USB devices in the VMWare settings
(I think there is a tab on the top to do so.) If this is not done, then no
ports are available.
Hope that helps.
73 Tom
va2fsq.com
-Original Message-
From: Don Wilhelm
Sent: Friday, February 16, 2018 5:55 PM
To: Greg Best ; elecraft@mailman.qth.net
nning
with the K3. If you use any virtual ports, it will not work reliably.
A WinKey is a good solution and not expensive. Most software packages
support WinKey.
73 Tom
va2fsq.com
-Original Message-
From: Bill DeVore
Sent: Wednesday, February 21, 2018 8:52 PM
To: elecraft@mailman.qt
Hi,
Win4K3Suite has built in virtual port sharing supporting up to 6
simultaneous programs or hardware devices. It can work with any third party
software. You can see this in this video.
https://youtu.be/1jh6IS0S1dE
73 Tom,
-Original Message-
From: Michael Aust
Sent: Thursday
/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
---
This email has been checked for viruses
g? It would have to be a stereo input for the IQ signals.
Here's a quick test: Pull up the spectrum and turn the VFO A knob on the
radio. If you see the signals on the waterfall move in different directions
around the center frequency, then you are using a mono feed.
73 Tom
Va2fsq.com
-Origin
ys use Omni-rig.
Much more stable.
73 Tom
Va2fsq.com
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Wes
Sent: June 11, 2019 2:47 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 port sharing and FT-8
Maybe the collective wisdom of this group has an answer
s and dah's. So the solution is a WinKey for CW. You can buy one for
under $40 these days and well worth it.
73 Tom
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Dave Fugleberg
Sent: June 12, 2019 9:08 AM
To: M. George
Cc: Elecraft Mailer
Subject: Re: [El
Hi,
What exactly do you mean?
It is always set to whatever you send. If you explain this a little more
perhaps I can help.
73
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Randy Farmer
Sent: July 21, 2019 2:44 PM
To: elecraft@mailman.qth.net
Subject: Re: [Ele
Hi,
Sorry, I forgot my signature. It's Tom va2fsq.
I've tried this out quite a bit with Win4K3Suite, and in fixed mode changing
bands always results in the correct behavior. The left frequency in the P3
display is always where it was left the last time you were on that band.
Win4K3Su
th up to 6 applications. It also has
a built in HRDLogbook server and the EiBi Shortwave database which is now up
to date.
You see more information here:
https://www.youtube.com/results?search_query=win4k3suite
and download a fully functional 30 day trial at va2fsq.com
73 Tom
va2fsq.com
---
This
the radios are under 100W but one is 200W. Will this be an issue
with the KPA500 in bypass?
A related question, what if I accidently put the 200W in in operate? Just
covering all my bases here.
Thanks, Tom
Va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https
Hi,
I have a MicroKeyer II with the Elecraft K3 cable set for sale.
Used sparingly during the development if Win4K3Suite.
Price: $325 US shipped in North America.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Hi, I have two filters for the Elecraft K3 for sale.
One is the KFL3A-250 and the other is the KFL3A-6K.
$80 US shipped in North America.
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Hi,
BTW they are $80 each.
73 Tom
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Tom
Sent: August 28, 2019 7:42 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] 8 pole Inrad filters for sale
Hi, I have two filters for the Elecraft K3 for sale.
One is the
Hi,
The 250 is sold.
Thanks
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Tom
Sent: August 28, 2019 9:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 8 pole Inrad filters for sale
Hi,
BTW they are $80 each.
73 Tom
-Original Message-
From
e
and download a fully functional 30 day trial at va2fsq.com
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qt
Price drop. $275 Shipped in North America
Subject: [Elecraft] Microham MicroKeyer II for sale
Hi,
I have a MicroKeyer II with the Elecraft K3 cable set for sale.
Used sparingly during the development of Win4K3Suite.
Price: $325 US shipped in North America.
73 Tom
va2fsq.com
---
This email has
d the reviews! https://www.eham.net/reviews/view-product?id=11214
73 Tom
va2fsq.com
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qt
e any
product to transfer firmware or undocumented commands.
If you must do this remotely, then you should have a PC at the remote site
and then connect via something like TeamViwer.
73 Tom va2fsq.com
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mitch Wolfson DJ0QN /
of a single COM port
with up to 6 applications. It also has a built in HRDLogbook server and the
EiBi Shortwave database.
You see more information here:
https://www.youtube.com/results?search_query=win4k3suite
and download a fully functional 30 day trial at va2fsq.com
73 Tom
va2fs
Hi,
I used the P3 as the reference standard in developing Win4K3, Win4Icom and
Win4Yaesu.
Useful tool but would be much better with a HDMI output.
73 Tom
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Don Wilhelm
Sent: February 17, 2020 1:40 PM
To: elecraft
with up to 6 applications. It also has a built in HRDLogbook server and the
EiBi Shortwave database.
You see more information here:
https://www.youtube.com/results?search_query=win4k3suite
and download a fully functional 30 day trial at va2fsq.com
73 Tom
va2fsq.com
--
This email has been ch
as HRD Logbook,
DXLabs, N1MM and more.
- Full access to almost all regular and tech mode menu items.
Win4K3Suite offers a free full featured 30 day trial.
You can see it in action here:https://www.youtube.com/watch?v=htVlc9x0IoU
and the trial is at va2fsq.com
Thank, Tom
va2fsq.com
---
This email
free full featured 30 day trial available at va2fsq.com. If you ran
the trial in the past and would like to try it again, please drop a note.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
upport.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
else
experience this?
My HV voltage is 75 at idle. I am using 120V power. When I key down it
drops to around 58. Manual says 60+ is best. Don't know if this has
anything to do with the hum?
I have not contacted Elecraft yet. I wanted to hear what folks say first.
73
r one
window. If you are just running one Window's program it works fine but
once you start multi-tasking it can be a problem particularly if the
programs are graphic intensive or memory hungry. I often found the
computer slowed up too much and gave up on the idea hence the stand alone
computer
watch?v=htVlc9x0IoU
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home:
this in the
menus for the K3 under TUN PWR.
73 Tom
va2fsq.com
-Original Message-
From: Bill Wiehe via Elecraft
Sent: Sunday, October 30, 2016 3:20 PM
To: Elecraft Reflector
Subject: [Elecraft] KAT500 - Tuning Anomoly
Up until last week, my KAT500 has run lawlessly. However, it now has a
Hi,
Can someone send me the KX2 manual please?
It is no longer available at the link specified on Elecraft’s server. I’m sure
they will fix it, but I need it now if possible.
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com
Many thanks! I now have 6 copies, lol
Seems a few minutes after I looked for it it came back up.
73 Tom
-Original Message-
From: Tom
Sent: Tuesday, November 1, 2016 7:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX2 manual not found on Elecraft server
Hi,
Can someone
There is a free full featured 30 day trial. Please contact me if you have
tried this in the past and would like an extension on your trial.
Thanks very much for your continued support.
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com
the SDRPlay
RSP. There is no configuration necessary to support all modes and filter
settings for QSY's.
There is a fully functional 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/
even products from Eltima such as their serial port
monitor will crash on their own if left running long enough. Even then, the
MicroHam uses Eltima drivers and they have no issues I believe.
However, LPB does not pass all K3 commands and this will cause issues.
73 Tom
va2fsq.com
-Original Me
t all when you are not using it.
73 Tom
-Original Message-
From: George Kidder
Sent: Tuesday, December 6, 2016 1:37 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] Fwd: Re: LP Bridge crashes with K3
Larry and all,
I have now tried adjusting the buffer settings. Originally
button. The oscillator will stop running
shortly after the last key press or the last data communication with other
equipment and restart automatically when needed.
2.
3.
Tom, KQ5S
On Sun, Dec 11, 2016 at 11:40 AM, Ken K3IU wrote:
> I sent an email query to Gary Surrency t
Try http://www.ssbusa.com/LINGUA.html. Not a very well defined web site.
Let us know if you contact them.
73,
Tom - KQ5S
On Wed, Dec 21, 2016 at 9:47 AM, W0MU Mike Fatchett wrote:
> Thanks.
>
> I wonder if there are plans for a USA distributor? I would like to try
> one out.
>
list
continuously. There are a couple of commands like that which then require
reading the VFOB display to determine where you are.
It should work fine now if timing isn't an issue.
73 Tom
va2fsq.com
-Original Message-
From: Don Wilhelm
Sent: Tuesday, January 3, 2017 11:23 PM
To: Ha
ews:
https://www.eham.net/reviews/detail/11214
Thanks you for your support!
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
__
Elecraft mailing list
Home: http://mailm
When using WinKey with the K3S in semi-break in mode how do you adjust the
timing so that the K3S does not drop out between the dits and dashes? Mine
sounds like QSK because the rig does not stay keyed. Win4K3Suite CW macros
do the same since I have it set up for CW via WinKey.
73,
Tom - KQ5S
Jim,
It seems like most of the larger displays are 19V. At least mine are. My
one smaller screen is 12V. I have powered it from the station power. Are
your monitors only 12V? If not how are you powering them from your station
power
73,
Tom - KQ5S
On Wed, Jan 25, 2017 at 1:06 PM, Jim Brown
I just made this mistake in replying to a post by Jim. I was not paying
attention and sent the reply direct to him :-)
73,
Tom - KQ5S
On Wed, Jan 25, 2017 at 6:45 PM, Jim Brown
wrote:
> That depends on settings within the email reflector and also on settings
> within your email progra
Are folks hooking their radios directly to the power supply without a fuse
inline? I noted that the Elecraft supplied cable for my K3S did not
include a fuse.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 12:49 PM, George Thornton <
gthorn...@thorntonmostullaw.com> wrote:
> The history of
Thanks Ron. Not sure if my old Astron 35A has built in over-current
protection or not. I know it has the crowbar protection for over voltage.
Does the K3S have any kind of internal protection like a resettable fuse?
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 4:15 PM, Ron D'Eau Claire
Thanks Don. I though the K3S was protected but I did a quick search of the
manual for fuse and only found a reference to fusing both positive and
negative cables if using a battery.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 4:47 PM, Don Wilhelm wrote:
> Tom,
>
> The K3 and K3S 100 watt
Thanks Ron.
73,
Tom - KQ5S
On Sun, Jan 29, 2017 at 8:48 PM, Ron D'Eau Claire wrote:
> Yes. There is an automatic resetting fuse in the main circuits and a
> circuit
> breaker for the amp that is reset with a button on the back of the K3S.
>
> 73, Ron AC7AC
>
Hi,
I just hooked up my Microkeyer 2 installed all software and the software is
communicating with the radio. However if I talk into my Mike there is no
transmit occurring via Vox or PTT on the radio.
Pi am using a Heil preset as received from Elecraft.
I have the k3 front mic cable.
I have
Hi
I am used to sound card based ratty where the software just sends the sound to
the radio via line in.
In the case of fskd and a program supporting fskd, what exactly is being sent
to the radio? Can you use the k3 without software in this case?
Thanks
Thanks
loose! I just installed it
all yesterday and did lots of connections.
Thanks
Original message
From: Rick Tavan N6XI
Date: 29/12/2013 18:03 (GMT-05:00)
To: Tom
Subject: Re: [Elecraft] How does fskd work on the k3?
You can FSkey the K3 via the ACC jack pin 1. The keyi
Hi
Thanks just found that.!
Thanks to all for the hints.
Tom va2fsa
Original message
From: Richard Ferch
Date: 29/12/2013 20:50 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] How does fskd work on the k3?
Tom,
If you are using MMTTY for FSK with
t had already tuned there.
Tom
Original message
From: Roy Morris
Date: 30/12/2013 14:18 (GMT-05:00)
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3/KPA500/KAT500 SWR Problem
I have also experienced the FAULT LED coming on with indication of high SWR
during
EXCELLENT
Amateure Radio Operator N5GE
On Tue, 31 Dec 2013 11:23:23 -0800, you wrote:
>Hi all,
>
>Yesterday we analyzing the reports of unexpected SWR faults and band changes.
>They fall into a few categories, and we have a good handle on how to deal with
>all of them in firmware. (Faults
If you are working the bands 30m and below and have the room you can
use inverted V antennas that all have the same feed point. The power
will be distributed to the the antenna that is resonent at the
transmit frequency.
Until I was able to get room and funds for rotable antennas and
longer wire
No.
The K3 works very well with built-in 2m XVTR and the Elecraft
external XVTR kits.
On Thu, 30 Jan 2014 18:58:46 -0800, you wrote:
>A friend on another list came up with the idea of an all-mode
>transceiver for 2m and above.
>It would be especially nice to see coverage of 1.25m, and possibl
n the mini beam, it's gone. Any
ideas why the attic antenna is doing this?
Thanks
Original message
From: Wayne Burdick
Date: 08/02/2014 19:29 (GMT-05:00)
To: tom...@videotron.ca
Cc: Elecraft
Subject: Re: [Elecraft] Issue with the KX3, KXPA100 and software on
Hi
The gain is definitely the fix. That plus the attic. Thanks.
Original message
From: Wayne Burdick
Date: 08/02/2014 19:57 (GMT-05:00)
To: Tom
Cc: Elecraft
Subject: Re: [Elecraft] Issue with the KX3,
KXPA100 and software on 17m...can "hear" the seria
It's the USB to serial.
But like Wayne mentioned there's a fix.
Thanks
Original message
From: bill conkling
Date: 08/02/2014 21:49 (GMT-05:00)
To: tom...@videotron.ca
Cc: Elecraft
Subject: Re: [Elecraft] Issue with the KX3, KXPA100 and software on 17m...
I solved the real estate problem Bought a 39 inch 4k resolution monitor for
less than 500 bucks. That plus my 30 rotated vertically takes care of this
nicely lol..!
Original message
From: Frank Precissi
Date: 10/02/2014 20:27 (GMT-05:00)
To:
Cc: Elecraft Group
Hi The Avermedia Hd game broadcaster with the vga input will work alone, or
with win4k3suite which allows point and click Qsy.
Be aware however, that the 32 bit drivers have issues. On a 64 bit system
they work fine.
73s Tom
Va2fsq.com
Original message
From: Howard
Hi
No you do not need a Y cable to connect the P3. You connect to a serial cable
between them and the p3 then connects to the MicroHam.
73s Tom
Original message
From: Richard Thorne
Date: 05/03/2014 08:37 (GMT-05:00)
To: Elecraft Reflector
Subject: [Elecraft
Looks like im going to have to wait until the snow on the roof is gone. Cant
budge the cable at all. And on top of that we're geting 10 more inches tonight.
Thatnks for all the responses
Tom
Original message
From: Ian White
Date: 12/03/2014 03:59 (GMT-05:00)
To
ly the best way
would be to have a threshold where if the, signal was above this, then it would
not be considered in the calculations.
That is preferable to turning off the auto balance since the correction is
frequency dependent.
73s Tom
Original message
From: Jim Bennet
Hi
You could check out Win4k3Suite at va2fsq.com
Tom
Original message
From: Jim Bennett
Date: 24/03/2014 14:17 (GMT-05:00)
To: Elecraft Reflector Reflector
Subject: Re: [Elecraft] K3 Software???
You might want to specify Mac or Windows - big difference.
On
Hi
I second the hardware mod. For programs such as Win4k3suite which poll the Kat
keeping the sleep mode on introduces unacceptable delays. So instruct people to
turn sleep mode off.
73s Tom va2fsq
Original message
From: "Stan Gibbs, KR7C"
Date: 11/04/2
a.de
Am 15.04.2014 22:21, schrieb tom...@videotron.ca:
> Hi,I was wondering if one can use the FM filter if you set the width to 6kHz
> for ESSB mode or do you need a 6kHz filter?
> Thanks
> Tom
> vba2fsq.com
> __
&
o:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
Hi
There is a version dependency for HRD. Also be sure you are running the logbook
and dm780 only not the control program .which version are you running?
Thanks
Sent from my iPhone
On 2013-06-26, at 10:46 PM, gold...@charter.net wrote:
> All those functions work for me with HRD.
>
> Did you p
, Tom VA2FSQ. COM
Check out the video!
http://m.youtube.com/#/watch?v=Api2nomzg3U&desktop_uri=%2Fwatch%3Fv%3DApi2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Version 1.10 of Win4K3Suite is now available.
New features include support for Fixed and Tracking mode for the P3 as well as
general P3 control improvements.
Support for Logic 9 logging program is now added. Tested logging programs
include DX4Win, DXKeeper, HRD 6 and 5, and Logger32,
Version 1.1
noisy than the vertical.
Tom
Sent from my iPhone
On 2013-07-06, at 5:50 PM, "d...@lightstream.net" wrote:
> Hello Tom,
>
> Thanks for your post! As it turns out, I have a local source of broadband
> noise that is not quite as bad as yours, but it still causes me grief.
>
Hi
Can anyone tell me what would be the most popular rs232 (or USB) relay board
for use in computer control of a k3 setup? I use the canakit 4 relay USB board.
Are there others?
Thanks
Sent from my iPhone
__
Elecraft mailing list
Home:
the difference
between the serial versions which use a USB connector anyways?
Any ideas? They do look good, with relays supporting 15a at 120
Tom
Va2fsq.com
Sent from my iPhone
On 2013-07-16, at 7:25 PM, William Evans wrote:
> I have used the denkovi 16 relay set and the 8 relay set w
Yup same ones. Looks like the Ethernet ones are good for remote access. You can
turn on whatever you want as long as the relay board is powered.
Thanks for all the replies.
Tom
Sent from my iPhone
On 2013-07-17, at 10:34 AM, Greg wrote:
> I have heard very good reports on these...
>
Hi
That would be news to me, since the k3 and kpa use different serial ports.
Tom
va1fsq.com
Sent from my iPhone
On 2013-07-17, at 2:24 PM, William Levy wrote:
> Somewhere I thought there was written a short macro to designate a button
> on the K3 to turn on the Amp from the K3.
>
&
Hi
Yes they talk to each other but only send band change info and certain other
statuses. To do this with only a macro and no possible hardware is not possible
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:06 PM, William Levy wrote:
> Yes, but they are connected directly in
Ok could be undocumented.
Lets hope Wayne chimes in.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:25 PM, William Levy wrote:
> Not what Wayne says.
>
> On Jul 17, 2013, at 3:24 PM, Tom wrote:
>
>>
>> Hi
>> Yes they talk to each other but only sen
d the dedicated serial port for the kpa to control it.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 5:34 PM, Don Wilhelm wrote:
> Tom,
>
> Think about it a bit. The K3 ACC cable connects to the KPA500 for the band
> data only. So how could any form of a command be passed o
Hi,
Ok it seems this is cleared up. Thanks Dirk. But it was Bill who thought it
could be done, not me. I know it can't.
BTW, there is a command that can turn on the KPA via a serial connection.
Tom
va2fsq.com
Sent from my iPhone
On 2013-07-17, at 10:12 PM, Don Wilhelm wrote:
> Tom
Hi swaths the K3 zipper?
Sent from my iPhone
On 2013-07-21, at 7:34 PM, Ralph Parker wrote:
> The dreaded K3 'zipper while tuning' appeared suddenly yesterday in the
> middle of the CQ VHF contest.
> I've had #1823 since 2008, and never had (heard?) it before, so I didn't
> pay attention to th
One caveat with the 1920x1080. Not all monitors work correctly. I have 4 sell
monitors none of which work right.
Tom
Sent from my iPhone
On 2013-07-23, at 5:28 PM, Dave Hachadorian wrote:
> Resolution 1920 x 1080, the bigger the better. I have two K3/P3's with two
> 23" moni
, Tom
va2fsq.com
Watch the video! http://www.youtube.com/watch?v=Api2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Hi
Due to popular demand, Win4K3Suite now supports Windows XP
Downloads at va2fsq.com
Thanks, Tom
Watch the video
youtube.com/watch?v=Api2nomzg3U
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
power and cooling brand.
Get a decent monitor from Samsung or dell for example. No rfi in my experience.
Regards, Tom
va2fsq.com
Sent from my iPhone
On 2013-08-10, at 10:47 AM, Richard Neese wrote:
> if you use a pci card serial its just like using a usb to serial or a edge
> port seria
Hmmm can't be too many scrap yards up there...
Seriously if he's going to scrap them why ask so much?
Sent from my iPhone
On 2013-08-16, at 6:07 PM, Edward R Cole wrote:
> Lance,
>
> Wow...and I cannot do it, darn! But I have my ch.2 Platinum for 6m. What
> perked my attention was the freq
Huh, I just noticed I have them too.
So, given that regular cables don't always remove these, how does one build a
mil-spec bnc cable?
Tom
Sent from my iPhone
On 2013-08-27, at 9:43 AM, Bill wrote:
> Regarding the hump monster appearing on the screen of the P3:
>
> I had th
So a Pasterack bnc male to bnc male using 24" of RG58 is 23.90 + shipping
Not so bad if it fixes the problem.
Is it supposed to be rg58?
Thanks
Sent from my iPhone
On 2013-08-27, at 12:31 PM, George Danner wrote:
> Tom,
> Try Pasternack or Bracke.
>
> I've used their p
in my software Win4K3 Suite if I
provide a K2 and KX3 version.
Thanks, Tom
Va2fsq.com
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I have determined that I can emulate the firmware and provide full
functionality via serial commands.
Now, would there be an interest for P3 usage on a kx3 or k2?
Tom
Sent from my iPhone
On 2013-08-27, at 10:33 PM, Tom wrote:
> Hi
> I know that the P3 requires a serial connection to
port redirection allowing you to use
third part software remotely and connect to the physical device via IP.
Anyone in the montreal area that can lend a Microham for a few days?
Regards, Tom
va2fsq.com
iPhone
On 2013-09-04, at 3:10 PM, Karl-Heinz - DL2FAG wrote:
> I have just test it with
There is no justification to say my software is so poorly written. That us very
unprofessional
Thanks joe
Sent from my iPhone
On 2013-09-04, at 3:35 PM, "Joe Subich, W4TV" wrote:
>
> On 9/4/2013 3:10 PM, Karl-Heinz - DL2FAG wrote:
> > I have just test it with virtual serial ports (g
I don't know about you, but I keep my cell phone in my pocket. I don't really
like the idea of 1W of power being beam at my family jewels!
Sent from my iPhone
On 2013-09-12, at 12:34 PM, aj4tf wrote:
> And, just a reminder, just because you get a patent on something doesn't mean
> it can be m
CW in SSB mode.
2. Connect a cw key to the K3.
3. After you have moved to the new band, tap the CW key one time and
the tuner and amp will be ready to transmit SSB.
Tom N5GE
On Tue, 24 Sep 2013 10:45:13 -0400, you wrote:
>That is what I was looking for - I am not alone and perhaps it is ju
Even if they never add the feature, wouldn't it be better to use a
device like the Kenwood SM-230 monitor, rather than giving up an
excellent XCVR for the sake of monitoring youe signal?
Tom
N5GE
On Tue, 24 Sep 2013 10:03:50 -0500, you wrote:
>I know we aren't suppose to do the &#
my opinion, (and I could be wrong) CW is
still the most reliable form of communication during poor conditions,
due to it's narrow band width and narrow filtering possibilities.
Tom
On Wed, 25 Sep 2013 01:11:18 +1000, you wrote:
>Tom,
>
>Your suggestion works well, however, when the
computer case.
It was not cheep, but was cheeper than buying 8 RS232 to USB connector
cables.
Tom
N5GE
On Fri, 27 Sep 2013 20:36:22 -0700, you wrote:
>I use a four port USB to serial adapter that connects to four Elecraft
>devices. It's almost as cheap and a bit simpler than a
d down retuning and just in tune mode I would see the same
thing if I changed the frequencies by a large amount.
So what gives? What am I doing wrong?
Thanks, Tom
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
__
Elecraft mailing
Yes the kat3 is in bypass. Also tried this with two different antennas with the
same result
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
Original message
From: Tom
Date: 30/09/2013 01:06 (GMT-05:00)
To: Gary Gregory
Subject: Re: [Elecraft] Something'
Hi
I tried everything suggested and there is no difference, I guess a call to
support is needed.
Thanks for all the suggestions
Tom
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
Original message
From: Dick Dievendorff
Date: 30/09/2013 07:40 (GMT-05:00)
To: Tom
the two devices work very well
together.
Tom Childers,
N5GE/NNN0KN
On Mon, 30 Sep 2013 20:49:43 -0400, you wrote:
>Will the KPA500 work on all freqs outside the HF Ham bands.
>I want to make sure it will function on MARS freqs.
>
>
BW using the pbt and
as soon as it gets to 2.0. I hear signals. Turn it down to 1.9 and nothing. Am
I doing something wrong here? I'm used to a k3
Thanks, TOM
VA2FSQ
Envoyé depuis le Samsung GALAXY S4 via le réseau SFR
__
Ele
201 - 300 of 2357 matches
Mail list logo
