anyone on the board have these that I may purchase?
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
eyes.
The K2 front pannel is easily remoted and I've seen a few K2s mobile with the
front remoted. Very slick.
Now if I can only get my K2 transmitting again, I would be in business.
Mark Saunders, KJ7BS
Glendale, AZ
Ron D'Eau Claire <[EMAIL PROTECTED]> wrote:
=
Holy CW! That's the fastest I've ever sold anything.
My AZ ScQRPions Paddle kit has been sold.
Mark Saunders, KJ7BS
Glendale, AZ
From: Mark Saunders, KJ7BS [mailto:[EMAIL PROTECTED]
Sent: Friday, April 14, 2006 6:30 PM
To: Az Ham;
t has been opened to
check for parts, but nothing done with the kit. Price: $30 plus $3
shipping.
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
Ok, I've read about the PAC-12 antenna and I'm almost convinced to get/build
one.
It's a short vertical, right?
What is its performance?
It's got to be a compromise, right?
Would a larger coil diameter with wider spacing between the winds improve
performance?
Mark Saun
ideas where to start?
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
I was shopping Mouser for components for a project. I noticed the SMD devices
I need are "Lead Free". Will I have any trouble soldering these components
with Tin/Lead solder?
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing li
With a callsign like that, no wonder. Just kidding! That statement is more
appropriate for my callsign.
Mark Saunders, KJ7BS
Glendale, AZ
From: Bob Baxter <[EMAIL PROTECTED]>
Date: 2005/12/21 Wed AM 09:40:19 EST
To: El
floor.
Mark Saunders, KJ7BS
Glendale, AZ
From: Tom Hammond <[EMAIL PROTECTED]>
Date: 2005/12/12 Mon AM 09:09:23 EST
To: elecraft@mailman.qth.net
Subject: [Elecraft] ECN 12-12-05 Report(s)
Hi Folks:
I called both of the Elecraft C
Kevin,
I hope and pray for you.
Mark Saunders, KJ7BS
Glendale, AZ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Rock
Sent: Saturday, December 10, 2005 10:04 PM
To: Elecraft
Subject: [Elecraft] Elecraft CW Net NO NET
I am sorry folks there
It is that blessed gigantic (gi-normus as my son would say) sunspot. I saw
the solar flux get over 100 the past few days. Ten meters was open most of
the weekend, too.
Mark Saunders, KJ7BS
Glendale, AZ
Elecraft K2 S/N 539
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
I realized that after seeing it in my in-box, "hey that looks like a callsign."
I should not have used all caps, sorry for the confusion.
Mark Saunders, KJ7BS
Glendale, AZ
From: James Kern <[EMAIL PROTECTED]>
Date: 2
"WONKY"... That is so funny. I've not heard that one for a while. I have a
list of interesting words I've heard people use in my lifetime. WONKY is near
the top.
Mark Saunders, KJ7BS
Glendale, AZ
From: "
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
tor as the Kenwood, so I thought this a good match. I've since
purchased a second Kenwood hand microphone, on eBay, so I have one for each
radio.
Mark Saunders, KJ7BS
Glendale, AZ
From: "Wayne Reed" <[EMAIL PROTECTED]
n.
AND THE #1 ITEM
1. Calling CQ SS and having a station respond with 'SEC?' to determine if
they want to work you.
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
s
2000 UTC
14.058
2300 UTC
7.058
Mark Saunders, KJ7BS
Glendale, AZ
<><><><><><><><><>
FISTS # 2972
Elecraft k2 S/n 539
<><><><><><><><><>
If it aint fun,
You aint doing it right.
AZ ScQRP
I checked in to the ECN today. Interesting! I will be checking in on a
weekly basis. CW speed was a little fast for me, but it gives me practice
to copy at higher speeds. My keying was not good today (some days I can't
send CW for my life) so I commend NCS for copying me.
Mark Saunders,
signals on 40, 30,
20, or 17 meters. Then a little before 0200 UTC signals started coming up.
Did we have another X class solar flare today?
Mark Saunders, KJ7BS
Glendale, AZ
<><><><><><><><><>
FISTS # 2972
Elecraft K2 S/N 539
<&g
That is interesting. Too bad he was right at my noise level and I don't
have my beam up yet.
Mark Saunders, KJ7BS
Glendale, AZ
-Original Message-
From: W7RY [mailto:[EMAIL PROTECTED]
Sent: Monday, September 26, 2005 7:56 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; ele
This evening I heard a station sending CW with an unusual call, RU3HD/ANT.
What is the /ANT?
Mark Saunders, KJ7BS
Glendale, AZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
60 matches
Mail list logo