Same here in Jefferson County, OR.
Mike
Sent from my iPhone
www.ks7d.com
@ks7d
> On Aug 18, 2017, at 7:36 PM, Phil Kane <k2...@kanafi.org> wrote:
>
>> On 8/18/2017 6:52 PM, Dan Presley wrote:
>>
>> Up here in Portland there’s so far no ARES mass callout.
&
Totality is only about two minutes, but the total event from when the moon
begins to cover the Sun until it completes its transit is over two hours. Lots
to see and experience.
Mike
Sent from my iPhone
www.ks7d.com
@ks7d
> On Aug 17, 2017, at 5:19 PM, John AE5X <a...@juno.com> wrote
I-25 In Colorado is going to be a complete mess. They are expecting
over 500k people to go to Wyoming essentially doubling the population.
Wyoming will not have the resources to handle this. Anyone going are
being told to bring fuel and food, etc. We have decided to stay home.
Heavy
Seeking ATU (KXAT2) board for my KX2. Anyone have one they can part with?
Very 73, Mike NK8S
Nasty Kharybdis 8 Sailors
FISTS #17907 NAQCC #8554 SKCC #15862T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
A pity an overview of the answers wasn't shared.
Regards,
Mike VP8NO
On 12/08/2017 22:08, Dave Cole wrote:
I'll respond to my post to keep things short... Thank you to both
posters for the info. You answered my questions.
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
On 08/12/2017 04:00
And there was much rejoicing
--
Michael Murphy -KI8R
m...@ki8r.com
twitter.com/ki8r
www.ki8r.com
614-371-8265
--
> On Aug 12, 2017, at 3:12 PM, Wayne Burdick n...@elecraft.com [Elecraft_K3]
>
Yes, that is the one I have. There are probably less expensive ones I could
have ordered but I needed it "NOW" and bought it off the shelf. It works well
for me with a new laptop and Windows 10 (Ugh).
Mike
On Saturday, August 12, 2017 9:07 AM, Jorge Diez - CX6VM
<cx6vm.jo
mono plug for the mic and the
stereo plug for the headphone to go to the K3.
I hope this helps.
73, Mike WA5POK
On Saturday, August 12, 2017 8:14 AM, Jorge Diez - CX6VM
<cx6vm.jo...@gmail.com> wrote:
Hello
I do digital modes with two cables from K3´s LINE IN and OUT to MIC and
if it is with someone down the block.
...I can tune down to the AM broadcast band and was able to hear some local
AM stations. :)
Mike AB7RU
(On a side note the tuner in the KX3 is great!. That thing was able to get
a match for 80 meters on the Buddistick which was showing something like
25:1 swr
to mention the DSP sampling rate for the
TX audio.
Regards,
Mike VP8NO
On 04/08/2017 15:46, Richard Lamont wrote:
> On 04/08/17 19:33, Brian Hunt wrote:
>> Here's some followup:
>> FLDIGI shows the "pumping" affect with carrier tones of 500, 1000, 1500,
>> a
Okay I really feel dumb, I am using this outside and the way the daylight
was reflecting or something gave the appearance it was sort of lit up.
Sorry for that!
This rig is a lot of fun! Even though the bands sound sorta quiet today...
Mike ab7ru
-xit in effect. What else causes it to stay illuminated?
This is my first elecraft radio... and I am back on the air after many
years off so I am excited to see that change!
73 Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net
the device it documents, are beautiful! Thanks, Wayne, and
all others who put this document together.
My last excuse for not buying a KX2 system has now been demolished!
73,
Mike / KK5F
__
Elecraft mailing list
Home: http://mailman.qth.n
Hi Gang,
Anyone have a K2 Nifty Guide they'd be willing to sell?
Thanks!
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
all
over the USB cable.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
. No Elecraft rig deserves the degradation of a HF telescoping antenna.
That's pure gimmickry, IMHO :-)
73,
Mike / KK5F
-Original Message-
>From: Wayne Burdick <n...@elecraft.com>
>Sent: Jul 27, 2017 9:03 PM
>
>Similar to our lab measurements. (Not bad for a 13 oz radio. I
Work 'em, Log 'em, move on ...
It's a hobby ...
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
> On Jul 26, 2017, at 12:56 PM, Nicklas Johnson <n...@n6ol.us> wrote:
>
>> On 26 July 2017 at 15:40, Joe Subich, W4TV <li...@subich.com> wrote:
>>
If you have a dummy load, try running JT8 or JT65 into that at your usual
power.If problem does not reoccur, then likely RFI is the culprit.
If it does reoccur, then likely the K3 is having issues.
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
>
You may want to have some minimum distance required for the QSO. Two KC2s and
a short length of coax would do the trick between two cars parked next to each
other. ;>)
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
> On Jul 15, 2017, at 5:53 PM, Wayne Burdick <n...@
73CNC weighted Main Tuning and VFO B knobs in as new condition. Main tuning
knob has ball bearing finger dimple. Black. New cost $150. Asking $115
shipped insured CONTUS only. PayPal preferred. Picture available. Email
ai6ii (at) arrl (dot) net 73 ..mike AI6II
--
View this message
SOLD 73 ..mike AI6II
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0-Mini-and-RemoteRig-RRC-1258MkII-Control-Unit-FOR-SALE-tp7632425p7632434.html
Sent from the Elecraft mailing list archive at Nabble.com
Both units in excellent condition. Includes connecting cable and MH2 mic. RRC
has wifi option for wireless connection to computer. $750 including
shipping CONTUS - Contact me: ai6ii at arrl.net 73 ..mike AI6II
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0
sure it was done correctly. Lo and behold the problem is now gone. I
can only conclude that there must have been some corruption involved and a
clean install corrected it.
Thanks again to all.
73,
Mike W0AG
On Wed, Jun 28, 2017 at 12:09 PM, Tom <tom...@videotron.ca> wrote:
> As Dick
Rick,
Thanks - I've checked all and the only one that is enabled is my USB 3.0
port for external backup.
73, Mike
On Wed, Jun 28, 2017 at 11:38 AM, Rick WA6NHC <wa6...@gmail.com> wrote:
> If you're using anything USB related (serial converter) start with: in
> Device Manage
Dick,
Thanks for the suggestion! I've checked mine and it's set to disabled like
yours.
On to the other suggestions!
73, Mike
On Wed, Jun 28, 2017 at 11:37 AM, Dick Dievendorff <d...@elecraft.com>
wrote:
> Sometimes PC USB devices can go to sleep based on lack of activity. The
>
Curious if anyone used 2000W inverter type generator for portable FD
operation? What brand machine and what experience with RF noise
encountered?Did anyone use Champion or Predator brand inverter generators?
Reply direct is fine.Mike AC5P
,
but don't know that the extra expense would be worth a try.
73,
Mike - W0AG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Steve,
How about using the phone jack on front panel for one, back panel for
another and then set "SPKR+PH" to yes if you want the gallery to hear?
Mike W0AG
On Tue, Jun 27, 2017 at 3:05 PM, Steve Wilson via Elecraft <
elecraft@mailman.qth.net> wrote:
> Hi all,
> Wi
An interesting question is just what is the difference between the KRX3
and the KRX3A.
Regards,
Mike VP8NO
On 23/06/2017 17:57, Gmail - George wrote:
The above assumes the new sub-receiver will operate with the old style
synthesizer
Wandering the web I notice that INRAD are offering K3 Roofers somewhat
less than Elecraft prices.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
CC user by VE7CC allows you to filter just about everything. It is free.
http://www.bcdxc.org/ve7cc/
W0MU
On 6/20/2017 8:19 AM, Roger D Johnson wrote:
I've just gotten interested in 6 meters but only CW and SSB. Is there
any cluster
software that lets you filter out the digital spots on
to move the heat
transfer to a much higher value than natural convection alone. Another way
of saying this is why does a car draw air over the radiator ( extended
surface) ?
Regards,
Mike K8KE
__
Elecraft mailing list
Home
Another reason to start moving to a LAN based solution as it is so much simpler
to share frequency data.
If vendors supported it at the box level cabling nightmares start to go away.
I'm now running raw socket connections where I can to rs232/ip converters.
Mike va3mw
> On Jun 18, 2
Given the small size of the mini banana plug for KX2 ground connection ,
what size wire are folks using ; assuming ease of transport , etc.
Thanks,
Mike K8KE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Test
Mike Morrell - K8KE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
om one end
of the band to the other in search of an answer to your call.
Mike / W8DN
Yes, a crusty OT
On 6/11/2017 5:41 PM, Erik Basilier wrote:
Ian,
I don't have any suggestions for a solution beyond what others have already
mentioned, but as a side note I would like to discuss the concept of &quo
it'll
>work SSB for the linear satellites.
--
Mike Herr
WA6ARA
DM-15dp
Home of The QRP Ranch
No trees were killed in the sending of this message, however, a large
number of electrons were terribly inconvenienced.
"Dad says that anyone who can't use a slide rule is a cultural illiterate
an
running ser2net or a serial over ip interface box.
I control mine from a hundred miles away.
Mike va3mw
> On Jun 7, 2017, at 10:08 AM, "k...@gmx.com" <k...@gmx.com> wrote:
>
> Hi, Can a KPA500 be operated remotely, for example, in a different room from
> the op
. I have seen
this on other SDR setups but never on the P3 putting this out there for your
input.
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
These guys have several. Well built. Not cheap. http://www.preciserf.com
Mike KD8RQE
In a message dated 5/28/2017 1:25:49 P.M. Eastern Daylight Time,
mike.ab...@gmail.com writes:
I'd like to get a directional coupler to, among other things, monitor my
transmit signal on a scope
Folks:
Can a "hard reset" be performed on the KX2?
I cannot seem to find that command in the manual.
Thanks,
Mike, K8KE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
at that point it
probably makes sense to build my own. Just curious what others have
done and if there are recommendations for reasonably priced,
commercially available directional couplers for HF at 100 W or more.
Tnx es 73,
Mike ab3ap
of illustrating
how to use it. If you are not a member it would probably be a good idea to
join.
https://groups.yahoo.com/neo/groups/SteppIR/info
You can also e-mail me directly and I can send you the PDFs.
k2mk dot mike at gmail dot com
73,
Mike K2MK
The Wizard wrote
> Ok, guys, I will be getting a ne
generation of young prospective Hams are definitely touch screen
oriented and I think they would find it attractive. Is there any way to use
one with the K line?
I am not adverse to using additional hardware.
Tnx,
Mike
W1BNC
K lines 2 and 3
capacitors
forced its discontinuation. It was a gem, after its design was altered to use
those capacitors, and backfit kits to older boards became availble.
So when you read of a four-band K1, the discontinued KFL1-4 is what made it
possible.
Mike / KK5F
-Original Message-
>From: ro
since 2000, which is how long I've had #175. What's the
serial on your recent K1? It's still a magnificent radio.
Mike / KK5F
-Original Message-
>From: roney <roneymo...@gmail.com>
>Sent: May 24, 2017 7:52 AM
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] K1 - V
rds,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this em
Hi Dave,
Yes this is the place and that's a great idea. It's called ballistic tuning.
I think it ultimately became the feature that makes the RIT dial a rapid
tuning dial. Check out the 2009 e-mail from Wayne that I pasted below. Maybe
Wayne will update his earlier comment.
73,
Mike K2MK
with a solution for this? I wish I had my K3/0
back, but I sold it and it’s gone.
TU,
Mike, W1MU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
I have used the K4KIO Hex beam on two DX-peditions, one to J6 and one to
V3. It fits inside a hard sided golf club carrier perfectly. They are
easy to put together and pretty light. I compared the Hex beam to a 2
ele SteppIR and could not really tell any difference.
k4kio.com
W0MU
On
transistors from pre-21st
century non-HD TV sets. It all adds up...with nary a ham station part of it.
:-)
Mike / KK5F
-Original Message-
>From: John Marvin <jm...@themarvins.org>
>Sent: May 18, 2017 7:44 PM
>
>Perhaps you are confusing VLF with VHF? The artic
The 12AT7 sounds familiar in that multivibrator circuit. Was it built from a
schematic in an older handbook? I have some from that era in my storage unit.
The next time I am there (next week) I can dig one out and look.
73, Mike WA5POK
On Monday, May 15, 2017 10:41 AM, Russ <mundsc
I've carried my FT897 on many airplanes with zero issues. I just carry it be
the handle.
I doubt you'll have any issues with your KX3. Just pull the batteries.
Mike va3mw
> On May 15, 2017, at 6:49 AM, Brad J. Butler via Elecraft
> <elecraft@mailman.qth.net> wrote:
>
&g
I traveled to St. Lucia with my KX3, matching amplifier and power supply. The
only thing TSA was interested in was my bencher paddle.
I had a copy of my license in my carrying case, just in case they were
interested. They were not.
Mike - KI8R
--
Michael
Good evening all, I just did the VFO mod on my KX3 with the new ball bearing
VFO. I now have the original VFO and if anyone would like it I am selling it
for 25.00 U.S shipping included.
Mike Weir
VE3WDM
__
Elecraft mailing list
Home
lable. Like, the ham being able to add their call into the code? (see this
example
<https://spacemodels.files.wordpress.com/2017/05/customized-display-kx3.jpg>
)
73's
Mike AB7RU
PS I tried to send this with the image attached and it got kicked back with
an error message so apologies if
...just some sort of simple bale that
remained attached and could be folded down in two seconds to prop up the front.
There were a couple of simple third-party alternatives available 15 years ago.
All development of new K1 features and options ceased by 2002.
Since I rarely use SSB and almost never contest in that mode, I'm selling
my 1.8K filter for that mode. Already removed and ready to ship prepaid
for $90. Let me know off list if you're interested - w0ag at arrl.net
Mike - W0AG
No thanks.
Mike KD8RQE
In a message dated 5/1/2017 9:51:49 A.M. Eastern Daylight Time,
va...@portcredit.net writes:
Someone did change this to OT, but it really isn't.
As others have also mentioned is that this is a list that is heavily
diluted by so many OT issues.
This is the only
Hi Mike,
I've seen this attempted with other forums for other topics. Inevitably,
the OT emails reach the same level in the new forum as well. It's just
human nature.
For my part, I'll stick with this Elecraft forum.
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Origi
I recently rearranged the shack and now my external keyer will not key the K3.
The internal keyer works just fine. I have checked the connections and they
are correct. I do have VOX on also. I must be missing something basic. Any
ideas?
Mike, W9QS
an alternative shipping method and Bob will try that. Tnx Again Bob.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Have you any idea what Elecraft transceiver you are using? I don't, after
reading your posting.
Mike / KK5F
-Original Message-
>From: Peter B <qwert...@gmail.com>
>Sent: Apr 27, 2017 10:38 AM
>To: elecraft <elecraft@mailman.qth.net>
>Subject: [Elecraft] no powe
I've had the best luck and quickest shipping with FedEx. It seems to me
that if the UPS site says 5 days for delivery, they will find a way to
be sure it takes 5 days, no matter how long it has to sit in a corner.
Mike / W8DN
On 4/25/2017 10:15 PM, w7aqk wrote:
Every so often someone asks
Rob:
Sorry about that, I was using an old chart, 1,2,3 are at -16,the rest is
the same. Too many charts and notes around here
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
On 23-Apr-17 21:16, Mike VE3YF wrote:
Rob:
FWIW, I use a Heil PR-40 which is pretty much the same as the PR-781
but as
suggested the first 3 anywhere - 14 to -16. A lot depends on your voice
but I think with all the assistance here on the forum you should get
good reports.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing
I am selling the KXPD3 paddle complete with 3 sets of springs (firm springs
installed) I have been using the Palm paddle with the KX3 from almost day one.
I just can't seem to give it up. So I am clearing the shack of the KXPD3
paddle. I am selling it for 60.00 U.S including shipping.
Mike
itfor
what I don't know. It's up for sale now for 160.00 US shipping included.
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
>Scanning the data sheet on the KX2 I don’t see AM as a mode, thought
>that was added a few months back.
>Does it have AM?
Take a look at the firmware revision description for the KX2. Also, look at
the KX2 operating manual errata A-5.
The answer is yes.
Mi
on the desk.
Thanks all !
Mike VE9AA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
ade-in-USA products,
what I don't like are surprises and obscure policies. Why can't they just
state the rate (per X$) up front? Or do they have to consult the oracle to
find out what the insurance rate is?
Mike Parkes AB7RU
__
Elecraft mailing
Decreasing by 200 each second led to the left. Makes 100W per led
starting at 100.
Regards,
Mike VP8NO
On 20/04/2017 15:29, Clay Autery wrote:
Yep... top LED 1900, decreasing by 200 each LED descending to the left
of the photo
For sale 73 cnc weighted main tuning and VFO B knobs in as new condition.
Main tuning knob has ball bearing finger dimple. Black. New cost $150. I
will selel them for $115 shipped insured CONTUS only. PayPal preferred.
Picture available. Email ai6ii (at) arrl (dot) net 73 ..mike AI6II
main regret in doing so was losing Feynman as adviser. Not
exactly related, another retired coworker as a young researcher used to
take a train up to Princeton each month to lunch with Einstein. I loved
listening to stories from these older guys when I was a young, new guy!
73,
Mike ab3ap
I wonder what would happen if a mobile KW station keyed up beside one of these
experimental driverless cars?
And I wonder how well the electronics in these cars are protected from RFI?
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
> On Apr 14, 2017, at 12:12 PM, Fr
Mike VE9AA...VE9AA/m
Mike, Coreen & Corey
Keswick Ridge, NB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I would only buy an HF Rig from Flex or Elecraft for the same reason.
Customer support for past or future functionality. Both talk directly to active
hams. They listen and make changes. Quickly.
Mike va3mw
> On Apr 13, 2017, at 9:30 AM, Lynn W. Taylor, WB6UUT
&g
Pi Zero W & accessories have been sold. Thanks! - Mike ab3ap
On 04/09/2017 04:34 PM, Mike Markowski wrote:
I bought a Raspberry Pi Zero W a few days ago for a project and then
realized I need a Raspberry Pi 3. [...]
Thanks!
Mike a
uld disappear.
>>
>> Not discussed is the "last digit" syndrome. Only believe the last
> digit
>> displayed if you can check that it is accurate.
>>
>>
>> 73 de Brian/K3KO
>>
>>
>>> On 4/9/2017 16:16 PM, Mike Harris wrote:
>
adapter [inland iH3048A]: $15.80
USPS Priority Shipping: $7.15
You pay: $60.00
Thanks!
Mike ab3ap
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
ges to TXCO ageing. In reality it all comes down to warm up time.
I hope this was worth the read.
Regards,
Mike VP8NO
On 09/04/2017 05:51, Roger via Elecraft wrote:
KREF3MDKT This modification increases the output levels from the KREF3
Reference Oscillator to provide proper drive level
Noted, thanks.
Mike VP8NO
On 08/04/2017 15:12, Richard Lamont wrote:
On 08/04/17 18:58, Mike Harris wrote:
I'm losing track here. Am I correct in understanding:
1. SSB Sidetone required when wearing headphones.
2. SSB Sidetone not required when headphones are unplugged and listening
Hi,
I use the rear panel jacks for my CM500 headset and I hear TX monitor in
both configurations.
Regards,
Mike VP8NO
2) If you use the REAR panel phones jack, the monitor audio comes through
the phones as expected. If SPKR+PHONES is set to yes, the RX audio comes
through the speakers
that, not a headset with mic, and are plugged
into the front panel socket otherwise plugging and unplugging would be
inconvenient.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
amateurs OET65B which go into a lot of detail on this subject. They are
dated late 1997 and I've not check to see if there are more recent
revisions.
Regards,
Mike VP8NO
On 07/04/2017 09:50, Wes Stewart wrote:
I assume you're commenting on the 1KW 20' away, although failed to say
so. Turn
and at nearly 69y my hearing is OK not having
been exposed regularly to damaging noise levels. I usually use CM500
phones anyway with CONFIG AF GAIN = LO and the AF gain pot seldom above
9 o'clock.
Regards,
Mike VP8NO
On 06/04/2017 19:08, Richard Lamont wrote:
Barry,
Thank you. You've confirmed
KX3HP (not KX2) with KXAT3HP capable (only with
stout 14 vdc external power) of the 35 watts you seek. It would sell as a
unified package that is the buyer's only choice, but not as multiple
components. Still ... the benefit for the effort would not be there.
Mike
Wondering when the next K3(s) Beta firmware mentioned a couple of weeks
ago will be released.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
rfect" match but that may not count for much! Have often
wondered if the earth worm population in that area ever recovered.
Mike / W8DN
On 4/2/2017 12:42 PM, Phil Hystad wrote:
I got my second KAT500 tuner to use with my new backup rig and while setting up
and testing and tuning with my two
L/C values.
That information applies to the KX3, *not* to the KX2 that is the target of
Wayne's post. Necessary technical information in the form of schematics and
part values has *not* been made generally available for the KXAT2.
Mike / KK5F
__
El
dable when basic
technical information is not made available.)
Mike / KK5F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
.
Mike / KK5F
-Original Message-
>From: w7aqk <w7...@cox.net>
>
>A while back, some enterprising person had posted a rather nice summary of
>all the Elecraft ATU's showing numbers of tuning combinations, etc. I can't
>find it now, but maybe someone can post it aga
should be pretty good for you, of course depending on your voice
characteristics. I think is is better to be a bit on the low side for
the settings then to be on the high side. Give it a whirl and see how
they work out for you.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com
d have not added any new gear or changed
settings. It's not doing it all the time. If I put the rig into tune via the
WSJT program once every 3rd try the K3 will produce this error message. NOTE:
if I put the K3 into tune via the tune button on the rig there is no issue.
Thanks in a
I think the FCC is going to change the rules on the gain factor,
hopefully soon.
1500w out on RTTY with zero limitations on duty cycle or very little
limitation.
Very quiet cooling.
6m would be nice but probably an issue at that power.
Price is probably the biggest what if.
No tune
Is Elecraft seriously considering a KPA-1500 or KPA-2K?
On 3/20/2017 12:53 PM, Clay Autery wrote:
Yes... to everything Dick said.
__
Clay Autery, KY5G
On 3/20/2017 11:49 AM, Dick via Elecraft wrote:
I'd like to see the KPA-1500 use dual 1kw LDMOS transistors as they
, 3 to 30 kHz.
Ultra Low Frequency ULF is 0.3 to 3 kHz.
Super Low Frequency SLF is 30 to 300 Hz.
Extremely Low Frequency ELF is 3 to 30 Hz.
I doubt that there is a firmware mod that could make the K3S work at ELF,
either going in or coming out! :-)
Mike / K
.
Mike / KK5F
--
>> Wait a second, there's a big difference between a sound pressure wave
>> and an electromagnetic wave at 10-kHz...
---
> Receivers THAT I AM AWARE OF begin coverage at 15 khz. Used to listen to
&g
Hi:
Does anyone have a K-Pod in Excellent cosmetic and electrical condition
that they are willing to part with. Tnx.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I had similar RFI issues with AT Uverse equipment, both on RX and TX.
I went with Comcast and have no RFI issues with them. Nearly our entire
neighborhood is Comcast. AT tried to deliver Uverse here via 50-year old
twisted pairs and it was a mess.
- 73 and good DX de Mike, K6MKF, IDXC
901 - 1000 of 6310 matches
Mail list logo