On Thursday 20 February 2020 20:23:53 Peter C. Wallace wrote:
> On Thu, 20 Feb 2020, Gene Heskett wrote:
> > Date: Thu, 20 Feb 2020 19:47:32 -0500
> > From: Gene Heskett
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: emc-users@lists.sourceforge.net
> > Subject: Re: [Emc-users]
On Thu, 20 Feb 2020, Gene Heskett wrote:
Date: Thu, 20 Feb 2020 19:47:32 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Back to confusing puzzles.
On Thursday 20 February 2020 18:55:59 Peter C. Wallace wr
On Thursday 20 February 2020 18:55:59 Peter C. Wallace wrote:
> On Thu, 20 Feb 2020, Gene Heskett wrote:
> > Date: Thu, 20 Feb 2020 18:09:07 -0500
> > From: Gene Heskett
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: emc-users@lists.sourceforge.net
> > Subject: [Emc-users] Bac
On Thu, 20 Feb 2020, Gene Heskett wrote:
Date: Thu, 20 Feb 2020 18:09:07 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Back to confusing puzzles.
Greetings all;
I have added a 40 amp SSR in the relay box wi
Greetings all;
I have added a 40 amp SSR in the relay box with the two that are
sequencing the spindle's psu startup for a soft start, but its not
intentionally connected to those 2 other than as a power src when its
enabled. Except this one is to be enabled by the E-stop.out signal when
its
Ok.Thanks guys I see there are simpler ways to go now.
I'm a machinist forced into being a control guy at times.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
Emc-users mailing list
Emc-users@lists.sourceforg
On Tue, Feb 11, 2020 at 7:40 PM Bruce Layne
wrote:
> Maybe remove most of the oily gunk with acetone, scrub with 60-100 grit
> sandpaper to create a rough surface for the epoxy to grab, then flood
> with isopropyl alcohol to thoroughly degrease the part prior to applying
> epoxy.
Maybe clean the
This doesn't really sound like a job for a full blown Linuxcnc install, a
simple servo control and DRO should be all that's required.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Jeff Johnson
Sent: Thursd
Perhaps I misread the original request but are the associated mills controlled
by LinuxCNC? If so then Andy's comments seem perfect. If not, there are
numerous online plans for Arduino controlled indexers.
> -Original Message-
> From: Andy Pugh [mailto:bodge...@gmail.com]
> Sent: Thursda
Correct Todd..One is a Milacron 850SX and the Okuma has a Numatix control
someone retrofitted before I got it.
I think maybe some of the machines he wants to use it on might not be
running Linuxcnc.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street?
Dalton, Ohio 44618
Phone:? (330)8
On Thursday 20 February 2020 10:24:18 Andy Pugh wrote:
> > On 20 Feb 2020, at 14:25, Jeff Johnson
> > wrote:
> >
> >
> > Any thoughts or ideas on the best way to pull this off? PC? RPi4?
> > Which
>
> Why not add a 4th axis configuration to each machine that might use
> it? Then you can properly
I think maybe some of the machines he wants to use it on might not be running
Linuxcnc.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Andy Pugh
Sent: Thursday, February 20, 2020 10:24 AM
To: Enhanced Machi
> On 20 Feb 2020, at 14:25, Jeff Johnson wrote:
>
>
> Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which
Why not add a 4th axis configuration to each machine that might use it? Then
you can properly integrate the motion control?
You can actually do it with a single conf
Hello,
Owner and user of some big iron using Linux CNC. I am not a noob but close,
I started down this path 5-6 years ago and have hung Linux on three turning
centers and 1 Three axis mill.
With that being said I went through a steep learning curve on the first
machine and at the time had a ve
On Thursday 20 February 2020 07:41:41 Gene Heskett wrote:
> The build of a fresh pull of todays master is trotting right along, so
> in an hour or so there s/b fresh downloads of master (2.9.0-pre)
> available on my site. These run on raspian-10.3 armhf flavor. There
> is also a 149 meg preempt-r
The build of a fresh pull of todays master is trotting right along, so in
an hour or so there s/b fresh downloads of master (2.9.0-pre) available
on my site. These run on raspian-10.3 armhf flavor. There is also a 149
meg preempt-rt.tgz kernel. Still a 4.19.71-rt, but not a 2.5 gig dl.
Goto th
16 matches
Mail list logo