hence why we haven't
heard about this before.
73,
Are - LB3SA
--
View this message in context:
http://n2.nabble.com/K3---intermittent-CW-chirp-tp2941027p3339777.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft
here.
73,
Are - LB3SA
AI9K wrote:
LB3SA wrote:
I'm sorry to hammer the board with all these messages but I found one
more criteria for the chirp to appear:
I have all 8 pole filters: 250Hz, 400Hz, 1.8kHz, 2.8kHz an 6.0kHz
installed in the main RX. I am not able to reproduce
chirp on all filter settings. I'm still not sure
if my particular 1.8kHz filter is partially defect or if only this
particular combination of settings causes it but Wayne is looking in to it.
73,
Are - LB3SA
Bill W4ZV wrote:
Did you try k3support at elecraft.com? For most K3 support issues
but the SHIFT control needs to be exact
at the 'problem FC' to cause the problem.
If you can't reproduce it with these exact settings, maybe try to vary the
sift control a few notches.
73,
Are - LB3SA
Check in with k3support. You may have recent firmware, but you also
need to run VCO CAL to take
at the 'problem FC' to cause the problem.
If you can't reproduce it with these exact settings, maybe try to vary the
sift control a few notches.
73,
Are - LB3SA
wayne burdick wrote:
Check in with k3support. You may have recent firmware, but you also
need to run VCO CAL to take advantage of the latest
I'm sorry to hammer the board with all these messages but I found one more
criteria for the chirp to appear:
I have all 8 pole filters: 250Hz, 400Hz, 1.8kHz, 2.8kHz an 6.0kHz installed
in the main RX. I am not able to reproduce the problem when WIDTH is set
from 400Hz or less. It's only from
no but
thought I'd ask in case someone has a creative solution to this.
73,
Are - LB3SA
--
View this message in context:
http://n2.nabble.com/K144XV---crossband-to-HF-tp3245290p3245290.html
Sent from the [K3] mailing list archive at Nabble.com
I have a K3 with almost all the options. I recently installed the KXV3. I'm
not sure if the problem started after doing this but I did receive my first
chirp report shortly after. The rig is almost a year old but has the newest
firmware.
It seems to happen when the shift filter is moved and
I have never in my 34 years as a ham used an external keyer and always used
either hand pump (old days) or built in keyer in my radios. But I keep
hearing folks using external keyers despite built in capabilities.
I am a CW enthusiast and over 95% of my Q's are CW. I do like using memories
but
I have a K3 with all modules except transverter interface. The radio does not
communicate with the PC (or Mac) before it has been on for about 45 minutes
- consistently. I turn on one of my rig control/logging programs or K3
utility right after the radio is turned on. Without touching anything
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the newest
firmware although it is 02.73.
Does anyone have a direct link to download 02.78?
--
View this message in context:
I found it... :blush:
LB3SA wrote:
With the 1.2.1.6 K3 Utility for OSX I get the message that I have the
newest firmware although it is 02.73.
Does anyone have a direct link to download 02.78?
--
View this message in context:
http://n2.nabble.com/K3-Beta-firmware-rev.-2.78%3A-%22Sign
-
From: elecraft-boun...@...
http://n2.nabble.com/user/SendEmail.jtp?type=nodenode=2164147i=0
[mailto:elecraft-boun...@...
http://n2.nabble.com/user/SendEmail.jtp?type=nodenode=2164147i=1 ] On
Behalf Of LB3SA
Sent: Thursday, January 15, 2009 9:53 AM
To: elecr...@...
http://n2.nabble.com
I just received and installed the KRX3 and KDVR3 today. Everything works
great except maybe one thing:
1) When I tap M1-M4 for playback of messages it goes to TX plays them. THis
is correct but it does not return to RX. Is this just the nature of the
beast?
2) when I record audio with the AF
Iain MacDonnell - N6ML wrote:
Are you running at least firmware version 2.72 on your K3?
No... I'm running 2.67. Just updated today. Is there a newer version than
what the K3 Utility installs when I click the Check Versions Now button?
But that would explain my problem
--
View this
Iain MacDonnell - N6ML wrote:
Yes, because it's in beta status - follow the instructions at:
http://www.elecraft.com/K3/k3_beta_release_instructions.htm
to install 2.73, which is the latest beta. 2.72 had significant
updates related to the operation of the DVR.
GL!
~Iain
I cannot seem to adjust the center freq. anymore for CW and data. I also lost
my side tone.
Center freq is locked to 0.00 on CW and 1.35 on Data. Both with the asterisk
showing.
Monitor and center freq. works fine on SSB.
Please note that I also installed KRX3 and KDVR3 today but I'm fairly
Guy, K2AV wrote:
Did you power off the K3 immediately after updating the firmware? I
usually get strange results on something when I forget to do this. I'm
using 2.73 without any problem I know of.
Yes I did Guy. But Wayne B. wrote me an e-mail and suggested I hold the
pitch button
It's been a while since I last saw anyone report a KRX3 arrival. Does anyone
know what the current status is?
I ordered mine along with my K3 March this year. The K3 arrived in August
but I haven't heard anything about the KRX3 yet. Looking forward to it
however!! :)
73,
Are - LB3SA
KX1, K2, K3
If you want some of the best money can buy I would suggest the AKG HSC271.
You can also get AKG's without microphone.
http://www.frontendaudio.com/AKG_HSC271_Headset_Microphone_p/-02781.htm
Are - LB3SA
KX1 - K2 - KX1
Jack Colson wrote:
The manual states that headphones having
Has anyone received or tried the DVR yet? I'm not sure if this is yet to be
developed or if they started to ship it. As far as I understand it is due to
be shipped to me sometime late this fall - but I have a late serial number
on my K3 (S/N 1412).
Are - LB3SA
KX1 - K2 - K3
--
View this message
which in my case
was a can of sardines and a six pack...)
Here's a link to a picture (32kb) of a very happy LB3SA on his first solo
tent/backpacking trip with a freshly buildt KX1 and buddy pole:
http://www.la8z.com/images/img5.jpg
Are - LB3SA
KX1, K2 and K3 (I know - but a K1 will join the others
VFO B
is a must for this. Does anyone know if either N4PY or Ham Radio deluxe will
give me control of the CONFIG menu?
A new encoder will be ordered on Monday of course but from Elecraft to
Norway often takes more than a week (gasp!) :)
73,
Are - LB3SA
KX1 - K2 - K3
--
View this message in context
HankK8DD
- Original Message -
From: LB3SA [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Saturday, August 09, 2008 2:29 PM
Subject: [Elecraft] K3 - how to CONFIG without VFO B?
I just received my K3 kit and love the radio already! I have a problem
however... After
places in a suitcase. Or... will it be too much? The K2 box was extrememly
small but I assume the K3 to be a bit bigger.
Are - LB3SA
KX1 - K2 - K3 on order
--
View this message in context:
http://n2.nabble.com/K3---shipping-size--tp575070p575070.html
Sent from the Elecraft mailing list archive
Thanks for all the responses! It was very useful.
If I had travelled myself I would have brought it. But since it will be a
colleague it sounds like it's best to send it over with UPS. That way I'm
reasonably sure it'll get here in one piece.
Are
Jon K Hellan wrote:
LB3SA wrote:
My K3
I also bought covers from Rose for both K2 and K3. Both covers are amazing!
Craig D. Smith wrote:
I recently purchased a cover for my K3 from Rose Kopp, and am delighted
with
it. Only 4 days from order to delivery. Fits perfectly and looks great!
There is a big selection of colors and
for the
FCC.
Are - LB3SA
KX1# 1864
K2# 6498
K3: Delivery late July
Alan Price-2 wrote:
Has anyone taken an un-opened Elecraft kit on a plane? Was it an issue?
Did they ask you to open the box?
--
View this message in context:
http://www.nabble.com/Kits-on-a-plane-question
check the soldering around the LED array.
Are - LB3SA
TF3KX wrote:
Well, I agree that the basic receiving performance of the rig may not be
significantly affected, or even noticed at all.
But in my case I am not able to set the range of the S-meter properly,
which I attribute to the low 8V
Thanks for the input Dave. It sounds like a good solution.
But I'm curious: Why does lifting the ground leg of the regulator and
'inserting' a diode in series compromise the regulator's short circuit
protection? Does it require a direct connection to ground?
David Lankshear wrote:
Of
Thanks for the input Dave. It sounds like a good solution.
But I'm curious: Why does lifting the ground leg of the regulator and
'inserting' a diode in series compromise the regulator's short circuit
protection? Does it require a direct connection to ground?
David Lankshear wrote:
Of
and pushed all the way in.
2) Or it could be that your headphone jack is defect. You can test this with
an ohm meter.
Good luck,
Are - LB3SA
KX1# 1864
K2# 6498
K3: Delivery late July
F8DFK wrote:
Hello, which can help me?
on my K2, when I remove the jack of the headphone on the front panel
in your message when I cliked on it but was
curious as to what waffles had to do with Elecraft and ham radio. As it
turns out - nothing. So I agree with you Larry; here it was right in front
of me: useless material that has nothing to do here.
Are - LB3SA
Larry Dodson-2 wrote:
I have subscribed
.
The receiver is now working very nice with an IMD of -136db. The filter/BFO
set-up went without a hitch and RX sounds like a million bucks with
absolutely no signs of ringing with tight filtering.
Are - LB3SA
KX1# 1864
K2# 6498
K3: Delivery late July
Don Wilhelm wrote:
Are,
The 'wierd' symptoms
. And if that's the case it was probably
made by me.
Are - LB3SA
TF3KX wrote:
Just out of curiosity...
Where was that solder bridge on the MC1350? Was it already on the SMD
assembly when you received it, or was it something you caused by your
soldering?
The reason I ask is that I had
to 3.8 volt according
to the manual you can solder a 10K resistor across RP6 pins 3-4 on the
control board (Gary from Elecraft suggested this for me). This works great
and I now see 3.8V but it doesn't really make much of an audible difference.
Are - LB3SA
TF3KX wrote:
In my case I never
with the never ending
brainstorming. As (experimenting) radio amateurs I don't think it's a big
stretch for some of us to never be 100% satisfied with the rig in front of
us and to always look for ways to make it better - regardless of how good it
is out of the box.
Are - LB3SA
KX1 K2 in operation and a K3
signal when I inject a signal at pin7 or 8
on the respective relays. But as soon as I touch either side of C6 for 40m,
L7 for 80m, C22 for 20m etc, it is as strong as it should be.
I have measured all the relays for potential shorts but they seem to be
fine.
Any ideas out there?
73,
Are - LB3SA
as short as
possible plus bending components down flat as required.
Best of luck,
Are - LB3SA ex VE3TSZ VA3ARE
David Dolsen wrote:
GM DE VE7TTJ
I have purchased a KX1 kit along with the 8030 board and ATU kit. I
want to do initial assembly incorporating the 8030 board (why put
things
39 matches
Mail list logo