Jim,
You can download the 5.38 file from
ftp://ftp.elecraft.com/K3/firmware/archive/.
Don't forget to download the corresponding FP and DSP files as well.
Hint, look at the release notes to identify the related versions of FP
and DSP firmware.
73,
Don W3FPR
On 10/3/2016 6:47 PM, Jim McDona
ftp://ftp.elecraft.com/K3/firmware/archive/
Max NG7M
--
Matthew George
801-560-8754
> On Oct 3, 2016, at 4:47 PM, Jim McDonald wrote:
>
> Does anyone have a copy of K3 firmware V. 5.38 that I could have? Thanks
> very much.
>
>
>
> 73, Jim N7US
>
>
>
>
>
>
Does anyone have a copy of K3 firmware V. 5.38 that I could have? Thanks
very much.
73, Jim N7US
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
I just noticed that the KAT500 and KPA500 also have betas that are old but
still not latest production.
-
KC6CNN - Gerald
K1 # 0014
K2 # 5486
K3 # 6294
KX3 # 757
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-firmware-5-50-tp7619011p7619012.html
Sent from the Ele
The Firmware 5.50 has been beta for over a month. Will it be coming out as
latest production anytime soon?
Thank you
Gerald KC6CNN
-
KC6CNN - Gerald
K1 # 0014
K2 # 5486
K3 # 6294
KX3 # 757
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-firmware-5-50-tp7619011.htm
Regarding a front panel knob for AGC threshold adjustment, I have
assigned AGC Threshold and Slope as keyswitch macros to M1 tap & M1 hold
respectively. Then it's just a matter of selecting either and turning
VFO A to adjust.
73,
Drew
AF2Z
On 06/08/16 17:23, Matt Murphy wrote:
I'm not sur
I see in the K3 & KX3 Programmer's Reference (page 16) that the AGC
threshold, MN044 or MP044, is accessible via software. I have what DXLab
calls user-defined sliders for AF and RF gain and power; maybe a similar
slider could be created for AGC threshold. Or maybe a stepped macro for the
radio o
Number 1 is already there - unless you "DEMAND " that you do WHILE the computer
is sending CQ or whatever . Just press WIDTH to select I or II . K7HP -
Original Message -
> I'm not sure if this is on the list of requested firmware features, so
> I'll
> mention it here just in case:
> Requ
On Wed, 2016-06-08 at 16:23 -0500, Matt Murphy wrote:
> Request 1: I'd like to be able to adjust the RX filter shift/width
> while transmitting.
I would like to second that request as well, with a bit of a
modification... I find that I often will fire a macro off to the K3,
and because it is in t
Anything you want is “just a few lines of code” :)
Grant NQ5T
K3 #2091, KX3 #8342
> On Jun 8, 2016, at 4:59 PM, Fred Jensen wrote:
>
> Both would be neat ... however, the last time I checked, no one had yet
> invented "A Small Firmware" Change. :-)
>
> 73,
>
> Fred K6DGW
> - Northern Cal
Both would be neat ... however, the last time I checked, no one had yet
invented "A Small Firmware" Change. :-)
73,
Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org
On 6/8/2016 2:23 PM, Matt Murphy wrote:
I'm not sure if this is on the list of
I'm not sure if this is on the list of requested firmware features, so I'll
mention it here just in case:
Request 1: I'd like to be able to adjust the RX filter shift/width while
transmitting. I often take a moment to assess things like passband, RIT,
etc. when CQing during a contest, and if I'm
To all who responded.
Thanks so much.
A number of good suggestions, but the one that 'fixed me' was from Dick,
K6KR.
Everything proceeding like it should.
What a great group of first responders!
73
Dick
---
This email has been checked for viruses by Avast antivirus softwa
You test it on purpose, Dick, or ... :-)
Phil W7OX
On 8/1/15 1:07 PM, Dick Dievendorff wrote:
I test this scenario all the time. See K3 Utility Help, troubleshooting, MCU
Load failure.
73 de Dick, K6KR
Sent from my iPhone
On Aug 1, 2015, at 12:58, Dick Hanson wrote:
Hello..
Hoping I'm
Hi Dick,
You may have tried this, maybe not -
Try powering on the K3 by holding down the POWER switch on the front
panel for about 10 seconds. You should see MCU LD on the display, and
the display may not be backlighted (look closely).
If you see the MCU LD annunciator, it means the K3 is ready
I test this scenario all the time. See K3 Utility Help, troubleshooting, MCU
Load failure.
73 de Dick, K6KR
Sent from my iPhone
> On Aug 1, 2015, at 12:58, Dick Hanson wrote:
>
> Hello..
>
>
>
> Hoping I'm not the only one who's ever encountered this.
>
>
>
> I was installing 5.29 last
Hello..
Hoping I'm not the only one who's ever encountered this.
I was installing 5.29 last nite...and then we had the power go off.
That computer was not on a UPS, so both computer and K3 took the hit.
K3 is now totally unresponsive and computer can no longer 'find' it.
Suggestion
I'm running I3 utils from both Win7-64 and from Ubuntu 12.04. At
38,400 bps, neither of them take this long (4400, 2200 sec).
Are you operating that serial port at 4800 bps? You could improve
your firmware load time by increasing it to 9,600, 19,200, or 38,400.
73,
matt
W6NIA
On Thu, 23 Jul 201
Hello All
I recently ordered a KRX3A and KSYN3A board for my K3. I was running firmware
version 4.58 so I thought I'd better update it in readiness for the new
arrivals.
The computer I use for radio is 32 bit running Win98se, it works very well with
my homebrew logging program which integrates
But on an EEINIT it may get set back to ON under 5.26. That won't happen under
5.29.
Wayne
N6KR
On Jun 26, 2015, at 5:14 AM, Mike Harris wrote:
> K3 #1400 with 5.26
>
> CONFIG:EXT ALC Set to OFF t-4.0. Changed it to ON t-5.0 and cycled power,
> still ON t-5.0.
>
> Restored to OFF t-4.0 an
K3 #1400 with 5.26
CONFIG:EXT ALC Set to OFF t-4.0. Changed it to ON t-5.0 and cycled
power, still ON t-5.0.
Restored to OFF t-4.0 and after power cycle still OFF t-4.0.
So #1400 under 5.26 is behaving as it should here.
Regards,
Mike VP8NO
On 25/06/2015 23:25, Paul Kirley wrote:
My K3
Hi Paul,
Yes -- I highly recommend using rev. 5.29 for this reason. I meant to post on
this earlier.
73,
Wayne
N6KR
On Jun 25, 2015, at 7:25 PM, Paul Kirley wrote:
> My K3 serial number is 1322; it is of 2008 vintage. I loaded beta 5.26
> firmware because I installed a newly purchased KXV3B
Thanks for the report of your experience, Paul.
I've not gone to 5.29 for the reasons you stated;
now I will.
73, Phil W7OX
On 6/25/15 7:25 PM, Paul Kirley wrote:
My K3 serial number is 1322; it is of 2008 vintage. I loaded beta 5.26
firmware because I installed a newly purchased KXV3B trans
My K3 serial number is 1322; it is of 2008 vintage. I loaded beta 5.26
firmware because I installed a newly purchased KXV3B transverter/preamp
board.
Today I noticed that new firmware version 5.29 was available. When I
read the release notes, it looked like the release would not affect my
old K3
I was running my K3 remotely and accidentally turned off power before doing a
normal power down. K3 would not function properly. I had once before done
this and remotely reinstalled firmware using the K3 Utility program. That
fixed the problem.
However this time I am having problem with loading
The first cardinal rule when a peripheral or device quits working under a
Windows OS: check/reinstall the driver and look for anything that might have
changed in software. I cringe at the number of modems, sound cards, etc.
which have been thrown in the trash by people who didn't understand the
On Mon, Mar 30, 2015 at 8:02 AM, GDR wrote:
> ...This is the same computer I have been using all along with all of my
> Elecraft equipment and it worked last time,,,
I had a Windows 7 laptop that ran my station perfectly for years. Then one
day it would not send CW to my
Sort of related to your problem...
Last week I bought the PX3 for my KX3. The PX3 required a much later firmware
installed in the KX3 than was in it (I had not kept it current; if it ain't
broke, don't fix it mentality). So, I downloaded the current KX3 utility, got
the latest firmware and
Wow, that represents much work and many
improvements, Bert.
Phil W7OX
On 3/1/15 6:56 AM, Norhey wrote:
Great, thank you all who responded to my request!
In no time I got exactly what I ask for.
For all the others who might be interested too,
the complete K3 revision history can be find at:
Great, thank you all who responded to my request!
In no time I got exactly what I ask for.
For all the others who might be interested too,
the complete K3 revision history can be find at:
ftp://ftp.elecraft.com/K3/firmware/hfwnotes.rtf
73/72 de Bert, DL8BDF
___
Can someone please provide a link to Elecraft's complete list of ALL K3
firmware release notes?
I need this history in addition to the K3 Users Manual (Configuration Items!).
Thanks in advance!
73/72 de Bert, DL8BDF
__
Elecraft mailing
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
On 02/15/2015 09:19 PM, David Fleming via Elecraft wrote:
Let me try that again with fewer typos. Sometimes my typing outruns my brain.
It should be possible. I'm not sure how well a Qemu x86 VM would perform on a
mini ARM rig like a Raspberry Pi or Beaglebone. Qemu can only run on one core.
Th
Let me try that again with fewer typos. Sometimes my typing outruns my brain.
It should be possible. I'm not sure how well a Qemu x86 VM would perform on a
mini ARM rig like a Raspberry Pi or Beaglebone. Qemu can only run on one core.
That is, it can emulate multiple CPUs, but it does this in a s
15 7:58 PM
Subject: Re: [Elecraft] K3 firmware updates under Linux/ARM?
This is just a thought, but it may be possible to use Qemu to create an
i386 virtual machine and install a minimal desktop distro that you can
use the Elecraft utilities with. I did nearly the same thing here using
Virtua
I used to use Virtual Box to build VMs for task specific machines.
I'm considering going back to Linux and doing that again.
From: Nate Bargmann
To: elecraft@mailman.qth.net
Sent: Sunday, February 15, 2015 7:58 PM
Subject: Re: [Elecraft] K3 firmware updates under Linux/ARM?
This is just a thought, but it may be possible to use Qemu to create an
i386 virtual machine and install a minimal desktop distro that you can
use the Elecraft utilities with. I did nearly the same thing here using
VirtualBox on my amd64 (x86_64) desktop machine running Debian. The VM
is running
Hi,
As the current Linux/Intel desktop at my station decided take its last
breath, I am exploring the option of replacing it with an ARM based
system; either Banana Pi (ARM based computer; about $45) or Raspberry
Pi2 (about the same for $35). I have figured out everything else (dual
monitor s
I agree - why "fix" something that is not broken.
Bill W2BLC K-Line (working just fine)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman
Take 2 aspirin and call in the morning?
Seriously, something resembling that sequence happened to me not long
ago after I decided to go through all the utilities and upgrade to the
latest. I deleted as much of the install I could find, the shortcuts,
and all references and re-installed it. W
Running the latest K3 Utility
If I select download the latest firmware
The dialog box says that it's connected to the server
says to wait
Then I get invalid handle error
then the microsoft error box comes up,
then the application crashes.
Any thoughts on what gives? This been going on for a few
Soon is now.
Darryl, KK5IB
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-firmware-5-01-tp7596060p7596069.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://m
Should be there soon.
Wayne
N6KR
On Dec 16, 2014, at 9:33 AM, K5WA wrote:
> Wasn't firmware version 5.01 supposed to be posted somewhere by now? I
> don't see it in the FTP beta list. I've requested it directly a couple of
> times but I think other projects are in front of me. ;-)
>
> I'm
Wasn't firmware version 5.01 supposed to be posted somewhere by now? I
don't see it in the FTP beta list. I've requested it directly a couple of
times but I think other projects are in front of me. ;-)
I'm just dying to see why everybody is so excited about this release.
Bob K5WA
___
Hello Don,
It is prefectly understandable for a slower rate of firmware changes because K3
is now quite a mature radio. In other words, K3 is no longer a
'work-in-progress' radio.
Once a product is mature, company may spend its effort to develop next
generation product or consider additional
> I had similar issue running the firmware upgrade through my MicroHam
> microkeyer USB router.
Never perform a firmware upload to *any* rig with a microHAM interface.
Every microHAM Users Manual specifically states the interfaces are not
to be used for firmware uploads. There are several reaso
Rudi,
I had similar issue running the firmware upgrade through my MicroHam microkeyer
USB router. I am not sure if you are running your cable direct or through
another system with virtual comports. Virtual comports seem to have issue with
the firmware for the K3.
I didn't see if you mentioned
Rudi,
Did you look at the chart of error codes in the back of the manual and
tried the correction steps given for that error? That is the first step.
For ERR DSE, the correction is to reload the DSP firmware. If you tried
that and obtained the same error, download a new copy of the firmware
Dear FM,
The upload for the new firmware makes me crazy.
I get error after te DSP 02.81 version.
2 errors:
ERR DSE
ERR PL1
I noticed that the menu has strange letters but this is due to the fault
upload from de DSP firmware.
I tried different pc and have the latest version of the USB adapter.
There is a step by step procedure in K3 Utility Help, Troubleshooting, MCU Load
Failure.
Dick, K6KR
On Jun 16, 2013, at 9:14 PM, k.i...@comcast.net wrote:
>
>
> Tried to update the K3 firmware to 4.67. First, I updated the K3 Utility to
> the latest version 1.13.5.9. The moment I hit Send
Tried to update the K3 firmware to 4.67. First, I updated the K3 Utility to the
latest version 1.13.5.9. The moment I hit Send All New Firm ware to K3, the K3
went to unresponsive state with MCU LD on the LCD and the TX LED flashing.
This happened before. That time I was able to snap it from
I would also like to see a 10 MHz if option for my VLF transverter.
John Hendricks K7JLT
On May 8, 2013, at 15:04, Ken Roberson wrote:
> Hello Elecraft,
>
> I would like to request a change in the firmware that would allow me
> to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ
Hello Elecraft,
I would like to request a change in the firmware that would allow me
to Run Homebrew transverter on the new 630M band ( 472 - 479 KHZ )
I would like to use the K3 as an IF on 80 meters.
My LO is running at 3.5 mhz
Its easier to build a stable oscillator on 3.5 MHZ than the higher b
For example, I have a MicroHam interface box and it cannot be
reliably used when performing a K3 firmware load because it attempts
to interpret the data stream -- its serial port to the radio does not
simply emulate a wire.
microHAM Router can be set to not interpret the data if necessary.
Ho
Brian,
Depends entirely on the software between the virtual serial port
presented to Utility and the physical port connected to the radio.
For example, I have a MicroHam interface box and it cannot be reliably
used when performing a K3 firmware load because it attempts to interpret
the data
Guys,
Maybe this has come up before. It is now obvious that the K3 firmware
program will not work on a virtual serial port (LPBRIDGE). Tried.
For curiosity, why is that?
73 de Brian/K3KO
-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2238 / Virus Databa
Hello FM,
Thanks for the support and for the information.
I disconnected the power.
Put back my USB/RS232 cable and loaded the firmware again.
Menu's came back as described in the manual.
I did note all my settings in my manual so I could put all back in the same
way.
Now I did also safe my conf
December 03, 2012 9:31 AM
> > To: Dick Dievendorff
> > Cc: elecraft
> > Subject: Re: [Elecraft] K3 Firmware upload elapsed time
> >
> > Yes, the uploads have been faster before.Now I will try with regular
> > usb to
> > serial cable which
> > I had kept asid
ick Dievendorff
> Cc: elecraft
> Subject: Re: [Elecraft] K3 Firmware upload elapsed time
>
> Yes, the uploads have been faster before.Now I will try with regular
> usb to
> serial cable which
> I had kept aside as I wanted FSK. Now I will take the cable directly
to
> K3
&g
Yes, the uploads have been faster before.Now I will try with regular usb to
serial cable which
I had kept aside as I wanted FSK. Now I will take the cable directly to K3
instead of via P3.
I have no other PC.
Will report back.
73 de Nandu
On Mon, Dec 3, 2012 at 9:41 PM, Dick Dievendorff wrote:
>
Has that serial path worked more quickly in the past? Do you have alternatives
available to try? That load time is terrible v
Dick
On Dec 3, 2012, at 7:56 AM, Nand Kishore wrote:
> Hi Dick,
> I have been battling with an ERR TXG problem. I am in touch with support.Have
> changed LPA.
> No i
Hi Dick,
I have been battling with an ERR TXG problem. I am in touch with
support.Have changed LPA.
No improvement in out put power,cannot exceed 10w with KPA3 in line.About
0.6W with KPA3
bypassed.Various voltages taken with rf probe as advised reported back to
support.Was advised
to do ref cal ag
About five to eight minutes is normal. You may have many retries, indicating a
less than ideal RS-232 connection. Use the view menu, verbose settings for
explicit indications of each retry. Check that your cable hold down screws are
snug. Try the troubleshooting steps in K3 Utility Help for USB
Try turning on Advanced Mode in the View menu. If the link is causing
errors, they'll be annunciated on the Send MCU Firmware pane. You
should see the progress bar marking a new block of code every few
seconds.
73,
matt W6NIA
On Mon, 03 Dec 2012 19:32:42 +0530, you wrote:
>Handshake between K3
Check the bitrate between your computer and the K3. Unless there are
problems, it should run at 38kbits/S. That's when it takes just a few
minutes, but you may have yours set to a very slow speed.
HTH
73 Dave G3TJP
__
Elecraft m
No, that's not normal. It should only take a few minutes.
Dave, N4QS
Sent via BlackBerry by AT&T
-Original Message-
From: Nand Kishore
Sender: elecraft-boun...@mailman.qth.net
Date: Mon, 3 Dec 2012 18:51:44
To: elecraft
Subject: [Elecraft] K3 Firmware upload elapsed time
Wh
Turn the P3 off while loading. Others have had the same problem. Not
sure why.
73,
matt W6NIA
On Fri, 23 Nov 2012 15:27:49 + (UTC), you wrote:
>Hello, all. I had a hard drive go down and got a new computer with Windows 8
>which is very cool. However, I am unable to download new firmware
Hello, all. I had a hard drive go down and got a new computer with Windows 8
which is very cool. However, I am unable to download new firmware to the K3
with the P3 connected and turned on like I was able to do with Windows XP.
Anyone else have this problem? 73, Steve W0SZ
_
I have a Gmail email account Julian
and I received Wayne's email,
with the k3fw4r60.zip attached, just fine with no problems Julian
I sent a copy to you directly with the .zip changed to .txt
good luck, hope it works for you
Sam
K5OAI
--
View this message in context:
http://elecraft.365791.
4.60 will be going to beta status today.
73,
Wayne
N6KR
On Nov 19, 2012, at 3:48 AM, Julian, G4ILO wrote:
> The latest version in the FTP folder is 4.58, which I see has the
> 144MHz
> problem :( .
>
> If the only way to get 4.60 is by email from Wayne the problem is
> that Gmail
> doesn't a
I'm using Gmail and have used Gmail for a long time. Wayne's stuff always
comes just fine. There are a lot of Gmail users among the field testers.
The beta (it's beta, not production) is left up as long as people are
whacking on it. Sometimes additional problems are found. Once in a great
whil
The latest version in the FTP folder is 4.58, which I see has the 144MHz
problem :( .
If the only way to get 4.60 is by email from Wayne the problem is that Gmail
doesn't allow email containing .exe or .zip. It doesn't strip the attachment
out it just dumps the whole email. So if Wayne sent it I d
See Wayne's earlier email. This update fixes the 180 MHz problem with
the 144 Mhz transverter as well.
matt
--text follows--
From: Wayne Burdick
Date: Sat, 17 Nov 2012 12:50:44 -0800
I've modified the K3 software to allow use of the FM filter for ESSB
transmit. (The current beta release, 4.
The latest beta firmware appears to be dated 8 November and this issue was
raised later than that. So I guess not.
John Lemay wrote
> Is this fixed now ?
>
> Thanks
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTun
Is this fixed now ?
Thanks
John G4ZTR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: 16 November 2012 15:43
To: Geoffrey Downs
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware 4.58
Changes to a version identified to any level of testing always causes the
version number to increment. Unless they blow it and just plain forget.
:>) They're up to at least 4.60. Versions in field testing are usually
distributed by ad hoc lists and only show up in the directories when deemed
re
Has the fixed beta been posted to the web site beta area? I see version 4.58
posted. Has the version number NOT changed?
Charlie, W4FI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
]
Sent: Saturday, November 17, 2012 5:33 AM
To: Fred Smith
Cc: Wayne Burdick; Geoffrey Downs; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware 4.58 - Problem using K144XV
Well it had a bug as to the K144XV use and Wayne said he just fixed it
yesterday...so I was waiting to update.
Sent
t;
> 73,
> Fred/N0AZZ
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of hawley, charles j jr
> Sent: Saturday, November 17, 2012 5:23 AM
> To: Wayne Burdick
> Cc: Geoffrey Downs; elecraft@m
; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware 4.58 - Problem using K144XV
Has the revised beta been published yet on the web site?
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Nov 16, 2012, at 10:08 AM, "Wayne Burdick" wrote:
> I just fixed this and will
Has the revised beta been published yet on the web site?
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Nov 16, 2012, at 10:08 AM, "Wayne Burdick" wrote:
> I just fixed this and will send you the new firmware to test. It
> should be up on the web site later today.
>
> Wayne
>
I just fixed this and will send you the new firmware to test. It
should be up on the web site later today.
Wayne
N6KR
On Nov 16, 2012, at 12:56 AM, Geoffrey Downs wrote:
> Yes my K3/K144XV does the same. When it showed 181 MHz on the VFO A
> display
> (after entering 145) ERR PL1 also appea
Yes my K3/K144XV does the same. When it showed 181 MHz on the VFO A display
(after entering 145) ERR PL1 also appeared briefly on the VFO B display.
Then, after using the bandswitch to go to 2m the VFO A display started with
144.000 MHz but on subsequent visits to 2m via the bandswitch it stayed
>
>
>
>
>[Elecraft] K3 Firmware 4.58 - Problem using K144XV
>Lothar Sack
>Thu, 15 Nov 2012 14:59:08 -0800
>
>I am using my K3 with the internal transverter K144XV. Today I installed
>
>the (beta) Firmware 4.58.
>
>My problem: Entering any 2m- QRG, e.g. 1
I too now have this problem on my K3 with the K144XV installed using Beta
4.58.
Michael
n2zdb
[Elecraft] K3 Firmware 4.58 - Problem using K144XV
Lothar Sack
Thu, 15 Nov 2012 14:59:08 -0800
I am using my K3 with the internal transverter K144XV. Today I installed
the (beta
I am using my K3 with the internal transverter K144XV. Today I installed
the (beta) Firmware 4.58.
My problem: Entering any 2m- QRG, e.g. 144.300 by pushing on the front panel
"FREQ ENT" 1 4 4 . 3 0 0 "ENTER (AFX)" results in changing the K3 to
180.300 MHz
e.g. 145.525 results in 181.525 MHz ...
Bill Frantz wrote:
> Are there any improvements in CW decode and CWT which was
> impacted by the improvements AGC in version 4.51?
We're evaluating two candidate approaches for that and will pick the
best one for the next beta release.
Wayne
N6KR
>
> Cheers - Bill, AE6JV
>
> On 10/22/12 at 10
Many of us thank you for allowing AM transmit thru the 13KHz
filter. As someone who doesn't expect to use AM, except when the
need suddenly arrives, having a filter slot for it was annoying.
Now I can move the 2.7 filter next to the 13 and have 3 slots
for SSB/CW/Digital.
Are there any improve
ober 12, 2012 8:24 PM
To: Post Elecraft
Subject: [Elecraft] K3 firmware 4.51 - I want to go back one version
Help! Don't like what I am seeing with 4.51..for now just need to go
back one version.
Where can I find the previous version to load?
Thanks, John
Help! Don't like what I am seeing with 4.51..for now just need to go back
one version.
Where can I find the previous version to load?
Thanks, John
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
After I go to the firmware tab, if I click "Check Versions Now" the
utility will not proceed until the files are downloaded from Elecraft,
as there is nothing to compare. I do not get a loop of trying to connect.
Are you using version 1.12.3.28 of the utility?
HTH.
73, Mike
> Mike NF4L wrote :
Connect K3 USB FTDI cable direct to K3 and try the K3 update again.
It sounds like There is a P3 in there, that needs updating too, and has the
piggyback connection across to the K3 with the main connection to P3?
In anycase, If it is the later FTDI type usb-ser cable then this program
will
Mike NF4L wrote :
>No problems here, Ken. Some more info about Aki's problems would
probably help.
What _*exactly*_ is his issue?
Utility doesn't run? Error messages?
Utility doesn't connect to rig? Cable type? (Rs_232 or USB) Com port
number assigned in Win7?
Utility connects, but load fa
The Prolific drivers have been problematic in recent years. 73, Guy.
On Fri, Sep 28, 2012 at 1:56 PM, Brian Hunt wrote:
> I recently upgraded to a Windows 7-64 bit HP machine due to the demise
> of my Windows XP Pro laptop. The biggest problem I had was going from a
> physical RS232 serial port
I recently upgraded to a Windows 7-64 bit HP machine due to the demise
of my Windows XP Pro laptop. The biggest problem I had was going from a
physical RS232 serial port on the laptop to a USB to RS232 converter. I
tried several failures before I hit on a solution that worked. It is a
USB/RS
No problems here, Ken. Some more info about Aki's problems would
probably help.
What _*exactly*_ is his issue?
Utility doesn't run? Error messages?
Utility doesn't connect to rig? Cable type? (Rs_232 or USB) Com port
number assigned in Win7?
Utility connects, but load fails?
Wind from the No
Your post will probably produce a humungous volume of responses...I am
getting in early (12:33 AM 9/28). I have been using several machines
running WIN 7 both 32 and 64 bit with my K3 and have never had a problem
making firmware upgrades to the K3, the P3, and to the XG3. Normally I
use my 32 b
Has anyone on the list experienced problems with Win7 when attempting a K3
firmware upgrade?
My friend Aki ZL1GO has attempted the upgrade using his new Win7 computer
without success - no
problems with his old XP machine.
I have only XP, so I can't help him.
73,
Ken ZL1AIH
_
Thanks Steve.
Wayne uses this technique: current menu items are the union of the most recent
owners manual and firmware notes since the date of that owners manual.
Glad you are up to date! 4.51 is a significant release. There is some CW
decode change that should be improved in the next versio
Hi, Dick:
Thanks so much for the quick reply.
Of course, I didn't update the info in the cache so it only showed my
last upload (4.39). I
HATE getting old.
Both K3s updated to 4.51...smooth as silk.
Is there a list of menu items current through 4.51 or do I just print
the software update list
1 - 100 of 736 matches
Mail list logo
