Maybe he bought the frequency:
<http://hamhijinks.com/local-man-does-in-fact-own-the-frequency/> :-)
73,
Mitch
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 83744
216H
http://www.remoterig.com/wp/?page_id=1010
Having helped to install dozens of amplifiers for remoting, I can say
that this feature set would put a new 1500w amplifier on the top of the
remote station heap if reasonably priced.
73,
Mitch DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir,
motely, but are an "idiot proof" method for people that prefer that
method of control.
Using serial port servers allows you to use any client software for that
device on the control side, including the SPE client.
For any further questions or details, please contact me off list.
73,
Mitc
K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436
On 26.12.2016 20:27, Jim Larson wrote:
I have a K3S connected to a remote K3 using the RemoteRig boxes. With th
to add on
the normal ground latency that comes on top of this in the 200 ms range,
giving you a delay of about three-quarters of one second! Things get
difficult for SSB once you hit about 200 ms, so this just will not work
due to physics.
73,
Mitch DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
turning from Ohio to here in Florida starting from the
holidays until May, so I need to figure this out real soon to help him
get it working before he leaves.
Thanks & 73,
Mitch DJ0QN / K7DX
--
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-
DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436
On 29.10.2016 17:44, Jim Cary wrote:
John/Barry
Thanks for the quick responses. I’ll be setting up
Note also that you can pull CAT data in parallel off of the radio RRC to
use a PC on that end, or to sync with a remote device (amplifier,
SteppIR, etc.)
73,
Mitch
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany:
If anyone has a spare 13 KHz filter available, please mail me direct.
Thanks & 73,
Mitch K7DX / DJ0QN
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 837
If anyone has a spare 13 KHz filter available, please mail me direct.
Thanks & 73,
Mitch K7DX / DJ0QN
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 837
If anyone has a spare 13 KHz filter available, please mail me direct.
Thanks & 73,
Mitch K7DX / DJ0QN
--
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile:+49 172 837
Fred,
Go into the RRC's web menus and click on "keyer settings", then go to
"side tone" and adjust the db down to an acceptable level.
73,
Mitch
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-
Note that the default RemoteRig setting in the control RRC gives a loud
CW sidetone. This can be easily lowered by going into the keyer settings
and change "side tone -db" to another number.
73,
Mitch DJ0QN / K7DX
Mitch Wolfson DJØQN / K7DX
10285 Boca Cir, Naples, FL 34109
Skype: m
time.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
ab/from November 2015:
3921 Leeward Passage Ct. #201
Bonita Springs, FL 34134, USA
Skype: mitchwo - Home:+1-239-221-9600 - Mobile:+1-424-288-719
Mike, I tried sending you my RemoteRig Networking Checklist directly by
e-mail to help you solve your problem, but your mail server rejects my
mails.
Please drop me a mail off the reflector from a different e-mail address
and I can send it to you.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
;-)
73,
Mitcn DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 18.02.2015 02:00, Joe Subich, W4TV wrote:
Looking for the *absence* of a change when the PTT is pressed or the
key is tap
=1010
Maybe you got me this time around, hopefully!
73 and happy holidays from Bonita Springs, FL
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 22.12.2014 19:23, Larry - K1UO
All this information is available on the RemoteRig web site at
http://www.remoterig.com/ and you can received detailed answers to any
questions you may have on the RemoteRig forum at
http://www.remoterig.com/forum/index.php
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 8
well.
I can take delivery in Florida after December 1st, before then in Europe.
Please contact me off list.
73,
Mitch DJ0QN
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
Jim,
I highly suggest that you post this issue on the RemoteRig forum at
http://www.remoterig.com/forum/index.php for the RemoteRig developers to
answer. They do not read the Elecraft reflector.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 05.08.2014 04:22, Jim - KE8G wrote:
Hi All,
I seem to be having a problem with my RemoteRig operation. Everything worked
p
e found no "home" routers so far (at least here in
DL) that support QoS tags. However, this will for sure help those that
do have routers supporting QoS.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49
advisable at all.
Feel free to contact me directly if you have any further questions.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 14.07.2014 03:36, Barry wrote:
A while
Sorry, I didn't give you a link, I assumed you knew the web site:
<http://www.remoterig.com>
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 26.06.2014
Brian,
You should ask this question on the RemoteRig forum, where the
developers monitor and answer directly (a parallel universe to Elecraft).
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
3.msg3878#msg3878>
73,
Mitch DJ0QN (in Dayton)
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
On 14.05.2014 21:39, Ron Gould wrote:
Anyone having success hooking up remotely through thes
rol RRC to use
DHCP if you move between different
networks. Then you won't have to manually set the IP number, etc.
73,
Mitch DJ0QN
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to dj...@arrl.net
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 -
n.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - I
http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
__
Elecraft mailing list
Home: http://mailman.qth.net/ma
stinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 3
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640
list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
__
Elecraft mailing list
Home: http:/
h the information using a telnet client. What i'm
looking for is a way to pass this output to a raspberryPI and hook the
controller to the PI's serial output.
I tried ser2net on the raspberry, but no success.
Anyone?
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
ft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobil
QSK-performance-tp7579062p7579068.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.
_
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wo
net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172
n/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 8
sl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
__
El
man.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
If anyone on the reflector has successfully interfaced their W2 to a
Moxa serial device server, please contact me off list. I am helping an
OM out with his remote station and I can't get this to work like the
other serial devices.
73,
Mitch DJ0QN
--
Mitch Wolfson
DJØQN / K7DX
Neubiberge
net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
h.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo
e to buy another Elecraft radio and that does
not take much of one at all.
73,
Fred/N0AZZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Ple
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP:
s of anything I may have
> misstated here. I'm still in the "novice" class on remote operation, but
> what I've been able to do so far is pretty fascinating.
>
> Dave W7AQK
>
>
> __
>
!
73,
Mitch DJ0QN
On 17.10.2012 23:58, Mitch Wolfson DJØQN wrote:
> Hi Madelyn,
>
> I moved to a new house and had e-mailed a couple of times to make sure
> that you use the correct address. Lisa was also involved. There is
> therefore a chance that this order will bounce back to you, I h
supposed to ship with my other order that you sent me the
mail for 14 minutes later. That one went to the correct address.
Best regards,
Mitch
On 16.10.2012 23:45, Madelyn Gomez wrote:
> this package contains you KXPD3 mod kit
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Neubi
//mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
lp: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Mitch Wolfson
DJØQN / K7DX
Georg-Kerschensteiner-St
: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Mitch Wolfson
DJØQN / K7DX
Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378
_
tandoff you should
> contact the parts department at Elecraft.
>
> 3) If you did get the same builders alert and parts, you may have all the
> standoffs you need. The length given is just for the top, large diameter
> portion of the standoff, not the overall length.
> From: "M
t; separate insert sheet with your kit"? There may be a
> clue there, as this directly relates to the 2-56 male-female standoff that
> you say you are missing.
>
> GL,
> Bruce, N1RX
>
>
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 4
__
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
&g
nt.
Has anyone else had a problem figuring out the standoffs, or am I the
only one finding inconsistencies in the manual?
73,
Mitch DJ0QN
--
Mitch Wolfson
DJØQN / K7DX
Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echoli
ft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -
.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 42, 81829 Muenche
t works fine up to 24 wpm on CW
> with my fingersize :-)
>
> If I will have to live in a place without antennas, I will become a type 1)
> user and then I will use RemoteRig and K3 (or KX3) to K3 remote control.
>
> 73 de OZ4UN
> Paul
> -Oprindelig meddelelse-----
>
t; Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
&g
://mailman.qth.net/mmfaq.htm
> Post:mailto:Elecraft@mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
> Sk
K3/0 (maybe expecting 12 or 13,8 V?) then surely a
> fine solution. ;-))
>
> Voltage *is* available on the AUX/MIC connector, too, as that is used for
> the IC-706 remote head connection. ;-))
>
> Vy 73, Olli - DH8BQA
> http://www.dh8bqa.de/
>
>
>
>
> ----- Ori
?
73,
Mitch DJ0QN
On 25.02.2012 09:48, Mitch Wolfson DJØQN wrote:
> Eric,
>
> Wouldn't the RemoteRig's wall wart be enough to power both the RRC and
> K3/0 using a pigtail adapter, or even better though the RRC's AUX/MIC
> connector (which I believe you already use
gt; This list hosted by: http://www.qsl.net<http://www.qsl.net/>
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
> __
> Elecraft mailing list
> Home: http:
mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/do
sted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
> Skype: m
_
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
&g
_
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
&
ease help support this email list: http://www.qsl.net/donate.html
>
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
> Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
> Echolink: 3001 - IRLP: 5378
tp://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> --
> Mitch Wolfson
> DJØQN / K7DX
> Georg-Kerschensteiner-Str. 42, 81829 Muenchen, Germany
> Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
> Echolink: 3001 - IRLP:
> K3 #4077
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
&
panel interface, just a computer with
> say TRX Manager, etc.
>
> Thanks for your continued help Mitch! I think people thinking about
> using the K3 remotely can do so with confidence that there is plenty
> of help in getting things working and already in just a few days it
0:22 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
>> We will also be putting up a K3 Remote page on the Elecraft page shortly
>> with app notes, FAQ etc.
>>
>> Elecraft will also be offering the Remoterig boxes and matching K3
>> cables for sale on our web page shortly, a
p; 2. Further details would be helpful.
>
> Thanks for your time.
>
> 73, Doug VE3MV
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mai
; [mailto:elecraft-boun...@mailman.qth.net] En nombre de Mitch Wolfson DJØQN
> Enviado el: Lunes, 31 de Octubre de 2011 03:21 p.m.
> Para: Johnny Siu
> CC: Elecraft
> Asunto: Re: [Elecraft] CQ WW SSB
>
> Hi Johnny,
>
> I have had a lot of problems over the years trying to o
Jorge,
Your answer is that they last just long enough to die on the first day
of a major contest in October. Don't ask me how I know that ;-)
Take Tom's advice and keep extra batteries on hand at all times.
73,
Mitch DJ0QN
On 28.10.2011 23:23, Jorge Diez - CX6VM wrote:
> hello,
>
> how long a
Hi Johnny,
I have had a lot of problems over the years trying to order things from
U.S. based stores using a foreign credit card. Most internet shops there
seem to think we are all some kind of criminal if we live outside of the
United States ;-)
One exception I have found is B&H. They have no
ubject: Re: [Elecraft] RemoteRig Elecraft K3 Twin
On 10/4/2011 1:34 PM, Mitch Wolfson DJØQN wrote:
> The product has been officially announced:
> http://www.remoterig.com/wp/?page_id=995
>
> Pricing is not yet available. I understand that a cable set will be
> available separate
The product has been officially announced:
http://www.remoterig.com/wp/?page_id=995
Pricing is not yet available. I understand that a cable set will be
available separately.
73,
Mitch DJ0QN
__
Elecraft mailing list
Home: http://mailma
Unfortunately, APP is not widely used in Europe, and can be expensive and
hard to find. I have always brought mine over from Dayton trips, etc.
If Chris does indeed need to replace his connector, he can e-mail me
directly, and I will drop him a pair in the local mail.
73,
Mitch DJ0QN
- Ori
I find that the NTP client built into Windows often does not work, plus
updating only once a week is not enough on some computers (some computer
clocks have accuracy that rival those in older cars, or the K3).
Therefore, I have been using a small program called "Dimension4" for a
number of year
ay, December 23, 2008 10:28 AM
Subject: Re: [Elecraft] RE: Any Amplifier News
Checking product information I can see it is advertised as a 1000W PEP
amplifier. What happens with IMD at over 1300W?
/ SM2EKM
-------
Mitch Wolfson DJØQN wrote:
Eric,
The thing that makes th
Eric,
The thing that makes the KPA-1500 most attractive from my perspective, and
surely others, is it's supposed SO2R ability. What other amps on the
market offer similar capability other than the SPE Expert 1K-FA (which is
only 1kW)? A KPA-1500 is domestic, so eliminates the extra steps
that responded!
73,
Mitch DJØQN
- Original Message -
From: "Bill W4ZV" <[EMAIL PROTECTED]>
To:
Sent: Thursday, October 30, 2008 1:19 PM
Subject: Re: [Elecraft] K3 - KRX3: AF Gain
Mitch Wolfson DJØQN wrote:
Now I notice that my KRX3 sensitivity is much low
-
From: "Lyle Johnson" <[EMAIL PROTECTED]>
To: "Mitch Wolfson DJØQN" <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, October 29, 2008 1:43 AM
Subject: Re: [Elecraft] K3 - KRX3: AF Gain
Hello Mitch!
I have the main receiver's AF Gain set to HI, but I can't find
I have the main receiver's AF Gain set to HI, but I can't find a way to
enable that function on the KRX3. Am I missing something, or is this a
feature request?
With the main receiver on HI, the difference between the two receivers is
too great to be able to hear very well on the KRX3, at least
In that case, it would be better for them to rename these "pre-release" or
similar, instead of beta.
I worked for Microsoft for several years, and now have a complete aversion
to the term "beta", so I will never load something using that term for
production use. I assume I am not the only one
Julius,
I will be there.
73,
Mitch DJØQN
K3 #317
- Original Message -
From: "Julius Fazekas" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, May 07, 2008 3:51 PM
Subject: [Elecraft] Dayton Contest University
Any Elecraft owners attending CU at Dayton this time
around? Would like to meet a
Mark,
Did you remember to click on and install the FPF upload? It was not checked
on mine by default, but you need it for this update.
73,
Mitch DJØQN
- Original Message -
From: "mark crossland" <[EMAIL PROTECTED]>
To:
Sent: Sunday, May 04, 2008 2:29 PM
Subject: [Elecraft] firmware
I am currently travelling in the U.S., and will be taking my long-awaited K3
back with me to Munich.
I had it shipped to an old friend in Jupiter, FL, where I plan to assemble
it at his house when I arrive there next week. The exact assembly dates will
be the 5th and 6th, before heading to the
90 matches
Mail list logo
